[coreboot] porting asus l1n64

[Marc Jones]

Hi Julian,

On Thu, Mar 22, 2012 at 4:19 PM, Julian Shulika <hercares at gmail.com> wrote:
> With two cpus
>
> coreboot-4.0-2135-gccee625-dirty Thu Mar 22 20:39:08 EDT 2012 starting...
>
> *sysinfo range: [000cf000,000cf730]
> bsp_apicid=00
> Enabling routing table for node 00 done.
> Enabling SMP settings
> (0,1) link=02
> (1,0) link=01
> setup_remote_node: done
> Renaming current temporary node to 01 done.
> Enabling routing table for node 01
>

This will take some debug effort on your part. The K8 coreboot code is
fairly old and doesn't have a anyone doing a lot of maintenance on it.
You will need to add debug information to the source to narrow down
the problems.

Marc



>
> 2012/3/22 Julian Shulika <hercares at gmail.com>
>>
>> Hi. Motherboard Asus L1N64 with Dual Socket 1207 and switched
>> mcp55,ite8716f,amd k8 cpus
>> I have log from serial,that's all.
>>
>> coreboot-4.0-2135-gccee625-dirty Thu Mar 22 19:21:00 EDT 2012 starting...
>> *sysinfo range: [000cf000,000cf730]
>> bsp_apicid=00
>> Enabling routing table for node 00 done.
>> Enabling SMP settings
>> 01 nodes initialized.
>> Enabling UP settings
>> coherent_ht_finalize
>> done
>> core0 started:
>>
>> I attached files from lspci,flashrom,superiotool and /proc/gpio
>> /proc/ioports
>>
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot



-- 
http://se-eng.com