[coreboot] PCIe devices not enabled on amd/persimmon
Andy Sharp
andywyse6 at gmail.com
Fri Jun 8 02:57:10 CEST 2012
Hi Steve,
Makes no [substantive] difference. All that does is cause 4 extra lines
to be added to the console output:
.
.
.
sb800_enable() PCI: Static device PCI: 00:15.0 not found, disabling it.
sb800_enable() PCI: Static device PCI: 00:15.1 not found, disabling it.
sb800_enable() PCI: Static device PCI: 00:15.2 not found, disabling it.
sb800_enable() PCI: Static device PCI: 00:15.3 not found, disabling it.
.
.
.
On Thu, Jun 7, 2012 at 2:54 PM, Steve Goodrich <steve.goodrich at se-eng.com>wrote:
> ARG…. Thanks, Outlook. :P****
>
> ** **
>
> Andy,****
>
> ** **
>
> Check the devicetree.cb file in your …/src/mainboard/amd/persimmon
> folder. Mine shows:****
>
> ** **
>
> device pci 15.0 off end # PCIe PortA****
>
> device pci 15.1 off end # PCIe PortB****
>
> device pci 15.2 off end # PCIe PortC****
>
> device pci 15.3 off end # PCIe PortD****
>
> ** **
>
> I’m not 100% certain, but I suspect that changing these from “off” to “on”
> will enable the devices. Try the change and see if the console output
> starts reflecting the devices you’re looking for.****
>
> ** **
>
> -- Steve G.****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* coreboot-bounces at coreboot.org [
> mailto:coreboot-bounces at coreboot.org <coreboot-bounces at coreboot.org>] *On
> Behalf Of *Andy Sharp
> *Sent:* Thursday, June 07, 2012 2:31 PM
> *To:* coreboot at coreboot.org
> *Subject:* [coreboot] PCIe devices not enabled on amd/persimmon****
>
> ** **
>
> Howdy,****
>
> ** **
>
> I've got an AMD/persimmon board, with the agesa family 14 northbridge on
> the CPU, and the SB800 southbridge. Both have 4 PCIe ports on them, but
> coreboot isn't enabling or enumerating any of the PCIe devices on the
> SB800. Does anyone have any ideas for me? The two devices on that
> southbridge are an NEC USB3 and a Mini-PCIe slot.****
>
> ** **
>
> ** **
>
> Pasting the console output below for those interested:****
>
> ** **
>
> ** **
>
> coreboot-persimmon1-278-gbbca20f-dirty Wed May 23 12:48:37 PDT 2012
> starting...****
>
> POST: 0x34****
>
> BSP Family_Model: 00500f20 ****
>
> cpu_init_detectedx = 00000000 ****
>
> POST: 0x35****
>
> agesawrapper_amdinitmmio passed.****
>
> POST: 0x37****
>
> agesawrapper_amdinitreset passed.****
>
> POST: 0x39****
>
> agesawrapper_amdinitearly POST: 0x34****
>
> BSP Family_Model: 00500f20 ****
>
> cpu_init_detectedx = 00000001 ****
>
> POST: 0x35****
>
> agesawrapper_amdinitmmio passed.****
>
> POST: 0x37****
>
> agesawrapper_amdinitreset passed.****
>
> POST: 0x39****
>
> agesawrapper_amdinitearly passed.****
>
> SLP_TYP type was 0****
>
> POST: 0x40****
>
> agesawrapper_amdinitpost ****
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> ** **
>
> EventLog: EventClass = 2, EventInfo = 8040100.****
>
> Param1 = a00a, Param2 = 0.****
>
> Param3 = 0, Param4 = 0.****
>
> SLP_TYP type was 0****
>
> error level: 4 ****
>
> POST: 0x42****
>
> agesawrapper_amdinitenv SLP_TYP type was 0****
>
> BiosAllocateBuffer BiosHeapBaseAddr: 10000****
>
> SLP_TYP type was 0****
>
> SLP_TYP type was 0****
>
> BiosAllocateBuffer BiosHeapBaseAddr: 10000****
>
> SLP_TYP type was 0****
>
> BiosAllocateBuffer BiosHeapBaseAddr: 10000****
>
> SLP_TYP type was 0****
>
> SLP_TYP type was 0
>
> SLP_TYP type was 0****
>
> passed.****
>
> POST: 0x43****
>
> POST: 0x44****
>
> POST: 0x50****
>
> Loading image.****
>
> CBFS: Looking for 'fallback/coreboot_ram'****
>
> CBFS: found.****
>
> CBFS: loading stage fallback/coreboot_ram @ 0x200000 (1441792 bytes),
> entry @ 0x200000****
>
> Jumping to image.****
>
> POST: 0x80****
>
> POST: 0x39****
>
> coreboot-persimmon1-278-gbbca20f-dirty Wed May 23 12:48:37 PDT 2012
> booting...****
>
> POST: 0x40****
>
> Enumerating buses...****
>
> Show all devs...Before device enumeration.****
>
> Root Device: enabled 1****
>
> APIC_CLUSTER: 0: enabled 1****
>
> APIC: 00: enabled 1****
>
> PCI_DOMAIN: 0000: enabled 1****
>
> PCI: 00:00.0: enabled 1****
>
> PCI: 00:01.0: enabled 1****
>
> PCI: 00:01.1: enabled 1****
>
> PCI: 00:04.0: enabled 1****
>
> PCI: 00:05.0: enabled 0****
>
> PCI: 00:06.0: enabled 0****
>
> PCI: 00:07.0: enabled 0****
>
> PCI: 00:08.0: enabled 0****
>
> PCI: 00:11.0: enabled 1****
>
> PCI: 00:12.0: enabled 1****
>
> PCI: 00:12.1: enabled 1****
>
> PCI: 00:12.2: enabled 1****
>
> PCI: 00:13.0: enabled 1****
>
> PCI: 00:13.1: enabled 1****
>
> PCI: 00:13.2: enabled 1****
>
> PCI: 00:14.0: enabled 1****
>
> I2C: 00:50: enabled 1****
>
> I2C: 00:51: enabled 1****
>
> PCI: 00:14.1: enabled 1****
>
> PCI: 00:14.2: enabled 1****
>
> PCI: 00:14.3: enabled 1****
>
> PNP: 004e.0: enabled 0****
>
> PNP: 004e.3: enabled 0****
>
> PNP: 004e.4: enabled 0****
>
> PNP: 004e.5: enabled 1****
>
> PNP: 004e.6: enabled 0****
>
> PNP: 004e.a: enabled 0****
>
> PNP: 004e.10: enabled 1****
>
> PNP: 004e.11: enabled 0****
>
> PCI: 00:14.4: enabled 1****
>
> PCI: 00:14.5: enabled 1****
>
> PCI: 00:15.0: enabled 0****
>
> PCI: 00:15.1: enabled 0****
>
> PCI: 00:15.2: enabled 0****
>
> PCI: 00:15.3: enabled 0****
>
> PCI: 00:16.0: enabled 0****
>
> PCI: 00:16.2: enabled 0****
>
> PCI: 00:18.0: enabled 1****
>
> PCI: 00:18.1: enabled 1****
>
> PCI: 00:18.2: enabled 1****
>
> PCI: 00:18.3: enabled 1****
>
> PCI: 00:18.4: enabled 1****
>
> PCI: 00:18.5: enabled 1****
>
> PCI: 00:18.6: enabled 1****
>
> PCI: 00:18.7: enabled 1****
>
> Compare with tree...****
>
> Root Device: enabled 1****
>
> APIC_CLUSTER: 0: enabled 1****
>
> APIC: 00: enabled 1****
>
> PCI_DOMAIN: 0000: enabled 1****
>
> PCI: 00:00.0: enabled 1****
>
> PCI: 00:01.0: enabled 1****
>
> PCI: 00:01.1: enabled 1****
>
> PCI: 00:04.0: enabled 1****
>
> PCI: 00:05.0: enabled 0****
>
> PCI: 00:06.0: enabled 0****
>
> PCI: 00:07.0: enabled 0****
>
> PCI: 00:08.0: enabled 0****
>
> PCI: 00:11.0: enabled 1****
>
> PCI: 00:12.0: enabled 1****
>
> PCI: 00:12.1: enabled 1****
>
> PCI: 00:12.2: enabled 1****
>
> PCI: 00:13.0: enabled 1****
>
> PCI: 00:13.1: enabled 1****
>
> PCI: 00:13.2: enabled 1****
>
> PCI: 00:14.0: enabled 1****
>
> I2C: 00:50: enabled 1****
>
> I2C: 00:51: enabled 1****
>
> PCI: 00:14.1: enabled 1****
>
> PCI: 00:14.2: enabled 1****
>
> PCI: 00:14.3: enabled 1****
>
> PNP: 004e.0: enabled 0****
>
> PNP: 004e.3: enabled 0****
>
> PNP: 004e.4: enabled 0****
>
> PNP: 004e.5: enabled 1****
>
> PNP: 004e.6: enabled 0****
>
> PNP: 004e.a: enabled 0****
>
> PNP: 004e.10: enabled 1****
>
> PNP: 004e.11: enabled 0****
>
> PCI: 00:14.4: enabled 1****
>
> PCI: 00:14.5: enabled 1****
>
> PCI: 00:15.0: enabled 0****
>
> PCI: 00:15.1: enabled 0****
>
> PCI: 00:15.2: enabled 0****
>
> PCI: 00:15.3: enabled 0****
>
> PCI: 00:16.0: enabled 0****
>
> PCI: 00:16.2: enabled 0****
>
> PCI: 00:18.0: enabled 1****
>
> PCI: 00:18.1: enabled 1****
>
> PCI: 00:18.2: enabled 1****
>
> PCI: 00:18.3: enabled 1****
>
> PCI: 00:18.4: enabled 1****
>
> PCI: 00:18.5: enabled 1****
>
> PCI: 00:18.6: enabled 1****
>
> PCI: 00:18.7: enabled 1****
>
> Mainboard Persimmon Enable.****
>
> SLP_TYP type was 0****
>
> persimmon_enable, TOP MEM: msr.lo = 0x7f000000, msr.hi = 0x00000000****
>
> persimmon_enable, TOP MEM2: msr2.lo = 0x00000000, msr2.hi = 0x00000000****
>
> persimmon_enable: uma size 0x18000000, memory start 0x67000000****
>
> scan_static_bus for Root Device****
>
> APIC_CLUSTER: 0 enabled****
>
> PCI_DOMAIN: 0000 enabled****
>
> APIC_CLUSTER: 0 scanning...****
>
> AP siblings=1****
>
> CPU: APIC: 00 enabled****
>
> CPU: APIC: 01 enabled****
>
> PCI_DOMAIN: 0000 scanning...****
>
> PCI: pci_scan_bus for bus 00****
>
> POST: 0x24****
>
> PCI: 00:00.0 [1022/1510] ops****
>
> PCI: 00:00.0 [1022/1510] enabled****
>
> PCI: 00:01.0 [1002/9804] enabled****
>
> Capability: type 0x01 @ 0x50****
>
> Capability: type 0x10 @ 0x58****
>
> Capability: type 0x05 @ 0xa0****
>
> Capability: type 0x0d @ 0xb0****
>
> Capability: type 0x08 @ 0xb8****
>
> Capability: type 0x01 @ 0x50****
>
> Capability: type 0x10 @ 0x58****
>
> PCI: 00:04.0 subordinate bus PCI Express****
>
> PCI: 00:04.0 [1022/1512] enabled****
>
> sb800_enable() SLP_TYP type was 0****
>
> PCI: 00:11.0 [1002/4393] ops****
>
> PCI: 00:11.0 [1002/4393] enabled****
>
> sb800_enable() PCI: 00:12.0 [1002/4397] ops****
>
> PCI: 00:12.0 [1002/4397] enabled****
>
> sb800_enable() PCI: Static device PCI: 00:12.1 not found, disabling it.***
> *
>
> sb800_enable() PCI: 00:12.2 [1002/4396] ops****
>
> PCI: 00:12.2 [1002/4396] enabled****
>
> sb800_enable() PCI: 00:13.0 [1002/4397] ops****
>
> PCI: 00:13.0 [1002/4397] enabled****
>
> sb800_enable() PCI: Static device PCI: 00:13.1 not found, disabling it.***
> *
>
> sb800_enable() PCI: 00:13.2 [1002/4396] ops****
>
> PCI: 00:13.2 [1002/4396] enabled****
>
> sb800_enable() sm_init().****
>
> IOAPIC: Clearing IOAPIC at 0xfec00000****
>
> IOAPIC: 23 interrupts****
>
> IOAPIC: reg 0x00000000 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000001 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000002 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000003 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000004 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000005 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000006 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000007 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000008 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000009 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000a value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000b value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000c value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000d value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000e value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000f value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000010 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000011 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000012 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000013 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000014 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000015 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000016 value 0x00000000 0x00010000****
>
> IOAPIC: Initializing IOAPIC at 0xfec00000****
>
> IOAPIC: Bootstrap Processor Local APIC = 0x00****
>
> IOAPIC: ID = 0x02****
>
> IOAPIC: 23 interrupts****
>
> IOAPIC: Enabling interrupts on FSB****
>
> IOAPIC: reg 0x00000000 value 0x00000000 0x00000700****
>
> IOAPIC: reg 0x00000001 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000002 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000003 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000004 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000005 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000006 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000007 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000008 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000009 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000a value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000b value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000c value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000d value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000e value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x0000000f value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000010 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000011 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000012 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000013 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000014 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000015 value 0x00000000 0x00010000****
>
> IOAPIC: reg 0x00000016 value 0x00000000 0x00010000****
>
> PCI: 00:14.0 [1002/4385] enabled****
>
> sb800_enable() PCI: Static device PCI: 00:14.1 not found, disabling it.***
> *
>
> sb800_enable() hda enabled****
>
> PCI: 00:14.2 [1002/4383] ops****
>
> PCI: 00:14.2 [1002/4383] enabled****
>
> sb800_enable() PCI: 00:14.3 [1002/439d] bus ops****
>
> PCI: 00:14.3 [1002/439d] enabled****
>
> sb800_enable() PCI: 00:14.4 [1002/4384] bus ops****
>
> PCI: 00:14.4 [1002/4384] enabled****
>
> sb800_enable() PCI: 00:14.5 [1002/4399] ops****
>
> PCI: 00:14.5 [1002/4399] enabled****
>
> sb800_enable() sb800_enable() sb800_enable() sb800_enable() sb800_enable()
> sb800_enable() PCI: 00:18.0 [1022/1700] enabled****
>
> PCI: 00:18.1 [1022/1701] enabled****
>
> PCI: 00:18.2 [1022/1702] enabled****
>
> PCI: 00:18.3 [1022/1703] enabled****
>
> PCI: 00:18.4 [1022/1704] enabled****
>
> PCI: 00:18.5 [1022/1718] enabled****
>
> PCI: 00:18.6 [1022/1716] enabled****
>
> PCI: 00:18.7 [1022/1719] enabled****
>
> POST: 0x25****
>
> PCI: Left over static devices:****
>
> PCI: 00:01.1****
>
> PCI: Check your devicetree.cb.****
>
> do_pci_scan_bridge for PCI: 00:04.0****
>
> PCI: pci_scan_bus for bus 01****
>
> POST: 0x24****
>
> PCI: 01:00.0 [10ec/8168] enabled****
>
> POST: 0x25****
>
> PCI: pci_scan_bus returning with max=001****
>
> POST: 0x55****
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120607/7bdf265e/attachment.html>
More information about the coreboot
mailing list