[coreboot] Add NSC PC87364 support to superiotool
jankeso at gmail.com
Thu Mar 3 19:03:46 CET 2011
seems to me that the GPIO is accessed as you predicted. I attach the
output of superiorool -deV.
2011/3/2 Michael Karcher <flashrom at mkarcher.dialup.fu-berlin.de>:
> Hello jankeso,
> in the process of writing a board enable procedure for your mainboard I
> stumbled upon the fact that the chip used to control the write enable
> line is most likely your Super I/O chip, which is a NSC PC87364.
> superiotool currently does not support dumping that chip, so I can not
> verify that indeed the GPIO port of the Super I/O chip is accessed (at
> address 0x80C). I attached a patch to dump the contents of that chip to
> this mail. Please apply that patch to current superiotool CVS sources
> (to be obtained from svn://coreboot.org/repos/trunk/util/superiotool)
> and attach the output to a reply to this mail or upload to
> This mail has been cc'ed to the coreboot list for getting this patch
> included into superiotool. If something is wrong with that patch, please
> Cc: me, as I am not subscribed to the coreboot list. Thanks.
> Michael Karcher
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 6390 bytes
Desc: not available
More information about the coreboot