[coreboot] New patch to review for coreboot: ae3a08a amd/sb600: Enable COM2 at all times in early setup
Patrick Georgi (patrick@georgi-clan.de)
gerrit at coreboot.org
Fri Oct 7 15:47:10 CEST 2011
Patrick Georgi (patrick at georgi-clan.de) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/241
-gerrit
commit ae3a08acb2fb105e35f218f810619b48f4501f76
Author: Patrick Georgi <patrick.georgi at secunet.com>
Date: Fri Oct 7 14:43:27 2011 +0200
amd/sb600: Enable COM2 at all times in early setup
Otherwise with a coreboot log on COM2 (which doesn't work) the boot
process takes eons.
Change-Id: I886f98b715c1f384c8693f2977671ff15897b5a5
Signed-off-by: Patrick Georgi <patrick.georgi at secunet.com>
---
src/southbridge/amd/sb600/early_setup.c | 9 ++++-----
1 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/src/southbridge/amd/sb600/early_setup.c b/src/southbridge/amd/sb600/early_setup.c
index 838ea31..5ffd3d8 100644
--- a/src/southbridge/amd/sb600/early_setup.c
+++ b/src/southbridge/amd/sb600/early_setup.c
@@ -53,11 +53,11 @@ static u8 get_sb600_revision(void)
/***************************************
* Legacy devices are mapped to LPC space.
-* Serial port 0
+* Serial port 0, 1
* KBC Port
* ACPI Micro-controller port
* This function does not change port 0x80 decoding.
-* Console output through any port besides 0x3f8 is unsupported.
+* Console output through any port besides 0x2f8/0x3f8 is unsupported.
* If you use FWH ROMs, you have to setup IDSEL.
* Reviewed-by: Carl-Daniel Hailfinger
* Reviewed against AMD SB600 Register Reference Manual rev. 3.03, section 3.1
@@ -84,10 +84,9 @@ static void sb600_lpc_init(void)
pci_write_config32(dev, 0x64, reg32);
dev = pci_locate_device(PCI_ID(0x1002, 0x438d), 0); /* LPC Controller */
- /* Decode port 0x3f8-0x3ff (Serial 0) */
- // XXX Serial port decode on LPC is hardcoded to 0x3f8
+ /* Decode port 0x3f8-0x3ff (Serial 0), 0x2f8-0x2ff (Serial 1) */
reg8 = pci_read_config8(dev, 0x44);
- reg8 |= 1 << 6;
+ reg8 |= (1 << 6) | (1 << 7);
pci_write_config8(dev, 0x44, reg8);
/* Decode port 0x60 & 0x64 (PS/2 keyboard) and port 0x62 & 0x66 (ACPI)*/
More information about the coreboot
mailing list