[coreboot] [PATCH] Fix LPC decode ranges on SB700
stefan.reinauer at coreboot.org
Wed Jan 26 03:03:20 CET 2011
* Rudolf Marek <r.marek at assembler.cz> [110126 00:01]:
> Attached patch fixes the LPC decode ranges of SB700. We enable early
> only Serial/SIO/RTC. Everything else needs to be done by lpc.c
> Problem was that early settings survived, because the lpc.c is doing
> ORs only...
> Hence we decode quite a lot and even strange ranges like IO port 0x4600 etc...
> Also, if some port which does not fit to predefined set is
> requested, like 0x290 for Hardware monitor, the wide port is done,
> but in our case it has range 512 bytes which means we decode in fact
> 0x290 - 0x490. And if we hit GPU in the 0x3bx range I receive MCE
> exception if I do isadump -f 0x300 which is bad.
> Therefore If I detect that the requested range is small (16 bytes) I
> additionally set the small wide io region so only 16 bytes is
> While at it, I fix spelling typos and I init the regs so we don't
> write random garbage to regs even if we don't enable them later.
> Signed-off-by: Rudolf Marek <r.marek at assembler.cz>
Acked-by: Stefan Reinauer <stefan.reinauer at coreboot.org>
More information about the coreboot