[coreboot] USB Problems geode lx800

[Christian Gmeiner]

2012/10/8 Christian Gmeiner <christian.gmeiner at gmail.com>:
> HI all
>
> I am running into some usb problems with coreboot & seabios:
>
>
> init usb
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=72 align=10
> ret=0x1f7a8860 (detail=0x1f7a88b0)
> EHCI init on dev 00:0f.5 (regs=0xfe038010)
> pmm_malloc zone=0x1f7afe83 handle=ffffffff size=4096 align=1000
> ret=0x1f7bf000 (detail=0x1f7a8830)
> pmm_malloc zone=0x1f7afe83 handle=ffffffff size=68 align=80
> ret=0x1f7bef80 (detail=0x1f7a8800)
> pmm_malloc zone=0x1f7afe83 handle=ffffffff size=68 align=80
> ret=0x1f7bef00 (detail=0x1f7a87d0)
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=28 align=10
> ret=0x1f7a8780 (detail=0x1f7a87a0)
> pmm_free 0x1f7a8780 (detail=0x1f7a87a0)
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=28 align=10
> ret=0x1f7a8780 (detail=0x1f7a87a0)
> set_address 0x1f7a8860
> ehci_alloc_async_pipe 0x1f7a8860 0
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=92 align=80
> ret=0x1f7a8680 (detail=0x1f7a8750)
> ehci_control 0x1f7a86d0 (dir=0 cmd=8 data=0)
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=192 align=40
> ret=0x1f7a85c0 (detail=0x1f7a8720)
> pmm_free 0x1f7a85c0 (detail=0x1f7a8720)
> ehci_alloc_async_pipe 0x1f7a8860 0
> config_usb: 0x1f7a86d0
> ehci_control 0x1f7a86d0 (dir=128 cmd=8 data=8)
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=192 align=40
> ret=0x1f7a85c0 (detail=0x1f7a8720)
> pmm_free 0x1f7a85c0 (detail=0x1f7a8720)
> device rev=0200 cls=00 sub=00 proto=00 size=40
> ehci_alloc_async_pipe 0x1f7a8860 0
> ehci_control 0x1f7a86d0 (dir=128 cmd=8 data=9)
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=192 align=40
> ret=0x1f7a85c0 (detail=0x1f7a8720)
> pmm_free 0x1f7a85c0 (detail=0x1f7a8720)
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=32 align=10
> ret=0x1f7a8700 (detail=0x1f7a8720)
> ehci_control 0x1f7a86d0 (dir=128 cmd=8 data=32)
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=192 align=40
> ret=0x1f7a8580 (detail=0x1f7a8650)
> pmm_free 0x1f7a8580 (detail=0x1f7a8650)
> ehci_control 0x1f7a86d0 (dir=0 cmd=8 data=0)
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=192 align=40
> ret=0x1f7a8580 (detail=0x1f7a8650)
> pmm_free 0x1f7a8580 (detail=0x1f7a8650)
> ehci_alloc_async_pipe 0x1f7a8860 2
> pmm_malloc zone=0x1f7afe77 handle=ffffffff size=92 align=80
> ret=0x000ef700 (detail=0x1f7a8650)
> ehci_alloc_async_pipe 0x1f7a8860 2
> pmm_malloc zone=0x1f7afe77 handle=ffffffff size=92 align=80
> ret=0x000ef680 (detail=0x1f7a8620)
> ehci_control 0x1f7a86d0 (dir=128 cmd=8 data=1)
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=192 align=40
> ret=0x1f7a8500 (detail=0x1f7a85f0)
> pmm_free 0x1f7a8500 (detail=0x1f7a85f0)
> pmm_malloc zone=0x1f7afe7b handle=ffffffff size=48 align=10
> ret=0x000fdb30 (detail=0x1f7a85f0)
> Searching bootorder for: /pci at i0cf8/usb at f,5/storage at 2/*@0/*@0,0
> Searching bootorder for: /pci at i0cf8/usb at f,5/usb-*@2
> ehci_send_bulk qh=0x000ef680 dir=0 data=0x00006d55 size=31
> ehci_send_bulk qh=0x000ef700 dir=128 data=0x00006e3c size=36
> ehci_send_bulk qh=0x000ef700 dir=128 data=0x00006d8f size=13
> WARNING - Timeout at ehci_wait_td:542!
> ehci pipe=0x000ef700 cur=00000000 tok=00000000 next=6b80 td=0x00006b80
> status=d0d80
> USB transmission failed
> Unable to configure USB MSC drive.
> pmm_free 0x000fdb30 (detail=0x1f7a85f0)
> Unable to configure USB MSC device.
> pmm_free 0x1f7a8700 (detail=0x1f7a8720)
> pmm_free 0x1f7a8780 (detail=0x1f7a87a0)
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=28 align=10
> ret=0x1f7a8780 (detail=0x1f7a87a0)
> pmm_free 0x1f7a8780 (detail=0x1f7a87a0)
> pmm_malloc zone=0x1f7afe7f handle=ffffffff size=28 align=10
> ret=0x1f7a8780 (detail=0x1f7a87a0)
> pmm_free 0x1f7a8780 (detail=0x1f7a87a0)
> ehci_free_pipes 0x1f7a8860
> pmm_free 0x1f7a8680 (detail=0x1f7a8750)
> pmm_free 0x000ef680 (detail=0x1f7a8620)
> pmm_free 0x000ef700 (detail=0x1f7a8650)
> pmm_free 0x1f7bf000 (detail=0x1f7a8830)
> pmm_free 0x1f7bef80 (detail=0x1f7a8800)
> pmm_free 0x1f7bef00 (detail=0x1f7a87d0)
> pmm_free 0x1f7a8860 (detail=0x1f7a88b0)
> init serial
> Found 2 serial ports
> init hard drives
>
> Mabye somebody has some hints how to start debugging this and what I
> should look for.
>
added some debug to seabios:
http://dpaste.com/811158/

and tired my luck with FILO (using libpayload from coreboot):
http://dpaste.com/811165/

---
Christian Gmeiner, MSc