No subject

after 0xC0000 segment, but it is pointing to wrong place (segment
0x32).

I don't know why it is occuring with LinuxBIOS. All appear go fine,
but just the Interrupt Pointer is wrong.

There is someone running X Server (with Driver "vesa" on X config)?
I verified this error occur with default X Server as with Xvesa.

Cheers,

Alan

P.S.: I am sending the serial console log attached, maybe it give some help.






LinuxBIOS-2.0.0_s2850_Fallback Sun Feb 25 16:10:36 BRT 2007 starting...
SBLink=00
NC node|link=00
Ram1.00
Ram2.00
Ram3
Initializing memory:  done
Ram4
v_esp=000cffe4
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to RAM.
src=fffe0000
dst=00004000
linxbios_ram.nrv2b length = 0000d7d7
linxbios_ram.bin   length = 00023150
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0_s2850_Fallback Sun Feb 25 18:34:50 BRT 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
  PCI: 00:18.3 siblings=0
CPU: APIC: 00 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 01:00.0 [1022/7460] enabled
PCI: 01:01.0 [1022/7460] enabled next_unitid: 0005
PCI: pci_scan_bus for bus 01
PCI: 01:01.0 [1022/7460] enabled
PCI: 01:02.0 [1022/7468] enabled
PCI: 01:02.1 [1022/7469] enabled
PCI: 01:02.2 [1022/746a] enabled
PCI: 01:02.3 [1022/746b] enabled
PCI: 01:02.5 [1022/746d] enabled
PCI: pci_scan_bus for bus 02
PCI: 02:00.0 [1022/7464] enabled
PCI: 02:00.1 [1022/7464] enabled
PCI: 02:0b.0 [1002/4752] enabled
PCI: 02:0d.0 [14e4/1653] enabled
PCI: 02:0e.0 [14e4/1653] enabled
PCI: pci_scan_bus returning with max=002
PNP: 002e.0 enabled
PNP: 002e.1 disabled
PNP: 002e.2 enabled
PNP: 002e.3 disabled
PNP: 002e.5 enabled
PNP: 002e.6 disabled
PNP: 002e.7 disabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
PNP: 002e.b enabled
smbus: PCI: 01:02.3[0]->I2C: 01:50 enabled
smbus: PCI: 01:02.3[0]->I2C: 01:51 enabled
smbus: PCI: 01:02.3[0]->I2C: 01:52 enabled
smbus: PCI: 01:02.3[0]->I2C: 01:53 enabled
PCI: pci_scan_bus returning with max=002
PCI: pci_scan_bus returning with max=002
done
Allocating resources...
Reading resources...
PCI: 01:01.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 02 prefmem
Done reading resources.
Allocating VGA resource PCI: 02:0b.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 01:01.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1b8 <- [0x00fd100000 - 0x00fd0fffff] prefmem <node 0 link 0>
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000002fff] io <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00fc000000 - 0x00fd0fffff] mem <node 0 link 0>
PCI: 01:01.0 1c <- [0x0000001000 - 0x0000001fff] bus 02 io
PCI: 01:01.0 20 <- [0x00fc000000 - 0x00fd0fffff] bus 02 mem
PCI: 02:00.0 10 <- [0x00fd040000 - 0x00fd040fff] mem
PCI: 02:00.1 10 <- [0x00fd041000 - 0x00fd041fff] mem
PCI: 02:0b.0 10 <- [0x00fc000000 - 0x00fcffffff] mem
PCI: 02:0b.0 14 <- [0x0000001000 - 0x00000010ff] io
PCI: 02:0b.0 18 <- [0x00fd042000 - 0x00fd042fff] mem
PCI: 02:0b.0 30 <- [0x00ffe00000 - 0x00ffe1ffff] romem
PCI: 02:0d.0 10 <- [0x00fd000000 - 0x00fd00ffff] mem64
PCI: 02:0d.0 30 <- [0x00fd010000 - 0x00fd01ffff] romem
PCI: 02:0e.0 10 <- [0x00fd020000 - 0x00fd02ffff] mem64
PCI: 02:0e.0 30 <- [0x00fd030000 - 0x00fd03ffff] romem
PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] io
PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] irq
PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] drq
PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] irq
PNP: 002e.b 60 <- [0x0000000290 - 0x0000000297] io
PNP: 002e.b 70 <- [0x0000000005 - 0x0000000005] irq
PCI: 01:02.1 20 <- [0x0000002860 - 0x000000286f] io
PCI: 01:02.2 10 <- [0x0000002840 - 0x000000285f] io
PCI: 01:02.3 58 <- [0x0000002000 - 0x00000020ff] io
PCI: 01:02.5 10 <- [0x0000002400 - 0x00000024ff] io
PCI: 01:02.5 14 <- [0x0000002800 - 0x000000283f] io
PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 140
PCI: 01:01.0 bridge ctrl <- 000b
PCI: 01:01.0 cmd <- 147
PCI: 02:00.0 subsystem <- 10f1/2850
PCI: 02:00.0 cmd <- 142
PCI: 02:00.1 subsystem <- 10f1/2850
PCI: 02:00.1 cmd <- 142
PCI: 02:0b.0 subsystem <- 10f1/2850
PCI: 02:0b.0 cmd <- 1c3
PCI: 02:0d.0 cmd <- 142
PCI: 02:0e.0 cmd <- 142
PCI: 01:02.0 subsystem <- 10f1/2850
PCI: 01:02.0 cmd <- 14f
w83627hf hwm smbus enabled
PCI: 01:02.1 subsystem <- 10f1/2850
PCI: 01:02.1 cmd <- 141
PCI: 01:02.2 subsystem <- 10f1/2850
PCI: 01:02.2 cmd <- 141
PCI: 01:02.3 subsystem <- 10f1/2850
PCI: 01:02.3 cmd <- 141
PCI: 01:02.5 subsystem <- 10f1/2850
PCI: 01:02.5 cmd <- 141
PCI: 00:18.1 subsystem <- 10f1/2850
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 10f1/2850
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
Initializing CPU #0
CPU: vendor AMD device f5a
CPU: family 0f, model 05, stepping 0a
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range:  512MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

microcode: equivalent processor rev id  = 0x004a, patch id = 0x00000000
microcode: patch id that want to apply= 0x00000047
microcode: updated to patch id = 0x00000047  success
CPU model AMD Athlon(tm) 64 FX-53 Processor
Setting up local apic... apic_id: 0x00 done.
Clearing memory 2048K - 524288K: ------- done
CPU #0 Initialized
All AP CPUs stopped
PCI: 00:18.0 init
PCI: 01:01.0 init
PCI: 02:0b.0 init
rom address for PCI: 02:0b.0 = ffe00000
copying VGA ROM Image from 0xffe00000 to 0xc0000, 0x9000 bytes
entering emulator
halt_sys: file /home/alan/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c,
line 47PCI: 01:02.0 init
amd8111: ioapic bsp_apicid = 00
RTC Init
Invalid CMOS LB checksum
enabling HPET @0xfed00000
PNP: 002e.0 init
PNP: 002e.2 init
PNP: 002e.5 init
PNP: 002e.b init
PCI: 01:02.1 init
IDE1 IDE0 PCI: 01:02.3 init
set power on after power fail
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 02:0d.0 init
rom address for PCI: 02:0d.0 = fd000000
Incorrect Expansion ROM Header Signature 14e4
PCI: 02:0e.0 init
rom address for PCI: 02:0e.0 = fd020000
Incorrect Expansion ROM Header Signature 14e4
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...done
Checking IRQ routing table consistency...
check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
/home/alan/LinuxBIOSv2/src/arch/i386/boot/pirq_routing.c:
36:check_pirq_routddone.
Wrote the mp table end at: 00000020 - 000001e8
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 00000db8  checksum 2104

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3

rom_stream: 0xffe09000 - 0xfffdffff
Found ELF candidate at offset 0
Dropping non PT_LOAD segment
New segment addr 0x10000 size 0x1ab24 offset 0x134 filesize 0x561c
(cleaned up) New segment addr 0x10000 size 0x1ab24 offset 0x134 filesize 0x561c
New segment addr 0x91000 size 0x70 offset 0x5750 filesize 0x0
(cleaned up) New segment addr 0x91000 size 0x70 offset 0x5750 filesize 0x0
New segment addr 0x100000 size 0x700000 offset 0x5750 filesize 0x1bb5f9
(cleaned up) New segment addr 0x100000 size 0x700000 offset 0x5750
filesize 0x19Loading Segment: addr: 0x000000001ffb0000 memsz:
0x000000000001ab24 filesz: 0x0cClearing Segment: addr:
0x000000001ffb561c memsz: 0x0000000000015508
Loading Segment: addr: 0x0000000000091000 memsz: 0x0000000000000070
filesz: 0x00Clearing Segment: addr: 0x0000000000091000 memsz:
0x0000000000000070
Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000700000
filesz: 0x09Clearing Segment: addr: 0x00000000002bb5f9 memsz:
0x0000000000544a07
Jumping to boot code at 0x10000
Firmware type: LinuxBIOS