[coreboot] Issues with coreboot on MSI 6119

[Lundie]

Hi,

Need a bit of help with this.

I have rolled and flashed a coreboot rom to the above motherboard, and 
after a reboot (soft) my video bios flashed up a few times and I 
sucessfully made the SeaBIOS prompt.  However since then I have not had 
video.  I grabbed the serial console and found that coreboot seems to be 
hanging before any posts are issued, but it seems never in the same place.

I have attached the furthest it seems to get and the latest cold boot 
I've attempted - I hope they help.

The specs of the machine are:  768mb ( 3 x 256mb pc133), a ATI 3d Rage 
in the AGP slot, and a Piii 700e  (100mhz) on a flipchip (MS6905). I 
removed all other cards trying to debug this.

I'm wondering if I made a mistake in the rom so I've attached the config 
file too.

Can anyone explain what is happening here?

Regards,

Steve
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: minicom.cap.no pci devices
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20110927/b95f9e0a/attachment.ksh>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: minicom-coldboot
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20110927/b95f9e0a/attachment-0001.ksh>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: config
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20110927/b95f9e0a/attachment-0002.ksh>