[coreboot] core boot & ehci debug

[Stefan Reinauer]

* trevor.davenport at gmail.com <trevor.davenport at gmail.com> [110127 02:56]:
> Hi,
> 
> I've been trying to get coreboot to work a machine i have (http://
> www.coreboot.org/pipermail/coreboot/2010-November/061987.html) but have so far
> have not had any luck.  I've tried most board types that are similar but all
> result in the same scenario, flash the rom, reboot....nothing on screen.
> 
> This system does not have serial port available (the closest thing on the board
> appears to be solder contacts labeled COMB).

If you are skilled with soldering or know someone close by who is, that
might be an option... 

> The southbridge is a SB700.  Is
> the EHCI Debug Port support usuable on these (the wiki says WIP but it seems
> the code is there) and do you think it would help to go this route? 
> 
> Is there anything else you could suggest in helping me make any progress on
> this board?
> 
> Cheers,
> Trevor Davenport

You will need the patch sent to the list a few minutes ago. Plus, an
Ajays NET20DC.

Stefan