> Yes, but you'd better to use southbridge/amd/cimx/sb800/, please
> reference mainboard/advansus/a785e-i.
Thanks, I was trying that, mach less success here:
coreboot-4.0-2540-g246e84b-dirty Mon Jul 16 21:17:05 MSK 2012
starting...
BSP Family_Model:
00100f42
*sysinfo range:
[000cc000,000cf360]
bsp_apicid =
00
cpu_init_detectedx = 00000000
microcode: equivalent rev id = 0x1041, current patch id = 0x00000000
microcode: rev id (1043) does not match this patch.
microcode: Not updated! Fix microcode_updates[]
POST: 0x33
cpuSetAMDMSR done
POST: 0x34
Enter amd_ht_init()
Exit amd_ht_init()
POST:
0x35
SB800 - src/southbridge/amd/cimx/sb800/early.c - get_sbdn -
Start.
SB800 - src/southbridge/amd/cimx/sb800/early.c - get_sbdn -
End.
cpuSetAMDPCI 00
done
Prep FID/VID
Node:00
F3x80:
e600e681
F3x84:
80e641e6
F3xD4:
c8810f24
F3xD8:
03001816
F3xDC:
00006322
POST:
0x36
core0
started:
start_other_cores()
init node: 00 cores:
03
Start other core - nodeid: 00 cores:
03
POST:
0x37
started ap apicid: * AP 01 timed
out:00000001
* AP 02 timed
out:00000001
* AP 03 timed
out:00000001
POST:
0x38
rs780_early_setup()
fam10_optimization()
rs780_por_init
Begin FIDVID MSR 0xc0010071 0x30b800a3
0x40035840
POST:
0x39
FIDVID on BSP, APIC_id:
00
BSP fid =
10600
Wait for AP stage 1: ap_apicid =
1
init_fidvid_bsp_stage1: timed out reading from ap
01
Wait for AP stage 1: ap_apicid =
2
init_fidvid_bsp_stage1: timed out reading from ap
02
Wait for AP stage 1: ap_apicid =
3
init_fidvid_bsp_stage1: timed out reading from ap
03
common_fid =
10600
FID Change Node:00, F3xD4:
c8810f26
POST:
0x3a
End FIDVIDMSR 0xc0010071 0x30b800a3
0x38005840
rs780_htinit
cpu_ht_freq=b.
rs780_htinit: HT3
mode
...WARM RESET...