[coreboot] intel atom + us15

[Karl-Heinz Nirschl]

Hi,
i think the following patch should do the trick:


---
Index: src/southbridge/intel/sch/Makefile.inc
===================================================================
--- src/southbridge/intel/sch/Makefile.inc	(Revision 6439)
+++ src/southbridge/intel/sch/Makefile.inc	(Arbeitskopie)
@@ -37,6 +37,6 @@

 # We don't ship that, but booting without it is bound to fail
 cbfs-files-$(CONFIG_HAVE_CMC) += cmc.bin
-cmc.bin-file := $(CONFIG_CMC_FILE)
+cmc.bin-file := $(call strip_quotes,$(CONFIG_CMC_FILE))
 cmc.bin-type := 0xaa
 cmc.bin-position := 0xfffd0000
---


best regards,




2011/3/15 Stefan Reinauer <stefan.reinauer at coreboot.org>:
> * Anish Patel <anish.mailing.list at gmail.com> [110314 20:42]:
>> On 03/14/11 15:19, Anish Patel wrote:
>> >Hi All,
>> >    I am trying to get coreboot running on my PC/104+ atom  board.
>> >I think i have everything pretty much good to go, except for one
>> >problem.
>> >When i try to build, it says it can't find my cmc.bin file, which
>> >i have extracted from the factory bios and placed in many
>> >different locations inside the coreboot build tree.  As well as
>> >tell coreboot the location of the cmc.bin file, yet everytime i
>> >build i get this error.
>> >
>> >
>> >    GEN        bootblock/ldscript.ld
>> >    LINK       bootblock.elf
>> >    OBJCOPY    coreboot.bootblock
>> >make: *** No rule to make target `"cmc.bin"', needed by
>> >`build/coreboot.pre1'.  Stop.
>> >
>> >
>> >any hints on where to place this file would be greatly
>> >appreciared.  as a note, i have made a oprom directory in the
>> >coreboot root.  this place hold my vgabios.bin which the coreboot
>> >build system find an links properly.
>> >
>> >
>> >thanks
>> >anish
>> >
>> i have found the problem
>> reverting back the the Makefile.inc from r6199 for the sch fixed the
>> problem.
>
> Which Makefile.inc. Can you please send a patch?
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
>