From hagigatali at gmail.com  Sun Sep  2 05:50:20 2012
From: hagigatali at gmail.com (ali hagigat)
Date: Sun, 2 Sep 2012 08:20:20 +0430
Subject: [coreboot] help new to coreboot
In-Reply-To: <CABoktmLE3vEbsfoDp7eAUoJoH2z-tpQ=vGFYAbeL-t7QaNZf2A@mail.gmail.com>
References: <CABoktmLE3vEbsfoDp7eAUoJoH2z-tpQ=vGFYAbeL-t7QaNZf2A@mail.gmail.com>
Message-ID: <CAKKWdtd1wH8BiQkomX9PGEGEyM-avU_KC8WvPSTcNfopvbk3kQ@mail.gmail.com>

You'd better learn English first!!


On Tue, Aug 28, 2012 at 8:18 AM, J Lee Hughes <kc0hwa at gmail.com> wrote:
> I trying to get the boot of the computer a short as possible
>
> how to see if the computer can have coreboot help it!
>
> I'm making a could from Ubuntu
> I trying to only have one system up is nothing is going on
> as it need resource the main computer will turn the other ones on!
>
> where to start if the bios can use coreboot
> yes I try to read all the paper and side of this!
>
> thanks
>
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot



From hoangtung1005 at gmail.com  Tue Sep  4 05:34:03 2012
From: hoangtung1005 at gmail.com (=?ISO-8859-1?Q?Ho=E0ng_T=F9ng?=)
Date: Tue, 4 Sep 2012 10:34:03 +0700
Subject: [coreboot] Coreboot with a Linux kernel and initramfs as
	payload.
In-Reply-To: <CAP6exYLTObvfa_V2OFiY3XV6iQNrz36UTGv7zRT1gSXdW8FMAQ@mail.gmail.com>
References: <CAP3xdAsVtL_prP0qOiZiAD5BzK8v87Rz2zt_vaz0ZniNm8A_gw@mail.gmail.com>
 <CAP6exYLTObvfa_V2OFiY3XV6iQNrz36UTGv7zRT1gSXdW8FMAQ@mail.gmail.com>
Message-ID: <CAP3xdAsWvpbocoBa7HSCtYEzffYZj_5LTD9xSC8oVie0w3mWsQ@mail.gmail.com>

Hi ron
Thank you very much for your information.

On Fri, Aug 31, 2012 at 9:41 PM, ron minnich <rminnich at gmail.com> wrote:

> It's been several years since I've done this. However, I don't believe
> mkelfimage is needed.



You need to build a kernel image that contains the kernel, initramfs,
> and command line args. If my memory is correct, this is now possible
> with the standard kernel build process and it creates and ELF file.
> Since cbfstool can parse and ELF file, you should be able to use the
> standard coreboot flow.
>
> Previously , I think I need mkelfimage to convert image kernel and
initramfs to ELF file
( I refer http://www.coreboot.org/QEMU_Build_Tutorial ).
Now I will try to build a kernel image that contains the kernel,
initramfs, and command line args.

I'm going to try to get this working anyway in a week or so so I'm
> interested to hear how it goes for you.
>
> I will inform you about my result, ASAP

> ron
>

Hoang Tung
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120904/48b0fb25/attachment.html>

From rminnich at gmail.com  Tue Sep  4 05:40:14 2012
From: rminnich at gmail.com (ron minnich)
Date: Mon, 3 Sep 2012 20:40:14 -0700
Subject: [coreboot] Coreboot with a Linux kernel and initramfs as
	payload.
In-Reply-To: <CAP3xdAsWvpbocoBa7HSCtYEzffYZj_5LTD9xSC8oVie0w3mWsQ@mail.gmail.com>
References: <CAP3xdAsVtL_prP0qOiZiAD5BzK8v87Rz2zt_vaz0ZniNm8A_gw@mail.gmail.com>
 <CAP6exYLTObvfa_V2OFiY3XV6iQNrz36UTGv7zRT1gSXdW8FMAQ@mail.gmail.com>
 <CAP3xdAsWvpbocoBa7HSCtYEzffYZj_5LTD9xSC8oVie0w3mWsQ@mail.gmail.com>
Message-ID: <CAP6exYK5OfvgXbDG4tySsVosN0KUqoYDpkYRkkvBt-g8OG48uA@mail.gmail.com>

On Mon, Sep 3, 2012 at 8:34 PM, Ho?ng T?ng <hoangtung1005 at gmail.com> wrote:

> Now I will try to build a kernel image that contains the kernel, initramfs,
> and command line args.

This should work. It has worked in the past for me.

ron



From SiYuan.Wang at amd.com  Tue Sep  4 07:33:53 2012
From: SiYuan.Wang at amd.com (Wang, SiYuan)
Date: Tue, 4 Sep 2012 05:33:53 +0000
Subject: [coreboot] git commit problem
Message-ID: <144546D30AA9C04EB96B273F86EAC37EB1EF6C@SCYBEXDAG04.amd.com>

Hi,
there is problem when I use "git commit" to commit changes. the message says:

test failed:
'build/.../static.c build/.../static.c build/.../static.ramstage.o build/.../static.romstage.o' should be 'build/.../static.c build/.../static.c build/.../static.ramstage.o build/.../static.romstage.o'

then I discard all my changes, but the problem is still there.
would somebody can help me? thank you!

--
WANG Siyuan


From mr.nuke.me at gmail.com  Tue Sep  4 13:55:13 2012
From: mr.nuke.me at gmail.com (Alex G.)
Date: Tue, 04 Sep 2012 06:55:13 -0500
Subject: [coreboot] git commit problem
In-Reply-To: <144546D30AA9C04EB96B273F86EAC37EB1EF6C@SCYBEXDAG04.amd.com>
References: <144546D30AA9C04EB96B273F86EAC37EB1EF6C@SCYBEXDAG04.amd.com>
Message-ID: <5045EC21.3070706@gmail.com>

We need the complete git command(s) and complete git output.

Alex

On 09/04/2012 12:33 AM, Wang, SiYuan wrote:
> Hi,
> there is problem when I use "git commit" to commit changes. the message says:
> 
> test failed:
> 'build/.../static.c build/.../static.c build/.../static.ramstage.o build/.../static.romstage.o' should be 'build/.../static.c build/.../static.c build/.../static.ramstage.o build/.../static.romstage.o'
> 
> then I discard all my changes, but the problem is still there.
> would somebody can help me? thank you!
> 
> --
> WANG Siyuan
> 




From stefan.reinauer at coreboot.org  Wed Sep  5 03:14:34 2012
From: stefan.reinauer at coreboot.org (Stefan Reinauer)
Date: Wed, 5 Sep 2012 03:14:34 +0200
Subject: [coreboot] git commit problem
In-Reply-To: <144546D30AA9C04EB96B273F86EAC37EB1EF6C@SCYBEXDAG04.amd.com>
References: <144546D30AA9C04EB96B273F86EAC37EB1EF6C@SCYBEXDAG04.amd.com>
Message-ID: <20120905011433.GA1500@coreboot.org>

* Wang, SiYuan <SiYuan.Wang at amd.com> [120904 07:33]:
> Hi,
> there is problem when I use "git commit" to commit changes. the message says:
> 
> test failed:
> 'build/.../static.c build/.../static.c build/.../static.ramstage.o build/.../static.romstage.o' should be 'build/.../static.c build/.../static.c build/.../static.ramstage.o build/.../static.romstage.o'
> 
> then I discard all my changes, but the problem is still there.
> would somebody can help me? thank you!

Hi,

your git repository path contains a sym link... the current version of
the commit hook does not like that..

I think you can fix the issue with:
mv util/lint/lint-stable-002-build-dir-handling \
     util/lint/lint-002-build-dir-handling




From gerrit at coreboot.org  Wed Sep  5 03:40:47 2012
From: gerrit at coreboot.org (gerrit at coreboot.org)
Date: Wed, 5 Sep 2012 03:40:47 +0200
Subject: [coreboot] Patch merged into coreboot/master: f9db41b buildsystem:
	Make CPU microcode updating more configurable
References: <I38d0c9851691aa112e93031860e94895857ebb76+0@gerrit.coreboot.org>
Message-ID: <E1T94bn-00032w-LE@ra.coresystems.de>

the following patch was just integrated into master:
commit f9db41bf4575235910a6488d840127c2be7b449f
Author: Alexandru Gagniuc <mr.nuke.me at gmail.com>
Date:   Fri Jul 20 00:11:21 2012 -0500

    buildsystem: Make CPU microcode updating more configurable
    
    This patch aims to improve the microcode in CBFS handling that was
    brought by the last patches from Stefan and the Chromium team.
    
    Choices in Kconfig
      - 1) Generate microcode from tree (default)
      - 2) Include external microcode file
      - 3) Do not put microcode in CBFS
    
    The idea is to give the user full control over including non-free
    blobs in the final ROM image.
    
    MICROCODE_INCLUDE_PATH Kconfig variable is eliminated. Microcode
    is handled by a special class, cpu_microcode, as such:
    
    cpu_microcode-y += microcode_file.c
    
    MICROCODE_IN_CBFS should, in the future, be eliminated. Right now it is
    needed by intel microcode updating. Once all intel cpus are converted to
    cbfs updating, this variable can go away.
    
    These files are then compiled and assembled into a binary CBFS file.
    The advantage of doing it this way versus the current method is that
      1) The rule is CPU-agnostic
      2) Gives user more control over if and how to include microcode blobs
      3) The rules for building the microcode binary are kept in
       src/cpu/Makefile.inc, and thus would not clobber the other makefiles,
       which are already overloaded and very difficult to navigate.
    
    Change-Id: I38d0c9851691aa112e93031860e94895857ebb76
    Signed-off-by: Alexandru Gagniuc <mr.nuke.me at gmail.com>

Reviewed-By: Patrick Georgi <patrick at georgi-clan.de> at Thu Aug 30 11:27:17 2012, giving +2
Build-Tested: build bot (Jenkins) at Mon Aug 27 09:09:48 2012, giving +1
Reviewed-By: Anton Kochkov <anton.kochkov at gmail.com> at Mon Aug 27 09:13:56 2012, giving +1
Reviewed-By: Alexandru Gagniuc <mr.nuke.me at gmail.com> at Wed Aug 29 02:18:34 2012, giving +2
See http://review.coreboot.org/1245 for details.

-gerrit



From gerrit at coreboot.org  Wed Sep  5 03:43:03 2012
From: gerrit at coreboot.org (gerrit at coreboot.org)
Date: Wed, 5 Sep 2012 03:43:03 +0200
Subject: [coreboot] Patch merged into coreboot/master: df28e7e VIA Nano: Add
	support for VIA Nano CPUs
References: <I586aaca5715e047b42ef901d66772ace0e6b655e+0@gerrit.coreboot.org>
Message-ID: <E1T94dz-0003Xi-CO@ra.coresystems.de>

the following patch was just integrated into master:
commit df28e7ec541ab07bdf1814720c4302e7b2bab1ba
Author: Alexandru Gagniuc <mr.nuke.me at gmail.com>
Date:   Tue Aug 7 19:38:32 2012 -0500

    VIA Nano: Add support for VIA Nano CPUs
    
    Add code to do the following for the VIA Nano CPUs
    - Update microcode
    - Set maximum frequency
    - Initialize power states
    - Set up cache
    
    Attempting to change the voltage or frequency of the CPU without
    applying the microcode update will hang the CPU, so we only do
    transitions if we can verify the microcode has been updated.
    
    The microcode is updated directly from CBFS. No microcode is
    included in ramstage. The microcode is not included in this
    commit.
    
    To get the microcode, run bios_extract on the manufacturer supplied
    BIOS, and look for the file marked "P6 Microcode". Include this
    file in CBFS.
    You can have the build system include this file automatically by
    selecting Expert Mode, then look under
    'Chipset' -> 'Include CPU microcode in CBFS' ->
    Include external microcode file (check)
    'Path and filename of CPU microcode' should contain the location of
    the microcode file previously extracted.
    
    Change-Id: I586aaca5715e047b42ef901d66772ace0e6b655e
    Signed-off-by: Alexandru Gagniuc <mr.nuke.me at gmail.com>

Build-Tested: build bot (Jenkins) at Mon Aug 27 09:30:54 2012, giving +1
Reviewed-By: Alexandru Gagniuc <mr.nuke.me at gmail.com> at Wed Sep  5 03:43:02 2012, giving +2
See http://review.coreboot.org/1257 for details.

-gerrit



From anton.kochkov at gmail.com  Wed Sep  5 05:00:09 2012
From: anton.kochkov at gmail.com (=?UTF-8?B?0JDQvdGC0L7QvSDQmtC+0YfQutC+0LI=?=)
Date: Wed, 5 Sep 2012 07:00:09 +0400
Subject: [coreboot] Fintek F81865 patch
In-Reply-To: <alpine.LRH.2.02.1208311217320.30333@tuju.fi>
References: <alpine.LRH.2.02.1208310854500.30333@tuju.fi>
 <alpine.LRH.2.02.1208311217320.30333@tuju.fi>
Message-ID: <CA+8M6wmgOrLMKPEacp7fuYBKMNXZDDM4iM6f=vsLptx17=gsSA@mail.gmail.com>

Hello!
Post it on gerrit please http://www.coreboot.org/Git

Best regards,
Anton Kochkov.



On Fri, Aug 31, 2012 at 1:18 PM, Juha Tuomala <Juha.Tuomala at iki.fi> wrote:

>
>
>
>
> On Fri, 31 Aug 2012, Juha Tuomala wrote:
>
>> Below is a patch for Fintek f81865 superio register dump.
>>
>> Datasheet: http://www.fintek.com.tw/**files/productfiles/F81865_**
>> V028P.pdf <http://www.fintek.com.tw/files/productfiles/F81865_V028P.pdf>
>> Patch url: http://tuju.fi/tmp/f81865.**patch<http://tuju.fi/tmp/f81865.patch>
>>
>> diff --git a/util/superiotool/fintek.c b/util/superiotool/fintek.c
>> index fc1d3f2..8703f68 100644
>>
>
>
> Well, those defaults were different for each uart, so fixed them, patch
> url file has been changed to match patch below:
>
>
> diff --git a/util/superiotool/fintek.c b/util/superiotool/fintek.c
> index fc1d3f2..f5a01de 100644
>
> --- a/util/superiotool/fintek.c
> +++ b/util/superiotool/fintek.c
> @@ -279,6 +279,54 @@ static const struct superio_registers reg_table[] = {
>                         {0x00,NANA,NANA,NANA,NANA,**NANA,EOT}},
>                 {EOT}}},
>         {0x0407, "F81865F/F-I", {
> +               {NOLDN, NULL,
> +                       {0x02,0x07,0x20,0x21,0x23,**
> 0x24,0x25,0x26,0x27,0x28,0x29,**0x2a-1,0x2a-2,0x2b,0x2c,0x2d,**EOT},
> +                       {NANA,0x00,0x07,0x04,0x19,**
> 0x34,NANA,NANA,NANA,0x00,0x00,**0x00,0x00,0x1f,0x00,0x08,EOT}}**,
> +               {0x00, "FDC",
> +                       {0x30,0x60,0x61,0x70,0x74,**0xf0,0xf2,0xf4,EOT},
> +                       {NANA,0x03,0xf0,NANA,NANA,**NANA,NANA,NANA,EOT}},
> +               {0x03, "LPT",
> +                       {0x30,0x60,0x61,0x70,0x74,**0xf0,EOT},
> +                       {NANA,0x03,0x78,NANA,NANA,**NANA,EOT}},
> +               {0x04, "HWMON",
> +                       {0x30,0x60,0x61,0x70,EOT},
> +                       {NANA,0x02,0x95,NANA,EOT}},
> +               {0x05, "KBC",
> +                       {0x30,0x60,0x61,0x70,0x72,**0xfe,0xf0,EOT},
> +                       {NANA,0x00,0x60,NANA,NANA,**NANA,0x71,EOT}},
> +               {0x06, "GPIO",
> +                       {0x30,0x60,0x61,0x70,0xf1,**
> 0xf2,0xf3,0xf3,0xf4,0xf5,0xf6,**0xf7,0xf8,0xf9,0xe0,0xe1,0xe2,**
> 0xe3,0xef,0xd0,0xd1,0xd2,0xd3,**0xc0,0xc1,0xc2,0xc3,0xb0,0xb1,**
> 0xb2,0xb3,0xa0,0xa1,0xa2,0xa3,**0x90,0x91,0x92,0x93,EOT},
> +                       {NANA,0x00,0x60,NANA,0x00,**
> NANA,0x00,0x00,0x00,0x00,0x00,**0x00,0x00,0x00,0x00,0xff,NANA,**
> 0x00,NANA,0x00,0xff,NANA,0x00,**0x00,0xff,NANA,0x00,0x00,0xff,**
> NANA,0x00,0x00,0xff,NANA,0x00,**NANA,NANA,NANA,NANA,EOT}},
> +               {0x07, "WDT",
> +                       {0x30,0x60,0x61,0xf5,0xf6,**0xfa,EOT},
> +                       {NANA,0x00,0x00,0x00,0x00,**NANA,EOT}},
> +               {0x08, "SPI",
> +                       {0xf0,0xf1,0xf2,0xf3,0xf4,**
> 0xf5,0xf6,0xf7,0xf8,0xfa,0xfb,**0xfc,0xfd,0xfe,0xff,EOT},
> +                       {0x10,0x04,NANA,NANA,0x00,**
> 0x00,NANA,NANA,0x00,0x00,0x00,**0x00,0x00,0x00,0x00,EOT}},
> +               {0x0a, "PME & ACPI",
> +                       {0x30,0xf0,0xf1,0xf2,0xf3,**0xf4,0xf5,0xf6,EOT},
> +                       {NANA,NANA,NANA,NANA,NANA,**0x06,NANA,0x00,EOT}},
> +               {0x0b, "RTC",
> +                       {0x30,0x60,0x61,0x70,EOT},
> +                       {NANA,0x00,0x00,NANA,EOT}},
> +               {0x10, "UART1",
> +                       {0x30,0x60,0x61,0x70,0xf0,**0xf2,0xf4,0xf5,EOT},
> +                       {NANA,0x03,0xf8,NANA,NANA,**NANA,0x00,0x00,EOT}},
> +               {0x11, "UART2",
> +                       {0x30,0x60,0x61,0x70,0xf0,**0xf2,0xf4,0xf5,EOT},
> +                       {NANA,0x02,0xf8,NANA,NANA,**NANA,0x00,0x00,EOT}},
>
> +               {0x12, "UART3",
> +                       {0x30,0x60,0x61,0x70,0xf0,**0xf2,0xf4,0xf5,EOT},
> +                       {NANA,0x03,0xe8,NANA,NANA,**NANA,0x00,0x00,EOT}},
>
> +               {0x13, "UART4",
> +                       {0x30,0x60,0x61,0x70,0xf0,**0xf2,0xf4,0xf5,EOT},
> +                       {NANA,0x02,0xe8,NANA,NANA,**NANA,0x00,0x00,EOT}},
>
> +               {0x14, "UART5",
> +                       {0x30,0x60,0x61,0x70,0xf0,**0xf2,0xf4,0xf5,EOT},
> +                       {NANA,0x00,0x00,NANA,NANA,**NANA,0x00,0x00,EOT}},
>
> +               {0x15, "UART6",
> +                       {0x30,0x60,0x61,0x70,0xf0,**0xf2,0xf4,0xf5,EOT},
> +                       {NANA,0x00,0x00,NANA,NANA,**NANA,0x00,0x00,EOT}},
>
>                 {EOT}}},
>         {EOT}
>  };
>
>
>
> Tuju
> --
> S??st?misen ja ahkeroinnin tilalle syntyi varsinkin 1960-luvulta l?htien
> oman
> onnellisuuden ymp?rill? py?riv?, vastuuton ajattelutapa, joka korostaa
> oikeuksia
> velvollisuuksien sijaan. - Paul Lillrank
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120905/7b337f5f/attachment.html>

From gerrit at coreboot.org  Thu Sep  6 09:15:38 2012
From: gerrit at coreboot.org (Siyuan Wang (wangsiyuanbuaa@gmail.com))
Date: Thu, 6 Sep 2012 09:15:38 +0200
Subject: [coreboot] New patch to review for coreboot: fb86753 agesa
	family15: change some files according to tyans8226
References: <I467add50eec89b6e05bfb005c0bc78418530d4b0+0@gerrit.coreboot.org>
Message-ID: <I467add50eec89b6e05bfb005c0bc78418530d4b0+1@gerrit.coreboot.org>

Siyuan Wang (wangsiyuanbuaa at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1493

-gerrit

commit fb8675395e969cc48bba6f557735916bc85b1046
Author: Siyuan Wang <wangsiyuanbuaa at gmail.com>
Date:   Thu Sep 6 12:17:36 2012 +0800

    agesa family15: change  some files according to tyans8226
    
    in northbridge.c change apic id to adjust two cpus, I change this according to agesa:
    http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/vendorcode/amd/agesa/f15/Proc/CPU/cpuApicUtilities.c;hb=HEAD#l273
    273 line of this file.
    change a Kconfig and Makefile.inc to adjust tyan s8226
    change Platform.h to remove some warnings.
    
    Change-Id: I467add50eec89b6e05bfb005c0bc78418530d4b0
    Signed-off-by: Siyuan Wang <SiYuan.Wang at amd.com>
    Signed-off-by: Siyuan Wang <wangsiyuanbuaa at gmail.com>
---
 src/cpu/amd/agesa/family15/Kconfig               | 2 +-
 src/northbridge/amd/agesa/family15/northbridge.c | 2 +-
 src/southbridge/amd/cimx/sb700/Platform.h        | 6 ++++++
 src/vendorcode/amd/agesa/f15/Makefile.inc        | 2 +-
 4 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/src/cpu/amd/agesa/family15/Kconfig b/src/cpu/amd/agesa/family15/Kconfig
index c1528f6..9f44a40 100644
--- a/src/cpu/amd/agesa/family15/Kconfig
+++ b/src/cpu/amd/agesa/family15/Kconfig
@@ -29,7 +29,7 @@ config CPU_AMD_SOCKET_G34
 	help
 	  AMD G34 Socket
 
-config CPU_AMD_SOCKET_C32
+config CPU_AMD_AGESA_SOCKET_C32
 	bool
 	default n
 	help
diff --git a/src/northbridge/amd/agesa/family15/northbridge.c b/src/northbridge/amd/agesa/family15/northbridge.c
index da67af4..6329224 100644
--- a/src/northbridge/amd/agesa/family15/northbridge.c
+++ b/src/northbridge/amd/agesa/family15/northbridge.c
@@ -1071,7 +1071,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max)
 				lapicid_start = (lapicid_start + 1) * core_max;
 				printk(BIOS_SPEW, "lpaicid_start=0x%x ", lapicid_start);
 			}
-			u32 apic_id = (lapicid_start * (i/modules + 1)) + ((i % modules) ? (j + (siblings + 1)) : j);
+			u32 apic_id = (i * core_max) + j + lapicid_start;
 			printk(BIOS_SPEW, "node 0x%x core 0x%x apicid=0x%x\n",
 					i, j, apic_id);
 
diff --git a/src/southbridge/amd/cimx/sb700/Platform.h b/src/southbridge/amd/cimx/sb700/Platform.h
index d70345d..906e86e 100644
--- a/src/southbridge/amd/cimx/sb700/Platform.h
+++ b/src/southbridge/amd/cimx/sb700/Platform.h
@@ -61,8 +61,14 @@ void    TraceCode ( UINT32 Level, UINT32 Code);
 #endif
 #else
 	#if CONFIG_REDIRECT_SBCIMX_TRACE_TO_SERIAL
+		#ifdef TRACE
+			#undef TRACE
+		#endif
 		#define TRACE(Arguments) printk Arguments
 	#else
+		#ifdef TRACE
+			#undef TRACE
+		#endif
 		#define TRACE(Arguments) do {} while(0)
 	#endif
 	#define TRACECODE(Arguments)
diff --git a/src/vendorcode/amd/agesa/f15/Makefile.inc b/src/vendorcode/amd/agesa/f15/Makefile.inc
index 1f3ba51..62a50af 100644
--- a/src/vendorcode/amd/agesa/f15/Makefile.inc
+++ b/src/vendorcode/amd/agesa/f15/Makefile.inc
@@ -390,7 +390,7 @@ agesa_lib_src  += ./Proc/Recovery/HT/htInitReset.c
 agesa_lib_src  += ./Proc/Mem/Main/mmflow.c
 agesa_lib_src  += ./Proc/Mem/Main/OR/mmflowor.c
 agesa_lib_src  += ./Proc/Mem/Ps/OR/mpor3.c
-ifeq ($(CONFIG_CPU_AMD_SOCKET_C32), y)
+ifeq ($(CONFIG_CPU_AMD_AGESA_SOCKET_C32), y)
 	agesa_lib_src  += ./Proc/Mem/Main/C32/mmflowC32.c
 	agesa_lib_src  += ./Proc/Mem/Ps/OR/C32/mpLorC3.c
 	agesa_lib_src  += ./Proc/Mem/Ps/OR/C32/mpRorC3.c



From gerrit at coreboot.org  Thu Sep  6 09:15:38 2012
From: gerrit at coreboot.org (Siyuan Wang (wangsiyuanbuaa@gmail.com))
Date: Thu, 6 Sep 2012 09:15:38 +0200
Subject: [coreboot] New patch to review for coreboot: 5b07e72 superio
	winbond w83627dhg: add a function which is used on tyan s8226
References: <I5f7fa535b922b224e381886f1bea64623fa549ef+0@gerrit.coreboot.org>
Message-ID: <I5f7fa535b922b224e381886f1bea64623fa549ef+1@gerrit.coreboot.org>

Siyuan Wang (wangsiyuanbuaa at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1494

-gerrit

commit 5b07e7289d1f09c4f69fbc75f367955cf2ce83d2
Author: Siyuan Wang <wangsiyuanbuaa at gmail.com>
Date:   Thu Sep 6 12:19:03 2012 +0800

    superio winbond w83627dhg: add a function which is used on tyan s8226
    
    this function is used on serial output of tyan s8226
    
    Change-Id: I5f7fa535b922b224e381886f1bea64623fa549ef
    Signed-off-by: Siyuan Wang <SiYuan.Wang at amd.com>
    Signed-off-by: Siyuan Wang <wangsiyuanbuaa at gmail.com>
---
 src/superio/winbond/w83627dhg/early_serial.c | 10 ++++++++++
 src/superio/winbond/w83627dhg/w83627dhg.h    |  1 +
 2 files changed, 11 insertions(+)

diff --git a/src/superio/winbond/w83627dhg/early_serial.c b/src/superio/winbond/w83627dhg/early_serial.c
index e0be8de..39ce8bf 100644
--- a/src/superio/winbond/w83627dhg/early_serial.c
+++ b/src/superio/winbond/w83627dhg/early_serial.c
@@ -67,3 +67,13 @@ void w83627dhg_enable_i2c(device_t dev)
 	pnp_exit_ext_func_mode(dev);
 }
 
+void w83627dhg_set_clksel_48(device_t dev)
+{
+	u8 reg8;
+
+	pnp_enter_ext_func_mode(dev);
+	reg8 = pnp_read_config(dev, 0x24);
+	reg8 |= (1 << 6); /* Set CLKSEL (clock input on pin 1) to 48MHz. */
+	pnp_write_config(dev, 0x24, reg8);
+	pnp_exit_ext_func_mode(dev);
+}
diff --git a/src/superio/winbond/w83627dhg/w83627dhg.h b/src/superio/winbond/w83627dhg/w83627dhg.h
index 158e60b..3aa1b26 100644
--- a/src/superio/winbond/w83627dhg/w83627dhg.h
+++ b/src/superio/winbond/w83627dhg/w83627dhg.h
@@ -56,5 +56,6 @@ void pnp_enter_ext_func_mode(device_t dev);
 void pnp_exit_ext_func_mode(device_t dev);
 void w83627dhg_enable_serial(device_t dev, u16 iobase);
 void w83627dhg_enable_i2c(device_t dev);
+void w83627dhg_set_clksel_48(device_t dev);
 
 #endif



From gerrit at coreboot.org  Thu Sep  6 09:15:38 2012
From: gerrit at coreboot.org (Siyuan Wang (wangsiyuanbuaa@gmail.com))
Date: Thu, 6 Sep 2012 09:15:38 +0200
Subject: [coreboot] New patch to review for coreboot: f2c04be add tyan
	s8226: add a new mainboard
References: <I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608+0@gerrit.coreboot.org>
Message-ID: <I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608+1@gerrit.coreboot.org>

Siyuan Wang (wangsiyuanbuaa at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1495

-gerrit

commit f2c04be068f7aa4ba7b77ad9f3526e1f5b6ff894
Author: Siyuan Wang <wangsiyuanbuaa at gmail.com>
Date:   Thu Sep 6 16:56:18 2012 +0800

    add tyan s8226: add a new mainboard
    
    our code supports tyan s8226 now, which has two cpus on the board
    the cpu socket is C32. The details of tyan s8226 is:
    http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=679&SKU=600000190
    
    Change-Id: I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608
    Signed-off-by: Siyuan Wang <SiYuan.Wang at amd.com>
    Signed-off-by: Siyuan Wang <wangsiyuanbuaa at gmail.com>
---
 src/mainboard/tyan/Kconfig                |    4 +-
 src/mainboard/tyan/s8226/BiosCallOuts.c   |  516 ++
 src/mainboard/tyan/s8226/BiosCallOuts.h   |   78 +
 src/mainboard/tyan/s8226/Kconfig          |  127 +
 src/mainboard/tyan/s8226/Makefile.inc     |   45 +
 src/mainboard/tyan/s8226/OptionsIds.h     |   67 +
 src/mainboard/tyan/s8226/acpi/ide.asl     |  244 +
 src/mainboard/tyan/s8226/acpi/routing.asl |  222 +
 src/mainboard/tyan/s8226/acpi/sata.asl    |  149 +
 src/mainboard/tyan/s8226/acpi/usb.asl     |  161 +
 src/mainboard/tyan/s8226/acpi_tables.c    |  319 ++
 src/mainboard/tyan/s8226/agesawrapper.c   | 1204 +++++
 src/mainboard/tyan/s8226/agesawrapper.h   |   87 +
 src/mainboard/tyan/s8226/buildOpts.c      |  616 +++
 src/mainboard/tyan/s8226/cmos.layout      |  118 +
 src/mainboard/tyan/s8226/devicetree.cb    |  128 +
 src/mainboard/tyan/s8226/dimmSpd.c        |  222 +
 src/mainboard/tyan/s8226/dsdt.asl         | 1794 +++++++
 src/mainboard/tyan/s8226/dsdt.asl.ami     | 7818 +++++++++++++++++++++++++++++
 src/mainboard/tyan/s8226/fadt.c           |  174 +
 src/mainboard/tyan/s8226/get_bus_conf.c   |  144 +
 src/mainboard/tyan/s8226/irq_tables.c     |  122 +
 src/mainboard/tyan/s8226/mainboard.c      |   78 +
 src/mainboard/tyan/s8226/mptable.c        |  196 +
 src/mainboard/tyan/s8226/platform_cfg.h   |   54 +
 src/mainboard/tyan/s8226/platform_oem.c   |   50 +
 src/mainboard/tyan/s8226/rd890_cfg.c      |  274 +
 src/mainboard/tyan/s8226/rd890_cfg.h      |  174 +
 src/mainboard/tyan/s8226/reset.c          |   66 +
 src/mainboard/tyan/s8226/romstage.c       |  148 +
 src/mainboard/tyan/s8226/sb700_cfg.c      |  142 +
 src/mainboard/tyan/s8226/sb700_cfg.h      |  237 +
 32 files changed, 15777 insertions(+), 1 deletion(-)

diff --git a/src/mainboard/tyan/Kconfig b/src/mainboard/tyan/Kconfig
index 01e4f35..25e3069 100644
--- a/src/mainboard/tyan/Kconfig
+++ b/src/mainboard/tyan/Kconfig
@@ -51,7 +51,8 @@ config BOARD_TYAN_S4880
 	bool "S4880 (Thunder K8QS)"
 config BOARD_TYAN_S4882
 	bool "S4882 (Thunder K8QS Pro)"
-
+config BOARD_TYAN_S8226
+        bool "S8226"
 endchoice
 
 source "src/mainboard/tyan/s1846/Kconfig"
@@ -69,6 +70,7 @@ source "src/mainboard/tyan/s2912/Kconfig"
 source "src/mainboard/tyan/s2912_fam10/Kconfig"
 source "src/mainboard/tyan/s4880/Kconfig"
 source "src/mainboard/tyan/s4882/Kconfig"
+source "src/mainboard/tyan/s8226/Kconfig"
 
 config MAINBOARD_VENDOR
 	string
diff --git a/src/mainboard/tyan/s8226/BiosCallOuts.c b/src/mainboard/tyan/s8226/BiosCallOuts.c
new file mode 100644
index 0000000..b7f0124
--- /dev/null
+++ b/src/mainboard/tyan/s8226/BiosCallOuts.c
@@ -0,0 +1,516 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "agesawrapper.h"
+#include "amdlib.h"
+#include "BiosCallOuts.h"
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+
+STATIC BIOS_CALLOUT_STRUCT BiosCallouts[REQUIRED_CALLOUTS] =
+{
+	{
+		AGESA_ALLOCATE_BUFFER,
+		BiosAllocateBuffer
+	},
+
+	{
+		AGESA_DEALLOCATE_BUFFER,
+		BiosDeallocateBuffer
+	},
+
+	{
+		AGESA_DO_RESET,
+		BiosReset
+	},
+
+	{
+		AGESA_LOCATE_BUFFER,
+		BiosLocateBuffer
+	},
+
+	{
+		AGESA_READ_SPD,
+		BiosReadSpd
+	},
+
+	{
+		AGESA_READ_SPD_RECOVERY,
+		BiosDefaultRet
+	},
+
+	{
+		AGESA_RUNFUNC_ONAP,
+		BiosRunFuncOnAp
+	},
+
+	{
+		AGESA_GET_IDS_INIT_DATA,
+		BiosGetIdsInitData
+	},
+
+	{
+		AGESA_HOOKBEFORE_DQS_TRAINING,
+		BiosHookBeforeDQSTraining
+	},
+
+	{
+		AGESA_HOOKBEFORE_DRAM_INIT,
+		BiosHookBeforeDramInit
+	},
+	{
+		AGESA_HOOKBEFORE_EXIT_SELF_REF,
+		BiosHookBeforeExitSelfRefresh
+	},
+};
+
+extern AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info);
+
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINTN i;
+	AGESA_STATUS CalloutStatus;
+
+	for (i = 0; i < REQUIRED_CALLOUTS; i++) {
+		if (BiosCallouts[i].CalloutName == Func) {
+			break;
+		}
+	}
+
+	if(i >= REQUIRED_CALLOUTS) {
+		return AGESA_UNSUPPORTED;
+	}
+
+	CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
+
+	return CalloutStatus;
+}
+
+
+CONST IDS_NV_ITEM IdsData[] =
+{
+	/*{
+	  AGESA_IDS_NV_MAIN_PLL_CON,
+	  0x1
+	  },
+	  {
+	  AGESA_IDS_NV_MAIN_PLL_FID_EN,
+	  0x1
+	  },
+	  {
+	  AGESA_IDS_NV_MAIN_PLL_FID,
+	  0x8
+	  },
+
+	  {
+	  AGESA_IDS_NV_CUSTOM_NB_PSTATE,
+	  },
+	  {
+	  AGESA_IDS_NV_CUSTOM_NB_P0_DIV_CTRL,
+	  },
+	  {
+	  AGESA_IDS_NV_CUSTOM_NB_P1_DIV_CTRL,
+	  },
+	  {
+	  AGESA_IDS_NV_FORCE_NB_PSTATE,
+	  },
+	 */
+	{
+		0xFFFF,
+		0xFFFF
+	}
+};
+
+#define   NUM_IDS_ENTRIES    (sizeof (IdsData) / sizeof (IDS_NV_ITEM))
+
+AGESA_STATUS BiosGetIdsInitData (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINTN   i;
+	IDS_NV_ITEM *IdsPtr;
+
+	IdsPtr = ((IDS_CALLOUT_STRUCT *) ConfigPtr)->IdsNvPtr;
+
+	if (Data == IDS_CALLOUT_INIT) {
+		for (i = 0; i < NUM_IDS_ENTRIES; i++) {
+			IdsPtr[i].IdsNvValue = IdsData[i].IdsNvValue;
+			IdsPtr[i].IdsNvId = IdsData[i].IdsNvId;
+		}
+	}
+	return AGESA_SUCCESS;
+}
+
+
+AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINT32              AvailableHeapSize;
+	UINT8               *BiosHeapBaseAddr;
+	UINT32              CurrNodeOffset;
+	UINT32              PrevNodeOffset;
+	UINT32              FreedNodeOffset;
+	UINT32              BestFitNodeOffset;
+	UINT32              BestFitPrevNodeOffset;
+	UINT32              NextFreeOffset;
+	BIOS_BUFFER_NODE   *CurrNodePtr;
+	BIOS_BUFFER_NODE   *FreedNodePtr;
+	BIOS_BUFFER_NODE   *BestFitNodePtr;
+	BIOS_BUFFER_NODE   *BestFitPrevNodePtr;
+	BIOS_BUFFER_NODE   *NextFreePtr;
+	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
+	AGESA_BUFFER_PARAMS *AllocParams;
+
+	AllocParams = ((AGESA_BUFFER_PARAMS *) ConfigPtr);
+	AllocParams->BufferPointer = NULL;
+
+	AvailableHeapSize = BIOS_HEAP_SIZE - sizeof (BIOS_HEAP_MANAGER);
+	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+	if (BiosHeapBasePtr->StartOfAllocatedNodes == 0) {
+		/* First allocation */
+		CurrNodeOffset = sizeof (BIOS_HEAP_MANAGER);
+		CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+		CurrNodePtr->BufferHandle = AllocParams->BufferHandle;
+		CurrNodePtr->BufferSize = AllocParams->BufferLength;
+		CurrNodePtr->NextNodeOffset = 0;
+		AllocParams->BufferPointer = (UINT8 *) CurrNodePtr + sizeof (BIOS_BUFFER_NODE);
+
+		/* Update the remaining free space */
+		FreedNodeOffset = CurrNodeOffset + CurrNodePtr->BufferSize + sizeof (BIOS_BUFFER_NODE);
+		FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+		FreedNodePtr->BufferSize = AvailableHeapSize - sizeof (BIOS_BUFFER_NODE) - CurrNodePtr->BufferSize;
+		FreedNodePtr->NextNodeOffset = 0;
+
+		/* Update the offsets for Allocated and Freed nodes */
+		BiosHeapBasePtr->StartOfAllocatedNodes = CurrNodeOffset;
+		BiosHeapBasePtr->StartOfFreedNodes = FreedNodeOffset;
+	} else {
+		/* Find out whether BufferHandle has been allocated on the heap. */
+		/* If it has, return AGESA_BOUNDS_CHK */
+		CurrNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+		CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+
+		while (CurrNodeOffset != 0) {
+			CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+			if (CurrNodePtr->BufferHandle == AllocParams->BufferHandle) {
+				return AGESA_BOUNDS_CHK;
+			}
+			CurrNodeOffset = CurrNodePtr->NextNodeOffset;
+			/* If BufferHandle has not been allocated on the heap, CurrNodePtr here points
+			   to the end of the allocated nodes list.
+			 */
+
+		}
+		/* Find the node that best fits the requested buffer size */
+		FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
+		PrevNodeOffset = FreedNodeOffset;
+		BestFitNodeOffset = 0;
+		BestFitPrevNodeOffset = 0;
+		while (FreedNodeOffset != 0) {
+			FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+			if (FreedNodePtr->BufferSize >= (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
+				if (BestFitNodeOffset == 0) {
+					/* First node that fits the requested buffer size */
+					BestFitNodeOffset = FreedNodeOffset;
+					BestFitPrevNodeOffset = PrevNodeOffset;
+				} else {
+					/* Find out whether current node is a better fit than the previous nodes */
+					BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
+					if (BestFitNodePtr->BufferSize > FreedNodePtr->BufferSize) {
+						BestFitNodeOffset = FreedNodeOffset;
+						BestFitPrevNodeOffset = PrevNodeOffset;
+					}
+				}
+			}
+			PrevNodeOffset = FreedNodeOffset;
+			FreedNodeOffset = FreedNodePtr->NextNodeOffset;
+		} /* end of while loop */
+
+
+		if (BestFitNodeOffset == 0) {
+			/* If we could not find a node that fits the requested buffer */
+			/* size, return AGESA_BOUNDS_CHK */
+			return AGESA_BOUNDS_CHK;
+		} else {
+			BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
+			BestFitPrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitPrevNodeOffset);
+
+			/* If BestFitNode is larger than the requested buffer, fragment the node further */
+			if (BestFitNodePtr->BufferSize > (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
+				NextFreeOffset = BestFitNodeOffset + AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE);
+
+				NextFreePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextFreeOffset);
+				NextFreePtr->BufferSize = BestFitNodePtr->BufferSize - (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE));
+				NextFreePtr->NextNodeOffset = BestFitNodePtr->NextNodeOffset;
+			} else {
+				/* Otherwise, next free node is NextNodeOffset of BestFitNode */
+				NextFreeOffset = BestFitNodePtr->NextNodeOffset;
+			}
+
+			/* If BestFitNode is the first buffer in the list, then update
+			   StartOfFreedNodes to reflect the new free node
+			 */
+			if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) {
+				BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset;
+			} else {
+				BestFitPrevNodePtr->NextNodeOffset = NextFreeOffset;
+			}
+
+			/* Add BestFitNode to the list of Allocated nodes */
+			CurrNodePtr->NextNodeOffset = BestFitNodeOffset;
+			BestFitNodePtr->BufferSize = AllocParams->BufferLength;
+			BestFitNodePtr->BufferHandle = AllocParams->BufferHandle;
+			BestFitNodePtr->NextNodeOffset = 0;
+
+			/* Remove BestFitNode from list of Freed nodes */
+			AllocParams->BufferPointer = (UINT8 *) BestFitNodePtr + sizeof (BIOS_BUFFER_NODE);
+		}
+	}
+
+	return AGESA_SUCCESS;
+}
+
+AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+
+	UINT8               *BiosHeapBaseAddr;
+	UINT32              AllocNodeOffset;
+	UINT32              PrevNodeOffset;
+	UINT32              NextNodeOffset;
+	UINT32              FreedNodeOffset;
+	UINT32              EndNodeOffset;
+	BIOS_BUFFER_NODE   *AllocNodePtr;
+	BIOS_BUFFER_NODE   *PrevNodePtr;
+	BIOS_BUFFER_NODE   *FreedNodePtr;
+	BIOS_BUFFER_NODE   *NextNodePtr;
+	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
+	AGESA_BUFFER_PARAMS *AllocParams;
+
+	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+	AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
+
+	/* Find target node to deallocate in list of allocated nodes.
+	   Return AGESA_BOUNDS_CHK if the BufferHandle is not found
+	 */
+	AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+	AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+	PrevNodeOffset = AllocNodeOffset;
+
+	while (AllocNodePtr->BufferHandle !=  AllocParams->BufferHandle) {
+		if (AllocNodePtr->NextNodeOffset == 0) {
+			return AGESA_BOUNDS_CHK;
+		}
+		PrevNodeOffset = AllocNodeOffset;
+		AllocNodeOffset = AllocNodePtr->NextNodeOffset;
+		AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+	}
+
+	/* Remove target node from list of allocated nodes */
+	PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
+	PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
+
+	/* Zero out the buffer, and clear the BufferHandle */
+	LibAmdMemFill ((UINT8 *)AllocNodePtr + sizeof (BIOS_BUFFER_NODE), 0, AllocNodePtr->BufferSize, &(AllocParams->StdHeader));
+	AllocNodePtr->BufferHandle = 0;
+	AllocNodePtr->BufferSize += sizeof (BIOS_BUFFER_NODE);
+
+	/* Add deallocated node in order to the list of freed nodes */
+	FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
+	FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+
+	EndNodeOffset = AllocNodeOffset + AllocNodePtr->BufferSize;
+
+	if (AllocNodeOffset < FreedNodeOffset) {
+		/* Add to the start of the freed list */
+		if (EndNodeOffset == FreedNodeOffset) {
+			/* If the freed node is adjacent to the first node in the list, concatenate both nodes */
+			AllocNodePtr->BufferSize += FreedNodePtr->BufferSize;
+			AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset;
+
+			/* Clear the BufferSize and NextNodeOffset of the previous first node */
+			FreedNodePtr->BufferSize = 0;
+			FreedNodePtr->NextNodeOffset = 0;
+
+		} else {
+			/* Otherwise, add freed node to the start of the list
+			   Update NextNodeOffset and BufferSize to include the
+			   size of BIOS_BUFFER_NODE
+			 */
+			AllocNodePtr->NextNodeOffset = FreedNodeOffset;
+		}
+		/* Update StartOfFreedNodes to the new first node */
+		BiosHeapBasePtr->StartOfFreedNodes = AllocNodeOffset;
+	} else {
+		/* Traverse list of freed nodes to find where the deallocated node
+		   should be place
+		 */
+		NextNodeOffset = FreedNodeOffset;
+		NextNodePtr = FreedNodePtr;
+		while (AllocNodeOffset > NextNodeOffset) {
+			PrevNodeOffset = NextNodeOffset;
+			if (NextNodePtr->NextNodeOffset == 0) {
+				break;
+			}
+			NextNodeOffset = NextNodePtr->NextNodeOffset;
+			NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
+		}
+
+		/* If deallocated node is adjacent to the next node,
+		   concatenate both nodes
+		 */
+		if (NextNodeOffset == EndNodeOffset) {
+			NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
+			AllocNodePtr->BufferSize += NextNodePtr->BufferSize;
+			AllocNodePtr->NextNodeOffset = NextNodePtr->NextNodeOffset;
+
+			NextNodePtr->BufferSize = 0;
+			NextNodePtr->NextNodeOffset = 0;
+		} else {
+			/*AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset; */
+			AllocNodePtr->NextNodeOffset = NextNodeOffset;
+		}
+		/* If deallocated node is adjacent to the previous node,
+		   concatenate both nodes
+		 */
+		PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
+		EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize;
+		if (AllocNodeOffset == EndNodeOffset) {
+			PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
+			PrevNodePtr->BufferSize += AllocNodePtr->BufferSize;
+
+			AllocNodePtr->BufferSize = 0;
+			AllocNodePtr->NextNodeOffset = 0;
+		} else {
+			PrevNodePtr->NextNodeOffset = AllocNodeOffset;
+		}
+	}
+	return AGESA_SUCCESS;
+}
+
+AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINT32              AllocNodeOffset;
+	UINT8               *BiosHeapBaseAddr;
+	BIOS_BUFFER_NODE   *AllocNodePtr;
+	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
+	AGESA_BUFFER_PARAMS *AllocParams;
+
+	AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
+
+	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+	AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+	AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+
+	while (AllocParams->BufferHandle != AllocNodePtr->BufferHandle) {
+		if (AllocNodePtr->NextNodeOffset == 0) {
+			AllocParams->BufferPointer = NULL;
+			AllocParams->BufferLength = 0;
+			return AGESA_BOUNDS_CHK;
+		} else {
+			AllocNodeOffset = AllocNodePtr->NextNodeOffset;
+			AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+		}
+	}
+
+	AllocParams->BufferPointer = (UINT8 *) ((UINT8 *) AllocNodePtr + sizeof (BIOS_BUFFER_NODE));
+	AllocParams->BufferLength = AllocNodePtr->BufferSize;
+
+	return AGESA_SUCCESS;
+
+}
+
+AGESA_STATUS BiosRunFuncOnAp (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS        Status;
+
+	Status = agesawrapper_amdlaterunaptask (Data, ConfigPtr);
+	return Status;
+}
+
+AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS        Status;
+	UINT8                 Value;
+	UINTN               ResetType;
+	AMD_CONFIG_PARAMS   *StdHeader;
+
+	ResetType = Data;
+	StdHeader = ConfigPtr;
+
+	//
+	// Perform the RESET based upon the ResetType. In case of
+	// WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to
+	// AmdResetManager. During the critical condition, where reset is required
+	// immediately, the reset will be invoked directly by writing 0x04 to port
+	// 0xCF9 (Reset Port).
+	//
+	switch (ResetType) {
+		case WARM_RESET_WHENEVER:
+		case COLD_RESET_WHENEVER:
+			break;
+
+		case WARM_RESET_IMMEDIATELY:
+		case COLD_RESET_IMMEDIATELY:
+			Value = 0x06;
+			LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader);
+			break;
+
+		default:
+			break;
+	}
+
+	Status = 0;
+	return Status;
+}
+
+AGESA_STATUS BiosReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS Status;
+	Status = AmdMemoryReadSPD (Func, Data, ConfigPtr);
+
+	return Status;
+}
+
+AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_UNSUPPORTED;
+}
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_SUCCESS;
+}
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_SUCCESS;
+}
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_SUCCESS;
+}
+
diff --git a/src/mainboard/tyan/s8226/BiosCallOuts.h b/src/mainboard/tyan/s8226/BiosCallOuts.h
new file mode 100644
index 0000000..24a05fb
--- /dev/null
+++ b/src/mainboard/tyan/s8226/BiosCallOuts.h
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef _BIOS_CALLOUT_H_
+#define _BIOS_CALLOUT_H_
+
+#include "Porting.h"
+#include "AGESA.h"
+
+#define REQUIRED_CALLOUTS		12
+#define BIOS_HEAP_START_ADDRESS		0x00010000
+#define BIOS_HEAP_SIZE			0x20000   /* 64MB */
+
+typedef struct _BIOS_HEAP_MANAGER {
+	//UINT32 AvailableSize;
+	UINT32 StartOfAllocatedNodes;
+	UINT32 StartOfFreedNodes;
+} BIOS_HEAP_MANAGER;
+
+typedef struct _BIOS_BUFFER_NODE {
+	UINT32 BufferHandle;
+	UINT32 BufferSize;
+	UINT32 NextNodeOffset;
+} BIOS_BUFFER_NODE;
+
+/*
+ * CALLOUTS
+ */
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/* REQUIRED CALLOUTS
+ * AGESA ADVANCED CALLOUTS - CPU
+ */
+AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosRunFuncOnAp (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosGetIdsInitData (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/* AGESA ADVANCED CALLOUTS - MEMORY */
+AGESA_STATUS BiosReadSpd (UINT32  Func,UINT32  Data,VOID *ConfigPtr);
+
+/* BIOS DEFAULT RET */
+AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+#define SB_GPIO_REG02   2
+#define SB_GPIO_REG09   9
+#define SB_GPIO_REG10   10
+#define SB_GPIO_REG15   15
+#define SB_GPIO_REG17   17
+#define SB_GPIO_REG21   21
+#define SB_GPIO_REG25   25
+#define SB_GPIO_REG28   28
+#endif //_BIOS_CALLOUT_H_
+
diff --git a/src/mainboard/tyan/s8226/Kconfig b/src/mainboard/tyan/s8226/Kconfig
new file mode 100644
index 0000000..11217c8
--- /dev/null
+++ b/src/mainboard/tyan/s8226/Kconfig
@@ -0,0 +1,127 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+if BOARD_TYAN_S8226
+
+config BOARD_SPECIFIC_OPTIONS
+	def_bool y
+	select ARCH_X86
+	select CPU_AMD_AGESA_FAMILY15
+	select CPU_AMD_AGESA_SOCKET_C32
+	select NORTHBRIDGE_AMD_AGESA_FAMILY15_ROOT_COMPLEX
+	select NORTHBRIDGE_AMD_AGESA_FAMILY15
+	select NORTHBRIDGE_AMD_CIMX_RD890
+	select SOUTHBRIDGE_AMD_CIMX_SB700
+	select SUPERIO_WINBOND_W83627DHG
+	select SUPERIO_NUVOTON_WPCM450
+	select DRIVERS_I2C_W83795
+	select UDELAY_TSC
+	select BOARD_HAS_FADT
+	select HAVE_BUS_CONFIG
+	select HAVE_OPTION_TABLE
+	select HAVE_PIRQ_TABLE
+	select HAVE_MP_TABLE
+	select HAVE_HARD_RESET
+	select SERIAL_CPU_INIT
+	select HAVE_ACPI_TABLES
+	select BOARD_ROMSIZE_KB_4096
+	select TINY_BOOTBLOCK
+	#select MMCONF_SUPPORT_DEFAULT #TODO enable it to resolve Multicore IO conflict
+
+config MAINBOARD_DIR
+	string
+	default tyan/s8226
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "S8226"
+
+config HW_MEM_HOLE_SIZEK
+	hex
+	default 0x200000
+
+config MAX_CPUS
+	int
+	default 64
+
+config MAX_PHYSICAL_CPUS
+	int
+	default 16
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+	bool
+	default n
+
+config MEM_TRAIN_SEQ
+	int
+	default 2
+
+config IRQ_SLOT_COUNT
+	int
+	default 11
+
+config RAMTOP
+	hex
+	default 0x1000000
+
+config HEAP_SIZE
+	hex
+	default 0xc0000
+
+config STACK_SIZE
+	hex
+	default 0x10000
+
+config ACPI_SSDTX_NUM
+	int
+	default 0
+
+config RAMBASE
+	hex
+	default 0x200000
+
+config SIO_PORT
+	hex
+	default 0x164E
+	help
+		though UARTs are on the NUVOTON BMC, port 0x164E
+		PS2 keyboard and mouse are on SUPERIO_WINBOND_W83627DHG, port 0x2E
+
+config DRIVERS_PS2_KEYBOARD
+	bool
+	default y
+
+config WARNINGS_ARE_ERRORS
+	bool
+	default n
+
+config ONBOARD_VGA_IS_PRIMARY
+	bool
+	default y
+
+config VGA_BIOS
+	bool
+	default n
+
+config VGA_BIOS_ID
+	string
+	depends on VGA_BIOS
+	default "1a03,2000"
+
+endif # BOARD_TYAN_S8226
diff --git a/src/mainboard/tyan/s8226/Makefile.inc b/src/mainboard/tyan/s8226/Makefile.inc
new file mode 100644
index 0000000..d49289b
--- /dev/null
+++ b/src/mainboard/tyan/s8226/Makefile.inc
@@ -0,0 +1,45 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+romstage-$(CONFIG_NORTHBRIDGE_AMD_CIMX_RD890) += rd890_cfg.c
+romstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += sb700_cfg.c
+romstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += reset.c
+romstage-y += buildOpts.c
+romstage-y += agesawrapper.c
+romstage-y += dimmSpd.c
+romstage-y += BiosCallOuts.c
+romstage-y += platform_oem.c
+
+ramstage-$(CONFIG_NORTHBRIDGE_AMD_CIMX_RD890) += rd890_cfg.c
+ramstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += sb700_cfg.c
+ramstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += reset.c
+ramstage-y += buildOpts.c
+ramstage-y += agesawrapper.c
+ramstage-y += dimmSpd.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += platform_oem.c
+
+AGESA_PREFIX ?= $(src)/vendorcode/amd/agesa
+CIMX_PREFIX ?= $(src)/vendorcode/amd/cimx
+AGESA_ROOT ?= $(AGESA_PREFIX)/f15
+NB_CIMX_ROOT ?= $(CIMX_PREFIX)/rd890
+SB_CIMX_ROOT ?= $(CIMX_PREFIX)/sb700
+
+subdirs-y += ../../../../$(AGESA_ROOT)
+
diff --git a/src/mainboard/tyan/s8226/OptionsIds.h b/src/mainboard/tyan/s8226/OptionsIds.h
new file mode 100644
index 0000000..0784e7f
--- /dev/null
+++ b/src/mainboard/tyan/s8226/OptionsIds.h
@@ -0,0 +1,67 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 12067 $   @e \$Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $
+ */
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ *  This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ *    IDSOPT_IDS_ENABLED
+ *    IDSOPT_ERROR_TRAP_ENABLED
+ *    IDSOPT_CONTROL_ENABLED
+ *    IDSOPT_TRACING_ENABLED
+ *    IDSOPT_PERF_ANALYSIS
+ *    IDSOPT_ASSERT_ENABLED
+ *    IDS_DEBUG_PORT
+ *    IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ *
+ **/
+
+#define IDSOPT_IDS_ENABLED     TRUE
+//#define IDSOPT_CONTROL_ENABLED TRUE
+//#define IDSOPT_TRACING_ENABLED TRUE
+//#define IDSOPT_PERF_ANALYSIS   TRUE
+#define IDSOPT_ASSERT_ENABLED  TRUE
+//#define CONFIG_REDIRECT_IDS_HDT_CONSOLE_TO_SERIAL TRUE
+//#undef IDSOPT_DEBUG_ENABLED
+//#define IDSOPT_DEBUG_ENABLED  FALSE
+//#undef IDSOPT_HOST_SIMNOW
+//#define IDSOPT_HOST_SIMNOW    FALSE
+//#undef IDSOPT_HOST_HDT
+//#define IDSOPT_HOST_HDT       FALSE
+//#define IDS_DEBUG_PORT    0x80
+
+#endif
diff --git a/src/mainboard/tyan/s8226/acpi/ide.asl b/src/mainboard/tyan/s8226/acpi/ide.asl
new file mode 100644
index 0000000..c79c18c
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/ide.asl
@@ -0,0 +1,244 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(IDEC) {
+			Name(_ADR, 0x00140001)
+			#include "ide.asl"
+		}
+	}
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){ /* Udma timing table */
+	120, 90, 60, 45, 30, 20, 15, 0	/* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){ /* MWDma timing table */
+	480, 150, 120, 0	/* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){ /* Pio timing table */
+	600, 390, 270, 180, 120, 0	/* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){ /* MWDma timing register table */
+	0x77, 0x21, 0x20, 0xFF	/* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+	0x99, 0x47, 0x34, 0x22, 0x20, 0x99	/* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+	Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+	PPTS, 8,	/* Primary PIO Slave Timing */
+	PPTM, 8,	/* Primary PIO Master Timing */
+	OFFSET(0x04), PMTS, 8,	/* Primary MWDMA Slave Timing */
+	PMTM, 8,	/* Primary MWDMA Master Timing */
+	OFFSET(0x08), PPCR, 8,	/* Primary PIO Control */
+	OFFSET(0x0A), PPMM, 4,	/* Primary PIO master Mode */
+	PPSM, 4,	/* Primary PIO slave Mode */
+	OFFSET(0x14), PDCR, 2,	/* Primary UDMA Control */
+	OFFSET(0x16), PDMM, 4,	/* Primary UltraDMA Mode */
+	PDSM, 4,	/* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1) /* get total time*/
+{
+	Store(And(Arg0, 0x0F), Local0)	/* Recovery Width */
+	Increment(Local0)
+	Store(ShiftRight(Arg0, 4), Local1)	/* Command Width */
+	Increment(Local1)
+	Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+	Name (_ADR, Zero)
+	Method(_GTM, 0)
+	{
+		NAME(OTBF, Buffer(20) { /* out buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(OTBF, 0, PSD0)   /* PIO spd0 */
+		CreateDwordField(OTBF, 4, DSD0)   /* DMA spd0 */
+		CreateDwordField(OTBF, 8, PSD1)   /* PIO spd1 */
+		CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+		/* Just return if the channel is disabled */
+		If(And(PPCR, 0x01)) { /* primary PIO control */
+			Return(OTBF)
+		}
+
+		/* Always tell them independent timing available and IOChannelReady used on both drives */
+		Or(BFFG, 0x1A, BFFG)
+
+		Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming  to PIO spd0 */
+		Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing  to PIO spd1 */
+
+		If(And(PDCR, 0x01)) {	/* It's under UDMA mode */
+			Or(BFFG, 0x01, BFFG)
+			Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+		}
+		Else {
+			Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing,  DmaSpd0 */
+		}
+
+		If(And(PDCR, 0x02)) {	/* It's under UDMA mode */
+			Or(BFFG, 0x04, BFFG)
+			Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+		}
+		Else {
+			Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing,  DmaSpd0 */
+		}
+
+		Return(OTBF) /* out buffer */
+	}				/* End Method(_GTM) */
+
+	Method(_STM, 3, NotSerialized)
+	{
+		NAME(INBF, Buffer(20) { /* in buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(INBF, 0, PSD0)    /* PIO spd0 */
+		CreateDwordField(INBF, 4, DSD0)   /* PIO spd0 */
+		CreateDwordField(INBF, 8, PSD1)   /* PIO spd1 */
+		CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+		Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+		Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
+		Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+		Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
+
+		Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+		Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+		If(And(BFFG, 0x01)) {	/* Drive 0 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDMM,)
+			Or(PDCR, 0x01, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTM)
+			}
+		}
+
+		If(And(BFFG, 0x04)) {	/* Drive 1 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDSM,)
+			Or(PDCR, 0x02, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTS)
+			}
+		}
+		/* Return(INBF) */
+	}		/*End Method(_STM) */
+	Device(MST)
+	{
+		Name(_ADR, 0)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xA0, CMDA)
+			Store(0xA0, CMDB)
+			Store(0xA0, CMDC)
+
+			Or(PPMM, 0x08, POMD)
+
+			If(And(PDCR, 0x01)) {
+				Or(PDMM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTM),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}		/* End Device(MST) */
+
+	Device(SLAV)
+	{
+		Name(_ADR, 1)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xB0, CMDA)
+			Store(0xB0, CMDB)
+			Store(0xB0, CMDC)
+
+			Or(PPSM, 0x08, POMD)
+
+			If(And(PDCR, 0x02)) {
+				Or(PDSM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTS),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}			/* End Device(SLAV) */
+}
diff --git a/src/mainboard/tyan/s8226/acpi/routing.asl b/src/mainboard/tyan/s8226/acpi/routing.asl
new file mode 100644
index 0000000..8bc06f6
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/routing.asl
@@ -0,0 +1,222 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "routing.asl"
+	}
+*/
+
+/* Routing is in System Bus scope */
+Scope(\_SB) {
+	Name(PR0, Package(){
+		/* NB devices */
+		/* Bus 0, Dev 0 - SR5650 HT */
+		Package() { 0xFFFF, Zero, INTA, Zero },
+
+		/* Bus 0, Dev 1 - CLKCONFIG */
+
+		/* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot */
+		Package() {0x0002FFFF, 0, INTE, 0 },
+
+		/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+
+		/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+		Package() {0x0004FFFF, 0, INTE, 0 },
+
+		/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+
+		/* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
+
+		/* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
+
+		/* Bus 0, Dev 8 - Southbridge port (normally hidden) */
+
+		/* Bus 0, Dev 9 - PCIe Bridge */
+
+		/* Bus 0, Dev a - PCIe Bridge */
+
+		/* Bus 0, Dev b - PCIe Bridge */
+		Package() {0x000BFFFF, 0, INTG, 0 },
+
+		/* Bus 0, Dev c - PCIe Bridge */
+		Package() {0x000CFFFF, 0, INTG, 0 },
+
+		/* Bus 0, Dev d - PCIe Bridge for Intel 82576 Giga NIC*/
+		Package() {0x000DFFFF, 0, INTG, 0 },
+
+		/* SB devices */
+		/* Bus 0, Dev 17 - SATA controller */
+		Package() {0x0011FFFF, 0, INTG, 0 },
+
+		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+		 * EHCI, dev 18, 19 func 2 */
+		Package() {0x0012FFFF, 0, INTA, 0 },
+		Package() {0x0012FFFF, 1, INTB, 0 },
+		Package() {0x0012FFFF, 2, INTC, 0 },
+		Package() {0x0012FFFF, 3, INTD, 0 },
+
+		Package() {0x0013FFFF, 0, INTC, 0 },
+		Package() {0x0013FFFF, 1, INTD, 0 },
+		Package() {0x0013FFFF, 2, INTA, 0 },
+		Package() {0x0013FFFF, 2, INTB, 0 },
+
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
+		Package(){0x0014FFFF, 0, INTA, 0 },
+		Package(){0x0014FFFF, 1, INTB, 0 },
+		Package(){0x0014FFFF, 2, INTC, 0 },
+		Package(){0x0014FFFF, 3, INTD, 0 },
+	})
+
+	Name(APR0, Package(){
+		/* NB devices in APIC mode */
+		/* Bus 0, Dev 0 - SR5650 HT */
+		Package() { 0xFFFF, Zero, Zero, 16 },
+
+		/* Bus 0, Dev 1 - CLKCONFIG */
+
+		/* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot (GFX0) */
+		Package() {0x0002FFFF, 0, 0, 0x34 },
+
+		/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+
+		/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+		Package() {0x0004FFFF, 0, 0, 0x34 },
+
+		/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+
+		/* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
+
+		/* Bus 0, Dev 7 - PCIe Bridge */
+
+		/* Bus 0, Dev 8 - Southbridge port (normally hidden) */
+
+		/* Bus 0, Dev 9 - PCIe Bridge */
+
+		/* Bus 0, Dev A - PCIe Bridge */
+
+		/* Bus 0, Dev B - PCIe Bridge */
+		Package() {0x000BFFFF, 0, 0, 0x36 },
+
+		/* Bus 0, Dev C - PCIe Bridge */
+		Package() {0x000CFFFF, 0, 0, 0x36 },
+
+		/* Bus 0, Dev D - PCIe Bridge For Intel 82576 Giga NIC*/
+		Package() {0x000DFFFF, 0, 0, 0x36 },
+
+		/* SB devices in APIC mode */
+		/* Bus 0, Dev 17 - SATA controller */
+		Package() {0x0011FFFF, 0, 0, 0x16 },
+
+		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+		 * EHCI, dev 18, 19 func 2 */
+		Package( ){0x0012FFFF, 0, 0, 16 },
+		Package() {0x0012FFFF, 1, 0, 17 },
+		Package() {0x0012FFFF, 2, 0, 18 },
+		Package() {0x0012FFFF, 3, 0, 19 },
+
+		Package() {0x0013FFFF, 0, 0, 18 },
+		Package() {0x0013FFFF, 1, 0, 19 },
+		Package() {0x0013FFFF, 2, 0, 16 },
+		Package() {0x0013FFFF, 3, 0, 17 },
+
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+		Package() {0x0014FFFF, 0, 0, 16 },
+		Package() {0x0014FFFF, 1, 0, 17 },
+		Package() {0x0014FFFF, 2, 0, 18 },
+		Package() {0x0014FFFF, 3, 0, 19 },
+	})
+
+	Name(PS2, Package(){
+		/* The external GFX - Hooked to PCIe slot 4 */
+		Package() {0x0000FFFF, 0, INTC, 0 },
+		Package() {0x0000FFFF, 1, INTD, 0 },
+		Package() {0x0000FFFF, 2, INTA, 0 },
+		Package() {0x0000FFFF, 3, INTB, 0 },
+	})
+	Name(APS2, Package(){
+		/* The external GFX - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, 0, 0x18 },
+		Package(){0x0000FFFF, 1, 0, 0x19 },
+		Package(){0x0000FFFF, 2, 0, 0x1A },
+		Package(){0x0000FFFF, 3, 0, 0x1B },
+	})
+
+	Name(PS4, Package(){
+		/* PCIe slot - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, INTA, 0 },
+		Package(){0x0000FFFF, 1, INTB, 0 },
+		Package(){0x0000FFFF, 2, INTC, 0 },
+		Package(){0x0000FFFF, 3, INTD, 0 },
+	})
+	Name(APS4, Package(){
+		/* PCIe slot - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, 0, 0x2C },
+		Package(){0x0000FFFF, 1, 0, 0x2D },
+		Package(){0x0000FFFF, 2, 0, 0x2E },
+		Package(){0x0000FFFF, 3, 0, 0x2F },
+	})
+
+	Name(PSb, Package(){
+		/* PCIe slot - Hooked to PCIe slot 11 */
+		Package(){0x0000FFFF, 0, INTD, 0 },
+		Package(){0x0000FFFF, 1, INTA, 0 },
+		Package(){0x0000FFFF, 2, INTB, 0 },
+		Package(){0x0000FFFF, 3, INTC, 0 },
+	})
+	Name(APSb, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 0x20 },
+		Package(){0x0000FFFF, 1, 0, 0x21 },
+		Package(){0x0000FFFF, 2, 0, 0x22 },
+		Package(){0x0000FFFF, 3, 0, 0x23 },
+	})
+
+	Name(PSc, Package(){
+		/* PCIe slot - Hooked to PCIe slot 12 */
+		Package(){0x0000FFFF, 0, INTA, 0 },
+		Package(){0x0000FFFF, 1, INTB, 0 },
+		Package(){0x0000FFFF, 2, INTC, 0 },
+		Package(){0x0000FFFF, 3, INTD, 0 },
+	})
+	Name(APSc, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 0x24 },
+		Package(){0x0000FFFF, 1, 0, 0x25 },
+		Package(){0x0000FFFF, 2, 0, 0x26 },
+		Package(){0x0000FFFF, 3, 0, 0x27 },
+	})
+
+	Name(PSd, Package(){
+		/* PCIe slot - Hooked to PCIe slot 13 */
+		Package(){0x0000FFFF, 0, INTB, 0 },
+		Package(){0x0000FFFF, 1, INTC, 0 },
+		Package(){0x0000FFFF, 2, INTD, 0 },
+		Package(){0x0000FFFF, 3, INTA, 0 },
+	})
+	Name(APSd, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 0x28 },
+		Package(){0x0000FFFF, 1, 0, 0x29 },
+		Package(){0x0000FFFF, 2, 0, 0x2A },
+		Package(){0x0000FFFF, 3, 0, 0x2B },
+	})
+}
diff --git a/src/mainboard/tyan/s8226/acpi/sata.asl b/src/mainboard/tyan/s8226/acpi/sata.asl
new file mode 100644
index 0000000..bd4acf0
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/sata.asl
@@ -0,0 +1,149 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(SATA) {
+			Name(_ADR, 0x00110000)
+			#include "sata.asl"
+		}
+	}
+}
+*/
+
+Name(STTM, Buffer(20) {
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+	\_GPE._L1F()
+}
+
+Device(PMRY)
+{
+	Name(_ADR, 0)
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(PMST) {
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P0IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return  (0x00) /* sata is missing */
+			}
+		}
+	}/* end of PMST */
+
+	Device(PSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P1IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	}	/* end of PSLA */
+}   /* end of PMRY */
+
+
+Device(SEDY)
+{
+	Name(_ADR, 1)		/* IDE Scondary Channel */
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(SMST)
+	{
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P2IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SMST */
+
+	Device(SSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P3IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SSLA */
+}   /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+	Method(_L1F,0x0,NotSerialized) {
+		if (\_SB.P0PR) {
+			if (LGreater(\_SB.P0IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P0PR)
+		}
+
+		if (\_SB.P1PR) {
+			if (LGreater(\_SB.P1IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P1PR)
+		}
+
+		if (\_SB.P2PR) {
+			if (LGreater(\_SB.P2IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P2PR)
+		}
+
+		if (\_SB.P3PR) {
+			if (LGreater(\_SB.P3IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P3PR)
+		}
+	}
+}
diff --git a/src/mainboard/tyan/s8226/acpi/usb.asl b/src/mainboard/tyan/s8226/acpi/usb.asl
new file mode 100644
index 0000000..81ea9a2
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/usb.asl
@@ -0,0 +1,161 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "usb.asl"
+	}
+*/
+Method(UCOC, 0) {
+	Sleep(20)
+	Store(0x13,CMTI)
+	Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+	Scope (\_GPE) {
+		Method (_L13) {
+			UCOC()
+			if(LEqual(GPB0,PLC0)) {
+				Not(PLC0,PLC0)
+				Store(PLC0, \_SB.PT0D)
+			}
+		}
+	}
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+	Scope (\_GPE) {
+		Method (_L14) {
+			UCOC()
+			if (LEqual(GPB1,PLC1)) {
+				Not(PLC1,PLC1)
+				Store(PLC1, \_SB.PT1D)
+			}
+		}
+	}
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+	Scope (\_GPE) {
+		Method (_L15) {
+			UCOC()
+			if (LEqual(GPB2,PLC2)) {
+				Not(PLC2,PLC2)
+				Store(PLC2, \_SB.PT2D)
+			}
+		}
+	}
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+	Scope (\_GPE) {
+		Method (_L16) {
+			UCOC()
+			if (LEqual(GPB3,PLC3)) {
+				Not(PLC3,PLC3)
+				Store(PLC3, \_SB.PT3D)
+			}
+		}
+	}
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+	Scope (\_GPE) {
+		Method (_L19) {
+			UCOC()
+			if (LEqual(GPB4,PLC4)) {
+				Not(PLC4,PLC4)
+				Store(PLC4, \_SB.PT4D)
+			}
+		}
+	}
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+	Scope (\_GPE) {
+		Method (_L1A) {
+			UCOC()
+			if (LEqual(GPB5,PLC5)) {
+				Not(PLC5,PLC5)
+				Store(PLC5, \_SB.PT5D)
+			}
+		}
+	}
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1C) { */
+		Method (_L06) {
+			UCOC()
+			if (LEqual(GPB6,PLC6)) {
+				Not(PLC6,PLC6)
+				Store(PLC6, \_SB.PT6D)
+			}
+		}
+	}
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1D) { */
+		Method (_L07) {
+			UCOC()
+			if (LEqual(GPB7,PLC7)) {
+				Not(PLC7,PLC7)
+				Store(PLC7, \_SB.PT7D)
+			}
+		}
+	}
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+	Scope (\_GPE) {
+		Method (_L17) {
+			if (LEqual(G8IS,PLC8)) {
+				Not(PLC8,PLC8)
+				Store(PLC8, \_SB.PT8D)
+			}
+		}
+	}
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+	Scope (\_GPE) {
+		Method (_L0E) {
+			if (LEqual(G9IS,0)) {
+			Store(1,\_SB.PT9D)
+			}
+		}
+	}
+}
diff --git a/src/mainboard/tyan/s8226/acpi_tables.c b/src/mainboard/tyan/s8226/acpi_tables.c
new file mode 100644
index 0000000..3e8f014
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi_tables.c
@@ -0,0 +1,319 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <arch/io.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+#include "agesawrapper.h"
+
+#define DUMP_ACPI_TABLES 0
+
+#if DUMP_ACPI_TABLES == 1
+static void dump_mem(u32 start, u32 end)
+{
+
+	u32 i;
+	print_debug("dump_mem:");
+	for (i = start; i < end; i++) {
+		if ((i & 0xf) == 0) {
+			printk(BIOS_DEBUG, "\n%08x:", i);
+		}
+		printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
+	}
+	print_debug("\n");
+}
+#endif
+
+extern const unsigned char AmlCode[];
+
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+	/* Just a dummy */
+	return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+	device_t dev;
+	u32 dword;
+	u32 gsi_base = 0;
+	u32 apicid_sp5100;
+	u32 apicid_sr5650;
+
+	/*
+	 * AGESA v5 Apply apic enumeration rules
+	 * For systems with >= 16 APICs, put the IO-APICs at 0..n and
+	 * put the local-APICs at m..z
+	 * For systems with < 16 APICs, put the Local-APICs at 0..n and
+	 * put the IO-APICs at (n + 1)..z
+	 */
+#if CONFIG_MAX_CPUS >= 16
+	apicid_sp5100 = 0x0;
+#else
+	apicid_sp5100 = CONFIG_MAX_CPUS + 1
+#endif
+		apicid_sr5650 = apicid_sp5100 + 1;
+
+	/* create all subtables for processors */
+	current = acpi_create_madt_lapics(current);
+
+	/* Write sp5100 IOAPIC, only one */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+			apicid_sp5100,
+			IO_APIC_ADDR,
+			0
+			);
+
+	/* IOAPIC on rs5690 */
+	gsi_base += IO_APIC_INTERRUPTS;  /* SP5100 has 24 IOAPIC entries. */
+	dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+	if (dev) {
+		pci_write_config32(dev, 0xF8, 0x1);
+		dword = pci_read_config32(dev, 0xFC) & 0xfffffff0;
+		current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+				apicid_sr5650,
+				dword,
+				gsi_base
+				);
+	}
+
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current,
+			0, //BUS
+			0, //SOURCE
+			2, //gsirq
+			0  //flags
+			);
+
+	/* 0: mean bus 0--->ISA */
+	/* 0: PIC 0 */
+	/* 2: APIC 2 */
+	/* 5 mean: 0101 --> Edige-triggered, Active high */
+
+	/* create all subtables for processors */
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0, 5, 1);
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 1, 5, 1);
+	/* 1: LINT1 connect to NMI */
+
+	return current;
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+	// Not implemented
+	return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+	/* No NUMA, no SRAT */
+	return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id)
+{
+	int lens;
+	msr_t msr;
+	char pscope[] = "\\_SB.PCI0";
+
+	lens = acpigen_write_scope(pscope);
+	msr = rdmsr(TOP_MEM);
+	lens += acpigen_write_name_dword("TOM1", msr.lo);
+	msr = rdmsr(TOP_MEM2);
+	/*
+	 * Since XP only implements parts of ACPI 2.0, we can't use a qword
+	 * here.
+	 * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt
+	 * slide 22ff.
+	 * Shift value right by 20 bit to make it fit into 32bit,
+	 * giving us 1MB granularity and a limit of almost 4Exabyte of memory.
+	 */
+	lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20);
+	acpigen_patch_len(lens - 1);
+	return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+	unsigned long current;
+	acpi_rsdp_t *rsdp;
+	acpi_rsdt_t *rsdt;
+	//acpi_hpet_t *hpet;
+	acpi_madt_t *madt;
+	acpi_srat_t *srat;
+	acpi_slit_t *slit;
+	acpi_fadt_t *fadt;
+	acpi_facs_t *facs;
+	acpi_header_t *dsdt;
+	acpi_header_t *ssdt;
+	acpi_header_t *ssdt2;
+	acpi_header_t *alib;
+
+	get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
+
+	/* Align ACPI tables to 16 bytes */
+	start = (start + 0x0f) & -0x10;
+	current = start;
+
+	printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
+
+	/* We need at least an RSDP and an RSDT Table */
+	rsdp = (acpi_rsdp_t *) current;
+	current += sizeof(acpi_rsdp_t);
+	rsdt = (acpi_rsdt_t *) current;
+	current += sizeof(acpi_rsdt_t);
+
+	/* clear all table memory */
+	memset((void *)start, 0, current - start);
+
+	acpi_write_rsdp(rsdp, rsdt, NULL);
+	acpi_write_rsdt(rsdt);
+
+	/* FACS */
+	printk(BIOS_DEBUG, "ACPI:    * FACS\n");
+	facs = (acpi_facs_t *) current;
+	current += sizeof(acpi_facs_t);
+	acpi_create_facs(facs);
+
+	/* DSDT */
+	printk(BIOS_DEBUG, "ACPI:    * DSDT\n");
+	dsdt = (acpi_header_t *)current;
+	memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
+	current += dsdt->length;
+	memcpy(dsdt, &AmlCode, dsdt->length);
+	printk(BIOS_DEBUG, "ACPI:    * DSDT @ %p Length %x\n", dsdt, dsdt->length);
+	/* FADT */
+	printk(BIOS_DEBUG, "ACPI:    * FADT\n");
+	fadt = (acpi_fadt_t *) current;
+	current += sizeof(acpi_fadt_t);
+
+	acpi_create_fadt(fadt, facs, dsdt);
+	acpi_add_table(rsdp, fadt);
+
+	/*
+	 * We explicitly add these tables later on:
+	 */
+#ifdef UNUSED_CODE // Don't need HPET table. we have one in dsdt
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * HPET at %lx\n", current);
+	hpet = (acpi_hpet_t *) current;
+	current += sizeof(acpi_hpet_t);
+	acpi_create_hpet(hpet);
+	acpi_add_table(rsdp, hpet);
+#endif
+
+	/* If we want to use HPET Timers Linux wants an MADT */
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * MADT at %lx\n",current);
+	madt = (acpi_madt_t *) current;
+	acpi_create_madt(madt);
+	current += madt->header.length;
+	acpi_add_table(rsdp, madt);
+
+	/* SRAT */
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * SRAT at %lx\n", current);
+	srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT);
+	if (srat != NULL) {
+		memcpy((void *)current, srat, srat->header.length);
+		srat = (acpi_srat_t *) current;
+		//acpi_create_srat(srat);
+		current += srat->header.length;
+		acpi_add_table(rsdp, srat);
+	}
+
+	/* SLIT */
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:   * SLIT at %lx\n", current);
+	slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT);
+	if (slit != NULL) {
+		memcpy((void *)current, slit, slit->header.length);
+		slit = (acpi_slit_t *) current;
+		//acpi_create_slit(slit);
+		current += slit->header.length;
+		acpi_add_table(rsdp, slit);
+	}
+
+	/* SSDT */
+	current	 = (current + 0x0f) & -0x10;
+	printk(BIOS_DEBUG, "ACPI:  * AGESA ALIB SSDT at %lx\n", current);
+	alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB);
+	if (alib != NULL) {
+		memcpy((void *)current, alib, alib->length);
+		ssdt = (acpi_header_t *) current;
+		current += alib->length;
+		acpi_add_table(rsdp,alib);
+	} else {
+		printk(BIOS_DEBUG, "	AGESA ALIB SSDT table NULL. Skipping.\n");
+	}
+
+	/* The DSDT needs additional work for the AGESA SSDT Pstate table */
+	current	 = ( current + 0x0f) & -0x10;
+	printk(BIOS_DEBUG, "ACPI:  * AGESA SSDT Pstate at %lx\n", current);
+	ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE);
+	if (ssdt != NULL) {
+		memcpy((void *)current, ssdt, ssdt->length);
+		ssdt = (acpi_header_t *) current;
+		current += ssdt->length;
+		acpi_add_table(rsdp,ssdt);
+	} else {
+		printk(BIOS_DEBUG, "  AGESA SSDT table NULL. Skipping.\n");
+	}
+
+	current	 = ( current + 0x0f) & -0x10;
+	printk(BIOS_DEBUG, "ACPI:  * coreboot TOM SSDT2 at %lx\n", current);
+	ssdt2 = (acpi_header_t *) current;
+	acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR);
+	current += ssdt2->length;
+	acpi_add_table(rsdp,ssdt2);
+
+#if DUMP_ACPI_TABLES == 1
+	printk(BIOS_DEBUG, "rsdp\n");
+	dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+
+	printk(BIOS_DEBUG, "rsdt\n");
+	dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+
+	printk(BIOS_DEBUG, "madt\n");
+	dump_mem(madt, ((void *)madt) + madt->header.length);
+
+	printk(BIOS_DEBUG, "srat\n");
+	dump_mem(srat, ((void *)srat) + srat->header.length);
+
+	printk(BIOS_DEBUG, "slit\n");
+	dump_mem(slit, ((void *)slit) + slit->header.length);
+
+	printk(BIOS_DEBUG, "ssdt\n");
+	dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+
+	printk(BIOS_DEBUG, "fadt\n");
+	dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+#endif
+
+	printk(BIOS_INFO, "ACPI: done.\n");
+	return current;
+}
diff --git a/src/mainboard/tyan/s8226/agesawrapper.c b/src/mainboard/tyan/s8226/agesawrapper.c
new file mode 100644
index 0000000..1485354
--- /dev/null
+++ b/src/mainboard/tyan/s8226/agesawrapper.c
@@ -0,0 +1,1204 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include "agesawrapper.h"
+#include "BiosCallOuts.h"
+#include "cpuRegisters.h"
+#include "cpuCacheInit.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "Dispatcher.h"
+#include "cpuCacheInit.h"
+#include "amdlib.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include <cpuFamilyTranslation.h> /* CPU_SPECIFIC_SERVICES */
+
+#define FILECODE UNASSIGNED_FILE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* ACPI table pointers returned by AmdInitLate */
+VOID *DmiTable    = NULL;
+VOID *AcpiPstate  = NULL;
+VOID *AcpiSrat    = NULL;
+VOID *AcpiSlit    = NULL;
+
+VOID *AcpiWheaMce = NULL;
+VOID *AcpiWheaCmc = NULL;
+VOID *AcpiAlib    = NULL;
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+extern VOID OemCustomizeInitEarly(IN  OUT AMD_EARLY_PARAMS *InitEarly);
+
+static UINT32 agesawrapper_amdinitcpuio(VOID)
+{
+	AGESA_STATUS		Status;
+	UINT32			PciData;
+	PCI_ADDR		PciAddress;
+	AMD_CONFIG_PARAMS	StdHeader;
+	UINT32			nodes;
+	UINT32			node;
+	UINT32			sblink;
+	UINT32			i;
+	UINT32			TOM;
+
+	/* get the number of coherent nodes in the system */
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x60);
+	LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	nodes = ((PciData >> 4) & 7) + 1; //NodeCnt[2:0]
+
+	/* Find out the Link ID of Node0 that connects to the
+	 * Southbridge (system IO hub). e.g. family10 MCM Processor,
+	 * sbLink is Processor0 Link2, internal Node0 Link3
+	 */
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x64);
+	LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	sblink = (PciData >> 8) & 3; //assume ganged
+
+	/* Enable MMIO on AMD CPU Address Map Controller for all nodes */
+	for (node = 0; node < nodes; node++) {
+		/* clear all MMIO Mapped Base/Limit Registers */
+		for (i = 0; i < 8; i++) {
+			PciData = 0x00000000;
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x80 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x84 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		}
+
+		/* clear all IO Space Base/Limit Registers */
+		for (i = 0; i < 4; i++) {
+			PciData = 0x00000000;
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC4 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC0 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		}
+
+		/* Set VGA Ram MMIO 0000A0000-0000BFFFF to Node0 sbLink */
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x84);
+		PciData = 0x00000B00;
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x80);
+		PciData = 0x00000A03;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+		/* Set TOM1-FFFFFFFF to Node0 sbLink. */
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x8C);
+		PciData = 0x00FFFF00;
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		TOM = (UINT32)MsrRead(TOP_MEM);
+		PciData = (TOM >> 8) | 0x03;
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x88);
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+		/* Set MMCONF space to Node0 sbLink with NP set.
+		 * default E0000000-EFFFFFFF
+		 * Just have all mmio set to non-posted,
+		 * coreboot not implemente the range by range setting yet.
+		 */
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xBC);
+		PciData = CONFIG_MMCONF_BASE_ADDRESS + (CONFIG_MMCONF_BUS_NUMBER * 0x100000);//1MB each bus
+		PciData = (PciData >> 8) & 0xFFFFFF00;
+		PciData |= 0x80; //NP
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xB8);
+		PciData = (PCIE_BASE_ADDRESS >> 8) | 0x03;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+
+		/* Set PCIO: 0x0 - 0xFFF000 to Node0 sbLink  and enabled VGA IO*/
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC4);
+		PciData = 0x00FFF000;
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC0);
+		PciData = 0x00000033;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	}
+
+	Status = AGESA_SUCCESS;
+	return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdinitmmio (
+	VOID
+	)
+{
+	AGESA_STATUS                  Status;
+	UINT64                        MsrReg;
+	UINT32                        PciData;
+	PCI_ADDR                      PciAddress;
+	AMD_CONFIG_PARAMS             StdHeader;
+
+	/*
+	  Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
+	  Address MSR register.
+	*/
+	MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
+	LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader);
+
+	/*
+	  Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
+	*/
+	LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader);
+	MsrReg = MsrReg | 0x0000400000000000;
+	LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
+
+	/* For serial port */
+	PciData = 0xFF03FFD5;
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44);
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* Set ROM cache onto WP to decrease post time */
+	MsrReg = (0x0100000000ull - CONFIG_ROM_SIZE) | 5ull;
+	LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader);
+	MsrReg = (0x1000000000000ull - CONFIG_ROM_SIZE) | 0x800ull;
+	LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader);
+
+	Status = AGESA_SUCCESS;
+	return (UINT32)Status;
+}
+
+UINT32 agesawrapper_amdinitreset(VOID)
+{
+	AGESA_STATUS status = AGESA_SUCCESS;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_RESET_PARAMS AmdResetParams;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	LibAmdMemFill(&AmdResetParams,
+			0,
+			sizeof(AMD_RESET_PARAMS),
+			&(AmdResetParams.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
+	AmdParamStruct.AllocationMethod = ByHost;
+	AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS);
+	AmdParamStruct.NewStructPtr = &AmdResetParams;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = NULL;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	AmdResetParams.HtConfig.Depth = 0;
+
+	//MARG34PI disabled AGESA_ENTRY_INIT_RESET by default
+	//but we need to call AmdCreateStruct to call HeapManagerInit, or the event log not work
+#if (defined AGESA_ENTRY_INIT_RESET) && (AGESA_ENTRY_INIT_RESET == TRUE)
+	status = AmdInitReset((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr);
+#endif
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct(&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitearly(VOID)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_EARLY_PARAMS     *AmdEarlyParamsPtr;
+	UINT32 TscRateInMhz;
+	CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+
+	AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr;
+	OemCustomizeInitEarly(AmdEarlyParamsPtr);
+
+	status = AmdInitEarly(AmdEarlyParamsPtr);
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+
+	GetCpuServicesOfCurrentCore((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &AmdParamStruct.StdHeader);
+	FamilySpecificServices->GetTscRate(FamilySpecificServices, &TscRateInMhz, &AmdParamStruct.StdHeader);
+	printk(BIOS_DEBUG, "BSP Frequency: %luMHz\n", TscRateInMhz);
+
+	AmdReleaseStruct(&AmdParamStruct);
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitpost(VOID)
+{
+	AGESA_STATUS status;
+	UINT16 i;
+	UINT32 *HeadPtr;
+	AMD_INTERFACE_PARAMS  AmdParamStruct;
+	AMD_POST_PARAMS *PostParams;
+	BIOS_HEAP_MANAGER    *BiosManagerPtr;
+	UINT32 TscRateInMhz;
+	CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr;
+	status = AmdInitPost(PostParams);
+	if (status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus);
+	}
+	AmdReleaseStruct(&AmdParamStruct);
+
+	/* Initialize heap space */
+	BiosManagerPtr = (BIOS_HEAP_MANAGER *)BIOS_HEAP_START_ADDRESS;
+
+	HeadPtr = (UINT32 *) ((UINT8 *) BiosManagerPtr + sizeof(BIOS_HEAP_MANAGER));
+	for (i = 0; i < ((BIOS_HEAP_SIZE/4) - (sizeof(BIOS_HEAP_MANAGER)/4)); i++) {
+		*HeadPtr = 0x00000000;
+		HeadPtr++;
+	}
+	BiosManagerPtr->StartOfAllocatedNodes = 0;
+	BiosManagerPtr->StartOfFreedNodes = 0;
+
+	GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &AmdParamStruct.StdHeader);
+	FamilySpecificServices->GetTscRate (FamilySpecificServices, &TscRateInMhz, &AmdParamStruct.StdHeader);
+	printk(BIOS_DEBUG, "BSP Frequency: %luMHz\n", TscRateInMhz);
+
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitenv(VOID)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_ENV_PARAMS *EnvParams;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	EnvParams = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr;
+	status = AmdInitEnv(EnvParams);
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(EnvParams->StdHeader.HeapStatus);
+
+	AmdReleaseStruct(&AmdParamStruct);
+	return (UINT32)status;
+}
+
+VOID * agesawrapper_getlateinitptr(int pick)
+{
+	switch (pick) {
+		case PICK_DMI:
+			return DmiTable;
+
+		case PICK_PSTATE:
+			return AcpiPstate;
+
+		case PICK_SRAT:
+			return AcpiSrat;
+
+		case PICK_SLIT:
+			return AcpiSlit;
+		case PICK_WHEA_MCE:
+			return AcpiWheaMce;
+		case PICK_WHEA_CMC:
+			return AcpiWheaCmc;
+		case PICK_ALIB:
+			return AcpiAlib;
+		default:
+			return NULL;
+	}
+
+	return NULL;
+}
+
+UINT32 agesawrapper_amdinitmid(VOID)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+
+	/* Enable MMIO on AMD CPU Address Map Controller */
+	agesawrapper_amdinitcpuio();
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	status = AmdInitMid((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr);
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct(&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitlate(VOID)
+{
+	AGESA_STATUS		Status;
+	AMD_INTERFACE_PARAMS	AmdParamStruct;
+	AMD_LATE_PARAMS		*AmdLateParamsPtr;
+
+	LibAmdMemFill(&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	AmdCreateStruct (&AmdParamStruct);
+	AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr;
+
+	printk(BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr);
+
+	Status = AmdInitLate(AmdLateParamsPtr);
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdLateParamsPtr->StdHeader.HeapStatus);
+		ASSERT(Status == AGESA_SUCCESS);
+	}
+	DmiTable    = AmdLateParamsPtr->DmiTable;
+	AcpiPstate  = AmdLateParamsPtr->AcpiPState;
+	AcpiSrat    = AmdLateParamsPtr->AcpiSrat;
+	AcpiSlit    = AmdLateParamsPtr->AcpiSlit;
+	AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce;
+	AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc;
+	AcpiAlib    = AmdLateParamsPtr->AcpiAlib;
+
+	printk(BIOS_DEBUG, "In %s, AGESA generated ACPI tables:\n"
+		"   DmiTable:%p\n   AcpiPstate: %p\n   AcpiSrat:%p\n   AcpiSlit:%p\n"
+		"   Mce:%p\n   Cmc:%p\n   Alib:%p\n",
+		 __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit,
+		 AcpiWheaMce, AcpiWheaCmc, AcpiAlib);
+
+	/* Don't release the structure until coreboot has copied the ACPI tables.
+	 * AmdReleaseStruct (&AmdLateParams);
+	 */
+
+	return (UINT32)Status;
+}
+
+/**
+ * @param[in] UINTN ApicIdOfCore,
+ * @param[in] AP_EXE_PARAMS *LaunchApParams
+ */
+UINT32 agesawrapper_amdlaterunaptask(UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS Status;
+	AMD_LATE_PARAMS AmdLateParams;
+
+	LibAmdMemFill(&AmdLateParams,
+			0,
+			sizeof(AMD_LATE_PARAMS),
+			&(AmdLateParams.StdHeader));
+
+	AmdLateParams.StdHeader.AltImageBasePtr = 0;
+	AmdLateParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdLateParams.StdHeader.Func = 0;
+	AmdLateParams.StdHeader.ImageBasePtr = 0;
+	AmdLateParams.StdHeader.HeapStatus = HEAP_TEMP_MEM;
+
+	printk(BIOS_DEBUG, "AmdLateRunApTask on Core: %x\n", (uint32_t)Data);
+	Status = AmdLateRunApTask((AP_EXE_PARAMS *)ConfigPtr);
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdLateParams.StdHeader.HeapStatus);
+		ASSERT(Status <= AGESA_UNSUPPORTED);
+	}
+
+	return (UINT32)Status;
+}
+
+/**
+ *
+ */
+static void agesa_bound_check(EVENT_PARAMS *event)
+{
+	switch (event->EventInfo) {
+		case CPU_ERROR_HEAP_IS_FULL:
+			printk(BIOS_DEBUG, "Heap allocation for specified buffer handle failed as heap is full\n");
+			break;
+
+		case CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED:
+			printk(BIOS_DEBUG, "Allocation incomplete as buffer has previously been allocated\n");
+			break;
+
+		case CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT:
+			printk(BIOS_DEBUG, "Unable to locate buffer handle or deallocate heap as buffer handle cannot be located\n");
+			break;
+
+		case CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT:
+			printk(BIOS_DEBUG, "Unable to locate pointer to the heap buffer\n");
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_alert(EVENT_PARAMS *event)
+{
+	switch (event->EventInfo) {
+		case MEM_ALERT_USER_TMG_MODE_OVERRULED:
+			printk(BIOS_DEBUG, "Socket %lx Dct %lx Channel %lx "
+					"TIMING_MODE_SPECIFIC is requested but can not be applied to current configurations.\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case MEM_ALERT_ORG_MISMATCH_DIMM:
+			printk(BIOS_DEBUG, "Socket %lx Dct %lx Channel %lx "
+					"DIMM organization miss-match\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case MEM_ALERT_BK_INT_DIS:
+			printk(BIOS_DEBUG, "Socket %lx Dct %lx Channel %lx "
+					"Bank interleaving disable for internal issue\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case CPU_EVENT_BIST_ERROR:
+			printk(BIOS_DEBUG, "BIST error: %lx reported on Socket %lx Core %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_HW_SYNCFLOOD:
+			printk(BIOS_DEBUG, "HT_EVENT_DATA_HW_SYNCFLOOD error on Socket %lx Link %lx\n",
+					event->DataParam1,
+					event->DataParam2);
+			break;
+
+		case HT_EVENT_HW_HTCRC:
+			printk(BIOS_DEBUG, "HT_EVENT_HW_HTCRC error on Socket %lx Link %lx Lanemask:%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_warning(EVENT_PARAMS *event)
+{
+/*
+	if (event->EventInfo == CPU_EVENT_STACK_REENTRY) {
+		printk(BIOS_DEBUG,
+				"The stack has already been enabled and this is a
+				redundant invocation of AMD_ENABLE_STACK. There is no event logged and
+				no data values. The event sub-class is returned along with the status code\n");
+		return;
+	}
+*/
+
+	switch (event->EventInfo >> 24) {
+		case 0x04:
+			printk(BIOS_DEBUG, "Memory: Socket %lx Dct %lx Channel%lx ",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case 0x08:
+			printk(BIOS_DEBUG, "Processor: ");
+			break;
+
+		case 0x10:
+			printk(BIOS_DEBUG, "Hyper Transport: ");
+			break;
+
+		default:
+			break;
+	}
+
+	switch (event->EventInfo) {
+		case MEM_WARNING_UNSUPPORTED_QRDIMM:
+			printk(BIOS_DEBUG, "QR DIMMs detected but not supported\n");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_UDIMM:
+			printk(BIOS_DEBUG, "Unbuffered DIMMs detected but not supported\n");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_SODIMM:
+			printk(BIOS_DEBUG, "SO-DIMMs detected but not supported");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_X4DIMM:
+			printk(BIOS_DEBUG, "x4 DIMMs detected but not supported");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_RDIMM:
+			printk(BIOS_DEBUG, "Registered DIMMs detected but not supported");
+			break;
+
+/*
+		case MEM_WARNING_UNSUPPORTED_LRDIMM:
+			printk(BIOS_DEBUG, "Load Reduced DIMMs detected but not supported");
+			break;
+*/
+
+		case MEM_WARNING_NO_SPDTRC_FOUND:
+			printk(BIOS_DEBUG, "NO_SPDTRC_FOUND");
+			break;
+
+		case MEM_WARNING_EMP_NOT_SUPPORTED:
+			printk(BIOS_DEBUG, "Processor is not capable for EMP");//
+			break;
+
+		case MEM_WARNING_EMP_CONFLICT:
+			printk(BIOS_DEBUG, "EMP cannot be enabled if channel interleaving bank interleaving, or bank swizzle is enabled\n");//
+			break;
+
+		case MEM_WARNING_EMP_NOT_ENABLED:
+			printk(BIOS_DEBUG, "Memory size is not power of two\n");//
+			break;
+
+		case MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED:
+			printk(BIOS_DEBUG, "MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED\n");
+			break;
+
+		case MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED\n");
+			break;
+
+		case MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED\n");
+			break;
+
+		case MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED\n");
+			break;
+
+		case MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED:
+			printk(BIOS_DEBUG, "MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED\n");
+			break;
+
+/*
+		case MEM_WARNING_INITIAL_DDR3VOLT_NONZERO:
+			printk(BIOS_DEBUG, "MEM_WARNING_INITIAL_DDR3VOLT_NONZERO\n");
+			break;
+
+		case MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO:
+			printk(BIOS_DEBUG, "MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO\n");
+			break;
+*/
+
+		case CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR:
+			printk(BIOS_DEBUG, "Allocation rule number that has been violated:");
+			if ((event->EventInfo & 0x000000FF) == 0x01) {
+				printk(BIOS_DEBUG, "AGESA_CACHE_SIZE_REDUCED\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x02) {
+				printk(BIOS_DEBUG, "AGESA_CACHE_REGIONS_ACROSS_1MB\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x03) {
+				printk(BIOS_DEBUG, "AGESA_CACHE_REGIONS_ACROSS_4GB\n");
+			}
+			printk(BIOS_DEBUG, "cache region index:%lx, start:%lx size:%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case CPU_WARNING_ADJUSTED_LEVELING_MODE:
+			printk(BIOS_DEBUG, "CPU_WARNING_ADJUSTED_LEVELING_MODE "
+					"requested: %lx, actual level:%lx\n",
+					event->DataParam1,
+					event->DataParam2);
+			break;
+
+		case CPU_EVENT_PM_PSTATE_OVERCURRENT:
+			printk(BIOS_DEBUG, "CPU_EVENT_PM_PSTATE_OVERCURRENT "
+						"Socket: %lx, Pstate:%lx\n",
+						event->DataParam1,
+						event->DataParam2);
+			break;
+
+		case CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG:
+			printk(BIOS_DEBUG, "CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG\n");
+			break;
+
+/*
+		case CPU_EVENT_UNKNOWN_PROCESSOR_REVISION:
+			printk(BIOS_DEBUG, "CPU_EVENT_UNKNOWN_PROCESSOR_REVISION, socket: %lx, cpuid:%lx\n",
+				event->DataParam1,
+				event->DataParam2);
+			break;
+*/
+
+		case HT_EVENT_OPT_REQUIRED_CAP_RETRY:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_REQUIRED_CAP_RETRY, Socket %lx Link %lx Depth %lx\n",
+				event->DataParam1,
+				event->DataParam2,
+				event->DataParam3);
+			break;
+
+		case HT_EVENT_OPT_REQUIRED_CAP_GEN3:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_REQUIRED_CAP_GEN3, Socket %lx Link %lx Depth %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_OPT_UNUSED_LINKS:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_UNUSED_LINKS, SocketA%lx LinkA%lx SocketB%lx LinkB%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+			break;
+
+		case HT_EVENT_OPT_LINK_PAIR_EXCEED:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_LINK_PAIR_EXCEED, SocketA%lx MasterLink%lx SocketB%lx AltLink%lx\n",
+
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_error(EVENT_PARAMS *event)
+{
+
+	switch (event->EventInfo >> 24) {
+		case 0x04:
+			printk(BIOS_DEBUG, "Memory: Socket %lx Dct %lx Channel%lx ",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case 0x08:
+			printk(BIOS_DEBUG, "Processor: ");
+			break;
+
+		case 0x10:
+			printk(BIOS_DEBUG, "Hyper Transport: ");
+			break;
+
+		default:
+			break;
+	}
+
+	switch (event->EventInfo) {
+		case MEM_ERROR_NO_DQS_POS_RD_WINDOW:
+			printk(BIOS_DEBUG, "No DQS Position window for RD DQS\n");
+			break;
+
+		case MEM_ERROR_SMALL_DQS_POS_RD_WINDOW:
+			printk(BIOS_DEBUG, "Small DQS Position window for RD DQS\n");
+			break;
+
+		case MEM_ERROR_NO_DQS_POS_WR_WINDOW:
+			printk(BIOS_DEBUG, "No DQS Position window for WR DQS\n");
+			break;
+
+		case MEM_ERROR_SMALL_DQS_POS_WR_WINDOW:
+			printk(BIOS_DEBUG, "Small DQS Position window for WR DQS\n");
+			break;
+
+		case MEM_ERROR_DIMM_SPARING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "DIMM sparing has not been enabled for an internal issues\n");
+			break;
+
+		case MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE:
+			printk(BIOS_DEBUG, "Receive Enable value is too large\n");
+			break;
+		case MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW:
+			printk(BIOS_DEBUG, "There is no DQS receiver enable window\n");
+			break;
+
+		case MEM_ERROR_DRAM_ENABLED_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling DramEnabled bit\n");
+			break;
+
+		case MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling DctAccessDone bit\n");
+			break;
+
+		case MEM_ERROR_SEND_CTRL_WORD_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling SendCtrlWord bit\n");
+			break;
+
+		case MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling PrefDramTrainMode bit\n");
+			break;
+
+		case MEM_ERROR_ENTER_SELF_REF_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling EnterSelfRef bit\n");
+			break;
+
+		case MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling FreqChgInProg bit\n");
+			break;
+
+		case MEM_ERROR_EXIT_SELF_REF_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling ExitSelfRef bit\n");
+			break;
+
+		case MEM_ERROR_SEND_MRS_CMD_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling SendMrsCmd bit\n");
+			break;
+
+		case MEM_ERROR_SEND_ZQ_CMD_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling SendZQCmd bit\n");
+			break;
+
+		case MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling DctExtraAccessDone bit\n");
+			break;
+
+		case MEM_ERROR_MEM_CLR_BUSY_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling MemClrBusy bit\n");
+			break;
+
+		case MEM_ERROR_MEM_CLEARED_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling MemCleared bit\n");
+			break;
+
+		case MEM_ERROR_FLUSH_WR_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling FlushWr bit\n");
+			break;
+
+		case MEM_ERROR_MAX_LAT_NO_WINDOW:
+			printk(BIOS_DEBUG, "Fail to find pass during Max Rd Latency training\n");
+			break;
+
+		case MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL:
+			printk(BIOS_DEBUG, "Fail to launch training code on an AP\n");
+			break;
+
+		case MEM_ERROR_PARALLEL_TRAINING_TIME_OUT:
+			printk(BIOS_DEBUG, "Fail to finish parallel training\n");
+			break;
+
+		case MEM_ERROR_NO_ADDRESS_MAPPING:
+			printk(BIOS_DEBUG, "No address mapping found for a dimm\n");
+			break;
+
+		case MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT:
+			printk(BIOS_DEBUG, "There is no DQS receiver enable window and the value is equal to the largest value\n");
+			break;
+
+		case MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE:
+			printk(BIOS_DEBUG, "Receive Enable value is too large and is 1 less than limit\n");
+			break;
+
+		case MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR:
+			printk(BIOS_DEBUG, "SPD Checksum error for NV_SPDCHK_RESTRT\n");
+			break;
+
+		case MEM_ERROR_NO_CHIPSELECT:
+			printk(BIOS_DEBUG, "No chipselects found\n");
+			break;
+
+		case MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM:
+			printk(BIOS_DEBUG, "Unbuffered dimm is not supported at 333MHz\n");
+			break;
+
+		case MEM_ERROR_WL_PRE_OUT_OF_RANGE:
+			printk(BIOS_DEBUG, "Returned PRE value during write levelizzation was out of range\n");
+			break;
+
+		case CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE:
+			printk(BIOS_DEBUG, "No heap is allocated for BrandId structure\n");
+			break;
+
+		case CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED:
+			printk(BIOS_DEBUG, "Unable to load micro code patch\n");
+			break;
+
+		case CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE:
+			printk(BIOS_DEBUG, "No heap is allocated for the Pstate structure\n");
+			break;
+
+/*
+		case CPU_ERROR_PM_NB_PSTATE_MISMATCH:
+			printk(BIOS_DEBUG, "NB P-state indicated by Index was disabled due to mismatch between processors\n");
+			break;
+*/
+
+		case CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR:
+			printk(BIOS_DEBUG, "Allocation rule number that has been violated:");
+			if ((event->EventInfo & 0x000000FF) == 0x04) {
+				printk(BIOS_DEBUG, "AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x05) {
+				printk(BIOS_DEBUG, "AGESA_START_ADDRESS_LESS_D0000\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x06) {
+				printk(BIOS_DEBUG, "AGESA_THREE_CACHE_REGIONS_ABOVE_1MB\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x07) {
+				printk(BIOS_DEBUG, "AGESA_DEALLOCATE_CACHE_REGIONS\n");
+			}
+			printk(BIOS_DEBUG, "cache region index:%lx, start:%lx size:%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_COH_NO_TOPOLOGY:
+			printk(BIOS_DEBUG, "no Matching Topology was found during coherent initializatio TotalHtNodes: %lx\n",
+					event->DataParam1);
+			break;
+
+		case HT_EVENT_NCOH_BUID_EXCEED:
+			printk(BIOS_DEBUG, "there is a limit of 32 unit IDs per chain Socket%lx Link%lx Depth%lx"
+					"Current BUID: %lx, Unit Count: %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4 >> 16,
+					event->DataParam4 & 0x0000FFFF);
+			break;
+
+		 case HT_EVENT_NCOH_BUS_MAX_EXCEED:
+			printk(BIOS_DEBUG, "maximum auto bus limit exceeded, Socket %lx Link %lx Bus %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_NCOH_CFG_MAP_EXCEED:
+			printk(BIOS_DEBUG, "there is a limit of four non-coherent chains, Socket %lx Link %lx\n",
+					event->DataParam1,
+					event->DataParam2);
+			break;
+
+		case HT_EVENT_NCOH_DEVICE_FAILED:
+			printk(BIOS_DEBUG, "after assigning an IO Device an ID, it does not respond at the new ID"
+					"Socket %lx Link %lx Depth %lx DeviceID %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+		default:
+			break;
+	}
+}
+/**
+ *
+ */
+static void agesa_critical(EVENT_PARAMS *event)
+{
+	switch (event->EventInfo) {
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3:
+			printk(BIOS_DEBUG, "Socket: %lx, Heap allocation error for DMI table for DDR3\n",
+					event->DataParam1);
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2:
+			printk(BIOS_DEBUG, "Socket: %lx, Heap allocation error for DMI table for DDR2\n",
+					event->DataParam1);
+			break;
+
+		case MEM_ERROR_UNSUPPORTED_DIMM_CONFIG:
+			printk(BIOS_DEBUG, "Socket: %lx, Dimm population is not supported\n",
+					event->DataParam1);
+			break;
+
+		case HT_EVENT_COH_PROCESSOR_TYPE_MIX:
+			printk(BIOS_DEBUG, "Socket %lx Link %lx TotalSockets %lx, HT_EVENT_COH_PROCESSOR_TYPE_MIX \n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_COH_MPCAP_MISMATCH:
+			printk(BIOS_DEBUG, "Socket %lx Link %lx MpCap %lx TotalSockets %lx, HT_EVENT_COH_MPCAP_MISMATCH\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_fatal(EVENT_PARAMS *event)
+{
+
+	switch (event->EventInfo >> 24) {
+		case 0x04:
+			printk(BIOS_DEBUG, "Memory: Socket %lx Dct %lx Channel%lx ",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case 0x08:
+			printk(BIOS_DEBUG, "Processor: ");
+			break;
+
+		case 0x10:
+			printk(BIOS_DEBUG, "Hyper Transport: ");
+			break;
+
+		default:
+			break;
+	}
+
+	switch (event->EventInfo) {
+		case MEM_ERROR_MINIMUM_MODE:
+			printk(BIOS_DEBUG, "Running in minimum mode\n");
+			break;
+
+		case MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM:
+			printk(BIOS_DEBUG, "DIMM modules are missmatched\n");
+			break;
+
+		case MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM:
+			printk(BIOS_DEBUG, "No DIMMs have been foun\n");
+			break;
+
+		case MEM_ERROR_MISMATCH_DIMM_CLOCKS:
+			printk(BIOS_DEBUG, "DIMM clocks miss-matched\n");
+			break;
+
+		case MEM_ERROR_NO_CYC_TIME:
+			printk(BIOS_DEBUG, "No cycle time found\n");
+			break;
+		case MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS:
+			printk(BIOS_DEBUG, "Heap allocation error with dynamic storing of trained timings\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs:
+			printk(BIOS_DEBUG, "Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV:
+			printk(BIOS_DEBUG, "Heap allocation error with REMOTE_TRAINING_ENV\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_SPD:
+			printk(BIOS_DEBUG, "Heap allocation error for SPD data\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA:
+			printk(BIOS_DEBUG, "Heap allocation error for RECEIVED_DATA during parallel training\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS:
+			printk(BIOS_DEBUG, "Heap allocation error for S3 \"SPECIAL_CASE_REGISTER\"\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA:
+			printk(BIOS_DEBUG, "Heap allocation error for Training Data\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK:
+			printk(BIOS_DEBUG, "Heap allocation error for  DIMM Identify \"MEM_NB_BLOCK\"\n");
+			break;
+
+		case MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM:
+			printk(BIOS_DEBUG, "No Constructor for DIMM Identify\n");
+			break;
+
+		case MEM_ERROR_VDDIO_UNSUPPORTED:
+			printk(BIOS_DEBUG, "VDDIO of the dimms on the board is not supported\n");
+			break;
+
+		case CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT:
+			printk(BIOS_DEBUG, "Socket: %lx, All PStates exceeded the motherboard current limit on specified socket\n",
+				event->DataParam1);
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ * Interprte the agesa event log to an user readable string
+ */
+static void interpret_agesa_eventlog(EVENT_PARAMS *event)
+{
+	switch (event->EventClass) {
+		case AGESA_BOUNDS_CHK:
+			agesa_bound_check(event);
+			break;
+
+		case AGESA_ALERT:
+			agesa_alert(event);
+			break;
+
+		case AGESA_WARNING:
+			agesa_warning(event);
+			break;
+
+		case AGESA_ERROR:
+			agesa_error(event);
+			break;
+
+		case AGESA_CRITICAL:
+			agesa_critical(event);
+			break;
+
+		case AGESA_FATAL:
+			agesa_fatal(event);
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ * @param  HeapStatus -the current HeapStatus
+ */
+UINT32 agesawrapper_amdreadeventlog(UINT8 HeapStatus)
+{
+	printk(BIOS_DEBUG, "enter in %s\n", __func__);
+	AGESA_STATUS Status;
+	EVENT_PARAMS AmdEventParams;
+
+	LibAmdMemFill(&AmdEventParams,
+			0,
+			sizeof(EVENT_PARAMS),
+			&(AmdEventParams.StdHeader));
+
+	AmdEventParams.StdHeader.AltImageBasePtr = 0;
+	AmdEventParams.StdHeader.CalloutPtr = NULL;
+	AmdEventParams.StdHeader.Func = 0;
+	AmdEventParams.StdHeader.ImageBasePtr = 0;
+	/* I have to know the current HeapStatus to Locate the EventLogHeapPointer */
+	AmdEventParams.StdHeader.HeapStatus = HeapStatus;
+	Status = AmdReadEventLog(&AmdEventParams);
+	while (AmdEventParams.EventClass != 0) {
+		printk(BIOS_DEBUG,"\nEventLog:  EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo);
+		printk(BIOS_DEBUG,"  Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2);
+		printk(BIOS_DEBUG,"  Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4);
+		interpret_agesa_eventlog(&AmdEventParams);
+		Status = AmdReadEventLog(&AmdEventParams);
+	}
+
+	printk(BIOS_DEBUG, "exit %s \n", __func__);
+	return (UINT32)Status;
+}
+
diff --git a/src/mainboard/tyan/s8226/agesawrapper.h b/src/mainboard/tyan/s8226/agesawrapper.h
new file mode 100644
index 0000000..43c7d10
--- /dev/null
+++ b/src/mainboard/tyan/s8226/agesawrapper.h
@@ -0,0 +1,87 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#ifndef _AGESAWRAPPER_H_
+#define _AGESAWRAPPER_H_
+
+#include <stdint.h>
+#include "Porting.h"
+#include "AGESA.h"
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define PCIE_BASE_ADDRESS   CONFIG_MMCONF_BASE_ADDRESS
+
+enum {
+	PICK_DMI,       /* DMI Interface */
+	PICK_PSTATE,    /* Acpi Pstate SSDT Table */
+	PICK_SRAT,      /* SRAT Table */
+	PICK_SLIT,      /* SLIT Table */
+	PICK_WHEA_MCE,  /* WHEA MCE table */
+	PICK_WHEA_CMC,  /* WHEA CMV table */
+	PICK_ALIB,      /* SACPI SSDT table with ALIB implementation */
+};
+
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef struct {
+	UINT32 CalloutName;
+	AGESA_STATUS (*CalloutPtr)(UINT32 Func, UINT32 Data, VOID* ConfigPtr);
+} BIOS_CALLOUT_STRUCT;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+UINT32 agesawrapper_amdinitreset (void);
+UINT32 agesawrapper_amdinitearly (void);
+UINT32 agesawrapper_amdinitenv (void);
+UINT32 agesawrapper_amdinitlate (void);
+UINT32 agesawrapper_amdinitpost (void);
+UINT32 agesawrapper_amdinitmid (void);
+UINT32 agesawrapper_amdreadeventlog (UINT8 HeapStatus);
+UINT32 agesawrapper_amdinitmmio (void);
+void *agesawrapper_getlateinitptr (int pick);
+UINT32 agesawrapper_amdlaterunaptask(UINT32 Data, VOID *ConfigPtr);
+
+#endif
diff --git a/src/mainboard/tyan/s8226/buildOpts.c b/src/mainboard/tyan/s8226/buildOpts.c
new file mode 100644
index 0000000..0f618ec
--- /dev/null
+++ b/src/mainboard/tyan/s8226/buildOpts.c
@@ -0,0 +1,616 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "CommonReturns.h"
+#include "AdvancedApi.h"
+#include <PlatformMemoryConfiguration.h>
+#include "Filecode.h"
+#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
+
+/* AGESA will check the OEM configuration during preprocessing stage,
+ * coreboot enable -Wundef option, so we should make sure we have all contanstand defined
+ */
+/* MEMORY_BUS_SPEED */
+#define  DDR400_FREQUENCY		200	///< DDR 400
+#define  DDR533_FREQUENCY		266	///< DDR 533
+#define  DDR667_FREQUENCY		333	///< DDR 667
+#define  DDR800_FREQUENCY		400	///< DDR 800
+#define  DDR1066_FREQUENCY		533	///< DDR 1066
+#define  DDR1333_FREQUENCY		667	///< DDR 1333
+#define  DDR1600_FREQUENCY		800	///< DDR 1600
+#define  DDR1866_FREQUENCY		933	///< DDR 1866
+#define  UNSUPPORTED_DDR_FREQUENCY	934	///< Highest limit of DDR frequency
+
+/* QUANDRANK_TYPE*/
+#define QUADRANK_REGISTERED		0	///< Quadrank registered DIMM
+#define QUADRANK_UNBUFFERED		1	///< Quadrank unbuffered DIMM
+
+/* USER_MEMORY_TIMING_MODE */
+#define TIMING_MODE_AUTO		0	///< Use best rate possible
+#define TIMING_MODE_LIMITED		1	///< Set user top limit
+#define TIMING_MODE_SPECIFIC		2	///< Set user specified speed
+
+/* POWER_DOWN_MODE */
+#define POWER_DOWN_BY_CHANNEL		0	///< Channel power down mode
+#define POWER_DOWN_BY_CHIP_SELECT	1	///< Chip select power down mode
+
+/* User makes option selections here
+ * Comment out the items wanted to be included in the build.
+ * Uncomment those items you with to REMOVE from the build.
+ */
+//#define BLDOPT_REMOVE_UDIMMS_SUPPORT           TRUE
+//#define BLDOPT_REMOVE_RDIMMS_SUPPORT           TRUE
+//#define BLDOPT_REMOVE_ECC_SUPPORT              TRUE
+//#define BLDOPT_REMOVE_BANK_INTERLEAVE          TRUE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE           TRUE
+//#define BLDOPT_REMOVE_NODE_INTERLEAVE          TRUE
+//#define BLDOPT_REMOVE_PARALLEL_TRAINING        TRUE
+//#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT     TRUE
+#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT      TRUE
+//#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT      TRUE
+////#define BLDOPT_REMOVE_ACPI_PSTATES             TRUE
+////#define BLDOPT_REMOVE_SRAT                     TRUE
+////#define BLDOPT_REMOVE_SLIT                     TRUE
+//#define BLDOPT_REMOVE_WHEA                     TRUE
+//#define BLDOPT_REMOVE_DMI                      TRUE
+
+/*f15 Rev A1 ucode patch CpuF15OrMicrocodePatch0600011F */
+#define BLDOPT_REMOVE_EARLY_SAMPLES		FALSE
+
+//#define BLDOPT_REMOVE_HT_ASSIST                TRUE
+//#define BLDOPT_REMOVE_MSG_BASED_C1E            TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS              TRUE
+
+/* Build configuration values here.
+ */
+#define BLDCFG_VRM_CURRENT_LIMIT                 120000
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD           0
+#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT          0
+#define BLDCFG_PLAT_NUM_IO_APICS                 3
+#define BLDCFG_CORE_LEVELING_MODE                CORE_LEVEL_LOWEST
+#define BLDCFG_MEM_INIT_PSTATE                   0
+#define BLDCFG_AMD_PSTATE_CAP_VALUE              0
+
+#define BLDCFG_AMD_PLATFORM_TYPE                  AMD_PLATFORM_SERVER
+
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT         DDR1333_FREQUENCY//1600
+#define BLDCFG_MEMORY_MODE_UNGANGED               TRUE
+#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE           TRUE
+#define BLDCFG_MEMORY_QUADRANK_TYPE               QUADRANK_REGISTERED
+#define BLDCFG_MEMORY_RDIMM_CAPABLE               TRUE
+#define BLDCFG_MEMORY_UDIMM_CAPABLE               TRUE
+#define BLDCFG_MEMORY_SODIMM_CAPABLE              FALSE
+#define BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB          TRUE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING    FALSE//TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING    FALSE//TRUE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING        FALSE//TRUE
+#define BLDCFG_MEMORY_POWER_DOWN                  FALSE
+#define BLDCFG_POWER_DOWN_MODE                    POWER_DOWN_BY_CHANNEL
+#define BLDCFG_ONLINE_SPARE                       FALSE
+#define BLDCFG_BANK_SWIZZLE                       TRUE
+#define BLDCFG_TIMING_MODE_SELECT                 TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT                DDR1333_FREQUENCY //DDR800_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL               TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM                FALSE
+#define BLDCFG_USE_BURST_MODE                     FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON               FALSE
+#define BLDCFG_ENABLE_ECC_FEATURE                 TRUE
+#define BLDCFG_ECC_REDIRECTION                    FALSE
+#define BLDCFG_SCRUB_IC_RATE                      0
+#define BLDCFG_ECC_SYNC_FLOOD                     TRUE
+#define BLDCFG_ECC_SYMBOL_SIZE                    4
+
+#define BLDCFG_PCI_MMIO_BASE                    CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE                    CONFIG_MMCONF_BUS_NUMBER
+
+/**
+ * Enable Message Based C1e CPU feature in multi-socket systems.
+ * BLDCFG_PLATFORM_C1E_OPDATA element be defined with a valid IO port value,
+ * else the feature cannot be enabled.
+ */
+#define BLDCFG_PLATFORM_C1E_MODE                  C1eModeMsgBased
+#define BLDCFG_PLATFORM_C1E_OPDATA                0x80//TODO
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1        0
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2        0
+
+#define BLDCFG_HEAP_DRAM_ADDRESS                  0xB0000
+#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS    0xD0000000
+#define BLDCFG_1GB_ALIGN                          FALSE
+//#define BLDCFG_PROCESSOR_SCOPE_NAME0              'C'
+//#define BLDCFG_PROCESSOR_SCOPE_NAME1              '0'
+//
+
+// Select the platform control flow mode for performance tuning.
+#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm
+
+/**
+ * Enable the probe filtering performance tuning feature.
+ * The probe filter provides filtering of broadcast probes to
+ * improve link bandwidth and performance for multi- node systems.
+ *
+ * This feature may interact with other performance features.
+ *  TRUE  -Enable the feature (default) if supported by all processors,
+ *         based on revision and presence of L3 cache.
+ *         The feature is not enabled if there are no coherent HT links.
+ *  FALSE -Do not enable the feature regardless of the configuration.
+ */
+//TODO enable it,
+//but AGESA set PFMode = 0; //PF Disable, HW never set PFInitDone
+//hang in F10HtAssistInit() do{...} while(PFInitDone != 1)
+#define BLDCFG_USE_HT_ASSIST	FALSE
+
+/**
+ * The socket and link match values are platform specific
+ */
+CONST MANUAL_BUID_SWAP_LIST ROMDATA s8226_manual_swaplist[2] =
+{
+	{
+		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		{ //BUID Swap List
+			{ //BUID Swaps
+				/* Each Non-coherent chain may have a list of device swaps,
+				 * Each item specify a device will be swap from its current id to a new one
+				 */
+				/* FromID 0x00 is the chain with the southbridge */
+				/* 'Move' device zero to device zero, All others are non applicable */
+				{0x00, 0x00}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+			},
+
+			{ //The ordered final BUIDs
+				/* Specify the final BUID to be zero, All others are non applicable */
+				0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+			}
+		}
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+
+#if CONFIG_HT3_SUPPORT == 1
+/**
+ * The socket and link match values are platform specific
+ *
+ */
+CONST CPU_TO_CPU_PCB_LIMITS ROMDATA s8226_cpu2cpu_limit_list[2] =
+{
+	{
+		/* On the reference platform, these settings apply to all coherent links */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set incoming and outgoing links to 16 bit widths, and 3.2GHz frequencies */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M,
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+
+CONST IO_PCB_LIMITS ROMDATA s8226_io_limit_list[2] =
+{
+	{
+		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set upstream and downstream links to 16 bit widths, and limit frequencies to 3.2GHz */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M, //Actually IO hub only support 2600M MAX
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+#else //CONFIG_HT3_SUPPORT == 0
+CONST CPU_TO_CPU_PCB_LIMITS ROMDATA s8226_cpu2cpu_limit_list[2] =
+{
+	{
+		/* On the reference platform, these settings apply to all coherent links */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY,
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+
+CONST IO_PCB_LIMITS ROMDATA s8226_io_limit_list[2] =
+{
+	{
+		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY,
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL
+	}
+};
+#endif //CONFIG_HT3_SUPPORT == 0
+
+/**
+ * HyperTransport links will typically require an equalization at high frequencies.
+ * This is called deemphasis.
+ *
+ * Deemphasis is specified as levels, for example, -3 db.
+ * There are two levels for each link, its receiver deemphasis level and its DCV level,
+ * which is based on the far side transmitter's deemphasis.
+ * For each link, different levels may be required at each link frequency.
+ *
+ * Coherent connections between processors should have an entry for the port on each processor.
+ * There should be one entry for the host root port of each non-coherent chain.
+ *
+ * AGESA initialization code does not set deemphasis on IO Devices.
+ * A default is provided for internal links of MCM processors, and
+ * those links will generally not need deemphasis structures.
+ */
+CONST CPU_HT_DEEMPHASIS_LEVEL ROMDATA s8226_deemphasis_list[] =
+{
+	/* Socket, Link, LowFreq, HighFreq, Receiver Deemphasis, Dcv Deemphasis */
+
+	/* Non-coherent link deemphasis. */
+	{0, 2, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{0, 2, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{0, 2, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{0, 2, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{0, 2, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{0, 2, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	{1, 2, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{1, 2, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{1, 2, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{1, 2, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{1, 2, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{1, 2, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	{2, 0, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{2, 0, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{2, 0, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{2, 0, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{2, 0, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{2, 0, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	{3, 0, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{3, 0, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{3, 0, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{3, 0, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{3, 0, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{3, 0, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	/* Coherent link deemphasis. */
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus3},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus6},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus6},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus8},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2600M, HT_FREQUENCY_MAX, DeemphasisLevelMinus11pre8, DcvLevelMinus11},
+
+	/* End of the list */
+	{
+		HT_LIST_TERMINAL
+	}
+};
+
+/**
+ * For systems using socket infrastructure that permits strapping the SBI
+ * address for each socket, this should be used to provide a socket ID value.
+ * This is referred to as the hardware method for socket naming, and is the
+ * preferred solution.
+ */
+/*
+ * I do NOT know howto config socket id in simnow,
+ * so use this software way to make HT works in simnow,
+ * real hardware do not need this Socket Map.
+ *
+ * A physical socket map for a 4 G34 Sockets MCM processors topology,
+ * reference the mainboard schemantic in detail.
+ *
+ */
+CONST SYSTEM_PHYSICAL_SOCKET_MAP ROMDATA s8226_socket_map[] =
+{
+#define HT_SOCKET0	0
+#define HT_SOCKET1	1
+#define HT_SOCKET2	2
+#define HT_SOCKET3	3
+
+/**
+ * 0-3 are sublink 0, 4-7 are sublink 1
+ */
+#define HT_LINK0A	0
+#define HT_LINK1A	1
+#define HT_LINK2A	2
+#define HT_LINK3A	3
+#define HT_LINK0B	4
+#define HT_LINK1B	5
+#define HT_LINK2B	6
+#define HT_LINK3B	7
+
+	/* Source Socket, Link, Target Socket */
+/*	{HT_SOCKET0, HT_LINK0A, HT_SOCKET1},
+	{HT_SOCKET0, HT_LINK0B, HT_SOCKET3},
+	{HT_SOCKET0, HT_LINK1A, HT_SOCKET1},
+	{HT_SOCKET0, HT_LINK1B, HT_SOCKET3},
+	{HT_SOCKET0, HT_LINK3A, HT_SOCKET2},
+	{HT_SOCKET0, HT_LINK3B, HT_SOCKET2},
+
+	{HT_SOCKET1, HT_LINK0A, HT_SOCKET2},
+	{HT_SOCKET1, HT_LINK0B, HT_SOCKET3},
+	{HT_SOCKET1, HT_LINK1A, HT_SOCKET0},
+	{HT_SOCKET1, HT_LINK1B, HT_SOCKET2},
+	{HT_SOCKET1, HT_LINK3A, HT_SOCKET0},
+	{HT_SOCKET1, HT_LINK3B, HT_SOCKET3},
+
+	{HT_SOCKET2, HT_LINK0A, HT_SOCKET3},
+	{HT_SOCKET2, HT_LINK0B, HT_SOCKET0},
+	{HT_SOCKET2, HT_LINK1A, HT_SOCKET3},
+	{HT_SOCKET2, HT_LINK1B, HT_SOCKET1},
+	{HT_SOCKET2, HT_LINK3A, HT_SOCKET1},
+	{HT_SOCKET2, HT_LINK3B, HT_SOCKET0},
+
+	{HT_SOCKET3, HT_LINK0A, HT_SOCKET2},
+	{HT_SOCKET3, HT_LINK0B, HT_SOCKET1},
+	{HT_SOCKET3, HT_LINK1A, HT_SOCKET1},
+	{HT_SOCKET3, HT_LINK1B, HT_SOCKET0},
+	{HT_SOCKET3, HT_LINK3A, HT_SOCKET0},
+	{HT_SOCKET3, HT_LINK3B, HT_SOCKET2}, */
+};
+
+CONST AP_MTRR_SETTINGS ROMDATA s8226_ap_mtrr_list[] =
+{
+	{AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E},
+	{AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E},
+	{AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_C0000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_C8000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_D0000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_D8000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_E0000,  0x1818181818181818},
+	{AMD_AP_MTRR_FIX4k_E8000,  0x1818181818181818},
+	{AMD_AP_MTRR_FIX4k_F0000,  0x1818181818181818},
+	{AMD_AP_MTRR_FIX4k_F8000,  0x1818181818181818},
+	{CPU_LIST_TERMINAL}
+};
+
+#define BLDCFG_BUID_SWAP_LIST			&s8226_manual_swaplist
+#define BLDCFG_HTFABRIC_LIMITS_LIST		&s8226_cpu2cpu_limit_list
+#define BLDCFG_HTCHAIN_LIMITS_LIST		&s8226_io_limit_list
+#define BLDCFG_PLATFORM_DEEMPHASIS_LIST		&s8226_deemphasis_list
+#define BLDCFG_AP_MTRR_SETTINGS_LIST		&s8226_ap_mtrr_list
+//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP	&s8226_socket_map
+
+
+/*  Process the options...
+ * This file include MUST occur AFTER the user option selection settings
+ */
+#define AGESA_ENTRY_INIT_RESET                    TRUE//FALSE
+#define AGESA_ENTRY_INIT_RECOVERY                 FALSE
+#define AGESA_ENTRY_INIT_EARLY                    TRUE
+#define AGESA_ENTRY_INIT_POST                     TRUE
+#define AGESA_ENTRY_INIT_ENV                      TRUE
+#define AGESA_ENTRY_INIT_MID                      TRUE
+#define AGESA_ENTRY_INIT_LATE                     TRUE
+#define AGESA_ENTRY_INIT_S3SAVE                   TRUE
+#define AGESA_ENTRY_INIT_RESUME                   TRUE
+#define AGESA_ENTRY_INIT_LATE_RESTORE             TRUE
+#define AGESA_ENTRY_INIT_GENERAL_SERVICES         TRUE
+
+/*
+#if (CONFIG_CPU_AMD_AGESA_FAMILY15 == 1)
+  #define BLDOPT_REMOVE_FAMILY_10_SUPPORT         TRUE
+#endif
+#if (CONFIG_CPU_AMD_AGESA_FAMILY10 == 1)
+  #define BLDOPT_REMOVE_FAMILY_15_SUPPORT         TRUE
+#endif
+*/
+
+//#include "GnbInterface.h"     /*prototype for GnbInterfaceStub*/
+#include "SanMarinoInstall.h"
+
+/*----------------------------------------------------------------------------------------
+ *                        CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+//reference BKDG Table87: works
+#define F15_WL_SEED 0x3B //family15 BKDG recommand 3B RDIMM, 1A UDIMM.
+#define SEED_A 0x54
+#define SEED_B 0x4D
+#define SEED_C 0x45
+#define SEED_D 0x40
+
+#define F10_WL_SEED 0x3B //family10 BKDG recommand 3B RDIMM, 1A UDIMM.
+//4B 41 51
+
+/*
+ *  Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ *  (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ *  is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ *  use its default conservative settings.
+ */
+CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+	//
+	// The following macros are supported (use comma to separate macros):
+	//
+	// MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
+	//      The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
+	//      AGESA will base on this value to disable unused MemClk to save power.
+	//      Example:
+	//      BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
+	//           Bit AM3/S1g3 pin name
+	//           0   M[B,A]_CLK_H/L[0]
+	//           1   M[B,A]_CLK_H/L[1]
+	//           2   M[B,A]_CLK_H/L[2]
+	//           3   M[B,A]_CLK_H/L[3]
+	//           4   M[B,A]_CLK_H/L[4]
+	//           5   M[B,A]_CLK_H/L[5]
+	//           6   M[B,A]_CLK_H/L[6]
+	//           7   M[B,A]_CLK_H/L[7]
+	//      And platform has the following routing:
+	//           CS0   M[B,A]_CLK_H/L[4]
+	//           CS1   M[B,A]_CLK_H/L[2]
+	//           CS2   M[B,A]_CLK_H/L[3]
+	//           CS3   M[B,A]_CLK_H/L[5]
+	//      Then platform can specify the following macro:
+	//      MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
+	//
+	// CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
+	//      The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
+	//      AGESA will base on this value to tristate unused CKE to save power.
+	//
+	// ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
+	//      The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
+	//      AGESA will base on this value to tristate unused ODT pins to save power.
+	//
+	// CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
+	//      The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
+	//      AGESA will base on this value to tristate unused Chip select to save power.
+	//
+	// NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
+	//      Specifies the number of DIMM slots per channel.
+	//
+	// NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
+	//      Specifies the number of Chip selects per channel.
+	//
+	// NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
+	//      Specifies the number of channels per socket.
+	//
+	// OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
+	//      Specifies DDR bus speed of channel ChannelID on socket SocketID.
+	//
+	// DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
+	//      Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
+	//
+	// WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+	//      Byte6Seed, Byte7Seed, ByteEccSeed)
+	//      Specifies the write leveling seed for a channel of a socket.
+	//
+
+	/* Specifies the write leveling seed for a channel of a socket.
+	 * WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID,
+	 *                     Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed,
+	 *                     Byte4Seed, Byte5Seed, Byte6Seed, Byte7Seed,
+	 *                     ByteEccSeed)
+	 */
+	WRITE_LEVELING_SEED(
+			ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS,
+			F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED,
+			F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED,
+			F15_WL_SEED),
+
+	/* HW_RXEN_SEED(SocketID, ChannelID, DimmID,
+	 *              Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed,
+	 *              Byte4Seed, Byte5Seed, Byte6Seed, Byte7Seed, ByteEccSeed)
+	 */
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
+		SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A,
+		SEED_A),
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_B, ALL_DIMMS,
+		SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B,
+		SEED_B),
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_C, ALL_DIMMS,
+		SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C,
+		SEED_C),
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_D, ALL_DIMMS,
+		SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D,
+		SEED_D),
+
+	NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 3), //max 3
+	PSO_END
+};
+
+/*
+ * These tables are optional and may be used to adjust memory timing settings
+ */
+//HY Customer table
+UINT8 AGESA_MEM_TABLE_HY[][sizeof (MEM_TABLE_ALIAS)] =
+{
+	// Hardcoded Memory Training Values
+
+	// The following macro should be used to override training values for your platform
+	//
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
+	//
+	//   NOTE:
+	//   The following training hardcode values are example values that were taken from a tilapia motherboard
+	//   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
+	//   the table and replace the byte lane values with your own.
+	//
+	//                                                                               ------------------ BYTE LANES ----------------------
+	//                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
+	// Write Data Timing
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
+
+	// DQS Receiver Enable
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
+
+	// Write DQS Delays
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
+
+	// Read DQS Delays
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
+	//--------------------------------------------------------------------------------------------------------------------------------------------------
+	// TABLE END
+	NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
+};
+UINT8 SizeOfTableHy = sizeof (AGESA_MEM_TABLE_HY) / sizeof (AGESA_MEM_TABLE_HY[0]);
+
diff --git a/src/mainboard/tyan/s8226/cmos.layout b/src/mainboard/tyan/s8226/cmos.layout
new file mode 100644
index 0000000..3b98cbb
--- /dev/null
+++ b/src/mainboard/tyan/s8226/cmos.layout
@@ -0,0 +1,118 @@
+#*****************************************************************************
+#
+#  This file is part of the coreboot project.
+#
+#  Copyright (C) 2011 Advanced Micro Devices, Inc.
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; version 2 of the License.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#*****************************************************************************
+
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399          1       e       2        multi_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432          8       h       0        boot_countdown
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        amd_reserved
+
+
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+8     0     400Mhz
+8     1     333Mhz
+8     2     266Mhz
+8     3     200Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/tyan/s8226/devicetree.cb b/src/mainboard/tyan/s8226/devicetree.cb
new file mode 100644
index 0000000..4459019
--- /dev/null
+++ b/src/mainboard/tyan/s8226/devicetree.cb
@@ -0,0 +1,128 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+chip northbridge/amd/agesa/family15/root_complex
+	device lapic_cluster 0 on
+		chip cpu/amd/agesa/family15
+			device lapic 0x20 on end #f15
+			#device lapic 0x10 on end #f10
+		end
+	end
+	device pci_domain 0 on
+		subsystemid 0x15d9 0xab11 inherit #Tyan
+		chip northbridge/amd/agesa/family15 # CPU side of HT root complex
+			device pci 18.0 on     # Put IO-HUB at link_num 0, Instead of HT Link topology
+				chip northbridge/amd/cimx/rd890 # Southbridge PCI side of HT Root complex
+					device pci 0.0 on  end # HT Root Complex 0x9600
+					device pci 0.1 off end # CLKCONFIG
+					device pci 2.0 on  end # GPP1 Port0  x16 SLOT4, 0x5A16
+					device pci 3.0 off end # GPP1 Port1
+					device pci 4.0 on end # GPP3a Port0  x4 SAS
+					device pci 5.0 on end # GPP3a Port1
+					device pci 6.0 on end # GPP3a Port2
+					device pci 7.0 on end # GPP3a Port3
+					device pci 8.0 off end # NB/SB Link P2P bridge, should be hidden at boot time
+					device pci 9.0 on end # GPP3a Port4  x1 NC
+					device pci a.0 on end # GPP3a Port5  x1 NC
+					device pci b.0 on end # GPP2 Port0 (Not for sr5650)
+					device pci c.0 off end # GPP2 Port1 (Not for sr5650/sr5670)
+					device pci d.0 on  end # GPP3b Port0 (Not for sr5650/sr5670) 0x5A1E, Intel 82576
+					register "gpp1_configuration" = "0"   # Configuration 16:0 default
+					register "gpp2_configuration" = "0"   # Configuration 8:8
+					register "gpp3a_configuration" = "2"   # 2 Configuration 4:1:1:0:0:0, 11 Configuration 1:1:1:1:1:1
+					register "port_enable" = "0x3ef6"
+				end #northbridge/amd/cimx/rd890
+				chip southbridge/amd/cimx/sb700 # it is under NB/SB Link, but on the same pci bus
+					device pci 11.0 on end # SATA
+					device pci 12.0 on end # USB1
+					device pci 12.1 on end # USB1
+					device pci 12.2 on end # USB1
+					device pci 13.0 on end # USB2
+					device pci 13.1 on end # USB2
+					device pci 13.2 on end # USB2
+					device pci 14.0 on end # SM
+					device pci 14.1 off end # IDE  0x439c
+					device pci 14.2 off end # HDA  0x4383, s8226 not have codec.
+					device pci 14.3 on # LPC  0x439d
+						chip superio/winbond/w83627dhg
+							device pnp 2e.0 off #  Floppy
+								io 0x60 = 0x3f0
+								irq 0x70 = 6
+								drq 0x74 = 2
+							end
+							device pnp 2e.1 off #  Parallel Port
+								io 0x60 = 0x378
+								irq 0x70 = 7
+							end
+							device pnp 2e.2 on  #  Com1
+								io 0x60 = 0x3f8
+								irq 0x70 = 4
+							end
+							device pnp 2e.3 on  #  Com2
+								io 0x60 = 0x2f8
+								irq 0x70 = 3
+							end
+							## though UARTs are on the NUVOTON BMC, superio only used to support PS2 KB/MS##
+							device pnp 2e.5 on #  PS/2 keyboard & mouse
+								io 0x60 = 0x60
+								io 0x62 = 0x64
+								irq 0x70 = 0x01 #keyboard
+								irq 0x72 = 0x0C #mouse
+							end
+							device pnp 2e.6 off #  SPI
+							end
+							device pnp 2e.307 off #  GPIO6
+							end
+							device pnp 2e.8 off #  WDTO#, PLED
+							end
+							device pnp 2e.009 off #  GPIO2
+							end
+							device pnp 2e.109 off #  GPIO3
+							end
+							device pnp 2e.209 off #  GPIO4
+							end
+							device pnp 2e.309 off #  GPIO5
+							end
+							device pnp 2e.a off #  ACPI
+							end
+							device pnp 2e.b off # HWM
+								io 0x60 = 0x290
+							end
+							device pnp 2e.c off # PECI, SST
+							end
+						end #superio/winbond/w83627dhg
+						chip drivers/i2c/w83795
+							device pnp 5e on #hwm
+							end
+						end #drivers/i2c/w83795
+					end # LPC
+					device pci 14.4 on end # PCI 0x4384
+					device pci 14.5 on end # USB 3
+					register "boot_switch_sata_ide" = "0"   # 0: boot from SATA. 1: IDE
+				end # southbridge/amd/cimx/sb700
+			end # device pci 18.0
+
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+			device pci 18.4 on end
+			device pci 18.5 on end #f15
+		end #chip northbridge/amd/agesa/family15 # CPU side of HT root complex
+	end #pci_domain
+end #northbridge/amd/agesa/family15/root_complex
+
diff --git a/src/mainboard/tyan/s8226/dimmSpd.c b/src/mainboard/tyan/s8226/dimmSpd.c
new file mode 100644
index 0000000..df33088
--- /dev/null
+++ b/src/mainboard/tyan/s8226/dimmSpd.c
@@ -0,0 +1,222 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_ids.h>
+
+AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info);
+#define DIMENSION(array)(sizeof (array)/ sizeof (array [0]))
+
+/* SP5100 GPIO 49-52 contoled by SMBUS PCI_Reg 0x52 */
+#define SP5100_GPIO37_46_47_48	0xA6
+#define SP5100_GPIO49_52	0x50
+
+/**
+ * TODO not support all GPIO yet
+ * @param reg -GPIO Cntrl Register
+ * @param out -GPIO bitmap
+ * @param out -GPIO enable bitmap
+ * @return  old setting
+ */
+static u8 sp5100_set_gpio(u8 reg, u8 out, u8 enable)
+{
+	u8 value, ret;
+	device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBUS
+
+	value = pci_read_config8(sm_dev, reg);
+	ret = value;
+	value &= ~(enable);
+	value |= out;
+	value &= ~(enable << 4);
+	pci_write_config8(sm_dev, reg, value);
+
+	return ret;
+}
+
+static void sp5100_restore_gpio(u8 reg, u8 value)
+{
+	device_t sm_dev = PCI_DEV(0, 0x14, 0);
+	pci_write_config8(sm_dev, reg, value);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * SPD address table - porting required
+ */
+static const UINT8 spdAddressLookup [2] [2] [3] = { // socket, channel, dimm
+	/* socket 0 */
+	{
+		{0xA0, 0xA4, 0xA8},
+		{0xA2, 0xA6, 0xAA},
+	},
+	/* socket 1 */
+	{
+		{0xA0, 0xA4, 0xA8},
+		{0xA2, 0xA6, 0xAA},
+	},
+};
+
+/*-----------------------------------------------------------------------------
+ *
+ * readSmbusByteData - read a single SPD byte from any offset
+ */
+
+static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
+{
+	unsigned int status;
+	UINT64 limit;
+
+	address |= 1; // set read bit
+
+	outb(0xFF, iobase + 0);                // clear error status
+	outb(0x1F, iobase + 1);                // clear error status
+	outb(offset, iobase + 3);              // offset in eeprom
+	outb(address, iobase + 4);             // slave address and read bit
+	outb(0x48, iobase + 2);                // read byte command
+
+	// time limit to avoid hanging for unexpected error status (should never happen)
+	limit = __rdtsc () + 2000000000 / 10;
+	for (;;)
+	{
+		status = inb(iobase);
+		if (__rdtsc () > limit) break;
+		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
+		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
+		break;
+	}
+
+	buffer [0] = inb(iobase + 5);
+	if (status == 2) status = 0;                      // check for done with no errors
+	return status;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * readSmbusByte - read a single SPD byte from the default offset
+ *                 this function is faster function readSmbusByteData
+ */
+
+static int readSmbusByte (int iobase, int address, char *buffer)
+{
+	unsigned int status;
+	UINT64 limit;
+
+	outb(0xFF, iobase + 0);                // clear error status
+	outb(0x44, iobase + 2);                // read command
+
+	// time limit to avoid hanging for unexpected error status
+	limit = __rdtsc () + 2000000000 / 10;
+	for (;;)
+	{
+		status = inb(iobase);
+		if (__rdtsc () > limit) break;
+		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
+		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
+		break;
+	}
+
+	buffer [0] = inb(iobase + 5);
+	if (status == 2) status = 0;                      // check for done with no errors
+	return status;
+}
+
+/*---------------------------------------------------------------------------
+ *
+ * readspd - Read one or more SPD bytes from a DIMM.
+ *           Start with offset zero and read sequentially.
+ *           Optimization relies on autoincrement to avoid
+ *           sending offset for every byte.
+ *          Reads 128 bytes in 7-8 ms at 400 KHz.
+ */
+
+static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
+{
+	int index, error;
+
+	/* read the first byte using offset zero */
+	error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
+	if (error) {
+		return error;
+	}
+
+	/* read the remaining bytes using auto-increment for speed */
+	for (index = 1; index < count; index++)
+	{
+		error = readSmbusByte (iobase, SmbusSlaveAddress, buffer + index);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
+static void setupFch (int ioBase)
+{
+	outb(66000000 / 400000 / 4, ioBase + 0x0E); /* set SMBus clock to 400 KHz */
+}
+
+AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info)
+{
+	AGESA_STATUS status;
+	int spdAddress, ioBase;
+	u8 i2c_channel;
+	u8 backup;
+	device_t sm_dev;
+
+	if (info->SocketId     >= DIMENSION (spdAddressLookup      )) return AGESA_ERROR;
+	if (info->MemChannelId >= DIMENSION (spdAddressLookup[0]   )) return AGESA_ERROR;
+	if (info->DimmId       >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR;
+	i2c_channel = (UINT8) info->SocketId;
+
+	/* set IDTQS3253 i2c channel
+	 * GPIO49,48 control the S1,S0
+	 *  S1 S0 true table
+	 *   0  0   channel 0
+	 *   0  1   channel 1
+	 *   1  0   channel 2   -  Socket 0
+	 *   1  1   channel 3   -  Socket 1
+	 * Note: Above is abstracted from Schemetic. But actually it seems to be other way.
+	 *   1  0   channel 2   -  Socket 1
+	 *   1  1   channel 3   -  Socket 0
+	 * Note: The DIMMs need to be plugged in from the farthest slot for each channel.
+	 */
+	backup = sp5100_set_gpio(SP5100_GPIO49_52, 0x1, 0x1);
+	sp5100_set_gpio(SP5100_GPIO37_46_47_48, (~i2c_channel & 1) << 3, 0x1 << 3);
+
+	spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId];
+	if (spdAddress == 0)
+		return AGESA_ERROR;
+
+	/*
+	 * SMBus Base Address was set during southbridge early setup.
+	 * e.g. sb700 IO mapped SMBUS_IO_BASE 0x6000, CIMX using 0xB00 as default
+	 */
+	sm_dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB700_SM), 0);
+	ioBase = pci_read_config32(sm_dev, 0x90) & (0xFFFFFFF0);
+	setupFch(ioBase);
+
+	status = readspd(ioBase, spdAddress, (void *)info->Buffer, 256);
+	sp5100_restore_gpio(SP5100_GPIO49_52, backup);
+
+	return status;
+}
diff --git a/src/mainboard/tyan/s8226/dsdt.asl b/src/mainboard/tyan/s8226/dsdt.asl
new file mode 100644
index 0000000..f26359f
--- /dev/null
+++ b/src/mainboard/tyan/s8226/dsdt.asl
@@ -0,0 +1,1794 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+	"DSDT.AML",	/* Output filename */
+	"DSDT",		/* Signature */
+	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
+	"AMD   ",	/* OEMID */
+	"S8226   ",	/* TABLE ID */
+	0x00010001	/* OEM Revision */
+	)
+{	/* Start of ASL file */
+	/* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
+
+	/* Data to be patched by the BIOS during POST */
+	/* FIXME the patching is not done yet! */
+	/* Memory related values */
+	Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
+	Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+	Name(PBLN, 0x0)	/* Length of BIOS area */
+
+	Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS)	/* Base address of PCIe config space */
+	Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+
+	Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+	Name(SSFG, 0x0D)	/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+	/* USB overcurrent mapping pins.   */
+	Name(UOM0, 0)
+	Name(UOM1, 2)
+	Name(UOM2, 0)
+	Name(UOM3, 7)
+	Name(UOM4, 2)
+	Name(UOM5, 2)
+	Name(UOM6, 6)
+	Name(UOM7, 2)
+	Name(UOM8, 6)
+	Name(UOM9, 6)
+
+	/* Some global data */
+	Name(OSTP, 3)		/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+	Name(OSV, Ones)	/* Assume nothing */
+	Name(PMOD, One)	/* Assume APIC */
+
+	/*
+	 * Processor Object
+	 *
+	 */
+	Scope (\_PR) {		/* define processor scope */
+		Processor(
+			C000,		/* name space name */
+			0x00,		/* Unique number for this processor */
+			0x810,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+			//#include "acpi/cpstate.asl"
+		}
+		Processor(C001, 0x01, 0x00000000, 0x00) {}
+		Processor(C002, 0x02, 0x00000000, 0x00) {}
+		Processor(C003, 0x03, 0x00000000, 0x00) {}
+		Processor(C004, 0x04, 0x00000000, 0x00) {}
+		Processor(C005, 0x05, 0x00000000, 0x00) {}
+		Processor(C006, 0x06, 0x00000000, 0x00) {}
+		Processor(C007, 0x07, 0x00000000, 0x00) {}
+		Processor(C008, 0x08, 0x00000000, 0x00) {}
+		Processor(C009, 0x09, 0x00000000, 0x00) {}
+		Processor(C00A, 0x0A, 0x00000000, 0x00) {}
+		Processor(C00B, 0x0B, 0x00000000, 0x00) {}
+		Processor(C00C, 0x0C, 0x00000000, 0x00) {}
+		Processor(C00D, 0x0D, 0x00000000, 0x00) {}
+		Processor(C00E, 0x0E, 0x00000000, 0x00) {}
+		Processor(C00F, 0x0F, 0x00000000, 0x00) {}
+		Processor(C010, 0x10, 0x00000000, 0x00) {}
+		Processor(C011, 0x11, 0x00000000, 0x00) {}
+		Processor(C012, 0x12, 0x00000000, 0x00) {}
+		Processor(C013, 0x13, 0x00000000, 0x00) {}
+		Processor(C014, 0x14, 0x00000000, 0x00) {}
+		Processor(C015, 0x15, 0x00000000, 0x00) {}
+		Processor(C016, 0x16, 0x00000000, 0x00) {}
+		Processor(C017, 0x17, 0x00000000, 0x00) {}
+		Processor(C018, 0x18, 0x00000000, 0x00) {}
+		Processor(C019, 0x19, 0x00000000, 0x00) {}
+		Processor(C01A, 0x1A, 0x00000000, 0x00) {}
+		Processor(C01B, 0x1B, 0x00000000, 0x00) {}
+		Processor(C01C, 0x1C, 0x00000000, 0x00) {}
+		Processor(C01D, 0x1D, 0x00000000, 0x00) {}
+		Processor(C01E, 0x1E, 0x00000000, 0x00) {}
+		Processor(C01F, 0x1F, 0x00000000, 0x00) {}
+		Processor(C020, 0x20, 0x00000000, 0x00) {}
+		Processor(C021, 0x21, 0x00000000, 0x00) {}
+		Processor(C022, 0x22, 0x00000000, 0x00) {}
+		Processor(C023, 0x23, 0x00000000, 0x00) {}
+		Processor(C024, 0x24, 0x00000000, 0x00) {}
+		Processor(C025, 0x25, 0x00000000, 0x00) {}
+		Processor(C026, 0x26, 0x00000000, 0x00) {}
+		Processor(C027, 0x27, 0x00000000, 0x00) {}
+		Processor(C028, 0x28, 0x00000000, 0x00) {}
+		Processor(C029, 0x29, 0x00000000, 0x00) {}
+		Processor(C02A, 0x2A, 0x00000000, 0x00) {}
+		Processor(C02B, 0x2B, 0x00000000, 0x00) {}
+		Processor(C02C, 0x2C, 0x00000000, 0x00) {}
+		Processor(C02D, 0x2D, 0x00000000, 0x00) {}
+		Processor(C02E, 0x2E, 0x00000000, 0x00) {}
+		Processor(C02F, 0x2F, 0x00000000, 0x00) {}
+		Alias (C000, CPU0)
+		Alias (C001, CPU1)
+		Alias (C002, CPU2)
+		Alias (C003, CPU3)
+		Alias (C004, CPU4)
+		Alias (C005, CPU5)
+		Alias (C006, CPU6)
+		Alias (C007, CPU7)
+		Alias (C008, CPU8)
+	} /* End _PR scope */
+
+	/* PIC IRQ mapping registers, C00h-C01h */
+	OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+		Field(PRQM, ByteAcc, NoLock, Preserve) {
+		PRQI, 0x00000008,
+		PRQD, 0x00000008,  /* Offset: 1h */
+	}
+	IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+		PINA, 0x00000008,	/* Index 0 */
+		PINB, 0x00000008,	/* Index 1 */
+		PINC, 0x00000008,	/* Index 2 */
+		PIND, 0x00000008,	/* Index 3 */
+		AINT, 0x00000008,	/* Index 4 */
+		SINT, 0x00000008,	/* Index 5 */
+		    , 0x00000008,	/* Index 6 */
+		AAUD, 0x00000008,	/* Index 7 */
+		AMOD, 0x00000008,	/* Index 8 */
+		PINE, 0x00000008,	/* Index 9 */
+		PINF, 0x00000008,	/* Index A */
+		PING, 0x00000008,	/* Index B */
+		PINH, 0x00000008,	/* Index C */
+	}
+
+	/* PCI Error control register */
+	OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
+		Field(PERC, ByteAcc, NoLock, Preserve) {
+		SENS, 0x00000001,
+		PENS, 0x00000001,
+		SENE, 0x00000001,
+		PENE, 0x00000001,
+	}
+
+	/* Client Management index/data registers */
+	OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
+		Field(CMT, ByteAcc, NoLock, Preserve) {
+		CMTI, 8,
+		/* Client Management Data register */
+		G64E, 1,
+		G64O, 1,
+		G32O, 2,
+		    , 2,
+		GPSL, 2,
+	}
+
+	/* GPM Port register */
+	OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
+		Field(GPT, ByteAcc, NoLock, Preserve) {
+		GPB0,1,
+		GPB1,1,
+		GPB2,1,
+		GPB3,1,
+		GPB4,1,
+		GPB5,1,
+		GPB6,1,
+		GPB7,1,
+	}
+
+	/* Flash ROM program enable register */
+	OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
+		Field(FRE, ByteAcc, NoLock, Preserve) {
+		    , 0x00000006,
+		FLRE, 0x00000001,
+	}
+
+	/* PM2 index/data registers */
+	OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
+		Field(PM2R, ByteAcc, NoLock, Preserve) {
+		PM2I, 0x00000008,
+		PM2D, 0x00000008,
+	}
+
+	/* Power Management I/O registers */
+	OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+		Field(PIOR, ByteAcc, NoLock, Preserve) {
+		PIOI, 0x00000008,
+		PIOD, 0x00000008,
+	}
+	IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+		Offset(0x00),	/* MiscControl */
+		, 1,
+		T1EE, 1,
+		T2EE, 1,
+		Offset(0x01),	/* MiscStatus */
+		, 1,
+		T1E, 1,
+		T2E, 1,
+		Offset(0x04),	/* SmiWakeUpEventEnable3 */
+		, 7,
+		SSEN, 1,
+		Offset(0x07),	/* SmiWakeUpEventStatus3 */
+		, 7,
+		CSSM, 1,
+		Offset(0x10),	/* AcpiEnable */
+		, 6,
+		PWDE, 1,
+		Offset(0x1C),	/* ProgramIoEnable */
+		, 3,
+		MKME, 1,
+		IO3E, 1,
+		IO2E, 1,
+		IO1E, 1,
+		IO0E, 1,
+		Offset(0x1D),	/* IOMonitorStatus */
+		, 3,
+		MKMS, 1,
+		IO3S, 1,
+		IO2S, 1,
+		IO1S, 1,
+		IO0S,1,
+		Offset(0x20),	/* AcpiPmEvtBlk */
+		APEB, 16,
+		Offset(0x36),	/* GEvtLevelConfig */
+		, 6,
+		ELC6, 1,
+		ELC7, 1,
+		Offset(0x37),	/* GPMLevelConfig0 */
+		, 3,
+		PLC0, 1,
+		PLC1, 1,
+		PLC2, 1,
+		PLC3, 1,
+		PLC8, 1,
+		Offset(0x38),	/* GPMLevelConfig1 */
+		, 1,
+		 PLC4, 1,
+		 PLC5, 1,
+		, 1,
+		 PLC6, 1,
+		 PLC7, 1,
+		Offset(0x3B),	/* PMEStatus1 */
+		GP0S, 1,
+		GM4S, 1,
+		GM5S, 1,
+		APS, 1,
+		GM6S, 1,
+		GM7S, 1,
+		GP2S, 1,
+		STSS, 1,
+		Offset(0x55),	/* SoftPciRst */
+		SPRE, 1,
+		, 1,
+		, 1,
+		PNAT, 1,
+		PWMK, 1,
+		PWNS, 1,
+
+		/* 	Offset(0x61), */	/*  Options_1 */
+		/* 		,7,  */
+		/* 		R617,1, */
+
+		Offset(0x65),	/* UsbPMControl */
+		, 4,
+		URRE, 1,
+		Offset(0x68),	/* MiscEnable68 */
+		, 3,
+		TMTE, 1,
+		, 1,
+		Offset(0x92),	/* GEVENTIN */
+		, 7,
+		E7IS, 1,
+		Offset(0x96),	/* GPM98IN */
+		G8IS, 1,
+		G9IS, 1,
+		Offset(0x9A),	/* EnhanceControl */
+		,7,
+		HPDE, 1,
+		Offset(0xA8),	/* PIO7654Enable */
+		IO4E, 1,
+		IO5E, 1,
+		IO6E, 1,
+		IO7E, 1,
+		Offset(0xA9),	/* PIO7654Status */
+		IO4S, 1,
+		IO5S, 1,
+		IO6S, 1,
+		IO7S, 1,
+	}
+
+	/* PM1 Event Block
+	* First word is PM1_Status, Second word is PM1_Enable
+	*/
+	OperationRegion(P1EB, SystemIO, APEB, 0x04)
+		Field(P1EB, ByteAcc, NoLock, Preserve) {
+		TMST, 1,
+		,    3,
+		BMST,    1,
+		GBST,   1,
+		Offset(0x01),
+		PBST, 1,
+		, 1,
+		RTST, 1,
+		, 3,
+		PWST, 1,
+		SPWS, 1,
+		Offset(0x02),
+		TMEN, 1,
+		, 4,
+		GBEN, 1,
+		Offset(0x03),
+		PBEN, 1,
+		, 1,
+		RTEN, 1,
+		, 3,
+		PWDA, 1,
+	}
+
+	OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100)
+		Field (GRAM, ByteAcc, Lock, Preserve)
+		{
+			Offset (0x10),
+			FLG0,   8
+		}
+
+	Scope(\_SB) {
+		/* PCIe Configuration Space for CONFIG_MMCONF_BUS_NUMBER busses */
+		OperationRegion(PCFG, SystemMemory, PCBA, PCLN)
+			Field(PCFG, ByteAcc, NoLock, Preserve) {
+			/* Byte offsets are computed using the following technique:
+			 * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
+			 * The 8 comes from 8 functions per device, and 4096 bytes per function config space
+			*/
+			Offset(0x00088024),	/* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
+			STB5, 32,
+			Offset(0x00098042),	/* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
+			PT0D, 1,
+			PT1D, 1,
+			PT2D, 1,
+			PT3D, 1,
+			PT4D, 1,
+			PT5D, 1,
+			PT6D, 1,
+			PT7D, 1,
+			PT8D, 1,
+			PT9D, 1,
+			Offset(0x000A0004),	/* Byte offset to SMBUS	register 4h - Bus 0, Device 20, Function 0 */
+			SBIE, 1,
+			SBME, 1,
+			Offset(0x000A0008),	/* Byte offset to SMBUS	register 8h - Bus 0, Device 20, Function 0 */
+			SBRI, 8,
+			Offset(0x000A0014),	/* Byte offset to SMBUS	register 14h - Bus 0, Device 20, Function 0 */
+			SBB1, 32,
+			Offset(0x000A0078),	/* Byte offset to SMBUS	register 78h - Bus 0, Device 20, Function 0 */
+			,14,
+			P92E, 1,		/* Port92 decode enable */
+		}
+
+		OperationRegion(SB5, SystemMemory, STB5, 0x1000)
+			Field(SB5, AnyAcc, NoLock, Preserve){
+			/* Port 0 */
+			Offset(0x120),		/* Port 0 Task file status */
+			P0ER, 1,
+			, 2,
+			P0DQ, 1,
+			, 3,
+			P0BY, 1,
+			Offset(0x128),		/* Port 0 Serial ATA status */
+			P0DD, 4,
+			, 4,
+			P0IS, 4,
+			Offset(0x12C),		/* Port 0 Serial ATA control */
+			P0DI, 4,
+			Offset(0x130),		/* Port 0 Serial ATA error */
+			, 16,
+			P0PR, 1,
+
+			/* Port 1 */
+			offset(0x1A0),		/* Port 1 Task file status */
+			P1ER, 1,
+			, 2,
+			P1DQ, 1,
+			, 3,
+			P1BY, 1,
+			Offset(0x1A8),		/* Port 1 Serial ATA status */
+			P1DD, 4,
+			, 4,
+			P1IS, 4,
+			Offset(0x1AC),		/* Port 1 Serial ATA control */
+			P1DI, 4,
+			Offset(0x1B0),		/* Port 1 Serial ATA error */
+			, 16,
+			P1PR, 1,
+
+			/* Port 2 */
+			Offset(0x220),		/* Port 2 Task file status */
+			P2ER, 1,
+			, 2,
+			P2DQ, 1,
+			, 3,
+			P2BY, 1,
+			Offset(0x228),		/* Port 2 Serial ATA status */
+			P2DD, 4,
+			, 4,
+			P2IS, 4,
+			Offset(0x22C),		/* Port 2 Serial ATA control */
+			P2DI, 4,
+			Offset(0x230),		/* Port 2 Serial ATA error */
+			, 16,
+			P2PR, 1,
+
+			/* Port 3 */
+			Offset(0x2A0),		/* Port 3 Task file status */
+			P3ER, 1,
+			, 2,
+			P3DQ, 1,
+			, 3,
+			P3BY, 1,
+			Offset(0x2A8),		/* Port 3 Serial ATA status */
+			P3DD, 4,
+			, 4,
+			P3IS, 4,
+			Offset(0x2AC),		/* Port 3 Serial ATA control */
+			P3DI, 4,
+			Offset(0x2B0),		/* Port 3 Serial ATA error */
+			, 16,
+			P3PR, 1,
+		}
+	}
+
+	#include "acpi/routing.asl"
+
+	Scope(\_SB) {
+		Method(CkOT, 0){
+			if(LNotEqual(OSTP, Ones)) {Return(OSTP)}	/* OS version was already detected */
+			if(CondRefOf(\_OSI,Local1))
+			{
+				Store(1, OSTP)			/* Assume some form of XP */
+				if (\_OSI("Windows 2006"))      /* Vista */
+				{
+					Store(2, OSTP)
+				}
+			} else {
+				If(WCMP(\_OS,"Linux")) {
+					Store(3, OSTP)		/* Linux */
+				} Else {
+					Store(4, OSTP)		/* Gotta be WinCE */
+				}
+			}
+			Return(OSTP)
+		}
+
+		Method(_PIC, 0x01, NotSerialized)
+		{
+			If (Arg0)
+			{
+				\_SB.CIRQ()
+			}
+			Store(Arg0, PMOD)
+		}
+		Method(CIRQ, 0x00, NotSerialized){
+			Store(0, PINA)
+			Store(0, PINB)
+			Store(0, PINC)
+			Store(0, PIND)
+			Store(0, PINE)
+			Store(0, PINF)
+			Store(0, PING)
+			Store(0, PINH)
+		}
+
+		Name(IRQB, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Shared){15}
+		})
+
+		Name(IRQP, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
+		})
+
+		Name(PITF, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){9}
+		})
+
+		Device(INTA) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 1)
+
+			Method(_STA, 0) {
+				if (PINA) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTA._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_DIS\n") */
+				Store(0, PINA)
+			} /* End Method(_SB.INTA._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTA._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINA, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTA._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINA)
+			} /* End Method(_SB.INTA._SRS) */
+		} /* End Device(INTA) */
+
+		Device(INTB) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 2)
+
+			Method(_STA, 0) {
+				if (PINB) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTB._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_DIS\n") */
+				Store(0, PINB)
+			} /* End Method(_SB.INTB._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTB._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINB, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTB._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINB)
+			} /* End Method(_SB.INTB._SRS) */
+		} /* End Device(INTB)  */
+
+		Device(INTC) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 3)
+
+			Method(_STA, 0) {
+				if (PINC) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTC._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_DIS\n") */
+				Store(0, PINC)
+			} /* End Method(_SB.INTC._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTC._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINC, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTC._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINC)
+			} /* End Method(_SB.INTC._SRS) */
+		} /* End Device(INTC)  */
+
+		Device(INTD) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 4)
+
+			Method(_STA, 0) {
+				if (PIND) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTD._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_DIS\n") */
+				Store(0, PIND)
+			} /* End Method(_SB.INTD._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTD._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIND, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTD._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIND)
+			} /* End Method(_SB.INTD._SRS) */
+		} /* End Device(INTD)  */
+
+		Device(INTE) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 5)
+
+			Method(_STA, 0) {
+				if (PINE) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTE._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_DIS\n") */
+				Store(0, PINE)
+			} /* End Method(_SB.INTE._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTE._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINE, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTE._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINE)
+			} /* End Method(_SB.INTE._SRS) */
+		} /* End Device(INTE)  */
+
+		Device(INTF) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 6)
+
+			Method(_STA, 0) {
+				if (PINF) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTF._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_DIS\n") */
+				Store(0, PINF)
+			} /* End Method(_SB.INTF._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_PRS\n") */
+				Return(PITF)
+			} /* Method(_SB.INTF._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINF, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTF._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINF)
+			} /*  End Method(_SB.INTF._SRS) */
+		} /* End Device(INTF)  */
+
+		Device(INTG) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 7)
+
+			Method(_STA, 0) {
+				if (PING) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTG._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_DIS\n") */
+				Store(0, PING)
+			} /* End Method(_SB.INTG._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PING, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PING)
+			} /* End Method(_SB.INTG._SRS)  */
+		} /* End Device(INTG)  */
+
+		Device(INTH) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 8)
+
+			Method(_STA, 0) {
+				if (PINH) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTH._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_DIS\n") */
+				Store(0, PINH)
+			} /* End Method(_SB.INTH._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINH, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINH)
+			} /* End Method(_SB.INTH._SRS)  */
+		} /* End Device(INTH)   */
+
+	}   /* End Scope(_SB)  */
+
+
+	/* Supported sleep states: */
+	Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} )	/* (S0) - working state */
+
+	If (LAnd(SSFG, 0x01)) {
+		Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} )	/* (S1) - sleeping w/CPU context */
+	}
+	If (LAnd(SSFG, 0x02)) {
+		Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} )	/* (S2) - "light" Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x04)) {
+		Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} )	/* (S3) - Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x08)) {
+		Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} )	/* (S4) - Suspend to Disk */
+	}
+
+	Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} )	/* (S5) - Soft Off */
+
+	Name(\_SB.CSPS ,0)				/* Current Sleep State (S0, S1, S2, S3, S4, S5) */
+	Name(CSMS, 0)			/* Current System State */
+
+	/* Wake status package */
+	Name(WKST,Package(){Zero, Zero})
+
+	/*
+	* \_PTS - Prepare to Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+	*
+	* Exit:
+	*		-none-
+	*
+	* The _PTS control method is executed at the beginning of the sleep process
+	* for S1-S5. The sleeping value is passed to the _PTS control method.	This
+	* control method may be executed a relatively long time before entering the
+	* sleep state and the OS may abort	the operation without notification to
+	* the ACPI driver.  This method cannot modify the configuration or power
+	* state of any device in the system.
+	*/
+	Method(\_PTS, 1) {
+		/* DBGO("\\_PTS\n") */
+		/* DBGO("From S0 to S") */
+		/* DBGO(Arg0) */
+		/* DBGO("\n") */
+
+		/* Don't allow PCIRST# to reset USB */
+		if (LEqual(Arg0,3)){
+			Store(0,URRE)
+		}
+
+		/* Clear sleep SMI status flag and enable sleep SMI trap. */
+		/*Store(One, CSSM)
+		Store(One, SSEN)*/
+
+		/* On older chips, clear PciExpWakeDisEn */
+		/*if (LLessEqual(\_SB.SBRI, 0x13)) {
+		*    	Store(0,\_SB.PWDE)
+		*}
+		*/
+
+		/* Clear wake status structure. */
+		Store(0, Index(WKST,0))
+		Store(0, Index(WKST,1))
+		\_SB.PCI0.SIOS (Arg0)
+	} /* End Method(\_PTS) */
+
+	/*
+	*  The following method results in a "not a valid reserved NameSeg"
+	*  warning so I have commented it out for the duration.  It isn't
+	*  used, so it could be removed.
+	*
+	*
+	*  	\_GTS OEM Going To Sleep method
+	*
+	*  	Entry:
+	*  		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*  	Exit:
+	*  		-none-
+	*
+	*  Method(\_GTS, 1) {
+	*  DBGO("\\_GTS\n")
+	*  DBGO("From S0 to S")
+	*  DBGO(Arg0)
+	*  DBGO("\n")
+	*  }
+	*/
+
+	/*
+	*	\_BFS OEM Back From Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		-none-
+	*/
+	Method(\_BFS, 1) {
+		/* DBGO("\\_BFS\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+	}
+
+	/*
+	*  \_WAK System Wake method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		Return package of 2 DWords
+	*		Dword 1 - Status
+	*			0x00000000	wake succeeded
+	*			0x00000001	Wake was signaled but failed due to lack of power
+	*			0x00000002	Wake was signaled but failed due to thermal condition
+	*		Dword 2 - Power Supply state
+	*			if non-zero the effective S-state the power supply entered
+	*/
+	Method(\_WAK, 1) {
+		/* DBGO("\\_WAK\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+
+		/* Re-enable HPET */
+		Store(1,HPDE)
+
+		/* Restore PCIRST# so it resets USB */
+		if (LEqual(Arg0,3)){
+			Store(1,URRE)
+		}
+
+		/* Arbitrarily clear PciExpWakeStatus */
+		Store(PWST, PWST)
+
+		/* if(DeRefOf(Index(WKST,0))) {
+		*	Store(0, Index(WKST,1))
+		* } else {
+		*	Store(Arg0, Index(WKST,1))
+		* }
+		*/
+		\_SB.PCI0.SIOW (Arg0)
+		Return(WKST)
+	} /* End Method(\_WAK) */
+
+	Scope(\_GPE) {	/* Start Scope GPE */
+		/*  General event 0  */
+		Method(_L00) {
+		      //DBGO("\\_GPE\\_L00\n")
+		}
+
+		/*  General event 1  */
+		Method(_L01) {
+		      //DBGO("\\_GPE\\_L01\n")
+		}
+
+		/*  General event 2  */
+		Method(_L02) {
+		      //DBGO("\\_GPE\\_L02\n")
+		}
+
+		/*  General event 3  */
+		Method(_L03) {
+			//DBGO("\\_GPE\\_L00\n")
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  General event 4  */
+		Method(_L04) {
+		      //DBGO("\\_GPE\\_L04\n")
+		}
+
+		/*  General event 5  */
+		Method(_L05) {
+		      //DBGO("\\_GPE\\_L05\n")
+		}
+
+		/* _L06 General event 6 - Used for GPM6, moved to USB.asl */
+		/* _L07 General event 7 - Used for GPM7, moved to USB.asl */
+
+		/*  Legacy PM event  */
+		Method(_L08) {
+			//DBGO("\\_GPE\\_L08\n")
+		}
+
+		/*  Temp warning (TWarn) event  */
+		Method(_L09) {
+			//DBGO("\\_GPE\\_L09\n")
+			Notify (\_TZ.TZ00, 0x80)
+		}
+
+		/*  Reserved  */
+		Method(_L0A) {
+		      //DBGO("\\_GPE\\_L0A\n")
+		}
+
+		/*  USB controller PME#  */
+		Method(_L0B) {
+			//DBGO("\\_GPE\\_L0B\n")
+			Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  AC97 controller PME#  */
+		Method(_L0C) {
+		      //DBGO("\\_GPE\\_L0C\n")
+		}
+
+		/*  OtherTherm PME#  */
+		Method(_L0D) {
+		      //DBGO("\\_GPE\\_L0D\n")
+		}
+
+		/* _L0E GPM9 SCI event - Moved to USB.asl */
+
+		/*  PCIe HotPlug event  */
+		Method(_L0F) {
+			//DBGO("\\_GPE\\_L0F\n")
+		}
+
+		/*  ExtEvent0 SCI event  */
+		Method(_L10) {
+			//DBGO("\\_GPE\\_L10\n")
+		}
+
+
+		/*  ExtEvent1 SCI event  */
+		Method(_L11) {
+			//DBGO("\\_GPE\\_L11\n")
+		}
+
+		/*  PCIe PME# event  */
+		Method(_L12) {
+		      //DBGO("\\_GPE\\_L12\n")
+		}
+
+		/* _L13 GPM0 SCI event - Moved to USB.asl */
+		/* _L14 GPM1 SCI event - Moved to USB.asl */
+		/* _L15 GPM2 SCI event - Moved to USB.asl */
+		/* _L16 GPM3 SCI event - Moved to USB.asl */
+		/* _L17 GPM8 SCI event - Moved to USB.asl */
+
+		/*  GPIO0 or GEvent8 event  */
+		Method(_L18) {
+			//DBGO("\\_GPE\\_L18\n")
+			Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBRb, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBRc, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBRd, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/* _L19 GPM4 SCI event - Moved to USB.asl */
+		/* _L1A GPM5 SCI event - Moved to USB.asl */
+
+		/*  Azalia SCI event  */
+		Method(_L1B) {
+			//DBGO("\\_GPE\\_L1B\n")
+			Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  GPM6 SCI event - Reassigned to _L06 */
+		Method(_L1C) {
+		      //DBGO("\\_GPE\\_L1C\n")
+		}
+
+		/*  GPM7 SCI event - Reassigned to _L07 */
+		Method(_L1D) {
+		      //DBGO("\\_GPE\\_L1D\n")
+		}
+
+		/*  GPIO2 or GPIO66 SCI event  */
+		Method(_L1E) {
+			//DBGO("\\_GPE\\_L1E\n")
+		}
+
+		/* _L1F SATA SCI event - Moved to sata.asl */
+
+	} 	/* End Scope GPE */
+
+	#include "acpi/usb.asl"
+
+	/* System Bus */
+	Scope(\_SB) { /* Start \_SB scope */
+		#include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */
+
+		/*  _SB.PCI0 */
+		/* Note: Only need HID on Primary Bus */
+		Device(PCI0) {
+			External (TOM1) //assigned when update_ssdt()
+			External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */
+
+			Name(_HID, EISAID("PNP0A03"))
+			Name(_ADR, 0x00180000)	/* Dev# = BSP Dev#, Func# = 0 */
+			Method(_BBN, 0) { /* Bus number = 0 */
+				Return(0)
+			}
+			Method(_STA, 0) {
+				/* DBGO("\\_SB\\PCI0\\_STA\n") */
+				Return(0x0B)     /* Status is visible */
+			}
+
+			Method(_PRT,0) {
+				If(PMOD){ Return(APR0) }	/* APIC mode */
+				Return (PR0)			/* PIC Mode */
+			} /* end _PRT */
+
+			/* Describe the Northbridge devices */
+			Device(AMRT) {
+				Name(_ADR, 0x00000000)
+			} /* end AMRT */
+
+			/* The external GFX bridge */
+			Device(PBR2) {
+				Name(_ADR, 0x00020000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS2) }	/* APIC mode */
+					Return (PS2)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR2 */
+
+			/* Dev3 is also an external GFX bridge */
+
+			Device(PBR4) {
+				Name(_ADR, 0x00040000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS4) }	/* APIC mode */
+					Return (PS4)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR4 */
+
+			Device(PBRb) {
+				Name(_ADR, 0x000b0000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APSb) }	/* APIC mode */
+					Return (PSb)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBRb */
+
+			Device(PBRc) {
+				Name(_ADR, 0x000c0000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APSc) }	/* APIC mode */
+					Return (PSc)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBRc */
+
+			Device(PBRd) {
+				Name(_ADR, 0x000d0000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APSd) }	/* APIC mode */
+					Return (PSd)			/*  PIC Mode */
+				} /* end _PRT */
+			} /* end PBRd */
+
+			/* Describe the Southbridge devices */
+			Device(STCR) {
+				Name(_ADR, 0x00110000)
+				#include "acpi/sata.asl"
+			} /* end STCR */
+
+			Device(UOH1) {
+				Name(_ADR, 0x00130000)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH1 */
+
+			Device(UOH2) {
+				Name(_ADR, 0x00130001)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH2 */
+
+			Device(UOH3) {
+				Name(_ADR, 0x00130002)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH3 */
+
+			Device(UOH4) {
+				Name(_ADR, 0x00130003)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH4 */
+
+			Device(UOH5) {
+				Name(_ADR, 0x00130004)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH5 */
+
+			Device(UEH1) {
+				Name(_ADR, 0x00130005)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UEH1 */
+
+			Device(SBUS) {
+				Name(_ADR, 0x00140000)
+			} /* end SBUS */
+
+			/* Primary (and only) IDE channel */
+			Device(IDEC) {
+				Name(_ADR, 0x00140001)
+				#include "acpi/ide.asl"
+			} /* end IDEC */
+
+			Device(AZHD) {
+				Name(_ADR, 0x00140002)
+				OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
+					Field(AZPD, AnyAcc, NoLock, Preserve) {
+					offset (0x42),
+					NSDI, 1,
+					NSDO, 1,
+					NSEN, 1,
+					offset (0x44),
+					IPCR, 4,
+					offset (0x54),
+					PWST, 2,
+					, 6,
+					PMEB, 1,
+					, 6,
+					PMST, 1,
+					offset (0x62),
+					MMCR, 1,
+					offset (0x64),
+					MMLA, 32,
+					offset (0x68),
+					MMHA, 32,
+					offset (0x6C),
+					MMDT, 16,
+				}
+
+				Method(_INI) {
+					If(LEqual(OSTP,3)){   /* If we are running Linux */
+						Store(zero, NSEN)
+						Store(one, NSDO)
+						Store(one, NSDI)
+					}
+				}
+			} /* end AZHD */
+
+			Device(LIBR) {
+				Name(_ADR, 0x00140003)
+				/* Method(_INI) {
+				*	DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
+				} */ /* End Method(_SB.SBRDG._INI) */
+
+				/* Real Time Clock Device */
+				Device(RTC0) {
+					Name(_HID, EISAID("PNP0B00"))	/* AT Real Time Clock (not PIIX4 compatible) */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){8}
+						IO(Decode16,0x0070, 0x0070, 0, 2)
+						/* IO(Decode16,0x0070, 0x0070, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
+
+				Device(TMR) {	/* Timer */
+					Name(_HID,EISAID("PNP0100"))	/* System Timer */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){0}
+						IO(Decode16, 0x0040, 0x0040, 0, 4)
+						/* IO(Decode16, 0x0048, 0x0048, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
+
+				Device(SPKR) {	/* Speaker */
+					Name(_HID,EISAID("PNP0800"))	/* AT style speaker */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x0061, 0x0061, 0, 1)
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
+
+				Device(PIC) {
+					Name(_HID,EISAID("PNP0000"))	/* AT Interrupt Controller */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){2}
+						IO(Decode16,0x0020, 0x0020, 0, 2)
+						IO(Decode16,0x00A0, 0x00A0, 0, 2)
+						/* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
+						/* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
+
+				Device(MAD) { /* 8257 DMA */
+					Name(_HID,EISAID("PNP0200"))	/* Hardware Device ID */
+					Name(_CRS, ResourceTemplate() {
+						DMA(Compatibility,BusMaster,Transfer8){4}
+						IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
+						IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
+						IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
+						IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
+						IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
+						IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
+					}) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
+				} /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
+
+				Device(COPR) {
+					Name(_HID,EISAID("PNP0C04"))	/* Math Coprocessor */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
+						IRQNoFlags(){13}
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+
+				Device (PS2M) {
+					Name (_HID, EisaId ("PNP0F13"))
+					Name (_CRS, ResourceTemplate () {
+						IO (Decode16, 0x0060, 0x0060, 0x00, 0x01)
+						IO (Decode16, 0x0064, 0x0064, 0x00, 0x01)
+						IRQNoFlags () {12}
+					})
+					Method (_STA, 0, NotSerialized) {
+						And (FLG0, 0x04, Local0)
+						If (LEqual (Local0, 0x04)) {
+							Return (0x0F)
+						} Else {
+							Return (0x00)
+						}
+					}
+				}
+
+				Device (PS2K) {
+					Name (_HID, EisaId ("PNP0303"))
+					Method (_STA, 0, NotSerialized) {
+						And (FLG0, 0x04, Local0)
+						If (LEqual (Local0, 0x04)) {
+							Return (0x0F)
+						} Else {
+							Return (0x00)
+						}
+					}
+					Name (_CRS, ResourceTemplate () {
+						IO (Decode16, 0x0060, 0x0060, 0x00, 0x01)
+						IO (Decode16, 0x0064, 0x0064, 0x00, 0x01)
+						IRQNoFlags () {1}
+					})
+				}
+
+#if 0 //acpi_create_hpet
+				Device(HPET) {
+					Name(_HID,EISAID("PNP0103"))
+					Name(CRS, ResourceTemplate() {
+		    				IRQNoFlags () {0}
+		    				IRQNoFlags () {2}
+		   			 	IRQNoFlags () {8}
+						Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, MNT)	/* 1kb reserved space */
+					})
+					Method(_STA, 0, NotSerialized) {
+						Return(0x0F) /* sata is visible */
+					}
+					Method(_CRS, 0, NotSerialized) {
+						CreateDwordField(CRS, ^MNT._BAS, HPT)
+						Store(HPBA, HPT)
+						Return(CRS)
+					}
+				} /* End Device(_SB.PCI0.LIBR.HPET) */
+#endif
+			} /* end LIBR */
+
+			Device(HPBR) {
+				Name(_ADR, 0x00140004)
+			} /* end HostPciBr */
+
+			Device(ACAD) {
+				Name(_ADR, 0x00140005)
+			} /* end Ac97audio */
+
+			Device(ACMD) {
+				Name(_ADR, 0x00140006)
+			} /* end Ac97modem */
+
+			/* ITE8718 Support */
+			OperationRegion (IOID, SystemIO, 0x2E, 0x02)	/* sometimes it is 0x4E */
+				Field (IOID, ByteAcc, NoLock, Preserve)
+				{
+					SIOI,   8,    SIOD,   8		/* 0x2E and 0x2F */
+				}
+
+			IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve)
+			{
+					Offset (0x07),
+				LDN,	8,	/* Logical Device Number */
+					Offset (0x20),
+				CID1,	8,	/* Chip ID Byte 1, 0x87 */
+				CID2,	8,	/* Chip ID Byte 2, 0x12 */
+					Offset (0x30),
+				ACTR,	8,	/* Function activate */
+					Offset (0xF0),
+				APC0,	8,	/* APC/PME Event Enable Register */
+				APC1,	8,	/* APC/PME Status Register */
+				APC2,	8,	/* APC/PME Control Register 1 */
+				APC3,	8,	/* Environment Controller Special Configuration Register */
+				APC4,	8	/* APC/PME Control Register 2 */
+			}
+
+			/* Enter the 8718 MB PnP Mode */
+			Method (EPNP)
+			{
+				Store(0x87, SIOI)
+				Store(0x01, SIOI)
+				Store(0x55, SIOI)
+				Store(0x55, SIOI) /* 8718 magic number */
+			}
+			/* Exit the 8718 MB PnP Mode */
+			Method (XPNP)
+			{
+				Store (0x02, SIOI)
+				Store (0x02, SIOD)
+			}
+			/*
+			 * Keyboard PME is routed to SB700 Gevent3. We can wake
+			 * up the system by pressing the key.
+			 */
+			Method (SIOS, 1)
+			{
+				/* We only enable KBD PME for S5. */
+				If (LLess (Arg0, 0x05))
+				{
+					EPNP()
+					/* DBGO("8718F\n") */
+
+					Store (0x4, LDN)
+					Store (One, ACTR)  /* Enable EC */
+					/*
+					Store (0x4, LDN)
+					Store (0x04, APC4)
+					*/  /* falling edge. which mode? Not sure. */
+
+					Store (0x4, LDN)
+					Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */
+					Store (0x4, LDN)
+					Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */
+
+					XPNP()
+				}
+			}
+			Method (SIOW, 1)
+			{
+				EPNP()
+				Store (0x4, LDN)
+				Store (Zero, APC0) /* disable keyboard PME */
+				Store (0x4, LDN)
+				Store (0xFF, APC1) /* clear keyboard PME status */
+				XPNP()
+			}
+
+			Name (CRS, ResourceTemplate ()
+			{
+				WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+					0x0000,             // Granularity
+					0x0000,             // Range Minimum
+					0x00FF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x0100,             // Length
+					,,)
+				IO (Decode16,
+					0x0CF8,             // Range Minimum
+					0x0CF8,             // Range Maximum
+					0x01,               // Alignment
+					0x08,               // Length
+					)
+
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x0000,             // Range Minimum
+					0x03AF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x03B0,             // Length
+					,, , TypeStatic)
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x03E0,             // Range Minimum
+					0x0CF7,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x0918,             // Length
+					,, , TypeStatic)
+
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x03B0,             // Range Minimum
+					0x03BB,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x000C,             // Length
+					,, , TypeStatic)
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x03C0,             // Range Minimum
+					0x03DF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x0020,             // Length
+					,, , TypeStatic)
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x0D00,             // Range Minimum
+					0xFFFF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0xF300,             // Length
+					,, , TypeStatic)
+				Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) 	// VGA memory space
+
+				Memory32Fixed (ReadOnly,
+						0xE0000000,         // Address Base
+						0x10000000,         // Address Length, (1MB each Bus, 256 Buses by default)
+						MMIO)
+			})
+
+			Method (_CRS, 0, NotSerialized)
+			{
+				CreateDWordField (CRS, \_SB.PCI0.MMIO._BAS, BAS1)
+				CreateDWordField (CRS, \_SB.PCI0.MMIO._LEN, LEN1)
+
+                                /*
+                                 * Declare memory between TOM1 and 4GB as available
+                                 * for PCI MMIO.
+                                 * Use ShiftLeft to avoid 64bit constant (for XP).
+                                 * This will work even if the OS does 32bit arithmetic, as
+                                 * 32bit (0x00000000 - TOM1) will wrap and give the same
+                                 * result as 64bit (0x100000000 - TOM1).
+                                 */
+				Store(TOM1, BAS1)
+                                ShiftLeft(0x10000000, 4, Local0)
+                                Subtract(Local0, TOM1, Local0)
+                                Store(Local0, LEN1)
+				//DBGO(TOM1)
+
+				Return (CRS)
+			}
+
+			/*
+			 *
+			 *               FIRST METHOD CALLED UPON BOOT
+			 *
+			 *  1. If debugging, print current OS and ACPI interpreter.
+			 *  2. Get PCI Interrupt routing from ACPI VSM, this
+			 *     value is based on user choice in BIOS setup.
+			 */
+			Method(_INI, 0) {
+				/* DBGO("\\_SB\\_INI\n") */
+				/* DBGO("   DSDT.ASL code from ") */
+				/* DBGO(__DATE__) */
+				/* DBGO(" ") */
+				/* DBGO(__TIME__) */
+				/* DBGO("\n   Sleep states supported: ") */
+				/* DBGO("\n") */
+				/* DBGO("   \\_OS=") */
+				/* DBGO(\_OS) */
+				/* DBGO("\n   \\_REV=") */
+				/* DBGO(\_REV) */
+				/* DBGO("\n") */
+
+				/* Determine the OS we're running on */
+				CkOT()
+				/* On older chips, clear PciExpWakeDisEn */
+				/*if (LLessEqual(\SBRI, 0x13)) {
+				 *    	Store(0,\PWDE)
+				 *}
+				 */
+			} /* End Method(_SB._INI) */
+		} /* End Device(PCI0)  */
+
+		Device(PWRB) {	/* Start Power button device */
+			Name(_HID, EISAID("PNP0C0C"))
+			Name(_UID, 0xAA)
+			Name(_PRW, Package () {3, 0x04})	/* wake from S1-S4 */
+			Name(_STA, 0x0B) /* sata is invisible */
+		}
+	} /* End \_SB scope */
+
+	Scope(\_SI) {
+		Method(_SST, 1) {
+			/* DBGO("\\_SI\\_SST\n") */
+			/* DBGO("   New Indicator state: ") */
+			/* DBGO(Arg0) */
+			/* DBGO("\n") */
+		}
+	} /* End Scope SI */
+
+	/* SMBUS Support */
+	Mutex (SBX0, 0x00)
+	OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
+		Field (SMB0, ByteAcc, NoLock, Preserve) {
+			HSTS,   8, /* SMBUS status */
+			SSTS,   8,  /* SMBUS slave status */
+			HCNT,   8,  /* SMBUS control */
+			HCMD,   8,  /* SMBUS host cmd */
+			HADD,   8,  /* SMBUS address */
+			DAT0,   8,  /* SMBUS data0 */
+			DAT1,   8,  /* SMBUS data1 */
+			BLKD,   8,  /* SMBUS block data */
+			SCNT,   8,  /* SMBUS slave control */
+			SCMD,   8,  /* SMBUS shaow cmd */
+			SEVT,   8,  /* SMBUS slave event */
+			SDAT,   8  /* SMBUS slave data */
+	}
+
+	Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
+		Store (0x1E, HSTS)
+		Store (0xFA, Local0)
+		While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
+			Stall (0x64)
+			Decrement (Local0)
+		}
+
+		Return (Local0)
+	}
+
+	Method (SWTC, 1, NotSerialized) {
+		Store (Arg0, Local0)
+		Store (0x07, Local2)
+		Store (One, Local1)
+		While (LEqual (Local1, One)) {
+			Store (And (HSTS, 0x1E), Local3)
+			If (LNotEqual (Local3, Zero)) { /* read sucess */
+				If (LEqual (Local3, 0x02)) {
+					Store (Zero, Local2)
+				}
+
+				Store (Zero, Local1)
+			}
+			Else {
+				If (LLess (Local0, 0x0A)) { /* read failure */
+					Store (0x10, Local2)
+					Store (Zero, Local1)
+				}
+				Else {
+					Sleep (0x0A) /* 10 ms, try again */
+					Subtract (Local0, 0x0A, Local0)
+				}
+			}
+		}
+
+		Return (Local2)
+	}
+
+	Method (SMBR, 3, NotSerialized) {
+		Store (0x07, Local0)
+		If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
+			Store (WCLR (), Local0) /* clear SMBUS status register before read data */
+			If (LEqual (Local0, Zero)) {
+				Release (SBX0)
+				Return (0x0)
+			}
+
+			Store (0x1F, HSTS)
+			Store (Or (ShiftLeft (Arg1, One), One), HADD)
+			Store (Arg2, HCMD)
+			If (LEqual (Arg0, 0x07)) {
+				Store (0x48, HCNT) /* read byte */
+			}
+
+			Store (SWTC (0x03E8), Local1) /* 1000 ms */
+			If (LEqual (Local1, Zero)) {
+				If (LEqual (Arg0, 0x07)) {
+					Store (DAT0, Local0)
+				}
+			}
+			Else {
+				Store (Local1, Local0)
+			}
+
+			Release (SBX0)
+		}
+
+		/* DBGO("the value of SMBusData0 register ") */
+		/* DBGO(Arg2) */
+		/* DBGO(" is ") */
+		/* DBGO(Local0) */
+		/* DBGO("\n") */
+
+		Return (Local0)
+	}
+
+	/* THERMAL */
+	Scope(\_TZ) {
+		Name (KELV, 2732)
+		Name (THOT, 800)
+		Name (TCRT, 850)
+
+		ThermalZone(TZ00) {
+			Method(_AC0,0) {	/* Active Cooling 0 (0=highest fan speed) */
+				/* DBGO("\\_TZ\\TZ00\\_AC0\n") */
+				Return(Add(0, 2730))
+			}
+			Method(_AL0,0) {	/* Returns package of cooling device to turn on */
+				/* DBGO("\\_TZ\\TZ00\\_AL0\n") */
+				Return(Package() {\_TZ.TZ00.FAN0})
+			}
+			Device (FAN0) {
+				Name(_HID, EISAID("PNP0C0B"))
+				Name(_PR0, Package() {PFN0})
+			}
+
+			PowerResource(PFN0,0,0) {
+				Method(_STA) {
+					Store(0xF,Local0)
+					Return(Local0)
+				}
+				Method(_ON) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
+				}
+				Method(_OFF) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
+				}
+			}
+
+			Method(_HOT,0) {	/* return hot temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_HOT\n") */
+				Return (Add (THOT, KELV))
+			}
+			Method(_CRT,0) {	/* return critical temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_CRT\n") */
+				Return (Add (TCRT, KELV))
+			}
+			Method(_TMP,0) {	/* return current temp of this zone */
+				Store (SMBR (0x07, 0x4C,, 0x00), Local0)
+				If (LGreater (Local0, 0x10)) {
+					Store (Local0, Local1)
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400, KELV))
+				}
+
+				Store (SMBR (0x07, 0x4C, 0x01), Local0)
+				/* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
+				/* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
+				If (LGreater (Local0, 0x10)) {
+					If (LGreater (Local0, Local1)) {
+						Store (Local0, Local1)
+					}
+
+					Multiply (Local1, 10, Local1)
+					Return (Add (Local1, KELV))
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400 , KELV))
+				}
+			} /* end of _TMP */
+		} /* end of TZ00 */
+	}
+}
+/* End of ASL file */
diff --git a/src/mainboard/tyan/s8226/dsdt.asl.ami b/src/mainboard/tyan/s8226/dsdt.asl.ami
new file mode 100644
index 0000000..bc26ff1
--- /dev/null
+++ b/src/mainboard/tyan/s8226/dsdt.asl.ami
@@ -0,0 +1,7818 @@
+/*
+ * Intel ACPI Component Architecture
+ * AML Disassembler version 20120816-64 [Aug 27 2012]
+ * Copyright (c) 2000 - 2012 Intel Corporation
+ * 
+ * Disassembly of dsdt.dat, Wed Sep  5 22:06:53 2012
+ *
+ * Original Table Header:
+ *     Signature        "DSDT"
+ *     Length           0x000061A2 (24994)
+ *     Revision         0x02
+ *     Checksum         0x17
+ *     OEM ID           "8226_"
+ *     OEM Table ID     "8226_001"
+ *     OEM Revision     0x00000001 (1)
+ *     Compiler ID      "INTL"
+ *     Compiler Version 0x20051117 (537202967)
+ */
+
+DefinitionBlock ("dsdt.aml", "DSDT", 2, "8226_", "8226_001", 0x00000001)
+{
+    Name (OSTY, Ones)
+    OperationRegion (ACMS, SystemIO, 0x72, 0x02)
+    Field (ACMS, ByteAcc, NoLock, Preserve)
+    {
+        ICMS,   8, 
+        DCMS,   8
+    }
+
+    IndexField (ICMS, DCMS, ByteAcc, NoLock, Preserve)
+    {
+        Offset (0x01), 
+        Offset (0x04), 
+        Offset (0x08), 
+        BS_A,   32
+    }
+
+    OperationRegion (CFGS, SystemMemory, BS_A, 0x80)
+    Field (CFGS, AnyAcc, NoLock, Preserve)
+    {
+        Offset (0x04), 
+        PCIE,   32, 
+        Offset (0x3D), 
+        TPMR,   1, 
+        STHP,   1, 
+        SHPG,   1, 
+        OSCF,   1
+    }
+
+    OperationRegion (CMPT, SystemIO, 0x0C50, 0x03)
+    Field (CMPT, ByteAcc, NoLock, Preserve)
+    {
+        CMID,   8, 
+            ,   6, 
+        GPCT,   2, 
+        GP0I,   1, 
+        GP1I,   1, 
+        GP2I,   1, 
+        GP3I,   1, 
+        GP4I,   1, 
+        GP5I,   1, 
+        GP6I,   1, 
+        GP7I,   1
+    }
+
+    OperationRegion (PCFG, SystemMemory, PCIE, 0x02000000)
+    Field (PCFG, AnyAcc, NoLock, Preserve)
+    {
+        Offset (0x38078), 
+        Offset (0x3807A), 
+        PMS7,   1, 
+        Offset (0x50078), 
+        Offset (0x5007A), 
+        PMSA,   1, 
+        Offset (0x8800A), 
+        STCL,   16, 
+        Offset (0xA0004), 
+        SMIE,   1, 
+        SMME,   1, 
+        Offset (0xA0008), 
+        RVID,   8, 
+        Offset (0xA0014), 
+        SMB1,   32, 
+        Offset (0xA0050), 
+            ,   10, 
+        GP51,   1, 
+        Offset (0xA0056), 
+            ,   11, 
+        GP64,   1, 
+        Offset (0xA0082), 
+            ,   2, 
+        G31O,   1, 
+        Offset (0xA0090), 
+        SM00,   16, 
+        Offset (0xA00BA), 
+            ,   4, 
+        ESMP,   1, 
+        Offset (0xA00BB), 
+            ,   1, 
+        HSMP,   1, 
+        Offset (0xA00E1), 
+            ,   6, 
+        ACIR,   1, 
+        Offset (0xA4004), 
+        PCMD,   2
+    }
+
+    OperationRegion (PMIO, SystemIO, 0x0CD6, 0x02)
+    Field (PMIO, ByteAcc, NoLock, Preserve)
+    {
+        INPM,   8, 
+        DAPM,   8
+    }
+
+    IndexField (INPM, DAPM, ByteAcc, NoLock, Preserve)
+    {
+            ,   1, 
+        TM1E,   1, 
+        TM2E,   1, 
+        Offset (0x01), 
+            ,   1, 
+        TM1S,   1, 
+        TM2S,   1, 
+        Offset (0x04), 
+            ,   7, 
+        SLPS,   1, 
+        Offset (0x07), 
+            ,   7, 
+        CLPS,   1, 
+        Offset (0x0D), 
+        EV0S,   1, 
+        EV1S,   1, 
+        Offset (0x10), 
+            ,   6, 
+        PWDE,   1, 
+        Offset (0x1C), 
+            ,   3, 
+        MKME,   1, 
+        PI3E,   1, 
+        PI2E,   1, 
+        PI1E,   1, 
+        PI0E,   1, 
+            ,   3, 
+        MKMS,   1, 
+        PI3S,   1, 
+        PI2S,   1, 
+        PI1S,   1, 
+        PI0S,   1, 
+        Offset (0x20), 
+        P1EB,   16, 
+        Offset (0x36), 
+            ,   6, 
+        GV6P,   1, 
+        GV7P,   1, 
+        EV0C,   1, 
+        EV1C,   1, 
+            ,   1, 
+        GM0P,   1, 
+        GM1P,   1, 
+        GM2P,   1, 
+        GM3P,   1, 
+        GM8P,   1, 
+            ,   1, 
+        GM4P,   1, 
+        GM5P,   1, 
+            ,   1, 
+        GM6P,   1, 
+        GM7P,   1, 
+        Offset (0x3B), 
+        GPX0,   1, 
+        GPX4,   1, 
+        GPX5,   1, 
+        GPX1,   1, 
+        GPX6,   1, 
+        GPX7,   1, 
+        GPX2,   1, 
+        GPX3,   1, 
+        Offset (0x55), 
+        SPRE,   1, 
+            ,   1, 
+            ,   1, 
+        EPNM,   1, 
+        DPPF,   1, 
+        FNGS,   1, 
+        Offset (0x61), 
+            ,   7, 
+        R617,   1, 
+        Offset (0x65), 
+            ,   4, 
+        RSTU,   1, 
+        Offset (0x68), 
+            ,   3, 
+        TPDE,   1, 
+            ,   1, 
+        Offset (0x7C), 
+            ,   2, 
+        BLNK,   2, 
+        Offset (0x84), 
+        WPNE,   1, 
+        WPAG,   1, 
+        Offset (0x92), 
+            ,   7, 
+        GV7S,   1, 
+        Offset (0x96), 
+        GP8I,   1, 
+        GP9I,   1, 
+        Offset (0x9A), 
+            ,   7, 
+        HECO,   1, 
+        Offset (0xA8), 
+        PI4E,   1, 
+        PI5E,   1, 
+        PI6E,   1, 
+        PI7E,   1, 
+        Offset (0xA9), 
+        PI4S,   1, 
+        PI5S,   1, 
+        PI6S,   1, 
+        PI7S,   1
+    }
+
+    OperationRegion (P1E0, SystemIO, P1EB, 0x04)
+    Field (P1E0, ByteAcc, NoLock, Preserve)
+    {
+            ,   14, 
+        PEWS,   1, 
+        WSTA,   1, 
+            ,   14, 
+        PEWD,   1
+    }
+
+    Method (SPTS, 1, NotSerialized)
+    {
+        If (LEqual (Arg0, 0x03))
+        {
+            Store (Zero, RSTU)
+        }
+
+        If (LEqual (Arg0, One))
+        {
+            Store (0x02, BLNK)
+        }
+
+        If (LEqual (Arg0, 0x02))
+        {
+            Store (Zero, BLNK)
+        }
+
+        If (LEqual (Arg0, 0x03))
+        {
+            Store (One, BLNK)
+        }
+
+        Store (One, CLPS)
+        Store (One, SLPS)
+        If (LLessEqual (RVID, 0x13))
+        {
+            Store (Zero, PWDE)
+        }
+    }
+
+    Method (SWAK, 1, NotSerialized)
+    {
+        Store (One, HECO)
+        If (LEqual (Arg0, 0x03))
+        {
+            Store (One, RSTU)
+        }
+
+        Store (PEWS, PEWS)
+        Store (One, PMS7)
+        Store (One, PMSA)
+    }
+
+    Method (TRMD, 1, NotSerialized)
+    {
+        Store (Arg0, SPRE)
+        Store (Arg0, TPDE)
+    }
+
+    Name (DP80, 0x80)
+    Name (DP90, 0x90)
+    Name (WKTP, Zero)
+    Name (SPIO, 0x2E)
+    Name (IOSB, 0x0A00)
+    Name (IOSL, 0x10)
+    Name (IOHB, 0x0A10)
+    Name (IOHL, 0x10)
+    Name (APIC, One)
+    Name (MR64, Zero)
+    Name (PMBS, 0x0800)
+    Name (PMLN, 0xA0)
+    Name (GPBS, Zero)
+    Name (GPLN, Zero)
+    Name (SMB0, 0x0B00)
+    Name (SMBB, 0x0B20)
+    Name (SMBM, 0x10)
+    Name (SMBL, 0x20)
+    Name (PCIB, 0xE0000000)
+    Name (PCIL, 0x10000000)
+    Name (PEHP, One)
+    Name (SHPC, Zero)
+    Name (PEPM, One)
+    Name (PEER, One)
+    Name (PECS, One)
+    OperationRegion (BIOS, SystemMemory, 0xDFDC2064, 0xFF)
+    Field (BIOS, ByteAcc, NoLock, Preserve)
+    {
+        SS1,    1, 
+        SS2,    1, 
+        SS3,    1, 
+        SS4,    1, 
+        Offset (0x01), 
+        IOST,   16, 
+        TOPM,   32, 
+        ROMS,   32, 
+        MG1B,   32, 
+        MG1L,   32, 
+        MG2B,   32, 
+        MG2L,   32, 
+        Offset (0x1C), 
+        DMAX,   8, 
+        HPTA,   32, 
+        CPB0,   32, 
+        CPB1,   32, 
+        CPB2,   32, 
+        CPB3,   32, 
+        ASSB,   8, 
+        AOTB,   8, 
+        AAXB,   32, 
+        SMIF,   8, 
+        DTSE,   8, 
+        DTS1,   8, 
+        DTS2,   8, 
+        MPEN,   8, 
+        TPMF,   8, 
+        MG3B,   32, 
+        MG3L,   32, 
+        MH1B,   32, 
+        MH1L,   32, 
+        OSTP,   8, 
+        M4BL,   32, 
+        M4BH,   32, 
+        M4LL,   32, 
+        M4LH,   32, 
+        VGAR,   8, 
+        SEB0,   8, 
+        SUB0,   8, 
+        SEB1,   8, 
+        SUB1,   8, 
+        SEB2,   8, 
+        SUB2,   8, 
+        SEB3,   8, 
+        SUB3,   8, 
+        IOB0,   16, 
+        IOL0,   16, 
+        IOB1,   16, 
+        IOL1,   16, 
+        IOB2,   16, 
+        IOL2,   16, 
+        IOB3,   16, 
+        IOL3,   16, 
+        GP4S,   32, 
+        GP4L,   32, 
+        GP5S,   32, 
+        GP5L,   32, 
+        GP6S,   32, 
+        GP6L,   32, 
+        GP7S,   32, 
+        GP7L,   32, 
+        GP8S,   32, 
+        GP8L,   32, 
+        GP9S,   32, 
+        GP9L,   32
+    }
+
+    Method (RRIO, 4, NotSerialized)
+    {
+        Store ("RRIO", Debug)
+    }
+
+    Method (RDMA, 3, NotSerialized)
+    {
+        Store ("rDMA", Debug)
+    }
+
+    Name (PICM, Zero)
+    Method (_PIC, 1, NotSerialized)  // _PIC: Interrupt Model
+    {
+        If (Arg0)
+        {
+            Store (0xAA, DBG8)
+        }
+        Else
+        {
+            Store (0xAC, DBG8)
+        }
+
+        Store (Arg0, PICM)
+    }
+
+    Name (OSVR, Ones)
+    Method (OSFL, 0, NotSerialized)
+    {
+        If (LNotEqual (OSVR, Ones))
+        {
+            Return (OSVR)
+        }
+
+        Name (TTT0, Zero)
+        Store (OSYS (), TTT0)
+        If (LEqual (TTT0, One))
+        {
+            Store (0x03, OSVR)
+        }
+        Else
+        {
+            If (LEqual (TTT0, 0x10))
+            {
+                Store (One, OSVR)
+            }
+            Else
+            {
+                If (LEqual (TTT0, 0x11))
+                {
+                    Store (0x02, OSVR)
+                }
+                Else
+                {
+                    If (LEqual (TTT0, 0x12))
+                    {
+                        Store (0x04, OSVR)
+                    }
+                    Else
+                    {
+                        If (LEqual (TTT0, 0x13))
+                        {
+                            Store (Zero, OSVR)
+                        }
+                        Else
+                        {
+                            If (LEqual (TTT0, 0x14))
+                            {
+                                Store (Zero, OSVR)
+                            }
+                            Else
+                            {
+                                If (LEqual (TTT0, 0x15))
+                                {
+                                    Store (Zero, OSVR)
+                                }
+                                Else
+                                {
+                                    If (LEqual (TTT0, 0x16))
+                                    {
+                                        Store (Zero, OSVR)
+                                    }
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+        }
+
+        Return (OSVR)
+    }
+
+    Method (MCTH, 2, NotSerialized)
+    {
+        If (LLess (SizeOf (Arg0), SizeOf (Arg1)))
+        {
+            Return (Zero)
+        }
+
+        Add (SizeOf (Arg0), One, Local0)
+        Name (BUF0, Buffer (Local0) {})
+        Name (BUF1, Buffer (Local0) {})
+        Store (Arg0, BUF0)
+        Store (Arg1, BUF1)
+        While (Local0)
+        {
+            Decrement (Local0)
+            If (LNotEqual (DerefOf (Index (BUF0, Local0)), DerefOf (Index (
+                BUF1, Local0))))
+            {
+                Return (Zero)
+            }
+        }
+
+        Return (One)
+    }
+
+    Name (PRWP, Package (0x02)
+    {
+        Zero, 
+        Zero
+    })
+    Method (GPRW, 2, NotSerialized)
+    {
+        Store (Arg0, Index (PRWP, Zero))
+        Store (ShiftLeft (SS1, One), Local0)
+        Or (Local0, ShiftLeft (SS2, 0x02), Local0)
+        Or (Local0, ShiftLeft (SS3, 0x03), Local0)
+        Or (Local0, ShiftLeft (SS4, 0x04), Local0)
+        If (And (ShiftLeft (One, Arg1), Local0))
+        {
+            Store (Arg1, Index (PRWP, One))
+        }
+        Else
+        {
+            ShiftRight (Local0, One, Local0)
+            If (LOr (LEqual (OSFL (), One), LEqual (OSFL (), 0x02)))
+            {
+                FindSetLeftBit (Local0, Index (PRWP, One))
+            }
+            Else
+            {
+                FindSetRightBit (Local0, Index (PRWP, One))
+            }
+        }
+
+        Return (PRWP)
+    }
+
+    Name (WAKP, Package (0x02)
+    {
+        Zero, 
+        Zero
+    })
+    OperationRegion (DEB0, SystemIO, DP80, One)
+    Field (DEB0, ByteAcc, NoLock, Preserve)
+    {
+        DBG8,   8
+    }
+
+    OperationRegion (DEB1, SystemIO, DP90, 0x02)
+    Field (DEB1, WordAcc, NoLock, Preserve)
+    {
+        DBG9,   16
+    }
+
+    Method (OSYS, 0, NotSerialized)
+    {
+        Store (0x10, Local0)
+        If (CondRefOf (_OSI, Local1))
+        {
+            If (_OSI ("Windows 2000"))
+            {
+                Store (0x12, Local0)
+            }
+
+            If (_OSI ("Windows 2001"))
+            {
+                Store (0x13, Local0)
+            }
+
+            If (_OSI ("Windows 2001 SP1"))
+            {
+                Store (0x13, Local0)
+            }
+
+            If (_OSI ("Windows 2001 SP2"))
+            {
+                Store (0x13, Local0)
+            }
+
+            If (_OSI ("Windows 2001.1"))
+            {
+                Store (0x14, Local0)
+            }
+
+            If (_OSI ("Windows 2001.1 SP1"))
+            {
+                Store (0x14, Local0)
+            }
+
+            If (_OSI ("Windows 2006"))
+            {
+                Store (0x15, Local0)
+            }
+
+            If (_OSI ("Windows 2006.1"))
+            {
+                Store (0x16, Local0)
+            }
+        }
+        Else
+        {
+            If (MCTH (_OS, "Microsoft Windows NT"))
+            {
+                Store (0x12, Local0)
+            }
+            Else
+            {
+                If (MCTH (_OS, "Microsoft WindowsME: Millennium Edition"))
+                {
+                    Store (0x11, Local0)
+                }
+            }
+        }
+
+        Return (Local0)
+    }
+
+    Scope (_PR)
+    {
+        Processor (P001, 0x01, 0x00000810, 0x06) {}
+        Processor (P002, 0x02, 0x00000000, 0x00) {}
+        Processor (P003, 0x03, 0x00000000, 0x00) {}
+        Processor (P004, 0x04, 0x00000000, 0x00) {}
+        Processor (P005, 0x05, 0x00000000, 0x00) {}
+        Processor (P006, 0x06, 0x00000000, 0x00) {}
+        Processor (P007, 0x07, 0x00000000, 0x00) {}
+        Processor (P008, 0x08, 0x00000000, 0x00) {}
+        Processor (P009, 0x09, 0x00000000, 0x00) {}
+        Processor (P00A, 0x0A, 0x00000000, 0x00) {}
+        Processor (P00B, 0x0B, 0x00000000, 0x00) {}
+        Processor (P00C, 0x0C, 0x00000000, 0x00) {}
+        Processor (P00D, 0x0D, 0x00000000, 0x00) {}
+        Processor (P00E, 0x0E, 0x00000000, 0x00) {}
+        Processor (P00F, 0x0F, 0x00000000, 0x00) {}
+        Processor (P010, 0x10, 0x00000000, 0x00) {}
+        Alias (P001, CPU1)
+        Alias (P002, CPU2)
+        Alias (P003, CPU3)
+        Alias (P004, CPU4)
+        Alias (P005, CPU5)
+        Alias (P006, CPU6)
+        Alias (P007, CPU7)
+        Alias (P008, CPU8)
+        Alias (P009, CPU9)
+    }
+
+    Scope (_SB)
+    {
+        Name (PR00, Package (0x19)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0002FFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0003FFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0004FFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0005FFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                Zero, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0007FFFF, 
+                Zero, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0009FFFF, 
+                Zero, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x000AFFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x000BFFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x000CFFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x000DFFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0014FFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0014FFFF, 
+                One, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0014FFFF, 
+                0x02, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0014FFFF, 
+                0x03, 
+                LNKD, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0012FFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0012FFFF, 
+                One, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0012FFFF, 
+                0x02, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0012FFFF, 
+                0x03, 
+                LNKD, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0013FFFF, 
+                Zero, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0013FFFF, 
+                One, 
+                LNKD, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0013FFFF, 
+                0x02, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0013FFFF, 
+                0x03, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0011FFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }
+        })
+        Name (AR00, Package (0x19)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x37
+            }, 
+
+            Package (0x04)
+            {
+                0x0002FFFF, 
+                Zero, 
+                Zero, 
+                0x34
+            }, 
+
+            Package (0x04)
+            {
+                0x0003FFFF, 
+                Zero, 
+                Zero, 
+                0x34
+            }, 
+
+            Package (0x04)
+            {
+                0x0004FFFF, 
+                Zero, 
+                Zero, 
+                0x34
+            }, 
+
+            Package (0x04)
+            {
+                0x0005FFFF, 
+                Zero, 
+                Zero, 
+                0x34
+            }, 
+
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                Zero, 
+                Zero, 
+                0x35
+            }, 
+
+            Package (0x04)
+            {
+                0x0007FFFF, 
+                Zero, 
+                Zero, 
+                0x35
+            }, 
+
+            Package (0x04)
+            {
+                0x0009FFFF, 
+                Zero, 
+                Zero, 
+                0x35
+            }, 
+
+            Package (0x04)
+            {
+                0x000AFFFF, 
+                Zero, 
+                Zero, 
+                0x36
+            }, 
+
+            Package (0x04)
+            {
+                0x000BFFFF, 
+                Zero, 
+                Zero, 
+                0x36
+            }, 
+
+            Package (0x04)
+            {
+                0x000CFFFF, 
+                Zero, 
+                Zero, 
+                0x36
+            }, 
+
+            Package (0x04)
+            {
+                0x000DFFFF, 
+                Zero, 
+                Zero, 
+                0x36
+            }, 
+
+            Package (0x04)
+            {
+                0x0014FFFF, 
+                Zero, 
+                Zero, 
+                0x10
+            }, 
+
+            Package (0x04)
+            {
+                0x0014FFFF, 
+                One, 
+                Zero, 
+                0x11
+            }, 
+
+            Package (0x04)
+            {
+                0x0014FFFF, 
+                0x02, 
+                Zero, 
+                0x12
+            }, 
+
+            Package (0x04)
+            {
+                0x0014FFFF, 
+                0x03, 
+                Zero, 
+                0x13
+            }, 
+
+            Package (0x04)
+            {
+                0x0012FFFF, 
+                Zero, 
+                Zero, 
+                0x10
+            }, 
+
+            Package (0x04)
+            {
+                0x0012FFFF, 
+                One, 
+                Zero, 
+                0x11
+            }, 
+
+            Package (0x04)
+            {
+                0x0012FFFF, 
+                0x02, 
+                Zero, 
+                0x12
+            }, 
+
+            Package (0x04)
+            {
+                0x0012FFFF, 
+                0x03, 
+                Zero, 
+                0x13
+            }, 
+
+            Package (0x04)
+            {
+                0x0013FFFF, 
+                Zero, 
+                Zero, 
+                0x12
+            }, 
+
+            Package (0x04)
+            {
+                0x0013FFFF, 
+                One, 
+                Zero, 
+                0x13
+            }, 
+
+            Package (0x04)
+            {
+                0x0013FFFF, 
+                0x02, 
+                Zero, 
+                0x10
+            }, 
+
+            Package (0x04)
+            {
+                0x0013FFFF, 
+                0x03, 
+                Zero, 
+                0x11
+            }, 
+
+            Package (0x04)
+            {
+                0x0011FFFF, 
+                Zero, 
+                Zero, 
+                0x16
+            }
+        })
+        Name (PR12, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKD, 
+                Zero
+            }
+        })
+        Name (AR12, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x18
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x19
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x1A
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x1B
+            }
+        })
+        Name (PR13, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKH, 
+                Zero
+            }
+        })
+        Name (AR13, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x1C
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x1D
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x1E
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x1F
+            }
+        })
+        Name (PR14, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKH, 
+                Zero
+            }
+        })
+        Name (AR14, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x2C
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x2D
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x2E
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x2F
+            }
+        })
+        Name (PR15, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKH, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKF, 
+                Zero
+            }
+        })
+        Name (AR15, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x2E
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x2F
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x2C
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x2D
+            }
+        })
+        Name (PR16, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKD, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKC, 
+                Zero
+            }
+        })
+        Name (AR16, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x33
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x30
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x31
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x32
+            }
+        })
+        Name (PR17, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKD, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKB, 
+                Zero
+            }
+        })
+        Name (AR17, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x32
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x33
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x30
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x31
+            }
+        })
+        Name (PR19, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKD, 
+                Zero
+            }
+        })
+        Name (AR19, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x30
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x31
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x32
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x33
+            }
+        })
+        Name (PR1A, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKH, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKG, 
+                Zero
+            }
+        })
+        Name (AR1A, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x2F
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x2C
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x2D
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x2E
+            }
+        })
+        Name (PR1B, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKD, 
+                Zero
+            }
+        })
+        Name (AR1B, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x20
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x21
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x22
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x23
+            }
+        })
+        Name (PR1C, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKH, 
+                Zero
+            }
+        })
+        Name (AR1C, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x24
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x25
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x26
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x27
+            }
+        })
+        Name (PR1D, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKD, 
+                Zero
+            }
+        })
+        Name (AR1D, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x28
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x29
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x2A
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x2B
+            }
+        })
+        Name (PR40, Package (0x0C)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0002FFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0003FFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0004FFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0005FFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                Zero, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0007FFFF, 
+                Zero, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0009FFFF, 
+                Zero, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x000AFFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x000BFFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x000CFFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x000DFFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }
+        })
+        Name (AR40, Package (0x0C)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x57
+            }, 
+
+            Package (0x04)
+            {
+                0x0002FFFF, 
+                Zero, 
+                Zero, 
+                0x54
+            }, 
+
+            Package (0x04)
+            {
+                0x0003FFFF, 
+                Zero, 
+                Zero, 
+                0x54
+            }, 
+
+            Package (0x04)
+            {
+                0x0004FFFF, 
+                Zero, 
+                Zero, 
+                0x54
+            }, 
+
+            Package (0x04)
+            {
+                0x0005FFFF, 
+                Zero, 
+                Zero, 
+                0x54
+            }, 
+
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                Zero, 
+                Zero, 
+                0x55
+            }, 
+
+            Package (0x04)
+            {
+                0x0007FFFF, 
+                Zero, 
+                Zero, 
+                0x55
+            }, 
+
+            Package (0x04)
+            {
+                0x0009FFFF, 
+                Zero, 
+                Zero, 
+                0x55
+            }, 
+
+            Package (0x04)
+            {
+                0x000AFFFF, 
+                Zero, 
+                Zero, 
+                0x56
+            }, 
+
+            Package (0x04)
+            {
+                0x000BFFFF, 
+                Zero, 
+                Zero, 
+                0x56
+            }, 
+
+            Package (0x04)
+            {
+                0x000CFFFF, 
+                Zero, 
+                Zero, 
+                0x56
+            }, 
+
+            Package (0x04)
+            {
+                0x000DFFFF, 
+                Zero, 
+                Zero, 
+                0x56
+            }
+        })
+        Name (PR42, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKD, 
+                Zero
+            }
+        })
+        Name (AR42, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x38
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x39
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x3A
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x3B
+            }
+        })
+        Name (PR43, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKH, 
+                Zero
+            }
+        })
+        Name (AR43, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x3C
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x3D
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x3E
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x3F
+            }
+        })
+        Name (PR44, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKH, 
+                Zero
+            }
+        })
+        Name (AR44, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x4C
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x4D
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x4E
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x4F
+            }
+        })
+        Name (PR45, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKH, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKF, 
+                Zero
+            }
+        })
+        Name (AR45, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x4E
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x4F
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x4C
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x4D
+            }
+        })
+        Name (PR46, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKD, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKC, 
+                Zero
+            }
+        })
+        Name (AR46, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x53
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x50
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x51
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x52
+            }
+        })
+        Name (PR47, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKD, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKB, 
+                Zero
+            }
+        })
+        Name (AR47, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x52
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x53
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x50
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x51
+            }
+        })
+        Name (PR49, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKD, 
+                Zero
+            }
+        })
+        Name (AR49, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x50
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x51
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x52
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x53
+            }
+        })
+        Name (PR4A, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKH, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKG, 
+                Zero
+            }
+        })
+        Name (AR4A, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x4F
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x4C
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x4D
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x4E
+            }
+        })
+        Name (PR4B, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKD, 
+                Zero
+            }
+        })
+        Name (AR4B, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x40
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x41
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x42
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x43
+            }
+        })
+        Name (PR4C, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKH, 
+                Zero
+            }
+        })
+        Name (AR4C, Package (0x04)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x44
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x45
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x46
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x47
+            }
+        })
+        Name (PR01, Package (0x08)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKA, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                LNKD, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0001FFFF, 
+                Zero, 
+                LNKB, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0001FFFF, 
+                One, 
+                LNKC, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0001FFFF, 
+                0x02, 
+                LNKD, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0001FFFF, 
+                0x03, 
+                LNKA, 
+                Zero
+            }
+        })
+        Name (AR01, Package (0x08)
+        {
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x10
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                One, 
+                Zero, 
+                0x11
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x02, 
+                Zero, 
+                0x12
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                0x03, 
+                Zero, 
+                0x13
+            }, 
+
+            Package (0x04)
+            {
+                0x0001FFFF, 
+                Zero, 
+                Zero, 
+                0x11
+            }, 
+
+            Package (0x04)
+            {
+                0x0001FFFF, 
+                One, 
+                Zero, 
+                0x12
+            }, 
+
+            Package (0x04)
+            {
+                0x0001FFFF, 
+                0x02, 
+                Zero, 
+                0x13
+            }, 
+
+            Package (0x04)
+            {
+                0x0001FFFF, 
+                0x03, 
+                Zero, 
+                0x10
+            }
+        })
+        Name (PR0C, Package (0x05)
+        {
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                Zero, 
+                LNKG, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                One, 
+                LNKH, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                0x02, 
+                LNKE, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                0x03, 
+                LNKF, 
+                Zero
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                LNKH, 
+                Zero
+            }
+        })
+        Name (AR0C, Package (0x05)
+        {
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                Zero, 
+                Zero, 
+                0x16
+            }, 
+
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                One, 
+                Zero, 
+                0x17
+            }, 
+
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                0x02, 
+                Zero, 
+                0x14
+            }, 
+
+            Package (0x04)
+            {
+                0x0006FFFF, 
+                0x03, 
+                Zero, 
+                0x15
+            }, 
+
+            Package (0x04)
+            {
+                0xFFFF, 
+                Zero, 
+                Zero, 
+                0x17
+            }
+        })
+        Name (PRSA, ResourceTemplate ()
+        {
+            IRQ (Level, ActiveLow, Shared, )
+                {4,7,10,11,12,14,15}
+        })
+        Alias (PRSA, PRSB)
+        Alias (PRSA, PRSC)
+        Alias (PRSA, PRSD)
+        Alias (PRSA, PRSE)
+        Alias (PRSA, PRSF)
+        Alias (PRSA, PRSG)
+        Alias (PRSA, PRSH)
+        Device (PCI0)
+        {
+            Name (_HID, EisaId ("PNP0A03"))  // _HID: Hardware ID
+            Name (_ADR, 0x00180002)  // _ADR: Address
+            Method (^BN00, 0, NotSerialized)
+            {
+                Return (Zero)
+            }
+
+            Method (_BBN, 0, NotSerialized)  // _BBN: BIOS Bus Number
+            {
+                Return (BN00 ())
+            }
+
+            Name (_UID, Zero)  // _UID: Unique ID
+            Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+            {
+                If (PICM)
+                {
+                    Return (AR00)
+                }
+
+                Return (PR00)
+            }
+
+            Method (NPTS, 1, NotSerialized)
+            {
+            }
+
+            Method (NWAK, 1, NotSerialized)
+            {
+            }
+
+            Device (RD8A)
+            {
+                Name (_ADR, Zero)  // _ADR: Address
+                OperationRegion (NB2, PCI_Config, Zero, 0x0100)
+                Field (NB2, AnyAcc, NoLock, Preserve)
+                {
+                    Offset (0x60), 
+                    MI,     32, 
+                    MD,     32, 
+                    Offset (0x94), 
+                    HI,     32, 
+                    HD,     32, 
+                    Offset (0xF8), 
+                    API,    32, 
+                    APD,    32
+                }
+
+                Device (NMEM)
+                {
+                    Name (_HID, EisaId ("PNP0C02"))  // _HID: Hardware ID
+                    Name (_UID, 0x14)  // _UID: Unique ID
+                    Name (CRS, ResourceTemplate ()
+                    {
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y00)
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y01)
+                    })
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        CreateDWordField (CRS, \_SB.PCI0.RD8A.NMEM._Y00._BAS, BAS1)  // _BAS: Base Address
+                        CreateDWordField (CRS, \_SB.PCI0.RD8A.NMEM._Y00._LEN, LEN1)  // _LEN: Length
+                        Store (0x3C, MI)
+                        Store (MD, Local0)
+                        If (And (Local0, 0x40))
+                        {
+                            Store (0x3A, MI)
+                            And (MD, 0xFFFFFF00, BAS1)
+                            ShiftLeft (And (MD, 0xFF), 0x17, LEN1)
+                        }
+
+                        CreateDWordField (CRS, \_SB.PCI0.RD8A.NMEM._Y01._BAS, BAS2)  // _BAS: Base Address
+                        CreateDWordField (CRS, \_SB.PCI0.RD8A.NMEM._Y01._LEN, LEN2)  // _LEN: Length
+                        Store (Zero, API)
+                        Store (APD, Local1)
+                        If (And (Local1, One))
+                        {
+                            Store (0x0100, LEN2)
+                            Store (One, API)
+                            And (APD, 0xFFFFFF00, BAS2)
+                        }
+
+                        Return (CRS)
+                    }
+                }
+            }
+
+            Device (IOMA)
+            {
+                Name (_ADR, 0x02)  // _ADR: Address
+                OperationRegion (NBF2, PCI_Config, Zero, 0x0100)
+                Field (NBF2, AnyAcc, NoLock, Preserve)
+                {
+                    DID,    32, 
+                    Offset (0x44), 
+                    MBAS,   32
+                }
+
+                Device (UMEM)
+                {
+                    Name (_HID, EisaId ("PNP0C02"))  // _HID: Hardware ID
+                    Name (_UID, 0x15)  // _UID: Unique ID
+                    Name (CRS, ResourceTemplate ()
+                    {
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y02)
+                    })
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        CreateDWordField (CRS, \_SB.PCI0.IOMA.UMEM._Y02._BAS, BAS3)  // _BAS: Base Address
+                        CreateDWordField (CRS, \_SB.PCI0.IOMA.UMEM._Y02._LEN, LEN3)  // _LEN: Length
+                        If (LNotEqual (DID, Ones))
+                        {
+                            Store (0x4000, LEN3)
+                            And (MBAS, 0xFFFFFF00, BAS3)
+                        }
+
+                        Return (CRS)
+                    }
+                }
+            }
+
+            Device (PC02)
+            {
+                Name (_ADR, 0x00020000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR12)
+                    }
+
+                    Return (PR12)
+                }
+            }
+
+            Device (PC03)
+            {
+                Name (_ADR, 0x00030000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR13)
+                    }
+
+                    Return (PR13)
+                }
+            }
+
+            Device (PC04)
+            {
+                Name (_ADR, 0x00040000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR14)
+                    }
+
+                    Return (PR14)
+                }
+            }
+
+            Device (PC05)
+            {
+                Name (_ADR, 0x00050000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR15)
+                    }
+
+                    Return (PR15)
+                }
+            }
+
+            Device (PC06)
+            {
+                Name (_ADR, 0x00060000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR16)
+                    }
+
+                    Return (PR16)
+                }
+            }
+
+            Device (PC07)
+            {
+                Name (_ADR, 0x00070000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR17)
+                    }
+
+                    Return (PR17)
+                }
+            }
+
+            Device (PC09)
+            {
+                Name (_ADR, 0x00090000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR19)
+                    }
+
+                    Return (PR19)
+                }
+
+                Device (LAN3)
+                {
+                    Name (_ADR, Zero)  // _ADR: Address
+                }
+            }
+
+            Device (PC0A)
+            {
+                Name (_ADR, 0x000A0000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR1A)
+                    }
+
+                    Return (PR1A)
+                }
+            }
+
+            Device (PC0B)
+            {
+                Name (_ADR, 0x000B0000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR1B)
+                    }
+
+                    Return (PR1B)
+                }
+            }
+
+            Device (PC0C)
+            {
+                Name (_ADR, 0x000C0000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR1C)
+                    }
+
+                    Return (PR1C)
+                }
+            }
+
+            Device (PC0D)
+            {
+                Name (_ADR, 0x000D0000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR1D)
+                    }
+
+                    Return (PR1D)
+                }
+
+                Device (LA12)
+                {
+                    Name (_ADR, Zero)  // _ADR: Address
+                }
+
+                Device (IA12)
+                {
+                    Name (_ADR, Zero)  // _ADR: Address
+                }
+            }
+
+            Device (SMBS)
+            {
+                Name (_ADR, 0x00140000)  // _ADR: Address
+                OperationRegion (SMBS, PCI_Config, Zero, 0x0100)
+                Field (SMBS, AnyAcc, NoLock, Preserve)
+                {
+                    Offset (0x08), 
+                    REV,    8
+                }
+
+                OperationRegion (WIDE, PCI_Config, 0xAD, One)
+                Field (WIDE, AnyAcc, NoLock, Preserve)
+                {
+                    DUM1,   4, 
+                    SOPT,   1
+                }
+            }
+
+            Device (IDEC)
+            {
+                Name (_ADR, 0x00140001)  // _ADR: Address
+                Name (UDMT, Package (0x08)
+                {
+                    0x78, 
+                    0x5A, 
+                    0x3C, 
+                    0x2D, 
+                    0x1E, 
+                    0x14, 
+                    0x0F, 
+                    Zero
+                })
+                Name (PIOT, Package (0x06)
+                {
+                    0x0258, 
+                    0x0186, 
+                    0x010E, 
+                    0xB4, 
+                    0x78, 
+                    Zero
+                })
+                Name (PITR, Package (0x06)
+                {
+                    0x99, 
+                    0x47, 
+                    0x34, 
+                    0x22, 
+                    0x20, 
+                    0x99
+                })
+                Name (MDMT, Package (0x04)
+                {
+                    0x01E0, 
+                    0x96, 
+                    0x78, 
+                    Zero
+                })
+                Name (MDTR, Package (0x04)
+                {
+                    0x77, 
+                    0x21, 
+                    0x20, 
+                    0xFF
+                })
+                OperationRegion (IDE, PCI_Config, 0x40, 0x20)
+                Field (IDE, AnyAcc, NoLock, Preserve)
+                {
+                    PPIT,   16, 
+                    SPIT,   16, 
+                    PMDT,   16, 
+                    SMDT,   16, 
+                    PPIC,   8, 
+                    SPIC,   8, 
+                    PPIM,   8, 
+                    SPIM,   8, 
+                    Offset (0x14), 
+                    PUDC,   2, 
+                    SUDC,   2, 
+                    Offset (0x16), 
+                    PUDM,   8, 
+                    SUDM,   8
+                }
+
+                Method (GETT, 1, NotSerialized)
+                {
+                    Store (And (Arg0, 0x0F), Local0)
+                    Store (ShiftRight (Arg0, 0x04), Local1)
+                    Return (Multiply (0x1E, Add (Add (Local0, One), Add (Local1, 
+                        One))))
+                }
+
+                Method (GTM, 1, NotSerialized)
+                {
+                    CreateByteField (Arg0, Zero, PIT1)
+                    CreateByteField (Arg0, One, PIT0)
+                    CreateByteField (Arg0, 0x02, MDT1)
+                    CreateByteField (Arg0, 0x03, MDT0)
+                    CreateByteField (Arg0, 0x04, PICX)
+                    CreateByteField (Arg0, 0x05, UDCX)
+                    CreateByteField (Arg0, 0x06, UDMX)
+                    Name (BUF, Buffer (0x14)
+                    {
+                        /* 0000 */   0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+                        /* 0008 */   0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+                        /* 0010 */   0x00, 0x00, 0x00, 0x00
+                    })
+                    CreateDWordField (BUF, Zero, PIO0)
+                    CreateDWordField (BUF, 0x04, DMA0)
+                    CreateDWordField (BUF, 0x08, PIO1)
+                    CreateDWordField (BUF, 0x0C, DMA1)
+                    CreateDWordField (BUF, 0x10, FLAG)
+                    If (And (PICX, One))
+                    {
+                        Return (BUF)
+                    }
+
+                    Store (GETT (PIT0), PIO0)
+                    Store (GETT (PIT1), PIO1)
+                    If (And (UDCX, One))
+                    {
+                        Or (FLAG, One, FLAG)
+                        Store (DerefOf (Index (UDMT, And (UDMX, 0x0F))), DMA0)
+                    }
+                    Else
+                    {
+                        Store (GETT (MDT0), DMA0)
+                    }
+
+                    If (And (UDCX, 0x02))
+                    {
+                        Or (FLAG, 0x04, FLAG)
+                        Store (DerefOf (Index (UDMT, ShiftRight (UDMX, 0x04))), DMA1)
+                    }
+                    Else
+                    {
+                        Store (GETT (MDT1), DMA1)
+                    }
+
+                    Or (FLAG, 0x1A, FLAG)
+                    Return (BUF)
+                }
+
+                Method (STM, 3, NotSerialized)
+                {
+                    CreateDWordField (Arg0, Zero, PIO0)
+                    CreateDWordField (Arg0, 0x04, DMA0)
+                    CreateDWordField (Arg0, 0x08, PIO1)
+                    CreateDWordField (Arg0, 0x0C, DMA1)
+                    CreateDWordField (Arg0, 0x10, FLAG)
+                    Name (BUF, Buffer (0x07)
+                    {
+                         0x00, 0x00, 0xFF, 0xFF, 0x00, 0x00, 0x00
+                    })
+                    CreateByteField (BUF, Zero, PIT1)
+                    CreateByteField (BUF, One, PIT0)
+                    CreateByteField (BUF, 0x02, MDT1)
+                    CreateByteField (BUF, 0x03, MDT0)
+                    CreateByteField (BUF, 0x04, PIMX)
+                    CreateByteField (BUF, 0x05, UDCX)
+                    CreateByteField (BUF, 0x06, UDMX)
+                    Store (Match (PIOT, MLE, PIO0, MTR, Zero, Zero), Local0)
+                    Divide (Local0, 0x05, Local0)
+                    Store (Match (PIOT, MLE, PIO1, MTR, Zero, Zero), Local1)
+                    Divide (Local1, 0x05, Local1)
+                    Store (Or (ShiftLeft (Local1, 0x04), Local0), PIMX)
+                    Store (DerefOf (Index (PITR, Local0)), PIT0)
+                    Store (DerefOf (Index (PITR, Local1)), PIT1)
+                    If (And (FLAG, One))
+                    {
+                        Store (Match (UDMT, MLE, DMA0, MTR, Zero, Zero), Local0)
+                        Divide (Local0, 0x07, Local0)
+                        Or (UDMX, Local0, UDMX)
+                        Or (UDCX, One, UDCX)
+                    }
+                    Else
+                    {
+                        If (LNotEqual (DMA0, Ones))
+                        {
+                            Store (Match (MDMT, MLE, DMA0, MTR, Zero, Zero), Local0)
+                            Store (DerefOf (Index (MDTR, Local0)), MDT0)
+                        }
+                    }
+
+                    If (And (FLAG, 0x04))
+                    {
+                        Store (Match (UDMT, MLE, DMA1, MTR, Zero, Zero), Local0)
+                        Divide (Local0, 0x07, Local0)
+                        Or (UDMX, ShiftLeft (Local0, 0x04), UDMX)
+                        Or (UDCX, 0x02, UDCX)
+                    }
+                    Else
+                    {
+                        If (LNotEqual (DMA1, Ones))
+                        {
+                            Store (Match (MDMT, MLE, DMA1, MTR, Zero, Zero), Local0)
+                            Store (DerefOf (Index (MDTR, Local0)), MDT1)
+                        }
+                    }
+
+                    Return (BUF)
+                }
+
+                Method (GTF, 2, NotSerialized)
+                {
+                    CreateByteField (Arg1, Zero, MDT1)
+                    CreateByteField (Arg1, One, MDT0)
+                    CreateByteField (Arg1, 0x02, PIMX)
+                    CreateByteField (Arg1, 0x03, UDCX)
+                    CreateByteField (Arg1, 0x04, UDMX)
+                    If (LEqual (Arg0, 0xA0))
+                    {
+                        Store (And (PIMX, 0x0F), Local0)
+                        Store (MDT0, Local1)
+                        And (UDCX, One, Local2)
+                        Store (And (UDMX, 0x0F), Local3)
+                    }
+                    Else
+                    {
+                        Store (ShiftRight (PIMX, 0x04), Local0)
+                        Store (MDT1, Local1)
+                        And (UDCX, 0x02, Local2)
+                        Store (ShiftRight (UDMX, 0x04), Local3)
+                    }
+
+                    Name (BUF, Buffer (0x15)
+                    {
+                        /* 0000 */   0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, 0x03,
+                        /* 0008 */   0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, 0x00, 0x00,
+                        /* 0010 */   0x00, 0x00, 0x00, 0x00, 0xF5
+                    })
+                    CreateByteField (BUF, One, PMOD)
+                    CreateByteField (BUF, 0x08, DMOD)
+                    CreateByteField (BUF, 0x05, CMDA)
+                    CreateByteField (BUF, 0x0C, CMDB)
+                    CreateByteField (BUF, 0x13, CMDC)
+                    Store (Arg0, CMDA)
+                    Store (Arg0, CMDB)
+                    Store (Arg0, CMDC)
+                    Or (Local0, 0x08, PMOD)
+                    If (Local2)
+                    {
+                        Or (Local3, 0x40, DMOD)
+                    }
+                    Else
+                    {
+                        Store (Match (MDMT, MLE, GETT (Local1), MTR, Zero, Zero), Local4)
+                        If (LLess (Local4, 0x03))
+                        {
+                            Or (0x20, Local4, DMOD)
+                        }
+                    }
+
+                    Return (BUF)
+                }
+
+                Device (PRID)
+                {
+                    Name (_ADR, Zero)  // _ADR: Address
+                    Method (_GTM, 0, NotSerialized)  // _GTM: Get Timing Mode
+                    {
+                        Name (BUF, Buffer (0x07)
+                        {
+                             0x00, 0x00, 0xFF, 0xFF, 0x00, 0x00, 0x00
+                        })
+                        CreateWordField (BUF, Zero, VPIT)
+                        CreateWordField (BUF, 0x02, VMDT)
+                        CreateByteField (BUF, 0x04, VPIC)
+                        CreateByteField (BUF, 0x05, VUDC)
+                        CreateByteField (BUF, 0x06, VUDM)
+                        If (LOr (LGreaterEqual (^^^SMBS.REV, 0x3A), ^^^SMBS.SOPT))
+                        {
+                            Store (PPIT, VPIT)
+                            Store (PMDT, VMDT)
+                            Store (PPIC, VPIC)
+                            Store (PUDC, VUDC)
+                            Store (PUDM, VUDM)
+                        }
+                        Else
+                        {
+                            Store (SPIT, VPIT)
+                            Store (SMDT, VMDT)
+                            Store (SPIC, VPIC)
+                            Store (SUDC, VUDC)
+                            Store (SUDM, VUDM)
+                        }
+
+                        Return (GTM (BUF))
+                    }
+
+                    Method (_STM, 3, NotSerialized)  // _STM: Set Timing Mode
+                    {
+                        Name (BUF, Buffer (0x07)
+                        {
+                             0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+                        })
+                        CreateWordField (BUF, Zero, VPIT)
+                        CreateWordField (BUF, 0x02, VMDT)
+                        CreateByteField (BUF, 0x04, VPIM)
+                        CreateByteField (BUF, 0x05, VUDC)
+                        CreateByteField (BUF, 0x06, VUDM)
+                        Store (STM (Arg0, Arg1, Arg2), BUF)
+                        If (LOr (LGreaterEqual (^^^SMBS.REV, 0x3A), ^^^SMBS.SOPT))
+                        {
+                            Store (VPIT, PPIT)
+                            Store (VMDT, PMDT)
+                            Store (VPIM, PPIM)
+                            Store (VUDC, PUDC)
+                            Store (VUDM, PUDM)
+                        }
+                        Else
+                        {
+                            Store (VPIT, SPIT)
+                            Store (VMDT, SMDT)
+                            Store (VPIM, SPIM)
+                            Store (VUDC, SUDC)
+                            Store (VUDM, SUDM)
+                        }
+                    }
+
+                    Device (P_D0)
+                    {
+                        Name (_ADR, Zero)  // _ADR: Address
+                        Method (_GTF, 0, NotSerialized)  // _GTF: Get Task File
+                        {
+                            Name (BUF, Buffer (0x05)
+                            {
+                                 0x00, 0x00, 0x00, 0x00, 0x00
+                            })
+                            CreateWordField (BUF, Zero, VMDT)
+                            CreateByteField (BUF, 0x02, VPIM)
+                            CreateByteField (BUF, 0x03, VUDC)
+                            CreateByteField (BUF, 0x04, VUDM)
+                            If (LOr (LGreaterEqual (^^^^SMBS.REV, 0x3A), ^^^^SMBS.SOPT))
+                            {
+                                Store (PMDT, VMDT)
+                                Store (PPIM, VPIM)
+                                Store (PUDC, VUDC)
+                                Store (PUDM, VUDM)
+                            }
+                            Else
+                            {
+                                Store (SMDT, VMDT)
+                                Store (SPIM, VPIM)
+                                Store (SUDC, VUDC)
+                                Store (SUDM, VUDM)
+                            }
+
+                            Return (GTF (0xA0, BUF))
+                        }
+                    }
+
+                    Device (P_D1)
+                    {
+                        Name (_ADR, One)  // _ADR: Address
+                        Method (_GTF, 0, NotSerialized)  // _GTF: Get Task File
+                        {
+                            Name (BUF, Buffer (0x05)
+                            {
+                                 0x00, 0x00, 0x00, 0x00, 0x00
+                            })
+                            CreateWordField (BUF, Zero, VMDT)
+                            CreateByteField (BUF, 0x02, VPIM)
+                            CreateByteField (BUF, 0x03, VUDC)
+                            CreateByteField (BUF, 0x04, VUDM)
+                            If (LOr (LGreaterEqual (^^^^SMBS.REV, 0x3A), ^^^^SMBS.SOPT))
+                            {
+                                Store (PMDT, VMDT)
+                                Store (PPIM, VPIM)
+                                Store (PUDC, VUDC)
+                                Store (PUDM, VUDM)
+                            }
+                            Else
+                            {
+                                Store (SMDT, VMDT)
+                                Store (SPIM, VPIM)
+                                Store (SUDC, VUDC)
+                                Store (SUDM, VUDM)
+                            }
+
+                            Return (GTF (0xB0, BUF))
+                        }
+                    }
+                }
+
+                Device (SECD)
+                {
+                    Name (_ADR, One)  // _ADR: Address
+                    Method (_GTM, 0, NotSerialized)  // _GTM: Get Timing Mode
+                    {
+                        Name (BUF, Buffer (0x07)
+                        {
+                             0x00, 0x00, 0xFF, 0xFF, 0x00, 0x00, 0x00
+                        })
+                        CreateWordField (BUF, Zero, VPIT)
+                        CreateWordField (BUF, 0x02, VMDT)
+                        CreateByteField (BUF, 0x04, VPIC)
+                        CreateByteField (BUF, 0x05, VUDC)
+                        CreateByteField (BUF, 0x06, VUDM)
+                        If (LOr (LGreaterEqual (^^^SMBS.REV, 0x3A), ^^^SMBS.SOPT))
+                        {
+                            Store (SPIT, VPIT)
+                            Store (SMDT, VMDT)
+                            Store (SPIC, VPIC)
+                            Store (SUDC, VUDC)
+                            Store (SUDM, VUDM)
+                        }
+                        Else
+                        {
+                            Store (PPIT, VPIT)
+                            Store (PMDT, VMDT)
+                            Store (PPIC, VPIC)
+                            Store (PUDC, VUDC)
+                            Store (PUDM, VUDM)
+                        }
+
+                        Return (GTM (BUF))
+                    }
+
+                    Method (_STM, 3, NotSerialized)  // _STM: Set Timing Mode
+                    {
+                        Name (BUF, Buffer (0x07)
+                        {
+                             0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+                        })
+                        CreateWordField (BUF, Zero, VPIT)
+                        CreateWordField (BUF, 0x02, VMDT)
+                        CreateByteField (BUF, 0x04, VPIM)
+                        CreateByteField (BUF, 0x05, VUDC)
+                        CreateByteField (BUF, 0x06, VUDM)
+                        Store (STM (Arg0, Arg1, Arg2), BUF)
+                        If (LOr (LGreaterEqual (^^^SMBS.REV, 0x3A), ^^^SMBS.SOPT))
+                        {
+                            Store (VPIT, SPIT)
+                            Store (VMDT, SMDT)
+                            Store (VPIM, SPIM)
+                            Store (VUDC, SUDC)
+                            Store (VUDM, SUDM)
+                        }
+                        Else
+                        {
+                            Store (VPIT, PPIT)
+                            Store (VMDT, PMDT)
+                            Store (VPIM, PPIM)
+                            Store (VUDC, PUDC)
+                            Store (VUDM, PUDM)
+                        }
+                    }
+
+                    Device (S_D0)
+                    {
+                        Name (_ADR, Zero)  // _ADR: Address
+                        Method (_GTF, 0, NotSerialized)  // _GTF: Get Task File
+                        {
+                            Name (BUF, Buffer (0x05)
+                            {
+                                 0x00, 0x00, 0x00, 0x00, 0x00
+                            })
+                            CreateWordField (BUF, Zero, VMDT)
+                            CreateByteField (BUF, 0x02, VPIM)
+                            CreateByteField (BUF, 0x03, VUDC)
+                            CreateByteField (BUF, 0x04, VUDM)
+                            If (LOr (LGreaterEqual (^^^^SMBS.REV, 0x3A), ^^^^SMBS.SOPT))
+                            {
+                                Store (SMDT, VMDT)
+                                Store (SPIM, VPIM)
+                                Store (SUDC, VUDC)
+                                Store (SUDM, VUDM)
+                            }
+                            Else
+                            {
+                                Store (PMDT, VMDT)
+                                Store (PPIM, VPIM)
+                                Store (PUDC, VUDC)
+                                Store (PUDM, VUDM)
+                            }
+
+                            Return (GTF (0xA0, BUF))
+                        }
+                    }
+
+                    Device (S_D1)
+                    {
+                        Name (_ADR, One)  // _ADR: Address
+                        Method (_GTF, 0, NotSerialized)  // _GTF: Get Task File
+                        {
+                            Name (BUF, Buffer (0x05)
+                            {
+                                 0x00, 0x00, 0x00, 0x00, 0x00
+                            })
+                            CreateWordField (BUF, Zero, VMDT)
+                            CreateByteField (BUF, 0x02, VPIM)
+                            CreateByteField (BUF, 0x03, VUDC)
+                            CreateByteField (BUF, 0x04, VUDM)
+                            If (LOr (LGreaterEqual (^^^^SMBS.REV, 0x3A), ^^^^SMBS.SOPT))
+                            {
+                                Store (SMDT, VMDT)
+                                Store (SPIM, VPIM)
+                                Store (SUDC, VUDC)
+                                Store (SUDM, VUDM)
+                            }
+                            Else
+                            {
+                                Store (PMDT, VMDT)
+                                Store (PPIM, VPIM)
+                                Store (PUDC, VUDC)
+                                Store (PUDM, VUDM)
+                            }
+
+                            Return (GTF (0xB0, BUF))
+                        }
+                    }
+                }
+            }
+
+            Device (SBAZ)
+            {
+                Name (_ADR, 0x00140002)  // _ADR: Address
+                OperationRegion (PCI, PCI_Config, Zero, 0x0100)
+                Field (PCI, AnyAcc, NoLock, Preserve)
+                {
+                    Offset (0x42), 
+                    DNSP,   1, 
+                    DNSO,   1, 
+                    ENSR,   1
+                }
+
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x1B, 0x04))
+                }
+            }
+
+            Device (SBRG)
+            {
+                Name (_ADR, 0x00140003)  // _ADR: Address
+                OperationRegion (LPCS, PCI_Config, Zero, 0x0100)
+                Field (LPCS, AnyAcc, NoLock, Preserve)
+                {
+                    Offset (0x40), 
+                        ,   7, 
+                    ECEN,   1, 
+                    Offset (0xA4), 
+                    ECAD,   16
+                }
+
+                Name (ECIN, Zero)
+                Mutex (ECMU, 0x00)
+                Mutex (MLMU, 0x00)
+                OperationRegion (ECBP, SystemIO, And (ECAD, 0xFFFE), 0x02)
+                Field (ECBP, ByteAcc, NoLock, Preserve)
+                {
+                    BPIO,   8
+                }
+
+                OperationRegion (ECIO, SystemIO, And (ECAD, 0xFFFE), 0x02)
+                Field (ECIO, ByteAcc, NoLock, Preserve)
+                {
+                    IND,    8, 
+                    DAT,    8
+                }
+
+                IndexField (IND, DAT, ByteAcc, NoLock, Preserve)
+                {
+                    Offset (0x07), 
+                    LDNM,   8, 
+                    Offset (0x22), 
+                    POW,    8, 
+                    Offset (0x30), 
+                    ACT,    1, 
+                    Offset (0x60), 
+                    IOBH,   8, 
+                    IOBL,   8, 
+                    Offset (0x70), 
+                    INT,    4
+                }
+
+                Method (CFG, 1, NotSerialized)
+                {
+                    If (ECEN)
+                    {
+                        Store (0x5A, BPIO)
+                        Store (0x5A, BPIO)
+                        Store (Arg0, LDNM)
+                    }
+                }
+
+                Method (XCFG, 0, NotSerialized)
+                {
+                    If (ECEN)
+                    {
+                        Store (0xA5, BPIO)
+                    }
+                }
+
+                Method (STA, 1, NotSerialized)
+                {
+                    If (ECEN)
+                    {
+                        Acquire (ECMU, 0x5000)
+                        CFG (Arg0)
+                        Store (Zero, Local1)
+                        If (ACT)
+                        {
+                            Store (0x0F, Local1)
+                        }
+
+                        If (LEqual (IND, 0xFF))
+                        {
+                            Store (Zero, Local1)
+                        }
+
+                        XCFG ()
+                        Release (ECMU)
+                        Return (Local1)
+                    }
+                    Else
+                    {
+                        Store (Zero, Local1)
+                        Return (Local1)
+                    }
+                }
+
+                Method (RDMB, 1, NotSerialized)
+                {
+                    If (ECEN)
+                    {
+                        Acquire (ECMU, 0x1388)
+                        Acquire (MLMU, 0x1388)
+                        CFG (0x05)
+                        Name (IOBA, Zero)
+                        Store (IOBH, IOBA)
+                        ShiftLeft (IOBA, 0x08, IOBA)
+                        Or (IOBA, IOBL, IOBA)
+                        OperationRegion (MLIO, SystemIO, IOBA, 0x02)
+                        Field (MLIO, ByteAcc, NoLock, Preserve)
+                        {
+                            MLIN,   8, 
+                            MLDA,   8
+                        }
+
+                        Store (Arg0, MLIN)
+                        Return (MLDA)
+                        Release (MLMU)
+                        Release (ECMU)
+                    }
+                    Else
+                    {
+                        Return (Zero)
+                    }
+                }
+
+                Method (WRMB, 2, NotSerialized)
+                {
+                    If (ECEN)
+                    {
+                        Acquire (ECMU, 0x1388)
+                        Acquire (MLMU, 0x1388)
+                        CFG (0x05)
+                        Name (IOBA, Zero)
+                        Store (IOBH, IOBA)
+                        ShiftLeft (IOBA, 0x08, IOBA)
+                        Or (IOBA, IOBL, IOBA)
+                        OperationRegion (MLIO, SystemIO, IOBA, 0x02)
+                        Field (MLIO, ByteAcc, NoLock, Preserve)
+                        {
+                            MLIN,   8, 
+                            MLDA,   8
+                        }
+
+                        Store (Arg0, MLIN)
+                        Store (Arg1, MLDA)
+                        Release (MLMU)
+                        Release (ECMU)
+                    }
+                }
+
+                Name (KBWF, One)
+                Name (MSWF, One)
+                Name (IRWF, One)
+                Device (PSKE)
+                {
+                    Name (_HID, EisaId ("PNP0303"))  // _HID: Hardware ID
+                    Name (_CID, EisaId ("PNP030B"))  // _CID: Compatible ID
+                    Method (_STA, 0, NotSerialized)  // _STA: Status
+                    {
+                        If (ECEN)
+                        {
+                            Store (Zero, Local1)
+                            Store (STA (0x07), Local1)
+                        }
+                        Else
+                        {
+                            Store (Zero, Local1)
+                        }
+
+                        Return (Local1)
+                    }
+
+                    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                    {
+                        IO (Decode16,
+                            0x0060,             // Range Minimum
+                            0x0060,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x0064,             // Range Minimum
+                            0x0064,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IRQNoFlags ()
+                            {1}
+                    })
+                    Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                    {
+                        Return (GPRW (0x03, 0x04))
+                    }
+
+                    Method (_PSW, 1, NotSerialized)  // _PSW: Power State Wake
+                    {
+                        If (Arg0)
+                        {
+                            Store (One, KBWF)
+                        }
+                        Else
+                        {
+                            Store (Zero, KBWF)
+                        }
+                    }
+                }
+
+                Device (PSMS)
+                {
+                    Name (_HID, EisaId ("PNP0F03"))  // _HID: Hardware ID
+                    Name (_CID, EisaId ("PNP0F13"))  // _CID: Compatible ID
+                    Method (_STA, 0, NotSerialized)  // _STA: Status
+                    {
+                        If (ECEN)
+                        {
+                            Store (Zero, Local1)
+                            Store (STA (0x07), Local1)
+                        }
+                        Else
+                        {
+                            Store (Zero, Local1)
+                        }
+
+                        Return (Local1)
+                    }
+
+                    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                    {
+                        IRQNoFlags ()
+                            {12}
+                    })
+                    Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                    {
+                        Return (GPRW (0x03, 0x04))
+                    }
+
+                    Method (_PSW, 1, NotSerialized)  // _PSW: Power State Wake
+                    {
+                        If (Arg0)
+                        {
+                            Store (One, MSWF)
+                        }
+                        Else
+                        {
+                            Store (Zero, MSWF)
+                        }
+                    }
+                }
+
+                Method (KWEN, 0, NotSerialized)
+                {
+                    WRMB (0x81, Zero)
+                    WRMB (0x82, One)
+                    WRMB (0x80, Zero)
+                    WRMB (0xA0, 0x95)
+                }
+
+                Method (KWDS, 0, NotSerialized)
+                {
+                    WRMB (0x81, Zero)
+                    WRMB (0x82, Zero)
+                    WRMB (0x80, Zero)
+                    WRMB (0xA0, 0x95)
+                }
+
+                Method (MWEN, 0, NotSerialized)
+                {
+                    WRMB (0x81, One)
+                    WRMB (0x82, One)
+                    WRMB (0x80, Zero)
+                    WRMB (0xA0, 0x95)
+                }
+
+                Method (MWDS, 0, NotSerialized)
+                {
+                    WRMB (0x81, One)
+                    WRMB (0x82, Zero)
+                    WRMB (0x80, Zero)
+                    WRMB (0xA0, 0x95)
+                }
+
+                Device (ECIR)
+                {
+                    Name (_HID, EisaId ("AMDC001"))  // _HID: Hardware ID
+                    Method (_STA, 0, NotSerialized)  // _STA: Status
+                    {
+                        If (ECEN)
+                        {
+                            Store (Zero, Local1)
+                            If (LEqual (OSTY, 0x06))
+                            {
+                                Store (STA (0x05), Local1)
+                            }
+                        }
+                        Else
+                        {
+                            Store (Zero, Local1)
+                        }
+
+                        Return (Local1)
+                    }
+
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        Name (RSRC, ResourceTemplate ()
+                        {
+                            IO (Decode16,
+                                0x0000,             // Range Minimum
+                                0x0000,             // Range Maximum
+                                0x08,               // Alignment
+                                0x08,               // Length
+                                _Y03)
+                            IRQNoFlags (_Y04)
+                                {}
+                        })
+                        CreateByteField (RSRC, \_SB.PCI0.SBRG.ECIR._CRS._Y03._MIN, IO1)  // _MIN: Minimum Base Address
+                        CreateByteField (RSRC, 0x03, IO2)
+                        CreateByteField (RSRC, \_SB.PCI0.SBRG.ECIR._CRS._Y03._MAX, IO3)  // _MAX: Maximum Base Address
+                        CreateByteField (RSRC, 0x05, IO4)
+                        CreateWordField (RSRC, \_SB.PCI0.SBRG.ECIR._CRS._Y04._INT, IRQV)  // _INT: Interrupts
+                        Acquire (ECMU, 0x1388)
+                        CFG (0x05)
+                        If (ACT)
+                        {
+                            Store (IOBL, IO1)
+                            Store (IOBH, IO2)
+                            Store (IOBL, IO3)
+                            Store (IOBH, IO4)
+                            Store (One, Local0)
+                            ShiftLeft (Local0, INT, IRQV)
+                        }
+
+                        XCFG ()
+                        Release (ECMU)
+                        Return (RSRC)
+                    }
+
+                    Name (_PRS, ResourceTemplate ()  // _PRS: Possible Resource Settings
+                    {
+                        StartDependentFn (0x00, 0x00)
+                        {
+                            IO (Decode16,
+                                0x0550,             // Range Minimum
+                                0x0550,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQ (Edge, ActiveHigh, Shared, )
+                                {5}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x0650,             // Range Minimum
+                                0x0650,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQ (Edge, ActiveHigh, Shared, )
+                                {5}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x0550,             // Range Minimum
+                                0x0550,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQ (Edge, ActiveHigh, Shared, )
+                                {3}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x0650,             // Range Minimum
+                                0x0650,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQ (Edge, ActiveHigh, Shared, )
+                                {3}
+                        }
+                        EndDependentFn ()
+                    })
+                    Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+                    {
+                        CreateByteField (Arg0, 0x02, IO1)
+                        CreateByteField (Arg0, 0x03, IO2)
+                        CreateWordField (Arg0, 0x09, IRQV)
+                        Acquire (ECMU, 0x1388)
+                        CFG (0x05)
+                        Store (IO1, IOBL)
+                        Store (IO2, IOBH)
+                        FindSetRightBit (IRQV, Local0)
+                        Subtract (Local0, One, INT)
+                        Store (One, ACT)
+                        XCFG ()
+                        Release (ECMU)
+                    }
+
+                    Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                    {
+                        Return (GPRW (0x17, 0x04))
+                    }
+
+                    Method (_PSW, 1, NotSerialized)  // _PSW: Power State Wake
+                    {
+                        If (Arg0)
+                        {
+                            Store (One, IRWF)
+                        }
+                        Else
+                        {
+                            Store (Zero, IRWF)
+                        }
+                    }
+
+                    Method (IRCF, 2, NotSerialized)
+                    {
+                        Name (CONN, Zero)
+                        If (LEqual (Arg0, One))
+                        {
+                            Or (RVID, CONN, CONN)
+                            Or (0x00013200, CONN, CONN)
+                            Return (CONN)
+                        }
+
+                        If (LEqual (Arg0, 0x02))
+                        {
+                            ShiftLeft (GP64, One, CONN)
+                            Or (GP51, CONN, CONN)
+                            Return (CONN)
+                        }
+
+                        If (LEqual (Arg0, 0x03))
+                        {
+                            If (LEqual (Arg1, Zero))
+                            {
+                                Store (One, G31O)
+                            }
+                            Else
+                            {
+                                Store (Zero, G31O)
+                                Sleep (0x64)
+                                Store (One, G31O)
+                            }
+                        }
+
+                        If (LEqual (Arg0, 0x04))
+                        {
+                            If (LEqual (Arg1, Zero))
+                            {
+                                Store (Zero, ACIR)
+                            }
+                            Else
+                            {
+                                Store (One, ACIR)
+                            }
+                        }
+
+                        If (LOr (LEqual (Arg0, Zero), LGreater (Arg0, 0x05)))
+                        {
+                            Store (Ones, CONN)
+                        }
+
+                        Return (CONN)
+                    }
+                }
+
+                Method (PPTS, 1, NotSerialized)
+                {
+                    If (^PSKE._STA ())
+                    {
+                        If (KBWF)
+                        {
+                            KWEN ()
+                        }
+                        Else
+                        {
+                            KWDS ()
+                        }
+                    }
+
+                    If (^PSMS._STA ())
+                    {
+                        If (MSWF)
+                        {
+                            MWEN ()
+                        }
+                        Else
+                        {
+                            MWDS ()
+                        }
+                    }
+                }
+
+                Method (WWAK, 1, NotSerialized)
+                {
+                    If (^PSKE._STA ())
+                    {
+                        KWDS ()
+                    }
+
+                    If (^PSMS._STA ())
+                    {
+                        MWDS ()
+                    }
+                }
+
+                Method (EPTS, 1, NotSerialized)
+                {
+                    If (ECEN)
+                    {
+                        PPTS (Arg0)
+                    }
+                }
+
+                Method (EWAK, 1, NotSerialized)
+                {
+                    If (ECEN)
+                    {
+                        WWAK (Arg0)
+                    }
+                }
+
+                Device (PIC)
+                {
+                    Name (_HID, EisaId ("PNP0000"))  // _HID: Hardware ID
+                    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                    {
+                        IO (Decode16,
+                            0x0020,             // Range Minimum
+                            0x0020,             // Range Maximum
+                            0x00,               // Alignment
+                            0x02,               // Length
+                            )
+                        IO (Decode16,
+                            0x00A0,             // Range Minimum
+                            0x00A0,             // Range Maximum
+                            0x00,               // Alignment
+                            0x02,               // Length
+                            )
+                        IRQNoFlags ()
+                            {2}
+                    })
+                }
+
+                Device (DMAD)
+                {
+                    Name (_HID, EisaId ("PNP0200"))  // _HID: Hardware ID
+                    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                    {
+                        DMA (Compatibility, BusMaster, Transfer8, )
+                            {4}
+                        IO (Decode16,
+                            0x0000,             // Range Minimum
+                            0x0000,             // Range Maximum
+                            0x00,               // Alignment
+                            0x10,               // Length
+                            )
+                        IO (Decode16,
+                            0x0081,             // Range Minimum
+                            0x0081,             // Range Maximum
+                            0x00,               // Alignment
+                            0x03,               // Length
+                            )
+                        IO (Decode16,
+                            0x0087,             // Range Minimum
+                            0x0087,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x0089,             // Range Minimum
+                            0x0089,             // Range Maximum
+                            0x00,               // Alignment
+                            0x03,               // Length
+                            )
+                        IO (Decode16,
+                            0x008F,             // Range Minimum
+                            0x008F,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x00C0,             // Range Minimum
+                            0x00C0,             // Range Maximum
+                            0x00,               // Alignment
+                            0x20,               // Length
+                            )
+                    })
+                }
+
+                Device (TMR)
+                {
+                    Name (_HID, EisaId ("PNP0100"))  // _HID: Hardware ID
+                    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                    {
+                        IO (Decode16,
+                            0x0040,             // Range Minimum
+                            0x0040,             // Range Maximum
+                            0x00,               // Alignment
+                            0x04,               // Length
+                            )
+                        IRQNoFlags ()
+                            {0}
+                    })
+                }
+
+                Device (RTC0)
+                {
+                    Name (_HID, EisaId ("PNP0B00"))  // _HID: Hardware ID
+                    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                    {
+                        IO (Decode16,
+                            0x0070,             // Range Minimum
+                            0x0070,             // Range Maximum
+                            0x00,               // Alignment
+                            0x02,               // Length
+                            )
+                        IRQNoFlags ()
+                            {8}
+                    })
+                }
+
+                Device (PS2K)
+                {
+                    Name (_HID, EisaId ("PNP0303"))  // _HID: Hardware ID
+                    Name (_CID, EisaId ("PNP030B"))  // _CID: Compatible ID
+                    Method (_STA, 0, NotSerialized)  // _STA: Status
+                    {
+                        ShiftLeft (One, 0x0A, Local0)
+                        If (And (IOST, Local0))
+                        {
+                            Return (0x0F)
+                        }
+
+                        Return (Zero)
+                    }
+
+                    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                    {
+                        IO (Decode16,
+                            0x0060,             // Range Minimum
+                            0x0060,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x0064,             // Range Minimum
+                            0x0064,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IRQNoFlags ()
+                            {1}
+                    })
+                }
+
+                Device (PS2M)
+                {
+                    Name (_HID, EisaId ("PNP0F03"))  // _HID: Hardware ID
+                    Name (_CID, EisaId ("PNP0F13"))  // _CID: Compatible ID
+                    Method (_STA, 0, NotSerialized)  // _STA: Status
+                    {
+                        ShiftLeft (One, 0x0C, Local0)
+                        If (And (IOST, Local0))
+                        {
+                            Return (0x0F)
+                        }
+
+                        Return (Zero)
+                    }
+
+                    Name (M2R0, ResourceTemplate ()
+                    {
+                        IRQNoFlags ()
+                            {12}
+                    })
+                    Name (M2R1, ResourceTemplate ()
+                    {
+                        FixedIO (
+                            0x0060,             // Address
+                            0x01,               // Length
+                            )
+                        FixedIO (
+                            0x0064,             // Address
+                            0x01,               // Length
+                            )
+                        IRQNoFlags ()
+                            {12}
+                    })
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        ShiftLeft (One, 0x0A, Local0)
+                        If (And (IOST, Local0))
+                        {
+                            Return (M2R0)
+                        }
+                        Else
+                        {
+                            Return (M2R1)
+                        }
+                    }
+                }
+
+                Device (SPKR)
+                {
+                    Name (_HID, EisaId ("PNP0800"))  // _HID: Hardware ID
+                    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                    {
+                        IO (Decode16,
+                            0x0061,             // Range Minimum
+                            0x0061,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                    })
+                }
+
+                Device (COPR)
+                {
+                    Name (_HID, EisaId ("PNP0C04"))  // _HID: Hardware ID
+                    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+                    {
+                        IO (Decode16,
+                            0x00F0,             // Range Minimum
+                            0x00F0,             // Range Maximum
+                            0x00,               // Alignment
+                            0x10,               // Length
+                            )
+                        IRQNoFlags ()
+                            {13}
+                    })
+                }
+
+                Device (UAR1)
+                {
+                    Name (_UID, One)  // _UID: Unique ID
+                    Name (_HID, EisaId ("PNP0501"))  // _HID: Hardware ID
+                    Method (_STA, 0, NotSerialized)  // _STA: Status
+                    {
+                        Return (DSTA (Zero))
+                    }
+
+                    Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
+                    {
+                        DCNT (Zero, Zero)
+                    }
+
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        Return (DCRS (Zero, Zero))
+                    }
+
+                    Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+                    {
+                        DSRS (Arg0, Zero)
+                    }
+
+                    Method (_PRS, 0, NotSerialized)  // _PRS: Possible Resource Settings
+                    {
+                        Return (CMPR)
+                    }
+
+                    Name (CMPR, ResourceTemplate ()
+                    {
+                        StartDependentFn (0x00, 0x00)
+                        {
+                            IO (Decode16,
+                                0x03F8,             // Range Minimum
+                                0x03F8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {4}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x03F8,             // Range Minimum
+                                0x03F8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x02F8,             // Range Minimum
+                                0x02F8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x03E8,             // Range Minimum
+                                0x03E8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x02E8,             // Range Minimum
+                                0x02E8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {}
+                        }
+                        EndDependentFn ()
+                    })
+                }
+
+                Device (UAR2)
+                {
+                    Name (_UID, 0x02)  // _UID: Unique ID
+                    Method (_HID, 0, NotSerialized)  // _HID: Hardware ID
+                    {
+                        Return (UHID (One))
+                    }
+
+                    Method (_STA, 0, NotSerialized)  // _STA: Status
+                    {
+                        Return (DSTA (One))
+                    }
+
+                    Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
+                    {
+                        DCNT (One, Zero)
+                    }
+
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        Return (DCRS (One, One))
+                    }
+
+                    Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+                    {
+                        DSRS (Arg0, One)
+                    }
+
+                    Method (_PRS, 0, NotSerialized)  // _PRS: Possible Resource Settings
+                    {
+                        Return (CMPR)
+                    }
+
+                    Name (CMPR, ResourceTemplate ()
+                    {
+                        StartDependentFn (0x00, 0x00)
+                        {
+                            IO (Decode16,
+                                0x02F8,             // Range Minimum
+                                0x02F8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x03F8,             // Range Minimum
+                                0x03F8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x02F8,             // Range Minimum
+                                0x02F8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x03E8,             // Range Minimum
+                                0x03E8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x02E8,             // Range Minimum
+                                0x02E8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x03F8,             // Range Minimum
+                                0x03F8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {0,1,2,3}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x02F8,             // Range Minimum
+                                0x02F8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {0,1,2,3}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x03E8,             // Range Minimum
+                                0x03E8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {0,1,2,3}
+                        }
+                        StartDependentFnNoPri ()
+                        {
+                            IO (Decode16,
+                                0x02E8,             // Range Minimum
+                                0x02E8,             // Range Maximum
+                                0x01,               // Alignment
+                                0x08,               // Length
+                                )
+                            IRQNoFlags ()
+                                {3,4,5,6,7,10,11,12}
+                            DMA (Compatibility, NotBusMaster, Transfer8, )
+                                {0,1,2,3}
+                        }
+                        EndDependentFn ()
+                    })
+                }
+
+                Device (SIOR)
+                {
+                    Name (_HID, EisaId ("PNP0C02"))  // _HID: Hardware ID
+                    Method (_UID, 0, NotSerialized)  // _UID: Unique ID
+                    {
+                        Return (SPIO)
+                    }
+
+                    Name (CRS, ResourceTemplate ()
+                    {
+                        IO (Decode16,
+                            0x0000,             // Range Minimum
+                            0x0000,             // Range Maximum
+                            0x00,               // Alignment
+                            0x00,               // Length
+                            _Y05)
+                        IO (Decode16,
+                            0x0000,             // Range Minimum
+                            0x0000,             // Range Maximum
+                            0x00,               // Alignment
+                            0x00,               // Length
+                            _Y06)
+                        IO (Decode16,
+                            0x0000,             // Range Minimum
+                            0x0000,             // Range Maximum
+                            0x00,               // Alignment
+                            0x00,               // Length
+                            _Y07)
+                    })
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        If (LAnd (LNotEqual (SPIO, 0x03F0), LGreater (SPIO, 0xF0)))
+                        {
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.SIOR._Y05._MIN, GP10)  // _MIN: Minimum Base Address
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.SIOR._Y05._MAX, GP11)  // _MAX: Maximum Base Address
+                            CreateByteField (CRS, \_SB.PCI0.SBRG.SIOR._Y05._LEN, GPL1)  // _LEN: Length
+                            Store (SPIO, GP10)
+                            Store (SPIO, GP11)
+                            Store (0x02, GPL1)
+                        }
+
+                        If (IOSB)
+                        {
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.SIOR._Y06._MIN, GP20)  // _MIN: Minimum Base Address
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.SIOR._Y06._MAX, GP21)  // _MAX: Maximum Base Address
+                            CreateByteField (CRS, \_SB.PCI0.SBRG.SIOR._Y06._LEN, GPL2)  // _LEN: Length
+                            Store (IOSB, GP20)
+                            Store (IOSB, GP21)
+                            Store (IOSL, GPL2)
+                        }
+
+                        If (IOHB)
+                        {
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.SIOR._Y07._MIN, GP30)  // _MIN: Minimum Base Address
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.SIOR._Y07._MAX, GP31)  // _MAX: Maximum Base Address
+                            CreateByteField (CRS, \_SB.PCI0.SBRG.SIOR._Y07._LEN, GPL3)  // _LEN: Length
+                            Store (IOHB, GP30)
+                            Store (IOHB, GP31)
+                            Store (IOHL, GPL3)
+                        }
+
+                        Return (CRS)
+                    }
+                }
+
+                Name (DCAT, Package (0x16)
+                {
+                    0x02, 
+                    0x03, 
+                    One, 
+                    Zero, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF, 
+                    0x07, 
+                    0x09, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF, 
+                    0xFF
+                })
+                Method (ENFG, 1, NotSerialized)
+                {
+                    Store (0x87, INDX)
+                    Store (0x87, INDX)
+                    Store (Arg0, LDN)
+                }
+
+                Method (EXFG, 0, NotSerialized)
+                {
+                    Store (0xAA, INDX)
+                }
+
+                Method (LPTM, 1, NotSerialized)
+                {
+                    ENFG (CGLD (Arg0))
+                    And (OPT0, 0x02, Local0)
+                    EXFG ()
+                    Return (Local0)
+                }
+
+                Method (UHID, 1, NotSerialized)
+                {
+                    If (LEqual (Arg0, One))
+                    {
+                        ENFG (CGLD (Arg0))
+                        And (OPT1, 0x38, Local0)
+                        EXFG ()
+                        If (Local0)
+                        {
+                            Return (0x1005D041)
+                        }
+                    }
+
+                    Return (0x0105D041)
+                }
+
+                Method (SIOK, 1, NotSerialized)
+                {
+                    ENFG (0x0A)
+                    And (0xFF, OPT3, OPT3)
+                    And (Arg0, One, Local0)
+                    Or (OPT2, Local0, OPT2)
+                    Store (And (Arg0, One), ACTR)
+                    EXFG ()
+                }
+
+                Name (KBFG, One)
+                Name (MSFG, One)
+                Name (U1FG, One)
+                Name (U2FG, One)
+                OperationRegion (KBRW, SystemIO, 0x60, 0x05)
+                Field (KBRW, ByteAcc, NoLock, Preserve)
+                {
+                    KP60,   8, 
+                    Offset (0x04), 
+                    KP64,   8
+                }
+
+                OperationRegion (KB64, SystemIO, 0x64, One)
+                Field (KB64, ByteAcc, NoLock, Preserve)
+                {
+                        ,   1, 
+                    KRDY,   1, 
+                    Offset (0x01)
+                }
+
+                Method (PS2K._PSW, 1, NotSerialized)  // _PSW: Power State Wake
+                {
+                    If (LNot (LOr (LEqual (OSFL (), One), LEqual (OSFL (), 0x02))))
+                    {
+                        If (Arg0)
+                        {
+                            Store (One, KBFG)
+                        }
+                        Else
+                        {
+                            Store (Zero, KBFG)
+                        }
+                    }
+                }
+
+                Method (PS2M._PSW, 1, NotSerialized)  // _PSW: Power State Wake
+                {
+                    If (LNot (LOr (LEqual (OSFL (), One), LEqual (OSFL (), 0x02))))
+                    {
+                        If (Arg0)
+                        {
+                            Store (One, MSFG)
+                        }
+                        Else
+                        {
+                            Store (Zero, MSFG)
+                        }
+                    }
+                }
+
+                Method (SIOS, 1, NotSerialized)
+                {
+                    If (LEqual (Arg0, One))
+                    {
+                        ENFG (0x09)
+                        And (OPT3, 0x1F, OPT3)
+                        Or (OPT3, 0x20, OPT3)
+                        If (LEqual (CHID, 0xA0))
+                        {
+                            And (OPT3, 0x1F, OPT3)
+                            Or (OPT3, 0x80, OPT3)
+                        }
+
+                        EXFG ()
+                    }
+
+                    If (LEqual (Arg0, 0x03))
+                    {
+                        ENFG (0x09)
+                        And (OPT3, 0x1F, OPT3)
+                        Or (OPT3, 0xC0, OPT3)
+                        EXFG ()
+                    }
+
+                    If (LOr (LEqual (Arg0, 0x04), LEqual (Arg0, 0x05)))
+                    {
+                        ENFG (0x09)
+                        And (OPT3, 0x1F, OPT3)
+                        Or (OPT3, Zero, OPT3)
+                        EXFG ()
+                    }
+                }
+
+                Method (SIOW, 1, NotSerialized)
+                {
+                    ENFG (0x09)
+                    And (OPT3, 0x1F, OPT3)
+                    Or (OPT3, 0x40, OPT3)
+                    EXFG ()
+                }
+
+                Method (SIOH, 0, NotSerialized)
+                {
+                    Store ("SIOH", Debug)
+                    ENFG (0x0A)
+                    If (And (OPT3, 0x10))
+                    {
+                        Notify (PS2K, 0x02)
+                    }
+
+                    If (And (OPT3, 0x20))
+                    {
+                        Notify (PS2M, 0x02)
+                    }
+
+                    SIOK (Zero)
+                }
+
+                OperationRegion (IOID, SystemIO, SPIO, 0x02)
+                Field (IOID, ByteAcc, NoLock, Preserve)
+                {
+                    INDX,   8, 
+                    DATA,   8
+                }
+
+                IndexField (INDX, DATA, ByteAcc, NoLock, Preserve)
+                {
+                    Offset (0x07), 
+                    LDN,    8, 
+                    Offset (0x20), 
+                    CHID,   8, 
+                    Offset (0x22), 
+                    FDCP,   1, 
+                        ,   2, 
+                    LPTP,   1, 
+                    URAP,   1, 
+                    URBP,   1, 
+                    Offset (0x30), 
+                    ACTR,   8, 
+                    Offset (0x60), 
+                    IOAH,   8, 
+                    IOAL,   8, 
+                    IOH2,   8, 
+                    IOL2,   8, 
+                    Offset (0x70), 
+                    INTR,   8, 
+                    Offset (0x74), 
+                    DMCH,   8, 
+                    Offset (0xE0), 
+                    CRE0,   8, 
+                    CRE1,   8, 
+                    CRE2,   8, 
+                    CRE3,   8, 
+                    CRE4,   8, 
+                    CRE5,   8, 
+                    CRE6,   8, 
+                    Offset (0xF0), 
+                    OPT0,   8, 
+                    OPT1,   8, 
+                    OPT2,   8, 
+                    OPT3,   8, 
+                    OPT4,   8, 
+                    Offset (0xF6), 
+                    OPT6,   8
+                }
+
+                Method (CGLD, 1, NotSerialized)
+                {
+                    Return (DerefOf (Index (DCAT, Arg0)))
+                }
+
+                Method (DSTA, 1, NotSerialized)
+                {
+                    ENFG (CGLD (Arg0))
+                    Store (ACTR, Local0)
+                    EXFG ()
+                    If (LEqual (Local0, 0xFF))
+                    {
+                        Return (Zero)
+                    }
+
+                    And (Local0, One, Local0)
+                    Or (IOST, ShiftLeft (Local0, Arg0), IOST)
+                    If (Local0)
+                    {
+                        Return (0x0F)
+                    }
+                    Else
+                    {
+                        If (And (ShiftLeft (One, Arg0), IOST))
+                        {
+                            Return (0x0D)
+                        }
+                        Else
+                        {
+                            Return (Zero)
+                        }
+                    }
+                }
+
+                Method (DCNT, 2, NotSerialized)
+                {
+                    ENFG (CGLD (Arg0))
+                    ShiftLeft (IOAH, 0x08, Local1)
+                    Or (IOAL, Local1, Local1)
+                    If (LAnd (LLess (DMCH, 0x04), LNotEqual (And (DMCH, 0x03, 
+                        Local1), Zero)))
+                    {
+                        RDMA (Arg0, Arg1, Increment (Local1))
+                    }
+
+                    Store (Arg1, ACTR)
+                    RRIO (Arg0, Arg1, Local1, 0x08)
+                    EXFG ()
+                }
+
+                Name (CRS1, ResourceTemplate ()
+                {
+                    IO (Decode16,
+                        0x0000,             // Range Minimum
+                        0x0000,             // Range Maximum
+                        0x01,               // Alignment
+                        0x00,               // Length
+                        _Y0A)
+                    IRQNoFlags (_Y08)
+                        {}
+                    DMA (Compatibility, NotBusMaster, Transfer8, _Y09)
+                        {}
+                })
+                CreateWordField (CRS1, \_SB.PCI0.SBRG._Y08._INT, IRQM)  // _INT: Interrupts
+                CreateByteField (CRS1, \_SB.PCI0.SBRG._Y09._DMA, DMAM)  // _DMA: Direct Memory Access
+                CreateWordField (CRS1, \_SB.PCI0.SBRG._Y0A._MIN, IO11)  // _MIN: Minimum Base Address
+                CreateWordField (CRS1, \_SB.PCI0.SBRG._Y0A._MAX, IO12)  // _MAX: Maximum Base Address
+                CreateByteField (CRS1, \_SB.PCI0.SBRG._Y0A._LEN, LEN1)  // _LEN: Length
+                Name (CRS2, ResourceTemplate ()
+                {
+                    IO (Decode16,
+                        0x0000,             // Range Minimum
+                        0x0000,             // Range Maximum
+                        0x01,               // Alignment
+                        0x00,               // Length
+                        _Y0D)
+                    IO (Decode16,
+                        0x0000,             // Range Minimum
+                        0x0000,             // Range Maximum
+                        0x01,               // Alignment
+                        0x00,               // Length
+                        _Y0E)
+                    IRQNoFlags (_Y0B)
+                        {6}
+                    DMA (Compatibility, NotBusMaster, Transfer8, _Y0C)
+                        {2}
+                })
+                CreateWordField (CRS2, \_SB.PCI0.SBRG._Y0B._INT, IRQE)  // _INT: Interrupts
+                CreateByteField (CRS2, \_SB.PCI0.SBRG._Y0C._DMA, DMAE)  // _DMA: Direct Memory Access
+                CreateWordField (CRS2, \_SB.PCI0.SBRG._Y0D._MIN, IO21)  // _MIN: Minimum Base Address
+                CreateWordField (CRS2, \_SB.PCI0.SBRG._Y0D._MAX, IO22)  // _MAX: Maximum Base Address
+                CreateByteField (CRS2, \_SB.PCI0.SBRG._Y0D._LEN, LEN2)  // _LEN: Length
+                CreateWordField (CRS2, \_SB.PCI0.SBRG._Y0E._MIN, IO31)  // _MIN: Minimum Base Address
+                CreateWordField (CRS2, \_SB.PCI0.SBRG._Y0E._MAX, IO32)  // _MAX: Maximum Base Address
+                CreateByteField (CRS2, \_SB.PCI0.SBRG._Y0E._LEN, LEN3)  // _LEN: Length
+                Method (DCRS, 2, NotSerialized)
+                {
+                    ENFG (CGLD (Arg0))
+                    ShiftLeft (IOAH, 0x08, IO11)
+                    Or (IOAL, IO11, IO11)
+                    Store (IO11, IO12)
+                    Subtract (FindSetRightBit (IO11), One, Local0)
+                    ShiftLeft (One, Local0, LEN1)
+                    If (INTR)
+                    {
+                        ShiftLeft (One, INTR, IRQM)
+                    }
+                    Else
+                    {
+                        Store (Zero, IRQM)
+                    }
+
+                    If (LOr (LGreater (DMCH, 0x03), LEqual (Arg1, Zero)))
+                    {
+                        Store (Zero, DMAM)
+                    }
+                    Else
+                    {
+                        And (DMCH, 0x03, Local1)
+                        ShiftLeft (One, Local1, DMAM)
+                    }
+
+                    EXFG ()
+                    Return (CRS1)
+                }
+
+                Method (DSRS, 2, NotSerialized)
+                {
+                    CreateWordField (Arg0, 0x09, IRQM)
+                    CreateByteField (Arg0, 0x0C, DMAM)
+                    CreateWordField (Arg0, 0x02, IO11)
+                    ENFG (CGLD (Arg1))
+                    ShiftLeft (IOAH, 0x08, Local1)
+                    Or (IOAL, Local1, Local1)
+                    RRIO (Arg1, Zero, Local1, 0x08)
+                    RRIO (Arg1, One, IO11, 0x08)
+                    And (IO11, 0xFF, IOAL)
+                    ShiftRight (IO11, 0x08, IOAH)
+                    If (IRQM)
+                    {
+                        FindSetRightBit (IRQM, Local0)
+                        Subtract (Local0, One, INTR)
+                    }
+                    Else
+                    {
+                        Store (Zero, INTR)
+                    }
+
+                    If (DMAM)
+                    {
+                        FindSetRightBit (DMAM, Local0)
+                        Subtract (Local0, One, DMCH)
+                    }
+                    Else
+                    {
+                        Store (0x04, DMCH)
+                    }
+
+                    EXFG ()
+                    DCNT (Arg1, One)
+                }
+
+                Device (HPET)
+                {
+                    Name (_HID, EisaId ("PNP0103"))  // _HID: Hardware ID
+                    Name (CRS, ResourceTemplate ()
+                    {
+                        Memory32Fixed (ReadOnly,
+                            0xFED00000,         // Address Base
+                            0x00000400,         // Address Length
+                            _Y0F)
+                    })
+                    Method (_STA, 0, NotSerialized)  // _STA: Status
+                    {
+                        Return (0x0F)
+                    }
+
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        CreateDWordField (CRS, \_SB.PCI0.SBRG.HPET._Y0F._BAS, HPT)  // _BAS: Base Address
+                        Store (0xFED00000, HPT)
+                        Return (CRS)
+                    }
+                }
+
+                Device (^PCIE)
+                {
+                    Name (_HID, EisaId ("PNP0C02"))  // _HID: Hardware ID
+                    Name (_UID, 0x11)  // _UID: Unique ID
+                    Name (CRS, ResourceTemplate ()
+                    {
+                        Memory32Fixed (ReadOnly,
+                            0xE0000000,         // Address Base
+                            0x10000000,         // Address Length
+                            _Y10)
+                    })
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        CreateDWordField (CRS, \_SB.PCI0.PCIE._Y10._BAS, BAS1)  // _BAS: Base Address
+                        CreateDWordField (CRS, \_SB.PCI0.PCIE._Y10._LEN, LEN1)  // _LEN: Length
+                        Store (PCIB, BAS1)
+                        Store (PCIL, LEN1)
+                        Return (CRS)
+                    }
+                }
+
+                Device (OMSC)
+                {
+                    Name (_HID, EisaId ("PNP0C02"))  // _HID: Hardware ID
+                    Name (_UID, Zero)  // _UID: Unique ID
+                    Name (CRS, ResourceTemplate ()
+                    {
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y11)
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y12)
+                    })
+                    Name (CRS1, ResourceTemplate ()
+                    {
+                        FixedIO (
+                            0x0060,             // Address
+                            0x01,               // Length
+                            )
+                        FixedIO (
+                            0x0064,             // Address
+                            0x01,               // Length
+                            )
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y13)
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y14)
+                    })
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        If (APIC)
+                        {
+                            CreateDWordField (CRS, \_SB.PCI0.SBRG.OMSC._Y11._LEN, ML01)  // _LEN: Length
+                            CreateDWordField (CRS, \_SB.PCI0.SBRG.OMSC._Y11._BAS, MB01)  // _BAS: Base Address
+                            CreateDWordField (CRS, \_SB.PCI0.SBRG.OMSC._Y12._LEN, ML02)  // _LEN: Length
+                            CreateDWordField (CRS, \_SB.PCI0.SBRG.OMSC._Y12._BAS, MB02)  // _BAS: Base Address
+                            Store (0xFEC00000, MB01)
+                            Store (0x1000, ML01)
+                            Store (0xFEE00000, MB02)
+                            Store (0x1000, ML02)
+                            CreateDWordField (CRS1, \_SB.PCI0.SBRG.OMSC._Y13._LEN, ML03)  // _LEN: Length
+                            CreateDWordField (CRS1, \_SB.PCI0.SBRG.OMSC._Y13._BAS, MB03)  // _BAS: Base Address
+                            CreateDWordField (CRS1, \_SB.PCI0.SBRG.OMSC._Y14._LEN, ML04)  // _LEN: Length
+                            CreateDWordField (CRS1, \_SB.PCI0.SBRG.OMSC._Y14._BAS, MB04)  // _BAS: Base Address
+                            Store (0xFEC00000, MB03)
+                            Store (0x1000, ML03)
+                            Store (0xFEE00000, MB04)
+                            Store (0x1000, ML04)
+                        }
+
+                        ShiftLeft (0x05, 0x0A, Local0)
+                        If (And (IOST, Local0))
+                        {
+                            Return (CRS)
+                        }
+                        Else
+                        {
+                            Return (CRS1)
+                        }
+                    }
+                }
+
+                Device (^^RMEM)
+                {
+                    Name (_HID, EisaId ("PNP0C01"))  // _HID: Hardware ID
+                    Name (_UID, One)  // _UID: Unique ID
+                    Name (CRS, ResourceTemplate ()
+                    {
+                        Memory32Fixed (ReadWrite,
+                            0x00000000,         // Address Base
+                            0x000A0000,         // Address Length
+                            )
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y15)
+                        Memory32Fixed (ReadOnly,
+                            0x000E0000,         // Address Base
+                            0x00020000,         // Address Length
+                            _Y16)
+                        Memory32Fixed (ReadWrite,
+                            0x00100000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y17)
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y18)
+                    })
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        CreateDWordField (CRS, \_SB.RMEM._Y15._BAS, BAS1)  // _BAS: Base Address
+                        CreateDWordField (CRS, \_SB.RMEM._Y15._LEN, LEN1)  // _LEN: Length
+                        CreateDWordField (CRS, \_SB.RMEM._Y16._BAS, BAS2)  // _BAS: Base Address
+                        CreateDWordField (CRS, \_SB.RMEM._Y16._LEN, LEN2)  // _LEN: Length
+                        CreateDWordField (CRS, \_SB.RMEM._Y17._LEN, LEN3)  // _LEN: Length
+                        CreateDWordField (CRS, \_SB.RMEM._Y18._BAS, BAS4)  // _BAS: Base Address
+                        CreateDWordField (CRS, \_SB.RMEM._Y18._LEN, LEN4)  // _LEN: Length
+                        If (OSFL ()) {}
+                        Else
+                        {
+                            If (MG1B)
+                            {
+                                If (LGreater (MG1B, 0x000C0000))
+                                {
+                                    Store (0x000C0000, BAS1)
+                                    Subtract (MG1B, BAS1, LEN1)
+                                }
+                            }
+                            Else
+                            {
+                                Store (0x000C0000, BAS1)
+                                Store (0x00020000, LEN1)
+                            }
+
+                            If (Add (MG1B, MG1L, Local0))
+                            {
+                                Store (Local0, BAS2)
+                                Subtract (0x00100000, BAS2, LEN2)
+                            }
+                        }
+
+                        Subtract (MG2B, 0x00100000, LEN3)
+                        Store (MH1B, BAS4)
+                        Subtract (Zero, BAS4, LEN4)
+                        Return (CRS)
+                    }
+                }
+
+                Device (RMSC)
+                {
+                    Name (_HID, EisaId ("PNP0C02"))  // _HID: Hardware ID
+                    Name (_UID, 0x10)  // _UID: Unique ID
+                    Name (CRS, ResourceTemplate ()
+                    {
+                        IO (Decode16,
+                            0x0010,             // Range Minimum
+                            0x0010,             // Range Maximum
+                            0x00,               // Alignment
+                            0x10,               // Length
+                            )
+                        IO (Decode16,
+                            0x0022,             // Range Minimum
+                            0x0022,             // Range Maximum
+                            0x00,               // Alignment
+                            0x1E,               // Length
+                            )
+                        IO (Decode16,
+                            0x0062,             // Range Minimum
+                            0x0062,             // Range Maximum
+                            0x00,               // Alignment
+                            0x02,               // Length
+                            )
+                        IO (Decode16,
+                            0x0065,             // Range Minimum
+                            0x0065,             // Range Maximum
+                            0x00,               // Alignment
+                            0x0B,               // Length
+                            )
+                        IO (Decode16,
+                            0x0072,             // Range Minimum
+                            0x0072,             // Range Maximum
+                            0x00,               // Alignment
+                            0x0E,               // Length
+                            )
+                        IO (Decode16,
+                            0x0080,             // Range Minimum
+                            0x0080,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x0084,             // Range Minimum
+                            0x0084,             // Range Maximum
+                            0x00,               // Alignment
+                            0x03,               // Length
+                            )
+                        IO (Decode16,
+                            0x0088,             // Range Minimum
+                            0x0088,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x008C,             // Range Minimum
+                            0x008C,             // Range Maximum
+                            0x00,               // Alignment
+                            0x03,               // Length
+                            )
+                        IO (Decode16,
+                            0x0090,             // Range Minimum
+                            0x0090,             // Range Maximum
+                            0x00,               // Alignment
+                            0x10,               // Length
+                            )
+                        IO (Decode16,
+                            0x00A2,             // Range Minimum
+                            0x00A2,             // Range Maximum
+                            0x00,               // Alignment
+                            0x1E,               // Length
+                            )
+                        IO (Decode16,
+                            0x00B1,             // Range Minimum
+                            0x00B1,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x00E0,             // Range Minimum
+                            0x00E0,             // Range Maximum
+                            0x00,               // Alignment
+                            0x10,               // Length
+                            )
+                        IO (Decode16,
+                            0x04D0,             // Range Minimum
+                            0x04D0,             // Range Maximum
+                            0x00,               // Alignment
+                            0x02,               // Length
+                            )
+                        IO (Decode16,
+                            0x040B,             // Range Minimum
+                            0x040B,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x04D6,             // Range Minimum
+                            0x04D6,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x0C00,             // Range Minimum
+                            0x0C00,             // Range Maximum
+                            0x00,               // Alignment
+                            0x02,               // Length
+                            )
+                        IO (Decode16,
+                            0x0C14,             // Range Minimum
+                            0x0C14,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x0C50,             // Range Minimum
+                            0x0C50,             // Range Maximum
+                            0x00,               // Alignment
+                            0x02,               // Length
+                            )
+                        IO (Decode16,
+                            0x0C52,             // Range Minimum
+                            0x0C52,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x0C6C,             // Range Minimum
+                            0x0C6C,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x0C6F,             // Range Minimum
+                            0x0C6F,             // Range Maximum
+                            0x00,               // Alignment
+                            0x01,               // Length
+                            )
+                        IO (Decode16,
+                            0x0CD0,             // Range Minimum
+                            0x0CD0,             // Range Maximum
+                            0x00,               // Alignment
+                            0x02,               // Length
+                            )
+                        IO (Decode16,
+                            0x0CD2,             // Range Minimum
+                            0x0CD2,             // Range Maximum
+                            0x00,               // Alignment
+                            0x02,               // Length
+                            )
+                        IO (Decode16,
+                            0x0CD4,             // Range Minimum
+                            0x0CD4,             // Range Maximum
+                            0x00,               // Alignment
+                            0x02,               // Length
+                            )
+                        IO (Decode16,
+                            0x0CD6,             // Range Minimum
+                            0x0CD6,             // Range Maximum
+                            0x00,               // Alignment
+                            0x02,               // Length
+                            )
+                        IO (Decode16,
+                            0x0CD8,             // Range Minimum
+                            0x0CD8,             // Range Maximum
+                            0x00,               // Alignment
+                            0x08,               // Length
+                            )
+                        IO (Decode16,
+                            0x0000,             // Range Minimum
+                            0x0000,             // Range Maximum
+                            0x00,               // Alignment
+                            0x00,               // Length
+                            _Y19)
+                        IO (Decode16,
+                            0x0000,             // Range Minimum
+                            0x0000,             // Range Maximum
+                            0x00,               // Alignment
+                            0x00,               // Length
+                            _Y1C)
+                        IO (Decode16,
+                            0x0000,             // Range Minimum
+                            0x0000,             // Range Maximum
+                            0x00,               // Alignment
+                            0x00,               // Length
+                            _Y1B)
+                        IO (Decode16,
+                            0x0000,             // Range Minimum
+                            0x0000,             // Range Maximum
+                            0x00,               // Alignment
+                            0x00,               // Length
+                            _Y1A)
+                        IO (Decode16,
+                            0x0900,             // Range Minimum
+                            0x0900,             // Range Maximum
+                            0x00,               // Alignment
+                            0x10,               // Length
+                            )
+                        IO (Decode16,
+                            0x0910,             // Range Minimum
+                            0x0910,             // Range Maximum
+                            0x00,               // Alignment
+                            0x10,               // Length
+                            )
+                        IO (Decode16,
+                            0xFE00,             // Range Minimum
+                            0xFE00,             // Range Maximum
+                            0x00,               // Alignment
+                            0xFF,               // Length
+                            )
+                        IO (Decode16,
+                            0x0060,             // Range Minimum
+                            0x0060,             // Range Maximum
+                            0x00,               // Alignment
+                            0x00,               // Length
+                            _Y1D)
+                        IO (Decode16,
+                            0x0064,             // Range Minimum
+                            0x0064,             // Range Maximum
+                            0x00,               // Alignment
+                            0x00,               // Length
+                            _Y1E)
+                        Memory32Fixed (ReadOnly,
+                            0xFFB80000,         // Address Base
+                            0x00080000,         // Address Length
+                            )
+                        Memory32Fixed (ReadOnly,
+                            0xFEC10000,         // Address Base
+                            0x00000020,         // Address Length
+                            )
+                    })
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        CreateWordField (CRS, \_SB.PCI0.SBRG.RMSC._Y19._MIN, GP00)  // _MIN: Minimum Base Address
+                        CreateWordField (CRS, \_SB.PCI0.SBRG.RMSC._Y19._MAX, GP01)  // _MAX: Maximum Base Address
+                        CreateByteField (CRS, \_SB.PCI0.SBRG.RMSC._Y19._LEN, GP0L)  // _LEN: Length
+                        Store (PMBS, GP00)
+                        Store (PMBS, GP01)
+                        Store (PMLN, GP0L)
+                        If (SMBB)
+                        {
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.RMSC._Y1A._MIN, GP10)  // _MIN: Minimum Base Address
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.RMSC._Y1A._MAX, GP11)  // _MAX: Maximum Base Address
+                            CreateByteField (CRS, \_SB.PCI0.SBRG.RMSC._Y1A._LEN, GP1L)  // _LEN: Length
+                            Store (SMBB, GP10)
+                            Store (SMBB, GP11)
+                            Store (SMBL, GP1L)
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.RMSC._Y1B._MIN, GPB0)  // _MIN: Minimum Base Address
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.RMSC._Y1B._MAX, GPB1)  // _MAX: Maximum Base Address
+                            CreateByteField (CRS, \_SB.PCI0.SBRG.RMSC._Y1B._LEN, GPBL)  // _LEN: Length
+                            Store (SMB0, GPB0)
+                            Store (SMB0, GPB1)
+                            Store (SMBM, GPBL)
+                        }
+
+                        If (GPBS)
+                        {
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.RMSC._Y1C._MIN, GP20)  // _MIN: Minimum Base Address
+                            CreateWordField (CRS, \_SB.PCI0.SBRG.RMSC._Y1C._MAX, GP21)  // _MAX: Maximum Base Address
+                            CreateByteField (CRS, \_SB.PCI0.SBRG.RMSC._Y1C._LEN, GP2L)  // _LEN: Length
+                            Store (GPBS, GP20)
+                            Store (GPBS, GP21)
+                            Store (GPLN, GP2L)
+                        }
+
+                        ShiftLeft (One, 0x0A, Local0)
+                        ShiftLeft (One, 0x0C, Local1)
+                        Or (And (IOST, Local0), And (IOST, Local1), Local0)
+                        CreateByteField (CRS, \_SB.PCI0.SBRG.RMSC._Y1D._LEN, KBL0)  // _LEN: Length
+                        CreateByteField (CRS, \_SB.PCI0.SBRG.RMSC._Y1E._LEN, KBL1)  // _LEN: Length
+                        If (LEqual (Local0, Zero))
+                        {
+                            Store (One, KBL0)
+                            Store (One, KBL1)
+                        }
+
+                        Return (CRS)
+                    }
+                }
+            }
+
+            Device (P0PC)
+            {
+                Name (_ADR, 0x00140004)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x04, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR0C)
+                    }
+
+                    Return (PR0C)
+                }
+            }
+
+            Device (UHC1)
+            {
+                Name (_ADR, 0x00120000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x0B, 0x04))
+                }
+            }
+
+            Device (UHC2)
+            {
+                Name (_ADR, 0x00120001)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x0B, 0x04))
+                }
+            }
+
+            Device (UHC3)
+            {
+                Name (_ADR, 0x00120002)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x0B, 0x04))
+                }
+            }
+
+            Device (USB4)
+            {
+                Name (_ADR, 0x00130000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x0B, 0x04))
+                }
+            }
+
+            Device (UHC5)
+            {
+                Name (_ADR, 0x00130001)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x0B, 0x04))
+                }
+            }
+
+            Device (UHC6)
+            {
+                Name (_ADR, 0x00130002)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x0B, 0x04))
+                }
+            }
+
+            Device (UHC7)
+            {
+                Name (_ADR, 0x00140005)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x0B, 0x04))
+                }
+            }
+
+            Device (SATA)
+            {
+                Name (_ADR, 0x00110000)  // _ADR: Address
+                Method (_INI, 0, NotSerialized)  // _INI: Initialize
+                {
+                }
+
+                OperationRegion (SACS, PCI_Config, Zero, 0x40)
+                Field (SACS, AnyAcc, NoLock, Preserve)
+                {
+                    Offset (0x24), 
+                    STB5,   32
+                }
+
+                Name (SPTM, Buffer (0x14)
+                {
+                    /* 0000 */   0x78, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00,
+                    /* 0008 */   0x78, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00,
+                    /* 0010 */   0x1F, 0x00, 0x00, 0x00
+                })
+                Device (PRID)
+                {
+                    Name (_ADR, Zero)  // _ADR: Address
+                    Method (_GTM, 0, NotSerialized)  // _GTM: Get Timing Mode
+                    {
+                        Return (SPTM)
+                    }
+
+                    Method (_STM, 3, NotSerialized)  // _STM: Set Timing Mode
+                    {
+                    }
+
+                    Method (_STA, 0, NotSerialized)  // _STA: Status
+                    {
+                        If (LEqual (STCL, 0x0101))
+                        {
+                            Store (0x0F, Local1)
+                        }
+                        Else
+                        {
+                            Store (Zero, Local1)
+                        }
+
+                        Return (Local1)
+                    }
+
+                    Name (PRIS, Zero)
+                    Method (_PS0, 0, NotSerialized)  // _PS0: Power State 0
+                    {
+                        OperationRegion (BAR, SystemMemory, STB5, 0x0400)
+                        Field (BAR, AnyAcc, NoLock, Preserve)
+                        {
+                            Offset (0x120), 
+                                ,   7, 
+                            PMBY,   1, 
+                            Offset (0x128), 
+                            PMS0,   4, 
+                            Offset (0x129), 
+                            PMS1,   4, 
+                            Offset (0x220), 
+                                ,   7, 
+                            PSBY,   1, 
+                            Offset (0x228), 
+                            PSS0,   4, 
+                            Offset (0x229), 
+                            PSS1,   4, 
+                            Offset (0x2A0), 
+                                ,   7
+                        }
+
+                        If (LAnd (LLessEqual (OSTY, 0x15), LGreaterEqual (OSTY, 0x12)))
+                        {
+                            If (PMS1)
+                            {
+                                Store (0x32, Local0)
+                                While (LAnd (LEqual (PMBY, One), Local0))
+                                {
+                                    Sleep (0xFA)
+                                    Decrement (Local0)
+                                }
+                            }
+
+                            If (PSS1)
+                            {
+                                Store (0x32, Local0)
+                                While (LAnd (LEqual (PSBY, One), Local0))
+                                {
+                                    Sleep (0xFA)
+                                    Decrement (Local0)
+                                }
+                            }
+                        }
+
+                        Store (Zero, PRIS)
+                    }
+
+                    Method (_PS3, 0, NotSerialized)  // _PS3: Power State 3
+                    {
+                        Store (0x03, PRIS)
+                    }
+
+                    Method (_PSC, 0, NotSerialized)  // _PSC: Power State Current
+                    {
+                        Return (PRIS)
+                    }
+
+                    Device (P_D0)
+                    {
+                        Name (_ADR, Zero)  // _ADR: Address
+                        Method (_STA, 0, NotSerialized)  // _STA: Status
+                        {
+                            OperationRegion (BAR, SystemMemory, STB5, 0x0400)
+                            Field (BAR, AnyAcc, NoLock, Preserve)
+                            {
+                                Offset (0x128), 
+                                PMS0,   4, 
+                                Offset (0x129), 
+                                PMS1,   4
+                            }
+
+                            If (Not (LEqual (PMS1, Zero)))
+                            {
+                                Return (0x0F)
+                            }
+                            Else
+                            {
+                                Return (Zero)
+                            }
+                        }
+
+                        Name (S12P, Zero)
+                        Method (_PS0, 0, NotSerialized)  // _PS0: Power State 0
+                        {
+                            OperationRegion (BAR, SystemMemory, STB5, 0x0400)
+                            Field (BAR, AnyAcc, NoLock, Preserve)
+                            {
+                                Offset (0x120), 
+                                    ,   7, 
+                                PMBY,   1
+                            }
+
+                            Store (0x32, Local0)
+                            While (LAnd (LEqual (PMBY, One), Local0))
+                            {
+                                Sleep (0xFA)
+                                Decrement (Local0)
+                            }
+
+                            Store (Zero, S12P)
+                        }
+
+                        Method (_PS3, 0, NotSerialized)  // _PS3: Power State 3
+                        {
+                            Store (0x03, S12P)
+                        }
+
+                        Method (_PSC, 0, NotSerialized)  // _PSC: Power State Current
+                        {
+                            Return (S12P)
+                        }
+                    }
+
+                    Device (P_D1)
+                    {
+                        Name (_ADR, One)  // _ADR: Address
+                        Method (_STA, 0, NotSerialized)  // _STA: Status
+                        {
+                            OperationRegion (BAR, SystemMemory, STB5, 0x0400)
+                            Field (BAR, AnyAcc, NoLock, Preserve)
+                            {
+                                Offset (0x228), 
+                                PSS0,   4, 
+                                Offset (0x229), 
+                                PSS1,   4
+                            }
+
+                            If (Not (LEqual (PSS1, Zero)))
+                            {
+                                Return (0x0F)
+                            }
+                            Else
+                            {
+                                Return (Zero)
+                            }
+                        }
+
+                        Name (S12P, Zero)
+                        Method (_PS0, 0, NotSerialized)  // _PS0: Power State 0
+                        {
+                            OperationRegion (BAR, SystemMemory, STB5, 0x0400)
+                            Field (BAR, AnyAcc, NoLock, Preserve)
+                            {
+                                Offset (0x220), 
+                                    ,   7, 
+                                PSBY,   1
+                            }
+
+                            Store (0x32, Local0)
+                            While (LAnd (LEqual (PSBY, One), Local0))
+                            {
+                                Sleep (0xFA)
+                                Decrement (Local0)
+                            }
+
+                            Store (Zero, S12P)
+                        }
+
+                        Method (_PS3, 0, NotSerialized)  // _PS3: Power State 3
+                        {
+                            Store (0x03, S12P)
+                        }
+
+                        Method (_PSC, 0, NotSerialized)  // _PSC: Power State Current
+                        {
+                            Return (S12P)
+                        }
+                    }
+                }
+
+                Device (SECD)
+                {
+                    Name (_ADR, One)  // _ADR: Address
+                    Method (_GTM, 0, NotSerialized)  // _GTM: Get Timing Mode
+                    {
+                        Return (SPTM)
+                    }
+
+                    Method (_STM, 3, NotSerialized)  // _STM: Set Timing Mode
+                    {
+                    }
+
+                    Name (SECS, Zero)
+                    Method (_STA, 0, NotSerialized)  // _STA: Status
+                    {
+                        If (LEqual (STCL, 0x0101))
+                        {
+                            Store (0x0F, Local1)
+                        }
+                        Else
+                        {
+                            Store (Zero, Local1)
+                        }
+
+                        Return (Local1)
+                    }
+
+                    Method (_PS0, 0, NotSerialized)  // _PS0: Power State 0
+                    {
+                        OperationRegion (BAR, SystemMemory, STB5, 0x0400)
+                        Field (BAR, AnyAcc, NoLock, Preserve)
+                        {
+                            Offset (0x1A0), 
+                                ,   7, 
+                            SMBY,   1, 
+                            Offset (0x1A8), 
+                            SMS0,   4, 
+                            Offset (0x1A9), 
+                            SMS1,   4, 
+                            Offset (0x2A0), 
+                                ,   7, 
+                            SSBY,   1, 
+                            Offset (0x2A8), 
+                            SSS0,   4, 
+                            Offset (0x2A9), 
+                            SSS1,   4, 
+                            Offset (0x2AC)
+                        }
+
+                        If (LAnd (LLessEqual (OSTY, 0x15), LGreaterEqual (OSTY, 0x12)))
+                        {
+                            If (SMS1)
+                            {
+                                Store (0x32, Local0)
+                                While (LAnd (LEqual (SMBY, One), Local0))
+                                {
+                                    Sleep (0xFA)
+                                    Decrement (Local0)
+                                }
+                            }
+
+                            If (SSS1)
+                            {
+                                Store (0x32, Local0)
+                                While (LAnd (LEqual (SSBY, One), Local0))
+                                {
+                                    Sleep (0xFA)
+                                    Decrement (Local0)
+                                }
+                            }
+                        }
+
+                        Store (Zero, SECS)
+                    }
+
+                    Method (_PS3, 0, NotSerialized)  // _PS3: Power State 3
+                    {
+                        Store (0x03, SECS)
+                    }
+
+                    Method (_PSC, 0, NotSerialized)  // _PSC: Power State Current
+                    {
+                        Return (SECS)
+                    }
+
+                    Device (S_D0)
+                    {
+                        Name (_ADR, Zero)  // _ADR: Address
+                        Method (_STA, 0, NotSerialized)  // _STA: Status
+                        {
+                            OperationRegion (BAR, SystemMemory, STB5, 0x0400)
+                            Field (BAR, AnyAcc, NoLock, Preserve)
+                            {
+                                Offset (0x1A8), 
+                                SMS0,   4, 
+                                Offset (0x1A9), 
+                                SMS1,   4
+                            }
+
+                            If (Not (LEqual (SMS1, Zero)))
+                            {
+                                Return (0x0F)
+                            }
+                            Else
+                            {
+                                Return (Zero)
+                            }
+                        }
+
+                        Name (S12P, Zero)
+                        Method (_PS0, 0, NotSerialized)  // _PS0: Power State 0
+                        {
+                            OperationRegion (BAR, SystemMemory, STB5, 0x1000)
+                            Field (BAR, AnyAcc, NoLock, Preserve)
+                            {
+                                Offset (0x1A0), 
+                                    ,   7, 
+                                SMBY,   1
+                            }
+
+                            Store (0x32, Local0)
+                            While (LAnd (LEqual (SMBY, One), Local0))
+                            {
+                                Sleep (0xFA)
+                                Decrement (Local0)
+                            }
+
+                            Store (Zero, S12P)
+                        }
+
+                        Method (_PS3, 0, NotSerialized)  // _PS3: Power State 3
+                        {
+                            Store (0x03, S12P)
+                        }
+
+                        Method (_PSC, 0, NotSerialized)  // _PSC: Power State Current
+                        {
+                            Return (S12P)
+                        }
+                    }
+
+                    Device (S_D1)
+                    {
+                        Name (_ADR, One)  // _ADR: Address
+                        Method (_STA, 0, NotSerialized)  // _STA: Status
+                        {
+                            OperationRegion (BAR, SystemMemory, STB5, 0x0400)
+                            Field (BAR, AnyAcc, NoLock, Preserve)
+                            {
+                                Offset (0x2A8), 
+                                SSS0,   4, 
+                                Offset (0x2A9), 
+                                SSS1,   4
+                            }
+
+                            If (Not (LEqual (SSS1, Zero)))
+                            {
+                                Return (0x0F)
+                            }
+                            Else
+                            {
+                                Return (Zero)
+                            }
+                        }
+
+                        Name (S12P, Zero)
+                        Method (_PS0, 0, NotSerialized)  // _PS0: Power State 0
+                        {
+                            OperationRegion (BAR, SystemMemory, STB5, 0x0400)
+                            Field (BAR, AnyAcc, NoLock, Preserve)
+                            {
+                                Offset (0x2A0), 
+                                    ,   7, 
+                                SSBY,   1
+                            }
+
+                            Store (0x32, Local0)
+                            While (LAnd (LEqual (SSBY, One), Local0))
+                            {
+                                Sleep (0xFA)
+                                Decrement (Local0)
+                            }
+
+                            Store (Zero, S12P)
+                        }
+
+                        Method (_PS3, 0, NotSerialized)  // _PS3: Power State 3
+                        {
+                            Store (0x03, S12P)
+                        }
+
+                        Method (_PSC, 0, NotSerialized)  // _PSC: Power State Current
+                        {
+                            Return (S12P)
+                        }
+                    }
+                }
+            }
+        }
+
+        Device (PC40)
+        {
+            Name (_HID, EisaId ("PNP0A03"))  // _HID: Hardware ID
+            Name (_ADR, 0x00190001)  // _ADR: Address
+            Method (^BN40, 0, NotSerialized)
+            {
+                Return (0x40)
+            }
+
+            Method (_BBN, 0, NotSerialized)  // _BBN: BIOS Bus Number
+            {
+                Return (BN40 ())
+            }
+
+            Name (_UID, 0x40)  // _UID: Unique ID
+            Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+            {
+                If (PICM)
+                {
+                    Return (AR40)
+                }
+
+                Return (PR40)
+            }
+
+            Method (BN40, 0, NotSerialized)
+            {
+                Return (SEB1)
+            }
+
+            Method (_STA, 0, NotSerialized)  // _STA: Status
+            {
+                If (LNotEqual (SEB1, Zero))
+                {
+                    Return (0x0F)
+                }
+
+                Return (Zero)
+            }
+
+            Name (CRS, ResourceTemplate ()
+            {
+                WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+                    0x0000,             // Granularity
+                    0x0000,             // Range Minimum
+                    0x003F,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0100,             // Length
+                    ,, _Y1F)
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x0D00,             // Range Minimum
+                    0xFFFF,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0xF300,             // Length
+                    ,, _Y20, TypeStatic)
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x03B0,             // Range Minimum
+                    0x03BB,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x000C,             // Length
+                    ,, _Y21, TypeStatic)
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x03C0,             // Range Minimum
+                    0x03DF,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0020,             // Length
+                    ,, _Y22, TypeStatic)
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x000A0000,         // Range Minimum
+                    0x000BFFFF,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x00020000,         // Length
+                    ,, _Y23, AddressRangeMemory, TypeStatic)
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x00000000,         // Range Minimum
+                    0x00000000,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x00000000,         // Length
+                    ,, _Y24, AddressRangeMemory, TypeStatic)
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x00000000,         // Range Minimum
+                    0x00000000,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x00000000,         // Length
+                    ,, _Y25, AddressRangeMemory, TypeStatic)
+            })
+            CreateWordField (CRS, \_SB.PC40._Y1F._MIN, MINB)  // _MIN: Minimum Base Address
+            CreateWordField (CRS, \_SB.PC40._Y1F._MAX, MAXB)  // _MAX: Maximum Base Address
+            CreateWordField (CRS, \_SB.PC40._Y1F._LEN, LENB)  // _LEN: Length
+            CreateWordField (CRS, \_SB.PC40._Y20._MIN, MINI)  // _MIN: Minimum Base Address
+            CreateWordField (CRS, \_SB.PC40._Y20._MAX, MAXI)  // _MAX: Maximum Base Address
+            CreateWordField (CRS, \_SB.PC40._Y20._LEN, LENI)  // _LEN: Length
+            CreateWordField (CRS, \_SB.PC40._Y21._MIN, MIN1)  // _MIN: Minimum Base Address
+            CreateWordField (CRS, \_SB.PC40._Y21._MAX, MAX1)  // _MAX: Maximum Base Address
+            CreateWordField (CRS, \_SB.PC40._Y21._LEN, LEN1)  // _LEN: Length
+            CreateWordField (CRS, \_SB.PC40._Y22._MIN, MIN2)  // _MIN: Minimum Base Address
+            CreateWordField (CRS, \_SB.PC40._Y22._MAX, MAX2)  // _MAX: Maximum Base Address
+            CreateWordField (CRS, \_SB.PC40._Y22._LEN, LEN2)  // _LEN: Length
+            CreateDWordField (CRS, \_SB.PC40._Y23._MIN, MIN4)  // _MIN: Minimum Base Address
+            CreateDWordField (CRS, \_SB.PC40._Y23._MAX, MAX4)  // _MAX: Maximum Base Address
+            CreateDWordField (CRS, \_SB.PC40._Y23._LEN, LEN4)  // _LEN: Length
+            CreateDWordField (CRS, \_SB.PC40._Y24._MIN, MIN5)  // _MIN: Minimum Base Address
+            CreateDWordField (CRS, \_SB.PC40._Y24._MAX, MAX5)  // _MAX: Maximum Base Address
+            CreateDWordField (CRS, \_SB.PC40._Y24._LEN, LEN5)  // _LEN: Length
+            CreateDWordField (CRS, \_SB.PC40._Y25._MIN, MIN6)  // _MIN: Minimum Base Address
+            CreateDWordField (CRS, \_SB.PC40._Y25._MAX, MAX6)  // _MAX: Maximum Base Address
+            CreateDWordField (CRS, \_SB.PC40._Y25._LEN, LEN6)  // _LEN: Length
+            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+            {
+                Store (SEB1, Local0)
+                Store (Local0, MINB)
+                Store (SUB1, Local0)
+                Store (Local0, MAXB)
+                Subtract (SUB1, SEB1, Local0)
+                Add (Local0, One, LENB)
+                Store (IOB1, MINI)
+                Store (IOL1, LENI)
+                Store (IOL1, Local0)
+                Add (MINI, Decrement (Local0), MAXI)
+                If (LEqual (VGAR, One))
+                {
+                    Noop
+                }
+                Else
+                {
+                    Store (Zero, MIN4)
+                    Store (Zero, MAX4)
+                    Store (Zero, LEN4)
+                    Store (Zero, MIN1)
+                    Store (Zero, MAX1)
+                    Store (Zero, LEN1)
+                    Store (Zero, MIN2)
+                    Store (Zero, MAX2)
+                    Store (Zero, LEN2)
+                }
+
+                Store (GP4S, MIN5)
+                Store (GP4L, LEN5)
+                Store (GP4L, Local0)
+                If (Local0)
+                {
+                    Add (MIN5, Decrement (Local0), MAX5)
+                }
+
+                Store (GP5S, MIN6)
+                Store (GP5L, LEN6)
+                Store (GP5L, Local0)
+                Add (MIN6, Decrement (Local0), MAX6)
+                Return (CRS)
+            }
+
+            Name (SUPP, Zero)
+            Name (CTRL, Zero)
+            Method (_OSC, 4, NotSerialized)  // _OSC: Operating System Capabilities
+            {
+                If (LEqual (Arg0, Buffer (0x10)
+                        {
+                            /* 0000 */   0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40,
+                            /* 0008 */   0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66
+                        }))
+                {
+                    CreateDWordField (Arg3, Zero, CDW1)
+                    CreateDWordField (Arg3, 0x04, CDW2)
+                    CreateDWordField (Arg3, 0x08, CDW3)
+                    Store (CDW2, SUPP)
+                    Store (CDW3, CTRL)
+                    If (LNotEqual (And (SUPP, 0x16), 0x16))
+                    {
+                        And (CTRL, 0x1E, CTRL)
+                    }
+
+                    And (CTRL, 0x1D, CTRL)
+                    If (Not (And (CDW1, One)))
+                    {
+                        If (And (CTRL, One)) {}
+                        If (And (CTRL, 0x04)) {}
+                        If (And (CTRL, 0x10)) {}
+                    }
+
+                    If (LNotEqual (Arg1, One))
+                    {
+                        Or (CDW1, 0x08, CDW1)
+                    }
+
+                    If (LNotEqual (CDW3, CTRL))
+                    {
+                        Or (CDW1, 0x10, CDW1)
+                    }
+
+                    Store (CTRL, CDW3)
+                    Return (Arg3)
+                }
+                Else
+                {
+                    Or (CDW1, 0x04, CDW1)
+                    Return (Arg3)
+                }
+            }
+
+            Device (RD8B)
+            {
+                Name (_ADR, Zero)  // _ADR: Address
+                OperationRegion (NB2, PCI_Config, Zero, 0x0100)
+                Field (NB2, AnyAcc, NoLock, Preserve)
+                {
+                    Offset (0x60), 
+                    MI,     32, 
+                    MD,     32, 
+                    Offset (0x94), 
+                    HI,     32, 
+                    HD,     32, 
+                    Offset (0xF8), 
+                    API,    32, 
+                    APD,    32
+                }
+
+                Device (NMEM)
+                {
+                    Name (_HID, EisaId ("PNP0C02"))  // _HID: Hardware ID
+                    Name (_UID, 0x44)  // _UID: Unique ID
+                    Name (CRS, ResourceTemplate ()
+                    {
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y26)
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y27)
+                    })
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        CreateDWordField (CRS, \_SB.PC40.RD8B.NMEM._Y26._BAS, BAS1)  // _BAS: Base Address
+                        CreateDWordField (CRS, \_SB.PC40.RD8B.NMEM._Y26._LEN, LEN1)  // _LEN: Length
+                        Store (0x3C, MI)
+                        Store (MD, Local0)
+                        If (And (Local0, 0x40))
+                        {
+                            Store (0x3A, MI)
+                            And (MD, 0xFFFFFF00, BAS1)
+                            ShiftLeft (And (MD, 0xFF), 0x17, LEN1)
+                        }
+
+                        CreateDWordField (CRS, \_SB.PC40.RD8B.NMEM._Y27._BAS, BAS2)  // _BAS: Base Address
+                        CreateDWordField (CRS, \_SB.PC40.RD8B.NMEM._Y27._LEN, LEN2)  // _LEN: Length
+                        Store (Zero, API)
+                        Store (APD, Local1)
+                        If (And (Local1, One))
+                        {
+                            Store (0x0100, LEN2)
+                            Store (One, API)
+                            And (APD, 0xFFFFFF00, BAS2)
+                        }
+
+                        Return (CRS)
+                    }
+                }
+            }
+
+            Device (IOMB)
+            {
+                Name (_ADR, 0x02)  // _ADR: Address
+                OperationRegion (NBF2, PCI_Config, Zero, 0x0100)
+                Field (NBF2, AnyAcc, NoLock, Preserve)
+                {
+                    DID,    32, 
+                    Offset (0x44), 
+                    MBAS,   32
+                }
+
+                Device (UMEM)
+                {
+                    Name (_HID, EisaId ("PNP0C02"))  // _HID: Hardware ID
+                    Name (_UID, 0x45)  // _UID: Unique ID
+                    Name (CRS, ResourceTemplate ()
+                    {
+                        Memory32Fixed (ReadOnly,
+                            0x00000000,         // Address Base
+                            0x00000000,         // Address Length
+                            _Y28)
+                    })
+                    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+                    {
+                        CreateDWordField (CRS, \_SB.PC40.IOMB.UMEM._Y28._BAS, BAS3)  // _BAS: Base Address
+                        CreateDWordField (CRS, \_SB.PC40.IOMB.UMEM._Y28._LEN, LEN3)  // _LEN: Length
+                        If (LNotEqual (DID, Ones))
+                        {
+                            Store (0x4000, LEN3)
+                            And (MBAS, 0xFFFFFF00, BAS3)
+                        }
+
+                        Return (CRS)
+                    }
+                }
+            }
+
+            Device (PC12)
+            {
+                Name (_ADR, 0x00020000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR42)
+                    }
+
+                    Return (PR42)
+                }
+            }
+
+            Device (PC13)
+            {
+                Name (_ADR, 0x00030000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR43)
+                    }
+
+                    Return (PR43)
+                }
+            }
+
+            Device (PC14)
+            {
+                Name (_ADR, 0x00040000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR44)
+                    }
+
+                    Return (PR44)
+                }
+            }
+
+            Device (PC15)
+            {
+                Name (_ADR, 0x00050000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR45)
+                    }
+
+                    Return (PR45)
+                }
+            }
+
+            Device (PC16)
+            {
+                Name (_ADR, 0x00060000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR46)
+                    }
+
+                    Return (PR46)
+                }
+            }
+
+            Device (PC17)
+            {
+                Name (_ADR, 0x00070000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR47)
+                    }
+
+                    Return (PR47)
+                }
+            }
+
+            Device (PC19)
+            {
+                Name (_ADR, 0x00090000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR49)
+                    }
+
+                    Return (PR49)
+                }
+            }
+
+            Device (PC1A)
+            {
+                Name (_ADR, 0x000A0000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR4A)
+                    }
+
+                    Return (PR4A)
+                }
+            }
+
+            Device (PC1B)
+            {
+                Name (_ADR, 0x000B0000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR4B)
+                    }
+
+                    Return (PR4B)
+                }
+            }
+
+            Device (PC1C)
+            {
+                Name (_ADR, 0x000C0000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+
+                Method (_PRT, 0, NotSerialized)  // _PRT: PCI Routing Table
+                {
+                    If (PICM)
+                    {
+                        Return (AR4C)
+                    }
+
+                    Return (PR4C)
+                }
+            }
+
+            Device (PC1D)
+            {
+                Name (_ADR, 0x000D0000)  // _ADR: Address
+                Method (_PRW, 0, NotSerialized)  // _PRW: Power Resources for Wake
+                {
+                    Return (GPRW (0x18, 0x04))
+                }
+            }
+        }
+
+        Scope (\_GPE)
+        {
+            Method (_L18, 0, NotSerialized)  // _Lxx: Level-Triggered GPE
+            {
+                Notify (\_SB.PCI0.PC02, 0x02)
+                Notify (\_SB.PCI0.PC03, 0x02)
+                Notify (\_SB.PCI0.PC04, 0x02)
+                Notify (\_SB.PCI0.PC05, 0x02)
+                Notify (\_SB.PCI0.PC06, 0x02)
+                Notify (\_SB.PCI0.PC07, 0x02)
+                Notify (\_SB.PCI0.PC09, 0x02)
+                Notify (\_SB.PCI0.PC0A, 0x02)
+                Notify (\_SB.PCI0.PC0B, 0x02)
+                Notify (\_SB.PCI0.PC0C, 0x02)
+                Notify (\_SB.PCI0.PC0D, 0x02)
+                Notify (\_SB.PC40.PC12, 0x02)
+                Notify (\_SB.PC40.PC13, 0x02)
+                Notify (\_SB.PC40.PC14, 0x02)
+                Notify (\_SB.PC40.PC15, 0x02)
+                Notify (\_SB.PC40.PC16, 0x02)
+                Notify (\_SB.PC40.PC17, 0x02)
+                Notify (\_SB.PC40.PC19, 0x02)
+                Notify (\_SB.PC40.PC1A, 0x02)
+                Notify (\_SB.PC40.PC1B, 0x02)
+                Notify (\_SB.PC40.PC1C, 0x02)
+                Notify (\_SB.PC40.PC1D, 0x02)
+                Notify (\_SB.PWRB, 0x02)
+            }
+
+            Method (_L1B, 0, NotSerialized)  // _Lxx: Level-Triggered GPE
+            {
+                Notify (\_SB.PCI0.SBAZ, 0x02)
+                Notify (\_SB.PWRB, 0x02)
+            }
+
+            Method (_L04, 0, NotSerialized)  // _Lxx: Level-Triggered GPE
+            {
+                Notify (\_SB.PCI0.P0PC, 0x02)
+                Notify (\_SB.PWRB, 0x02)
+            }
+
+            Method (_L0B, 0, NotSerialized)  // _Lxx: Level-Triggered GPE
+            {
+                Notify (\_SB.PCI0.UHC1, 0x02)
+                Notify (\_SB.PCI0.UHC2, 0x02)
+                Notify (\_SB.PCI0.UHC3, 0x02)
+                Notify (\_SB.PCI0.USB4, 0x02)
+                Notify (\_SB.PCI0.UHC5, 0x02)
+                Notify (\_SB.PCI0.UHC6, 0x02)
+                Notify (\_SB.PCI0.UHC7, 0x02)
+                Notify (\_SB.PWRB, 0x02)
+            }
+        }
+
+        Device (PWRB)
+        {
+            Name (_HID, EisaId ("PNP0C0C"))  // _HID: Hardware ID
+            Name (_UID, 0xAA)  // _UID: Unique ID
+            Name (_STA, 0x0B)  // _STA: Status
+        }
+    }
+
+    Scope (_SB)
+    {
+        OperationRegion (PIRQ, SystemIO, 0x0C00, 0x02)
+        Field (PIRQ, ByteAcc, NoLock, Preserve)
+        {
+            PIDX,   8, 
+            PDAT,   8
+        }
+
+        IndexField (PIDX, PDAT, ByteAcc, NoLock, Preserve)
+        {
+            PIRA,   8, 
+            PIRB,   8, 
+            PIRC,   8, 
+            PIRD,   8, 
+            PIRS,   8, 
+            Offset (0x09), 
+            PIRE,   8, 
+            PIRF,   8, 
+            PIRG,   8, 
+            PIRH,   8
+        }
+
+        OperationRegion (KBDD, SystemIO, 0x64, One)
+        Field (KBDD, ByteAcc, NoLock, Preserve)
+        {
+            PD64,   8
+        }
+
+        Method (IRQC, 0, NotSerialized)
+        {
+            Store (Zero, PIRA)
+            Store (Zero, PIRB)
+            Store (Zero, PIRC)
+            Store (Zero, PIRD)
+            Store (PD64, Local1)
+            Store (Zero, PIRE)
+            Store (Zero, PIRF)
+            Store (Zero, PIRG)
+            Store (Zero, PIRH)
+        }
+
+        Name (BUFA, ResourceTemplate ()
+        {
+            IRQ (Level, ActiveLow, Shared, )
+                {15}
+        })
+        Name (IPRA, ResourceTemplate ()
+        {
+            IRQ (Level, ActiveLow, Shared, )
+                {5,10,11}
+        })
+        Name (IPRB, ResourceTemplate ()
+        {
+            IRQ (Level, ActiveLow, Shared, )
+                {5,10,11}
+        })
+        Name (IPRC, ResourceTemplate ()
+        {
+            IRQ (Level, ActiveLow, Shared, )
+                {5,10,11}
+        })
+        Name (IPRD, ResourceTemplate ()
+        {
+            IRQ (Level, ActiveLow, Shared, )
+                {5,10,11}
+        })
+        Device (LNKA)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))  // _HID: Hardware ID
+            Name (_UID, One)  // _UID: Unique ID
+            Method (_STA, 0, NotSerialized)  // _STA: Status
+            {
+                If (PIRA)
+                {
+                    Return (0x0B)
+                }
+                Else
+                {
+                    Return (0x09)
+                }
+            }
+
+            Method (_PRS, 0, NotSerialized)  // _PRS: Possible Resource Settings
+            {
+                Return (PRSA)
+            }
+
+            Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
+            {
+                Store (Zero, PIRA)
+            }
+
+            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+            {
+                CreateWordField (BUFA, One, IRQX)
+                ShiftLeft (One, PIRA, IRQX)
+                Return (BUFA)
+            }
+
+            Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+            {
+                CreateWordField (Arg0, One, IRA)
+                FindSetRightBit (IRA, Local0)
+                Decrement (Local0)
+                Store (Local0, PIRA)
+            }
+        }
+
+        Device (LNKB)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))  // _HID: Hardware ID
+            Name (_UID, 0x02)  // _UID: Unique ID
+            Method (_STA, 0, NotSerialized)  // _STA: Status
+            {
+                If (PIRB)
+                {
+                    Return (0x0B)
+                }
+                Else
+                {
+                    Return (0x09)
+                }
+            }
+
+            Method (_PRS, 0, NotSerialized)  // _PRS: Possible Resource Settings
+            {
+                Return (PRSB)
+            }
+
+            Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
+            {
+                Store (Zero, PIRB)
+            }
+
+            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+            {
+                CreateWordField (BUFA, One, IRQX)
+                ShiftLeft (One, PIRB, IRQX)
+                Return (BUFA)
+            }
+
+            Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+            {
+                CreateWordField (Arg0, One, IRA)
+                FindSetRightBit (IRA, Local0)
+                Decrement (Local0)
+                Store (Local0, PIRB)
+            }
+        }
+
+        Device (LNKC)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))  // _HID: Hardware ID
+            Name (_UID, 0x03)  // _UID: Unique ID
+            Method (_STA, 0, NotSerialized)  // _STA: Status
+            {
+                If (PIRC)
+                {
+                    Return (0x0B)
+                }
+                Else
+                {
+                    Return (0x09)
+                }
+            }
+
+            Method (_PRS, 0, NotSerialized)  // _PRS: Possible Resource Settings
+            {
+                Return (PRSC)
+            }
+
+            Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
+            {
+                Store (Zero, PIRC)
+            }
+
+            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+            {
+                CreateWordField (BUFA, One, IRQX)
+                ShiftLeft (One, PIRC, IRQX)
+                Return (BUFA)
+            }
+
+            Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+            {
+                CreateWordField (Arg0, One, IRA)
+                FindSetRightBit (IRA, Local0)
+                Decrement (Local0)
+                Store (Local0, PIRC)
+            }
+        }
+
+        Device (LNKD)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))  // _HID: Hardware ID
+            Name (_UID, 0x04)  // _UID: Unique ID
+            Method (_STA, 0, NotSerialized)  // _STA: Status
+            {
+                If (PIRD)
+                {
+                    Return (0x0B)
+                }
+                Else
+                {
+                    Return (0x09)
+                }
+            }
+
+            Method (_PRS, 0, NotSerialized)  // _PRS: Possible Resource Settings
+            {
+                Return (PRSD)
+            }
+
+            Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
+            {
+                Store (Zero, PIRD)
+            }
+
+            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+            {
+                CreateWordField (BUFA, One, IRQX)
+                ShiftLeft (One, PIRD, IRQX)
+                Return (BUFA)
+            }
+
+            Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+            {
+                CreateWordField (Arg0, One, IRA)
+                FindSetRightBit (IRA, Local0)
+                Decrement (Local0)
+                Store (Local0, PIRD)
+            }
+        }
+
+        Device (LNKE)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))  // _HID: Hardware ID
+            Name (_UID, 0x05)  // _UID: Unique ID
+            Method (_STA, 0, NotSerialized)  // _STA: Status
+            {
+                If (PIRE)
+                {
+                    Return (0x0B)
+                }
+                Else
+                {
+                    Return (0x09)
+                }
+            }
+
+            Method (_PRS, 0, NotSerialized)  // _PRS: Possible Resource Settings
+            {
+                Return (PRSE)
+            }
+
+            Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
+            {
+                Store (Zero, PIRE)
+            }
+
+            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+            {
+                CreateWordField (BUFA, One, IRQX)
+                ShiftLeft (One, PIRE, IRQX)
+                Return (BUFA)
+            }
+
+            Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+            {
+                CreateWordField (Arg0, One, IRA)
+                FindSetRightBit (PIRE, Local0)
+                Decrement (Local0)
+                Store (Local0, PIRE)
+            }
+        }
+
+        Device (LNKF)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))  // _HID: Hardware ID
+            Name (_UID, 0x02)  // _UID: Unique ID
+            Method (_STA, 0, NotSerialized)  // _STA: Status
+            {
+                If (PIRF)
+                {
+                    Return (0x0B)
+                }
+                Else
+                {
+                    Return (0x09)
+                }
+            }
+
+            Method (_PRS, 0, NotSerialized)  // _PRS: Possible Resource Settings
+            {
+                Return (PRSF)
+            }
+
+            Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
+            {
+                Store (Zero, PIRF)
+            }
+
+            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+            {
+                CreateWordField (BUFA, One, IRQX)
+                ShiftLeft (One, PIRF, IRQX)
+                Return (BUFA)
+            }
+
+            Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+            {
+                CreateWordField (Arg0, One, IRA)
+                FindSetRightBit (IRA, Local0)
+                Decrement (Local0)
+                Store (Local0, PIRF)
+            }
+        }
+
+        Device (LNKG)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))  // _HID: Hardware ID
+            Name (_UID, 0x03)  // _UID: Unique ID
+            Method (_STA, 0, NotSerialized)  // _STA: Status
+            {
+                If (PIRG)
+                {
+                    Return (0x0B)
+                }
+                Else
+                {
+                    Return (0x09)
+                }
+            }
+
+            Method (_PRS, 0, NotSerialized)  // _PRS: Possible Resource Settings
+            {
+                Return (PRSG)
+            }
+
+            Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
+            {
+                Store (Zero, PIRG)
+            }
+
+            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+            {
+                CreateWordField (BUFA, One, IRQX)
+                ShiftLeft (One, PIRG, IRQX)
+                Return (BUFA)
+            }
+
+            Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+            {
+                CreateWordField (Arg0, One, IRA)
+                FindSetRightBit (IRA, Local0)
+                Decrement (Local0)
+                Store (Local0, PIRG)
+            }
+        }
+
+        Device (LNKH)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))  // _HID: Hardware ID
+            Name (_UID, 0x04)  // _UID: Unique ID
+            Method (_STA, 0, NotSerialized)  // _STA: Status
+            {
+                If (PIRH)
+                {
+                    Return (0x0B)
+                }
+                Else
+                {
+                    Return (0x09)
+                }
+            }
+
+            Method (_PRS, 0, NotSerialized)  // _PRS: Possible Resource Settings
+            {
+                Return (PRSH)
+            }
+
+            Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
+            {
+                Store (Zero, PIRH)
+            }
+
+            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+            {
+                CreateWordField (BUFA, One, IRQX)
+                ShiftLeft (One, PIRH, IRQX)
+                Return (BUFA)
+            }
+
+            Method (_SRS, 1, NotSerialized)  // _SRS: Set Resource Settings
+            {
+                CreateWordField (Arg0, One, IRA)
+                FindSetRightBit (IRA, Local0)
+                Decrement (Local0)
+                Store (Local0, PIRH)
+            }
+        }
+    }
+
+    Scope (_SB)
+    {
+        Name (XCPD, Zero)
+        Name (XNPT, One)
+        Name (XCAP, 0x02)
+        Name (XDCP, 0x04)
+        Name (XDCT, 0x08)
+        Name (XDST, 0x0A)
+        Name (XLCP, 0x0C)
+        Name (XLCT, 0x10)
+        Name (XLST, 0x12)
+        Name (XSCP, 0x14)
+        Name (XSCT, 0x18)
+        Name (XSST, 0x1A)
+        Name (XRCT, 0x1C)
+        Mutex (MUTE, 0x00)
+        Method (RBPE, 1, NotSerialized)
+        {
+            Acquire (MUTE, 0x03E8)
+            Add (Arg0, PCIB, Local0)
+            OperationRegion (PCFG, SystemMemory, Local0, One)
+            Field (PCFG, ByteAcc, NoLock, Preserve)
+            {
+                XCFG,   8
+            }
+
+            Release (MUTE)
+            Return (XCFG)
+        }
+
+        Method (RWPE, 1, NotSerialized)
+        {
+            Acquire (MUTE, 0x03E8)
+            And (Arg0, 0xFFFFFFFE, Arg0)
+            Add (Arg0, PCIB, Local0)
+            OperationRegion (PCFG, SystemMemory, Local0, 0x02)
+            Field (PCFG, WordAcc, NoLock, Preserve)
+            {
+                XCFG,   16
+            }
+
+            Release (MUTE)
+            Return (XCFG)
+        }
+
+        Method (RDPE, 1, NotSerialized)
+        {
+            Acquire (MUTE, 0x03E8)
+            And (Arg0, 0xFFFFFFFC, Arg0)
+            Add (Arg0, PCIB, Local0)
+            OperationRegion (PCFG, SystemMemory, Local0, 0x04)
+            Field (PCFG, DWordAcc, NoLock, Preserve)
+            {
+                XCFG,   32
+            }
+
+            Release (MUTE)
+            Return (XCFG)
+        }
+
+        Method (WBPE, 2, NotSerialized)
+        {
+            Acquire (MUTE, 0x0FFF)
+            Add (Arg0, PCIB, Local0)
+            OperationRegion (PCFG, SystemMemory, Local0, One)
+            Field (PCFG, ByteAcc, NoLock, Preserve)
+            {
+                XCFG,   8
+            }
+
+            Store (Arg1, XCFG)
+            Release (MUTE)
+        }
+
+        Method (WWPE, 2, NotSerialized)
+        {
+            Acquire (MUTE, 0x03E8)
+            And (Arg0, 0xFFFFFFFE, Arg0)
+            Add (Arg0, PCIB, Local0)
+            OperationRegion (PCFG, SystemMemory, Local0, 0x02)
+            Field (PCFG, WordAcc, NoLock, Preserve)
+            {
+                XCFG,   16
+            }
+
+            Store (Arg1, XCFG)
+            Release (MUTE)
+        }
+
+        Method (WDPE, 2, NotSerialized)
+        {
+            Acquire (MUTE, 0x03E8)
+            And (Arg0, 0xFFFFFFFC, Arg0)
+            Add (Arg0, PCIB, Local0)
+            OperationRegion (PCFG, SystemMemory, Local0, 0x04)
+            Field (PCFG, DWordAcc, NoLock, Preserve)
+            {
+                XCFG,   32
+            }
+
+            Store (Arg1, XCFG)
+            Release (MUTE)
+        }
+
+        Method (RWDP, 3, NotSerialized)
+        {
+            Acquire (MUTE, 0x03E8)
+            And (Arg0, 0xFFFFFFFC, Arg0)
+            Add (Arg0, PCIB, Local0)
+            OperationRegion (PCFG, SystemMemory, Local0, 0x04)
+            Field (PCFG, DWordAcc, NoLock, Preserve)
+            {
+                XCFG,   32
+            }
+
+            And (XCFG, Arg2, Local1)
+            Or (Local1, Arg1, XCFG)
+            Release (MUTE)
+        }
+
+        Method (RPME, 1, NotSerialized)
+        {
+            Add (Arg0, 0x84, Local0)
+            Store (RDPE (Local0), Local1)
+            If (LEqual (Local1, Ones))
+            {
+                Return (Zero)
+            }
+            Else
+            {
+                If (LAnd (Local1, 0x00010000))
+                {
+                    WDPE (Local0, And (Local1, 0x00010000))
+                    Return (One)
+                }
+
+                Return (Zero)
+            }
+        }
+    }
+
+    Scope (_SB.PCI0)
+    {
+        Device (MI0)
+        {
+            Name (_HID, EisaId ("IPI0001"))  // _HID: Hardware ID
+            Name (_STR, Unicode ("IPMI_KCS"))  // _STR: Description String
+            Name (_UID, Zero)  // _UID: Unique ID
+            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
+            {
+                IO (Decode16,
+                    0x0CA8,             // Range Minimum
+                    0x0CA8,             // Range Maximum
+                    0x00,               // Alignment
+                    0x01,               // Length
+                    )
+                IO (Decode16,
+                    0x0CAC,             // Range Minimum
+                    0x0CAC,             // Range Maximum
+                    0x00,               // Alignment
+                    0x01,               // Length
+                    )
+            })
+            OperationRegion (BDA, SystemMemory, 0x04EB, One)
+            Field (BDA, ByteAcc, NoLock, Preserve)
+            {
+                VOF,    1
+            }
+
+            Method (_STA, 0, NotSerialized)  // _STA: Status
+            {
+                Store (OSYS (), Local7)
+                If (LGreaterEqual (OSYS (), 0x15))
+                {
+                    If (LNotEqual (VOF, One))
+                    {
+                        Return (0x0F)
+                    }
+                    Else
+                    {
+                        Return (Zero)
+                    }
+                }
+                Else
+                {
+                    Return (Zero)
+                }
+            }
+
+            Method (_IFT, 0, NotSerialized)  // _IFT: IPMI Interface Type
+            {
+                Return (One)
+            }
+
+            Method (_SRV, 0, NotSerialized)  // _SRV: IPMI Spec Revision
+            {
+                Return (0x0200)
+            }
+        }
+    }
+
+    Method (NPTS, 1, NotSerialized)
+    {
+    }
+
+    Method (NWAK, 1, NotSerialized)
+    {
+    }
+
+    Method (NB2S, 1, NotSerialized)
+    {
+    }
+
+    Method (NB2W, 1, NotSerialized)
+    {
+    }
+
+    Scope (_SB)
+    {
+        Method (_INI, 0, NotSerialized)  // _INI: Initialize
+        {
+            Store (OSFL (), OSTY)
+            If (LEqual (OSFL (), Zero))
+            {
+                Store (0x05, OSTY)
+            }
+
+            If (LEqual (OSFL (), 0x05))
+            {
+                Store (0x06, OSTY)
+            }
+        }
+
+        Scope (PCI0)
+        {
+            Name (CRS, ResourceTemplate ()
+            {
+                WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+                    0x0000,             // Granularity
+                    0x0000,             // Range Minimum
+                    0x0000,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0000,             // Length
+                    ,, _Y2A)
+                IO (Decode16,
+                    0x0CF8,             // Range Minimum
+                    0x0CF8,             // Range Maximum
+                    0x01,               // Alignment
+                    0x08,               // Length
+                    )
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x0000,             // Range Minimum
+                    0x03AF,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x03B0,             // Length
+                    ,, , TypeStatic)
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x03E0,             // Range Minimum
+                    0x0CF7,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0918,             // Length
+                    ,, , TypeStatic)
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x03B0,             // Range Minimum
+                    0x03BB,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x000C,             // Length
+                    ,, _Y29, TypeStatic)
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x03C0,             // Range Minimum
+                    0x03DF,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0020,             // Length
+                    ,, , TypeStatic)
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x0000,             // Range Minimum
+                    0x0000,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0000,             // Length
+                    ,, _Y2B, TypeStatic)
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x000A0000,         // Range Minimum
+                    0x000BFFFF,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x00020000,         // Length
+                    ,, , AddressRangeMemory, TypeStatic)
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x000C0000,         // Range Minimum
+                    0x000DFFFF,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x00020000,         // Length
+                    ,, _Y2C, AddressRangeMemory, TypeStatic)
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x00000000,         // Range Minimum
+                    0x00000000,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x00000000,         // Length
+                    ,, _Y2D, AddressRangeMemory, TypeStatic)
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x00000000,         // Range Minimum
+                    0x00000000,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x00000000,         // Length
+                    ,, _Y2E, AddressRangeMemory, TypeStatic)
+            })
+            CreateWordField (CRS, \_SB.PCI0._Y29._MIN, MIN1)  // _MIN: Minimum Base Address
+            CreateWordField (CRS, \_SB.PCI0._Y29._MAX, MAX1)  // _MAX: Maximum Base Address
+            CreateWordField (CRS, \_SB.PCI0._Y29._LEN, LEN1)  // _LEN: Length
+            CreateWordField (CRS, \_SB.PCI0._Y2A._MIN, B0MI)  // _MIN: Minimum Base Address
+            CreateWordField (CRS, \_SB.PCI0._Y2A._MAX, B0MX)  // _MAX: Maximum Base Address
+            CreateWordField (CRS, \_SB.PCI0._Y2A._LEN, B0LE)  // _LEN: Length
+            CreateWordField (CRS, \_SB.PCI0._Y2B._MIN, B0IN)  // _MIN: Minimum Base Address
+            CreateWordField (CRS, \_SB.PCI0._Y2B._MAX, B0IX)  // _MAX: Maximum Base Address
+            CreateWordField (CRS, \_SB.PCI0._Y2B._LEN, B0IL)  // _LEN: Length
+            CreateDWordField (CRS, \_SB.PCI0._Y2C._MIN, MIN5)  // _MIN: Minimum Base Address
+            CreateDWordField (CRS, \_SB.PCI0._Y2C._MAX, MAX5)  // _MAX: Maximum Base Address
+            CreateDWordField (CRS, \_SB.PCI0._Y2C._LEN, LEN5)  // _LEN: Length
+            CreateDWordField (CRS, \_SB.PCI0._Y2D._MIN, MIN6)  // _MIN: Minimum Base Address
+            CreateDWordField (CRS, \_SB.PCI0._Y2D._MAX, MAX6)  // _MAX: Maximum Base Address
+            CreateDWordField (CRS, \_SB.PCI0._Y2D._LEN, LEN6)  // _LEN: Length
+            CreateDWordField (CRS, \_SB.PCI0._Y2E._MIN, MIN7)  // _MIN: Minimum Base Address
+            CreateDWordField (CRS, \_SB.PCI0._Y2E._MAX, MAX7)  // _MAX: Maximum Base Address
+            CreateDWordField (CRS, \_SB.PCI0._Y2E._LEN, LEN7)  // _LEN: Length
+            Name (CR64, ResourceTemplate ()
+            {
+                WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+                    0x0000,             // Granularity
+                    0x0000,             // Range Minimum
+                    0x0000,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0000,             // Length
+                    ,, _Y30)
+                IO (Decode16,
+                    0x0CF8,             // Range Minimum
+                    0x0CF8,             // Range Maximum
+                    0x01,               // Alignment
+                    0x08,               // Length
+                    )
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x0000,             // Range Minimum
+                    0x03AF,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x03B0,             // Length
+                    ,, , TypeStatic)
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x03E0,             // Range Minimum
+                    0x0CF7,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0918,             // Length
+                    ,, , TypeStatic)
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x03B0,             // Range Minimum
+                    0x03BB,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x000C,             // Length
+                    ,, _Y2F, TypeStatic)
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x03C0,             // Range Minimum
+                    0x03DF,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0020,             // Length
+                    ,, , TypeStatic)
+                WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x0000,             // Granularity
+                    0x0000,             // Range Minimum
+                    0x0000,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0000,             // Length
+                    ,, _Y31, TypeStatic)
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x000A0000,         // Range Minimum
+                    0x000BFFFF,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x00020000,         // Length
+                    ,, , AddressRangeMemory, TypeStatic)
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x000C0000,         // Range Minimum
+                    0x000DFFFF,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x00020000,         // Length
+                    ,, _Y32, AddressRangeMemory, TypeStatic)
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x00000000,         // Range Minimum
+                    0x00000000,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x00000000,         // Length
+                    ,, _Y33, AddressRangeMemory, TypeStatic)
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x00000000,         // Range Minimum
+                    0x00000000,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x00000000,         // Length
+                    ,, _Y34, AddressRangeMemory, TypeStatic)
+                QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
+                    0x0000000000000000, // Granularity
+                    0x0000000000000000, // Range Minimum
+                    0x0000000000000000, // Range Maximum
+                    0x0000000000000000, // Translation Offset
+                    0x0000000000000000, // Length
+                    ,, _Y35, AddressRangeMemory, TypeStatic)
+            })
+            CreateWordField (CR64, \_SB.PCI0._Y2F._MIN, _MN1)  // _MIN: Minimum Base Address
+            CreateWordField (CR64, \_SB.PCI0._Y2F._MAX, _MX1)  // _MAX: Maximum Base Address
+            CreateWordField (CR64, \_SB.PCI0._Y2F._LEN, _LN1)  // _LEN: Length
+            CreateWordField (CR64, \_SB.PCI0._Y30._MIN, B6MI)  // _MIN: Minimum Base Address
+            CreateWordField (CR64, \_SB.PCI0._Y30._MAX, B6MX)  // _MAX: Maximum Base Address
+            CreateWordField (CR64, \_SB.PCI0._Y30._LEN, B6LE)  // _LEN: Length
+            CreateWordField (CR64, \_SB.PCI0._Y31._MIN, B6IN)  // _MIN: Minimum Base Address
+            CreateWordField (CR64, \_SB.PCI0._Y31._MAX, B6IX)  // _MAX: Maximum Base Address
+            CreateWordField (CR64, \_SB.PCI0._Y31._LEN, B6IL)  // _LEN: Length
+            CreateDWordField (CR64, \_SB.PCI0._Y32._MIN, _MN5)  // _MIN: Minimum Base Address
+            CreateDWordField (CR64, \_SB.PCI0._Y32._MAX, _MX5)  // _MAX: Maximum Base Address
+            CreateDWordField (CR64, \_SB.PCI0._Y32._LEN, _LN5)  // _LEN: Length
+            CreateDWordField (CR64, \_SB.PCI0._Y33._MIN, _MN6)  // _MIN: Minimum Base Address
+            CreateDWordField (CR64, \_SB.PCI0._Y33._MAX, _MX6)  // _MAX: Maximum Base Address
+            CreateDWordField (CR64, \_SB.PCI0._Y33._LEN, _LN6)  // _LEN: Length
+            CreateDWordField (CR64, \_SB.PCI0._Y34._MIN, _MN7)  // _MIN: Minimum Base Address
+            CreateDWordField (CR64, \_SB.PCI0._Y34._MAX, _MX7)  // _MAX: Maximum Base Address
+            CreateDWordField (CR64, \_SB.PCI0._Y34._LEN, _LN7)  // _LEN: Length
+            CreateDWordField (CR64, \_SB.PCI0._Y35._MIN, MN8L)  // _MIN: Minimum Base Address
+            CreateDWordField (CR64, Add (0xDE, 0x04), MN8H)
+            CreateDWordField (CR64, \_SB.PCI0._Y35._MAX, MX8L)  // _MAX: Maximum Base Address
+            CreateDWordField (CR64, Add (0xE6, 0x04), MX8H)
+            CreateDWordField (CR64, \_SB.PCI0._Y35._LEN, LN8L)  // _LEN: Length
+            CreateDWordField (CR64, Add (0xF6, 0x04), LN8H)
+            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+            {
+                Store (MG1L, Local0)
+                If (Local0)
+                {
+                    Store (MG1B, MIN5)
+                    Store (MG1L, LEN5)
+                    Add (MIN5, Decrement (Local0), MAX5)
+                }
+
+                Store (MG2B, MIN6)
+                Store (MG2L, LEN6)
+                Store (MG2L, Local0)
+                Add (MIN6, Decrement (Local0), MAX6)
+                Store (MG3B, MIN7)
+                Store (MG3L, LEN7)
+                Store (MG3L, Local0)
+                Add (MIN7, Decrement (Local0), MAX7)
+                If (LEqual (VGAR, Zero))
+                {
+                    Noop
+                }
+                Else
+                {
+                    Store (Zero, MIN1)
+                    Store (Zero, MAX1)
+                    Store (Zero, LEN1)
+                }
+
+                Store (SEB0, Local0)
+                Store (Local0, B0MI)
+                Store (SUB0, Local0)
+                Store (Local0, B0MX)
+                Subtract (SUB0, SEB0, Local0)
+                Add (Local0, One, B0LE)
+                Store (IOB0, B0IN)
+                Store (IOL0, B0IL)
+                Store (IOL0, Local0)
+                Add (B0IN, Decrement (Local0), B0IX)
+                Store (MIN5, _MN5)
+                Store (LEN5, _LN5)
+                Store (MAX5, _MX5)
+                Store (MIN6, _MN6)
+                Store (LEN6, _LN6)
+                Store (MAX6, _MX6)
+                Store (MIN7, _MN7)
+                Store (LEN7, _LN7)
+                Store (MAX7, _MX7)
+                Store (M4BL, MN8L)
+                Store (M4BH, MN8H)
+                Store (M4LL, Local0)
+                Store (Decrement (Local0), MX8L)
+                If (LEqual (M4LL, Zero))
+                {
+                    Store (M4LH, Local0)
+                    Store (Decrement (Local0), MX8H)
+                }
+                Else
+                {
+                    Store (M4LH, MX8H)
+                }
+
+                If (LLess (M4LL, M4BL))
+                {
+                    Store (M4LH, Local0)
+                    Subtract (Decrement (Local0), M4BH, LN8H)
+                    Store (M4LL, Local0)
+                    Add (Increment (Local0), Subtract (Ones, M4BL), LN8L)
+                }
+                Else
+                {
+                    Subtract (M4LL, M4BL, LN8L)
+                    Subtract (M4LH, M4BH, LN8H)
+                }
+
+                If (LEqual (VGAR, Zero))
+                {
+                    Noop
+                }
+                Else
+                {
+                    Store (Zero, _MN1)
+                    Store (Zero, _MX1)
+                    Store (Zero, _LN1)
+                }
+
+                Store (SEB0, Local0)
+                Store (Local0, B6MI)
+                Store (SUB0, Local0)
+                Store (Local0, B6MX)
+                Subtract (SUB0, SEB0, Local0)
+                Add (Local0, One, B6LE)
+                Store (IOB0, B6IN)
+                Store (IOL0, B6IL)
+                Store (IOL0, Local0)
+                Add (B6IN, Decrement (Local0), B6IX)
+                If (MR64)
+                {
+                    If (LGreaterEqual (OSYS (), 0x15))
+                    {
+                        Return (CR64)
+                    }
+                    Else
+                    {
+                        Return (CRS)
+                    }
+                }
+                Else
+                {
+                    Return (CRS)
+                }
+            }
+        }
+    }
+
+    Name (WOTB, Zero)
+    Name (WSSB, Zero)
+    Name (WAXB, Zero)
+    Method (_PTS, 1, NotSerialized)  // _PTS: Prepare To Sleep
+    {
+        Store (Arg0, DBG8)
+        PTS (Arg0)
+        Store (Zero, Index (WAKP, Zero))
+        Store (Zero, Index (WAKP, One))
+        If (LAnd (LEqual (Arg0, 0x04), LEqual (OSFL (), 0x02)))
+        {
+            Sleep (0x0BB8)
+        }
+
+        Store (ASSB, WSSB)
+        Store (AOTB, WOTB)
+        Store (AAXB, WAXB)
+        Store (Arg0, ASSB)
+        Store (OSFL (), AOTB)
+        Store (OSYS (), OSTP)
+        Store (Zero, AAXB)
+    }
+
+    Method (_WAK, 1, NotSerialized)  // _WAK: Wake
+    {
+        ShiftLeft (Arg0, 0x04, DBG8)
+        WAK (Arg0)
+        If (ASSB)
+        {
+            Store (WSSB, ASSB)
+            Store (WOTB, AOTB)
+            Store (WAXB, AAXB)
+        }
+
+        If (DerefOf (Index (WAKP, Zero)))
+        {
+            Store (Zero, Index (WAKP, One))
+        }
+        Else
+        {
+            Store (Arg0, Index (WAKP, One))
+        }
+
+        Return (WAKP)
+    }
+
+    Scope (_SB.PCI0)
+    {
+        Method (_INI, 0, NotSerialized)  // _INI: Initialize
+        {
+        }
+    }
+
+    Name (_S0, Package (0x04)  // _S0_: S0 System State
+    {
+        Zero, 
+        Zero, 
+        Zero, 
+        Zero
+    })
+    If (SS1)
+    {
+        Name (_S1, Package (0x04)  // _S1_: S1 System State
+        {
+            One, 
+            Zero, 
+            Zero, 
+            Zero
+        })
+    }
+
+    If (SS4)
+    {
+        Name (_S4, Package (0x04)  // _S4_: S4 System State
+        {
+            0x04, 
+            Zero, 
+            Zero, 
+            Zero
+        })
+    }
+
+    Name (_S5, Package (0x04)  // _S5_: S5 System State
+    {
+        0x05, 
+        Zero, 
+        Zero, 
+        Zero
+    })
+    Method (PTS, 1, NotSerialized)
+    {
+        If (Arg0)
+        {
+            \_SB.PCI0.SBRG.SIOS (Arg0)
+            NPTS (Arg0)
+            NB2S (Arg0)
+            SPTS (Arg0)
+            \_SB.PCI0.SBRG.EPTS (Arg0)
+        }
+    }
+
+    Method (WAK, 1, NotSerialized)
+    {
+        \_SB.PCI0.SBRG.SIOW (Arg0)
+        NWAK (Arg0)
+        NB2W (Arg0)
+        SWAK (Arg0)
+        \_SB.PCI0.SBRG.EWAK (Arg0)
+    }
+}
+
diff --git a/src/mainboard/tyan/s8226/fadt.c b/src/mainboard/tyan/s8226/fadt.c
new file mode 100644
index 0000000..0c63162
--- /dev/null
+++ b/src/mainboard/tyan/s8226/fadt.c
@@ -0,0 +1,174 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ */
+
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include "Platform.h" /*sb700 platform header*/
+
+#ifndef ACPI_BLK_BASE
+  #define ACPI_BLK_BASE	PM1_EVT_BLK_ADDRESS
+#endif
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+	acpi_header_t *header = &(fadt->header);
+
+	printk(BIOS_DEBUG, "ACPI_BLK_BASE: 0x%04x\n", ACPI_BLK_BASE);
+	/* Prepare the header */
+	memset((void *)fadt, 0, sizeof(acpi_fadt_t));
+	memcpy(header->signature, "FACP", 4);
+	header->length = 244;
+	header->revision = 3;
+	memcpy(header->oem_id, OEM_ID, 6);
+	memcpy(header->oem_table_id, "AMD     ", 8);
+	memcpy(header->asl_compiler_id, ASLC, 4);
+	header->asl_compiler_revision = 0;
+
+	fadt->firmware_ctrl = (u32) facs;
+	fadt->dsdt = (u32) dsdt;
+	/* 3=Workstation,4=Enterprise Server, 7=Performance Server */
+	fadt->preferred_pm_profile = 0x03;
+	fadt->sci_int = 9;
+	/* disable system management mode by setting to 0: */
+	fadt->smi_cmd = 0;
+	fadt->acpi_enable = 0xf0;
+	fadt->acpi_disable = 0xf1;
+	fadt->s4bios_req = 0x0;
+	fadt->pstate_cnt = 0xe2;
+
+	/* RTC_En_En, TMR_En_En, GBL_EN_EN */
+	outl(0x1, PM1_CNT_BLK_ADDRESS);           /* set SCI_EN */
+	fadt->pm1a_evt_blk = PM1_EVT_BLK_ADDRESS;
+	fadt->pm1b_evt_blk = 0x0000;
+	fadt->pm1a_cnt_blk = PM1_CNT_BLK_ADDRESS;
+	fadt->pm1b_cnt_blk = 0x0000;
+	fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK_ADDRESS;
+	fadt->pm_tmr_blk = PM1_TMR_BLK_ADDRESS;
+	fadt->gpe0_blk = GPE0_BLK_ADDRESS;
+	fadt->gpe1_blk = 0x0000;	/* we dont have gpe1 block, do we? */
+
+	fadt->pm1_evt_len = 4;
+	fadt->pm1_cnt_len = 2;
+	fadt->pm2_cnt_len = 1;
+	fadt->pm_tmr_len = 4;
+	fadt->gpe0_blk_len = 8;
+	fadt->gpe1_blk_len = 0;
+	fadt->gpe1_base = 0;
+
+	fadt->cst_cnt = 0xe3;
+	fadt->p_lvl2_lat = 101;
+	fadt->p_lvl3_lat = 1001;
+	fadt->flush_size = 0;
+	fadt->flush_stride = 0;
+	fadt->duty_offset = 1;
+	fadt->duty_width = 3;
+	fadt->day_alrm = 0;	/* 0x7d these have to be */
+	fadt->mon_alrm = 0;	/* 0x7e added to cmos.layout */
+	fadt->century = 0;	/* 0x7f to make rtc alrm work */
+	fadt->iapc_boot_arch = 0x3;	/* See table 5-11 */
+	fadt->flags = 0x0001c1a5;/* 0x25; */
+
+	fadt->res2 = 0;
+
+	fadt->reset_reg.space_id = 1;
+	fadt->reset_reg.bit_width = 8;
+	fadt->reset_reg.bit_offset = 0;
+	fadt->reset_reg.resv = 0;
+	fadt->reset_reg.addrl = 0xcf9;
+	fadt->reset_reg.addrh = 0x0;
+
+	fadt->reset_value = 6;
+	fadt->x_firmware_ctl_l = (u32) facs;
+	fadt->x_firmware_ctl_h = 0;
+	fadt->x_dsdt_l = (u32) dsdt;
+	fadt->x_dsdt_h = 0;
+
+	fadt->x_pm1a_evt_blk.space_id = 1;
+	fadt->x_pm1a_evt_blk.bit_width = 32;
+	fadt->x_pm1a_evt_blk.bit_offset = 0;
+	fadt->x_pm1a_evt_blk.resv = 0;
+	fadt->x_pm1a_evt_blk.addrl = PM1_EVT_BLK_ADDRESS;
+	fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_evt_blk.space_id = 1;
+	fadt->x_pm1b_evt_blk.bit_width = 4;
+	fadt->x_pm1b_evt_blk.bit_offset = 0;
+	fadt->x_pm1b_evt_blk.resv = 0;
+	fadt->x_pm1b_evt_blk.addrl = 0x0;
+	fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+
+	fadt->x_pm1a_cnt_blk.space_id = 1;
+	fadt->x_pm1a_cnt_blk.bit_width = 16;
+	fadt->x_pm1a_cnt_blk.bit_offset = 0;
+	fadt->x_pm1a_cnt_blk.resv = 0;
+	fadt->x_pm1a_cnt_blk.addrl = PM1_CNT_BLK_ADDRESS;
+	fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_cnt_blk.space_id = 1;
+	fadt->x_pm1b_cnt_blk.bit_width = 2;
+	fadt->x_pm1b_cnt_blk.bit_offset = 0;
+	fadt->x_pm1b_cnt_blk.resv = 0;
+	fadt->x_pm1b_cnt_blk.addrl = 0x0;
+	fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+
+	fadt->x_pm2_cnt_blk.space_id = 1;
+	fadt->x_pm2_cnt_blk.bit_width = 0;
+	fadt->x_pm2_cnt_blk.bit_offset = 0;
+	fadt->x_pm2_cnt_blk.resv = 0;
+	fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK_ADDRESS;
+	fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+
+	fadt->x_pm_tmr_blk.space_id = 1;
+	fadt->x_pm_tmr_blk.bit_width = 32;
+	fadt->x_pm_tmr_blk.bit_offset = 0;
+	fadt->x_pm_tmr_blk.resv = 0;
+	fadt->x_pm_tmr_blk.addrl = PM1_TMR_BLK_ADDRESS;
+	fadt->x_pm_tmr_blk.addrh = 0x0;
+
+
+	fadt->x_gpe0_blk.space_id = 1;
+	fadt->x_gpe0_blk.bit_width = 32;
+	fadt->x_gpe0_blk.bit_offset = 0;
+	fadt->x_gpe0_blk.resv = 0;
+	fadt->x_gpe0_blk.addrl = GPE0_BLK_ADDRESS;
+	fadt->x_gpe0_blk.addrh = 0x0;
+
+
+	fadt->x_gpe1_blk.space_id = 1;
+	fadt->x_gpe1_blk.bit_width = 0;
+	fadt->x_gpe1_blk.bit_offset = 0;
+	fadt->x_gpe1_blk.resv = 0;
+	fadt->x_gpe1_blk.addrl = 0;
+	fadt->x_gpe1_blk.addrh = 0x0;
+
+	header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+}
+
diff --git a/src/mainboard/tyan/s8226/get_bus_conf.c b/src/mainboard/tyan/s8226/get_bus_conf.c
new file mode 100644
index 0000000..5171c45
--- /dev/null
+++ b/src/mainboard/tyan/s8226/get_bus_conf.c
@@ -0,0 +1,144 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include "agesawrapper.h"
+#if CONFIG_AMD_SB_CIMX
+#include <sb_cimx.h>
+#endif
+
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+ * and acpi_tables busnum is default.
+ */
+u8 bus_isa;
+u8 bus_sp5100[2];
+u8 bus_sr5650[14];
+
+
+u32 bus_type[256];
+
+u32 sbdn_sr5650;
+u32 sbdn_sp5100;
+
+void get_bus_conf(void);
+static u32 get_bus_conf_done = 0;
+
+void get_bus_conf(void)
+{
+	u32 status;
+
+	device_t dev;
+	int i, j;
+
+	if (get_bus_conf_done == 1)
+		return;   /* do it only once */
+
+	get_bus_conf_done = 1;
+
+	/*
+	 * This is the call to AmdInitLate.  It is really in the wrong place, conceptually,
+	 * but functionally within the coreboot model, this is the best place to make the
+	 * call.  The logically correct place to call AmdInitLate is after PCI scan is done,
+	 * after the decision about S3 resume is made, and before the system tables are
+	 * written into RAM.  The routine that is responsible for writing the tables is
+	 * "write_tables", called near the end of "hardwaremain".  There is no platform
+	 * specific entry point between the S3 resume decision point and the call to
+	 * "write_tables", and the next platform specific entry points are the calls to
+	 * the ACPI table write functions.  The first of ose would seem to be the right
+	 * place, but other table write functions, e.g. the PIRQ table write function, are
+	 * called before the ACPI tables are written.  This routine is called at the beginning
+	 * of each of the write functions called prior to the ACPI write functions, so this
+	 * becomes the best place for this call.
+	 */
+	status = agesawrapper_amdinitlate();
+	if(status) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+	}
+
+	sbdn_sp5100 = 0;
+
+	for (i = 0; i < 0; i++) {
+		bus_sp5100[i] = 0;
+	}
+	for (i = 0; i < ARRAY_SIZE(bus_sr5650); i++) {
+		bus_sr5650[i] = 0;
+	}
+
+	for (i = 0; i < 256; i++) {
+		bus_type[i] = 0; /* default ISA bus. */
+	}
+
+	bus_type[0] = 1;  /* pci */
+
+	bus_sr5650[0] = 0;
+	bus_sp5100[0] = bus_sr5650[0];
+
+	/* sp5100 */
+	dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4));
+
+	if (dev) {
+		bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+		bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+		bus_isa++;
+		for (j = bus_sp5100[1]; j < bus_isa; j++)
+			bus_type[j] = 1;
+	}
+
+	/* sr5650 */
+	for (i = 1; i < ARRAY_SIZE(bus_sr5650); i++) {
+		dev = dev_find_slot(bus_sr5650[0], PCI_DEVFN(sbdn_sr5650 + i, 0));
+		if (dev) {
+			bus_sr5650[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			if(255 != bus_sr5650[i]) {
+				bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+				bus_isa++;
+				bus_type[bus_sr5650[i]] = 1; /* PCI bus. */
+			}
+		}
+	}
+
+/*
+	for (i = 0; i < 4; i++) {
+		dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, i));
+		if (dev) {
+			bus_sp5100[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+			bus_isa++;
+		}
+	}
+	for (j = bus_sp5100[2]; j < bus_isa; j++)
+		bus_type[j] = 1;
+*/
+
+
+	/* I/O APICs:   APIC ID Version State   Address */
+	bus_isa = 10;
+
+#if CONFIG_AMD_SB_CIMX
+	sb_After_Pci_Init();
+	sb_Late_Post();
+#endif
+}
diff --git a/src/mainboard/tyan/s8226/irq_tables.c b/src/mainboard/tyan/s8226/irq_tables.c
new file mode 100644
index 0000000..11e5256
--- /dev/null
+++ b/src/mainboard/tyan/s8226/irq_tables.c
@@ -0,0 +1,122 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+		u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+		u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+		u8 slot, u8 rfu)
+{
+	pirq_info->bus = bus;
+	pirq_info->devfn = devfn;
+	pirq_info->irq[0].link = link0;
+	pirq_info->irq[0].bitmap = bitmap0;
+	pirq_info->irq[1].link = link1;
+	pirq_info->irq[1].bitmap = bitmap1;
+	pirq_info->irq[2].link = link2;
+	pirq_info->irq[2].bitmap = bitmap2;
+	pirq_info->irq[3].link = link3;
+	pirq_info->irq[3].bitmap = bitmap3;
+	pirq_info->slot = slot;
+	pirq_info->rfu = rfu;
+}
+extern u8 bus_isa;
+extern u8 bus_sp5100[2];
+extern unsigned long sbdn_sp5100;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+
+	struct irq_routing_table *pirq;
+	struct irq_info *pirq_info;
+	u32 slot_num;
+	u8 *v;
+
+	u8 sum = 0;
+	int i;
+
+
+	get_bus_conf();		/* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+
+	/* Align the table to be 16 byte aligned. */
+	addr += 15;
+	addr &= ~15;
+
+	/* This table must be betweeen 0xf0000 & 0x100000 */
+	printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+	pirq = (void *)(addr);
+	v = (u8 *) (addr);
+
+	pirq->signature = PIRQ_SIGNATURE;
+	pirq->version = PIRQ_VERSION;
+
+	pirq->rtr_bus = bus_sp5100[0];
+	pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4;
+
+	pirq->exclusive_irqs = 0;
+
+	pirq->rtr_vendor = 0x1002;
+	pirq->rtr_device = 0x4384;
+
+	pirq->miniport_data = 0;
+
+	memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+	pirq_info = (void *)(&pirq->checksum + 1);
+	slot_num = 0;
+
+
+	/* pci bridge */
+	write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4,
+			0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+			0);
+	pirq_info++;
+
+
+
+	slot_num++;
+
+
+
+	pirq->size = 32 + 16 * slot_num;
+
+	for (i = 0; i < pirq->size; i++)
+		sum += v[i];
+
+	sum = pirq->checksum - sum;
+
+	if (sum != pirq->checksum) {
+		pirq->checksum = sum;
+	}
+
+	printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+	return (unsigned long)pirq_info;
+
+}
diff --git a/src/mainboard/tyan/s8226/mainboard.c b/src/mainboard/tyan/s8226/mainboard.c
new file mode 100644
index 0000000..9190feb
--- /dev/null
+++ b/src/mainboard/tyan/s8226/mainboard.c
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <boot/tables.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <NbPlatform.h>
+#include "chip.h"
+
+void set_pcie_dereset(void *nbconfig);
+void set_pcie_reset(void *nbconfig);
+
+/**
+ *
+ */
+void set_pcie_reset(void *nbconfig)
+{
+}
+
+/**
+ * Mainboard specific RD890 CIMx callback
+ * Release Resets to PCIe Links
+ * For Both SR56X0 chips, PCIE_RESET_GPIO1 to reset pcie
+ */
+void set_pcie_dereset(void *nbconfig)
+{
+	//u32 nb_dev = MAKE_SBDFO(0, 0x0, 0x0, 0x0, 0x0);
+	u32 i;
+	u32 val;
+	u32 nb_addr;
+
+	val = 0x00000007UL;
+	AMD_NB_CONFIG_BLOCK *pConfig = (AMD_NB_CONFIG_BLOCK*)nbconfig;
+	for (i = 0; i < MAX_NB_COUNT; i ++) {
+		nb_addr = pConfig->Northbridges[i].NbPciAddress.AddressValue | NB_HTIU_INDEX;
+		LibNbPciIndexRMW(nb_addr,
+				NB_HTIU_REGA8,
+				AccessS3SaveWidth32,
+				~val,
+				val,
+				 &(pConfig->Northbridges[i]));
+	}
+}
+
+
+/*************************************************
+ * enable the dedicated function in s8226 board.
+ *************************************************/
+static void s8226_enable(device_t dev)
+{
+	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+}
+
+struct chip_operations mainboard_ops = {
+	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
+		.enable_dev = s8226_enable,
+};
diff --git a/src/mainboard/tyan/s8226/mptable.c b/src/mainboard/tyan/s8226/mptable.c
new file mode 100644
index 0000000..61a7bd4
--- /dev/null
+++ b/src/mainboard/tyan/s8226/mptable.c
@@ -0,0 +1,196 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+extern u8 bus_sr5650[14];
+extern u8 bus_sp5100[2];
+extern u32 bus_type[256];
+extern u32 sbdn_sr5650;
+extern u32 sbdn_sp5100;
+extern u8 bus_isa;
+
+
+static void *smp_write_config_table(void *v)
+{
+	struct mp_config_table *mc;
+	u32 apicid_sp5100;
+	u32 apicid_sr5650;
+	device_t dev;
+	u32 dword;
+
+	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+	mptable_init(mc, LOCAL_APIC_ADDR);
+
+	smp_write_processors(mc);
+	get_bus_conf();
+	mptable_write_buses(mc, NULL, &bus_isa);
+
+	/*
+	 * AGESA v5 Apply apic enumeration rules
+	 * For systems with >= 16 APICs, put the IO-APICs at 0..n and
+	 * put the local-APICs at m..z
+	 * For systems with < 16 APICs, put the Local-APICs at 0..n and
+	 * put the IO-APICs at (n + 1)..z
+	 */
+#if CONFIG_MAX_CPUS >= 16
+	apicid_sp5100 = 0x0;
+#else
+	apicid_sp5100 = CONFIG_MAX_CPUS + 1
+#endif
+	apicid_sr5650 = apicid_sp5100 + 1;
+
+	dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0));
+	if (dev) {
+		/* Set SP5100 IOAPIC ID */
+		dword = pci_read_config32(dev, 0x74) & 0xfffffff0;
+		smp_write_ioapic(mc, apicid_sp5100, 0x20, dword);
+
+#ifdef UNUSED_CODE
+		u8 byte;
+		/* Initialize interrupt mapping */
+		/* aza */
+		byte = pci_read_config8(dev, 0x63);
+		byte &= 0xf8;
+		byte |= 0; /* 0: INTA, ...., 7: INTH */
+		pci_write_config8(dev, 0x63, byte);
+		/* SATA */
+		dword = pci_read_config32(dev, 0xAC);
+		dword &= ~(7 << 26);
+		dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */
+		/* dword |= 1<<22; PIC and APIC co exists */
+		pci_write_config32(dev, 0xAC, dword);
+#endif
+
+		/*
+		 * 00:12.0: PROG SATA : INT F
+		 * 00:13.0: INTA USB_0
+		 * 00:13.1: INTB USB_1
+		 * 00:13.2: INTC USB_2
+		 * 00:13.3: INTD USB_3
+		 * 00:13.4: INTC USB_4
+		 * 00:13.5: INTD USB2
+		 * 00:14.1: INTA IDE
+		 * 00:14.2: Prog HDA : INT E
+		 * 00:14.5: INTB ACI
+		 * 00:14.6: INTB MCI
+		 */
+
+		/* Set RS5650 IOAPIC ID */
+		dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+		if (dev) {
+			pci_write_config32(dev, 0xF8, 0x1);
+			dword = pci_read_config32(dev, 0xFC) & 0xfffffff0;
+			smp_write_ioapic(mc, apicid_sr5650, 0x20, dword);
+		}
+
+	}
+
+	/* I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+	smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+	mptable_add_isa_interrupts(mc, bus_isa, apicid_sp5100, 0);
+
+	/* PCI interrupts are level triggered, and are
+	 * associated with a specific bus/device/function tuple.
+	 */
+#define PCI_INT(bus, dev, int_sign, pin) \
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_sp5100, (pin))
+
+	/* SMBUS */
+	//PCI_INT(0x0, 0x14, 0x0, 0x10); //not generate interrupt, 3Ch hardcoded to 0
+
+	/* HD Audio */
+	PCI_INT(0x0, 0x14, 0x2, 0x10);
+
+	/* USB */
+	/* OHCI0, OHCI1 hard-wired to 01h, corresponding to using INTA# */
+	/* EHCI hard-wired to 02h, corresponding to using INTB# */
+	/* USB1 */
+	PCI_INT(0x0, 0x12, 0x0, 0x10); /* OHCI0 Port 0~2 */
+	PCI_INT(0x0, 0x12, 0x1, 0x10); /* OHCI1 Port 3~5 */
+	PCI_INT(0x0, 0x12, 0x2, 0x11); /* EHCI Port 0~5 */
+
+	/* USB2 */
+	PCI_INT(0x0, 0x13, 0x0, 0x10); /* OHCI0 Port 6~8 */
+	PCI_INT(0x0, 0x13, 0x1, 0x10); /* OHCI1 Port 9~11 */
+	PCI_INT(0x0, 0x13, 0x2, 0x11); /* EHCI Port 6~11 */
+
+	/* USB3 EHCI hard-wired to 03h, corresponding to using INTC# */
+	PCI_INT(0x0, 0x14, 0x5, 0x12); /* OHCI0 Port 12~13 */
+
+	/* SATA */
+	PCI_INT(0x0, 0x11, 0x0, 0x16); //6, INTG
+
+	/* on board NIC & Slot PCIE.  */
+	/* configuration B doesnt need dev 5,6,7 */
+	/*
+	 * PCI_INT(bus_sr5650[0x5], 0x0, 0x0, 0x11);
+	 * PCI_INT(bus_sr5650[0x6], 0x0, 0x0, 0x12);
+	 * PCI_INT(bus_sr5650[0x7], 0x0, 0x0, 0x13);
+	 */
+
+	//smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0, (((13)<<2)|(0)), apicid_sr5650, 28); /* dev d */
+	//smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sr5650[13], (((0)<<2)|(1)), apicid_sr5650, 0); /* card behind dev13 */
+
+	/* PCI slots */
+	/* PCI_SLOT 0. */
+	PCI_INT(bus_sp5100[1], 0x5, 0x0, 0x14);
+	PCI_INT(bus_sp5100[1], 0x5, 0x1, 0x15);
+	PCI_INT(bus_sp5100[1], 0x5, 0x2, 0x16);
+	PCI_INT(bus_sp5100[1], 0x5, 0x3, 0x17);
+
+	/* PCI_SLOT 1. */
+	PCI_INT(bus_sp5100[1], 0x6, 0x0, 0x15);
+	PCI_INT(bus_sp5100[1], 0x6, 0x1, 0x16);
+	PCI_INT(bus_sp5100[1], 0x6, 0x2, 0x17);
+	PCI_INT(bus_sp5100[1], 0x6, 0x3, 0x14);
+
+	/* PCI_SLOT 2. */
+	PCI_INT(bus_sp5100[1], 0x7, 0x0, 0x16);
+	PCI_INT(bus_sp5100[1], 0x7, 0x1, 0x17);
+	PCI_INT(bus_sp5100[1], 0x7, 0x2, 0x14);
+	PCI_INT(bus_sp5100[1], 0x7, 0x3, 0x15);
+
+
+	/*Local Ints:   Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+	IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0);
+	IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1);
+	/* There is no extension information... */
+
+	/* Compute the checksums */
+	return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr, 0);
+	return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/tyan/s8226/platform_cfg.h b/src/mainboard/tyan/s8226/platform_cfg.h
new file mode 100644
index 0000000..bbc4ad7
--- /dev/null
+++ b/src/mainboard/tyan/s8226/platform_cfg.h
@@ -0,0 +1,54 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef _PLATFORM_CFG_H_
+#define _PLATFORM_CFG_H_
+
+
+/* northbridge customize options */
+/**
+ * Max number of northbridges in the system
+ */
+#define MAX_NB_COUNT		1 //TODO: only 1 NB tested
+
+/**
+ *  Enable check for PCIe endpoint to be ready for PCI enumeration.
+ *
+ */
+//#define  EPREADY_WORKAROUND_DISABLED
+
+/**
+ *  Enable IOMMU support. Initialize IOMMU subsystem, generate IVRS ACPI table.
+ *
+ */
+#define  IOMMU_SUPPORT_DISABLE //TODO: enable it
+
+/**
+ *  Disable server PCIe hotplug support.
+ */
+
+//#define HOTPLUG_SUPPORT_DISABLED
+
+/**
+ *  Disable support for device number remapping for PCIe portsserver PCIe hotplug support.
+ */
+
+//#define DEVICE_REMAP_DISABLE
+
+#endif //_PLATFORM_CFG_H_
diff --git a/src/mainboard/tyan/s8226/platform_oem.c b/src/mainboard/tyan/s8226/platform_oem.c
new file mode 100644
index 0000000..883cad1
--- /dev/null
+++ b/src/mainboard/tyan/s8226/platform_oem.c
@@ -0,0 +1,50 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  OemCustomizeInitEarly
+ *
+ *  Description:
+ *    This is the stub function will call the host environment through the binary block
+ *    interface (call-out port) to provide a user hook opportunity
+ *
+ *  Parameters:
+ *    @param[in]      **PeiServices
+ *    @param[in]      *InitEarly
+ *
+ *    @retval         VOID
+ *
+ **/
+/*---------------------------------------------------------------------------------------*/
+VOID OemCustomizeInitEarly(IN OUT AMD_EARLY_PARAMS *InitEarly);
+VOID OemCustomizeInitEarly(IN OUT AMD_EARLY_PARAMS *InitEarly)
+{
+	//InitEarly->PlatformConfig.CoreLevelingMode = CORE_LEVEL_TWO;
+}
+
diff --git a/src/mainboard/tyan/s8226/rd890_cfg.c b/src/mainboard/tyan/s8226/rd890_cfg.c
new file mode 100644
index 0000000..7a947b3
--- /dev/null
+++ b/src/mainboard/tyan/s8226/rd890_cfg.c
@@ -0,0 +1,274 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "NbPlatform.h"
+#include "rd890_cfg.h"
+#include "northbridge/amd/cimx/rd890/chip.h"
+#include "nbInitializer.h"
+#include <string.h>
+#include <arch/ioapic.h>
+
+#ifndef __PRE_RAM__
+#include <device/device.h>
+extern void set_pcie_reset(void *config);
+extern void set_pcie_dereset(void *config);
+
+/**
+ * Platform dependent configuration at ramstage
+ */
+static void nb_platform_config(device_t nb_dev, AMD_NB_CONFIG *NbConfigPtr)
+{
+	u16 i;
+	PCIE_CONFIG *pPcieConfig = NbConfigPtr->pPcieConfig;
+	//AMD_NB_CONFIG_BLOCK *ConfigPtr = GET_BLOCK_CONFIG_PTR(NbConfigPtr);
+	struct northbridge_amd_cimx_rd890_config *rd890_info = NULL;
+	DEFAULT_PLATFORM_CONFIG(platform_config);
+
+	/* update the platform depentent configuration by devicetree */
+	rd890_info  = nb_dev->chip_info;
+	platform_config.PortEnableMap = rd890_info->port_enable;
+	if (rd890_info->gpp1_configuration == 0) {
+		platform_config.Gpp1Config = GFX_CONFIG_AAAA;
+	} else if (rd890_info->gpp1_configuration == 1) {
+		platform_config.Gpp1Config = GFX_CONFIG_AABB;
+	}
+	if (rd890_info->gpp2_configuration == 0) {
+		platform_config.Gpp2Config = GFX_CONFIG_AAAA;
+	} else if (rd890_info->gpp2_configuration == 1) {
+		platform_config.Gpp2Config = GFX_CONFIG_AABB;
+	}
+	platform_config.Gpp3aConfig = rd890_info->gpp3a_configuration;
+
+	if (platform_config.Gpp1Config != 0) {
+		pPcieConfig->CoreConfiguration[0] = platform_config.Gpp1Config;
+	}
+	if (platform_config.Gpp2Config != 0) {
+		pPcieConfig->CoreConfiguration[1] = platform_config.Gpp2Config;
+	}
+	if (platform_config.Gpp3aConfig != 0) {
+		pPcieConfig->CoreConfiguration[2] = platform_config.Gpp3aConfig;
+	}
+
+	pPcieConfig->TempMmioBaseAddress = (UINT16)(platform_config.TemporaryMmio >> 20);
+	for (i = 0; i <= MAX_CORE_ID; i++) {
+		NbConfigPtr->pPcieConfig->CoreSetting[i].SkipConfiguration = OFF;
+		NbConfigPtr->pPcieConfig->CoreSetting[i].PerformanceMode = OFF;
+	}
+	for (i = MIN_PORT_ID; i <= MAX_PORT_ID; i++) {
+		NbConfigPtr->pPcieConfig->PortConfiguration[i].PortLinkMode = PcieLinkModeGen2;
+	}
+
+	for (i = MIN_PORT_ID; i <= MAX_PORT_ID; i++) {
+		if ((platform_config.PortEnableMap & (1 << i)) != 0) {
+			pPcieConfig->PortConfiguration[i].PortPresent = ON;
+			if ((platform_config.PortGen1Map & (1 << i)) != 0) {
+				pPcieConfig->PortConfiguration[i].PortLinkMode = PcieLinkModeGen1;
+			}
+			if ((platform_config.PortHotplugMap & (1 << i)) != 0) {
+				u16 j;
+				pPcieConfig->PortConfiguration[j].PortHotplug = ON; /* Enable Hotplug */
+				/* Set Hotplug descriptor info */
+				for (j = 0; j < 8; j++) {
+					u32 PortDescriptor;
+					PortDescriptor = platform_config.PortHotplugDescriptors[j];
+					if ((PortDescriptor & 0xF) == j) {
+						pPcieConfig->ExtPortConfiguration[j].PortHotplugDevMap  = (PortDescriptor >> 4)  & 3;
+						pPcieConfig->ExtPortConfiguration[j].PortHotplugByteMap = (PortDescriptor >> 6)  & 1;
+						break;
+					}
+				}
+			}
+		}
+	}
+}
+#endif // __PRE_RAM__
+
+/**
+ * @brief Entry point of Northbridge CIMx callout/CallBack
+ *
+ * prototype AGESA_STATUS (*CALLOUT_ENTRY) (UINT32 Param1, UINTN Param2, VOID* ConfigPtr);
+ *
+ * @param[in] u32 func               Northbridge CIMx CallBackId
+ * @param[in] u32 data               Northbridge Input Data.
+ * @param[in] AMD_NB_CONFIG *config  Northbridge configuration structure pointer.
+ *
+ */
+static u32 rd890_callout_entry(u32 func, u32 data, void *config)
+{
+	u32 ret = 0;
+#ifndef __PRE_RAM__
+	device_t nb_dev = (device_t)data;
+#endif
+	AMD_NB_CONFIG *nbConfigPtr = (AMD_NB_CONFIG*)config;
+
+	switch (func) {
+		case PHCB_AmdPortTrainingCompleted:
+			break;
+
+		case PHCB_AmdPortResetDeassert:
+#ifndef __PRE_RAM__
+			set_pcie_dereset(config);
+#endif
+			break;
+
+		case PHCB_AmdPortResetAssert:
+#ifndef __PRE_RAM__
+			set_pcie_reset(config);
+#endif
+			break;
+
+		case PHCB_AmdPortResetSupported:
+			break;
+		case PHCB_AmdGeneratePciReset:
+			break;
+		case PHCB_AmdGetExclusionTable:
+			break;
+		case PHCB_AmdAllocateBuffer:
+			break;
+		case PHCB_AmdUpdateApicInterruptMapping:
+			break;
+		case PHCB_AmdFreeBuffer:
+			break;
+		case PHCB_AmdLocateBuffer:
+			break;
+		case PHCB_AmdReportEvent:
+			break;
+		case PHCB_AmdPcieAsmpInfo:
+			break;
+
+		case CB_AmdSetNbPorConfig:
+			break;
+		case CB_AmdSetHtConfig:
+			/*TODO: different HT path and deempasis for each NB */
+			nbConfigPtr->pHtConfig->NbTransmitterDeemphasis = DEFAULT_HT_DEEMPASIES;
+
+			break;
+		case CB_AmdSetPcieEarlyConfig:
+#ifndef __PRE_RAM__
+			nb_platform_config(nb_dev, nbConfigPtr);
+#endif
+			break;
+
+		case CB_AmdSetEarlyPostConfig:
+			break;
+
+		case CB_AmdSetMidPostConfig:
+			nbConfigPtr->pNbConfig->IoApicBaseAddress = IO_APIC_ADDR;
+#ifndef IOMMU_SUPPORT_DISABLE //TODO enable iommu
+			/* SBIOS must alloc 16K memory for IOMMU MMIO */
+			UINT32  MmcfgBarAddress; //using default IOmmuBaseAddress
+			LibNbPciRead(nbConfigPtr->NbPciAddress.AddressValue | 0x1C,
+					AccessWidth32,
+					&MmcfgBarAddress,
+					nbConfigPtr);
+			MmcfgBarAddress &= ~0xf;
+			if (MmcfgBarAddress != 0) {
+				nbConfigPtr->IommuBaseAddress = MmcfgBarAddress;
+			}
+			nbConfigPtr->IommuBaseAddress = 0; //disable iommu
+#endif
+			break;
+
+		case CB_AmdSetLatePostConfig:
+			break;
+
+		case CB_AmdSetRecoveryConfig:
+			break;
+	}
+
+	return ret;
+}
+
+
+/**
+ * @brief North Bridge CIMx configuration
+ *
+ * should be called before exeucte CIMx function.
+ * this function will be called in romstage and ramstage.
+ */
+void rd890_cimx_config(AMD_NB_CONFIG_BLOCK *pConfig, NB_CONFIG *nbConfig, HT_CONFIG *htConfig, PCIE_CONFIG *pcieConfig)
+{
+	u16 i = 0;
+	PCI_ADDR PciAddress;
+	u32 val, sbNode, sbLink;
+
+	if (!pConfig) {
+		return;
+	}
+
+	memset(pConfig, 0, sizeof(AMD_NB_CONFIG_BLOCK));
+	for (i = 0; i < MAX_NB_COUNT; i++) {
+		pConfig->Northbridges[i].pNbConfig	= &nbConfig[i];
+		pConfig->Northbridges[i].pHtConfig	= &htConfig[i];
+		pConfig->Northbridges[i].pPcieConfig	= &pcieConfig[i];
+		pConfig->Northbridges[i].ConfigPtr	= &pConfig;
+	}
+
+	/* Initialize all NB structures */
+	AmdInitializer(pConfig);
+
+	pConfig->NumberOfNorthbridges = MAX_NB_COUNT - 1; /* Support limited to primary NB only located at 0:0:0 */
+	//pConfig->StandardHeader.ImageBasePtr = CIMX_B2_IMAGE_BASE_ADDRESS;
+	pConfig->StandardHeader.PcieBasePtr = (VOID *)PCIEX_BASE_ADDRESS;
+	pConfig->StandardHeader.CalloutPtr = &rd890_callout_entry;
+
+	/*
+	 * PCI Address to Access NB. Depends on HT topology and configuration for multi NB platform.
+	 * Always 0:0:0 on single NB platform.
+	 */
+	pConfig->Northbridges[0].NbPciAddress.AddressValue = MAKE_SBDFO(0, 0x0, 0x0, 0x0, 0x0);
+
+	/* Set HT path to NB by SbNode and SbLink */
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x60);
+	LibNbPciRead(PciAddress.AddressValue, AccessWidth32, &val, &(pConfig->Northbridges[0]));
+	sbNode = (val >> 8) & 0x07;
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x64);
+	LibNbPciRead(PciAddress.AddressValue, AccessWidth32, &val, &(pConfig->Northbridges[0]));
+	sbLink = (val >> 8) & 0x07; //assum ganged
+	pConfig->Northbridges[0].NbHtPath.NodeID = sbNode;
+	pConfig->Northbridges[0].NbHtPath.LinkID = sbLink;
+	//TODO: other NBs
+
+#ifndef __PRE_RAM__
+	/* If temporrary MMIO enable set up CPU MMIO */
+	for (i = 0; i <= pConfig->NumberOfNorthbridges; i++) {
+		UINT32  MmioBase;
+		UINT32  LinkId;
+		UINT32  SubLinkId;
+		MmioBase = pConfig->Northbridges[i].pPcieConfig->TempMmioBaseAddress;
+		if (MmioBase != 0) {
+			LinkId = pConfig->Northbridges[i].NbHtPath.LinkID & 0xf;
+			SubLinkId = ((pConfig->Northbridges[i].NbHtPath.LinkID & 0xF0) == 0x20) ? 1 : 0;
+			/* Set Limit */
+			LibNbPciRMW(MAKE_SBDFO (0, 0, 0x18, 0x1, (i * 4) + 0x84),
+					AccessWidth32,
+					0x0,
+					((MmioBase << 12) + 0xF00) | (LinkId << 4) | (SubLinkId << 6),
+					&(pConfig->Northbridges[i]));
+			/* Set Base */
+			LibNbPciRMW(MAKE_SBDFO (0, 0, 0x18, 0x1, (i * 4) + 0x80),
+					AccessWidth32,
+					0x0,
+					(MmioBase << 12) | 0x3,
+					&(pConfig->Northbridges[i]));
+		}
+	}
+#endif
+}
+
diff --git a/src/mainboard/tyan/s8226/rd890_cfg.h b/src/mainboard/tyan/s8226/rd890_cfg.h
new file mode 100644
index 0000000..8f45019
--- /dev/null
+++ b/src/mainboard/tyan/s8226/rd890_cfg.h
@@ -0,0 +1,174 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef  _RD890_CFG_H_
+#define _RD890_CFG_H_
+
+#include "NbPlatform.h"
+
+/* platform dependent configuration default value */
+
+/**
+ * Path from CPU to NB
+ * [0..7]   - Node  (0..8)
+ * [8..11]  - Link  (0..3)
+ * [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0.
+ */
+#ifndef DEFAULT_HT_PATH
+#if CONFIG_CPU_AMD_AGESA_FAMILY10 == 1
+#define DEFAULT_HT_PATH		{0x0, 0x3}
+#endif
+#if CONFIG_CPU_AMD_AGESA_FAMILY15 == 1
+#define DEFAULT_HT_PATH		{0x0, 0x1}
+#endif
+#endif
+
+/**
+ * Bitmap of enabled ports on NB #0/1/2/3
+ * Bit[0] - Reserved
+ * Bit[1] - Reserved
+ * Bit[2] - Enable PCIe port 2
+ * Bit[3] - Enable PCIe port 3
+ * Bit[4] - Enable PCIe port 4
+ * Bit[5] - Enable PCIe port 5
+ * Bit[6] - Enable PCIe port 2
+ * Bit[7] - Enable PCIe port 7
+ * Bit[8] - Reserved
+ * Bit[9] - Enable PCIe port 9
+ * Bit[10]- Enable PCIe port 10
+ * Bit[11]- Enable PCIe port 11
+ * Bit[12]- Enable PCIe port 12
+ * Bit[13]- Enable PCIe port 13
+ * Example:
+ *  port_enable = 0x14
+ *  Port 2 and 4 enabled for training/initialization
+ */
+#ifndef DEFAULT_PORT_ENABLE_MAP
+#define DEFAULT_PORT_ENABLE_MAP		0x0014
+#endif
+
+/**
+ * Bitmap of ports that have slot or onboard device connected.
+ * Example force PCIe Gen1 supporton port 2 and 4  (DEFAULT_PORT_ENABLE_MAP = BIT2 | BIT4)
+ * #define DEFAULT_PORT_FORCE_GEN1        0x604
+ */
+#ifndef DEFAULT_PORT_FORCE_GEN1
+#define DEFAULT_PORT_FORCE_GEN1		0x0
+#endif
+
+/**
+ * Bitmap of ports that have server hotplug support
+ */
+#ifndef DEFAULT_HOTPLUG_SUPPORT
+#define DEFAULT_HOTPLUG_SUPPORT		0x0
+#endif
+
+#ifndef DEFAULT_HOTPLUG_DESCRIPTOR
+#define DEFAULT_HOTPLUG_DESCRIPTOR		{0, 0, 0, 0, 0, 0, 0, 0}
+#endif
+
+#ifndef DEFAULT_TEMPMMIO_BASE_ADDRESS
+#define DEFAULT_TEMPMMIO_BASE_ADDRESS		0xD0000000
+#endif
+
+/**
+ * Default GPP1 core configuraton on NB #0/1/2/3.
+ *  2  x8 slot, GFX_CONFIG_AABB
+ *  1 x16 slot, GFX_CONFIG_AAAA
+ */
+#ifndef DEFAULT_GPP1_CONFIG
+#define DEFAULT_GPP1_CONFIG		GFX_CONFIG_AABB
+#endif
+
+/**
+ * Default GPP2 core configuraton on NB #0/1/2/3.
+ *  2  x8 slot, GFX_CONFIG_AABB
+ *  1 x16 slot, GFX_CONFIG_AAAA
+ */
+#ifndef DEFAULT_GPP2_CONFIG
+#define DEFAULT_GPP2_CONFIG		GFX_CONFIG_AABB
+#endif
+
+/**
+ * Default GPP3a core configuraton on NB #0/1/2/3.
+ * 4:2:0:0:0:0   - GPP_CONFIG_GPP420000, 0x1
+ * 4:1:1:0:0:0   - GPP_CONFIG_GPP411000, 0x2
+ * 2:2:2:0:0:0   - GPP_CONFIG_GPP222000, 0x3
+ * 2:2:1:1:0:0   - GPP_CONFIG_GPP221100, 0x4
+ * 2:1:1:1:1:0   - GPP_CONFIG_GPP211110, 0x5
+ * 1:1:1:1:1:1   - GPP_CONFIG_GPP111111, 0x6
+ */
+#ifndef DEFAULT_GPP3A_CONFIG
+#define DEFAULT_GPP3A_CONFIG		GPP_CONFIG_GPP111111
+#endif
+
+
+/**
+ * Default HT Transmitter de-emphasis setting
+ */
+#ifndef DEFAULT_HT_DEEMPASIES
+#define DEFAULT_HT_DEEMPASIES		0x3
+#endif
+
+/**
+ * Default APIC nterrupt base for IOAPIC
+ */
+#ifndef DEFAULT_APIC_INTERRUPT_BASE
+#define DEFAULT_APIC_INTERRUPT_BASE	24
+#endif
+
+
+#define DEFAULT_PLATFORM_CONFIG(name) \
+	NB_PLATFORM_CONFIG name = { \
+		DEFAULT_PORT_ENABLE_MAP, \
+		DEFAULT_PORT_FORCE_GEN1, \
+		DEFAULT_HOTPLUG_SUPPORT, \
+		DEFAULT_HOTPLUG_DESCRIPTOR, \
+		DEFAULT_TEMPMMIO_BASE_ADDRESS, \
+		DEFAULT_GPP1_CONFIG, \
+		DEFAULT_GPP2_CONFIG, \
+		DEFAULT_GPP3A_CONFIG, \
+		DEFAULT_HT_DEEMPASIES, \
+		/*DEFAULT_HT_PATH,*/ \
+		DEFAULT_APIC_INTERRUPT_BASE, \
+	}
+
+/**
+ * Platform configuration
+ */
+typedef struct {
+	UINT16  PortEnableMap;            ///< Bitmap of enabled ports
+	UINT16  PortGen1Map;              ///< Bitmap of ports to disable Gen2
+	UINT16  PortHotplugMap;           ///< Bitmap of ports support hotplug
+	UINT8   PortHotplugDescriptors[8];///< Ports Hotplug descriptors
+	UINT32  TemporaryMmio;            ///< Temporary MMIO
+	UINT32  Gpp1Config;               ///< Default PCIe GFX core configuration
+	UINT32  Gpp2Config;               ///< Default PCIe GPP2 core configuration
+	UINT32  Gpp3aConfig;              ///< Default PCIe GPP3a core configuration
+	UINT8   NbTransmitterDeemphasis;  ///< HT transmitter de-emphasis level
+	//	HT_PATH NbHtPath;                 ///< HT path to NB
+	UINT8   GlobalApicInterruptBase;  ///< Global APIC interrupt base that is used in MADT table for IO APIC.
+} NB_PLATFORM_CONFIG;
+
+/**
+ * Bridge CIMx configuration
+ */
+void rd890_cimx_config(AMD_NB_CONFIG_BLOCK *pConfig, NB_CONFIG *nbConfig, HT_CONFIG *htConfig, PCIE_CONFIG *pcieConfig);
+
+#endif //_RD890_CFG_H_
diff --git a/src/mainboard/tyan/s8226/reset.c b/src/mainboard/tyan/s8226/reset.c
new file mode 100644
index 0000000..68a39f2
--- /dev/null
+++ b/src/mainboard/tyan/s8226/reset.c
@@ -0,0 +1,66 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <reset.h>
+#include <arch/io.h>		/*inb, outb*/
+#include <arch/romcc_io.h>	/*pci_read_config32, device_t, PCI_DEV*/
+
+#define HT_INIT_CONTROL		0x6C
+#define HTIC_BIOSR_Detect	(1<<5)
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 32
+#define NODE_PCI(x, fn)	((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
+#else
+#define NODE_PCI(x, fn)	PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
+#endif
+
+static inline void set_bios_reset(void)
+{
+	u32 nodes;
+	u32 htic;
+	device_t dev;
+	int i;
+
+	nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
+	for(i = 0; i < nodes; i++) {
+		dev = NODE_PCI(i, 0);
+		htic = pci_read_config32(dev, HT_INIT_CONTROL);
+		htic &= ~HTIC_BIOSR_Detect;
+		pci_write_config32(dev, HT_INIT_CONTROL, htic);
+	}
+}
+
+void hard_reset(void)
+{
+	set_bios_reset();
+	/* Try rebooting through port 0xcf9 */
+	/* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
+	outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
+	outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
+}
+
+//SbReset();
+void soft_reset(void)
+{
+	set_bios_reset();
+	/* link reset */
+	outb(0x06, 0x0cf9);
+}
+
diff --git a/src/mainboard/tyan/s8226/romstage.c b/src/mainboard/tyan/s8226/romstage.c
new file mode 100644
index 0000000..9ebafc7
--- /dev/null
+++ b/src/mainboard/tyan/s8226/romstage.c
@@ -0,0 +1,148 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <lib.h>
+#include <reset.h>
+#include <stdint.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <arch/cpu.h>
+#include <console/console.h>
+#include <arch/stages.h>
+#include "cpu/x86/bist.h"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "agesawrapper.h"
+#include "northbridge/amd/agesa/family10/reset_test.h"
+#include <nb_cimx.h>
+#include <sb_cimx.h>
+#include "superio/nuvoton/wpcm450/wpcm450.h"
+#include "superio/winbond/w83627dhg/w83627dhg.h"
+#include "src/drivers/pc80/i8254.c"
+#include "src/drivers/pc80/i8259.c"
+#include <cpu/x86/cache.h>
+
+extern void disable_cache_as_ram(void); /* cache_as_ram.inc */
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
+#define DUMMY_DEV PNP_DEV(0x2e, 0)
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	u32 val;
+
+	post_code(0x30);
+	agesawrapper_amdinitmmio();
+	post_code(0x31);
+
+	/* Halt if there was a built in self test failure */
+	post_code(0x33);
+	report_bist_failure(bist);
+
+	sb7xx_51xx_enable_wideio(0, 0x1600); /* though UARTs are on the NUVOTON BMC */
+ 	w83627dhg_set_clksel_48(DUMMY_DEV);
+ 	w83627dhg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+	sb7xx_51xx_disable_wideio(0);
+	post_code(0x34);
+
+	uart_init();
+	post_code(0x35);
+	console_init();
+
+	val = cpuid_eax(1);
+	printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+	post_code(0x37);
+	val = agesawrapper_amdinitreset();
+	if (val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val);
+	} else {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitreset passed\n");
+	}
+
+	if (!cpu_init_detectedx && boot_cpu()) {
+		post_code(0x38);
+		/*
+		 * SR5650/5670/5690 RD890 chipset, read pci config space hang at POR,
+		 * Disable all Pcie Bridges to work around It.
+		 */
+		sr56x0_rd890_disable_pcie_bridge();
+		post_code(0x39);
+		nb_Poweron_Init();
+		post_code(0x3A);
+		sb_Poweron_Init();
+	}
+	post_code(0x3B);
+	val = agesawrapper_amdinitearly();
+	if(val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val);
+	} else {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitearly passed\n");
+	}
+
+	post_code(0x3C);
+	/* W83627DHG pin89,90 function select is RSTOUT3#, RSTOUT2# by default.
+	 * In order to access W83795G/ADG HWM using I2C protocol,
+	 * we select function to SDA, SCL function (or GP33, GP32 function).
+	 */
+	w83627dhg_enable_i2c(PNP_DEV(0x2E, W83627DHG_SPI));
+
+	nb_Ht_Init();
+	post_code(0x3D);
+	/* Reset for HT, FIDVID, PLL and ucode patch(errata) changes to take affect. */
+	if (!warm_reset_detect(0)) {
+		print_info("...WARM RESET...\n\n\n");
+		distinguish_cpu_resets(0);
+		soft_reset();
+		die("After soft_reset_x - shouldn't see this message!!!\n");
+	}
+
+	post_code(0x40);
+	val = agesawrapper_amdinitpost();
+	if (val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val);
+	} else {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitpost passed\n");
+	}
+
+	post_code(0x41);
+	val = agesawrapper_amdinitenv();
+	if(val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val);
+	}
+	printk(BIOS_DEBUG, "agesawrapper_amdinitenv passed\n");
+
+	post_code(0x42);
+
+	post_code(0x50);
+	print_debug("Disabling cache as ram ");
+	disable_cache_as_ram();
+	enable_cache();
+	print_debug("done\n");
+
+	post_code(0x51);
+	setup_i8259 ();
+	setup_i8254 ();
+	copy_and_run(0);
+
+	/* We will not return,  Should never see this message and post code. */
+	print_debug("should not be here -\n");
+	post_code(0x54);
+}
+
diff --git a/src/mainboard/tyan/s8226/sb700_cfg.c b/src/mainboard/tyan/s8226/sb700_cfg.c
new file mode 100644
index 0000000..4cbb8ca
--- /dev/null
+++ b/src/mainboard/tyan/s8226/sb700_cfg.c
@@ -0,0 +1,142 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <string.h>
+#include <console/console.h>    /* printk */
+#include "Platform.h"
+#include "sb700_cfg.h"
+
+
+/**
+ * @brief South Bridge CIMx configuration
+ *
+ * should be called before exeucte CIMx function.
+ * this function will be called in romstage and ramstage.
+ */
+void sb700_cimx_config(AMDSBCFG *sb_config)
+{
+	if (!sb_config) {
+		printk(BIOS_DEBUG, "SB700 - Cfg.c - sb700_cimx_config - No sb_config.\n");
+		return;
+	}
+	printk(BIOS_DEBUG, "SB700 - Cfg.c - sb700_cimx_config - Start.\n");
+	memset(sb_config, 0, sizeof(AMDSBCFG));
+
+	/* SB_POWERON_INIT */
+	sb_config->StdHeader.Func = SB_POWERON_INIT;
+
+	/* header */
+	sb_config->StdHeader.pPcieBase = PCIEX_BASE_ADDRESS;
+
+	/* static Build Parameters */
+	sb_config->BuildParameters.BiosSize = BIOS_SIZE;
+	sb_config->BuildParameters.LegacyFree = LEGACY_FREE;
+	sb_config->BuildParameters.EcKbd = 0;
+	sb_config->BuildParameters.EcChannel0 = 0;
+	sb_config->BuildParameters.Smbus0BaseAddress = SMBUS0_BASE_ADDRESS;
+	sb_config->BuildParameters.Smbus1BaseAddress = SMBUS1_BASE_ADDRESS;
+	sb_config->BuildParameters.SioPmeBaseAddress = SIO_PME_BASE_ADDRESS;
+	sb_config->BuildParameters.WatchDogTimerBase = WATCHDOG_TIMER_BASE_ADDRESS;
+	sb_config->BuildParameters.SpiRomBaseAddress = SPI_BASE_ADDRESS;
+
+	sb_config->BuildParameters.AcpiPm1EvtBlkAddr = PM1_EVT_BLK_ADDRESS;
+	sb_config->BuildParameters.AcpiPm1CntBlkAddr = PM1_CNT_BLK_ADDRESS;
+	sb_config->BuildParameters.AcpiPmTmrBlkAddr = PM1_TMR_BLK_ADDRESS;
+	sb_config->BuildParameters.CpuControlBlkAddr = CPU_CNT_BLK_ADDRESS;
+	sb_config->BuildParameters.AcpiGpe0BlkAddr = GPE0_BLK_ADDRESS;
+	sb_config->BuildParameters.SmiCmdPortAddr = SMI_CMD_PORT;
+	sb_config->BuildParameters.AcpiPmaCntBlkAddr = ACPI_PMA_CNT_BLK_ADDRESS;
+
+	sb_config->BuildParameters.SataIDESsid = SATA_IDE_MODE_SSID;
+	sb_config->BuildParameters.SataRAIDSsid = SATA_RAID_MODE_SSID;
+	sb_config->BuildParameters.SataRAID5Ssid = SATA_RAID5_MODE_SSID;
+	sb_config->BuildParameters.SataAHCISsid = SATA_AHCI_SSID;
+	sb_config->BuildParameters.Ohci0Ssid = OHCI0_SSID;
+	sb_config->BuildParameters.Ohci1Ssid = OHCI1_SSID;
+	sb_config->BuildParameters.Ohci2Ssid = OHCI2_SSID;
+	sb_config->BuildParameters.Ohci3Ssid = OHCI3_SSID;
+	sb_config->BuildParameters.Ohci4Ssid = OHCI4_SSID;
+	sb_config->BuildParameters.Ehci0Ssid = EHCI0_SSID;
+	sb_config->BuildParameters.Ehci1Ssid = EHCI1_SSID;
+	sb_config->BuildParameters.SmbusSsid = SMBUS_SSID;
+	sb_config->BuildParameters.IdeSsid = IDE_SSID;
+	sb_config->BuildParameters.AzaliaSsid = AZALIA_SSID;
+	sb_config->BuildParameters.LpcSsid = LPC_SSID;
+
+	sb_config->BuildParameters.HpetBase = HPET_BASE_ADDRESS;
+
+	/* General */
+	sb_config->Spi33Mhz = 1;
+	sb_config->SpreadSpectrum = 0;
+	sb_config->PciClk5 = 0;
+	sb_config->PciClks = 0x1F;
+	sb_config->ResetCpuOnSyncFlood = 1; // Do not reset CPU on sync flood
+	sb_config->TimerClockSource = 2;  // Auto
+	sb_config->S3Resume = 0;
+	sb_config->RebootRequired = 0;
+
+	/* HPET */
+	sb_config->HpetTimer = HPET_TIMER;
+
+	/* USB */
+	sb_config->UsbIntClock = 0;     // Use external clock
+	sb_config->Usb1Ohci0 = 1; //0:disable  1:enable Bus 0 Dev 18 Func0
+	sb_config->Usb1Ohci1 = 1; //0:disable  1:enable Bus 0 Dev 18 Func1
+	sb_config->Usb1Ehci  = 1; //0:disable  1:enable Bus 0 Dev 18 Func2
+	sb_config->Usb2Ohci0 = 1; //0:disable  1:enable Bus 0 Dev 19 Func0
+	sb_config->Usb2Ohci1 = 1; //0:disable  1:enable Bus 0 Dev 19 Func1
+	sb_config->Usb2Ehci  = 1; //0:disable  1:enable Bus 0 Dev 19 Func2
+	sb_config->Usb3Ohci  = 1; //0:disable  1:enable Bus 0 Dev 20 Func5
+	sb_config->UsbOhciLegacyEmulation = 1; //0:Enable  1:Disable
+
+	sb_config->AcpiS1Supported = 1;
+
+	/* SATA */
+	sb_config->SataController = 1;
+	sb_config->SataClass = CONFIG_SATA_CONTROLLER_MODE; //0 native, 1 raid, 2 ahci
+	sb_config->SataSmbus = 0;
+	sb_config->SataAggrLinkPmCap = 1;
+	sb_config->SataPortMultCap = 1;
+	sb_config->SataClkAutoOff = 1;
+	sb_config->SataIdeCombMdPriSecOpt = 0; //0 -IDE as primary, 1 -IDE as secondary.
+	//TODO: set to secondary not take effect.
+	sb_config->SataIdeCombinedMode = 0; //1 IDE controlor exposed and combined mode enabled, 0 disabled
+	sb_config->SataEspPort = 0;
+	sb_config->SataClkAutoOffAhciMode = 1;
+	sb_config->SataHpcpButNonESP = 0;
+	sb_config->SataHideUnusedPort = 0;
+
+	/* Azalia HDA */
+	sb_config->AzaliaController = AZALIA_CONTROLLER;
+	sb_config->AzaliaPinCfg = AZALIA_PIN_CONFIG;
+	sb_config->AzaliaSdin0 = AZALIA_SDIN_PIN;
+	sb_config->pAzaliaOemCodecTablePtr = NULL;
+
+#ifndef __PRE_RAM__
+	/* ramstage cimx config here */
+	if (!sb_config->StdHeader.pCallBack) {
+		sb_config->StdHeader.pCallBack = sb700_callout_entry;
+	}
+
+	//sb_config->
+#endif //!__PRE_RAM__
+	printk(BIOS_DEBUG, "SB700 - Cfg.c - sb700_cimx_config - End.\n");
+}
+
diff --git a/src/mainboard/tyan/s8226/sb700_cfg.h b/src/mainboard/tyan/s8226/sb700_cfg.h
new file mode 100644
index 0000000..45d7a92
--- /dev/null
+++ b/src/mainboard/tyan/s8226/sb700_cfg.h
@@ -0,0 +1,237 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#ifndef _SB700_CFG_H_
+#define _SB700_CFG_H_
+
+#include <stdint.h>
+
+
+/**
+ * @def BIOS_SIZE_1M
+ * @def BIOS_SIZE_2M
+ * @def BIOS_SIZE_4M
+ * @def BIOS_SIZE_8M
+ */
+#define BIOS_SIZE_1M                    0
+#define BIOS_SIZE_2M                    1
+#define BIOS_SIZE_4M                    3
+#define BIOS_SIZE_8M                    7
+
+/* In SB700, default ROM size is 1M Bytes, if your platform ROM
+ * bigger than 1M you have to set the ROM size outside CIMx module and
+ * before AGESA module get call.
+ */
+#ifndef BIOS_SIZE
+#if CONFIG_COREBOOT_ROMSIZE_KB_1024
+#define BIOS_SIZE BIOS_SIZE_1M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_2048
+#define BIOS_SIZE BIOS_SIZE_2M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_4096
+#define BIOS_SIZE BIOS_SIZE_4M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_8192
+#define BIOS_SIZE BIOS_SIZE_8M
+#endif
+#endif
+
+/**
+ * @def SPREAD_SPECTRUM
+ * @brief
+ *  0 - Disable Spread Spectrum function
+ *  1 - Enable  Spread Spectrum function
+ */
+#define SPREAD_SPECTRUM                 0
+
+/**
+ * @def SB_HPET_TIMER
+ * @breif
+ *  0 - Disable hpet
+ *  1 - Enable  hpet
+ */
+#define HPET_TIMER                      1
+
+/**
+ * @def USB_CONFIG
+ * @brief bit[0-6] used to control USB
+ *   0 - Disable
+ *   1 - Enable
+ *  Usb Ohci1 Contoller (Bus 0 Dev 18 Func0) is define at BIT0
+ *  Usb Ehci1 Contoller (Bus 0 Dev 18 Func2) is define at BIT1
+ *  Usb Ohci2 Contoller (Bus 0 Dev 19 Func0) is define at BIT2
+ *  Usb Ehci2 Contoller (Bus 0 Dev 19 Func2) is define at BIT3
+ *  Usb Ohci3 Contoller (Bus 0 Dev 22 Func0) is define at BIT4
+ *  Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5
+ *  Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6
+ */
+#define USB_CINFIG              0x7F
+
+/**
+ * @def PCI_CLOCK_CTRL
+ * @breif bit[0-4] used for PCI Slots Clock Control,
+ *   0 - disable
+ *   1 - enable
+ *  PCI SLOT 0 define at BIT0
+ *  PCI SLOT 1 define at BIT1
+ *  PCI SLOT 2 define at BIT2
+ *  PCI SLOT 3 define at BIT3
+ *  PCI SLOT 4 define at BIT4
+ */
+#define PCI_CLOCK_CTRL                  0x1F
+
+/**
+ * @def SATA_CONTROLLER
+ * @breif INCHIP Sata Controller
+ */
+#ifndef SATA_CONTROLLER
+#define SATA_CONTROLLER               1
+#endif
+
+/**
+ * @def SATA_MODE
+ * @breif INCHIP Sata Controller Mode
+ *   NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#ifndef SATA_MODE
+#define SATA_MODE                     NATIVE_IDE_MODE
+#endif
+
+/**
+ * @breif INCHIP Sata IDE Controller Mode
+ */
+#define IDE_LEGACY_MODE                 0
+#define IDE_NATIVE_MODE                 1
+
+/**
+ * @def SATA_IDE_MODE
+ * @breif INCHIP Sata IDE Controller Mode
+ *   NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#ifndef SATA_IDE_MODE
+#define SATA_IDE_MODE                 IDE_LEGACY_MODE
+#endif
+
+/**
+ * @def EXTERNAL_CLOCK
+ * @brief 00/10: Reference clock from crystal oscillator via
+ *  PAD_XTALI and PAD_XTALO
+ *
+ * @def INTERNAL_CLOCK
+ * @brief 01/11: Reference clock from internal clock through
+ *  CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL
+ */
+#define EXTERNAL_CLOCK          0x00
+#define INTERNAL_CLOCK          0x01
+
+#define SATA_CLOCK_SOURCE       EXTERNAL_CLOCK
+
+/**
+ * @def SATA_PORT_MULT_CAP_RESERVED
+ * @brief 1 ON, 0 0FF
+ */
+#define SATA_PORT_MULT_CAP_RESERVED     1
+
+
+/**
+ * @def   AZALIA_AUTO
+ * @brief Detect Azalia controller automatically.
+ *
+ * @def   AZALIA_DISABLE
+ * @brief Disable Azalia controller.
+
+ * @def   AZALIA_ENABLE
+ * @brief Enable Azalia controller.
+ */
+#define AZALIA_AUTO                     0
+#define AZALIA_DISABLE                  1
+#define AZALIA_ENABLE                   2
+
+/**
+ * @breif INCHIP HDA controller
+ */
+#ifndef AZALIA_CONTROLLER
+#define AZALIA_CONTROLLER             AZALIA_AUTO
+#endif
+
+/**
+ * @def AZALIA_PIN_CONFIG
+ * @brief
+ *  0 - disable
+ *  1 - enable
+ */
+#ifndef AZALIA_PIN_CONFIG
+#define AZALIA_PIN_CONFIG             1
+#endif
+
+/**
+ * @def AZALIA_SDIN_PIN
+ * @brief
+ *  SDIN0 is define at BIT0 & BIT1
+ *   00 - GPIO PIN
+ *   01 - Reserved
+ *   10 - As a Azalia SDIN pin
+ *  SDIN1 is define at BIT2 & BIT3
+ *  SDIN2 is define at BIT4 & BIT5
+ *  SDIN3 is define at BIT6 & BIT7
+ */
+#ifndef AZALIA_SDIN_PIN
+//#define AZALIA_SDIN_PIN             0xAA
+#define AZALIA_SDIN_PIN               0x2A
+#endif
+
+/**
+ * @def GPP_CONTROLLER
+ */
+#ifndef GPP_CONTROLLER
+#define GPP_CONTROLLER                1
+#endif
+
+/**
+ * @def GPP_CFGMODE
+ * @brief GPP Link Configuration
+ * four possible configuration:
+ *  GPP_CFGMODE_X4000
+ *  GPP_CFGMODE_X2200
+ *  GPP_CFGMODE_X2110
+ *  GPP_CFGMODE_X1111
+ */
+#ifndef GPP_CFGMODE
+#define GPP_CFGMODE                   GPP_CFGMODE_X1111
+#endif
+
+
+/**
+ * @brief South Bridge CIMx configuration
+ *
+ */
+void sb700_cimx_config(AMDSBCFG *sb_cfg);
+
+/**
+ * @brief Entry point of Southbridge CIMx callout
+ *
+ * prototype UINT32 (*SBCIM_HOOK_ENTRY)(UINT32 Param1, UINT32 Param2, void* pConfig)
+ *
+ * @param[in] func    Southbridge CIMx Function ID.
+ * @param[in] data    Southbridge Input Data.
+ * @param[in] sb_cfg  Southbridge configuration structure pointer.
+ *
+ */
+u32 sb700_callout_entry(u32 func, u32 data, void* sb_cfg);
+
+#endif //_SB700_CFG_H_



From gerrit at coreboot.org  Thu Sep  6 10:42:16 2012
From: gerrit at coreboot.org (Stefan Tauner (stefan.tauner@gmx.at))
Date: Thu, 6 Sep 2012 10:42:16 +0200
Subject: [coreboot] New patch to review for coreboot: f47db2b superiotool:
	Add support for Fintek F81865F/F-I register dump.
References: <Id86267f5add539b99229f20bbe339bfb5eb20f8b+0@gerrit.coreboot.org>
Message-ID: <Id86267f5add539b99229f20bbe339bfb5eb20f8b+1@gerrit.coreboot.org>

Stefan Tauner (stefan.tauner at gmx.at) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1496

-gerrit

commit f47db2b91f77c2a8fdca0036a83539012c86c254
Author: Stefan Tauner <stefan.tauner at gmx.at>
Date:   Thu Sep 6 10:38:49 2012 +0200

    superiotool: Add support for Fintek F81865F/F-I register dump.
    
    Datasheet: http://www.fintek.com.tw/files/productfiles/F81865_V028P.pdf
    
    The code was done by Juha Tuomala <Juha.Tuomala at iki.fi> but he refused
    to sign it off, or commit it for review. I'll commit it anyway with my sign-off
    because it does not exceed threshold of originality for any copyright.
    
    Change-Id: Id86267f5add539b99229f20bbe339bfb5eb20f8b
    Signed-off-by: Stefan Tauner <stefan.tauner at gmx.at>
---
 util/superiotool/fintek.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/util/superiotool/fintek.c b/util/superiotool/fintek.c
index fc1d3f2..f5a01de 100644
--- a/util/superiotool/fintek.c
+++ b/util/superiotool/fintek.c
@@ -279,6 +279,54 @@ static const struct superio_registers reg_table[] = {
 			{0x00,NANA,NANA,NANA,NANA,NANA,EOT}},
 		{EOT}}},
 	{0x0407, "F81865F/F-I", {
+		{NOLDN, NULL,
+			{0x02,0x07,0x20,0x21,0x23,0x24,0x25,0x26,0x27,0x28,0x29,0x2a-1,0x2a-2,0x2b,0x2c,0x2d,EOT},
+			{NANA,0x00,0x07,0x04,0x19,0x34,NANA,NANA,NANA,0x00,0x00,0x00,0x00,0x1f,0x00,0x08,EOT}},
+		{0x00, "FDC",
+			{0x30,0x60,0x61,0x70,0x74,0xf0,0xf2,0xf4,EOT},
+			{NANA,0x03,0xf0,NANA,NANA,NANA,NANA,NANA,EOT}},
+		{0x03, "LPT",
+			{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+			{NANA,0x03,0x78,NANA,NANA,NANA,EOT}},
+		{0x04, "HWMON",
+			{0x30,0x60,0x61,0x70,EOT},
+			{NANA,0x02,0x95,NANA,EOT}},
+		{0x05, "KBC",
+			{0x30,0x60,0x61,0x70,0x72,0xfe,0xf0,EOT},
+			{NANA,0x00,0x60,NANA,NANA,NANA,0x71,EOT}},
+		{0x06, "GPIO",
+			{0x30,0x60,0x61,0x70,0xf1,0xf2,0xf3,0xf3,0xf4,0xf5,0xf6,0xf7,0xf8,0xf9,0xe0,0xe1,0xe2,0xe3,0xef,0xd0,0xd1,0xd2,0xd3,0xc0,0xc1,0xc2,0xc3,0xb0,0xb1,0xb2,0xb3,0xa0,0xa1,0xa2,0xa3,0x90,0x91,0x92,0x93,EOT},
+			{NANA,0x00,0x60,NANA,0x00,NANA,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,NANA,0x00,NANA,0x00,0xff,NANA,0x00,0x00,0xff,NANA,0x00,0x00,0xff,NANA,0x00,0x00,0xff,NANA,0x00,NANA,NANA,NANA,NANA,EOT}},
+		{0x07, "WDT",
+			{0x30,0x60,0x61,0xf5,0xf6,0xfa,EOT},
+			{NANA,0x00,0x00,0x00,0x00,NANA,EOT}},
+		{0x08, "SPI",
+			{0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xf8,0xfa,0xfb,0xfc,0xfd,0xfe,0xff,EOT},
+			{0x10,0x04,NANA,NANA,0x00,0x00,NANA,NANA,0x00,0x00,0x00,0x00,0x00,0x00,0x00,EOT}},
+		{0x0a, "PME & ACPI",
+			{0x30,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,EOT},
+			{NANA,NANA,NANA,NANA,NANA,0x06,NANA,0x00,EOT}},
+		{0x0b, "RTC",
+			{0x30,0x60,0x61,0x70,EOT},
+			{NANA,0x00,0x00,NANA,EOT}},
+		{0x10, "UART1",
+			{0x30,0x60,0x61,0x70,0xf0,0xf2,0xf4,0xf5,EOT},
+			{NANA,0x03,0xf8,NANA,NANA,NANA,0x00,0x00,EOT}},
+		{0x11, "UART2",
+			{0x30,0x60,0x61,0x70,0xf0,0xf2,0xf4,0xf5,EOT},
+			{NANA,0x02,0xf8,NANA,NANA,NANA,0x00,0x00,EOT}},
+		{0x12, "UART3",
+			{0x30,0x60,0x61,0x70,0xf0,0xf2,0xf4,0xf5,EOT},
+			{NANA,0x03,0xe8,NANA,NANA,NANA,0x00,0x00,EOT}},
+		{0x13, "UART4",
+			{0x30,0x60,0x61,0x70,0xf0,0xf2,0xf4,0xf5,EOT},
+			{NANA,0x02,0xe8,NANA,NANA,NANA,0x00,0x00,EOT}},
+		{0x14, "UART5",
+			{0x30,0x60,0x61,0x70,0xf0,0xf2,0xf4,0xf5,EOT},
+			{NANA,0x00,0x00,NANA,NANA,NANA,0x00,0x00,EOT}},
+		{0x15, "UART6",
+			{0x30,0x60,0x61,0x70,0xf0,0xf2,0xf4,0xf5,EOT},
+			{NANA,0x00,0x00,NANA,NANA,NANA,0x00,0x00,EOT}},
 		{EOT}}},
 	{EOT}
 };



From u9012063 at gmail.com  Thu Sep  6 02:19:24 2012
From: u9012063 at gmail.com (William Tu)
Date: Wed, 5 Sep 2012 20:19:24 -0400
Subject: [coreboot] Large BAR size crashes the BIOS
Message-ID: <CALDO+SZW_0cPFFq_hUVVr7UN=JzzGh=A=+bcvvYM--angG_4Pw@mail.gmail.com>

Hey Guys,

I'm newbie to PC BIOS and would like to ask a couple of questions.

I had a PCIe device (it's an NTB device) with default the size of its
BAR2 is 64M. I boot up my machine and reprogram the BAR2 size to 2G
and reboot. Then I found I no longer to boot up my Desktop (ASUS),
even when I unplug the PCIe deivce. There is no POST message shown up,
no beeps, and nothing shown on screen. I guess requesting 2G PCI space
causes address space overflow and overwrite the BIOS code?

I'm really curious about the reason so I start looking at the coreboot
code in LXR to see how BIOS handles large PCI device space. Can
someone give me some directions in the source code?

1. Where is the address assignment / predefined address location for
all the devices?
2. Is there a upper limit for PCI bar size? or is there an address
range defined for all PCI devices? I checked the pci_read_rom_resource
and it seems not having an upper bound.
3. Is BIOS running at real mode or protected mode?
4. Is there an upper address limit that a BIOS can address? Someone
told me BIOS can only addresses up to 8G.

btw, I'm using the BIOS code from ASUS (model: P8Q67)

Thanks a lot!
William Tu



From marcj303 at gmail.com  Thu Sep  6 19:47:15 2012
From: marcj303 at gmail.com (Marc Jones)
Date: Thu, 6 Sep 2012 11:47:15 -0600
Subject: [coreboot] help finding a quote
In-Reply-To: <CAP6exYJbNvKauKUfVYQ=KCz2ZFrw+QfyZDTctQpap8-pvLbVkw@mail.gmail.com>
References: <CAP6exYJbNvKauKUfVYQ=KCz2ZFrw+QfyZDTctQpap8-pvLbVkw@mail.gmail.com>
Message-ID: <CALrs_3hvUhJsJ3ai_cDbjAKtqTTzws52DEZCJWTnaZ4V9-GKzA@mail.gmail.com>

On Mon, Aug 27, 2012 at 11:16 AM, ron minnich <rminnich at gmail.com> wrote:
> I'm told that somewhere, recently, a note appeared on a blog/mailing
> list/irc to the effect of 'you can do a bios in 100 lines, coreboot
> just makes it hard'. I'd like to see that quote for a talk I'm
> preparing, if someone can find it.
>
> ron

Did you ever find this? I'd like to see the context.

Marc


-- 
http://se-eng.com



From gerrit at coreboot.org  Thu Sep  6 19:51:06 2012
From: gerrit at coreboot.org (gerrit at coreboot.org)
Date: Thu, 6 Sep 2012 19:51:06 +0200
Subject: [coreboot] Patch merged into coreboot/master: f47db2b superiotool:
	Add support for Fintek F81865F/F-I register dump.
References: <Id86267f5add539b99229f20bbe339bfb5eb20f8b+0@gerrit.coreboot.org>
Message-ID: <E1T9gEM-0006EU-Fy@ra.coresystems.de>

the following patch was just integrated into master:
commit f47db2b91f77c2a8fdca0036a83539012c86c254
Author: Stefan Tauner <stefan.tauner at gmx.at>
Date:   Thu Sep 6 10:38:49 2012 +0200

    superiotool: Add support for Fintek F81865F/F-I register dump.
    
    Datasheet: http://www.fintek.com.tw/files/productfiles/F81865_V028P.pdf
    
    The code was done by Juha Tuomala <Juha.Tuomala at iki.fi> but he refused
    to sign it off, or commit it for review. I'll commit it anyway with my sign-off
    because it does not exceed threshold of originality for any copyright.
    
    Change-Id: Id86267f5add539b99229f20bbe339bfb5eb20f8b
    Signed-off-by: Stefan Tauner <stefan.tauner at gmx.at>

Build-Tested: build bot (Jenkins) at Thu Sep  6 10:57:44 2012, giving +1
Reviewed-By: Stefan Reinauer <stefan.reinauer at coreboot.org> at Thu Sep  6 19:51:05 2012, giving +2
See http://review.coreboot.org/1496 for details.

-gerrit



From gerrit at coreboot.org  Thu Sep  6 19:53:29 2012
From: gerrit at coreboot.org (gerrit at coreboot.org)
Date: Thu, 6 Sep 2012 19:53:29 +0200
Subject: [coreboot] Patch merged into coreboot/master: a9e23fc IEI/KINO:
	Fixes an apparent ACPI VGA resource collision.
References: <Ica4b79d798a269399341868b1c793ce745aa93fc+0@gerrit.coreboot.org>
Message-ID: <E1T9gGf-0006Tv-Mb@ra.coresystems.de>

the following patch was just integrated into master:
commit a9e23fc50614a8e5fb8cdedc32530471372e8902
Author: Dave Frodin <dave.frodin at se-eng.com>
Date:   Wed Aug 22 11:10:41 2012 -0600

    IEI/KINO: Fixes an apparent ACPI VGA resource collision.
    
    Without this change 64 bit versions of Windows will BSOD.
    
    Change-Id: Ica4b79d798a269399341868b1c793ce745aa93fc
    Signed-off-by: Dave Frodin <dave.frodin at se-eng.com>

Build-Tested: build bot (Jenkins) at Sat Aug 25 02:53:57 2012, giving +1
Reviewed-By: Stefan Reinauer <stefan.reinauer at coreboot.org> at Thu Sep  6 19:53:28 2012, giving +2
See http://review.coreboot.org/1480 for details.

-gerrit



From rminnich at gmail.com  Fri Sep  7 06:17:12 2012
From: rminnich at gmail.com (ron minnich)
Date: Thu, 6 Sep 2012 21:17:12 -0700
Subject: [coreboot] help finding a quote
In-Reply-To: <CALrs_3hvUhJsJ3ai_cDbjAKtqTTzws52DEZCJWTnaZ4V9-GKzA@mail.gmail.com>
References: <CAP6exYJbNvKauKUfVYQ=KCz2ZFrw+QfyZDTctQpap8-pvLbVkw@mail.gmail.com>
 <CALrs_3hvUhJsJ3ai_cDbjAKtqTTzws52DEZCJWTnaZ4V9-GKzA@mail.gmail.com>
Message-ID: <CAP6exYJvoV737Qi3zx5cPmrw2dquW0+VK-av7rhgEr63jdxRLQ@mail.gmail.com>

never found it ...

ron



From hoangtung1005 at gmail.com  Fri Sep  7 06:43:27 2012
From: hoangtung1005 at gmail.com (=?ISO-8859-1?Q?Ho=E0ng_T=F9ng?=)
Date: Fri, 7 Sep 2012 11:43:27 +0700
Subject: [coreboot] Coreboot with a Linux kernel and initramfs as
	payload.
In-Reply-To: <CAP6exYK5OfvgXbDG4tySsVosN0KUqoYDpkYRkkvBt-g8OG48uA@mail.gmail.com>
References: <CAP3xdAsVtL_prP0qOiZiAD5BzK8v87Rz2zt_vaz0ZniNm8A_gw@mail.gmail.com>
 <CAP6exYLTObvfa_V2OFiY3XV6iQNrz36UTGv7zRT1gSXdW8FMAQ@mail.gmail.com>
 <CAP3xdAsWvpbocoBa7HSCtYEzffYZj_5LTD9xSC8oVie0w3mWsQ@mail.gmail.com>
 <CAP6exYK5OfvgXbDG4tySsVosN0KUqoYDpkYRkkvBt-g8OG48uA@mail.gmail.com>
Message-ID: <CAP3xdAsR_SvBmaDdroCaf+TX0r7GyitEOiSmdW4iPhEy7Uj8ag@mail.gmail.com>

Hi Ron

Here is my result :
I finished to build a kernel image that contains the kernel, initramfs, and
command line args.
I expect output is bootable kernel ELF image but it's kernel format ( not
ELF )

*
$ file arch/x86/boot/bzImage
*
*
arch/x86/boot/bzImage: Linux kernel x86 boot executable bzImage, version
2.6.34.13 (root at tungPC) #10 Fri Sep 7 10:11:28 ICT 2012, RO-rootFS,
root_dev 0x802, swap_dev 0x4, Normal VGA
*

And when I build coreboot , it didn't understand format of my kernel image
Error :

* PAYLOAD
 /media/Working/Working/MKMP/LinuxBios/linux-2.6.34.13/arch/x86/boot/bzImage
(compression: LZMA)*
*Fatal error: the payload file is not in ELF format!*
*make: *** [build/coreboot.rom] Error 1*


Could you give me some advice ?

On Tue, Sep 4, 2012 at 10:40 AM, ron minnich <rminnich at gmail.com> wrote:

> On Mon, Sep 3, 2012 at 8:34 PM, Ho?ng T?ng <hoangtung1005 at gmail.com>
> wrote:
>
> > Now I will try to build a kernel image that contains the kernel,
> initramfs,
> > and command line args.
>
> This should work. It has worked in the past for me.
>
> ron
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120907/fa1dd234/attachment.html>

From gerrit at coreboot.org  Fri Sep  7 11:24:43 2012
From: gerrit at coreboot.org (Siyuan Wang (wangsiyuanbuaa@gmail.com))
Date: Fri, 7 Sep 2012 11:24:43 +0200
Subject: [coreboot] New patch to review for coreboot: f844682 C32 legacy
	code: change CONFIG_CPU_AMD_SOCKET_C32 to
	CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA
References: <If6114bf8912e78b7732f25a1adfb2e4d8eb10ee4+0@gerrit.coreboot.org>
Message-ID: <If6114bf8912e78b7732f25a1adfb2e4d8eb10ee4+1@gerrit.coreboot.org>

Siyuan Wang (wangsiyuanbuaa at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1497

-gerrit

commit f8446823a5cb0716fe64bd8667c8c97179dd8b16
Author: Siyuan Wang <wangsiyuanbuaa at gmail.com>
Date:   Fri Sep 7 18:35:17 2012 +0800

    C32 legacy code: change CONFIG_CPU_AMD_SOCKET_C32 to CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA
    
    Currently the C32 has some legacy boards which use the old C32 code. We need to seperate them.
    CONFIG_CPU_AMD_SOCKET_C32 was used in legacy code before.
    But it is not a good idea, so we change the code as follows:
    So we use CONFIG_CPU_AMD_SOCKET_C32 to identify mainboard which uses agesa code,
    and use  CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA to identify mainboard which uses legacy code.
    
    Change-Id: If6114bf8912e78b7732f25a1adfb2e4d8eb10ee4
    Signed-off-by: Siyuan Wang <SiYuan.Wang at amd.com>
    Signed-off-by: Siyuan Wang <wangsiyuanbuaa at gmail.com>
---
 src/cpu/amd/Makefile.inc                     |  2 +-
 src/cpu/amd/socket_C32/Kconfig               | 14 +++++++-------
 src/mainboard/supermicro/h8scm_fam10/Kconfig |  2 +-
 3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/src/cpu/amd/Makefile.inc b/src/cpu/amd/Makefile.inc
index 6663d14..85ce7f6 100644
--- a/src/cpu/amd/Makefile.inc
+++ b/src/cpu/amd/Makefile.inc
@@ -7,7 +7,7 @@ subdirs-$(CONFIG_CPU_AMD_SOCKET_AM2) += socket_AM2
 subdirs-$(CONFIG_CPU_AMD_SOCKET_AM2R2) += socket_AM2r2
 subdirs-$(CONFIG_CPU_AMD_SOCKET_AM3) += socket_AM3
 subdirs-$(CONFIG_CPU_AMD_SOCKET_ASB2) += socket_ASB2
-subdirs-$(CONFIG_CPU_AMD_SOCKET_C32) += socket_C32
+subdirs-$(CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA) += socket_C32
 subdirs-$(CONFIG_CPU_AMD_GEODE_GX1) += geode_gx1
 subdirs-$(CONFIG_CPU_AMD_GEODE_GX2) += geode_gx2
 subdirs-$(CONFIG_CPU_AMD_GEODE_LX) += geode_lx
diff --git a/src/cpu/amd/socket_C32/Kconfig b/src/cpu/amd/socket_C32/Kconfig
index 56324dc..db4b624 100644
--- a/src/cpu/amd/socket_C32/Kconfig
+++ b/src/cpu/amd/socket_C32/Kconfig
@@ -1,4 +1,4 @@
-config CPU_AMD_SOCKET_C32
+config CPU_AMD_SOCKET_C32_NON_AGESA
 	bool
 	select CPU_AMD_MODEL_10XXX
 	select HT3_SUPPORT
@@ -8,30 +8,30 @@ config CPU_AMD_SOCKET_C32
 config CPU_SOCKET_TYPE
 	hex
 	default 0x14
-	depends on CPU_AMD_SOCKET_C32
+	depends on CPU_AMD_SOCKET_C32_NON_AGESA
 
 config EXT_RT_TBL_SUPPORT
 	bool
 	default n
-	depends on CPU_AMD_SOCKET_C32
+	depends on CPU_AMD_SOCKET_C32_NON_AGESA
 
 config EXT_CONF_SUPPORT
 	bool
 	default n
-	depends on CPU_AMD_SOCKET_C32
+	depends on CPU_AMD_SOCKET_C32_NON_AGESA
 
 config CBB
 	hex
 	default 0x0
-	depends on CPU_AMD_SOCKET_C32
+	depends on CPU_AMD_SOCKET_C32_NON_AGESA
 
 config CDB
 	hex
 	default 0x18
-	depends on CPU_AMD_SOCKET_C32
+	depends on CPU_AMD_SOCKET_C32_NON_AGESA
 
 config XIP_ROM_SIZE
 	hex
 	default 0x80000
-	depends on CPU_AMD_SOCKET_C32
+	depends on CPU_AMD_SOCKET_C32_NON_AGESA
 
diff --git a/src/mainboard/supermicro/h8scm_fam10/Kconfig b/src/mainboard/supermicro/h8scm_fam10/Kconfig
index 844763e..44f2d43 100644
--- a/src/mainboard/supermicro/h8scm_fam10/Kconfig
+++ b/src/mainboard/supermicro/h8scm_fam10/Kconfig
@@ -3,7 +3,7 @@ if BOARD_SUPERMICRO_H8SCM_FAM10
 config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
 	select ARCH_X86
-	select CPU_AMD_SOCKET_C32
+	select CPU_AMD_SOCKET_C32_NON_AGESA
 	select DIMM_DDR3
 	select DIMM_REGISTERED
 	select NORTHBRIDGE_AMD_AMDFAM10



From gerrit at coreboot.org  Fri Sep  7 11:24:43 2012
From: gerrit at coreboot.org (Siyuan Wang (wangsiyuanbuaa@gmail.com))
Date: Fri, 7 Sep 2012 11:24:43 +0200
Subject: [coreboot] New patch to review for coreboot: fa0ab5c agesa fam15
	northbridge: change lapic_id to accommodate two CPUs
References: <Ib3263fc6f5508f744b81e8e388fde9ccd9b51851+0@gerrit.coreboot.org>
Message-ID: <Ib3263fc6f5508f744b81e8e388fde9ccd9b51851+1@gerrit.coreboot.org>

Siyuan Wang (wangsiyuanbuaa at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1498

-gerrit

commit fa0ab5c0cfb876f686ab834f63e3c4943a1caa9e
Author: Siyuan Wang <wangsiyuanbuaa at gmail.com>
Date:   Fri Sep 7 19:03:24 2012 +0800

    agesa fam15 northbridge: change lapic_id to accommodate two CPUs
    
    According to http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/vendorcode/amd/agesa/f15/Proc/CPU/cpuApicUtilities.c;hb=HEAD#l273 line 273,
    adjust apic id to accommodate two CPUs.
    The Tyan S8226 has two CPU sockets, and the current code just finds one CPU's cores.
    we adjust apic_id in cpu_bus_scan so as to find all CPUs.
    
    Change-Id: Ib3263fc6f5508f744b81e8e388fde9ccd9b51851
    Signed-off-by: Siyuan Wang <SiYuan.Wang at amd.com>
    Signed-off-by: Siyuan Wang <wangsiyuanbuaa at gmail.com>
---
 src/northbridge/amd/agesa/family15/northbridge.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/northbridge/amd/agesa/family15/northbridge.c b/src/northbridge/amd/agesa/family15/northbridge.c
index da67af4..c4fc6a8 100644
--- a/src/northbridge/amd/agesa/family15/northbridge.c
+++ b/src/northbridge/amd/agesa/family15/northbridge.c
@@ -1047,7 +1047,6 @@ static u32 cpu_bus_scan(device_t dev, u32 max)
 
 		for (j = 0; j <= siblings; j++ ) {
 			extern CONST OPTIONS_CONFIG_TOPOLOGY ROMDATA TopologyConfiguration;
-			u32 modules = TopologyConfiguration.PlatformNumberOfModules;
 			u32 lapicid_start = 0;
 
 			/*
@@ -1071,7 +1070,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max)
 				lapicid_start = (lapicid_start + 1) * core_max;
 				printk(BIOS_SPEW, "lpaicid_start=0x%x ", lapicid_start);
 			}
-			u32 apic_id = (lapicid_start * (i/modules + 1)) + ((i % modules) ? (j + (siblings + 1)) : j);
+			u32 apic_id = (i * core_max) + j + lapicid_start;
 			printk(BIOS_SPEW, "node 0x%x core 0x%x apicid=0x%x\n",
 					i, j, apic_id);
 



From gerrit at coreboot.org  Fri Sep  7 11:24:44 2012
From: gerrit at coreboot.org (Siyuan Wang (wangsiyuanbuaa@gmail.com))
Date: Fri, 7 Sep 2012 11:24:44 +0200
Subject: [coreboot] New patch to review for coreboot: 00eaf4d cimx sb700:
	change Platform.h to remove some warnings
References: <I24979e08b83434f91a8fa37cd9f16303fa0b298d+0@gerrit.coreboot.org>
Message-ID: <I24979e08b83434f91a8fa37cd9f16303fa0b298d+1@gerrit.coreboot.org>

Siyuan Wang (wangsiyuanbuaa at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1499

-gerrit

commit 00eaf4d61f21aa7cf477a10b8161e6d0c320c594
Author: Siyuan Wang <wangsiyuanbuaa at gmail.com>
Date:   Fri Sep 7 19:16:58 2012 +0800

    cimx sb700: change Platform.h to remove some warnings
    
    TRACE has redefined warnings in src/southbridge/amd/cimx/sb700/Platform.h,
    so we do some changes to remove such warnings.
    
    Change-Id: I24979e08b83434f91a8fa37cd9f16303fa0b298d
    Signed-off-by: Siyuan Wang <SiYuan.Wang at amd.com>
    Signed-off-by: Siyuan Wang <wangsiyuanbuaa at gmail.com>
---
 src/southbridge/amd/cimx/sb700/Platform.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/src/southbridge/amd/cimx/sb700/Platform.h b/src/southbridge/amd/cimx/sb700/Platform.h
index d70345d..d731edf 100644
--- a/src/southbridge/amd/cimx/sb700/Platform.h
+++ b/src/southbridge/amd/cimx/sb700/Platform.h
@@ -60,6 +60,9 @@ void    TraceCode ( UINT32 Level, UINT32 Code);
 #define TRACECODE(Arguments)
 #endif
 #else
+	#ifdef TRACE
+		#undef TRACE
+	#endif
 	#if CONFIG_REDIRECT_SBCIMX_TRACE_TO_SERIAL
 		#define TRACE(Arguments) printk Arguments
 	#else



From gerrit at coreboot.org  Fri Sep  7 11:24:44 2012
From: gerrit at coreboot.org (Siyuan Wang (wangsiyuanbuaa@gmail.com))
Date: Fri, 7 Sep 2012 11:24:44 +0200
Subject: [coreboot] Patch set updated for coreboot: fbc9bc1 superio winbond
	w83627dhg: add a function which is used on tyan s8226
References: <I5f7fa535b922b224e381886f1bea64623fa549ef+0@gerrit.coreboot.org>
Message-ID: <I5f7fa535b922b224e381886f1bea64623fa549ef+2@gerrit.coreboot.org>

Siyuan Wang (wangsiyuanbuaa at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1494

-gerrit

commit fbc9bc1318c6ee554f0827fadd148d779173b59d
Author: Siyuan Wang <wangsiyuanbuaa at gmail.com>
Date:   Fri Sep 7 19:18:16 2012 +0800

    superio winbond w83627dhg: add a function which is used on tyan s8226
    
    this function is used on serial output of tyan s8226
    
    Change-Id: I5f7fa535b922b224e381886f1bea64623fa549ef
    Signed-off-by: Siyuan Wang <SiYuan.Wang at amd.com>
    Signed-off-by: Siyuan Wang <wangsiyuanbuaa at gmail.com>
---
 src/superio/winbond/w83627dhg/early_serial.c | 10 ++++++++++
 src/superio/winbond/w83627dhg/w83627dhg.h    |  1 +
 2 files changed, 11 insertions(+)

diff --git a/src/superio/winbond/w83627dhg/early_serial.c b/src/superio/winbond/w83627dhg/early_serial.c
index e0be8de..39ce8bf 100644
--- a/src/superio/winbond/w83627dhg/early_serial.c
+++ b/src/superio/winbond/w83627dhg/early_serial.c
@@ -67,3 +67,13 @@ void w83627dhg_enable_i2c(device_t dev)
 	pnp_exit_ext_func_mode(dev);
 }
 
+void w83627dhg_set_clksel_48(device_t dev)
+{
+	u8 reg8;
+
+	pnp_enter_ext_func_mode(dev);
+	reg8 = pnp_read_config(dev, 0x24);
+	reg8 |= (1 << 6); /* Set CLKSEL (clock input on pin 1) to 48MHz. */
+	pnp_write_config(dev, 0x24, reg8);
+	pnp_exit_ext_func_mode(dev);
+}
diff --git a/src/superio/winbond/w83627dhg/w83627dhg.h b/src/superio/winbond/w83627dhg/w83627dhg.h
index 158e60b..3aa1b26 100644
--- a/src/superio/winbond/w83627dhg/w83627dhg.h
+++ b/src/superio/winbond/w83627dhg/w83627dhg.h
@@ -56,5 +56,6 @@ void pnp_enter_ext_func_mode(device_t dev);
 void pnp_exit_ext_func_mode(device_t dev);
 void w83627dhg_enable_serial(device_t dev, u16 iobase);
 void w83627dhg_enable_i2c(device_t dev);
+void w83627dhg_set_clksel_48(device_t dev);
 
 #endif



From gerrit at coreboot.org  Fri Sep  7 11:24:44 2012
From: gerrit at coreboot.org (Siyuan Wang (wangsiyuanbuaa@gmail.com))
Date: Fri, 7 Sep 2012 11:24:44 +0200
Subject: [coreboot] Patch set updated for coreboot: 84747b6 add tyan s8226:
	add a new mainboard
References: <I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608+0@gerrit.coreboot.org>
Message-ID: <I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608+2@gerrit.coreboot.org>

Siyuan Wang (wangsiyuanbuaa at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1495

-gerrit

commit 84747b67040409d89ccbc0a6d39d5da9e66c563c
Author: Siyuan Wang <wangsiyuanbuaa at gmail.com>
Date:   Fri Sep 7 19:20:02 2012 +0800

    add tyan s8226: add a new mainboard
    
    our code supports tyan s8226 now, which has two cpus on the board
    the cpu socket is C32. The details of tyan s8226 is:
    http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=679&SKU=600000190
    
    Change-Id: I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608
    Signed-off-by: Siyuan Wang <SiYuan.Wang at amd.com>
    Signed-off-by: Siyuan Wang <wangsiyuanbuaa at gmail.com>
---
 src/mainboard/tyan/Kconfig                |    4 +-
 src/mainboard/tyan/s8226/BiosCallOuts.c   |  516 +++++++++
 src/mainboard/tyan/s8226/BiosCallOuts.h   |   78 ++
 src/mainboard/tyan/s8226/Kconfig          |  127 ++
 src/mainboard/tyan/s8226/Makefile.inc     |   45 +
 src/mainboard/tyan/s8226/OptionsIds.h     |   67 ++
 src/mainboard/tyan/s8226/acpi/ide.asl     |  244 ++++
 src/mainboard/tyan/s8226/acpi/routing.asl |  222 ++++
 src/mainboard/tyan/s8226/acpi/sata.asl    |  149 +++
 src/mainboard/tyan/s8226/acpi/usb.asl     |  161 +++
 src/mainboard/tyan/s8226/acpi_tables.c    |  319 +++++
 src/mainboard/tyan/s8226/agesawrapper.c   | 1204 +++++++++++++++++++
 src/mainboard/tyan/s8226/agesawrapper.h   |   87 ++
 src/mainboard/tyan/s8226/buildOpts.c      |  616 ++++++++++
 src/mainboard/tyan/s8226/cmos.layout      |  118 ++
 src/mainboard/tyan/s8226/devicetree.cb    |  128 ++
 src/mainboard/tyan/s8226/dimmSpd.c        |  222 ++++
 src/mainboard/tyan/s8226/dsdt.asl         | 1794 +++++++++++++++++++++++++++++
 src/mainboard/tyan/s8226/fadt.c           |  174 +++
 src/mainboard/tyan/s8226/get_bus_conf.c   |  144 +++
 src/mainboard/tyan/s8226/irq_tables.c     |  122 ++
 src/mainboard/tyan/s8226/mainboard.c      |   78 ++
 src/mainboard/tyan/s8226/mptable.c        |  196 ++++
 src/mainboard/tyan/s8226/platform_cfg.h   |   54 +
 src/mainboard/tyan/s8226/platform_oem.c   |   50 +
 src/mainboard/tyan/s8226/rd890_cfg.c      |  274 +++++
 src/mainboard/tyan/s8226/rd890_cfg.h      |  174 +++
 src/mainboard/tyan/s8226/reset.c          |   66 ++
 src/mainboard/tyan/s8226/romstage.c       |  148 +++
 src/mainboard/tyan/s8226/sb700_cfg.c      |  142 +++
 src/mainboard/tyan/s8226/sb700_cfg.h      |  237 ++++
 31 files changed, 7959 insertions(+), 1 deletion(-)

diff --git a/src/mainboard/tyan/Kconfig b/src/mainboard/tyan/Kconfig
index 01e4f35..25e3069 100644
--- a/src/mainboard/tyan/Kconfig
+++ b/src/mainboard/tyan/Kconfig
@@ -51,7 +51,8 @@ config BOARD_TYAN_S4880
 	bool "S4880 (Thunder K8QS)"
 config BOARD_TYAN_S4882
 	bool "S4882 (Thunder K8QS Pro)"
-
+config BOARD_TYAN_S8226
+        bool "S8226"
 endchoice
 
 source "src/mainboard/tyan/s1846/Kconfig"
@@ -69,6 +70,7 @@ source "src/mainboard/tyan/s2912/Kconfig"
 source "src/mainboard/tyan/s2912_fam10/Kconfig"
 source "src/mainboard/tyan/s4880/Kconfig"
 source "src/mainboard/tyan/s4882/Kconfig"
+source "src/mainboard/tyan/s8226/Kconfig"
 
 config MAINBOARD_VENDOR
 	string
diff --git a/src/mainboard/tyan/s8226/BiosCallOuts.c b/src/mainboard/tyan/s8226/BiosCallOuts.c
new file mode 100644
index 0000000..b7f0124
--- /dev/null
+++ b/src/mainboard/tyan/s8226/BiosCallOuts.c
@@ -0,0 +1,516 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "agesawrapper.h"
+#include "amdlib.h"
+#include "BiosCallOuts.h"
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+
+STATIC BIOS_CALLOUT_STRUCT BiosCallouts[REQUIRED_CALLOUTS] =
+{
+	{
+		AGESA_ALLOCATE_BUFFER,
+		BiosAllocateBuffer
+	},
+
+	{
+		AGESA_DEALLOCATE_BUFFER,
+		BiosDeallocateBuffer
+	},
+
+	{
+		AGESA_DO_RESET,
+		BiosReset
+	},
+
+	{
+		AGESA_LOCATE_BUFFER,
+		BiosLocateBuffer
+	},
+
+	{
+		AGESA_READ_SPD,
+		BiosReadSpd
+	},
+
+	{
+		AGESA_READ_SPD_RECOVERY,
+		BiosDefaultRet
+	},
+
+	{
+		AGESA_RUNFUNC_ONAP,
+		BiosRunFuncOnAp
+	},
+
+	{
+		AGESA_GET_IDS_INIT_DATA,
+		BiosGetIdsInitData
+	},
+
+	{
+		AGESA_HOOKBEFORE_DQS_TRAINING,
+		BiosHookBeforeDQSTraining
+	},
+
+	{
+		AGESA_HOOKBEFORE_DRAM_INIT,
+		BiosHookBeforeDramInit
+	},
+	{
+		AGESA_HOOKBEFORE_EXIT_SELF_REF,
+		BiosHookBeforeExitSelfRefresh
+	},
+};
+
+extern AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info);
+
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINTN i;
+	AGESA_STATUS CalloutStatus;
+
+	for (i = 0; i < REQUIRED_CALLOUTS; i++) {
+		if (BiosCallouts[i].CalloutName == Func) {
+			break;
+		}
+	}
+
+	if(i >= REQUIRED_CALLOUTS) {
+		return AGESA_UNSUPPORTED;
+	}
+
+	CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
+
+	return CalloutStatus;
+}
+
+
+CONST IDS_NV_ITEM IdsData[] =
+{
+	/*{
+	  AGESA_IDS_NV_MAIN_PLL_CON,
+	  0x1
+	  },
+	  {
+	  AGESA_IDS_NV_MAIN_PLL_FID_EN,
+	  0x1
+	  },
+	  {
+	  AGESA_IDS_NV_MAIN_PLL_FID,
+	  0x8
+	  },
+
+	  {
+	  AGESA_IDS_NV_CUSTOM_NB_PSTATE,
+	  },
+	  {
+	  AGESA_IDS_NV_CUSTOM_NB_P0_DIV_CTRL,
+	  },
+	  {
+	  AGESA_IDS_NV_CUSTOM_NB_P1_DIV_CTRL,
+	  },
+	  {
+	  AGESA_IDS_NV_FORCE_NB_PSTATE,
+	  },
+	 */
+	{
+		0xFFFF,
+		0xFFFF
+	}
+};
+
+#define   NUM_IDS_ENTRIES    (sizeof (IdsData) / sizeof (IDS_NV_ITEM))
+
+AGESA_STATUS BiosGetIdsInitData (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINTN   i;
+	IDS_NV_ITEM *IdsPtr;
+
+	IdsPtr = ((IDS_CALLOUT_STRUCT *) ConfigPtr)->IdsNvPtr;
+
+	if (Data == IDS_CALLOUT_INIT) {
+		for (i = 0; i < NUM_IDS_ENTRIES; i++) {
+			IdsPtr[i].IdsNvValue = IdsData[i].IdsNvValue;
+			IdsPtr[i].IdsNvId = IdsData[i].IdsNvId;
+		}
+	}
+	return AGESA_SUCCESS;
+}
+
+
+AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINT32              AvailableHeapSize;
+	UINT8               *BiosHeapBaseAddr;
+	UINT32              CurrNodeOffset;
+	UINT32              PrevNodeOffset;
+	UINT32              FreedNodeOffset;
+	UINT32              BestFitNodeOffset;
+	UINT32              BestFitPrevNodeOffset;
+	UINT32              NextFreeOffset;
+	BIOS_BUFFER_NODE   *CurrNodePtr;
+	BIOS_BUFFER_NODE   *FreedNodePtr;
+	BIOS_BUFFER_NODE   *BestFitNodePtr;
+	BIOS_BUFFER_NODE   *BestFitPrevNodePtr;
+	BIOS_BUFFER_NODE   *NextFreePtr;
+	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
+	AGESA_BUFFER_PARAMS *AllocParams;
+
+	AllocParams = ((AGESA_BUFFER_PARAMS *) ConfigPtr);
+	AllocParams->BufferPointer = NULL;
+
+	AvailableHeapSize = BIOS_HEAP_SIZE - sizeof (BIOS_HEAP_MANAGER);
+	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+	if (BiosHeapBasePtr->StartOfAllocatedNodes == 0) {
+		/* First allocation */
+		CurrNodeOffset = sizeof (BIOS_HEAP_MANAGER);
+		CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+		CurrNodePtr->BufferHandle = AllocParams->BufferHandle;
+		CurrNodePtr->BufferSize = AllocParams->BufferLength;
+		CurrNodePtr->NextNodeOffset = 0;
+		AllocParams->BufferPointer = (UINT8 *) CurrNodePtr + sizeof (BIOS_BUFFER_NODE);
+
+		/* Update the remaining free space */
+		FreedNodeOffset = CurrNodeOffset + CurrNodePtr->BufferSize + sizeof (BIOS_BUFFER_NODE);
+		FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+		FreedNodePtr->BufferSize = AvailableHeapSize - sizeof (BIOS_BUFFER_NODE) - CurrNodePtr->BufferSize;
+		FreedNodePtr->NextNodeOffset = 0;
+
+		/* Update the offsets for Allocated and Freed nodes */
+		BiosHeapBasePtr->StartOfAllocatedNodes = CurrNodeOffset;
+		BiosHeapBasePtr->StartOfFreedNodes = FreedNodeOffset;
+	} else {
+		/* Find out whether BufferHandle has been allocated on the heap. */
+		/* If it has, return AGESA_BOUNDS_CHK */
+		CurrNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+		CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+
+		while (CurrNodeOffset != 0) {
+			CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+			if (CurrNodePtr->BufferHandle == AllocParams->BufferHandle) {
+				return AGESA_BOUNDS_CHK;
+			}
+			CurrNodeOffset = CurrNodePtr->NextNodeOffset;
+			/* If BufferHandle has not been allocated on the heap, CurrNodePtr here points
+			   to the end of the allocated nodes list.
+			 */
+
+		}
+		/* Find the node that best fits the requested buffer size */
+		FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
+		PrevNodeOffset = FreedNodeOffset;
+		BestFitNodeOffset = 0;
+		BestFitPrevNodeOffset = 0;
+		while (FreedNodeOffset != 0) {
+			FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+			if (FreedNodePtr->BufferSize >= (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
+				if (BestFitNodeOffset == 0) {
+					/* First node that fits the requested buffer size */
+					BestFitNodeOffset = FreedNodeOffset;
+					BestFitPrevNodeOffset = PrevNodeOffset;
+				} else {
+					/* Find out whether current node is a better fit than the previous nodes */
+					BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
+					if (BestFitNodePtr->BufferSize > FreedNodePtr->BufferSize) {
+						BestFitNodeOffset = FreedNodeOffset;
+						BestFitPrevNodeOffset = PrevNodeOffset;
+					}
+				}
+			}
+			PrevNodeOffset = FreedNodeOffset;
+			FreedNodeOffset = FreedNodePtr->NextNodeOffset;
+		} /* end of while loop */
+
+
+		if (BestFitNodeOffset == 0) {
+			/* If we could not find a node that fits the requested buffer */
+			/* size, return AGESA_BOUNDS_CHK */
+			return AGESA_BOUNDS_CHK;
+		} else {
+			BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
+			BestFitPrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitPrevNodeOffset);
+
+			/* If BestFitNode is larger than the requested buffer, fragment the node further */
+			if (BestFitNodePtr->BufferSize > (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
+				NextFreeOffset = BestFitNodeOffset + AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE);
+
+				NextFreePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextFreeOffset);
+				NextFreePtr->BufferSize = BestFitNodePtr->BufferSize - (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE));
+				NextFreePtr->NextNodeOffset = BestFitNodePtr->NextNodeOffset;
+			} else {
+				/* Otherwise, next free node is NextNodeOffset of BestFitNode */
+				NextFreeOffset = BestFitNodePtr->NextNodeOffset;
+			}
+
+			/* If BestFitNode is the first buffer in the list, then update
+			   StartOfFreedNodes to reflect the new free node
+			 */
+			if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) {
+				BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset;
+			} else {
+				BestFitPrevNodePtr->NextNodeOffset = NextFreeOffset;
+			}
+
+			/* Add BestFitNode to the list of Allocated nodes */
+			CurrNodePtr->NextNodeOffset = BestFitNodeOffset;
+			BestFitNodePtr->BufferSize = AllocParams->BufferLength;
+			BestFitNodePtr->BufferHandle = AllocParams->BufferHandle;
+			BestFitNodePtr->NextNodeOffset = 0;
+
+			/* Remove BestFitNode from list of Freed nodes */
+			AllocParams->BufferPointer = (UINT8 *) BestFitNodePtr + sizeof (BIOS_BUFFER_NODE);
+		}
+	}
+
+	return AGESA_SUCCESS;
+}
+
+AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+
+	UINT8               *BiosHeapBaseAddr;
+	UINT32              AllocNodeOffset;
+	UINT32              PrevNodeOffset;
+	UINT32              NextNodeOffset;
+	UINT32              FreedNodeOffset;
+	UINT32              EndNodeOffset;
+	BIOS_BUFFER_NODE   *AllocNodePtr;
+	BIOS_BUFFER_NODE   *PrevNodePtr;
+	BIOS_BUFFER_NODE   *FreedNodePtr;
+	BIOS_BUFFER_NODE   *NextNodePtr;
+	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
+	AGESA_BUFFER_PARAMS *AllocParams;
+
+	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+	AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
+
+	/* Find target node to deallocate in list of allocated nodes.
+	   Return AGESA_BOUNDS_CHK if the BufferHandle is not found
+	 */
+	AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+	AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+	PrevNodeOffset = AllocNodeOffset;
+
+	while (AllocNodePtr->BufferHandle !=  AllocParams->BufferHandle) {
+		if (AllocNodePtr->NextNodeOffset == 0) {
+			return AGESA_BOUNDS_CHK;
+		}
+		PrevNodeOffset = AllocNodeOffset;
+		AllocNodeOffset = AllocNodePtr->NextNodeOffset;
+		AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+	}
+
+	/* Remove target node from list of allocated nodes */
+	PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
+	PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
+
+	/* Zero out the buffer, and clear the BufferHandle */
+	LibAmdMemFill ((UINT8 *)AllocNodePtr + sizeof (BIOS_BUFFER_NODE), 0, AllocNodePtr->BufferSize, &(AllocParams->StdHeader));
+	AllocNodePtr->BufferHandle = 0;
+	AllocNodePtr->BufferSize += sizeof (BIOS_BUFFER_NODE);
+
+	/* Add deallocated node in order to the list of freed nodes */
+	FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
+	FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+
+	EndNodeOffset = AllocNodeOffset + AllocNodePtr->BufferSize;
+
+	if (AllocNodeOffset < FreedNodeOffset) {
+		/* Add to the start of the freed list */
+		if (EndNodeOffset == FreedNodeOffset) {
+			/* If the freed node is adjacent to the first node in the list, concatenate both nodes */
+			AllocNodePtr->BufferSize += FreedNodePtr->BufferSize;
+			AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset;
+
+			/* Clear the BufferSize and NextNodeOffset of the previous first node */
+			FreedNodePtr->BufferSize = 0;
+			FreedNodePtr->NextNodeOffset = 0;
+
+		} else {
+			/* Otherwise, add freed node to the start of the list
+			   Update NextNodeOffset and BufferSize to include the
+			   size of BIOS_BUFFER_NODE
+			 */
+			AllocNodePtr->NextNodeOffset = FreedNodeOffset;
+		}
+		/* Update StartOfFreedNodes to the new first node */
+		BiosHeapBasePtr->StartOfFreedNodes = AllocNodeOffset;
+	} else {
+		/* Traverse list of freed nodes to find where the deallocated node
+		   should be place
+		 */
+		NextNodeOffset = FreedNodeOffset;
+		NextNodePtr = FreedNodePtr;
+		while (AllocNodeOffset > NextNodeOffset) {
+			PrevNodeOffset = NextNodeOffset;
+			if (NextNodePtr->NextNodeOffset == 0) {
+				break;
+			}
+			NextNodeOffset = NextNodePtr->NextNodeOffset;
+			NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
+		}
+
+		/* If deallocated node is adjacent to the next node,
+		   concatenate both nodes
+		 */
+		if (NextNodeOffset == EndNodeOffset) {
+			NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
+			AllocNodePtr->BufferSize += NextNodePtr->BufferSize;
+			AllocNodePtr->NextNodeOffset = NextNodePtr->NextNodeOffset;
+
+			NextNodePtr->BufferSize = 0;
+			NextNodePtr->NextNodeOffset = 0;
+		} else {
+			/*AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset; */
+			AllocNodePtr->NextNodeOffset = NextNodeOffset;
+		}
+		/* If deallocated node is adjacent to the previous node,
+		   concatenate both nodes
+		 */
+		PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
+		EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize;
+		if (AllocNodeOffset == EndNodeOffset) {
+			PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
+			PrevNodePtr->BufferSize += AllocNodePtr->BufferSize;
+
+			AllocNodePtr->BufferSize = 0;
+			AllocNodePtr->NextNodeOffset = 0;
+		} else {
+			PrevNodePtr->NextNodeOffset = AllocNodeOffset;
+		}
+	}
+	return AGESA_SUCCESS;
+}
+
+AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINT32              AllocNodeOffset;
+	UINT8               *BiosHeapBaseAddr;
+	BIOS_BUFFER_NODE   *AllocNodePtr;
+	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
+	AGESA_BUFFER_PARAMS *AllocParams;
+
+	AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
+
+	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+	AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+	AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+
+	while (AllocParams->BufferHandle != AllocNodePtr->BufferHandle) {
+		if (AllocNodePtr->NextNodeOffset == 0) {
+			AllocParams->BufferPointer = NULL;
+			AllocParams->BufferLength = 0;
+			return AGESA_BOUNDS_CHK;
+		} else {
+			AllocNodeOffset = AllocNodePtr->NextNodeOffset;
+			AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+		}
+	}
+
+	AllocParams->BufferPointer = (UINT8 *) ((UINT8 *) AllocNodePtr + sizeof (BIOS_BUFFER_NODE));
+	AllocParams->BufferLength = AllocNodePtr->BufferSize;
+
+	return AGESA_SUCCESS;
+
+}
+
+AGESA_STATUS BiosRunFuncOnAp (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS        Status;
+
+	Status = agesawrapper_amdlaterunaptask (Data, ConfigPtr);
+	return Status;
+}
+
+AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS        Status;
+	UINT8                 Value;
+	UINTN               ResetType;
+	AMD_CONFIG_PARAMS   *StdHeader;
+
+	ResetType = Data;
+	StdHeader = ConfigPtr;
+
+	//
+	// Perform the RESET based upon the ResetType. In case of
+	// WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to
+	// AmdResetManager. During the critical condition, where reset is required
+	// immediately, the reset will be invoked directly by writing 0x04 to port
+	// 0xCF9 (Reset Port).
+	//
+	switch (ResetType) {
+		case WARM_RESET_WHENEVER:
+		case COLD_RESET_WHENEVER:
+			break;
+
+		case WARM_RESET_IMMEDIATELY:
+		case COLD_RESET_IMMEDIATELY:
+			Value = 0x06;
+			LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader);
+			break;
+
+		default:
+			break;
+	}
+
+	Status = 0;
+	return Status;
+}
+
+AGESA_STATUS BiosReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS Status;
+	Status = AmdMemoryReadSPD (Func, Data, ConfigPtr);
+
+	return Status;
+}
+
+AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_UNSUPPORTED;
+}
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_SUCCESS;
+}
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_SUCCESS;
+}
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_SUCCESS;
+}
+
diff --git a/src/mainboard/tyan/s8226/BiosCallOuts.h b/src/mainboard/tyan/s8226/BiosCallOuts.h
new file mode 100644
index 0000000..24a05fb
--- /dev/null
+++ b/src/mainboard/tyan/s8226/BiosCallOuts.h
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef _BIOS_CALLOUT_H_
+#define _BIOS_CALLOUT_H_
+
+#include "Porting.h"
+#include "AGESA.h"
+
+#define REQUIRED_CALLOUTS		12
+#define BIOS_HEAP_START_ADDRESS		0x00010000
+#define BIOS_HEAP_SIZE			0x20000   /* 64MB */
+
+typedef struct _BIOS_HEAP_MANAGER {
+	//UINT32 AvailableSize;
+	UINT32 StartOfAllocatedNodes;
+	UINT32 StartOfFreedNodes;
+} BIOS_HEAP_MANAGER;
+
+typedef struct _BIOS_BUFFER_NODE {
+	UINT32 BufferHandle;
+	UINT32 BufferSize;
+	UINT32 NextNodeOffset;
+} BIOS_BUFFER_NODE;
+
+/*
+ * CALLOUTS
+ */
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/* REQUIRED CALLOUTS
+ * AGESA ADVANCED CALLOUTS - CPU
+ */
+AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosRunFuncOnAp (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosGetIdsInitData (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/* AGESA ADVANCED CALLOUTS - MEMORY */
+AGESA_STATUS BiosReadSpd (UINT32  Func,UINT32  Data,VOID *ConfigPtr);
+
+/* BIOS DEFAULT RET */
+AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+#define SB_GPIO_REG02   2
+#define SB_GPIO_REG09   9
+#define SB_GPIO_REG10   10
+#define SB_GPIO_REG15   15
+#define SB_GPIO_REG17   17
+#define SB_GPIO_REG21   21
+#define SB_GPIO_REG25   25
+#define SB_GPIO_REG28   28
+#endif //_BIOS_CALLOUT_H_
+
diff --git a/src/mainboard/tyan/s8226/Kconfig b/src/mainboard/tyan/s8226/Kconfig
new file mode 100644
index 0000000..c2fbe9b
--- /dev/null
+++ b/src/mainboard/tyan/s8226/Kconfig
@@ -0,0 +1,127 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+if BOARD_TYAN_S8226
+
+config BOARD_SPECIFIC_OPTIONS
+	def_bool y
+	select ARCH_X86
+	select CPU_AMD_AGESA_FAMILY15
+	select CPU_AMD_SOCKET_C32
+	select NORTHBRIDGE_AMD_AGESA_FAMILY15_ROOT_COMPLEX
+	select NORTHBRIDGE_AMD_AGESA_FAMILY15
+	select NORTHBRIDGE_AMD_CIMX_RD890
+	select SOUTHBRIDGE_AMD_CIMX_SB700
+	select SUPERIO_WINBOND_W83627DHG
+	select SUPERIO_NUVOTON_WPCM450
+	select DRIVERS_I2C_W83795
+	select UDELAY_TSC
+	select BOARD_HAS_FADT
+	select HAVE_BUS_CONFIG
+	select HAVE_OPTION_TABLE
+	select HAVE_PIRQ_TABLE
+	select HAVE_MP_TABLE
+	select HAVE_HARD_RESET
+	select SERIAL_CPU_INIT
+	select HAVE_ACPI_TABLES
+	select BOARD_ROMSIZE_KB_4096
+	select TINY_BOOTBLOCK
+	#select MMCONF_SUPPORT_DEFAULT #TODO enable it to resolve Multicore IO conflict
+
+config MAINBOARD_DIR
+	string
+	default tyan/s8226
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "S8226"
+
+config HW_MEM_HOLE_SIZEK
+	hex
+	default 0x200000
+
+config MAX_CPUS
+	int
+	default 64
+
+config MAX_PHYSICAL_CPUS
+	int
+	default 16
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+	bool
+	default n
+
+config MEM_TRAIN_SEQ
+	int
+	default 2
+
+config IRQ_SLOT_COUNT
+	int
+	default 11
+
+config RAMTOP
+	hex
+	default 0x1000000
+
+config HEAP_SIZE
+	hex
+	default 0xc0000
+
+config STACK_SIZE
+	hex
+	default 0x10000
+
+config ACPI_SSDTX_NUM
+	int
+	default 0
+
+config RAMBASE
+	hex
+	default 0x200000
+
+config SIO_PORT
+	hex
+	default 0x164E
+	help
+		though UARTs are on the NUVOTON BMC, port 0x164E
+		PS2 keyboard and mouse are on SUPERIO_WINBOND_W83627DHG, port 0x2E
+
+config DRIVERS_PS2_KEYBOARD
+	bool
+	default y
+
+config WARNINGS_ARE_ERRORS
+	bool
+	default n
+
+config ONBOARD_VGA_IS_PRIMARY
+	bool
+	default y
+
+config VGA_BIOS
+	bool
+	default n
+
+config VGA_BIOS_ID
+	string
+	depends on VGA_BIOS
+	default "1a03,2000"
+
+endif # BOARD_TYAN_S8226
diff --git a/src/mainboard/tyan/s8226/Makefile.inc b/src/mainboard/tyan/s8226/Makefile.inc
new file mode 100644
index 0000000..d49289b
--- /dev/null
+++ b/src/mainboard/tyan/s8226/Makefile.inc
@@ -0,0 +1,45 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+romstage-$(CONFIG_NORTHBRIDGE_AMD_CIMX_RD890) += rd890_cfg.c
+romstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += sb700_cfg.c
+romstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += reset.c
+romstage-y += buildOpts.c
+romstage-y += agesawrapper.c
+romstage-y += dimmSpd.c
+romstage-y += BiosCallOuts.c
+romstage-y += platform_oem.c
+
+ramstage-$(CONFIG_NORTHBRIDGE_AMD_CIMX_RD890) += rd890_cfg.c
+ramstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += sb700_cfg.c
+ramstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += reset.c
+ramstage-y += buildOpts.c
+ramstage-y += agesawrapper.c
+ramstage-y += dimmSpd.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += platform_oem.c
+
+AGESA_PREFIX ?= $(src)/vendorcode/amd/agesa
+CIMX_PREFIX ?= $(src)/vendorcode/amd/cimx
+AGESA_ROOT ?= $(AGESA_PREFIX)/f15
+NB_CIMX_ROOT ?= $(CIMX_PREFIX)/rd890
+SB_CIMX_ROOT ?= $(CIMX_PREFIX)/sb700
+
+subdirs-y += ../../../../$(AGESA_ROOT)
+
diff --git a/src/mainboard/tyan/s8226/OptionsIds.h b/src/mainboard/tyan/s8226/OptionsIds.h
new file mode 100644
index 0000000..0784e7f
--- /dev/null
+++ b/src/mainboard/tyan/s8226/OptionsIds.h
@@ -0,0 +1,67 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 12067 $   @e \$Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $
+ */
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ *  This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ *    IDSOPT_IDS_ENABLED
+ *    IDSOPT_ERROR_TRAP_ENABLED
+ *    IDSOPT_CONTROL_ENABLED
+ *    IDSOPT_TRACING_ENABLED
+ *    IDSOPT_PERF_ANALYSIS
+ *    IDSOPT_ASSERT_ENABLED
+ *    IDS_DEBUG_PORT
+ *    IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ *
+ **/
+
+#define IDSOPT_IDS_ENABLED     TRUE
+//#define IDSOPT_CONTROL_ENABLED TRUE
+//#define IDSOPT_TRACING_ENABLED TRUE
+//#define IDSOPT_PERF_ANALYSIS   TRUE
+#define IDSOPT_ASSERT_ENABLED  TRUE
+//#define CONFIG_REDIRECT_IDS_HDT_CONSOLE_TO_SERIAL TRUE
+//#undef IDSOPT_DEBUG_ENABLED
+//#define IDSOPT_DEBUG_ENABLED  FALSE
+//#undef IDSOPT_HOST_SIMNOW
+//#define IDSOPT_HOST_SIMNOW    FALSE
+//#undef IDSOPT_HOST_HDT
+//#define IDSOPT_HOST_HDT       FALSE
+//#define IDS_DEBUG_PORT    0x80
+
+#endif
diff --git a/src/mainboard/tyan/s8226/acpi/ide.asl b/src/mainboard/tyan/s8226/acpi/ide.asl
new file mode 100644
index 0000000..c79c18c
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/ide.asl
@@ -0,0 +1,244 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(IDEC) {
+			Name(_ADR, 0x00140001)
+			#include "ide.asl"
+		}
+	}
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){ /* Udma timing table */
+	120, 90, 60, 45, 30, 20, 15, 0	/* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){ /* MWDma timing table */
+	480, 150, 120, 0	/* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){ /* Pio timing table */
+	600, 390, 270, 180, 120, 0	/* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){ /* MWDma timing register table */
+	0x77, 0x21, 0x20, 0xFF	/* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+	0x99, 0x47, 0x34, 0x22, 0x20, 0x99	/* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+	Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+	PPTS, 8,	/* Primary PIO Slave Timing */
+	PPTM, 8,	/* Primary PIO Master Timing */
+	OFFSET(0x04), PMTS, 8,	/* Primary MWDMA Slave Timing */
+	PMTM, 8,	/* Primary MWDMA Master Timing */
+	OFFSET(0x08), PPCR, 8,	/* Primary PIO Control */
+	OFFSET(0x0A), PPMM, 4,	/* Primary PIO master Mode */
+	PPSM, 4,	/* Primary PIO slave Mode */
+	OFFSET(0x14), PDCR, 2,	/* Primary UDMA Control */
+	OFFSET(0x16), PDMM, 4,	/* Primary UltraDMA Mode */
+	PDSM, 4,	/* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1) /* get total time*/
+{
+	Store(And(Arg0, 0x0F), Local0)	/* Recovery Width */
+	Increment(Local0)
+	Store(ShiftRight(Arg0, 4), Local1)	/* Command Width */
+	Increment(Local1)
+	Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+	Name (_ADR, Zero)
+	Method(_GTM, 0)
+	{
+		NAME(OTBF, Buffer(20) { /* out buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(OTBF, 0, PSD0)   /* PIO spd0 */
+		CreateDwordField(OTBF, 4, DSD0)   /* DMA spd0 */
+		CreateDwordField(OTBF, 8, PSD1)   /* PIO spd1 */
+		CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+		/* Just return if the channel is disabled */
+		If(And(PPCR, 0x01)) { /* primary PIO control */
+			Return(OTBF)
+		}
+
+		/* Always tell them independent timing available and IOChannelReady used on both drives */
+		Or(BFFG, 0x1A, BFFG)
+
+		Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming  to PIO spd0 */
+		Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing  to PIO spd1 */
+
+		If(And(PDCR, 0x01)) {	/* It's under UDMA mode */
+			Or(BFFG, 0x01, BFFG)
+			Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+		}
+		Else {
+			Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing,  DmaSpd0 */
+		}
+
+		If(And(PDCR, 0x02)) {	/* It's under UDMA mode */
+			Or(BFFG, 0x04, BFFG)
+			Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+		}
+		Else {
+			Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing,  DmaSpd0 */
+		}
+
+		Return(OTBF) /* out buffer */
+	}				/* End Method(_GTM) */
+
+	Method(_STM, 3, NotSerialized)
+	{
+		NAME(INBF, Buffer(20) { /* in buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(INBF, 0, PSD0)    /* PIO spd0 */
+		CreateDwordField(INBF, 4, DSD0)   /* PIO spd0 */
+		CreateDwordField(INBF, 8, PSD1)   /* PIO spd1 */
+		CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+		Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+		Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
+		Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+		Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
+
+		Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+		Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+		If(And(BFFG, 0x01)) {	/* Drive 0 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDMM,)
+			Or(PDCR, 0x01, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTM)
+			}
+		}
+
+		If(And(BFFG, 0x04)) {	/* Drive 1 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDSM,)
+			Or(PDCR, 0x02, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTS)
+			}
+		}
+		/* Return(INBF) */
+	}		/*End Method(_STM) */
+	Device(MST)
+	{
+		Name(_ADR, 0)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xA0, CMDA)
+			Store(0xA0, CMDB)
+			Store(0xA0, CMDC)
+
+			Or(PPMM, 0x08, POMD)
+
+			If(And(PDCR, 0x01)) {
+				Or(PDMM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTM),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}		/* End Device(MST) */
+
+	Device(SLAV)
+	{
+		Name(_ADR, 1)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xB0, CMDA)
+			Store(0xB0, CMDB)
+			Store(0xB0, CMDC)
+
+			Or(PPSM, 0x08, POMD)
+
+			If(And(PDCR, 0x02)) {
+				Or(PDSM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTS),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}			/* End Device(SLAV) */
+}
diff --git a/src/mainboard/tyan/s8226/acpi/routing.asl b/src/mainboard/tyan/s8226/acpi/routing.asl
new file mode 100644
index 0000000..8bc06f6
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/routing.asl
@@ -0,0 +1,222 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "routing.asl"
+	}
+*/
+
+/* Routing is in System Bus scope */
+Scope(\_SB) {
+	Name(PR0, Package(){
+		/* NB devices */
+		/* Bus 0, Dev 0 - SR5650 HT */
+		Package() { 0xFFFF, Zero, INTA, Zero },
+
+		/* Bus 0, Dev 1 - CLKCONFIG */
+
+		/* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot */
+		Package() {0x0002FFFF, 0, INTE, 0 },
+
+		/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+
+		/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+		Package() {0x0004FFFF, 0, INTE, 0 },
+
+		/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+
+		/* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
+
+		/* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
+
+		/* Bus 0, Dev 8 - Southbridge port (normally hidden) */
+
+		/* Bus 0, Dev 9 - PCIe Bridge */
+
+		/* Bus 0, Dev a - PCIe Bridge */
+
+		/* Bus 0, Dev b - PCIe Bridge */
+		Package() {0x000BFFFF, 0, INTG, 0 },
+
+		/* Bus 0, Dev c - PCIe Bridge */
+		Package() {0x000CFFFF, 0, INTG, 0 },
+
+		/* Bus 0, Dev d - PCIe Bridge for Intel 82576 Giga NIC*/
+		Package() {0x000DFFFF, 0, INTG, 0 },
+
+		/* SB devices */
+		/* Bus 0, Dev 17 - SATA controller */
+		Package() {0x0011FFFF, 0, INTG, 0 },
+
+		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+		 * EHCI, dev 18, 19 func 2 */
+		Package() {0x0012FFFF, 0, INTA, 0 },
+		Package() {0x0012FFFF, 1, INTB, 0 },
+		Package() {0x0012FFFF, 2, INTC, 0 },
+		Package() {0x0012FFFF, 3, INTD, 0 },
+
+		Package() {0x0013FFFF, 0, INTC, 0 },
+		Package() {0x0013FFFF, 1, INTD, 0 },
+		Package() {0x0013FFFF, 2, INTA, 0 },
+		Package() {0x0013FFFF, 2, INTB, 0 },
+
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
+		Package(){0x0014FFFF, 0, INTA, 0 },
+		Package(){0x0014FFFF, 1, INTB, 0 },
+		Package(){0x0014FFFF, 2, INTC, 0 },
+		Package(){0x0014FFFF, 3, INTD, 0 },
+	})
+
+	Name(APR0, Package(){
+		/* NB devices in APIC mode */
+		/* Bus 0, Dev 0 - SR5650 HT */
+		Package() { 0xFFFF, Zero, Zero, 16 },
+
+		/* Bus 0, Dev 1 - CLKCONFIG */
+
+		/* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot (GFX0) */
+		Package() {0x0002FFFF, 0, 0, 0x34 },
+
+		/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+
+		/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+		Package() {0x0004FFFF, 0, 0, 0x34 },
+
+		/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+
+		/* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
+
+		/* Bus 0, Dev 7 - PCIe Bridge */
+
+		/* Bus 0, Dev 8 - Southbridge port (normally hidden) */
+
+		/* Bus 0, Dev 9 - PCIe Bridge */
+
+		/* Bus 0, Dev A - PCIe Bridge */
+
+		/* Bus 0, Dev B - PCIe Bridge */
+		Package() {0x000BFFFF, 0, 0, 0x36 },
+
+		/* Bus 0, Dev C - PCIe Bridge */
+		Package() {0x000CFFFF, 0, 0, 0x36 },
+
+		/* Bus 0, Dev D - PCIe Bridge For Intel 82576 Giga NIC*/
+		Package() {0x000DFFFF, 0, 0, 0x36 },
+
+		/* SB devices in APIC mode */
+		/* Bus 0, Dev 17 - SATA controller */
+		Package() {0x0011FFFF, 0, 0, 0x16 },
+
+		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+		 * EHCI, dev 18, 19 func 2 */
+		Package( ){0x0012FFFF, 0, 0, 16 },
+		Package() {0x0012FFFF, 1, 0, 17 },
+		Package() {0x0012FFFF, 2, 0, 18 },
+		Package() {0x0012FFFF, 3, 0, 19 },
+
+		Package() {0x0013FFFF, 0, 0, 18 },
+		Package() {0x0013FFFF, 1, 0, 19 },
+		Package() {0x0013FFFF, 2, 0, 16 },
+		Package() {0x0013FFFF, 3, 0, 17 },
+
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+		Package() {0x0014FFFF, 0, 0, 16 },
+		Package() {0x0014FFFF, 1, 0, 17 },
+		Package() {0x0014FFFF, 2, 0, 18 },
+		Package() {0x0014FFFF, 3, 0, 19 },
+	})
+
+	Name(PS2, Package(){
+		/* The external GFX - Hooked to PCIe slot 4 */
+		Package() {0x0000FFFF, 0, INTC, 0 },
+		Package() {0x0000FFFF, 1, INTD, 0 },
+		Package() {0x0000FFFF, 2, INTA, 0 },
+		Package() {0x0000FFFF, 3, INTB, 0 },
+	})
+	Name(APS2, Package(){
+		/* The external GFX - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, 0, 0x18 },
+		Package(){0x0000FFFF, 1, 0, 0x19 },
+		Package(){0x0000FFFF, 2, 0, 0x1A },
+		Package(){0x0000FFFF, 3, 0, 0x1B },
+	})
+
+	Name(PS4, Package(){
+		/* PCIe slot - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, INTA, 0 },
+		Package(){0x0000FFFF, 1, INTB, 0 },
+		Package(){0x0000FFFF, 2, INTC, 0 },
+		Package(){0x0000FFFF, 3, INTD, 0 },
+	})
+	Name(APS4, Package(){
+		/* PCIe slot - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, 0, 0x2C },
+		Package(){0x0000FFFF, 1, 0, 0x2D },
+		Package(){0x0000FFFF, 2, 0, 0x2E },
+		Package(){0x0000FFFF, 3, 0, 0x2F },
+	})
+
+	Name(PSb, Package(){
+		/* PCIe slot - Hooked to PCIe slot 11 */
+		Package(){0x0000FFFF, 0, INTD, 0 },
+		Package(){0x0000FFFF, 1, INTA, 0 },
+		Package(){0x0000FFFF, 2, INTB, 0 },
+		Package(){0x0000FFFF, 3, INTC, 0 },
+	})
+	Name(APSb, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 0x20 },
+		Package(){0x0000FFFF, 1, 0, 0x21 },
+		Package(){0x0000FFFF, 2, 0, 0x22 },
+		Package(){0x0000FFFF, 3, 0, 0x23 },
+	})
+
+	Name(PSc, Package(){
+		/* PCIe slot - Hooked to PCIe slot 12 */
+		Package(){0x0000FFFF, 0, INTA, 0 },
+		Package(){0x0000FFFF, 1, INTB, 0 },
+		Package(){0x0000FFFF, 2, INTC, 0 },
+		Package(){0x0000FFFF, 3, INTD, 0 },
+	})
+	Name(APSc, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 0x24 },
+		Package(){0x0000FFFF, 1, 0, 0x25 },
+		Package(){0x0000FFFF, 2, 0, 0x26 },
+		Package(){0x0000FFFF, 3, 0, 0x27 },
+	})
+
+	Name(PSd, Package(){
+		/* PCIe slot - Hooked to PCIe slot 13 */
+		Package(){0x0000FFFF, 0, INTB, 0 },
+		Package(){0x0000FFFF, 1, INTC, 0 },
+		Package(){0x0000FFFF, 2, INTD, 0 },
+		Package(){0x0000FFFF, 3, INTA, 0 },
+	})
+	Name(APSd, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 0x28 },
+		Package(){0x0000FFFF, 1, 0, 0x29 },
+		Package(){0x0000FFFF, 2, 0, 0x2A },
+		Package(){0x0000FFFF, 3, 0, 0x2B },
+	})
+}
diff --git a/src/mainboard/tyan/s8226/acpi/sata.asl b/src/mainboard/tyan/s8226/acpi/sata.asl
new file mode 100644
index 0000000..bd4acf0
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/sata.asl
@@ -0,0 +1,149 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(SATA) {
+			Name(_ADR, 0x00110000)
+			#include "sata.asl"
+		}
+	}
+}
+*/
+
+Name(STTM, Buffer(20) {
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+	\_GPE._L1F()
+}
+
+Device(PMRY)
+{
+	Name(_ADR, 0)
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(PMST) {
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P0IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return  (0x00) /* sata is missing */
+			}
+		}
+	}/* end of PMST */
+
+	Device(PSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P1IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	}	/* end of PSLA */
+}   /* end of PMRY */
+
+
+Device(SEDY)
+{
+	Name(_ADR, 1)		/* IDE Scondary Channel */
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(SMST)
+	{
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P2IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SMST */
+
+	Device(SSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P3IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SSLA */
+}   /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+	Method(_L1F,0x0,NotSerialized) {
+		if (\_SB.P0PR) {
+			if (LGreater(\_SB.P0IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P0PR)
+		}
+
+		if (\_SB.P1PR) {
+			if (LGreater(\_SB.P1IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P1PR)
+		}
+
+		if (\_SB.P2PR) {
+			if (LGreater(\_SB.P2IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P2PR)
+		}
+
+		if (\_SB.P3PR) {
+			if (LGreater(\_SB.P3IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P3PR)
+		}
+	}
+}
diff --git a/src/mainboard/tyan/s8226/acpi/usb.asl b/src/mainboard/tyan/s8226/acpi/usb.asl
new file mode 100644
index 0000000..81ea9a2
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/usb.asl
@@ -0,0 +1,161 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "usb.asl"
+	}
+*/
+Method(UCOC, 0) {
+	Sleep(20)
+	Store(0x13,CMTI)
+	Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+	Scope (\_GPE) {
+		Method (_L13) {
+			UCOC()
+			if(LEqual(GPB0,PLC0)) {
+				Not(PLC0,PLC0)
+				Store(PLC0, \_SB.PT0D)
+			}
+		}
+	}
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+	Scope (\_GPE) {
+		Method (_L14) {
+			UCOC()
+			if (LEqual(GPB1,PLC1)) {
+				Not(PLC1,PLC1)
+				Store(PLC1, \_SB.PT1D)
+			}
+		}
+	}
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+	Scope (\_GPE) {
+		Method (_L15) {
+			UCOC()
+			if (LEqual(GPB2,PLC2)) {
+				Not(PLC2,PLC2)
+				Store(PLC2, \_SB.PT2D)
+			}
+		}
+	}
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+	Scope (\_GPE) {
+		Method (_L16) {
+			UCOC()
+			if (LEqual(GPB3,PLC3)) {
+				Not(PLC3,PLC3)
+				Store(PLC3, \_SB.PT3D)
+			}
+		}
+	}
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+	Scope (\_GPE) {
+		Method (_L19) {
+			UCOC()
+			if (LEqual(GPB4,PLC4)) {
+				Not(PLC4,PLC4)
+				Store(PLC4, \_SB.PT4D)
+			}
+		}
+	}
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+	Scope (\_GPE) {
+		Method (_L1A) {
+			UCOC()
+			if (LEqual(GPB5,PLC5)) {
+				Not(PLC5,PLC5)
+				Store(PLC5, \_SB.PT5D)
+			}
+		}
+	}
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1C) { */
+		Method (_L06) {
+			UCOC()
+			if (LEqual(GPB6,PLC6)) {
+				Not(PLC6,PLC6)
+				Store(PLC6, \_SB.PT6D)
+			}
+		}
+	}
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1D) { */
+		Method (_L07) {
+			UCOC()
+			if (LEqual(GPB7,PLC7)) {
+				Not(PLC7,PLC7)
+				Store(PLC7, \_SB.PT7D)
+			}
+		}
+	}
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+	Scope (\_GPE) {
+		Method (_L17) {
+			if (LEqual(G8IS,PLC8)) {
+				Not(PLC8,PLC8)
+				Store(PLC8, \_SB.PT8D)
+			}
+		}
+	}
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+	Scope (\_GPE) {
+		Method (_L0E) {
+			if (LEqual(G9IS,0)) {
+			Store(1,\_SB.PT9D)
+			}
+		}
+	}
+}
diff --git a/src/mainboard/tyan/s8226/acpi_tables.c b/src/mainboard/tyan/s8226/acpi_tables.c
new file mode 100644
index 0000000..3e8f014
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi_tables.c
@@ -0,0 +1,319 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <arch/io.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+#include "agesawrapper.h"
+
+#define DUMP_ACPI_TABLES 0
+
+#if DUMP_ACPI_TABLES == 1
+static void dump_mem(u32 start, u32 end)
+{
+
+	u32 i;
+	print_debug("dump_mem:");
+	for (i = start; i < end; i++) {
+		if ((i & 0xf) == 0) {
+			printk(BIOS_DEBUG, "\n%08x:", i);
+		}
+		printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
+	}
+	print_debug("\n");
+}
+#endif
+
+extern const unsigned char AmlCode[];
+
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+	/* Just a dummy */
+	return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+	device_t dev;
+	u32 dword;
+	u32 gsi_base = 0;
+	u32 apicid_sp5100;
+	u32 apicid_sr5650;
+
+	/*
+	 * AGESA v5 Apply apic enumeration rules
+	 * For systems with >= 16 APICs, put the IO-APICs at 0..n and
+	 * put the local-APICs at m..z
+	 * For systems with < 16 APICs, put the Local-APICs at 0..n and
+	 * put the IO-APICs at (n + 1)..z
+	 */
+#if CONFIG_MAX_CPUS >= 16
+	apicid_sp5100 = 0x0;
+#else
+	apicid_sp5100 = CONFIG_MAX_CPUS + 1
+#endif
+		apicid_sr5650 = apicid_sp5100 + 1;
+
+	/* create all subtables for processors */
+	current = acpi_create_madt_lapics(current);
+
+	/* Write sp5100 IOAPIC, only one */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+			apicid_sp5100,
+			IO_APIC_ADDR,
+			0
+			);
+
+	/* IOAPIC on rs5690 */
+	gsi_base += IO_APIC_INTERRUPTS;  /* SP5100 has 24 IOAPIC entries. */
+	dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+	if (dev) {
+		pci_write_config32(dev, 0xF8, 0x1);
+		dword = pci_read_config32(dev, 0xFC) & 0xfffffff0;
+		current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+				apicid_sr5650,
+				dword,
+				gsi_base
+				);
+	}
+
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current,
+			0, //BUS
+			0, //SOURCE
+			2, //gsirq
+			0  //flags
+			);
+
+	/* 0: mean bus 0--->ISA */
+	/* 0: PIC 0 */
+	/* 2: APIC 2 */
+	/* 5 mean: 0101 --> Edige-triggered, Active high */
+
+	/* create all subtables for processors */
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0, 5, 1);
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 1, 5, 1);
+	/* 1: LINT1 connect to NMI */
+
+	return current;
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+	// Not implemented
+	return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+	/* No NUMA, no SRAT */
+	return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id)
+{
+	int lens;
+	msr_t msr;
+	char pscope[] = "\\_SB.PCI0";
+
+	lens = acpigen_write_scope(pscope);
+	msr = rdmsr(TOP_MEM);
+	lens += acpigen_write_name_dword("TOM1", msr.lo);
+	msr = rdmsr(TOP_MEM2);
+	/*
+	 * Since XP only implements parts of ACPI 2.0, we can't use a qword
+	 * here.
+	 * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt
+	 * slide 22ff.
+	 * Shift value right by 20 bit to make it fit into 32bit,
+	 * giving us 1MB granularity and a limit of almost 4Exabyte of memory.
+	 */
+	lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20);
+	acpigen_patch_len(lens - 1);
+	return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+	unsigned long current;
+	acpi_rsdp_t *rsdp;
+	acpi_rsdt_t *rsdt;
+	//acpi_hpet_t *hpet;
+	acpi_madt_t *madt;
+	acpi_srat_t *srat;
+	acpi_slit_t *slit;
+	acpi_fadt_t *fadt;
+	acpi_facs_t *facs;
+	acpi_header_t *dsdt;
+	acpi_header_t *ssdt;
+	acpi_header_t *ssdt2;
+	acpi_header_t *alib;
+
+	get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
+
+	/* Align ACPI tables to 16 bytes */
+	start = (start + 0x0f) & -0x10;
+	current = start;
+
+	printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
+
+	/* We need at least an RSDP and an RSDT Table */
+	rsdp = (acpi_rsdp_t *) current;
+	current += sizeof(acpi_rsdp_t);
+	rsdt = (acpi_rsdt_t *) current;
+	current += sizeof(acpi_rsdt_t);
+
+	/* clear all table memory */
+	memset((void *)start, 0, current - start);
+
+	acpi_write_rsdp(rsdp, rsdt, NULL);
+	acpi_write_rsdt(rsdt);
+
+	/* FACS */
+	printk(BIOS_DEBUG, "ACPI:    * FACS\n");
+	facs = (acpi_facs_t *) current;
+	current += sizeof(acpi_facs_t);
+	acpi_create_facs(facs);
+
+	/* DSDT */
+	printk(BIOS_DEBUG, "ACPI:    * DSDT\n");
+	dsdt = (acpi_header_t *)current;
+	memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
+	current += dsdt->length;
+	memcpy(dsdt, &AmlCode, dsdt->length);
+	printk(BIOS_DEBUG, "ACPI:    * DSDT @ %p Length %x\n", dsdt, dsdt->length);
+	/* FADT */
+	printk(BIOS_DEBUG, "ACPI:    * FADT\n");
+	fadt = (acpi_fadt_t *) current;
+	current += sizeof(acpi_fadt_t);
+
+	acpi_create_fadt(fadt, facs, dsdt);
+	acpi_add_table(rsdp, fadt);
+
+	/*
+	 * We explicitly add these tables later on:
+	 */
+#ifdef UNUSED_CODE // Don't need HPET table. we have one in dsdt
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * HPET at %lx\n", current);
+	hpet = (acpi_hpet_t *) current;
+	current += sizeof(acpi_hpet_t);
+	acpi_create_hpet(hpet);
+	acpi_add_table(rsdp, hpet);
+#endif
+
+	/* If we want to use HPET Timers Linux wants an MADT */
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * MADT at %lx\n",current);
+	madt = (acpi_madt_t *) current;
+	acpi_create_madt(madt);
+	current += madt->header.length;
+	acpi_add_table(rsdp, madt);
+
+	/* SRAT */
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * SRAT at %lx\n", current);
+	srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT);
+	if (srat != NULL) {
+		memcpy((void *)current, srat, srat->header.length);
+		srat = (acpi_srat_t *) current;
+		//acpi_create_srat(srat);
+		current += srat->header.length;
+		acpi_add_table(rsdp, srat);
+	}
+
+	/* SLIT */
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:   * SLIT at %lx\n", current);
+	slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT);
+	if (slit != NULL) {
+		memcpy((void *)current, slit, slit->header.length);
+		slit = (acpi_slit_t *) current;
+		//acpi_create_slit(slit);
+		current += slit->header.length;
+		acpi_add_table(rsdp, slit);
+	}
+
+	/* SSDT */
+	current	 = (current + 0x0f) & -0x10;
+	printk(BIOS_DEBUG, "ACPI:  * AGESA ALIB SSDT at %lx\n", current);
+	alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB);
+	if (alib != NULL) {
+		memcpy((void *)current, alib, alib->length);
+		ssdt = (acpi_header_t *) current;
+		current += alib->length;
+		acpi_add_table(rsdp,alib);
+	} else {
+		printk(BIOS_DEBUG, "	AGESA ALIB SSDT table NULL. Skipping.\n");
+	}
+
+	/* The DSDT needs additional work for the AGESA SSDT Pstate table */
+	current	 = ( current + 0x0f) & -0x10;
+	printk(BIOS_DEBUG, "ACPI:  * AGESA SSDT Pstate at %lx\n", current);
+	ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE);
+	if (ssdt != NULL) {
+		memcpy((void *)current, ssdt, ssdt->length);
+		ssdt = (acpi_header_t *) current;
+		current += ssdt->length;
+		acpi_add_table(rsdp,ssdt);
+	} else {
+		printk(BIOS_DEBUG, "  AGESA SSDT table NULL. Skipping.\n");
+	}
+
+	current	 = ( current + 0x0f) & -0x10;
+	printk(BIOS_DEBUG, "ACPI:  * coreboot TOM SSDT2 at %lx\n", current);
+	ssdt2 = (acpi_header_t *) current;
+	acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR);
+	current += ssdt2->length;
+	acpi_add_table(rsdp,ssdt2);
+
+#if DUMP_ACPI_TABLES == 1
+	printk(BIOS_DEBUG, "rsdp\n");
+	dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+
+	printk(BIOS_DEBUG, "rsdt\n");
+	dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+
+	printk(BIOS_DEBUG, "madt\n");
+	dump_mem(madt, ((void *)madt) + madt->header.length);
+
+	printk(BIOS_DEBUG, "srat\n");
+	dump_mem(srat, ((void *)srat) + srat->header.length);
+
+	printk(BIOS_DEBUG, "slit\n");
+	dump_mem(slit, ((void *)slit) + slit->header.length);
+
+	printk(BIOS_DEBUG, "ssdt\n");
+	dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+
+	printk(BIOS_DEBUG, "fadt\n");
+	dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+#endif
+
+	printk(BIOS_INFO, "ACPI: done.\n");
+	return current;
+}
diff --git a/src/mainboard/tyan/s8226/agesawrapper.c b/src/mainboard/tyan/s8226/agesawrapper.c
new file mode 100644
index 0000000..1485354
--- /dev/null
+++ b/src/mainboard/tyan/s8226/agesawrapper.c
@@ -0,0 +1,1204 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include "agesawrapper.h"
+#include "BiosCallOuts.h"
+#include "cpuRegisters.h"
+#include "cpuCacheInit.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "Dispatcher.h"
+#include "cpuCacheInit.h"
+#include "amdlib.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include <cpuFamilyTranslation.h> /* CPU_SPECIFIC_SERVICES */
+
+#define FILECODE UNASSIGNED_FILE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* ACPI table pointers returned by AmdInitLate */
+VOID *DmiTable    = NULL;
+VOID *AcpiPstate  = NULL;
+VOID *AcpiSrat    = NULL;
+VOID *AcpiSlit    = NULL;
+
+VOID *AcpiWheaMce = NULL;
+VOID *AcpiWheaCmc = NULL;
+VOID *AcpiAlib    = NULL;
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+extern VOID OemCustomizeInitEarly(IN  OUT AMD_EARLY_PARAMS *InitEarly);
+
+static UINT32 agesawrapper_amdinitcpuio(VOID)
+{
+	AGESA_STATUS		Status;
+	UINT32			PciData;
+	PCI_ADDR		PciAddress;
+	AMD_CONFIG_PARAMS	StdHeader;
+	UINT32			nodes;
+	UINT32			node;
+	UINT32			sblink;
+	UINT32			i;
+	UINT32			TOM;
+
+	/* get the number of coherent nodes in the system */
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x60);
+	LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	nodes = ((PciData >> 4) & 7) + 1; //NodeCnt[2:0]
+
+	/* Find out the Link ID of Node0 that connects to the
+	 * Southbridge (system IO hub). e.g. family10 MCM Processor,
+	 * sbLink is Processor0 Link2, internal Node0 Link3
+	 */
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x64);
+	LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	sblink = (PciData >> 8) & 3; //assume ganged
+
+	/* Enable MMIO on AMD CPU Address Map Controller for all nodes */
+	for (node = 0; node < nodes; node++) {
+		/* clear all MMIO Mapped Base/Limit Registers */
+		for (i = 0; i < 8; i++) {
+			PciData = 0x00000000;
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x80 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x84 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		}
+
+		/* clear all IO Space Base/Limit Registers */
+		for (i = 0; i < 4; i++) {
+			PciData = 0x00000000;
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC4 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC0 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		}
+
+		/* Set VGA Ram MMIO 0000A0000-0000BFFFF to Node0 sbLink */
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x84);
+		PciData = 0x00000B00;
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x80);
+		PciData = 0x00000A03;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+		/* Set TOM1-FFFFFFFF to Node0 sbLink. */
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x8C);
+		PciData = 0x00FFFF00;
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		TOM = (UINT32)MsrRead(TOP_MEM);
+		PciData = (TOM >> 8) | 0x03;
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x88);
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+		/* Set MMCONF space to Node0 sbLink with NP set.
+		 * default E0000000-EFFFFFFF
+		 * Just have all mmio set to non-posted,
+		 * coreboot not implemente the range by range setting yet.
+		 */
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xBC);
+		PciData = CONFIG_MMCONF_BASE_ADDRESS + (CONFIG_MMCONF_BUS_NUMBER * 0x100000);//1MB each bus
+		PciData = (PciData >> 8) & 0xFFFFFF00;
+		PciData |= 0x80; //NP
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xB8);
+		PciData = (PCIE_BASE_ADDRESS >> 8) | 0x03;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+
+		/* Set PCIO: 0x0 - 0xFFF000 to Node0 sbLink  and enabled VGA IO*/
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC4);
+		PciData = 0x00FFF000;
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC0);
+		PciData = 0x00000033;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	}
+
+	Status = AGESA_SUCCESS;
+	return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdinitmmio (
+	VOID
+	)
+{
+	AGESA_STATUS                  Status;
+	UINT64                        MsrReg;
+	UINT32                        PciData;
+	PCI_ADDR                      PciAddress;
+	AMD_CONFIG_PARAMS             StdHeader;
+
+	/*
+	  Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
+	  Address MSR register.
+	*/
+	MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
+	LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader);
+
+	/*
+	  Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
+	*/
+	LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader);
+	MsrReg = MsrReg | 0x0000400000000000;
+	LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
+
+	/* For serial port */
+	PciData = 0xFF03FFD5;
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44);
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* Set ROM cache onto WP to decrease post time */
+	MsrReg = (0x0100000000ull - CONFIG_ROM_SIZE) | 5ull;
+	LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader);
+	MsrReg = (0x1000000000000ull - CONFIG_ROM_SIZE) | 0x800ull;
+	LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader);
+
+	Status = AGESA_SUCCESS;
+	return (UINT32)Status;
+}
+
+UINT32 agesawrapper_amdinitreset(VOID)
+{
+	AGESA_STATUS status = AGESA_SUCCESS;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_RESET_PARAMS AmdResetParams;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	LibAmdMemFill(&AmdResetParams,
+			0,
+			sizeof(AMD_RESET_PARAMS),
+			&(AmdResetParams.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
+	AmdParamStruct.AllocationMethod = ByHost;
+	AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS);
+	AmdParamStruct.NewStructPtr = &AmdResetParams;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = NULL;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	AmdResetParams.HtConfig.Depth = 0;
+
+	//MARG34PI disabled AGESA_ENTRY_INIT_RESET by default
+	//but we need to call AmdCreateStruct to call HeapManagerInit, or the event log not work
+#if (defined AGESA_ENTRY_INIT_RESET) && (AGESA_ENTRY_INIT_RESET == TRUE)
+	status = AmdInitReset((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr);
+#endif
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct(&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitearly(VOID)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_EARLY_PARAMS     *AmdEarlyParamsPtr;
+	UINT32 TscRateInMhz;
+	CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+
+	AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr;
+	OemCustomizeInitEarly(AmdEarlyParamsPtr);
+
+	status = AmdInitEarly(AmdEarlyParamsPtr);
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+
+	GetCpuServicesOfCurrentCore((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &AmdParamStruct.StdHeader);
+	FamilySpecificServices->GetTscRate(FamilySpecificServices, &TscRateInMhz, &AmdParamStruct.StdHeader);
+	printk(BIOS_DEBUG, "BSP Frequency: %luMHz\n", TscRateInMhz);
+
+	AmdReleaseStruct(&AmdParamStruct);
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitpost(VOID)
+{
+	AGESA_STATUS status;
+	UINT16 i;
+	UINT32 *HeadPtr;
+	AMD_INTERFACE_PARAMS  AmdParamStruct;
+	AMD_POST_PARAMS *PostParams;
+	BIOS_HEAP_MANAGER    *BiosManagerPtr;
+	UINT32 TscRateInMhz;
+	CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr;
+	status = AmdInitPost(PostParams);
+	if (status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus);
+	}
+	AmdReleaseStruct(&AmdParamStruct);
+
+	/* Initialize heap space */
+	BiosManagerPtr = (BIOS_HEAP_MANAGER *)BIOS_HEAP_START_ADDRESS;
+
+	HeadPtr = (UINT32 *) ((UINT8 *) BiosManagerPtr + sizeof(BIOS_HEAP_MANAGER));
+	for (i = 0; i < ((BIOS_HEAP_SIZE/4) - (sizeof(BIOS_HEAP_MANAGER)/4)); i++) {
+		*HeadPtr = 0x00000000;
+		HeadPtr++;
+	}
+	BiosManagerPtr->StartOfAllocatedNodes = 0;
+	BiosManagerPtr->StartOfFreedNodes = 0;
+
+	GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &AmdParamStruct.StdHeader);
+	FamilySpecificServices->GetTscRate (FamilySpecificServices, &TscRateInMhz, &AmdParamStruct.StdHeader);
+	printk(BIOS_DEBUG, "BSP Frequency: %luMHz\n", TscRateInMhz);
+
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitenv(VOID)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_ENV_PARAMS *EnvParams;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	EnvParams = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr;
+	status = AmdInitEnv(EnvParams);
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(EnvParams->StdHeader.HeapStatus);
+
+	AmdReleaseStruct(&AmdParamStruct);
+	return (UINT32)status;
+}
+
+VOID * agesawrapper_getlateinitptr(int pick)
+{
+	switch (pick) {
+		case PICK_DMI:
+			return DmiTable;
+
+		case PICK_PSTATE:
+			return AcpiPstate;
+
+		case PICK_SRAT:
+			return AcpiSrat;
+
+		case PICK_SLIT:
+			return AcpiSlit;
+		case PICK_WHEA_MCE:
+			return AcpiWheaMce;
+		case PICK_WHEA_CMC:
+			return AcpiWheaCmc;
+		case PICK_ALIB:
+			return AcpiAlib;
+		default:
+			return NULL;
+	}
+
+	return NULL;
+}
+
+UINT32 agesawrapper_amdinitmid(VOID)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+
+	/* Enable MMIO on AMD CPU Address Map Controller */
+	agesawrapper_amdinitcpuio();
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	status = AmdInitMid((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr);
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct(&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitlate(VOID)
+{
+	AGESA_STATUS		Status;
+	AMD_INTERFACE_PARAMS	AmdParamStruct;
+	AMD_LATE_PARAMS		*AmdLateParamsPtr;
+
+	LibAmdMemFill(&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	AmdCreateStruct (&AmdParamStruct);
+	AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr;
+
+	printk(BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr);
+
+	Status = AmdInitLate(AmdLateParamsPtr);
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdLateParamsPtr->StdHeader.HeapStatus);
+		ASSERT(Status == AGESA_SUCCESS);
+	}
+	DmiTable    = AmdLateParamsPtr->DmiTable;
+	AcpiPstate  = AmdLateParamsPtr->AcpiPState;
+	AcpiSrat    = AmdLateParamsPtr->AcpiSrat;
+	AcpiSlit    = AmdLateParamsPtr->AcpiSlit;
+	AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce;
+	AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc;
+	AcpiAlib    = AmdLateParamsPtr->AcpiAlib;
+
+	printk(BIOS_DEBUG, "In %s, AGESA generated ACPI tables:\n"
+		"   DmiTable:%p\n   AcpiPstate: %p\n   AcpiSrat:%p\n   AcpiSlit:%p\n"
+		"   Mce:%p\n   Cmc:%p\n   Alib:%p\n",
+		 __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit,
+		 AcpiWheaMce, AcpiWheaCmc, AcpiAlib);
+
+	/* Don't release the structure until coreboot has copied the ACPI tables.
+	 * AmdReleaseStruct (&AmdLateParams);
+	 */
+
+	return (UINT32)Status;
+}
+
+/**
+ * @param[in] UINTN ApicIdOfCore,
+ * @param[in] AP_EXE_PARAMS *LaunchApParams
+ */
+UINT32 agesawrapper_amdlaterunaptask(UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS Status;
+	AMD_LATE_PARAMS AmdLateParams;
+
+	LibAmdMemFill(&AmdLateParams,
+			0,
+			sizeof(AMD_LATE_PARAMS),
+			&(AmdLateParams.StdHeader));
+
+	AmdLateParams.StdHeader.AltImageBasePtr = 0;
+	AmdLateParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdLateParams.StdHeader.Func = 0;
+	AmdLateParams.StdHeader.ImageBasePtr = 0;
+	AmdLateParams.StdHeader.HeapStatus = HEAP_TEMP_MEM;
+
+	printk(BIOS_DEBUG, "AmdLateRunApTask on Core: %x\n", (uint32_t)Data);
+	Status = AmdLateRunApTask((AP_EXE_PARAMS *)ConfigPtr);
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdLateParams.StdHeader.HeapStatus);
+		ASSERT(Status <= AGESA_UNSUPPORTED);
+	}
+
+	return (UINT32)Status;
+}
+
+/**
+ *
+ */
+static void agesa_bound_check(EVENT_PARAMS *event)
+{
+	switch (event->EventInfo) {
+		case CPU_ERROR_HEAP_IS_FULL:
+			printk(BIOS_DEBUG, "Heap allocation for specified buffer handle failed as heap is full\n");
+			break;
+
+		case CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED:
+			printk(BIOS_DEBUG, "Allocation incomplete as buffer has previously been allocated\n");
+			break;
+
+		case CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT:
+			printk(BIOS_DEBUG, "Unable to locate buffer handle or deallocate heap as buffer handle cannot be located\n");
+			break;
+
+		case CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT:
+			printk(BIOS_DEBUG, "Unable to locate pointer to the heap buffer\n");
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_alert(EVENT_PARAMS *event)
+{
+	switch (event->EventInfo) {
+		case MEM_ALERT_USER_TMG_MODE_OVERRULED:
+			printk(BIOS_DEBUG, "Socket %lx Dct %lx Channel %lx "
+					"TIMING_MODE_SPECIFIC is requested but can not be applied to current configurations.\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case MEM_ALERT_ORG_MISMATCH_DIMM:
+			printk(BIOS_DEBUG, "Socket %lx Dct %lx Channel %lx "
+					"DIMM organization miss-match\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case MEM_ALERT_BK_INT_DIS:
+			printk(BIOS_DEBUG, "Socket %lx Dct %lx Channel %lx "
+					"Bank interleaving disable for internal issue\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case CPU_EVENT_BIST_ERROR:
+			printk(BIOS_DEBUG, "BIST error: %lx reported on Socket %lx Core %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_HW_SYNCFLOOD:
+			printk(BIOS_DEBUG, "HT_EVENT_DATA_HW_SYNCFLOOD error on Socket %lx Link %lx\n",
+					event->DataParam1,
+					event->DataParam2);
+			break;
+
+		case HT_EVENT_HW_HTCRC:
+			printk(BIOS_DEBUG, "HT_EVENT_HW_HTCRC error on Socket %lx Link %lx Lanemask:%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_warning(EVENT_PARAMS *event)
+{
+/*
+	if (event->EventInfo == CPU_EVENT_STACK_REENTRY) {
+		printk(BIOS_DEBUG,
+				"The stack has already been enabled and this is a
+				redundant invocation of AMD_ENABLE_STACK. There is no event logged and
+				no data values. The event sub-class is returned along with the status code\n");
+		return;
+	}
+*/
+
+	switch (event->EventInfo >> 24) {
+		case 0x04:
+			printk(BIOS_DEBUG, "Memory: Socket %lx Dct %lx Channel%lx ",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case 0x08:
+			printk(BIOS_DEBUG, "Processor: ");
+			break;
+
+		case 0x10:
+			printk(BIOS_DEBUG, "Hyper Transport: ");
+			break;
+
+		default:
+			break;
+	}
+
+	switch (event->EventInfo) {
+		case MEM_WARNING_UNSUPPORTED_QRDIMM:
+			printk(BIOS_DEBUG, "QR DIMMs detected but not supported\n");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_UDIMM:
+			printk(BIOS_DEBUG, "Unbuffered DIMMs detected but not supported\n");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_SODIMM:
+			printk(BIOS_DEBUG, "SO-DIMMs detected but not supported");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_X4DIMM:
+			printk(BIOS_DEBUG, "x4 DIMMs detected but not supported");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_RDIMM:
+			printk(BIOS_DEBUG, "Registered DIMMs detected but not supported");
+			break;
+
+/*
+		case MEM_WARNING_UNSUPPORTED_LRDIMM:
+			printk(BIOS_DEBUG, "Load Reduced DIMMs detected but not supported");
+			break;
+*/
+
+		case MEM_WARNING_NO_SPDTRC_FOUND:
+			printk(BIOS_DEBUG, "NO_SPDTRC_FOUND");
+			break;
+
+		case MEM_WARNING_EMP_NOT_SUPPORTED:
+			printk(BIOS_DEBUG, "Processor is not capable for EMP");//
+			break;
+
+		case MEM_WARNING_EMP_CONFLICT:
+			printk(BIOS_DEBUG, "EMP cannot be enabled if channel interleaving bank interleaving, or bank swizzle is enabled\n");//
+			break;
+
+		case MEM_WARNING_EMP_NOT_ENABLED:
+			printk(BIOS_DEBUG, "Memory size is not power of two\n");//
+			break;
+
+		case MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED:
+			printk(BIOS_DEBUG, "MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED\n");
+			break;
+
+		case MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED\n");
+			break;
+
+		case MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED\n");
+			break;
+
+		case MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED\n");
+			break;
+
+		case MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED:
+			printk(BIOS_DEBUG, "MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED\n");
+			break;
+
+/*
+		case MEM_WARNING_INITIAL_DDR3VOLT_NONZERO:
+			printk(BIOS_DEBUG, "MEM_WARNING_INITIAL_DDR3VOLT_NONZERO\n");
+			break;
+
+		case MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO:
+			printk(BIOS_DEBUG, "MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO\n");
+			break;
+*/
+
+		case CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR:
+			printk(BIOS_DEBUG, "Allocation rule number that has been violated:");
+			if ((event->EventInfo & 0x000000FF) == 0x01) {
+				printk(BIOS_DEBUG, "AGESA_CACHE_SIZE_REDUCED\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x02) {
+				printk(BIOS_DEBUG, "AGESA_CACHE_REGIONS_ACROSS_1MB\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x03) {
+				printk(BIOS_DEBUG, "AGESA_CACHE_REGIONS_ACROSS_4GB\n");
+			}
+			printk(BIOS_DEBUG, "cache region index:%lx, start:%lx size:%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case CPU_WARNING_ADJUSTED_LEVELING_MODE:
+			printk(BIOS_DEBUG, "CPU_WARNING_ADJUSTED_LEVELING_MODE "
+					"requested: %lx, actual level:%lx\n",
+					event->DataParam1,
+					event->DataParam2);
+			break;
+
+		case CPU_EVENT_PM_PSTATE_OVERCURRENT:
+			printk(BIOS_DEBUG, "CPU_EVENT_PM_PSTATE_OVERCURRENT "
+						"Socket: %lx, Pstate:%lx\n",
+						event->DataParam1,
+						event->DataParam2);
+			break;
+
+		case CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG:
+			printk(BIOS_DEBUG, "CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG\n");
+			break;
+
+/*
+		case CPU_EVENT_UNKNOWN_PROCESSOR_REVISION:
+			printk(BIOS_DEBUG, "CPU_EVENT_UNKNOWN_PROCESSOR_REVISION, socket: %lx, cpuid:%lx\n",
+				event->DataParam1,
+				event->DataParam2);
+			break;
+*/
+
+		case HT_EVENT_OPT_REQUIRED_CAP_RETRY:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_REQUIRED_CAP_RETRY, Socket %lx Link %lx Depth %lx\n",
+				event->DataParam1,
+				event->DataParam2,
+				event->DataParam3);
+			break;
+
+		case HT_EVENT_OPT_REQUIRED_CAP_GEN3:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_REQUIRED_CAP_GEN3, Socket %lx Link %lx Depth %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_OPT_UNUSED_LINKS:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_UNUSED_LINKS, SocketA%lx LinkA%lx SocketB%lx LinkB%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+			break;
+
+		case HT_EVENT_OPT_LINK_PAIR_EXCEED:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_LINK_PAIR_EXCEED, SocketA%lx MasterLink%lx SocketB%lx AltLink%lx\n",
+
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_error(EVENT_PARAMS *event)
+{
+
+	switch (event->EventInfo >> 24) {
+		case 0x04:
+			printk(BIOS_DEBUG, "Memory: Socket %lx Dct %lx Channel%lx ",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case 0x08:
+			printk(BIOS_DEBUG, "Processor: ");
+			break;
+
+		case 0x10:
+			printk(BIOS_DEBUG, "Hyper Transport: ");
+			break;
+
+		default:
+			break;
+	}
+
+	switch (event->EventInfo) {
+		case MEM_ERROR_NO_DQS_POS_RD_WINDOW:
+			printk(BIOS_DEBUG, "No DQS Position window for RD DQS\n");
+			break;
+
+		case MEM_ERROR_SMALL_DQS_POS_RD_WINDOW:
+			printk(BIOS_DEBUG, "Small DQS Position window for RD DQS\n");
+			break;
+
+		case MEM_ERROR_NO_DQS_POS_WR_WINDOW:
+			printk(BIOS_DEBUG, "No DQS Position window for WR DQS\n");
+			break;
+
+		case MEM_ERROR_SMALL_DQS_POS_WR_WINDOW:
+			printk(BIOS_DEBUG, "Small DQS Position window for WR DQS\n");
+			break;
+
+		case MEM_ERROR_DIMM_SPARING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "DIMM sparing has not been enabled for an internal issues\n");
+			break;
+
+		case MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE:
+			printk(BIOS_DEBUG, "Receive Enable value is too large\n");
+			break;
+		case MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW:
+			printk(BIOS_DEBUG, "There is no DQS receiver enable window\n");
+			break;
+
+		case MEM_ERROR_DRAM_ENABLED_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling DramEnabled bit\n");
+			break;
+
+		case MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling DctAccessDone bit\n");
+			break;
+
+		case MEM_ERROR_SEND_CTRL_WORD_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling SendCtrlWord bit\n");
+			break;
+
+		case MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling PrefDramTrainMode bit\n");
+			break;
+
+		case MEM_ERROR_ENTER_SELF_REF_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling EnterSelfRef bit\n");
+			break;
+
+		case MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling FreqChgInProg bit\n");
+			break;
+
+		case MEM_ERROR_EXIT_SELF_REF_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling ExitSelfRef bit\n");
+			break;
+
+		case MEM_ERROR_SEND_MRS_CMD_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling SendMrsCmd bit\n");
+			break;
+
+		case MEM_ERROR_SEND_ZQ_CMD_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling SendZQCmd bit\n");
+			break;
+
+		case MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling DctExtraAccessDone bit\n");
+			break;
+
+		case MEM_ERROR_MEM_CLR_BUSY_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling MemClrBusy bit\n");
+			break;
+
+		case MEM_ERROR_MEM_CLEARED_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling MemCleared bit\n");
+			break;
+
+		case MEM_ERROR_FLUSH_WR_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling FlushWr bit\n");
+			break;
+
+		case MEM_ERROR_MAX_LAT_NO_WINDOW:
+			printk(BIOS_DEBUG, "Fail to find pass during Max Rd Latency training\n");
+			break;
+
+		case MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL:
+			printk(BIOS_DEBUG, "Fail to launch training code on an AP\n");
+			break;
+
+		case MEM_ERROR_PARALLEL_TRAINING_TIME_OUT:
+			printk(BIOS_DEBUG, "Fail to finish parallel training\n");
+			break;
+
+		case MEM_ERROR_NO_ADDRESS_MAPPING:
+			printk(BIOS_DEBUG, "No address mapping found for a dimm\n");
+			break;
+
+		case MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT:
+			printk(BIOS_DEBUG, "There is no DQS receiver enable window and the value is equal to the largest value\n");
+			break;
+
+		case MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE:
+			printk(BIOS_DEBUG, "Receive Enable value is too large and is 1 less than limit\n");
+			break;
+
+		case MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR:
+			printk(BIOS_DEBUG, "SPD Checksum error for NV_SPDCHK_RESTRT\n");
+			break;
+
+		case MEM_ERROR_NO_CHIPSELECT:
+			printk(BIOS_DEBUG, "No chipselects found\n");
+			break;
+
+		case MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM:
+			printk(BIOS_DEBUG, "Unbuffered dimm is not supported at 333MHz\n");
+			break;
+
+		case MEM_ERROR_WL_PRE_OUT_OF_RANGE:
+			printk(BIOS_DEBUG, "Returned PRE value during write levelizzation was out of range\n");
+			break;
+
+		case CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE:
+			printk(BIOS_DEBUG, "No heap is allocated for BrandId structure\n");
+			break;
+
+		case CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED:
+			printk(BIOS_DEBUG, "Unable to load micro code patch\n");
+			break;
+
+		case CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE:
+			printk(BIOS_DEBUG, "No heap is allocated for the Pstate structure\n");
+			break;
+
+/*
+		case CPU_ERROR_PM_NB_PSTATE_MISMATCH:
+			printk(BIOS_DEBUG, "NB P-state indicated by Index was disabled due to mismatch between processors\n");
+			break;
+*/
+
+		case CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR:
+			printk(BIOS_DEBUG, "Allocation rule number that has been violated:");
+			if ((event->EventInfo & 0x000000FF) == 0x04) {
+				printk(BIOS_DEBUG, "AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x05) {
+				printk(BIOS_DEBUG, "AGESA_START_ADDRESS_LESS_D0000\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x06) {
+				printk(BIOS_DEBUG, "AGESA_THREE_CACHE_REGIONS_ABOVE_1MB\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x07) {
+				printk(BIOS_DEBUG, "AGESA_DEALLOCATE_CACHE_REGIONS\n");
+			}
+			printk(BIOS_DEBUG, "cache region index:%lx, start:%lx size:%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_COH_NO_TOPOLOGY:
+			printk(BIOS_DEBUG, "no Matching Topology was found during coherent initializatio TotalHtNodes: %lx\n",
+					event->DataParam1);
+			break;
+
+		case HT_EVENT_NCOH_BUID_EXCEED:
+			printk(BIOS_DEBUG, "there is a limit of 32 unit IDs per chain Socket%lx Link%lx Depth%lx"
+					"Current BUID: %lx, Unit Count: %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4 >> 16,
+					event->DataParam4 & 0x0000FFFF);
+			break;
+
+		 case HT_EVENT_NCOH_BUS_MAX_EXCEED:
+			printk(BIOS_DEBUG, "maximum auto bus limit exceeded, Socket %lx Link %lx Bus %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_NCOH_CFG_MAP_EXCEED:
+			printk(BIOS_DEBUG, "there is a limit of four non-coherent chains, Socket %lx Link %lx\n",
+					event->DataParam1,
+					event->DataParam2);
+			break;
+
+		case HT_EVENT_NCOH_DEVICE_FAILED:
+			printk(BIOS_DEBUG, "after assigning an IO Device an ID, it does not respond at the new ID"
+					"Socket %lx Link %lx Depth %lx DeviceID %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+		default:
+			break;
+	}
+}
+/**
+ *
+ */
+static void agesa_critical(EVENT_PARAMS *event)
+{
+	switch (event->EventInfo) {
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3:
+			printk(BIOS_DEBUG, "Socket: %lx, Heap allocation error for DMI table for DDR3\n",
+					event->DataParam1);
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2:
+			printk(BIOS_DEBUG, "Socket: %lx, Heap allocation error for DMI table for DDR2\n",
+					event->DataParam1);
+			break;
+
+		case MEM_ERROR_UNSUPPORTED_DIMM_CONFIG:
+			printk(BIOS_DEBUG, "Socket: %lx, Dimm population is not supported\n",
+					event->DataParam1);
+			break;
+
+		case HT_EVENT_COH_PROCESSOR_TYPE_MIX:
+			printk(BIOS_DEBUG, "Socket %lx Link %lx TotalSockets %lx, HT_EVENT_COH_PROCESSOR_TYPE_MIX \n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_COH_MPCAP_MISMATCH:
+			printk(BIOS_DEBUG, "Socket %lx Link %lx MpCap %lx TotalSockets %lx, HT_EVENT_COH_MPCAP_MISMATCH\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_fatal(EVENT_PARAMS *event)
+{
+
+	switch (event->EventInfo >> 24) {
+		case 0x04:
+			printk(BIOS_DEBUG, "Memory: Socket %lx Dct %lx Channel%lx ",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case 0x08:
+			printk(BIOS_DEBUG, "Processor: ");
+			break;
+
+		case 0x10:
+			printk(BIOS_DEBUG, "Hyper Transport: ");
+			break;
+
+		default:
+			break;
+	}
+
+	switch (event->EventInfo) {
+		case MEM_ERROR_MINIMUM_MODE:
+			printk(BIOS_DEBUG, "Running in minimum mode\n");
+			break;
+
+		case MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM:
+			printk(BIOS_DEBUG, "DIMM modules are missmatched\n");
+			break;
+
+		case MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM:
+			printk(BIOS_DEBUG, "No DIMMs have been foun\n");
+			break;
+
+		case MEM_ERROR_MISMATCH_DIMM_CLOCKS:
+			printk(BIOS_DEBUG, "DIMM clocks miss-matched\n");
+			break;
+
+		case MEM_ERROR_NO_CYC_TIME:
+			printk(BIOS_DEBUG, "No cycle time found\n");
+			break;
+		case MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS:
+			printk(BIOS_DEBUG, "Heap allocation error with dynamic storing of trained timings\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs:
+			printk(BIOS_DEBUG, "Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV:
+			printk(BIOS_DEBUG, "Heap allocation error with REMOTE_TRAINING_ENV\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_SPD:
+			printk(BIOS_DEBUG, "Heap allocation error for SPD data\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA:
+			printk(BIOS_DEBUG, "Heap allocation error for RECEIVED_DATA during parallel training\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS:
+			printk(BIOS_DEBUG, "Heap allocation error for S3 \"SPECIAL_CASE_REGISTER\"\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA:
+			printk(BIOS_DEBUG, "Heap allocation error for Training Data\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK:
+			printk(BIOS_DEBUG, "Heap allocation error for  DIMM Identify \"MEM_NB_BLOCK\"\n");
+			break;
+
+		case MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM:
+			printk(BIOS_DEBUG, "No Constructor for DIMM Identify\n");
+			break;
+
+		case MEM_ERROR_VDDIO_UNSUPPORTED:
+			printk(BIOS_DEBUG, "VDDIO of the dimms on the board is not supported\n");
+			break;
+
+		case CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT:
+			printk(BIOS_DEBUG, "Socket: %lx, All PStates exceeded the motherboard current limit on specified socket\n",
+				event->DataParam1);
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ * Interprte the agesa event log to an user readable string
+ */
+static void interpret_agesa_eventlog(EVENT_PARAMS *event)
+{
+	switch (event->EventClass) {
+		case AGESA_BOUNDS_CHK:
+			agesa_bound_check(event);
+			break;
+
+		case AGESA_ALERT:
+			agesa_alert(event);
+			break;
+
+		case AGESA_WARNING:
+			agesa_warning(event);
+			break;
+
+		case AGESA_ERROR:
+			agesa_error(event);
+			break;
+
+		case AGESA_CRITICAL:
+			agesa_critical(event);
+			break;
+
+		case AGESA_FATAL:
+			agesa_fatal(event);
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ * @param  HeapStatus -the current HeapStatus
+ */
+UINT32 agesawrapper_amdreadeventlog(UINT8 HeapStatus)
+{
+	printk(BIOS_DEBUG, "enter in %s\n", __func__);
+	AGESA_STATUS Status;
+	EVENT_PARAMS AmdEventParams;
+
+	LibAmdMemFill(&AmdEventParams,
+			0,
+			sizeof(EVENT_PARAMS),
+			&(AmdEventParams.StdHeader));
+
+	AmdEventParams.StdHeader.AltImageBasePtr = 0;
+	AmdEventParams.StdHeader.CalloutPtr = NULL;
+	AmdEventParams.StdHeader.Func = 0;
+	AmdEventParams.StdHeader.ImageBasePtr = 0;
+	/* I have to know the current HeapStatus to Locate the EventLogHeapPointer */
+	AmdEventParams.StdHeader.HeapStatus = HeapStatus;
+	Status = AmdReadEventLog(&AmdEventParams);
+	while (AmdEventParams.EventClass != 0) {
+		printk(BIOS_DEBUG,"\nEventLog:  EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo);
+		printk(BIOS_DEBUG,"  Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2);
+		printk(BIOS_DEBUG,"  Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4);
+		interpret_agesa_eventlog(&AmdEventParams);
+		Status = AmdReadEventLog(&AmdEventParams);
+	}
+
+	printk(BIOS_DEBUG, "exit %s \n", __func__);
+	return (UINT32)Status;
+}
+
diff --git a/src/mainboard/tyan/s8226/agesawrapper.h b/src/mainboard/tyan/s8226/agesawrapper.h
new file mode 100644
index 0000000..43c7d10
--- /dev/null
+++ b/src/mainboard/tyan/s8226/agesawrapper.h
@@ -0,0 +1,87 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#ifndef _AGESAWRAPPER_H_
+#define _AGESAWRAPPER_H_
+
+#include <stdint.h>
+#include "Porting.h"
+#include "AGESA.h"
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define PCIE_BASE_ADDRESS   CONFIG_MMCONF_BASE_ADDRESS
+
+enum {
+	PICK_DMI,       /* DMI Interface */
+	PICK_PSTATE,    /* Acpi Pstate SSDT Table */
+	PICK_SRAT,      /* SRAT Table */
+	PICK_SLIT,      /* SLIT Table */
+	PICK_WHEA_MCE,  /* WHEA MCE table */
+	PICK_WHEA_CMC,  /* WHEA CMV table */
+	PICK_ALIB,      /* SACPI SSDT table with ALIB implementation */
+};
+
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef struct {
+	UINT32 CalloutName;
+	AGESA_STATUS (*CalloutPtr)(UINT32 Func, UINT32 Data, VOID* ConfigPtr);
+} BIOS_CALLOUT_STRUCT;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+UINT32 agesawrapper_amdinitreset (void);
+UINT32 agesawrapper_amdinitearly (void);
+UINT32 agesawrapper_amdinitenv (void);
+UINT32 agesawrapper_amdinitlate (void);
+UINT32 agesawrapper_amdinitpost (void);
+UINT32 agesawrapper_amdinitmid (void);
+UINT32 agesawrapper_amdreadeventlog (UINT8 HeapStatus);
+UINT32 agesawrapper_amdinitmmio (void);
+void *agesawrapper_getlateinitptr (int pick);
+UINT32 agesawrapper_amdlaterunaptask(UINT32 Data, VOID *ConfigPtr);
+
+#endif
diff --git a/src/mainboard/tyan/s8226/buildOpts.c b/src/mainboard/tyan/s8226/buildOpts.c
new file mode 100644
index 0000000..0f618ec
--- /dev/null
+++ b/src/mainboard/tyan/s8226/buildOpts.c
@@ -0,0 +1,616 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "CommonReturns.h"
+#include "AdvancedApi.h"
+#include <PlatformMemoryConfiguration.h>
+#include "Filecode.h"
+#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
+
+/* AGESA will check the OEM configuration during preprocessing stage,
+ * coreboot enable -Wundef option, so we should make sure we have all contanstand defined
+ */
+/* MEMORY_BUS_SPEED */
+#define  DDR400_FREQUENCY		200	///< DDR 400
+#define  DDR533_FREQUENCY		266	///< DDR 533
+#define  DDR667_FREQUENCY		333	///< DDR 667
+#define  DDR800_FREQUENCY		400	///< DDR 800
+#define  DDR1066_FREQUENCY		533	///< DDR 1066
+#define  DDR1333_FREQUENCY		667	///< DDR 1333
+#define  DDR1600_FREQUENCY		800	///< DDR 1600
+#define  DDR1866_FREQUENCY		933	///< DDR 1866
+#define  UNSUPPORTED_DDR_FREQUENCY	934	///< Highest limit of DDR frequency
+
+/* QUANDRANK_TYPE*/
+#define QUADRANK_REGISTERED		0	///< Quadrank registered DIMM
+#define QUADRANK_UNBUFFERED		1	///< Quadrank unbuffered DIMM
+
+/* USER_MEMORY_TIMING_MODE */
+#define TIMING_MODE_AUTO		0	///< Use best rate possible
+#define TIMING_MODE_LIMITED		1	///< Set user top limit
+#define TIMING_MODE_SPECIFIC		2	///< Set user specified speed
+
+/* POWER_DOWN_MODE */
+#define POWER_DOWN_BY_CHANNEL		0	///< Channel power down mode
+#define POWER_DOWN_BY_CHIP_SELECT	1	///< Chip select power down mode
+
+/* User makes option selections here
+ * Comment out the items wanted to be included in the build.
+ * Uncomment those items you with to REMOVE from the build.
+ */
+//#define BLDOPT_REMOVE_UDIMMS_SUPPORT           TRUE
+//#define BLDOPT_REMOVE_RDIMMS_SUPPORT           TRUE
+//#define BLDOPT_REMOVE_ECC_SUPPORT              TRUE
+//#define BLDOPT_REMOVE_BANK_INTERLEAVE          TRUE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE           TRUE
+//#define BLDOPT_REMOVE_NODE_INTERLEAVE          TRUE
+//#define BLDOPT_REMOVE_PARALLEL_TRAINING        TRUE
+//#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT     TRUE
+#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT      TRUE
+//#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT      TRUE
+////#define BLDOPT_REMOVE_ACPI_PSTATES             TRUE
+////#define BLDOPT_REMOVE_SRAT                     TRUE
+////#define BLDOPT_REMOVE_SLIT                     TRUE
+//#define BLDOPT_REMOVE_WHEA                     TRUE
+//#define BLDOPT_REMOVE_DMI                      TRUE
+
+/*f15 Rev A1 ucode patch CpuF15OrMicrocodePatch0600011F */
+#define BLDOPT_REMOVE_EARLY_SAMPLES		FALSE
+
+//#define BLDOPT_REMOVE_HT_ASSIST                TRUE
+//#define BLDOPT_REMOVE_MSG_BASED_C1E            TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS              TRUE
+
+/* Build configuration values here.
+ */
+#define BLDCFG_VRM_CURRENT_LIMIT                 120000
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD           0
+#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT          0
+#define BLDCFG_PLAT_NUM_IO_APICS                 3
+#define BLDCFG_CORE_LEVELING_MODE                CORE_LEVEL_LOWEST
+#define BLDCFG_MEM_INIT_PSTATE                   0
+#define BLDCFG_AMD_PSTATE_CAP_VALUE              0
+
+#define BLDCFG_AMD_PLATFORM_TYPE                  AMD_PLATFORM_SERVER
+
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT         DDR1333_FREQUENCY//1600
+#define BLDCFG_MEMORY_MODE_UNGANGED               TRUE
+#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE           TRUE
+#define BLDCFG_MEMORY_QUADRANK_TYPE               QUADRANK_REGISTERED
+#define BLDCFG_MEMORY_RDIMM_CAPABLE               TRUE
+#define BLDCFG_MEMORY_UDIMM_CAPABLE               TRUE
+#define BLDCFG_MEMORY_SODIMM_CAPABLE              FALSE
+#define BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB          TRUE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING    FALSE//TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING    FALSE//TRUE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING        FALSE//TRUE
+#define BLDCFG_MEMORY_POWER_DOWN                  FALSE
+#define BLDCFG_POWER_DOWN_MODE                    POWER_DOWN_BY_CHANNEL
+#define BLDCFG_ONLINE_SPARE                       FALSE
+#define BLDCFG_BANK_SWIZZLE                       TRUE
+#define BLDCFG_TIMING_MODE_SELECT                 TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT                DDR1333_FREQUENCY //DDR800_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL               TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM                FALSE
+#define BLDCFG_USE_BURST_MODE                     FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON               FALSE
+#define BLDCFG_ENABLE_ECC_FEATURE                 TRUE
+#define BLDCFG_ECC_REDIRECTION                    FALSE
+#define BLDCFG_SCRUB_IC_RATE                      0
+#define BLDCFG_ECC_SYNC_FLOOD                     TRUE
+#define BLDCFG_ECC_SYMBOL_SIZE                    4
+
+#define BLDCFG_PCI_MMIO_BASE                    CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE                    CONFIG_MMCONF_BUS_NUMBER
+
+/**
+ * Enable Message Based C1e CPU feature in multi-socket systems.
+ * BLDCFG_PLATFORM_C1E_OPDATA element be defined with a valid IO port value,
+ * else the feature cannot be enabled.
+ */
+#define BLDCFG_PLATFORM_C1E_MODE                  C1eModeMsgBased
+#define BLDCFG_PLATFORM_C1E_OPDATA                0x80//TODO
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1        0
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2        0
+
+#define BLDCFG_HEAP_DRAM_ADDRESS                  0xB0000
+#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS    0xD0000000
+#define BLDCFG_1GB_ALIGN                          FALSE
+//#define BLDCFG_PROCESSOR_SCOPE_NAME0              'C'
+//#define BLDCFG_PROCESSOR_SCOPE_NAME1              '0'
+//
+
+// Select the platform control flow mode for performance tuning.
+#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm
+
+/**
+ * Enable the probe filtering performance tuning feature.
+ * The probe filter provides filtering of broadcast probes to
+ * improve link bandwidth and performance for multi- node systems.
+ *
+ * This feature may interact with other performance features.
+ *  TRUE  -Enable the feature (default) if supported by all processors,
+ *         based on revision and presence of L3 cache.
+ *         The feature is not enabled if there are no coherent HT links.
+ *  FALSE -Do not enable the feature regardless of the configuration.
+ */
+//TODO enable it,
+//but AGESA set PFMode = 0; //PF Disable, HW never set PFInitDone
+//hang in F10HtAssistInit() do{...} while(PFInitDone != 1)
+#define BLDCFG_USE_HT_ASSIST	FALSE
+
+/**
+ * The socket and link match values are platform specific
+ */
+CONST MANUAL_BUID_SWAP_LIST ROMDATA s8226_manual_swaplist[2] =
+{
+	{
+		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		{ //BUID Swap List
+			{ //BUID Swaps
+				/* Each Non-coherent chain may have a list of device swaps,
+				 * Each item specify a device will be swap from its current id to a new one
+				 */
+				/* FromID 0x00 is the chain with the southbridge */
+				/* 'Move' device zero to device zero, All others are non applicable */
+				{0x00, 0x00}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+			},
+
+			{ //The ordered final BUIDs
+				/* Specify the final BUID to be zero, All others are non applicable */
+				0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+			}
+		}
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+
+#if CONFIG_HT3_SUPPORT == 1
+/**
+ * The socket and link match values are platform specific
+ *
+ */
+CONST CPU_TO_CPU_PCB_LIMITS ROMDATA s8226_cpu2cpu_limit_list[2] =
+{
+	{
+		/* On the reference platform, these settings apply to all coherent links */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set incoming and outgoing links to 16 bit widths, and 3.2GHz frequencies */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M,
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+
+CONST IO_PCB_LIMITS ROMDATA s8226_io_limit_list[2] =
+{
+	{
+		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set upstream and downstream links to 16 bit widths, and limit frequencies to 3.2GHz */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M, //Actually IO hub only support 2600M MAX
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+#else //CONFIG_HT3_SUPPORT == 0
+CONST CPU_TO_CPU_PCB_LIMITS ROMDATA s8226_cpu2cpu_limit_list[2] =
+{
+	{
+		/* On the reference platform, these settings apply to all coherent links */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY,
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+
+CONST IO_PCB_LIMITS ROMDATA s8226_io_limit_list[2] =
+{
+	{
+		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY,
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL
+	}
+};
+#endif //CONFIG_HT3_SUPPORT == 0
+
+/**
+ * HyperTransport links will typically require an equalization at high frequencies.
+ * This is called deemphasis.
+ *
+ * Deemphasis is specified as levels, for example, -3 db.
+ * There are two levels for each link, its receiver deemphasis level and its DCV level,
+ * which is based on the far side transmitter's deemphasis.
+ * For each link, different levels may be required at each link frequency.
+ *
+ * Coherent connections between processors should have an entry for the port on each processor.
+ * There should be one entry for the host root port of each non-coherent chain.
+ *
+ * AGESA initialization code does not set deemphasis on IO Devices.
+ * A default is provided for internal links of MCM processors, and
+ * those links will generally not need deemphasis structures.
+ */
+CONST CPU_HT_DEEMPHASIS_LEVEL ROMDATA s8226_deemphasis_list[] =
+{
+	/* Socket, Link, LowFreq, HighFreq, Receiver Deemphasis, Dcv Deemphasis */
+
+	/* Non-coherent link deemphasis. */
+	{0, 2, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{0, 2, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{0, 2, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{0, 2, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{0, 2, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{0, 2, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	{1, 2, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{1, 2, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{1, 2, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{1, 2, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{1, 2, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{1, 2, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	{2, 0, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{2, 0, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{2, 0, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{2, 0, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{2, 0, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{2, 0, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	{3, 0, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{3, 0, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{3, 0, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{3, 0, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{3, 0, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{3, 0, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	/* Coherent link deemphasis. */
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus3},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus6},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus6},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus8},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2600M, HT_FREQUENCY_MAX, DeemphasisLevelMinus11pre8, DcvLevelMinus11},
+
+	/* End of the list */
+	{
+		HT_LIST_TERMINAL
+	}
+};
+
+/**
+ * For systems using socket infrastructure that permits strapping the SBI
+ * address for each socket, this should be used to provide a socket ID value.
+ * This is referred to as the hardware method for socket naming, and is the
+ * preferred solution.
+ */
+/*
+ * I do NOT know howto config socket id in simnow,
+ * so use this software way to make HT works in simnow,
+ * real hardware do not need this Socket Map.
+ *
+ * A physical socket map for a 4 G34 Sockets MCM processors topology,
+ * reference the mainboard schemantic in detail.
+ *
+ */
+CONST SYSTEM_PHYSICAL_SOCKET_MAP ROMDATA s8226_socket_map[] =
+{
+#define HT_SOCKET0	0
+#define HT_SOCKET1	1
+#define HT_SOCKET2	2
+#define HT_SOCKET3	3
+
+/**
+ * 0-3 are sublink 0, 4-7 are sublink 1
+ */
+#define HT_LINK0A	0
+#define HT_LINK1A	1
+#define HT_LINK2A	2
+#define HT_LINK3A	3
+#define HT_LINK0B	4
+#define HT_LINK1B	5
+#define HT_LINK2B	6
+#define HT_LINK3B	7
+
+	/* Source Socket, Link, Target Socket */
+/*	{HT_SOCKET0, HT_LINK0A, HT_SOCKET1},
+	{HT_SOCKET0, HT_LINK0B, HT_SOCKET3},
+	{HT_SOCKET0, HT_LINK1A, HT_SOCKET1},
+	{HT_SOCKET0, HT_LINK1B, HT_SOCKET3},
+	{HT_SOCKET0, HT_LINK3A, HT_SOCKET2},
+	{HT_SOCKET0, HT_LINK3B, HT_SOCKET2},
+
+	{HT_SOCKET1, HT_LINK0A, HT_SOCKET2},
+	{HT_SOCKET1, HT_LINK0B, HT_SOCKET3},
+	{HT_SOCKET1, HT_LINK1A, HT_SOCKET0},
+	{HT_SOCKET1, HT_LINK1B, HT_SOCKET2},
+	{HT_SOCKET1, HT_LINK3A, HT_SOCKET0},
+	{HT_SOCKET1, HT_LINK3B, HT_SOCKET3},
+
+	{HT_SOCKET2, HT_LINK0A, HT_SOCKET3},
+	{HT_SOCKET2, HT_LINK0B, HT_SOCKET0},
+	{HT_SOCKET2, HT_LINK1A, HT_SOCKET3},
+	{HT_SOCKET2, HT_LINK1B, HT_SOCKET1},
+	{HT_SOCKET2, HT_LINK3A, HT_SOCKET1},
+	{HT_SOCKET2, HT_LINK3B, HT_SOCKET0},
+
+	{HT_SOCKET3, HT_LINK0A, HT_SOCKET2},
+	{HT_SOCKET3, HT_LINK0B, HT_SOCKET1},
+	{HT_SOCKET3, HT_LINK1A, HT_SOCKET1},
+	{HT_SOCKET3, HT_LINK1B, HT_SOCKET0},
+	{HT_SOCKET3, HT_LINK3A, HT_SOCKET0},
+	{HT_SOCKET3, HT_LINK3B, HT_SOCKET2}, */
+};
+
+CONST AP_MTRR_SETTINGS ROMDATA s8226_ap_mtrr_list[] =
+{
+	{AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E},
+	{AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E},
+	{AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_C0000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_C8000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_D0000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_D8000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_E0000,  0x1818181818181818},
+	{AMD_AP_MTRR_FIX4k_E8000,  0x1818181818181818},
+	{AMD_AP_MTRR_FIX4k_F0000,  0x1818181818181818},
+	{AMD_AP_MTRR_FIX4k_F8000,  0x1818181818181818},
+	{CPU_LIST_TERMINAL}
+};
+
+#define BLDCFG_BUID_SWAP_LIST			&s8226_manual_swaplist
+#define BLDCFG_HTFABRIC_LIMITS_LIST		&s8226_cpu2cpu_limit_list
+#define BLDCFG_HTCHAIN_LIMITS_LIST		&s8226_io_limit_list
+#define BLDCFG_PLATFORM_DEEMPHASIS_LIST		&s8226_deemphasis_list
+#define BLDCFG_AP_MTRR_SETTINGS_LIST		&s8226_ap_mtrr_list
+//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP	&s8226_socket_map
+
+
+/*  Process the options...
+ * This file include MUST occur AFTER the user option selection settings
+ */
+#define AGESA_ENTRY_INIT_RESET                    TRUE//FALSE
+#define AGESA_ENTRY_INIT_RECOVERY                 FALSE
+#define AGESA_ENTRY_INIT_EARLY                    TRUE
+#define AGESA_ENTRY_INIT_POST                     TRUE
+#define AGESA_ENTRY_INIT_ENV                      TRUE
+#define AGESA_ENTRY_INIT_MID                      TRUE
+#define AGESA_ENTRY_INIT_LATE                     TRUE
+#define AGESA_ENTRY_INIT_S3SAVE                   TRUE
+#define AGESA_ENTRY_INIT_RESUME                   TRUE
+#define AGESA_ENTRY_INIT_LATE_RESTORE             TRUE
+#define AGESA_ENTRY_INIT_GENERAL_SERVICES         TRUE
+
+/*
+#if (CONFIG_CPU_AMD_AGESA_FAMILY15 == 1)
+  #define BLDOPT_REMOVE_FAMILY_10_SUPPORT         TRUE
+#endif
+#if (CONFIG_CPU_AMD_AGESA_FAMILY10 == 1)
+  #define BLDOPT_REMOVE_FAMILY_15_SUPPORT         TRUE
+#endif
+*/
+
+//#include "GnbInterface.h"     /*prototype for GnbInterfaceStub*/
+#include "SanMarinoInstall.h"
+
+/*----------------------------------------------------------------------------------------
+ *                        CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+//reference BKDG Table87: works
+#define F15_WL_SEED 0x3B //family15 BKDG recommand 3B RDIMM, 1A UDIMM.
+#define SEED_A 0x54
+#define SEED_B 0x4D
+#define SEED_C 0x45
+#define SEED_D 0x40
+
+#define F10_WL_SEED 0x3B //family10 BKDG recommand 3B RDIMM, 1A UDIMM.
+//4B 41 51
+
+/*
+ *  Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ *  (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ *  is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ *  use its default conservative settings.
+ */
+CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+	//
+	// The following macros are supported (use comma to separate macros):
+	//
+	// MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
+	//      The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
+	//      AGESA will base on this value to disable unused MemClk to save power.
+	//      Example:
+	//      BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
+	//           Bit AM3/S1g3 pin name
+	//           0   M[B,A]_CLK_H/L[0]
+	//           1   M[B,A]_CLK_H/L[1]
+	//           2   M[B,A]_CLK_H/L[2]
+	//           3   M[B,A]_CLK_H/L[3]
+	//           4   M[B,A]_CLK_H/L[4]
+	//           5   M[B,A]_CLK_H/L[5]
+	//           6   M[B,A]_CLK_H/L[6]
+	//           7   M[B,A]_CLK_H/L[7]
+	//      And platform has the following routing:
+	//           CS0   M[B,A]_CLK_H/L[4]
+	//           CS1   M[B,A]_CLK_H/L[2]
+	//           CS2   M[B,A]_CLK_H/L[3]
+	//           CS3   M[B,A]_CLK_H/L[5]
+	//      Then platform can specify the following macro:
+	//      MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
+	//
+	// CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
+	//      The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
+	//      AGESA will base on this value to tristate unused CKE to save power.
+	//
+	// ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
+	//      The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
+	//      AGESA will base on this value to tristate unused ODT pins to save power.
+	//
+	// CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
+	//      The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
+	//      AGESA will base on this value to tristate unused Chip select to save power.
+	//
+	// NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
+	//      Specifies the number of DIMM slots per channel.
+	//
+	// NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
+	//      Specifies the number of Chip selects per channel.
+	//
+	// NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
+	//      Specifies the number of channels per socket.
+	//
+	// OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
+	//      Specifies DDR bus speed of channel ChannelID on socket SocketID.
+	//
+	// DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
+	//      Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
+	//
+	// WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+	//      Byte6Seed, Byte7Seed, ByteEccSeed)
+	//      Specifies the write leveling seed for a channel of a socket.
+	//
+
+	/* Specifies the write leveling seed for a channel of a socket.
+	 * WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID,
+	 *                     Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed,
+	 *                     Byte4Seed, Byte5Seed, Byte6Seed, Byte7Seed,
+	 *                     ByteEccSeed)
+	 */
+	WRITE_LEVELING_SEED(
+			ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS,
+			F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED,
+			F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED,
+			F15_WL_SEED),
+
+	/* HW_RXEN_SEED(SocketID, ChannelID, DimmID,
+	 *              Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed,
+	 *              Byte4Seed, Byte5Seed, Byte6Seed, Byte7Seed, ByteEccSeed)
+	 */
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
+		SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A,
+		SEED_A),
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_B, ALL_DIMMS,
+		SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B,
+		SEED_B),
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_C, ALL_DIMMS,
+		SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C,
+		SEED_C),
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_D, ALL_DIMMS,
+		SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D,
+		SEED_D),
+
+	NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 3), //max 3
+	PSO_END
+};
+
+/*
+ * These tables are optional and may be used to adjust memory timing settings
+ */
+//HY Customer table
+UINT8 AGESA_MEM_TABLE_HY[][sizeof (MEM_TABLE_ALIAS)] =
+{
+	// Hardcoded Memory Training Values
+
+	// The following macro should be used to override training values for your platform
+	//
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
+	//
+	//   NOTE:
+	//   The following training hardcode values are example values that were taken from a tilapia motherboard
+	//   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
+	//   the table and replace the byte lane values with your own.
+	//
+	//                                                                               ------------------ BYTE LANES ----------------------
+	//                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
+	// Write Data Timing
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
+
+	// DQS Receiver Enable
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
+
+	// Write DQS Delays
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
+
+	// Read DQS Delays
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
+	//--------------------------------------------------------------------------------------------------------------------------------------------------
+	// TABLE END
+	NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
+};
+UINT8 SizeOfTableHy = sizeof (AGESA_MEM_TABLE_HY) / sizeof (AGESA_MEM_TABLE_HY[0]);
+
diff --git a/src/mainboard/tyan/s8226/cmos.layout b/src/mainboard/tyan/s8226/cmos.layout
new file mode 100644
index 0000000..3b98cbb
--- /dev/null
+++ b/src/mainboard/tyan/s8226/cmos.layout
@@ -0,0 +1,118 @@
+#*****************************************************************************
+#
+#  This file is part of the coreboot project.
+#
+#  Copyright (C) 2011 Advanced Micro Devices, Inc.
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; version 2 of the License.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#*****************************************************************************
+
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399          1       e       2        multi_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432          8       h       0        boot_countdown
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        amd_reserved
+
+
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+8     0     400Mhz
+8     1     333Mhz
+8     2     266Mhz
+8     3     200Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/tyan/s8226/devicetree.cb b/src/mainboard/tyan/s8226/devicetree.cb
new file mode 100644
index 0000000..4459019
--- /dev/null
+++ b/src/mainboard/tyan/s8226/devicetree.cb
@@ -0,0 +1,128 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+chip northbridge/amd/agesa/family15/root_complex
+	device lapic_cluster 0 on
+		chip cpu/amd/agesa/family15
+			device lapic 0x20 on end #f15
+			#device lapic 0x10 on end #f10
+		end
+	end
+	device pci_domain 0 on
+		subsystemid 0x15d9 0xab11 inherit #Tyan
+		chip northbridge/amd/agesa/family15 # CPU side of HT root complex
+			device pci 18.0 on     # Put IO-HUB at link_num 0, Instead of HT Link topology
+				chip northbridge/amd/cimx/rd890 # Southbridge PCI side of HT Root complex
+					device pci 0.0 on  end # HT Root Complex 0x9600
+					device pci 0.1 off end # CLKCONFIG
+					device pci 2.0 on  end # GPP1 Port0  x16 SLOT4, 0x5A16
+					device pci 3.0 off end # GPP1 Port1
+					device pci 4.0 on end # GPP3a Port0  x4 SAS
+					device pci 5.0 on end # GPP3a Port1
+					device pci 6.0 on end # GPP3a Port2
+					device pci 7.0 on end # GPP3a Port3
+					device pci 8.0 off end # NB/SB Link P2P bridge, should be hidden at boot time
+					device pci 9.0 on end # GPP3a Port4  x1 NC
+					device pci a.0 on end # GPP3a Port5  x1 NC
+					device pci b.0 on end # GPP2 Port0 (Not for sr5650)
+					device pci c.0 off end # GPP2 Port1 (Not for sr5650/sr5670)
+					device pci d.0 on  end # GPP3b Port0 (Not for sr5650/sr5670) 0x5A1E, Intel 82576
+					register "gpp1_configuration" = "0"   # Configuration 16:0 default
+					register "gpp2_configuration" = "0"   # Configuration 8:8
+					register "gpp3a_configuration" = "2"   # 2 Configuration 4:1:1:0:0:0, 11 Configuration 1:1:1:1:1:1
+					register "port_enable" = "0x3ef6"
+				end #northbridge/amd/cimx/rd890
+				chip southbridge/amd/cimx/sb700 # it is under NB/SB Link, but on the same pci bus
+					device pci 11.0 on end # SATA
+					device pci 12.0 on end # USB1
+					device pci 12.1 on end # USB1
+					device pci 12.2 on end # USB1
+					device pci 13.0 on end # USB2
+					device pci 13.1 on end # USB2
+					device pci 13.2 on end # USB2
+					device pci 14.0 on end # SM
+					device pci 14.1 off end # IDE  0x439c
+					device pci 14.2 off end # HDA  0x4383, s8226 not have codec.
+					device pci 14.3 on # LPC  0x439d
+						chip superio/winbond/w83627dhg
+							device pnp 2e.0 off #  Floppy
+								io 0x60 = 0x3f0
+								irq 0x70 = 6
+								drq 0x74 = 2
+							end
+							device pnp 2e.1 off #  Parallel Port
+								io 0x60 = 0x378
+								irq 0x70 = 7
+							end
+							device pnp 2e.2 on  #  Com1
+								io 0x60 = 0x3f8
+								irq 0x70 = 4
+							end
+							device pnp 2e.3 on  #  Com2
+								io 0x60 = 0x2f8
+								irq 0x70 = 3
+							end
+							## though UARTs are on the NUVOTON BMC, superio only used to support PS2 KB/MS##
+							device pnp 2e.5 on #  PS/2 keyboard & mouse
+								io 0x60 = 0x60
+								io 0x62 = 0x64
+								irq 0x70 = 0x01 #keyboard
+								irq 0x72 = 0x0C #mouse
+							end
+							device pnp 2e.6 off #  SPI
+							end
+							device pnp 2e.307 off #  GPIO6
+							end
+							device pnp 2e.8 off #  WDTO#, PLED
+							end
+							device pnp 2e.009 off #  GPIO2
+							end
+							device pnp 2e.109 off #  GPIO3
+							end
+							device pnp 2e.209 off #  GPIO4
+							end
+							device pnp 2e.309 off #  GPIO5
+							end
+							device pnp 2e.a off #  ACPI
+							end
+							device pnp 2e.b off # HWM
+								io 0x60 = 0x290
+							end
+							device pnp 2e.c off # PECI, SST
+							end
+						end #superio/winbond/w83627dhg
+						chip drivers/i2c/w83795
+							device pnp 5e on #hwm
+							end
+						end #drivers/i2c/w83795
+					end # LPC
+					device pci 14.4 on end # PCI 0x4384
+					device pci 14.5 on end # USB 3
+					register "boot_switch_sata_ide" = "0"   # 0: boot from SATA. 1: IDE
+				end # southbridge/amd/cimx/sb700
+			end # device pci 18.0
+
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+			device pci 18.4 on end
+			device pci 18.5 on end #f15
+		end #chip northbridge/amd/agesa/family15 # CPU side of HT root complex
+	end #pci_domain
+end #northbridge/amd/agesa/family15/root_complex
+
diff --git a/src/mainboard/tyan/s8226/dimmSpd.c b/src/mainboard/tyan/s8226/dimmSpd.c
new file mode 100644
index 0000000..df33088
--- /dev/null
+++ b/src/mainboard/tyan/s8226/dimmSpd.c
@@ -0,0 +1,222 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_ids.h>
+
+AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info);
+#define DIMENSION(array)(sizeof (array)/ sizeof (array [0]))
+
+/* SP5100 GPIO 49-52 contoled by SMBUS PCI_Reg 0x52 */
+#define SP5100_GPIO37_46_47_48	0xA6
+#define SP5100_GPIO49_52	0x50
+
+/**
+ * TODO not support all GPIO yet
+ * @param reg -GPIO Cntrl Register
+ * @param out -GPIO bitmap
+ * @param out -GPIO enable bitmap
+ * @return  old setting
+ */
+static u8 sp5100_set_gpio(u8 reg, u8 out, u8 enable)
+{
+	u8 value, ret;
+	device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBUS
+
+	value = pci_read_config8(sm_dev, reg);
+	ret = value;
+	value &= ~(enable);
+	value |= out;
+	value &= ~(enable << 4);
+	pci_write_config8(sm_dev, reg, value);
+
+	return ret;
+}
+
+static void sp5100_restore_gpio(u8 reg, u8 value)
+{
+	device_t sm_dev = PCI_DEV(0, 0x14, 0);
+	pci_write_config8(sm_dev, reg, value);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * SPD address table - porting required
+ */
+static const UINT8 spdAddressLookup [2] [2] [3] = { // socket, channel, dimm
+	/* socket 0 */
+	{
+		{0xA0, 0xA4, 0xA8},
+		{0xA2, 0xA6, 0xAA},
+	},
+	/* socket 1 */
+	{
+		{0xA0, 0xA4, 0xA8},
+		{0xA2, 0xA6, 0xAA},
+	},
+};
+
+/*-----------------------------------------------------------------------------
+ *
+ * readSmbusByteData - read a single SPD byte from any offset
+ */
+
+static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
+{
+	unsigned int status;
+	UINT64 limit;
+
+	address |= 1; // set read bit
+
+	outb(0xFF, iobase + 0);                // clear error status
+	outb(0x1F, iobase + 1);                // clear error status
+	outb(offset, iobase + 3);              // offset in eeprom
+	outb(address, iobase + 4);             // slave address and read bit
+	outb(0x48, iobase + 2);                // read byte command
+
+	// time limit to avoid hanging for unexpected error status (should never happen)
+	limit = __rdtsc () + 2000000000 / 10;
+	for (;;)
+	{
+		status = inb(iobase);
+		if (__rdtsc () > limit) break;
+		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
+		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
+		break;
+	}
+
+	buffer [0] = inb(iobase + 5);
+	if (status == 2) status = 0;                      // check for done with no errors
+	return status;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * readSmbusByte - read a single SPD byte from the default offset
+ *                 this function is faster function readSmbusByteData
+ */
+
+static int readSmbusByte (int iobase, int address, char *buffer)
+{
+	unsigned int status;
+	UINT64 limit;
+
+	outb(0xFF, iobase + 0);                // clear error status
+	outb(0x44, iobase + 2);                // read command
+
+	// time limit to avoid hanging for unexpected error status
+	limit = __rdtsc () + 2000000000 / 10;
+	for (;;)
+	{
+		status = inb(iobase);
+		if (__rdtsc () > limit) break;
+		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
+		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
+		break;
+	}
+
+	buffer [0] = inb(iobase + 5);
+	if (status == 2) status = 0;                      // check for done with no errors
+	return status;
+}
+
+/*---------------------------------------------------------------------------
+ *
+ * readspd - Read one or more SPD bytes from a DIMM.
+ *           Start with offset zero and read sequentially.
+ *           Optimization relies on autoincrement to avoid
+ *           sending offset for every byte.
+ *          Reads 128 bytes in 7-8 ms at 400 KHz.
+ */
+
+static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
+{
+	int index, error;
+
+	/* read the first byte using offset zero */
+	error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
+	if (error) {
+		return error;
+	}
+
+	/* read the remaining bytes using auto-increment for speed */
+	for (index = 1; index < count; index++)
+	{
+		error = readSmbusByte (iobase, SmbusSlaveAddress, buffer + index);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
+static void setupFch (int ioBase)
+{
+	outb(66000000 / 400000 / 4, ioBase + 0x0E); /* set SMBus clock to 400 KHz */
+}
+
+AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info)
+{
+	AGESA_STATUS status;
+	int spdAddress, ioBase;
+	u8 i2c_channel;
+	u8 backup;
+	device_t sm_dev;
+
+	if (info->SocketId     >= DIMENSION (spdAddressLookup      )) return AGESA_ERROR;
+	if (info->MemChannelId >= DIMENSION (spdAddressLookup[0]   )) return AGESA_ERROR;
+	if (info->DimmId       >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR;
+	i2c_channel = (UINT8) info->SocketId;
+
+	/* set IDTQS3253 i2c channel
+	 * GPIO49,48 control the S1,S0
+	 *  S1 S0 true table
+	 *   0  0   channel 0
+	 *   0  1   channel 1
+	 *   1  0   channel 2   -  Socket 0
+	 *   1  1   channel 3   -  Socket 1
+	 * Note: Above is abstracted from Schemetic. But actually it seems to be other way.
+	 *   1  0   channel 2   -  Socket 1
+	 *   1  1   channel 3   -  Socket 0
+	 * Note: The DIMMs need to be plugged in from the farthest slot for each channel.
+	 */
+	backup = sp5100_set_gpio(SP5100_GPIO49_52, 0x1, 0x1);
+	sp5100_set_gpio(SP5100_GPIO37_46_47_48, (~i2c_channel & 1) << 3, 0x1 << 3);
+
+	spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId];
+	if (spdAddress == 0)
+		return AGESA_ERROR;
+
+	/*
+	 * SMBus Base Address was set during southbridge early setup.
+	 * e.g. sb700 IO mapped SMBUS_IO_BASE 0x6000, CIMX using 0xB00 as default
+	 */
+	sm_dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB700_SM), 0);
+	ioBase = pci_read_config32(sm_dev, 0x90) & (0xFFFFFFF0);
+	setupFch(ioBase);
+
+	status = readspd(ioBase, spdAddress, (void *)info->Buffer, 256);
+	sp5100_restore_gpio(SP5100_GPIO49_52, backup);
+
+	return status;
+}
diff --git a/src/mainboard/tyan/s8226/dsdt.asl b/src/mainboard/tyan/s8226/dsdt.asl
new file mode 100644
index 0000000..f26359f
--- /dev/null
+++ b/src/mainboard/tyan/s8226/dsdt.asl
@@ -0,0 +1,1794 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+	"DSDT.AML",	/* Output filename */
+	"DSDT",		/* Signature */
+	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
+	"AMD   ",	/* OEMID */
+	"S8226   ",	/* TABLE ID */
+	0x00010001	/* OEM Revision */
+	)
+{	/* Start of ASL file */
+	/* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
+
+	/* Data to be patched by the BIOS during POST */
+	/* FIXME the patching is not done yet! */
+	/* Memory related values */
+	Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
+	Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+	Name(PBLN, 0x0)	/* Length of BIOS area */
+
+	Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS)	/* Base address of PCIe config space */
+	Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+
+	Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+	Name(SSFG, 0x0D)	/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+	/* USB overcurrent mapping pins.   */
+	Name(UOM0, 0)
+	Name(UOM1, 2)
+	Name(UOM2, 0)
+	Name(UOM3, 7)
+	Name(UOM4, 2)
+	Name(UOM5, 2)
+	Name(UOM6, 6)
+	Name(UOM7, 2)
+	Name(UOM8, 6)
+	Name(UOM9, 6)
+
+	/* Some global data */
+	Name(OSTP, 3)		/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+	Name(OSV, Ones)	/* Assume nothing */
+	Name(PMOD, One)	/* Assume APIC */
+
+	/*
+	 * Processor Object
+	 *
+	 */
+	Scope (\_PR) {		/* define processor scope */
+		Processor(
+			C000,		/* name space name */
+			0x00,		/* Unique number for this processor */
+			0x810,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+			//#include "acpi/cpstate.asl"
+		}
+		Processor(C001, 0x01, 0x00000000, 0x00) {}
+		Processor(C002, 0x02, 0x00000000, 0x00) {}
+		Processor(C003, 0x03, 0x00000000, 0x00) {}
+		Processor(C004, 0x04, 0x00000000, 0x00) {}
+		Processor(C005, 0x05, 0x00000000, 0x00) {}
+		Processor(C006, 0x06, 0x00000000, 0x00) {}
+		Processor(C007, 0x07, 0x00000000, 0x00) {}
+		Processor(C008, 0x08, 0x00000000, 0x00) {}
+		Processor(C009, 0x09, 0x00000000, 0x00) {}
+		Processor(C00A, 0x0A, 0x00000000, 0x00) {}
+		Processor(C00B, 0x0B, 0x00000000, 0x00) {}
+		Processor(C00C, 0x0C, 0x00000000, 0x00) {}
+		Processor(C00D, 0x0D, 0x00000000, 0x00) {}
+		Processor(C00E, 0x0E, 0x00000000, 0x00) {}
+		Processor(C00F, 0x0F, 0x00000000, 0x00) {}
+		Processor(C010, 0x10, 0x00000000, 0x00) {}
+		Processor(C011, 0x11, 0x00000000, 0x00) {}
+		Processor(C012, 0x12, 0x00000000, 0x00) {}
+		Processor(C013, 0x13, 0x00000000, 0x00) {}
+		Processor(C014, 0x14, 0x00000000, 0x00) {}
+		Processor(C015, 0x15, 0x00000000, 0x00) {}
+		Processor(C016, 0x16, 0x00000000, 0x00) {}
+		Processor(C017, 0x17, 0x00000000, 0x00) {}
+		Processor(C018, 0x18, 0x00000000, 0x00) {}
+		Processor(C019, 0x19, 0x00000000, 0x00) {}
+		Processor(C01A, 0x1A, 0x00000000, 0x00) {}
+		Processor(C01B, 0x1B, 0x00000000, 0x00) {}
+		Processor(C01C, 0x1C, 0x00000000, 0x00) {}
+		Processor(C01D, 0x1D, 0x00000000, 0x00) {}
+		Processor(C01E, 0x1E, 0x00000000, 0x00) {}
+		Processor(C01F, 0x1F, 0x00000000, 0x00) {}
+		Processor(C020, 0x20, 0x00000000, 0x00) {}
+		Processor(C021, 0x21, 0x00000000, 0x00) {}
+		Processor(C022, 0x22, 0x00000000, 0x00) {}
+		Processor(C023, 0x23, 0x00000000, 0x00) {}
+		Processor(C024, 0x24, 0x00000000, 0x00) {}
+		Processor(C025, 0x25, 0x00000000, 0x00) {}
+		Processor(C026, 0x26, 0x00000000, 0x00) {}
+		Processor(C027, 0x27, 0x00000000, 0x00) {}
+		Processor(C028, 0x28, 0x00000000, 0x00) {}
+		Processor(C029, 0x29, 0x00000000, 0x00) {}
+		Processor(C02A, 0x2A, 0x00000000, 0x00) {}
+		Processor(C02B, 0x2B, 0x00000000, 0x00) {}
+		Processor(C02C, 0x2C, 0x00000000, 0x00) {}
+		Processor(C02D, 0x2D, 0x00000000, 0x00) {}
+		Processor(C02E, 0x2E, 0x00000000, 0x00) {}
+		Processor(C02F, 0x2F, 0x00000000, 0x00) {}
+		Alias (C000, CPU0)
+		Alias (C001, CPU1)
+		Alias (C002, CPU2)
+		Alias (C003, CPU3)
+		Alias (C004, CPU4)
+		Alias (C005, CPU5)
+		Alias (C006, CPU6)
+		Alias (C007, CPU7)
+		Alias (C008, CPU8)
+	} /* End _PR scope */
+
+	/* PIC IRQ mapping registers, C00h-C01h */
+	OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+		Field(PRQM, ByteAcc, NoLock, Preserve) {
+		PRQI, 0x00000008,
+		PRQD, 0x00000008,  /* Offset: 1h */
+	}
+	IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+		PINA, 0x00000008,	/* Index 0 */
+		PINB, 0x00000008,	/* Index 1 */
+		PINC, 0x00000008,	/* Index 2 */
+		PIND, 0x00000008,	/* Index 3 */
+		AINT, 0x00000008,	/* Index 4 */
+		SINT, 0x00000008,	/* Index 5 */
+		    , 0x00000008,	/* Index 6 */
+		AAUD, 0x00000008,	/* Index 7 */
+		AMOD, 0x00000008,	/* Index 8 */
+		PINE, 0x00000008,	/* Index 9 */
+		PINF, 0x00000008,	/* Index A */
+		PING, 0x00000008,	/* Index B */
+		PINH, 0x00000008,	/* Index C */
+	}
+
+	/* PCI Error control register */
+	OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
+		Field(PERC, ByteAcc, NoLock, Preserve) {
+		SENS, 0x00000001,
+		PENS, 0x00000001,
+		SENE, 0x00000001,
+		PENE, 0x00000001,
+	}
+
+	/* Client Management index/data registers */
+	OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
+		Field(CMT, ByteAcc, NoLock, Preserve) {
+		CMTI, 8,
+		/* Client Management Data register */
+		G64E, 1,
+		G64O, 1,
+		G32O, 2,
+		    , 2,
+		GPSL, 2,
+	}
+
+	/* GPM Port register */
+	OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
+		Field(GPT, ByteAcc, NoLock, Preserve) {
+		GPB0,1,
+		GPB1,1,
+		GPB2,1,
+		GPB3,1,
+		GPB4,1,
+		GPB5,1,
+		GPB6,1,
+		GPB7,1,
+	}
+
+	/* Flash ROM program enable register */
+	OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
+		Field(FRE, ByteAcc, NoLock, Preserve) {
+		    , 0x00000006,
+		FLRE, 0x00000001,
+	}
+
+	/* PM2 index/data registers */
+	OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
+		Field(PM2R, ByteAcc, NoLock, Preserve) {
+		PM2I, 0x00000008,
+		PM2D, 0x00000008,
+	}
+
+	/* Power Management I/O registers */
+	OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+		Field(PIOR, ByteAcc, NoLock, Preserve) {
+		PIOI, 0x00000008,
+		PIOD, 0x00000008,
+	}
+	IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+		Offset(0x00),	/* MiscControl */
+		, 1,
+		T1EE, 1,
+		T2EE, 1,
+		Offset(0x01),	/* MiscStatus */
+		, 1,
+		T1E, 1,
+		T2E, 1,
+		Offset(0x04),	/* SmiWakeUpEventEnable3 */
+		, 7,
+		SSEN, 1,
+		Offset(0x07),	/* SmiWakeUpEventStatus3 */
+		, 7,
+		CSSM, 1,
+		Offset(0x10),	/* AcpiEnable */
+		, 6,
+		PWDE, 1,
+		Offset(0x1C),	/* ProgramIoEnable */
+		, 3,
+		MKME, 1,
+		IO3E, 1,
+		IO2E, 1,
+		IO1E, 1,
+		IO0E, 1,
+		Offset(0x1D),	/* IOMonitorStatus */
+		, 3,
+		MKMS, 1,
+		IO3S, 1,
+		IO2S, 1,
+		IO1S, 1,
+		IO0S,1,
+		Offset(0x20),	/* AcpiPmEvtBlk */
+		APEB, 16,
+		Offset(0x36),	/* GEvtLevelConfig */
+		, 6,
+		ELC6, 1,
+		ELC7, 1,
+		Offset(0x37),	/* GPMLevelConfig0 */
+		, 3,
+		PLC0, 1,
+		PLC1, 1,
+		PLC2, 1,
+		PLC3, 1,
+		PLC8, 1,
+		Offset(0x38),	/* GPMLevelConfig1 */
+		, 1,
+		 PLC4, 1,
+		 PLC5, 1,
+		, 1,
+		 PLC6, 1,
+		 PLC7, 1,
+		Offset(0x3B),	/* PMEStatus1 */
+		GP0S, 1,
+		GM4S, 1,
+		GM5S, 1,
+		APS, 1,
+		GM6S, 1,
+		GM7S, 1,
+		GP2S, 1,
+		STSS, 1,
+		Offset(0x55),	/* SoftPciRst */
+		SPRE, 1,
+		, 1,
+		, 1,
+		PNAT, 1,
+		PWMK, 1,
+		PWNS, 1,
+
+		/* 	Offset(0x61), */	/*  Options_1 */
+		/* 		,7,  */
+		/* 		R617,1, */
+
+		Offset(0x65),	/* UsbPMControl */
+		, 4,
+		URRE, 1,
+		Offset(0x68),	/* MiscEnable68 */
+		, 3,
+		TMTE, 1,
+		, 1,
+		Offset(0x92),	/* GEVENTIN */
+		, 7,
+		E7IS, 1,
+		Offset(0x96),	/* GPM98IN */
+		G8IS, 1,
+		G9IS, 1,
+		Offset(0x9A),	/* EnhanceControl */
+		,7,
+		HPDE, 1,
+		Offset(0xA8),	/* PIO7654Enable */
+		IO4E, 1,
+		IO5E, 1,
+		IO6E, 1,
+		IO7E, 1,
+		Offset(0xA9),	/* PIO7654Status */
+		IO4S, 1,
+		IO5S, 1,
+		IO6S, 1,
+		IO7S, 1,
+	}
+
+	/* PM1 Event Block
+	* First word is PM1_Status, Second word is PM1_Enable
+	*/
+	OperationRegion(P1EB, SystemIO, APEB, 0x04)
+		Field(P1EB, ByteAcc, NoLock, Preserve) {
+		TMST, 1,
+		,    3,
+		BMST,    1,
+		GBST,   1,
+		Offset(0x01),
+		PBST, 1,
+		, 1,
+		RTST, 1,
+		, 3,
+		PWST, 1,
+		SPWS, 1,
+		Offset(0x02),
+		TMEN, 1,
+		, 4,
+		GBEN, 1,
+		Offset(0x03),
+		PBEN, 1,
+		, 1,
+		RTEN, 1,
+		, 3,
+		PWDA, 1,
+	}
+
+	OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100)
+		Field (GRAM, ByteAcc, Lock, Preserve)
+		{
+			Offset (0x10),
+			FLG0,   8
+		}
+
+	Scope(\_SB) {
+		/* PCIe Configuration Space for CONFIG_MMCONF_BUS_NUMBER busses */
+		OperationRegion(PCFG, SystemMemory, PCBA, PCLN)
+			Field(PCFG, ByteAcc, NoLock, Preserve) {
+			/* Byte offsets are computed using the following technique:
+			 * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
+			 * The 8 comes from 8 functions per device, and 4096 bytes per function config space
+			*/
+			Offset(0x00088024),	/* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
+			STB5, 32,
+			Offset(0x00098042),	/* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
+			PT0D, 1,
+			PT1D, 1,
+			PT2D, 1,
+			PT3D, 1,
+			PT4D, 1,
+			PT5D, 1,
+			PT6D, 1,
+			PT7D, 1,
+			PT8D, 1,
+			PT9D, 1,
+			Offset(0x000A0004),	/* Byte offset to SMBUS	register 4h - Bus 0, Device 20, Function 0 */
+			SBIE, 1,
+			SBME, 1,
+			Offset(0x000A0008),	/* Byte offset to SMBUS	register 8h - Bus 0, Device 20, Function 0 */
+			SBRI, 8,
+			Offset(0x000A0014),	/* Byte offset to SMBUS	register 14h - Bus 0, Device 20, Function 0 */
+			SBB1, 32,
+			Offset(0x000A0078),	/* Byte offset to SMBUS	register 78h - Bus 0, Device 20, Function 0 */
+			,14,
+			P92E, 1,		/* Port92 decode enable */
+		}
+
+		OperationRegion(SB5, SystemMemory, STB5, 0x1000)
+			Field(SB5, AnyAcc, NoLock, Preserve){
+			/* Port 0 */
+			Offset(0x120),		/* Port 0 Task file status */
+			P0ER, 1,
+			, 2,
+			P0DQ, 1,
+			, 3,
+			P0BY, 1,
+			Offset(0x128),		/* Port 0 Serial ATA status */
+			P0DD, 4,
+			, 4,
+			P0IS, 4,
+			Offset(0x12C),		/* Port 0 Serial ATA control */
+			P0DI, 4,
+			Offset(0x130),		/* Port 0 Serial ATA error */
+			, 16,
+			P0PR, 1,
+
+			/* Port 1 */
+			offset(0x1A0),		/* Port 1 Task file status */
+			P1ER, 1,
+			, 2,
+			P1DQ, 1,
+			, 3,
+			P1BY, 1,
+			Offset(0x1A8),		/* Port 1 Serial ATA status */
+			P1DD, 4,
+			, 4,
+			P1IS, 4,
+			Offset(0x1AC),		/* Port 1 Serial ATA control */
+			P1DI, 4,
+			Offset(0x1B0),		/* Port 1 Serial ATA error */
+			, 16,
+			P1PR, 1,
+
+			/* Port 2 */
+			Offset(0x220),		/* Port 2 Task file status */
+			P2ER, 1,
+			, 2,
+			P2DQ, 1,
+			, 3,
+			P2BY, 1,
+			Offset(0x228),		/* Port 2 Serial ATA status */
+			P2DD, 4,
+			, 4,
+			P2IS, 4,
+			Offset(0x22C),		/* Port 2 Serial ATA control */
+			P2DI, 4,
+			Offset(0x230),		/* Port 2 Serial ATA error */
+			, 16,
+			P2PR, 1,
+
+			/* Port 3 */
+			Offset(0x2A0),		/* Port 3 Task file status */
+			P3ER, 1,
+			, 2,
+			P3DQ, 1,
+			, 3,
+			P3BY, 1,
+			Offset(0x2A8),		/* Port 3 Serial ATA status */
+			P3DD, 4,
+			, 4,
+			P3IS, 4,
+			Offset(0x2AC),		/* Port 3 Serial ATA control */
+			P3DI, 4,
+			Offset(0x2B0),		/* Port 3 Serial ATA error */
+			, 16,
+			P3PR, 1,
+		}
+	}
+
+	#include "acpi/routing.asl"
+
+	Scope(\_SB) {
+		Method(CkOT, 0){
+			if(LNotEqual(OSTP, Ones)) {Return(OSTP)}	/* OS version was already detected */
+			if(CondRefOf(\_OSI,Local1))
+			{
+				Store(1, OSTP)			/* Assume some form of XP */
+				if (\_OSI("Windows 2006"))      /* Vista */
+				{
+					Store(2, OSTP)
+				}
+			} else {
+				If(WCMP(\_OS,"Linux")) {
+					Store(3, OSTP)		/* Linux */
+				} Else {
+					Store(4, OSTP)		/* Gotta be WinCE */
+				}
+			}
+			Return(OSTP)
+		}
+
+		Method(_PIC, 0x01, NotSerialized)
+		{
+			If (Arg0)
+			{
+				\_SB.CIRQ()
+			}
+			Store(Arg0, PMOD)
+		}
+		Method(CIRQ, 0x00, NotSerialized){
+			Store(0, PINA)
+			Store(0, PINB)
+			Store(0, PINC)
+			Store(0, PIND)
+			Store(0, PINE)
+			Store(0, PINF)
+			Store(0, PING)
+			Store(0, PINH)
+		}
+
+		Name(IRQB, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Shared){15}
+		})
+
+		Name(IRQP, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
+		})
+
+		Name(PITF, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){9}
+		})
+
+		Device(INTA) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 1)
+
+			Method(_STA, 0) {
+				if (PINA) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTA._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_DIS\n") */
+				Store(0, PINA)
+			} /* End Method(_SB.INTA._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTA._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINA, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTA._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINA)
+			} /* End Method(_SB.INTA._SRS) */
+		} /* End Device(INTA) */
+
+		Device(INTB) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 2)
+
+			Method(_STA, 0) {
+				if (PINB) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTB._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_DIS\n") */
+				Store(0, PINB)
+			} /* End Method(_SB.INTB._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTB._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINB, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTB._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINB)
+			} /* End Method(_SB.INTB._SRS) */
+		} /* End Device(INTB)  */
+
+		Device(INTC) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 3)
+
+			Method(_STA, 0) {
+				if (PINC) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTC._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_DIS\n") */
+				Store(0, PINC)
+			} /* End Method(_SB.INTC._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTC._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINC, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTC._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINC)
+			} /* End Method(_SB.INTC._SRS) */
+		} /* End Device(INTC)  */
+
+		Device(INTD) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 4)
+
+			Method(_STA, 0) {
+				if (PIND) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTD._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_DIS\n") */
+				Store(0, PIND)
+			} /* End Method(_SB.INTD._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTD._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIND, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTD._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIND)
+			} /* End Method(_SB.INTD._SRS) */
+		} /* End Device(INTD)  */
+
+		Device(INTE) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 5)
+
+			Method(_STA, 0) {
+				if (PINE) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTE._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_DIS\n") */
+				Store(0, PINE)
+			} /* End Method(_SB.INTE._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTE._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINE, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTE._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINE)
+			} /* End Method(_SB.INTE._SRS) */
+		} /* End Device(INTE)  */
+
+		Device(INTF) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 6)
+
+			Method(_STA, 0) {
+				if (PINF) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTF._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_DIS\n") */
+				Store(0, PINF)
+			} /* End Method(_SB.INTF._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_PRS\n") */
+				Return(PITF)
+			} /* Method(_SB.INTF._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINF, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTF._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINF)
+			} /*  End Method(_SB.INTF._SRS) */
+		} /* End Device(INTF)  */
+
+		Device(INTG) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 7)
+
+			Method(_STA, 0) {
+				if (PING) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTG._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_DIS\n") */
+				Store(0, PING)
+			} /* End Method(_SB.INTG._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PING, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PING)
+			} /* End Method(_SB.INTG._SRS)  */
+		} /* End Device(INTG)  */
+
+		Device(INTH) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 8)
+
+			Method(_STA, 0) {
+				if (PINH) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTH._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_DIS\n") */
+				Store(0, PINH)
+			} /* End Method(_SB.INTH._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINH, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINH)
+			} /* End Method(_SB.INTH._SRS)  */
+		} /* End Device(INTH)   */
+
+	}   /* End Scope(_SB)  */
+
+
+	/* Supported sleep states: */
+	Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} )	/* (S0) - working state */
+
+	If (LAnd(SSFG, 0x01)) {
+		Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} )	/* (S1) - sleeping w/CPU context */
+	}
+	If (LAnd(SSFG, 0x02)) {
+		Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} )	/* (S2) - "light" Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x04)) {
+		Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} )	/* (S3) - Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x08)) {
+		Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} )	/* (S4) - Suspend to Disk */
+	}
+
+	Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} )	/* (S5) - Soft Off */
+
+	Name(\_SB.CSPS ,0)				/* Current Sleep State (S0, S1, S2, S3, S4, S5) */
+	Name(CSMS, 0)			/* Current System State */
+
+	/* Wake status package */
+	Name(WKST,Package(){Zero, Zero})
+
+	/*
+	* \_PTS - Prepare to Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+	*
+	* Exit:
+	*		-none-
+	*
+	* The _PTS control method is executed at the beginning of the sleep process
+	* for S1-S5. The sleeping value is passed to the _PTS control method.	This
+	* control method may be executed a relatively long time before entering the
+	* sleep state and the OS may abort	the operation without notification to
+	* the ACPI driver.  This method cannot modify the configuration or power
+	* state of any device in the system.
+	*/
+	Method(\_PTS, 1) {
+		/* DBGO("\\_PTS\n") */
+		/* DBGO("From S0 to S") */
+		/* DBGO(Arg0) */
+		/* DBGO("\n") */
+
+		/* Don't allow PCIRST# to reset USB */
+		if (LEqual(Arg0,3)){
+			Store(0,URRE)
+		}
+
+		/* Clear sleep SMI status flag and enable sleep SMI trap. */
+		/*Store(One, CSSM)
+		Store(One, SSEN)*/
+
+		/* On older chips, clear PciExpWakeDisEn */
+		/*if (LLessEqual(\_SB.SBRI, 0x13)) {
+		*    	Store(0,\_SB.PWDE)
+		*}
+		*/
+
+		/* Clear wake status structure. */
+		Store(0, Index(WKST,0))
+		Store(0, Index(WKST,1))
+		\_SB.PCI0.SIOS (Arg0)
+	} /* End Method(\_PTS) */
+
+	/*
+	*  The following method results in a "not a valid reserved NameSeg"
+	*  warning so I have commented it out for the duration.  It isn't
+	*  used, so it could be removed.
+	*
+	*
+	*  	\_GTS OEM Going To Sleep method
+	*
+	*  	Entry:
+	*  		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*  	Exit:
+	*  		-none-
+	*
+	*  Method(\_GTS, 1) {
+	*  DBGO("\\_GTS\n")
+	*  DBGO("From S0 to S")
+	*  DBGO(Arg0)
+	*  DBGO("\n")
+	*  }
+	*/
+
+	/*
+	*	\_BFS OEM Back From Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		-none-
+	*/
+	Method(\_BFS, 1) {
+		/* DBGO("\\_BFS\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+	}
+
+	/*
+	*  \_WAK System Wake method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		Return package of 2 DWords
+	*		Dword 1 - Status
+	*			0x00000000	wake succeeded
+	*			0x00000001	Wake was signaled but failed due to lack of power
+	*			0x00000002	Wake was signaled but failed due to thermal condition
+	*		Dword 2 - Power Supply state
+	*			if non-zero the effective S-state the power supply entered
+	*/
+	Method(\_WAK, 1) {
+		/* DBGO("\\_WAK\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+
+		/* Re-enable HPET */
+		Store(1,HPDE)
+
+		/* Restore PCIRST# so it resets USB */
+		if (LEqual(Arg0,3)){
+			Store(1,URRE)
+		}
+
+		/* Arbitrarily clear PciExpWakeStatus */
+		Store(PWST, PWST)
+
+		/* if(DeRefOf(Index(WKST,0))) {
+		*	Store(0, Index(WKST,1))
+		* } else {
+		*	Store(Arg0, Index(WKST,1))
+		* }
+		*/
+		\_SB.PCI0.SIOW (Arg0)
+		Return(WKST)
+	} /* End Method(\_WAK) */
+
+	Scope(\_GPE) {	/* Start Scope GPE */
+		/*  General event 0  */
+		Method(_L00) {
+		      //DBGO("\\_GPE\\_L00\n")
+		}
+
+		/*  General event 1  */
+		Method(_L01) {
+		      //DBGO("\\_GPE\\_L01\n")
+		}
+
+		/*  General event 2  */
+		Method(_L02) {
+		      //DBGO("\\_GPE\\_L02\n")
+		}
+
+		/*  General event 3  */
+		Method(_L03) {
+			//DBGO("\\_GPE\\_L00\n")
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  General event 4  */
+		Method(_L04) {
+		      //DBGO("\\_GPE\\_L04\n")
+		}
+
+		/*  General event 5  */
+		Method(_L05) {
+		      //DBGO("\\_GPE\\_L05\n")
+		}
+
+		/* _L06 General event 6 - Used for GPM6, moved to USB.asl */
+		/* _L07 General event 7 - Used for GPM7, moved to USB.asl */
+
+		/*  Legacy PM event  */
+		Method(_L08) {
+			//DBGO("\\_GPE\\_L08\n")
+		}
+
+		/*  Temp warning (TWarn) event  */
+		Method(_L09) {
+			//DBGO("\\_GPE\\_L09\n")
+			Notify (\_TZ.TZ00, 0x80)
+		}
+
+		/*  Reserved  */
+		Method(_L0A) {
+		      //DBGO("\\_GPE\\_L0A\n")
+		}
+
+		/*  USB controller PME#  */
+		Method(_L0B) {
+			//DBGO("\\_GPE\\_L0B\n")
+			Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  AC97 controller PME#  */
+		Method(_L0C) {
+		      //DBGO("\\_GPE\\_L0C\n")
+		}
+
+		/*  OtherTherm PME#  */
+		Method(_L0D) {
+		      //DBGO("\\_GPE\\_L0D\n")
+		}
+
+		/* _L0E GPM9 SCI event - Moved to USB.asl */
+
+		/*  PCIe HotPlug event  */
+		Method(_L0F) {
+			//DBGO("\\_GPE\\_L0F\n")
+		}
+
+		/*  ExtEvent0 SCI event  */
+		Method(_L10) {
+			//DBGO("\\_GPE\\_L10\n")
+		}
+
+
+		/*  ExtEvent1 SCI event  */
+		Method(_L11) {
+			//DBGO("\\_GPE\\_L11\n")
+		}
+
+		/*  PCIe PME# event  */
+		Method(_L12) {
+		      //DBGO("\\_GPE\\_L12\n")
+		}
+
+		/* _L13 GPM0 SCI event - Moved to USB.asl */
+		/* _L14 GPM1 SCI event - Moved to USB.asl */
+		/* _L15 GPM2 SCI event - Moved to USB.asl */
+		/* _L16 GPM3 SCI event - Moved to USB.asl */
+		/* _L17 GPM8 SCI event - Moved to USB.asl */
+
+		/*  GPIO0 or GEvent8 event  */
+		Method(_L18) {
+			//DBGO("\\_GPE\\_L18\n")
+			Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBRb, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBRc, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBRd, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/* _L19 GPM4 SCI event - Moved to USB.asl */
+		/* _L1A GPM5 SCI event - Moved to USB.asl */
+
+		/*  Azalia SCI event  */
+		Method(_L1B) {
+			//DBGO("\\_GPE\\_L1B\n")
+			Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  GPM6 SCI event - Reassigned to _L06 */
+		Method(_L1C) {
+		      //DBGO("\\_GPE\\_L1C\n")
+		}
+
+		/*  GPM7 SCI event - Reassigned to _L07 */
+		Method(_L1D) {
+		      //DBGO("\\_GPE\\_L1D\n")
+		}
+
+		/*  GPIO2 or GPIO66 SCI event  */
+		Method(_L1E) {
+			//DBGO("\\_GPE\\_L1E\n")
+		}
+
+		/* _L1F SATA SCI event - Moved to sata.asl */
+
+	} 	/* End Scope GPE */
+
+	#include "acpi/usb.asl"
+
+	/* System Bus */
+	Scope(\_SB) { /* Start \_SB scope */
+		#include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */
+
+		/*  _SB.PCI0 */
+		/* Note: Only need HID on Primary Bus */
+		Device(PCI0) {
+			External (TOM1) //assigned when update_ssdt()
+			External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */
+
+			Name(_HID, EISAID("PNP0A03"))
+			Name(_ADR, 0x00180000)	/* Dev# = BSP Dev#, Func# = 0 */
+			Method(_BBN, 0) { /* Bus number = 0 */
+				Return(0)
+			}
+			Method(_STA, 0) {
+				/* DBGO("\\_SB\\PCI0\\_STA\n") */
+				Return(0x0B)     /* Status is visible */
+			}
+
+			Method(_PRT,0) {
+				If(PMOD){ Return(APR0) }	/* APIC mode */
+				Return (PR0)			/* PIC Mode */
+			} /* end _PRT */
+
+			/* Describe the Northbridge devices */
+			Device(AMRT) {
+				Name(_ADR, 0x00000000)
+			} /* end AMRT */
+
+			/* The external GFX bridge */
+			Device(PBR2) {
+				Name(_ADR, 0x00020000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS2) }	/* APIC mode */
+					Return (PS2)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR2 */
+
+			/* Dev3 is also an external GFX bridge */
+
+			Device(PBR4) {
+				Name(_ADR, 0x00040000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS4) }	/* APIC mode */
+					Return (PS4)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR4 */
+
+			Device(PBRb) {
+				Name(_ADR, 0x000b0000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APSb) }	/* APIC mode */
+					Return (PSb)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBRb */
+
+			Device(PBRc) {
+				Name(_ADR, 0x000c0000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APSc) }	/* APIC mode */
+					Return (PSc)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBRc */
+
+			Device(PBRd) {
+				Name(_ADR, 0x000d0000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APSd) }	/* APIC mode */
+					Return (PSd)			/*  PIC Mode */
+				} /* end _PRT */
+			} /* end PBRd */
+
+			/* Describe the Southbridge devices */
+			Device(STCR) {
+				Name(_ADR, 0x00110000)
+				#include "acpi/sata.asl"
+			} /* end STCR */
+
+			Device(UOH1) {
+				Name(_ADR, 0x00130000)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH1 */
+
+			Device(UOH2) {
+				Name(_ADR, 0x00130001)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH2 */
+
+			Device(UOH3) {
+				Name(_ADR, 0x00130002)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH3 */
+
+			Device(UOH4) {
+				Name(_ADR, 0x00130003)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH4 */
+
+			Device(UOH5) {
+				Name(_ADR, 0x00130004)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH5 */
+
+			Device(UEH1) {
+				Name(_ADR, 0x00130005)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UEH1 */
+
+			Device(SBUS) {
+				Name(_ADR, 0x00140000)
+			} /* end SBUS */
+
+			/* Primary (and only) IDE channel */
+			Device(IDEC) {
+				Name(_ADR, 0x00140001)
+				#include "acpi/ide.asl"
+			} /* end IDEC */
+
+			Device(AZHD) {
+				Name(_ADR, 0x00140002)
+				OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
+					Field(AZPD, AnyAcc, NoLock, Preserve) {
+					offset (0x42),
+					NSDI, 1,
+					NSDO, 1,
+					NSEN, 1,
+					offset (0x44),
+					IPCR, 4,
+					offset (0x54),
+					PWST, 2,
+					, 6,
+					PMEB, 1,
+					, 6,
+					PMST, 1,
+					offset (0x62),
+					MMCR, 1,
+					offset (0x64),
+					MMLA, 32,
+					offset (0x68),
+					MMHA, 32,
+					offset (0x6C),
+					MMDT, 16,
+				}
+
+				Method(_INI) {
+					If(LEqual(OSTP,3)){   /* If we are running Linux */
+						Store(zero, NSEN)
+						Store(one, NSDO)
+						Store(one, NSDI)
+					}
+				}
+			} /* end AZHD */
+
+			Device(LIBR) {
+				Name(_ADR, 0x00140003)
+				/* Method(_INI) {
+				*	DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
+				} */ /* End Method(_SB.SBRDG._INI) */
+
+				/* Real Time Clock Device */
+				Device(RTC0) {
+					Name(_HID, EISAID("PNP0B00"))	/* AT Real Time Clock (not PIIX4 compatible) */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){8}
+						IO(Decode16,0x0070, 0x0070, 0, 2)
+						/* IO(Decode16,0x0070, 0x0070, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
+
+				Device(TMR) {	/* Timer */
+					Name(_HID,EISAID("PNP0100"))	/* System Timer */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){0}
+						IO(Decode16, 0x0040, 0x0040, 0, 4)
+						/* IO(Decode16, 0x0048, 0x0048, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
+
+				Device(SPKR) {	/* Speaker */
+					Name(_HID,EISAID("PNP0800"))	/* AT style speaker */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x0061, 0x0061, 0, 1)
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
+
+				Device(PIC) {
+					Name(_HID,EISAID("PNP0000"))	/* AT Interrupt Controller */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){2}
+						IO(Decode16,0x0020, 0x0020, 0, 2)
+						IO(Decode16,0x00A0, 0x00A0, 0, 2)
+						/* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
+						/* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
+
+				Device(MAD) { /* 8257 DMA */
+					Name(_HID,EISAID("PNP0200"))	/* Hardware Device ID */
+					Name(_CRS, ResourceTemplate() {
+						DMA(Compatibility,BusMaster,Transfer8){4}
+						IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
+						IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
+						IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
+						IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
+						IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
+						IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
+					}) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
+				} /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
+
+				Device(COPR) {
+					Name(_HID,EISAID("PNP0C04"))	/* Math Coprocessor */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
+						IRQNoFlags(){13}
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+
+				Device (PS2M) {
+					Name (_HID, EisaId ("PNP0F13"))
+					Name (_CRS, ResourceTemplate () {
+						IO (Decode16, 0x0060, 0x0060, 0x00, 0x01)
+						IO (Decode16, 0x0064, 0x0064, 0x00, 0x01)
+						IRQNoFlags () {12}
+					})
+					Method (_STA, 0, NotSerialized) {
+						And (FLG0, 0x04, Local0)
+						If (LEqual (Local0, 0x04)) {
+							Return (0x0F)
+						} Else {
+							Return (0x00)
+						}
+					}
+				}
+
+				Device (PS2K) {
+					Name (_HID, EisaId ("PNP0303"))
+					Method (_STA, 0, NotSerialized) {
+						And (FLG0, 0x04, Local0)
+						If (LEqual (Local0, 0x04)) {
+							Return (0x0F)
+						} Else {
+							Return (0x00)
+						}
+					}
+					Name (_CRS, ResourceTemplate () {
+						IO (Decode16, 0x0060, 0x0060, 0x00, 0x01)
+						IO (Decode16, 0x0064, 0x0064, 0x00, 0x01)
+						IRQNoFlags () {1}
+					})
+				}
+
+#if 0 //acpi_create_hpet
+				Device(HPET) {
+					Name(_HID,EISAID("PNP0103"))
+					Name(CRS, ResourceTemplate() {
+		    				IRQNoFlags () {0}
+		    				IRQNoFlags () {2}
+		   			 	IRQNoFlags () {8}
+						Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, MNT)	/* 1kb reserved space */
+					})
+					Method(_STA, 0, NotSerialized) {
+						Return(0x0F) /* sata is visible */
+					}
+					Method(_CRS, 0, NotSerialized) {
+						CreateDwordField(CRS, ^MNT._BAS, HPT)
+						Store(HPBA, HPT)
+						Return(CRS)
+					}
+				} /* End Device(_SB.PCI0.LIBR.HPET) */
+#endif
+			} /* end LIBR */
+
+			Device(HPBR) {
+				Name(_ADR, 0x00140004)
+			} /* end HostPciBr */
+
+			Device(ACAD) {
+				Name(_ADR, 0x00140005)
+			} /* end Ac97audio */
+
+			Device(ACMD) {
+				Name(_ADR, 0x00140006)
+			} /* end Ac97modem */
+
+			/* ITE8718 Support */
+			OperationRegion (IOID, SystemIO, 0x2E, 0x02)	/* sometimes it is 0x4E */
+				Field (IOID, ByteAcc, NoLock, Preserve)
+				{
+					SIOI,   8,    SIOD,   8		/* 0x2E and 0x2F */
+				}
+
+			IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve)
+			{
+					Offset (0x07),
+				LDN,	8,	/* Logical Device Number */
+					Offset (0x20),
+				CID1,	8,	/* Chip ID Byte 1, 0x87 */
+				CID2,	8,	/* Chip ID Byte 2, 0x12 */
+					Offset (0x30),
+				ACTR,	8,	/* Function activate */
+					Offset (0xF0),
+				APC0,	8,	/* APC/PME Event Enable Register */
+				APC1,	8,	/* APC/PME Status Register */
+				APC2,	8,	/* APC/PME Control Register 1 */
+				APC3,	8,	/* Environment Controller Special Configuration Register */
+				APC4,	8	/* APC/PME Control Register 2 */
+			}
+
+			/* Enter the 8718 MB PnP Mode */
+			Method (EPNP)
+			{
+				Store(0x87, SIOI)
+				Store(0x01, SIOI)
+				Store(0x55, SIOI)
+				Store(0x55, SIOI) /* 8718 magic number */
+			}
+			/* Exit the 8718 MB PnP Mode */
+			Method (XPNP)
+			{
+				Store (0x02, SIOI)
+				Store (0x02, SIOD)
+			}
+			/*
+			 * Keyboard PME is routed to SB700 Gevent3. We can wake
+			 * up the system by pressing the key.
+			 */
+			Method (SIOS, 1)
+			{
+				/* We only enable KBD PME for S5. */
+				If (LLess (Arg0, 0x05))
+				{
+					EPNP()
+					/* DBGO("8718F\n") */
+
+					Store (0x4, LDN)
+					Store (One, ACTR)  /* Enable EC */
+					/*
+					Store (0x4, LDN)
+					Store (0x04, APC4)
+					*/  /* falling edge. which mode? Not sure. */
+
+					Store (0x4, LDN)
+					Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */
+					Store (0x4, LDN)
+					Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */
+
+					XPNP()
+				}
+			}
+			Method (SIOW, 1)
+			{
+				EPNP()
+				Store (0x4, LDN)
+				Store (Zero, APC0) /* disable keyboard PME */
+				Store (0x4, LDN)
+				Store (0xFF, APC1) /* clear keyboard PME status */
+				XPNP()
+			}
+
+			Name (CRS, ResourceTemplate ()
+			{
+				WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+					0x0000,             // Granularity
+					0x0000,             // Range Minimum
+					0x00FF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x0100,             // Length
+					,,)
+				IO (Decode16,
+					0x0CF8,             // Range Minimum
+					0x0CF8,             // Range Maximum
+					0x01,               // Alignment
+					0x08,               // Length
+					)
+
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x0000,             // Range Minimum
+					0x03AF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x03B0,             // Length
+					,, , TypeStatic)
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x03E0,             // Range Minimum
+					0x0CF7,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x0918,             // Length
+					,, , TypeStatic)
+
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x03B0,             // Range Minimum
+					0x03BB,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x000C,             // Length
+					,, , TypeStatic)
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x03C0,             // Range Minimum
+					0x03DF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x0020,             // Length
+					,, , TypeStatic)
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x0D00,             // Range Minimum
+					0xFFFF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0xF300,             // Length
+					,, , TypeStatic)
+				Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) 	// VGA memory space
+
+				Memory32Fixed (ReadOnly,
+						0xE0000000,         // Address Base
+						0x10000000,         // Address Length, (1MB each Bus, 256 Buses by default)
+						MMIO)
+			})
+
+			Method (_CRS, 0, NotSerialized)
+			{
+				CreateDWordField (CRS, \_SB.PCI0.MMIO._BAS, BAS1)
+				CreateDWordField (CRS, \_SB.PCI0.MMIO._LEN, LEN1)
+
+                                /*
+                                 * Declare memory between TOM1 and 4GB as available
+                                 * for PCI MMIO.
+                                 * Use ShiftLeft to avoid 64bit constant (for XP).
+                                 * This will work even if the OS does 32bit arithmetic, as
+                                 * 32bit (0x00000000 - TOM1) will wrap and give the same
+                                 * result as 64bit (0x100000000 - TOM1).
+                                 */
+				Store(TOM1, BAS1)
+                                ShiftLeft(0x10000000, 4, Local0)
+                                Subtract(Local0, TOM1, Local0)
+                                Store(Local0, LEN1)
+				//DBGO(TOM1)
+
+				Return (CRS)
+			}
+
+			/*
+			 *
+			 *               FIRST METHOD CALLED UPON BOOT
+			 *
+			 *  1. If debugging, print current OS and ACPI interpreter.
+			 *  2. Get PCI Interrupt routing from ACPI VSM, this
+			 *     value is based on user choice in BIOS setup.
+			 */
+			Method(_INI, 0) {
+				/* DBGO("\\_SB\\_INI\n") */
+				/* DBGO("   DSDT.ASL code from ") */
+				/* DBGO(__DATE__) */
+				/* DBGO(" ") */
+				/* DBGO(__TIME__) */
+				/* DBGO("\n   Sleep states supported: ") */
+				/* DBGO("\n") */
+				/* DBGO("   \\_OS=") */
+				/* DBGO(\_OS) */
+				/* DBGO("\n   \\_REV=") */
+				/* DBGO(\_REV) */
+				/* DBGO("\n") */
+
+				/* Determine the OS we're running on */
+				CkOT()
+				/* On older chips, clear PciExpWakeDisEn */
+				/*if (LLessEqual(\SBRI, 0x13)) {
+				 *    	Store(0,\PWDE)
+				 *}
+				 */
+			} /* End Method(_SB._INI) */
+		} /* End Device(PCI0)  */
+
+		Device(PWRB) {	/* Start Power button device */
+			Name(_HID, EISAID("PNP0C0C"))
+			Name(_UID, 0xAA)
+			Name(_PRW, Package () {3, 0x04})	/* wake from S1-S4 */
+			Name(_STA, 0x0B) /* sata is invisible */
+		}
+	} /* End \_SB scope */
+
+	Scope(\_SI) {
+		Method(_SST, 1) {
+			/* DBGO("\\_SI\\_SST\n") */
+			/* DBGO("   New Indicator state: ") */
+			/* DBGO(Arg0) */
+			/* DBGO("\n") */
+		}
+	} /* End Scope SI */
+
+	/* SMBUS Support */
+	Mutex (SBX0, 0x00)
+	OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
+		Field (SMB0, ByteAcc, NoLock, Preserve) {
+			HSTS,   8, /* SMBUS status */
+			SSTS,   8,  /* SMBUS slave status */
+			HCNT,   8,  /* SMBUS control */
+			HCMD,   8,  /* SMBUS host cmd */
+			HADD,   8,  /* SMBUS address */
+			DAT0,   8,  /* SMBUS data0 */
+			DAT1,   8,  /* SMBUS data1 */
+			BLKD,   8,  /* SMBUS block data */
+			SCNT,   8,  /* SMBUS slave control */
+			SCMD,   8,  /* SMBUS shaow cmd */
+			SEVT,   8,  /* SMBUS slave event */
+			SDAT,   8  /* SMBUS slave data */
+	}
+
+	Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
+		Store (0x1E, HSTS)
+		Store (0xFA, Local0)
+		While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
+			Stall (0x64)
+			Decrement (Local0)
+		}
+
+		Return (Local0)
+	}
+
+	Method (SWTC, 1, NotSerialized) {
+		Store (Arg0, Local0)
+		Store (0x07, Local2)
+		Store (One, Local1)
+		While (LEqual (Local1, One)) {
+			Store (And (HSTS, 0x1E), Local3)
+			If (LNotEqual (Local3, Zero)) { /* read sucess */
+				If (LEqual (Local3, 0x02)) {
+					Store (Zero, Local2)
+				}
+
+				Store (Zero, Local1)
+			}
+			Else {
+				If (LLess (Local0, 0x0A)) { /* read failure */
+					Store (0x10, Local2)
+					Store (Zero, Local1)
+				}
+				Else {
+					Sleep (0x0A) /* 10 ms, try again */
+					Subtract (Local0, 0x0A, Local0)
+				}
+			}
+		}
+
+		Return (Local2)
+	}
+
+	Method (SMBR, 3, NotSerialized) {
+		Store (0x07, Local0)
+		If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
+			Store (WCLR (), Local0) /* clear SMBUS status register before read data */
+			If (LEqual (Local0, Zero)) {
+				Release (SBX0)
+				Return (0x0)
+			}
+
+			Store (0x1F, HSTS)
+			Store (Or (ShiftLeft (Arg1, One), One), HADD)
+			Store (Arg2, HCMD)
+			If (LEqual (Arg0, 0x07)) {
+				Store (0x48, HCNT) /* read byte */
+			}
+
+			Store (SWTC (0x03E8), Local1) /* 1000 ms */
+			If (LEqual (Local1, Zero)) {
+				If (LEqual (Arg0, 0x07)) {
+					Store (DAT0, Local0)
+				}
+			}
+			Else {
+				Store (Local1, Local0)
+			}
+
+			Release (SBX0)
+		}
+
+		/* DBGO("the value of SMBusData0 register ") */
+		/* DBGO(Arg2) */
+		/* DBGO(" is ") */
+		/* DBGO(Local0) */
+		/* DBGO("\n") */
+
+		Return (Local0)
+	}
+
+	/* THERMAL */
+	Scope(\_TZ) {
+		Name (KELV, 2732)
+		Name (THOT, 800)
+		Name (TCRT, 850)
+
+		ThermalZone(TZ00) {
+			Method(_AC0,0) {	/* Active Cooling 0 (0=highest fan speed) */
+				/* DBGO("\\_TZ\\TZ00\\_AC0\n") */
+				Return(Add(0, 2730))
+			}
+			Method(_AL0,0) {	/* Returns package of cooling device to turn on */
+				/* DBGO("\\_TZ\\TZ00\\_AL0\n") */
+				Return(Package() {\_TZ.TZ00.FAN0})
+			}
+			Device (FAN0) {
+				Name(_HID, EISAID("PNP0C0B"))
+				Name(_PR0, Package() {PFN0})
+			}
+
+			PowerResource(PFN0,0,0) {
+				Method(_STA) {
+					Store(0xF,Local0)
+					Return(Local0)
+				}
+				Method(_ON) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
+				}
+				Method(_OFF) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
+				}
+			}
+
+			Method(_HOT,0) {	/* return hot temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_HOT\n") */
+				Return (Add (THOT, KELV))
+			}
+			Method(_CRT,0) {	/* return critical temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_CRT\n") */
+				Return (Add (TCRT, KELV))
+			}
+			Method(_TMP,0) {	/* return current temp of this zone */
+				Store (SMBR (0x07, 0x4C,, 0x00), Local0)
+				If (LGreater (Local0, 0x10)) {
+					Store (Local0, Local1)
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400, KELV))
+				}
+
+				Store (SMBR (0x07, 0x4C, 0x01), Local0)
+				/* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
+				/* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
+				If (LGreater (Local0, 0x10)) {
+					If (LGreater (Local0, Local1)) {
+						Store (Local0, Local1)
+					}
+
+					Multiply (Local1, 10, Local1)
+					Return (Add (Local1, KELV))
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400 , KELV))
+				}
+			} /* end of _TMP */
+		} /* end of TZ00 */
+	}
+}
+/* End of ASL file */
diff --git a/src/mainboard/tyan/s8226/fadt.c b/src/mainboard/tyan/s8226/fadt.c
new file mode 100644
index 0000000..0c63162
--- /dev/null
+++ b/src/mainboard/tyan/s8226/fadt.c
@@ -0,0 +1,174 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ */
+
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include "Platform.h" /*sb700 platform header*/
+
+#ifndef ACPI_BLK_BASE
+  #define ACPI_BLK_BASE	PM1_EVT_BLK_ADDRESS
+#endif
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+	acpi_header_t *header = &(fadt->header);
+
+	printk(BIOS_DEBUG, "ACPI_BLK_BASE: 0x%04x\n", ACPI_BLK_BASE);
+	/* Prepare the header */
+	memset((void *)fadt, 0, sizeof(acpi_fadt_t));
+	memcpy(header->signature, "FACP", 4);
+	header->length = 244;
+	header->revision = 3;
+	memcpy(header->oem_id, OEM_ID, 6);
+	memcpy(header->oem_table_id, "AMD     ", 8);
+	memcpy(header->asl_compiler_id, ASLC, 4);
+	header->asl_compiler_revision = 0;
+
+	fadt->firmware_ctrl = (u32) facs;
+	fadt->dsdt = (u32) dsdt;
+	/* 3=Workstation,4=Enterprise Server, 7=Performance Server */
+	fadt->preferred_pm_profile = 0x03;
+	fadt->sci_int = 9;
+	/* disable system management mode by setting to 0: */
+	fadt->smi_cmd = 0;
+	fadt->acpi_enable = 0xf0;
+	fadt->acpi_disable = 0xf1;
+	fadt->s4bios_req = 0x0;
+	fadt->pstate_cnt = 0xe2;
+
+	/* RTC_En_En, TMR_En_En, GBL_EN_EN */
+	outl(0x1, PM1_CNT_BLK_ADDRESS);           /* set SCI_EN */
+	fadt->pm1a_evt_blk = PM1_EVT_BLK_ADDRESS;
+	fadt->pm1b_evt_blk = 0x0000;
+	fadt->pm1a_cnt_blk = PM1_CNT_BLK_ADDRESS;
+	fadt->pm1b_cnt_blk = 0x0000;
+	fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK_ADDRESS;
+	fadt->pm_tmr_blk = PM1_TMR_BLK_ADDRESS;
+	fadt->gpe0_blk = GPE0_BLK_ADDRESS;
+	fadt->gpe1_blk = 0x0000;	/* we dont have gpe1 block, do we? */
+
+	fadt->pm1_evt_len = 4;
+	fadt->pm1_cnt_len = 2;
+	fadt->pm2_cnt_len = 1;
+	fadt->pm_tmr_len = 4;
+	fadt->gpe0_blk_len = 8;
+	fadt->gpe1_blk_len = 0;
+	fadt->gpe1_base = 0;
+
+	fadt->cst_cnt = 0xe3;
+	fadt->p_lvl2_lat = 101;
+	fadt->p_lvl3_lat = 1001;
+	fadt->flush_size = 0;
+	fadt->flush_stride = 0;
+	fadt->duty_offset = 1;
+	fadt->duty_width = 3;
+	fadt->day_alrm = 0;	/* 0x7d these have to be */
+	fadt->mon_alrm = 0;	/* 0x7e added to cmos.layout */
+	fadt->century = 0;	/* 0x7f to make rtc alrm work */
+	fadt->iapc_boot_arch = 0x3;	/* See table 5-11 */
+	fadt->flags = 0x0001c1a5;/* 0x25; */
+
+	fadt->res2 = 0;
+
+	fadt->reset_reg.space_id = 1;
+	fadt->reset_reg.bit_width = 8;
+	fadt->reset_reg.bit_offset = 0;
+	fadt->reset_reg.resv = 0;
+	fadt->reset_reg.addrl = 0xcf9;
+	fadt->reset_reg.addrh = 0x0;
+
+	fadt->reset_value = 6;
+	fadt->x_firmware_ctl_l = (u32) facs;
+	fadt->x_firmware_ctl_h = 0;
+	fadt->x_dsdt_l = (u32) dsdt;
+	fadt->x_dsdt_h = 0;
+
+	fadt->x_pm1a_evt_blk.space_id = 1;
+	fadt->x_pm1a_evt_blk.bit_width = 32;
+	fadt->x_pm1a_evt_blk.bit_offset = 0;
+	fadt->x_pm1a_evt_blk.resv = 0;
+	fadt->x_pm1a_evt_blk.addrl = PM1_EVT_BLK_ADDRESS;
+	fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_evt_blk.space_id = 1;
+	fadt->x_pm1b_evt_blk.bit_width = 4;
+	fadt->x_pm1b_evt_blk.bit_offset = 0;
+	fadt->x_pm1b_evt_blk.resv = 0;
+	fadt->x_pm1b_evt_blk.addrl = 0x0;
+	fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+
+	fadt->x_pm1a_cnt_blk.space_id = 1;
+	fadt->x_pm1a_cnt_blk.bit_width = 16;
+	fadt->x_pm1a_cnt_blk.bit_offset = 0;
+	fadt->x_pm1a_cnt_blk.resv = 0;
+	fadt->x_pm1a_cnt_blk.addrl = PM1_CNT_BLK_ADDRESS;
+	fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_cnt_blk.space_id = 1;
+	fadt->x_pm1b_cnt_blk.bit_width = 2;
+	fadt->x_pm1b_cnt_blk.bit_offset = 0;
+	fadt->x_pm1b_cnt_blk.resv = 0;
+	fadt->x_pm1b_cnt_blk.addrl = 0x0;
+	fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+
+	fadt->x_pm2_cnt_blk.space_id = 1;
+	fadt->x_pm2_cnt_blk.bit_width = 0;
+	fadt->x_pm2_cnt_blk.bit_offset = 0;
+	fadt->x_pm2_cnt_blk.resv = 0;
+	fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK_ADDRESS;
+	fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+
+	fadt->x_pm_tmr_blk.space_id = 1;
+	fadt->x_pm_tmr_blk.bit_width = 32;
+	fadt->x_pm_tmr_blk.bit_offset = 0;
+	fadt->x_pm_tmr_blk.resv = 0;
+	fadt->x_pm_tmr_blk.addrl = PM1_TMR_BLK_ADDRESS;
+	fadt->x_pm_tmr_blk.addrh = 0x0;
+
+
+	fadt->x_gpe0_blk.space_id = 1;
+	fadt->x_gpe0_blk.bit_width = 32;
+	fadt->x_gpe0_blk.bit_offset = 0;
+	fadt->x_gpe0_blk.resv = 0;
+	fadt->x_gpe0_blk.addrl = GPE0_BLK_ADDRESS;
+	fadt->x_gpe0_blk.addrh = 0x0;
+
+
+	fadt->x_gpe1_blk.space_id = 1;
+	fadt->x_gpe1_blk.bit_width = 0;
+	fadt->x_gpe1_blk.bit_offset = 0;
+	fadt->x_gpe1_blk.resv = 0;
+	fadt->x_gpe1_blk.addrl = 0;
+	fadt->x_gpe1_blk.addrh = 0x0;
+
+	header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+}
+
diff --git a/src/mainboard/tyan/s8226/get_bus_conf.c b/src/mainboard/tyan/s8226/get_bus_conf.c
new file mode 100644
index 0000000..5171c45
--- /dev/null
+++ b/src/mainboard/tyan/s8226/get_bus_conf.c
@@ -0,0 +1,144 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include "agesawrapper.h"
+#if CONFIG_AMD_SB_CIMX
+#include <sb_cimx.h>
+#endif
+
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+ * and acpi_tables busnum is default.
+ */
+u8 bus_isa;
+u8 bus_sp5100[2];
+u8 bus_sr5650[14];
+
+
+u32 bus_type[256];
+
+u32 sbdn_sr5650;
+u32 sbdn_sp5100;
+
+void get_bus_conf(void);
+static u32 get_bus_conf_done = 0;
+
+void get_bus_conf(void)
+{
+	u32 status;
+
+	device_t dev;
+	int i, j;
+
+	if (get_bus_conf_done == 1)
+		return;   /* do it only once */
+
+	get_bus_conf_done = 1;
+
+	/*
+	 * This is the call to AmdInitLate.  It is really in the wrong place, conceptually,
+	 * but functionally within the coreboot model, this is the best place to make the
+	 * call.  The logically correct place to call AmdInitLate is after PCI scan is done,
+	 * after the decision about S3 resume is made, and before the system tables are
+	 * written into RAM.  The routine that is responsible for writing the tables is
+	 * "write_tables", called near the end of "hardwaremain".  There is no platform
+	 * specific entry point between the S3 resume decision point and the call to
+	 * "write_tables", and the next platform specific entry points are the calls to
+	 * the ACPI table write functions.  The first of ose would seem to be the right
+	 * place, but other table write functions, e.g. the PIRQ table write function, are
+	 * called before the ACPI tables are written.  This routine is called at the beginning
+	 * of each of the write functions called prior to the ACPI write functions, so this
+	 * becomes the best place for this call.
+	 */
+	status = agesawrapper_amdinitlate();
+	if(status) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+	}
+
+	sbdn_sp5100 = 0;
+
+	for (i = 0; i < 0; i++) {
+		bus_sp5100[i] = 0;
+	}
+	for (i = 0; i < ARRAY_SIZE(bus_sr5650); i++) {
+		bus_sr5650[i] = 0;
+	}
+
+	for (i = 0; i < 256; i++) {
+		bus_type[i] = 0; /* default ISA bus. */
+	}
+
+	bus_type[0] = 1;  /* pci */
+
+	bus_sr5650[0] = 0;
+	bus_sp5100[0] = bus_sr5650[0];
+
+	/* sp5100 */
+	dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4));
+
+	if (dev) {
+		bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+		bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+		bus_isa++;
+		for (j = bus_sp5100[1]; j < bus_isa; j++)
+			bus_type[j] = 1;
+	}
+
+	/* sr5650 */
+	for (i = 1; i < ARRAY_SIZE(bus_sr5650); i++) {
+		dev = dev_find_slot(bus_sr5650[0], PCI_DEVFN(sbdn_sr5650 + i, 0));
+		if (dev) {
+			bus_sr5650[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			if(255 != bus_sr5650[i]) {
+				bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+				bus_isa++;
+				bus_type[bus_sr5650[i]] = 1; /* PCI bus. */
+			}
+		}
+	}
+
+/*
+	for (i = 0; i < 4; i++) {
+		dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, i));
+		if (dev) {
+			bus_sp5100[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+			bus_isa++;
+		}
+	}
+	for (j = bus_sp5100[2]; j < bus_isa; j++)
+		bus_type[j] = 1;
+*/
+
+
+	/* I/O APICs:   APIC ID Version State   Address */
+	bus_isa = 10;
+
+#if CONFIG_AMD_SB_CIMX
+	sb_After_Pci_Init();
+	sb_Late_Post();
+#endif
+}
diff --git a/src/mainboard/tyan/s8226/irq_tables.c b/src/mainboard/tyan/s8226/irq_tables.c
new file mode 100644
index 0000000..11e5256
--- /dev/null
+++ b/src/mainboard/tyan/s8226/irq_tables.c
@@ -0,0 +1,122 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+		u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+		u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+		u8 slot, u8 rfu)
+{
+	pirq_info->bus = bus;
+	pirq_info->devfn = devfn;
+	pirq_info->irq[0].link = link0;
+	pirq_info->irq[0].bitmap = bitmap0;
+	pirq_info->irq[1].link = link1;
+	pirq_info->irq[1].bitmap = bitmap1;
+	pirq_info->irq[2].link = link2;
+	pirq_info->irq[2].bitmap = bitmap2;
+	pirq_info->irq[3].link = link3;
+	pirq_info->irq[3].bitmap = bitmap3;
+	pirq_info->slot = slot;
+	pirq_info->rfu = rfu;
+}
+extern u8 bus_isa;
+extern u8 bus_sp5100[2];
+extern unsigned long sbdn_sp5100;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+
+	struct irq_routing_table *pirq;
+	struct irq_info *pirq_info;
+	u32 slot_num;
+	u8 *v;
+
+	u8 sum = 0;
+	int i;
+
+
+	get_bus_conf();		/* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+
+	/* Align the table to be 16 byte aligned. */
+	addr += 15;
+	addr &= ~15;
+
+	/* This table must be betweeen 0xf0000 & 0x100000 */
+	printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+	pirq = (void *)(addr);
+	v = (u8 *) (addr);
+
+	pirq->signature = PIRQ_SIGNATURE;
+	pirq->version = PIRQ_VERSION;
+
+	pirq->rtr_bus = bus_sp5100[0];
+	pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4;
+
+	pirq->exclusive_irqs = 0;
+
+	pirq->rtr_vendor = 0x1002;
+	pirq->rtr_device = 0x4384;
+
+	pirq->miniport_data = 0;
+
+	memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+	pirq_info = (void *)(&pirq->checksum + 1);
+	slot_num = 0;
+
+
+	/* pci bridge */
+	write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4,
+			0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+			0);
+	pirq_info++;
+
+
+
+	slot_num++;
+
+
+
+	pirq->size = 32 + 16 * slot_num;
+
+	for (i = 0; i < pirq->size; i++)
+		sum += v[i];
+
+	sum = pirq->checksum - sum;
+
+	if (sum != pirq->checksum) {
+		pirq->checksum = sum;
+	}
+
+	printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+	return (unsigned long)pirq_info;
+
+}
diff --git a/src/mainboard/tyan/s8226/mainboard.c b/src/mainboard/tyan/s8226/mainboard.c
new file mode 100644
index 0000000..9190feb
--- /dev/null
+++ b/src/mainboard/tyan/s8226/mainboard.c
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <boot/tables.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <NbPlatform.h>
+#include "chip.h"
+
+void set_pcie_dereset(void *nbconfig);
+void set_pcie_reset(void *nbconfig);
+
+/**
+ *
+ */
+void set_pcie_reset(void *nbconfig)
+{
+}
+
+/**
+ * Mainboard specific RD890 CIMx callback
+ * Release Resets to PCIe Links
+ * For Both SR56X0 chips, PCIE_RESET_GPIO1 to reset pcie
+ */
+void set_pcie_dereset(void *nbconfig)
+{
+	//u32 nb_dev = MAKE_SBDFO(0, 0x0, 0x0, 0x0, 0x0);
+	u32 i;
+	u32 val;
+	u32 nb_addr;
+
+	val = 0x00000007UL;
+	AMD_NB_CONFIG_BLOCK *pConfig = (AMD_NB_CONFIG_BLOCK*)nbconfig;
+	for (i = 0; i < MAX_NB_COUNT; i ++) {
+		nb_addr = pConfig->Northbridges[i].NbPciAddress.AddressValue | NB_HTIU_INDEX;
+		LibNbPciIndexRMW(nb_addr,
+				NB_HTIU_REGA8,
+				AccessS3SaveWidth32,
+				~val,
+				val,
+				 &(pConfig->Northbridges[i]));
+	}
+}
+
+
+/*************************************************
+ * enable the dedicated function in s8226 board.
+ *************************************************/
+static void s8226_enable(device_t dev)
+{
+	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+}
+
+struct chip_operations mainboard_ops = {
+	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
+		.enable_dev = s8226_enable,
+};
diff --git a/src/mainboard/tyan/s8226/mptable.c b/src/mainboard/tyan/s8226/mptable.c
new file mode 100644
index 0000000..61a7bd4
--- /dev/null
+++ b/src/mainboard/tyan/s8226/mptable.c
@@ -0,0 +1,196 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+extern u8 bus_sr5650[14];
+extern u8 bus_sp5100[2];
+extern u32 bus_type[256];
+extern u32 sbdn_sr5650;
+extern u32 sbdn_sp5100;
+extern u8 bus_isa;
+
+
+static void *smp_write_config_table(void *v)
+{
+	struct mp_config_table *mc;
+	u32 apicid_sp5100;
+	u32 apicid_sr5650;
+	device_t dev;
+	u32 dword;
+
+	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+	mptable_init(mc, LOCAL_APIC_ADDR);
+
+	smp_write_processors(mc);
+	get_bus_conf();
+	mptable_write_buses(mc, NULL, &bus_isa);
+
+	/*
+	 * AGESA v5 Apply apic enumeration rules
+	 * For systems with >= 16 APICs, put the IO-APICs at 0..n and
+	 * put the local-APICs at m..z
+	 * For systems with < 16 APICs, put the Local-APICs at 0..n and
+	 * put the IO-APICs at (n + 1)..z
+	 */
+#if CONFIG_MAX_CPUS >= 16
+	apicid_sp5100 = 0x0;
+#else
+	apicid_sp5100 = CONFIG_MAX_CPUS + 1
+#endif
+	apicid_sr5650 = apicid_sp5100 + 1;
+
+	dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0));
+	if (dev) {
+		/* Set SP5100 IOAPIC ID */
+		dword = pci_read_config32(dev, 0x74) & 0xfffffff0;
+		smp_write_ioapic(mc, apicid_sp5100, 0x20, dword);
+
+#ifdef UNUSED_CODE
+		u8 byte;
+		/* Initialize interrupt mapping */
+		/* aza */
+		byte = pci_read_config8(dev, 0x63);
+		byte &= 0xf8;
+		byte |= 0; /* 0: INTA, ...., 7: INTH */
+		pci_write_config8(dev, 0x63, byte);
+		/* SATA */
+		dword = pci_read_config32(dev, 0xAC);
+		dword &= ~(7 << 26);
+		dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */
+		/* dword |= 1<<22; PIC and APIC co exists */
+		pci_write_config32(dev, 0xAC, dword);
+#endif
+
+		/*
+		 * 00:12.0: PROG SATA : INT F
+		 * 00:13.0: INTA USB_0
+		 * 00:13.1: INTB USB_1
+		 * 00:13.2: INTC USB_2
+		 * 00:13.3: INTD USB_3
+		 * 00:13.4: INTC USB_4
+		 * 00:13.5: INTD USB2
+		 * 00:14.1: INTA IDE
+		 * 00:14.2: Prog HDA : INT E
+		 * 00:14.5: INTB ACI
+		 * 00:14.6: INTB MCI
+		 */
+
+		/* Set RS5650 IOAPIC ID */
+		dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+		if (dev) {
+			pci_write_config32(dev, 0xF8, 0x1);
+			dword = pci_read_config32(dev, 0xFC) & 0xfffffff0;
+			smp_write_ioapic(mc, apicid_sr5650, 0x20, dword);
+		}
+
+	}
+
+	/* I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+	smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+	mptable_add_isa_interrupts(mc, bus_isa, apicid_sp5100, 0);
+
+	/* PCI interrupts are level triggered, and are
+	 * associated with a specific bus/device/function tuple.
+	 */
+#define PCI_INT(bus, dev, int_sign, pin) \
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_sp5100, (pin))
+
+	/* SMBUS */
+	//PCI_INT(0x0, 0x14, 0x0, 0x10); //not generate interrupt, 3Ch hardcoded to 0
+
+	/* HD Audio */
+	PCI_INT(0x0, 0x14, 0x2, 0x10);
+
+	/* USB */
+	/* OHCI0, OHCI1 hard-wired to 01h, corresponding to using INTA# */
+	/* EHCI hard-wired to 02h, corresponding to using INTB# */
+	/* USB1 */
+	PCI_INT(0x0, 0x12, 0x0, 0x10); /* OHCI0 Port 0~2 */
+	PCI_INT(0x0, 0x12, 0x1, 0x10); /* OHCI1 Port 3~5 */
+	PCI_INT(0x0, 0x12, 0x2, 0x11); /* EHCI Port 0~5 */
+
+	/* USB2 */
+	PCI_INT(0x0, 0x13, 0x0, 0x10); /* OHCI0 Port 6~8 */
+	PCI_INT(0x0, 0x13, 0x1, 0x10); /* OHCI1 Port 9~11 */
+	PCI_INT(0x0, 0x13, 0x2, 0x11); /* EHCI Port 6~11 */
+
+	/* USB3 EHCI hard-wired to 03h, corresponding to using INTC# */
+	PCI_INT(0x0, 0x14, 0x5, 0x12); /* OHCI0 Port 12~13 */
+
+	/* SATA */
+	PCI_INT(0x0, 0x11, 0x0, 0x16); //6, INTG
+
+	/* on board NIC & Slot PCIE.  */
+	/* configuration B doesnt need dev 5,6,7 */
+	/*
+	 * PCI_INT(bus_sr5650[0x5], 0x0, 0x0, 0x11);
+	 * PCI_INT(bus_sr5650[0x6], 0x0, 0x0, 0x12);
+	 * PCI_INT(bus_sr5650[0x7], 0x0, 0x0, 0x13);
+	 */
+
+	//smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0, (((13)<<2)|(0)), apicid_sr5650, 28); /* dev d */
+	//smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sr5650[13], (((0)<<2)|(1)), apicid_sr5650, 0); /* card behind dev13 */
+
+	/* PCI slots */
+	/* PCI_SLOT 0. */
+	PCI_INT(bus_sp5100[1], 0x5, 0x0, 0x14);
+	PCI_INT(bus_sp5100[1], 0x5, 0x1, 0x15);
+	PCI_INT(bus_sp5100[1], 0x5, 0x2, 0x16);
+	PCI_INT(bus_sp5100[1], 0x5, 0x3, 0x17);
+
+	/* PCI_SLOT 1. */
+	PCI_INT(bus_sp5100[1], 0x6, 0x0, 0x15);
+	PCI_INT(bus_sp5100[1], 0x6, 0x1, 0x16);
+	PCI_INT(bus_sp5100[1], 0x6, 0x2, 0x17);
+	PCI_INT(bus_sp5100[1], 0x6, 0x3, 0x14);
+
+	/* PCI_SLOT 2. */
+	PCI_INT(bus_sp5100[1], 0x7, 0x0, 0x16);
+	PCI_INT(bus_sp5100[1], 0x7, 0x1, 0x17);
+	PCI_INT(bus_sp5100[1], 0x7, 0x2, 0x14);
+	PCI_INT(bus_sp5100[1], 0x7, 0x3, 0x15);
+
+
+	/*Local Ints:   Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+	IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0);
+	IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1);
+	/* There is no extension information... */
+
+	/* Compute the checksums */
+	return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr, 0);
+	return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/tyan/s8226/platform_cfg.h b/src/mainboard/tyan/s8226/platform_cfg.h
new file mode 100644
index 0000000..bbc4ad7
--- /dev/null
+++ b/src/mainboard/tyan/s8226/platform_cfg.h
@@ -0,0 +1,54 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef _PLATFORM_CFG_H_
+#define _PLATFORM_CFG_H_
+
+
+/* northbridge customize options */
+/**
+ * Max number of northbridges in the system
+ */
+#define MAX_NB_COUNT		1 //TODO: only 1 NB tested
+
+/**
+ *  Enable check for PCIe endpoint to be ready for PCI enumeration.
+ *
+ */
+//#define  EPREADY_WORKAROUND_DISABLED
+
+/**
+ *  Enable IOMMU support. Initialize IOMMU subsystem, generate IVRS ACPI table.
+ *
+ */
+#define  IOMMU_SUPPORT_DISABLE //TODO: enable it
+
+/**
+ *  Disable server PCIe hotplug support.
+ */
+
+//#define HOTPLUG_SUPPORT_DISABLED
+
+/**
+ *  Disable support for device number remapping for PCIe portsserver PCIe hotplug support.
+ */
+
+//#define DEVICE_REMAP_DISABLE
+
+#endif //_PLATFORM_CFG_H_
diff --git a/src/mainboard/tyan/s8226/platform_oem.c b/src/mainboard/tyan/s8226/platform_oem.c
new file mode 100644
index 0000000..883cad1
--- /dev/null
+++ b/src/mainboard/tyan/s8226/platform_oem.c
@@ -0,0 +1,50 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  OemCustomizeInitEarly
+ *
+ *  Description:
+ *    This is the stub function will call the host environment through the binary block
+ *    interface (call-out port) to provide a user hook opportunity
+ *
+ *  Parameters:
+ *    @param[in]      **PeiServices
+ *    @param[in]      *InitEarly
+ *
+ *    @retval         VOID
+ *
+ **/
+/*---------------------------------------------------------------------------------------*/
+VOID OemCustomizeInitEarly(IN OUT AMD_EARLY_PARAMS *InitEarly);
+VOID OemCustomizeInitEarly(IN OUT AMD_EARLY_PARAMS *InitEarly)
+{
+	//InitEarly->PlatformConfig.CoreLevelingMode = CORE_LEVEL_TWO;
+}
+
diff --git a/src/mainboard/tyan/s8226/rd890_cfg.c b/src/mainboard/tyan/s8226/rd890_cfg.c
new file mode 100644
index 0000000..7a947b3
--- /dev/null
+++ b/src/mainboard/tyan/s8226/rd890_cfg.c
@@ -0,0 +1,274 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "NbPlatform.h"
+#include "rd890_cfg.h"
+#include "northbridge/amd/cimx/rd890/chip.h"
+#include "nbInitializer.h"
+#include <string.h>
+#include <arch/ioapic.h>
+
+#ifndef __PRE_RAM__
+#include <device/device.h>
+extern void set_pcie_reset(void *config);
+extern void set_pcie_dereset(void *config);
+
+/**
+ * Platform dependent configuration at ramstage
+ */
+static void nb_platform_config(device_t nb_dev, AMD_NB_CONFIG *NbConfigPtr)
+{
+	u16 i;
+	PCIE_CONFIG *pPcieConfig = NbConfigPtr->pPcieConfig;
+	//AMD_NB_CONFIG_BLOCK *ConfigPtr = GET_BLOCK_CONFIG_PTR(NbConfigPtr);
+	struct northbridge_amd_cimx_rd890_config *rd890_info = NULL;
+	DEFAULT_PLATFORM_CONFIG(platform_config);
+
+	/* update the platform depentent configuration by devicetree */
+	rd890_info  = nb_dev->chip_info;
+	platform_config.PortEnableMap = rd890_info->port_enable;
+	if (rd890_info->gpp1_configuration == 0) {
+		platform_config.Gpp1Config = GFX_CONFIG_AAAA;
+	} else if (rd890_info->gpp1_configuration == 1) {
+		platform_config.Gpp1Config = GFX_CONFIG_AABB;
+	}
+	if (rd890_info->gpp2_configuration == 0) {
+		platform_config.Gpp2Config = GFX_CONFIG_AAAA;
+	} else if (rd890_info->gpp2_configuration == 1) {
+		platform_config.Gpp2Config = GFX_CONFIG_AABB;
+	}
+	platform_config.Gpp3aConfig = rd890_info->gpp3a_configuration;
+
+	if (platform_config.Gpp1Config != 0) {
+		pPcieConfig->CoreConfiguration[0] = platform_config.Gpp1Config;
+	}
+	if (platform_config.Gpp2Config != 0) {
+		pPcieConfig->CoreConfiguration[1] = platform_config.Gpp2Config;
+	}
+	if (platform_config.Gpp3aConfig != 0) {
+		pPcieConfig->CoreConfiguration[2] = platform_config.Gpp3aConfig;
+	}
+
+	pPcieConfig->TempMmioBaseAddress = (UINT16)(platform_config.TemporaryMmio >> 20);
+	for (i = 0; i <= MAX_CORE_ID; i++) {
+		NbConfigPtr->pPcieConfig->CoreSetting[i].SkipConfiguration = OFF;
+		NbConfigPtr->pPcieConfig->CoreSetting[i].PerformanceMode = OFF;
+	}
+	for (i = MIN_PORT_ID; i <= MAX_PORT_ID; i++) {
+		NbConfigPtr->pPcieConfig->PortConfiguration[i].PortLinkMode = PcieLinkModeGen2;
+	}
+
+	for (i = MIN_PORT_ID; i <= MAX_PORT_ID; i++) {
+		if ((platform_config.PortEnableMap & (1 << i)) != 0) {
+			pPcieConfig->PortConfiguration[i].PortPresent = ON;
+			if ((platform_config.PortGen1Map & (1 << i)) != 0) {
+				pPcieConfig->PortConfiguration[i].PortLinkMode = PcieLinkModeGen1;
+			}
+			if ((platform_config.PortHotplugMap & (1 << i)) != 0) {
+				u16 j;
+				pPcieConfig->PortConfiguration[j].PortHotplug = ON; /* Enable Hotplug */
+				/* Set Hotplug descriptor info */
+				for (j = 0; j < 8; j++) {
+					u32 PortDescriptor;
+					PortDescriptor = platform_config.PortHotplugDescriptors[j];
+					if ((PortDescriptor & 0xF) == j) {
+						pPcieConfig->ExtPortConfiguration[j].PortHotplugDevMap  = (PortDescriptor >> 4)  & 3;
+						pPcieConfig->ExtPortConfiguration[j].PortHotplugByteMap = (PortDescriptor >> 6)  & 1;
+						break;
+					}
+				}
+			}
+		}
+	}
+}
+#endif // __PRE_RAM__
+
+/**
+ * @brief Entry point of Northbridge CIMx callout/CallBack
+ *
+ * prototype AGESA_STATUS (*CALLOUT_ENTRY) (UINT32 Param1, UINTN Param2, VOID* ConfigPtr);
+ *
+ * @param[in] u32 func               Northbridge CIMx CallBackId
+ * @param[in] u32 data               Northbridge Input Data.
+ * @param[in] AMD_NB_CONFIG *config  Northbridge configuration structure pointer.
+ *
+ */
+static u32 rd890_callout_entry(u32 func, u32 data, void *config)
+{
+	u32 ret = 0;
+#ifndef __PRE_RAM__
+	device_t nb_dev = (device_t)data;
+#endif
+	AMD_NB_CONFIG *nbConfigPtr = (AMD_NB_CONFIG*)config;
+
+	switch (func) {
+		case PHCB_AmdPortTrainingCompleted:
+			break;
+
+		case PHCB_AmdPortResetDeassert:
+#ifndef __PRE_RAM__
+			set_pcie_dereset(config);
+#endif
+			break;
+
+		case PHCB_AmdPortResetAssert:
+#ifndef __PRE_RAM__
+			set_pcie_reset(config);
+#endif
+			break;
+
+		case PHCB_AmdPortResetSupported:
+			break;
+		case PHCB_AmdGeneratePciReset:
+			break;
+		case PHCB_AmdGetExclusionTable:
+			break;
+		case PHCB_AmdAllocateBuffer:
+			break;
+		case PHCB_AmdUpdateApicInterruptMapping:
+			break;
+		case PHCB_AmdFreeBuffer:
+			break;
+		case PHCB_AmdLocateBuffer:
+			break;
+		case PHCB_AmdReportEvent:
+			break;
+		case PHCB_AmdPcieAsmpInfo:
+			break;
+
+		case CB_AmdSetNbPorConfig:
+			break;
+		case CB_AmdSetHtConfig:
+			/*TODO: different HT path and deempasis for each NB */
+			nbConfigPtr->pHtConfig->NbTransmitterDeemphasis = DEFAULT_HT_DEEMPASIES;
+
+			break;
+		case CB_AmdSetPcieEarlyConfig:
+#ifndef __PRE_RAM__
+			nb_platform_config(nb_dev, nbConfigPtr);
+#endif
+			break;
+
+		case CB_AmdSetEarlyPostConfig:
+			break;
+
+		case CB_AmdSetMidPostConfig:
+			nbConfigPtr->pNbConfig->IoApicBaseAddress = IO_APIC_ADDR;
+#ifndef IOMMU_SUPPORT_DISABLE //TODO enable iommu
+			/* SBIOS must alloc 16K memory for IOMMU MMIO */
+			UINT32  MmcfgBarAddress; //using default IOmmuBaseAddress
+			LibNbPciRead(nbConfigPtr->NbPciAddress.AddressValue | 0x1C,
+					AccessWidth32,
+					&MmcfgBarAddress,
+					nbConfigPtr);
+			MmcfgBarAddress &= ~0xf;
+			if (MmcfgBarAddress != 0) {
+				nbConfigPtr->IommuBaseAddress = MmcfgBarAddress;
+			}
+			nbConfigPtr->IommuBaseAddress = 0; //disable iommu
+#endif
+			break;
+
+		case CB_AmdSetLatePostConfig:
+			break;
+
+		case CB_AmdSetRecoveryConfig:
+			break;
+	}
+
+	return ret;
+}
+
+
+/**
+ * @brief North Bridge CIMx configuration
+ *
+ * should be called before exeucte CIMx function.
+ * this function will be called in romstage and ramstage.
+ */
+void rd890_cimx_config(AMD_NB_CONFIG_BLOCK *pConfig, NB_CONFIG *nbConfig, HT_CONFIG *htConfig, PCIE_CONFIG *pcieConfig)
+{
+	u16 i = 0;
+	PCI_ADDR PciAddress;
+	u32 val, sbNode, sbLink;
+
+	if (!pConfig) {
+		return;
+	}
+
+	memset(pConfig, 0, sizeof(AMD_NB_CONFIG_BLOCK));
+	for (i = 0; i < MAX_NB_COUNT; i++) {
+		pConfig->Northbridges[i].pNbConfig	= &nbConfig[i];
+		pConfig->Northbridges[i].pHtConfig	= &htConfig[i];
+		pConfig->Northbridges[i].pPcieConfig	= &pcieConfig[i];
+		pConfig->Northbridges[i].ConfigPtr	= &pConfig;
+	}
+
+	/* Initialize all NB structures */
+	AmdInitializer(pConfig);
+
+	pConfig->NumberOfNorthbridges = MAX_NB_COUNT - 1; /* Support limited to primary NB only located at 0:0:0 */
+	//pConfig->StandardHeader.ImageBasePtr = CIMX_B2_IMAGE_BASE_ADDRESS;
+	pConfig->StandardHeader.PcieBasePtr = (VOID *)PCIEX_BASE_ADDRESS;
+	pConfig->StandardHeader.CalloutPtr = &rd890_callout_entry;
+
+	/*
+	 * PCI Address to Access NB. Depends on HT topology and configuration for multi NB platform.
+	 * Always 0:0:0 on single NB platform.
+	 */
+	pConfig->Northbridges[0].NbPciAddress.AddressValue = MAKE_SBDFO(0, 0x0, 0x0, 0x0, 0x0);
+
+	/* Set HT path to NB by SbNode and SbLink */
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x60);
+	LibNbPciRead(PciAddress.AddressValue, AccessWidth32, &val, &(pConfig->Northbridges[0]));
+	sbNode = (val >> 8) & 0x07;
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x64);
+	LibNbPciRead(PciAddress.AddressValue, AccessWidth32, &val, &(pConfig->Northbridges[0]));
+	sbLink = (val >> 8) & 0x07; //assum ganged
+	pConfig->Northbridges[0].NbHtPath.NodeID = sbNode;
+	pConfig->Northbridges[0].NbHtPath.LinkID = sbLink;
+	//TODO: other NBs
+
+#ifndef __PRE_RAM__
+	/* If temporrary MMIO enable set up CPU MMIO */
+	for (i = 0; i <= pConfig->NumberOfNorthbridges; i++) {
+		UINT32  MmioBase;
+		UINT32  LinkId;
+		UINT32  SubLinkId;
+		MmioBase = pConfig->Northbridges[i].pPcieConfig->TempMmioBaseAddress;
+		if (MmioBase != 0) {
+			LinkId = pConfig->Northbridges[i].NbHtPath.LinkID & 0xf;
+			SubLinkId = ((pConfig->Northbridges[i].NbHtPath.LinkID & 0xF0) == 0x20) ? 1 : 0;
+			/* Set Limit */
+			LibNbPciRMW(MAKE_SBDFO (0, 0, 0x18, 0x1, (i * 4) + 0x84),
+					AccessWidth32,
+					0x0,
+					((MmioBase << 12) + 0xF00) | (LinkId << 4) | (SubLinkId << 6),
+					&(pConfig->Northbridges[i]));
+			/* Set Base */
+			LibNbPciRMW(MAKE_SBDFO (0, 0, 0x18, 0x1, (i * 4) + 0x80),
+					AccessWidth32,
+					0x0,
+					(MmioBase << 12) | 0x3,
+					&(pConfig->Northbridges[i]));
+		}
+	}
+#endif
+}
+
diff --git a/src/mainboard/tyan/s8226/rd890_cfg.h b/src/mainboard/tyan/s8226/rd890_cfg.h
new file mode 100644
index 0000000..8f45019
--- /dev/null
+++ b/src/mainboard/tyan/s8226/rd890_cfg.h
@@ -0,0 +1,174 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef  _RD890_CFG_H_
+#define _RD890_CFG_H_
+
+#include "NbPlatform.h"
+
+/* platform dependent configuration default value */
+
+/**
+ * Path from CPU to NB
+ * [0..7]   - Node  (0..8)
+ * [8..11]  - Link  (0..3)
+ * [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0.
+ */
+#ifndef DEFAULT_HT_PATH
+#if CONFIG_CPU_AMD_AGESA_FAMILY10 == 1
+#define DEFAULT_HT_PATH		{0x0, 0x3}
+#endif
+#if CONFIG_CPU_AMD_AGESA_FAMILY15 == 1
+#define DEFAULT_HT_PATH		{0x0, 0x1}
+#endif
+#endif
+
+/**
+ * Bitmap of enabled ports on NB #0/1/2/3
+ * Bit[0] - Reserved
+ * Bit[1] - Reserved
+ * Bit[2] - Enable PCIe port 2
+ * Bit[3] - Enable PCIe port 3
+ * Bit[4] - Enable PCIe port 4
+ * Bit[5] - Enable PCIe port 5
+ * Bit[6] - Enable PCIe port 2
+ * Bit[7] - Enable PCIe port 7
+ * Bit[8] - Reserved
+ * Bit[9] - Enable PCIe port 9
+ * Bit[10]- Enable PCIe port 10
+ * Bit[11]- Enable PCIe port 11
+ * Bit[12]- Enable PCIe port 12
+ * Bit[13]- Enable PCIe port 13
+ * Example:
+ *  port_enable = 0x14
+ *  Port 2 and 4 enabled for training/initialization
+ */
+#ifndef DEFAULT_PORT_ENABLE_MAP
+#define DEFAULT_PORT_ENABLE_MAP		0x0014
+#endif
+
+/**
+ * Bitmap of ports that have slot or onboard device connected.
+ * Example force PCIe Gen1 supporton port 2 and 4  (DEFAULT_PORT_ENABLE_MAP = BIT2 | BIT4)
+ * #define DEFAULT_PORT_FORCE_GEN1        0x604
+ */
+#ifndef DEFAULT_PORT_FORCE_GEN1
+#define DEFAULT_PORT_FORCE_GEN1		0x0
+#endif
+
+/**
+ * Bitmap of ports that have server hotplug support
+ */
+#ifndef DEFAULT_HOTPLUG_SUPPORT
+#define DEFAULT_HOTPLUG_SUPPORT		0x0
+#endif
+
+#ifndef DEFAULT_HOTPLUG_DESCRIPTOR
+#define DEFAULT_HOTPLUG_DESCRIPTOR		{0, 0, 0, 0, 0, 0, 0, 0}
+#endif
+
+#ifndef DEFAULT_TEMPMMIO_BASE_ADDRESS
+#define DEFAULT_TEMPMMIO_BASE_ADDRESS		0xD0000000
+#endif
+
+/**
+ * Default GPP1 core configuraton on NB #0/1/2/3.
+ *  2  x8 slot, GFX_CONFIG_AABB
+ *  1 x16 slot, GFX_CONFIG_AAAA
+ */
+#ifndef DEFAULT_GPP1_CONFIG
+#define DEFAULT_GPP1_CONFIG		GFX_CONFIG_AABB
+#endif
+
+/**
+ * Default GPP2 core configuraton on NB #0/1/2/3.
+ *  2  x8 slot, GFX_CONFIG_AABB
+ *  1 x16 slot, GFX_CONFIG_AAAA
+ */
+#ifndef DEFAULT_GPP2_CONFIG
+#define DEFAULT_GPP2_CONFIG		GFX_CONFIG_AABB
+#endif
+
+/**
+ * Default GPP3a core configuraton on NB #0/1/2/3.
+ * 4:2:0:0:0:0   - GPP_CONFIG_GPP420000, 0x1
+ * 4:1:1:0:0:0   - GPP_CONFIG_GPP411000, 0x2
+ * 2:2:2:0:0:0   - GPP_CONFIG_GPP222000, 0x3
+ * 2:2:1:1:0:0   - GPP_CONFIG_GPP221100, 0x4
+ * 2:1:1:1:1:0   - GPP_CONFIG_GPP211110, 0x5
+ * 1:1:1:1:1:1   - GPP_CONFIG_GPP111111, 0x6
+ */
+#ifndef DEFAULT_GPP3A_CONFIG
+#define DEFAULT_GPP3A_CONFIG		GPP_CONFIG_GPP111111
+#endif
+
+
+/**
+ * Default HT Transmitter de-emphasis setting
+ */
+#ifndef DEFAULT_HT_DEEMPASIES
+#define DEFAULT_HT_DEEMPASIES		0x3
+#endif
+
+/**
+ * Default APIC nterrupt base for IOAPIC
+ */
+#ifndef DEFAULT_APIC_INTERRUPT_BASE
+#define DEFAULT_APIC_INTERRUPT_BASE	24
+#endif
+
+
+#define DEFAULT_PLATFORM_CONFIG(name) \
+	NB_PLATFORM_CONFIG name = { \
+		DEFAULT_PORT_ENABLE_MAP, \
+		DEFAULT_PORT_FORCE_GEN1, \
+		DEFAULT_HOTPLUG_SUPPORT, \
+		DEFAULT_HOTPLUG_DESCRIPTOR, \
+		DEFAULT_TEMPMMIO_BASE_ADDRESS, \
+		DEFAULT_GPP1_CONFIG, \
+		DEFAULT_GPP2_CONFIG, \
+		DEFAULT_GPP3A_CONFIG, \
+		DEFAULT_HT_DEEMPASIES, \
+		/*DEFAULT_HT_PATH,*/ \
+		DEFAULT_APIC_INTERRUPT_BASE, \
+	}
+
+/**
+ * Platform configuration
+ */
+typedef struct {
+	UINT16  PortEnableMap;            ///< Bitmap of enabled ports
+	UINT16  PortGen1Map;              ///< Bitmap of ports to disable Gen2
+	UINT16  PortHotplugMap;           ///< Bitmap of ports support hotplug
+	UINT8   PortHotplugDescriptors[8];///< Ports Hotplug descriptors
+	UINT32  TemporaryMmio;            ///< Temporary MMIO
+	UINT32  Gpp1Config;               ///< Default PCIe GFX core configuration
+	UINT32  Gpp2Config;               ///< Default PCIe GPP2 core configuration
+	UINT32  Gpp3aConfig;              ///< Default PCIe GPP3a core configuration
+	UINT8   NbTransmitterDeemphasis;  ///< HT transmitter de-emphasis level
+	//	HT_PATH NbHtPath;                 ///< HT path to NB
+	UINT8   GlobalApicInterruptBase;  ///< Global APIC interrupt base that is used in MADT table for IO APIC.
+} NB_PLATFORM_CONFIG;
+
+/**
+ * Bridge CIMx configuration
+ */
+void rd890_cimx_config(AMD_NB_CONFIG_BLOCK *pConfig, NB_CONFIG *nbConfig, HT_CONFIG *htConfig, PCIE_CONFIG *pcieConfig);
+
+#endif //_RD890_CFG_H_
diff --git a/src/mainboard/tyan/s8226/reset.c b/src/mainboard/tyan/s8226/reset.c
new file mode 100644
index 0000000..68a39f2
--- /dev/null
+++ b/src/mainboard/tyan/s8226/reset.c
@@ -0,0 +1,66 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <reset.h>
+#include <arch/io.h>		/*inb, outb*/
+#include <arch/romcc_io.h>	/*pci_read_config32, device_t, PCI_DEV*/
+
+#define HT_INIT_CONTROL		0x6C
+#define HTIC_BIOSR_Detect	(1<<5)
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 32
+#define NODE_PCI(x, fn)	((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
+#else
+#define NODE_PCI(x, fn)	PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
+#endif
+
+static inline void set_bios_reset(void)
+{
+	u32 nodes;
+	u32 htic;
+	device_t dev;
+	int i;
+
+	nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
+	for(i = 0; i < nodes; i++) {
+		dev = NODE_PCI(i, 0);
+		htic = pci_read_config32(dev, HT_INIT_CONTROL);
+		htic &= ~HTIC_BIOSR_Detect;
+		pci_write_config32(dev, HT_INIT_CONTROL, htic);
+	}
+}
+
+void hard_reset(void)
+{
+	set_bios_reset();
+	/* Try rebooting through port 0xcf9 */
+	/* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
+	outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
+	outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
+}
+
+//SbReset();
+void soft_reset(void)
+{
+	set_bios_reset();
+	/* link reset */
+	outb(0x06, 0x0cf9);
+}
+
diff --git a/src/mainboard/tyan/s8226/romstage.c b/src/mainboard/tyan/s8226/romstage.c
new file mode 100644
index 0000000..9ebafc7
--- /dev/null
+++ b/src/mainboard/tyan/s8226/romstage.c
@@ -0,0 +1,148 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <lib.h>
+#include <reset.h>
+#include <stdint.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <arch/cpu.h>
+#include <console/console.h>
+#include <arch/stages.h>
+#include "cpu/x86/bist.h"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "agesawrapper.h"
+#include "northbridge/amd/agesa/family10/reset_test.h"
+#include <nb_cimx.h>
+#include <sb_cimx.h>
+#include "superio/nuvoton/wpcm450/wpcm450.h"
+#include "superio/winbond/w83627dhg/w83627dhg.h"
+#include "src/drivers/pc80/i8254.c"
+#include "src/drivers/pc80/i8259.c"
+#include <cpu/x86/cache.h>
+
+extern void disable_cache_as_ram(void); /* cache_as_ram.inc */
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
+#define DUMMY_DEV PNP_DEV(0x2e, 0)
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	u32 val;
+
+	post_code(0x30);
+	agesawrapper_amdinitmmio();
+	post_code(0x31);
+
+	/* Halt if there was a built in self test failure */
+	post_code(0x33);
+	report_bist_failure(bist);
+
+	sb7xx_51xx_enable_wideio(0, 0x1600); /* though UARTs are on the NUVOTON BMC */
+ 	w83627dhg_set_clksel_48(DUMMY_DEV);
+ 	w83627dhg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+	sb7xx_51xx_disable_wideio(0);
+	post_code(0x34);
+
+	uart_init();
+	post_code(0x35);
+	console_init();
+
+	val = cpuid_eax(1);
+	printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+	post_code(0x37);
+	val = agesawrapper_amdinitreset();
+	if (val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val);
+	} else {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitreset passed\n");
+	}
+
+	if (!cpu_init_detectedx && boot_cpu()) {
+		post_code(0x38);
+		/*
+		 * SR5650/5670/5690 RD890 chipset, read pci config space hang at POR,
+		 * Disable all Pcie Bridges to work around It.
+		 */
+		sr56x0_rd890_disable_pcie_bridge();
+		post_code(0x39);
+		nb_Poweron_Init();
+		post_code(0x3A);
+		sb_Poweron_Init();
+	}
+	post_code(0x3B);
+	val = agesawrapper_amdinitearly();
+	if(val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val);
+	} else {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitearly passed\n");
+	}
+
+	post_code(0x3C);
+	/* W83627DHG pin89,90 function select is RSTOUT3#, RSTOUT2# by default.
+	 * In order to access W83795G/ADG HWM using I2C protocol,
+	 * we select function to SDA, SCL function (or GP33, GP32 function).
+	 */
+	w83627dhg_enable_i2c(PNP_DEV(0x2E, W83627DHG_SPI));
+
+	nb_Ht_Init();
+	post_code(0x3D);
+	/* Reset for HT, FIDVID, PLL and ucode patch(errata) changes to take affect. */
+	if (!warm_reset_detect(0)) {
+		print_info("...WARM RESET...\n\n\n");
+		distinguish_cpu_resets(0);
+		soft_reset();
+		die("After soft_reset_x - shouldn't see this message!!!\n");
+	}
+
+	post_code(0x40);
+	val = agesawrapper_amdinitpost();
+	if (val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val);
+	} else {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitpost passed\n");
+	}
+
+	post_code(0x41);
+	val = agesawrapper_amdinitenv();
+	if(val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val);
+	}
+	printk(BIOS_DEBUG, "agesawrapper_amdinitenv passed\n");
+
+	post_code(0x42);
+
+	post_code(0x50);
+	print_debug("Disabling cache as ram ");
+	disable_cache_as_ram();
+	enable_cache();
+	print_debug("done\n");
+
+	post_code(0x51);
+	setup_i8259 ();
+	setup_i8254 ();
+	copy_and_run(0);
+
+	/* We will not return,  Should never see this message and post code. */
+	print_debug("should not be here -\n");
+	post_code(0x54);
+}
+
diff --git a/src/mainboard/tyan/s8226/sb700_cfg.c b/src/mainboard/tyan/s8226/sb700_cfg.c
new file mode 100644
index 0000000..4cbb8ca
--- /dev/null
+++ b/src/mainboard/tyan/s8226/sb700_cfg.c
@@ -0,0 +1,142 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <string.h>
+#include <console/console.h>    /* printk */
+#include "Platform.h"
+#include "sb700_cfg.h"
+
+
+/**
+ * @brief South Bridge CIMx configuration
+ *
+ * should be called before exeucte CIMx function.
+ * this function will be called in romstage and ramstage.
+ */
+void sb700_cimx_config(AMDSBCFG *sb_config)
+{
+	if (!sb_config) {
+		printk(BIOS_DEBUG, "SB700 - Cfg.c - sb700_cimx_config - No sb_config.\n");
+		return;
+	}
+	printk(BIOS_DEBUG, "SB700 - Cfg.c - sb700_cimx_config - Start.\n");
+	memset(sb_config, 0, sizeof(AMDSBCFG));
+
+	/* SB_POWERON_INIT */
+	sb_config->StdHeader.Func = SB_POWERON_INIT;
+
+	/* header */
+	sb_config->StdHeader.pPcieBase = PCIEX_BASE_ADDRESS;
+
+	/* static Build Parameters */
+	sb_config->BuildParameters.BiosSize = BIOS_SIZE;
+	sb_config->BuildParameters.LegacyFree = LEGACY_FREE;
+	sb_config->BuildParameters.EcKbd = 0;
+	sb_config->BuildParameters.EcChannel0 = 0;
+	sb_config->BuildParameters.Smbus0BaseAddress = SMBUS0_BASE_ADDRESS;
+	sb_config->BuildParameters.Smbus1BaseAddress = SMBUS1_BASE_ADDRESS;
+	sb_config->BuildParameters.SioPmeBaseAddress = SIO_PME_BASE_ADDRESS;
+	sb_config->BuildParameters.WatchDogTimerBase = WATCHDOG_TIMER_BASE_ADDRESS;
+	sb_config->BuildParameters.SpiRomBaseAddress = SPI_BASE_ADDRESS;
+
+	sb_config->BuildParameters.AcpiPm1EvtBlkAddr = PM1_EVT_BLK_ADDRESS;
+	sb_config->BuildParameters.AcpiPm1CntBlkAddr = PM1_CNT_BLK_ADDRESS;
+	sb_config->BuildParameters.AcpiPmTmrBlkAddr = PM1_TMR_BLK_ADDRESS;
+	sb_config->BuildParameters.CpuControlBlkAddr = CPU_CNT_BLK_ADDRESS;
+	sb_config->BuildParameters.AcpiGpe0BlkAddr = GPE0_BLK_ADDRESS;
+	sb_config->BuildParameters.SmiCmdPortAddr = SMI_CMD_PORT;
+	sb_config->BuildParameters.AcpiPmaCntBlkAddr = ACPI_PMA_CNT_BLK_ADDRESS;
+
+	sb_config->BuildParameters.SataIDESsid = SATA_IDE_MODE_SSID;
+	sb_config->BuildParameters.SataRAIDSsid = SATA_RAID_MODE_SSID;
+	sb_config->BuildParameters.SataRAID5Ssid = SATA_RAID5_MODE_SSID;
+	sb_config->BuildParameters.SataAHCISsid = SATA_AHCI_SSID;
+	sb_config->BuildParameters.Ohci0Ssid = OHCI0_SSID;
+	sb_config->BuildParameters.Ohci1Ssid = OHCI1_SSID;
+	sb_config->BuildParameters.Ohci2Ssid = OHCI2_SSID;
+	sb_config->BuildParameters.Ohci3Ssid = OHCI3_SSID;
+	sb_config->BuildParameters.Ohci4Ssid = OHCI4_SSID;
+	sb_config->BuildParameters.Ehci0Ssid = EHCI0_SSID;
+	sb_config->BuildParameters.Ehci1Ssid = EHCI1_SSID;
+	sb_config->BuildParameters.SmbusSsid = SMBUS_SSID;
+	sb_config->BuildParameters.IdeSsid = IDE_SSID;
+	sb_config->BuildParameters.AzaliaSsid = AZALIA_SSID;
+	sb_config->BuildParameters.LpcSsid = LPC_SSID;
+
+	sb_config->BuildParameters.HpetBase = HPET_BASE_ADDRESS;
+
+	/* General */
+	sb_config->Spi33Mhz = 1;
+	sb_config->SpreadSpectrum = 0;
+	sb_config->PciClk5 = 0;
+	sb_config->PciClks = 0x1F;
+	sb_config->ResetCpuOnSyncFlood = 1; // Do not reset CPU on sync flood
+	sb_config->TimerClockSource = 2;  // Auto
+	sb_config->S3Resume = 0;
+	sb_config->RebootRequired = 0;
+
+	/* HPET */
+	sb_config->HpetTimer = HPET_TIMER;
+
+	/* USB */
+	sb_config->UsbIntClock = 0;     // Use external clock
+	sb_config->Usb1Ohci0 = 1; //0:disable  1:enable Bus 0 Dev 18 Func0
+	sb_config->Usb1Ohci1 = 1; //0:disable  1:enable Bus 0 Dev 18 Func1
+	sb_config->Usb1Ehci  = 1; //0:disable  1:enable Bus 0 Dev 18 Func2
+	sb_config->Usb2Ohci0 = 1; //0:disable  1:enable Bus 0 Dev 19 Func0
+	sb_config->Usb2Ohci1 = 1; //0:disable  1:enable Bus 0 Dev 19 Func1
+	sb_config->Usb2Ehci  = 1; //0:disable  1:enable Bus 0 Dev 19 Func2
+	sb_config->Usb3Ohci  = 1; //0:disable  1:enable Bus 0 Dev 20 Func5
+	sb_config->UsbOhciLegacyEmulation = 1; //0:Enable  1:Disable
+
+	sb_config->AcpiS1Supported = 1;
+
+	/* SATA */
+	sb_config->SataController = 1;
+	sb_config->SataClass = CONFIG_SATA_CONTROLLER_MODE; //0 native, 1 raid, 2 ahci
+	sb_config->SataSmbus = 0;
+	sb_config->SataAggrLinkPmCap = 1;
+	sb_config->SataPortMultCap = 1;
+	sb_config->SataClkAutoOff = 1;
+	sb_config->SataIdeCombMdPriSecOpt = 0; //0 -IDE as primary, 1 -IDE as secondary.
+	//TODO: set to secondary not take effect.
+	sb_config->SataIdeCombinedMode = 0; //1 IDE controlor exposed and combined mode enabled, 0 disabled
+	sb_config->SataEspPort = 0;
+	sb_config->SataClkAutoOffAhciMode = 1;
+	sb_config->SataHpcpButNonESP = 0;
+	sb_config->SataHideUnusedPort = 0;
+
+	/* Azalia HDA */
+	sb_config->AzaliaController = AZALIA_CONTROLLER;
+	sb_config->AzaliaPinCfg = AZALIA_PIN_CONFIG;
+	sb_config->AzaliaSdin0 = AZALIA_SDIN_PIN;
+	sb_config->pAzaliaOemCodecTablePtr = NULL;
+
+#ifndef __PRE_RAM__
+	/* ramstage cimx config here */
+	if (!sb_config->StdHeader.pCallBack) {
+		sb_config->StdHeader.pCallBack = sb700_callout_entry;
+	}
+
+	//sb_config->
+#endif //!__PRE_RAM__
+	printk(BIOS_DEBUG, "SB700 - Cfg.c - sb700_cimx_config - End.\n");
+}
+
diff --git a/src/mainboard/tyan/s8226/sb700_cfg.h b/src/mainboard/tyan/s8226/sb700_cfg.h
new file mode 100644
index 0000000..45d7a92
--- /dev/null
+++ b/src/mainboard/tyan/s8226/sb700_cfg.h
@@ -0,0 +1,237 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#ifndef _SB700_CFG_H_
+#define _SB700_CFG_H_
+
+#include <stdint.h>
+
+
+/**
+ * @def BIOS_SIZE_1M
+ * @def BIOS_SIZE_2M
+ * @def BIOS_SIZE_4M
+ * @def BIOS_SIZE_8M
+ */
+#define BIOS_SIZE_1M                    0
+#define BIOS_SIZE_2M                    1
+#define BIOS_SIZE_4M                    3
+#define BIOS_SIZE_8M                    7
+
+/* In SB700, default ROM size is 1M Bytes, if your platform ROM
+ * bigger than 1M you have to set the ROM size outside CIMx module and
+ * before AGESA module get call.
+ */
+#ifndef BIOS_SIZE
+#if CONFIG_COREBOOT_ROMSIZE_KB_1024
+#define BIOS_SIZE BIOS_SIZE_1M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_2048
+#define BIOS_SIZE BIOS_SIZE_2M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_4096
+#define BIOS_SIZE BIOS_SIZE_4M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_8192
+#define BIOS_SIZE BIOS_SIZE_8M
+#endif
+#endif
+
+/**
+ * @def SPREAD_SPECTRUM
+ * @brief
+ *  0 - Disable Spread Spectrum function
+ *  1 - Enable  Spread Spectrum function
+ */
+#define SPREAD_SPECTRUM                 0
+
+/**
+ * @def SB_HPET_TIMER
+ * @breif
+ *  0 - Disable hpet
+ *  1 - Enable  hpet
+ */
+#define HPET_TIMER                      1
+
+/**
+ * @def USB_CONFIG
+ * @brief bit[0-6] used to control USB
+ *   0 - Disable
+ *   1 - Enable
+ *  Usb Ohci1 Contoller (Bus 0 Dev 18 Func0) is define at BIT0
+ *  Usb Ehci1 Contoller (Bus 0 Dev 18 Func2) is define at BIT1
+ *  Usb Ohci2 Contoller (Bus 0 Dev 19 Func0) is define at BIT2
+ *  Usb Ehci2 Contoller (Bus 0 Dev 19 Func2) is define at BIT3
+ *  Usb Ohci3 Contoller (Bus 0 Dev 22 Func0) is define at BIT4
+ *  Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5
+ *  Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6
+ */
+#define USB_CINFIG              0x7F
+
+/**
+ * @def PCI_CLOCK_CTRL
+ * @breif bit[0-4] used for PCI Slots Clock Control,
+ *   0 - disable
+ *   1 - enable
+ *  PCI SLOT 0 define at BIT0
+ *  PCI SLOT 1 define at BIT1
+ *  PCI SLOT 2 define at BIT2
+ *  PCI SLOT 3 define at BIT3
+ *  PCI SLOT 4 define at BIT4
+ */
+#define PCI_CLOCK_CTRL                  0x1F
+
+/**
+ * @def SATA_CONTROLLER
+ * @breif INCHIP Sata Controller
+ */
+#ifndef SATA_CONTROLLER
+#define SATA_CONTROLLER               1
+#endif
+
+/**
+ * @def SATA_MODE
+ * @breif INCHIP Sata Controller Mode
+ *   NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#ifndef SATA_MODE
+#define SATA_MODE                     NATIVE_IDE_MODE
+#endif
+
+/**
+ * @breif INCHIP Sata IDE Controller Mode
+ */
+#define IDE_LEGACY_MODE                 0
+#define IDE_NATIVE_MODE                 1
+
+/**
+ * @def SATA_IDE_MODE
+ * @breif INCHIP Sata IDE Controller Mode
+ *   NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#ifndef SATA_IDE_MODE
+#define SATA_IDE_MODE                 IDE_LEGACY_MODE
+#endif
+
+/**
+ * @def EXTERNAL_CLOCK
+ * @brief 00/10: Reference clock from crystal oscillator via
+ *  PAD_XTALI and PAD_XTALO
+ *
+ * @def INTERNAL_CLOCK
+ * @brief 01/11: Reference clock from internal clock through
+ *  CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL
+ */
+#define EXTERNAL_CLOCK          0x00
+#define INTERNAL_CLOCK          0x01
+
+#define SATA_CLOCK_SOURCE       EXTERNAL_CLOCK
+
+/**
+ * @def SATA_PORT_MULT_CAP_RESERVED
+ * @brief 1 ON, 0 0FF
+ */
+#define SATA_PORT_MULT_CAP_RESERVED     1
+
+
+/**
+ * @def   AZALIA_AUTO
+ * @brief Detect Azalia controller automatically.
+ *
+ * @def   AZALIA_DISABLE
+ * @brief Disable Azalia controller.
+
+ * @def   AZALIA_ENABLE
+ * @brief Enable Azalia controller.
+ */
+#define AZALIA_AUTO                     0
+#define AZALIA_DISABLE                  1
+#define AZALIA_ENABLE                   2
+
+/**
+ * @breif INCHIP HDA controller
+ */
+#ifndef AZALIA_CONTROLLER
+#define AZALIA_CONTROLLER             AZALIA_AUTO
+#endif
+
+/**
+ * @def AZALIA_PIN_CONFIG
+ * @brief
+ *  0 - disable
+ *  1 - enable
+ */
+#ifndef AZALIA_PIN_CONFIG
+#define AZALIA_PIN_CONFIG             1
+#endif
+
+/**
+ * @def AZALIA_SDIN_PIN
+ * @brief
+ *  SDIN0 is define at BIT0 & BIT1
+ *   00 - GPIO PIN
+ *   01 - Reserved
+ *   10 - As a Azalia SDIN pin
+ *  SDIN1 is define at BIT2 & BIT3
+ *  SDIN2 is define at BIT4 & BIT5
+ *  SDIN3 is define at BIT6 & BIT7
+ */
+#ifndef AZALIA_SDIN_PIN
+//#define AZALIA_SDIN_PIN             0xAA
+#define AZALIA_SDIN_PIN               0x2A
+#endif
+
+/**
+ * @def GPP_CONTROLLER
+ */
+#ifndef GPP_CONTROLLER
+#define GPP_CONTROLLER                1
+#endif
+
+/**
+ * @def GPP_CFGMODE
+ * @brief GPP Link Configuration
+ * four possible configuration:
+ *  GPP_CFGMODE_X4000
+ *  GPP_CFGMODE_X2200
+ *  GPP_CFGMODE_X2110
+ *  GPP_CFGMODE_X1111
+ */
+#ifndef GPP_CFGMODE
+#define GPP_CFGMODE                   GPP_CFGMODE_X1111
+#endif
+
+
+/**
+ * @brief South Bridge CIMx configuration
+ *
+ */
+void sb700_cimx_config(AMDSBCFG *sb_cfg);
+
+/**
+ * @brief Entry point of Southbridge CIMx callout
+ *
+ * prototype UINT32 (*SBCIM_HOOK_ENTRY)(UINT32 Param1, UINT32 Param2, void* pConfig)
+ *
+ * @param[in] func    Southbridge CIMx Function ID.
+ * @param[in] data    Southbridge Input Data.
+ * @param[in] sb_cfg  Southbridge configuration structure pointer.
+ *
+ */
+u32 sb700_callout_entry(u32 func, u32 data, void* sb_cfg);
+
+#endif //_SB700_CFG_H_



From rminnich at gmail.com  Fri Sep  7 17:19:47 2012
From: rminnich at gmail.com (ron minnich)
Date: Fri, 7 Sep 2012 08:19:47 -0700
Subject: [coreboot] help finding a quote
In-Reply-To: <CADv6+06YqQKNd=mPpNLZjx2GhJJkPfMoWTGuhhtwvZYUa7kjAw@mail.gmail.com>
References: <CAP6exYJbNvKauKUfVYQ=KCz2ZFrw+QfyZDTctQpap8-pvLbVkw@mail.gmail.com>
 <CALrs_3hvUhJsJ3ai_cDbjAKtqTTzws52DEZCJWTnaZ4V9-GKzA@mail.gmail.com>
 <CAP6exYJvoV737Qi3zx5cPmrw2dquW0+VK-av7rhgEr63jdxRLQ@mail.gmail.com>
 <CADv6+06YqQKNd=mPpNLZjx2GhJJkPfMoWTGuhhtwvZYUa7kjAw@mail.gmail.com>
Message-ID: <CAP6exYJAU+rHqkYkXucvC+vzDHCkptRyz2Ta1Rg0FAFVuY9KMA@mail.gmail.com>

Seems close ...
On Sep 7, 2012 8:04 AM, "Duncan Laurie" <dlaurie at chromium.org> wrote:

> On Thu, Sep 6, 2012 at 9:17 PM, ron minnich <rminnich at gmail.com> wrote:
>
>> never found it ...
>>
>>
>
> I remember seeing something on the gentoo list, is this it?
>
>
> http://archives.gentoo.org/gentoo-dev/msg_aab711c23ab7a209481bf9e870fb7ac8.xml
>
> -duncan
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120907/490386b4/attachment.html>

From dlaurie at chromium.org  Fri Sep  7 17:04:25 2012
From: dlaurie at chromium.org (Duncan Laurie)
Date: Fri, 7 Sep 2012 08:04:25 -0700
Subject: [coreboot] help finding a quote
In-Reply-To: <CAP6exYJvoV737Qi3zx5cPmrw2dquW0+VK-av7rhgEr63jdxRLQ@mail.gmail.com>
References: <CAP6exYJbNvKauKUfVYQ=KCz2ZFrw+QfyZDTctQpap8-pvLbVkw@mail.gmail.com>
 <CALrs_3hvUhJsJ3ai_cDbjAKtqTTzws52DEZCJWTnaZ4V9-GKzA@mail.gmail.com>
 <CAP6exYJvoV737Qi3zx5cPmrw2dquW0+VK-av7rhgEr63jdxRLQ@mail.gmail.com>
Message-ID: <CADv6+06YqQKNd=mPpNLZjx2GhJJkPfMoWTGuhhtwvZYUa7kjAw@mail.gmail.com>

On Thu, Sep 6, 2012 at 9:17 PM, ron minnich <rminnich at gmail.com> wrote:

> never found it ...
>
>

I remember seeing something on the gentoo list, is this it?

http://archives.gentoo.org/gentoo-dev/msg_aab711c23ab7a209481bf9e870fb7ac8.xml

-duncan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120907/393fb4a4/attachment.html>

From gerrit at coreboot.org  Fri Sep  7 20:04:02 2012
From: gerrit at coreboot.org (gerrit at coreboot.org)
Date: Fri, 7 Sep 2012 20:04:02 +0200
Subject: [coreboot] Patch merged into coreboot/master: fbc9bc1 superio
	winbond w83627dhg: add a function which is used on tyan s8226
References: <I5f7fa535b922b224e381886f1bea64623fa549ef+0@gerrit.coreboot.org>
Message-ID: <E1TA2uQ-0004VH-3s@ra.coresystems.de>

the following patch was just integrated into master:
commit fbc9bc1318c6ee554f0827fadd148d779173b59d
Author: Siyuan Wang <wangsiyuanbuaa at gmail.com>
Date:   Fri Sep 7 19:18:16 2012 +0800

    superio winbond w83627dhg: add a function which is used on tyan s8226
    
    this function is used on serial output of tyan s8226
    
    Change-Id: I5f7fa535b922b224e381886f1bea64623fa549ef
    Signed-off-by: Siyuan Wang <SiYuan.Wang at amd.com>
    Signed-off-by: Siyuan Wang <wangsiyuanbuaa at gmail.com>

Build-Tested: build bot (Jenkins) at Fri Sep  7 12:42:10 2012, giving +1
Reviewed-By: Alexandru Gagniuc <mr.nuke.me at gmail.com> at Fri Sep  7 20:04:01 2012, giving +2
See http://review.coreboot.org/1494 for details.

-gerrit



From gerrit at coreboot.org  Mon Sep 10 12:18:50 2012
From: gerrit at coreboot.org (Siyuan Wang (wangsiyuanbuaa@gmail.com))
Date: Mon, 10 Sep 2012 12:18:50 +0200
Subject: [coreboot] Patch set updated for coreboot: f121a8f add tyan s8226:
	add a new mainboard
References: <I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608+0@gerrit.coreboot.org>
Message-ID: <I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608+3@gerrit.coreboot.org>

Siyuan Wang (wangsiyuanbuaa at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1495

-gerrit

commit f121a8ffc16ecee16334359136d07ba496fe8e4e
Author: Siyuan Wang <wangsiyuanbuaa at gmail.com>
Date:   Fri Sep 7 19:20:02 2012 +0800

    add tyan s8226: add a new mainboard
    
    our code supports tyan s8226 now, which has two cpus on the board
    the cpu socket is C32. The details of tyan s8226 is:
    http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=679&SKU=600000190
    the test result of this mainboard is:
    1) boot Ubunbu 11.10, kernel 3.0.9. there is no err and warnings in
    dmesg.
    2) boot windows7 x64 successfully.
    3) use fwts to test the bios, there are 268 pass and 14 failed
    4) pcie and usb slots are ok.
    5) all network interfaces are ok.
    
    Change-Id: I7d8534f20b4f3c16322a5c5ba2e3fba4b4f3e608
    Signed-off-by: Siyuan Wang <SiYuan.Wang at amd.com>
    Signed-off-by: Siyuan Wang <wangsiyuanbuaa at gmail.com>
---
 src/mainboard/tyan/Kconfig                |    4 +-
 src/mainboard/tyan/s8226/BiosCallOuts.c   |  516 +++++++++
 src/mainboard/tyan/s8226/BiosCallOuts.h   |   78 ++
 src/mainboard/tyan/s8226/Kconfig          |  127 ++
 src/mainboard/tyan/s8226/Makefile.inc     |   45 +
 src/mainboard/tyan/s8226/OptionsIds.h     |   67 ++
 src/mainboard/tyan/s8226/acpi/ide.asl     |  244 ++++
 src/mainboard/tyan/s8226/acpi/routing.asl |  222 ++++
 src/mainboard/tyan/s8226/acpi/sata.asl    |  149 +++
 src/mainboard/tyan/s8226/acpi/usb.asl     |  161 +++
 src/mainboard/tyan/s8226/acpi_tables.c    |  319 +++++
 src/mainboard/tyan/s8226/agesawrapper.c   | 1204 +++++++++++++++++++
 src/mainboard/tyan/s8226/agesawrapper.h   |   87 ++
 src/mainboard/tyan/s8226/buildOpts.c      |  616 ++++++++++
 src/mainboard/tyan/s8226/cmos.layout      |  118 ++
 src/mainboard/tyan/s8226/devicetree.cb    |  128 ++
 src/mainboard/tyan/s8226/dimmSpd.c        |  222 ++++
 src/mainboard/tyan/s8226/dsdt.asl         | 1794 +++++++++++++++++++++++++++++
 src/mainboard/tyan/s8226/fadt.c           |  174 +++
 src/mainboard/tyan/s8226/get_bus_conf.c   |  144 +++
 src/mainboard/tyan/s8226/irq_tables.c     |  122 ++
 src/mainboard/tyan/s8226/mainboard.c      |   78 ++
 src/mainboard/tyan/s8226/mptable.c        |  196 ++++
 src/mainboard/tyan/s8226/platform_cfg.h   |   54 +
 src/mainboard/tyan/s8226/platform_oem.c   |   50 +
 src/mainboard/tyan/s8226/rd890_cfg.c      |  274 +++++
 src/mainboard/tyan/s8226/rd890_cfg.h      |  174 +++
 src/mainboard/tyan/s8226/reset.c          |   66 ++
 src/mainboard/tyan/s8226/romstage.c       |  148 +++
 src/mainboard/tyan/s8226/sb700_cfg.c      |  142 +++
 src/mainboard/tyan/s8226/sb700_cfg.h      |  237 ++++
 31 files changed, 7959 insertions(+), 1 deletion(-)

diff --git a/src/mainboard/tyan/Kconfig b/src/mainboard/tyan/Kconfig
index 01e4f35..25e3069 100644
--- a/src/mainboard/tyan/Kconfig
+++ b/src/mainboard/tyan/Kconfig
@@ -51,7 +51,8 @@ config BOARD_TYAN_S4880
 	bool "S4880 (Thunder K8QS)"
 config BOARD_TYAN_S4882
 	bool "S4882 (Thunder K8QS Pro)"
-
+config BOARD_TYAN_S8226
+        bool "S8226"
 endchoice
 
 source "src/mainboard/tyan/s1846/Kconfig"
@@ -69,6 +70,7 @@ source "src/mainboard/tyan/s2912/Kconfig"
 source "src/mainboard/tyan/s2912_fam10/Kconfig"
 source "src/mainboard/tyan/s4880/Kconfig"
 source "src/mainboard/tyan/s4882/Kconfig"
+source "src/mainboard/tyan/s8226/Kconfig"
 
 config MAINBOARD_VENDOR
 	string
diff --git a/src/mainboard/tyan/s8226/BiosCallOuts.c b/src/mainboard/tyan/s8226/BiosCallOuts.c
new file mode 100644
index 0000000..b7f0124
--- /dev/null
+++ b/src/mainboard/tyan/s8226/BiosCallOuts.c
@@ -0,0 +1,516 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "agesawrapper.h"
+#include "amdlib.h"
+#include "BiosCallOuts.h"
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+
+STATIC BIOS_CALLOUT_STRUCT BiosCallouts[REQUIRED_CALLOUTS] =
+{
+	{
+		AGESA_ALLOCATE_BUFFER,
+		BiosAllocateBuffer
+	},
+
+	{
+		AGESA_DEALLOCATE_BUFFER,
+		BiosDeallocateBuffer
+	},
+
+	{
+		AGESA_DO_RESET,
+		BiosReset
+	},
+
+	{
+		AGESA_LOCATE_BUFFER,
+		BiosLocateBuffer
+	},
+
+	{
+		AGESA_READ_SPD,
+		BiosReadSpd
+	},
+
+	{
+		AGESA_READ_SPD_RECOVERY,
+		BiosDefaultRet
+	},
+
+	{
+		AGESA_RUNFUNC_ONAP,
+		BiosRunFuncOnAp
+	},
+
+	{
+		AGESA_GET_IDS_INIT_DATA,
+		BiosGetIdsInitData
+	},
+
+	{
+		AGESA_HOOKBEFORE_DQS_TRAINING,
+		BiosHookBeforeDQSTraining
+	},
+
+	{
+		AGESA_HOOKBEFORE_DRAM_INIT,
+		BiosHookBeforeDramInit
+	},
+	{
+		AGESA_HOOKBEFORE_EXIT_SELF_REF,
+		BiosHookBeforeExitSelfRefresh
+	},
+};
+
+extern AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info);
+
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINTN i;
+	AGESA_STATUS CalloutStatus;
+
+	for (i = 0; i < REQUIRED_CALLOUTS; i++) {
+		if (BiosCallouts[i].CalloutName == Func) {
+			break;
+		}
+	}
+
+	if(i >= REQUIRED_CALLOUTS) {
+		return AGESA_UNSUPPORTED;
+	}
+
+	CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
+
+	return CalloutStatus;
+}
+
+
+CONST IDS_NV_ITEM IdsData[] =
+{
+	/*{
+	  AGESA_IDS_NV_MAIN_PLL_CON,
+	  0x1
+	  },
+	  {
+	  AGESA_IDS_NV_MAIN_PLL_FID_EN,
+	  0x1
+	  },
+	  {
+	  AGESA_IDS_NV_MAIN_PLL_FID,
+	  0x8
+	  },
+
+	  {
+	  AGESA_IDS_NV_CUSTOM_NB_PSTATE,
+	  },
+	  {
+	  AGESA_IDS_NV_CUSTOM_NB_P0_DIV_CTRL,
+	  },
+	  {
+	  AGESA_IDS_NV_CUSTOM_NB_P1_DIV_CTRL,
+	  },
+	  {
+	  AGESA_IDS_NV_FORCE_NB_PSTATE,
+	  },
+	 */
+	{
+		0xFFFF,
+		0xFFFF
+	}
+};
+
+#define   NUM_IDS_ENTRIES    (sizeof (IdsData) / sizeof (IDS_NV_ITEM))
+
+AGESA_STATUS BiosGetIdsInitData (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINTN   i;
+	IDS_NV_ITEM *IdsPtr;
+
+	IdsPtr = ((IDS_CALLOUT_STRUCT *) ConfigPtr)->IdsNvPtr;
+
+	if (Data == IDS_CALLOUT_INIT) {
+		for (i = 0; i < NUM_IDS_ENTRIES; i++) {
+			IdsPtr[i].IdsNvValue = IdsData[i].IdsNvValue;
+			IdsPtr[i].IdsNvId = IdsData[i].IdsNvId;
+		}
+	}
+	return AGESA_SUCCESS;
+}
+
+
+AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINT32              AvailableHeapSize;
+	UINT8               *BiosHeapBaseAddr;
+	UINT32              CurrNodeOffset;
+	UINT32              PrevNodeOffset;
+	UINT32              FreedNodeOffset;
+	UINT32              BestFitNodeOffset;
+	UINT32              BestFitPrevNodeOffset;
+	UINT32              NextFreeOffset;
+	BIOS_BUFFER_NODE   *CurrNodePtr;
+	BIOS_BUFFER_NODE   *FreedNodePtr;
+	BIOS_BUFFER_NODE   *BestFitNodePtr;
+	BIOS_BUFFER_NODE   *BestFitPrevNodePtr;
+	BIOS_BUFFER_NODE   *NextFreePtr;
+	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
+	AGESA_BUFFER_PARAMS *AllocParams;
+
+	AllocParams = ((AGESA_BUFFER_PARAMS *) ConfigPtr);
+	AllocParams->BufferPointer = NULL;
+
+	AvailableHeapSize = BIOS_HEAP_SIZE - sizeof (BIOS_HEAP_MANAGER);
+	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+	if (BiosHeapBasePtr->StartOfAllocatedNodes == 0) {
+		/* First allocation */
+		CurrNodeOffset = sizeof (BIOS_HEAP_MANAGER);
+		CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+		CurrNodePtr->BufferHandle = AllocParams->BufferHandle;
+		CurrNodePtr->BufferSize = AllocParams->BufferLength;
+		CurrNodePtr->NextNodeOffset = 0;
+		AllocParams->BufferPointer = (UINT8 *) CurrNodePtr + sizeof (BIOS_BUFFER_NODE);
+
+		/* Update the remaining free space */
+		FreedNodeOffset = CurrNodeOffset + CurrNodePtr->BufferSize + sizeof (BIOS_BUFFER_NODE);
+		FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+		FreedNodePtr->BufferSize = AvailableHeapSize - sizeof (BIOS_BUFFER_NODE) - CurrNodePtr->BufferSize;
+		FreedNodePtr->NextNodeOffset = 0;
+
+		/* Update the offsets for Allocated and Freed nodes */
+		BiosHeapBasePtr->StartOfAllocatedNodes = CurrNodeOffset;
+		BiosHeapBasePtr->StartOfFreedNodes = FreedNodeOffset;
+	} else {
+		/* Find out whether BufferHandle has been allocated on the heap. */
+		/* If it has, return AGESA_BOUNDS_CHK */
+		CurrNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+		CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+
+		while (CurrNodeOffset != 0) {
+			CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+			if (CurrNodePtr->BufferHandle == AllocParams->BufferHandle) {
+				return AGESA_BOUNDS_CHK;
+			}
+			CurrNodeOffset = CurrNodePtr->NextNodeOffset;
+			/* If BufferHandle has not been allocated on the heap, CurrNodePtr here points
+			   to the end of the allocated nodes list.
+			 */
+
+		}
+		/* Find the node that best fits the requested buffer size */
+		FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
+		PrevNodeOffset = FreedNodeOffset;
+		BestFitNodeOffset = 0;
+		BestFitPrevNodeOffset = 0;
+		while (FreedNodeOffset != 0) {
+			FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+			if (FreedNodePtr->BufferSize >= (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
+				if (BestFitNodeOffset == 0) {
+					/* First node that fits the requested buffer size */
+					BestFitNodeOffset = FreedNodeOffset;
+					BestFitPrevNodeOffset = PrevNodeOffset;
+				} else {
+					/* Find out whether current node is a better fit than the previous nodes */
+					BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
+					if (BestFitNodePtr->BufferSize > FreedNodePtr->BufferSize) {
+						BestFitNodeOffset = FreedNodeOffset;
+						BestFitPrevNodeOffset = PrevNodeOffset;
+					}
+				}
+			}
+			PrevNodeOffset = FreedNodeOffset;
+			FreedNodeOffset = FreedNodePtr->NextNodeOffset;
+		} /* end of while loop */
+
+
+		if (BestFitNodeOffset == 0) {
+			/* If we could not find a node that fits the requested buffer */
+			/* size, return AGESA_BOUNDS_CHK */
+			return AGESA_BOUNDS_CHK;
+		} else {
+			BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
+			BestFitPrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitPrevNodeOffset);
+
+			/* If BestFitNode is larger than the requested buffer, fragment the node further */
+			if (BestFitNodePtr->BufferSize > (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
+				NextFreeOffset = BestFitNodeOffset + AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE);
+
+				NextFreePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextFreeOffset);
+				NextFreePtr->BufferSize = BestFitNodePtr->BufferSize - (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE));
+				NextFreePtr->NextNodeOffset = BestFitNodePtr->NextNodeOffset;
+			} else {
+				/* Otherwise, next free node is NextNodeOffset of BestFitNode */
+				NextFreeOffset = BestFitNodePtr->NextNodeOffset;
+			}
+
+			/* If BestFitNode is the first buffer in the list, then update
+			   StartOfFreedNodes to reflect the new free node
+			 */
+			if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) {
+				BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset;
+			} else {
+				BestFitPrevNodePtr->NextNodeOffset = NextFreeOffset;
+			}
+
+			/* Add BestFitNode to the list of Allocated nodes */
+			CurrNodePtr->NextNodeOffset = BestFitNodeOffset;
+			BestFitNodePtr->BufferSize = AllocParams->BufferLength;
+			BestFitNodePtr->BufferHandle = AllocParams->BufferHandle;
+			BestFitNodePtr->NextNodeOffset = 0;
+
+			/* Remove BestFitNode from list of Freed nodes */
+			AllocParams->BufferPointer = (UINT8 *) BestFitNodePtr + sizeof (BIOS_BUFFER_NODE);
+		}
+	}
+
+	return AGESA_SUCCESS;
+}
+
+AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+
+	UINT8               *BiosHeapBaseAddr;
+	UINT32              AllocNodeOffset;
+	UINT32              PrevNodeOffset;
+	UINT32              NextNodeOffset;
+	UINT32              FreedNodeOffset;
+	UINT32              EndNodeOffset;
+	BIOS_BUFFER_NODE   *AllocNodePtr;
+	BIOS_BUFFER_NODE   *PrevNodePtr;
+	BIOS_BUFFER_NODE   *FreedNodePtr;
+	BIOS_BUFFER_NODE   *NextNodePtr;
+	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
+	AGESA_BUFFER_PARAMS *AllocParams;
+
+	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+	AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
+
+	/* Find target node to deallocate in list of allocated nodes.
+	   Return AGESA_BOUNDS_CHK if the BufferHandle is not found
+	 */
+	AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+	AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+	PrevNodeOffset = AllocNodeOffset;
+
+	while (AllocNodePtr->BufferHandle !=  AllocParams->BufferHandle) {
+		if (AllocNodePtr->NextNodeOffset == 0) {
+			return AGESA_BOUNDS_CHK;
+		}
+		PrevNodeOffset = AllocNodeOffset;
+		AllocNodeOffset = AllocNodePtr->NextNodeOffset;
+		AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+	}
+
+	/* Remove target node from list of allocated nodes */
+	PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
+	PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
+
+	/* Zero out the buffer, and clear the BufferHandle */
+	LibAmdMemFill ((UINT8 *)AllocNodePtr + sizeof (BIOS_BUFFER_NODE), 0, AllocNodePtr->BufferSize, &(AllocParams->StdHeader));
+	AllocNodePtr->BufferHandle = 0;
+	AllocNodePtr->BufferSize += sizeof (BIOS_BUFFER_NODE);
+
+	/* Add deallocated node in order to the list of freed nodes */
+	FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
+	FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+
+	EndNodeOffset = AllocNodeOffset + AllocNodePtr->BufferSize;
+
+	if (AllocNodeOffset < FreedNodeOffset) {
+		/* Add to the start of the freed list */
+		if (EndNodeOffset == FreedNodeOffset) {
+			/* If the freed node is adjacent to the first node in the list, concatenate both nodes */
+			AllocNodePtr->BufferSize += FreedNodePtr->BufferSize;
+			AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset;
+
+			/* Clear the BufferSize and NextNodeOffset of the previous first node */
+			FreedNodePtr->BufferSize = 0;
+			FreedNodePtr->NextNodeOffset = 0;
+
+		} else {
+			/* Otherwise, add freed node to the start of the list
+			   Update NextNodeOffset and BufferSize to include the
+			   size of BIOS_BUFFER_NODE
+			 */
+			AllocNodePtr->NextNodeOffset = FreedNodeOffset;
+		}
+		/* Update StartOfFreedNodes to the new first node */
+		BiosHeapBasePtr->StartOfFreedNodes = AllocNodeOffset;
+	} else {
+		/* Traverse list of freed nodes to find where the deallocated node
+		   should be place
+		 */
+		NextNodeOffset = FreedNodeOffset;
+		NextNodePtr = FreedNodePtr;
+		while (AllocNodeOffset > NextNodeOffset) {
+			PrevNodeOffset = NextNodeOffset;
+			if (NextNodePtr->NextNodeOffset == 0) {
+				break;
+			}
+			NextNodeOffset = NextNodePtr->NextNodeOffset;
+			NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
+		}
+
+		/* If deallocated node is adjacent to the next node,
+		   concatenate both nodes
+		 */
+		if (NextNodeOffset == EndNodeOffset) {
+			NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
+			AllocNodePtr->BufferSize += NextNodePtr->BufferSize;
+			AllocNodePtr->NextNodeOffset = NextNodePtr->NextNodeOffset;
+
+			NextNodePtr->BufferSize = 0;
+			NextNodePtr->NextNodeOffset = 0;
+		} else {
+			/*AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset; */
+			AllocNodePtr->NextNodeOffset = NextNodeOffset;
+		}
+		/* If deallocated node is adjacent to the previous node,
+		   concatenate both nodes
+		 */
+		PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
+		EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize;
+		if (AllocNodeOffset == EndNodeOffset) {
+			PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
+			PrevNodePtr->BufferSize += AllocNodePtr->BufferSize;
+
+			AllocNodePtr->BufferSize = 0;
+			AllocNodePtr->NextNodeOffset = 0;
+		} else {
+			PrevNodePtr->NextNodeOffset = AllocNodeOffset;
+		}
+	}
+	return AGESA_SUCCESS;
+}
+
+AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	UINT32              AllocNodeOffset;
+	UINT8               *BiosHeapBaseAddr;
+	BIOS_BUFFER_NODE   *AllocNodePtr;
+	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
+	AGESA_BUFFER_PARAMS *AllocParams;
+
+	AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
+
+	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+	AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+	AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+
+	while (AllocParams->BufferHandle != AllocNodePtr->BufferHandle) {
+		if (AllocNodePtr->NextNodeOffset == 0) {
+			AllocParams->BufferPointer = NULL;
+			AllocParams->BufferLength = 0;
+			return AGESA_BOUNDS_CHK;
+		} else {
+			AllocNodeOffset = AllocNodePtr->NextNodeOffset;
+			AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+		}
+	}
+
+	AllocParams->BufferPointer = (UINT8 *) ((UINT8 *) AllocNodePtr + sizeof (BIOS_BUFFER_NODE));
+	AllocParams->BufferLength = AllocNodePtr->BufferSize;
+
+	return AGESA_SUCCESS;
+
+}
+
+AGESA_STATUS BiosRunFuncOnAp (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS        Status;
+
+	Status = agesawrapper_amdlaterunaptask (Data, ConfigPtr);
+	return Status;
+}
+
+AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS        Status;
+	UINT8                 Value;
+	UINTN               ResetType;
+	AMD_CONFIG_PARAMS   *StdHeader;
+
+	ResetType = Data;
+	StdHeader = ConfigPtr;
+
+	//
+	// Perform the RESET based upon the ResetType. In case of
+	// WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to
+	// AmdResetManager. During the critical condition, where reset is required
+	// immediately, the reset will be invoked directly by writing 0x04 to port
+	// 0xCF9 (Reset Port).
+	//
+	switch (ResetType) {
+		case WARM_RESET_WHENEVER:
+		case COLD_RESET_WHENEVER:
+			break;
+
+		case WARM_RESET_IMMEDIATELY:
+		case COLD_RESET_IMMEDIATELY:
+			Value = 0x06;
+			LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader);
+			break;
+
+		default:
+			break;
+	}
+
+	Status = 0;
+	return Status;
+}
+
+AGESA_STATUS BiosReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS Status;
+	Status = AmdMemoryReadSPD (Func, Data, ConfigPtr);
+
+	return Status;
+}
+
+AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_UNSUPPORTED;
+}
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_SUCCESS;
+}
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_SUCCESS;
+}
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+	return AGESA_SUCCESS;
+}
+
diff --git a/src/mainboard/tyan/s8226/BiosCallOuts.h b/src/mainboard/tyan/s8226/BiosCallOuts.h
new file mode 100644
index 0000000..24a05fb
--- /dev/null
+++ b/src/mainboard/tyan/s8226/BiosCallOuts.h
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef _BIOS_CALLOUT_H_
+#define _BIOS_CALLOUT_H_
+
+#include "Porting.h"
+#include "AGESA.h"
+
+#define REQUIRED_CALLOUTS		12
+#define BIOS_HEAP_START_ADDRESS		0x00010000
+#define BIOS_HEAP_SIZE			0x20000   /* 64MB */
+
+typedef struct _BIOS_HEAP_MANAGER {
+	//UINT32 AvailableSize;
+	UINT32 StartOfAllocatedNodes;
+	UINT32 StartOfFreedNodes;
+} BIOS_HEAP_MANAGER;
+
+typedef struct _BIOS_BUFFER_NODE {
+	UINT32 BufferHandle;
+	UINT32 BufferSize;
+	UINT32 NextNodeOffset;
+} BIOS_BUFFER_NODE;
+
+/*
+ * CALLOUTS
+ */
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/* REQUIRED CALLOUTS
+ * AGESA ADVANCED CALLOUTS - CPU
+ */
+AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosRunFuncOnAp (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+AGESA_STATUS BiosGetIdsInitData (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/* AGESA ADVANCED CALLOUTS - MEMORY */
+AGESA_STATUS BiosReadSpd (UINT32  Func,UINT32  Data,VOID *ConfigPtr);
+
+/* BIOS DEFAULT RET */
+AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+/*  Call the host environment interface to provide a user hook opportunity. */
+AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+#define SB_GPIO_REG02   2
+#define SB_GPIO_REG09   9
+#define SB_GPIO_REG10   10
+#define SB_GPIO_REG15   15
+#define SB_GPIO_REG17   17
+#define SB_GPIO_REG21   21
+#define SB_GPIO_REG25   25
+#define SB_GPIO_REG28   28
+#endif //_BIOS_CALLOUT_H_
+
diff --git a/src/mainboard/tyan/s8226/Kconfig b/src/mainboard/tyan/s8226/Kconfig
new file mode 100644
index 0000000..c2fbe9b
--- /dev/null
+++ b/src/mainboard/tyan/s8226/Kconfig
@@ -0,0 +1,127 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+if BOARD_TYAN_S8226
+
+config BOARD_SPECIFIC_OPTIONS
+	def_bool y
+	select ARCH_X86
+	select CPU_AMD_AGESA_FAMILY15
+	select CPU_AMD_SOCKET_C32
+	select NORTHBRIDGE_AMD_AGESA_FAMILY15_ROOT_COMPLEX
+	select NORTHBRIDGE_AMD_AGESA_FAMILY15
+	select NORTHBRIDGE_AMD_CIMX_RD890
+	select SOUTHBRIDGE_AMD_CIMX_SB700
+	select SUPERIO_WINBOND_W83627DHG
+	select SUPERIO_NUVOTON_WPCM450
+	select DRIVERS_I2C_W83795
+	select UDELAY_TSC
+	select BOARD_HAS_FADT
+	select HAVE_BUS_CONFIG
+	select HAVE_OPTION_TABLE
+	select HAVE_PIRQ_TABLE
+	select HAVE_MP_TABLE
+	select HAVE_HARD_RESET
+	select SERIAL_CPU_INIT
+	select HAVE_ACPI_TABLES
+	select BOARD_ROMSIZE_KB_4096
+	select TINY_BOOTBLOCK
+	#select MMCONF_SUPPORT_DEFAULT #TODO enable it to resolve Multicore IO conflict
+
+config MAINBOARD_DIR
+	string
+	default tyan/s8226
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "S8226"
+
+config HW_MEM_HOLE_SIZEK
+	hex
+	default 0x200000
+
+config MAX_CPUS
+	int
+	default 64
+
+config MAX_PHYSICAL_CPUS
+	int
+	default 16
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+	bool
+	default n
+
+config MEM_TRAIN_SEQ
+	int
+	default 2
+
+config IRQ_SLOT_COUNT
+	int
+	default 11
+
+config RAMTOP
+	hex
+	default 0x1000000
+
+config HEAP_SIZE
+	hex
+	default 0xc0000
+
+config STACK_SIZE
+	hex
+	default 0x10000
+
+config ACPI_SSDTX_NUM
+	int
+	default 0
+
+config RAMBASE
+	hex
+	default 0x200000
+
+config SIO_PORT
+	hex
+	default 0x164E
+	help
+		though UARTs are on the NUVOTON BMC, port 0x164E
+		PS2 keyboard and mouse are on SUPERIO_WINBOND_W83627DHG, port 0x2E
+
+config DRIVERS_PS2_KEYBOARD
+	bool
+	default y
+
+config WARNINGS_ARE_ERRORS
+	bool
+	default n
+
+config ONBOARD_VGA_IS_PRIMARY
+	bool
+	default y
+
+config VGA_BIOS
+	bool
+	default n
+
+config VGA_BIOS_ID
+	string
+	depends on VGA_BIOS
+	default "1a03,2000"
+
+endif # BOARD_TYAN_S8226
diff --git a/src/mainboard/tyan/s8226/Makefile.inc b/src/mainboard/tyan/s8226/Makefile.inc
new file mode 100644
index 0000000..d49289b
--- /dev/null
+++ b/src/mainboard/tyan/s8226/Makefile.inc
@@ -0,0 +1,45 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+romstage-$(CONFIG_NORTHBRIDGE_AMD_CIMX_RD890) += rd890_cfg.c
+romstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += sb700_cfg.c
+romstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += reset.c
+romstage-y += buildOpts.c
+romstage-y += agesawrapper.c
+romstage-y += dimmSpd.c
+romstage-y += BiosCallOuts.c
+romstage-y += platform_oem.c
+
+ramstage-$(CONFIG_NORTHBRIDGE_AMD_CIMX_RD890) += rd890_cfg.c
+ramstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += sb700_cfg.c
+ramstage-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += reset.c
+ramstage-y += buildOpts.c
+ramstage-y += agesawrapper.c
+ramstage-y += dimmSpd.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += platform_oem.c
+
+AGESA_PREFIX ?= $(src)/vendorcode/amd/agesa
+CIMX_PREFIX ?= $(src)/vendorcode/amd/cimx
+AGESA_ROOT ?= $(AGESA_PREFIX)/f15
+NB_CIMX_ROOT ?= $(CIMX_PREFIX)/rd890
+SB_CIMX_ROOT ?= $(CIMX_PREFIX)/sb700
+
+subdirs-y += ../../../../$(AGESA_ROOT)
+
diff --git a/src/mainboard/tyan/s8226/OptionsIds.h b/src/mainboard/tyan/s8226/OptionsIds.h
new file mode 100644
index 0000000..0784e7f
--- /dev/null
+++ b/src/mainboard/tyan/s8226/OptionsIds.h
@@ -0,0 +1,67 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 12067 $   @e \$Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $
+ */
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ *  This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ *    IDSOPT_IDS_ENABLED
+ *    IDSOPT_ERROR_TRAP_ENABLED
+ *    IDSOPT_CONTROL_ENABLED
+ *    IDSOPT_TRACING_ENABLED
+ *    IDSOPT_PERF_ANALYSIS
+ *    IDSOPT_ASSERT_ENABLED
+ *    IDS_DEBUG_PORT
+ *    IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ *
+ **/
+
+#define IDSOPT_IDS_ENABLED     TRUE
+//#define IDSOPT_CONTROL_ENABLED TRUE
+//#define IDSOPT_TRACING_ENABLED TRUE
+//#define IDSOPT_PERF_ANALYSIS   TRUE
+#define IDSOPT_ASSERT_ENABLED  TRUE
+//#define CONFIG_REDIRECT_IDS_HDT_CONSOLE_TO_SERIAL TRUE
+//#undef IDSOPT_DEBUG_ENABLED
+//#define IDSOPT_DEBUG_ENABLED  FALSE
+//#undef IDSOPT_HOST_SIMNOW
+//#define IDSOPT_HOST_SIMNOW    FALSE
+//#undef IDSOPT_HOST_HDT
+//#define IDSOPT_HOST_HDT       FALSE
+//#define IDS_DEBUG_PORT    0x80
+
+#endif
diff --git a/src/mainboard/tyan/s8226/acpi/ide.asl b/src/mainboard/tyan/s8226/acpi/ide.asl
new file mode 100644
index 0000000..c79c18c
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/ide.asl
@@ -0,0 +1,244 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(IDEC) {
+			Name(_ADR, 0x00140001)
+			#include "ide.asl"
+		}
+	}
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){ /* Udma timing table */
+	120, 90, 60, 45, 30, 20, 15, 0	/* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){ /* MWDma timing table */
+	480, 150, 120, 0	/* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){ /* Pio timing table */
+	600, 390, 270, 180, 120, 0	/* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){ /* MWDma timing register table */
+	0x77, 0x21, 0x20, 0xFF	/* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+	0x99, 0x47, 0x34, 0x22, 0x20, 0x99	/* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+	Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+	PPTS, 8,	/* Primary PIO Slave Timing */
+	PPTM, 8,	/* Primary PIO Master Timing */
+	OFFSET(0x04), PMTS, 8,	/* Primary MWDMA Slave Timing */
+	PMTM, 8,	/* Primary MWDMA Master Timing */
+	OFFSET(0x08), PPCR, 8,	/* Primary PIO Control */
+	OFFSET(0x0A), PPMM, 4,	/* Primary PIO master Mode */
+	PPSM, 4,	/* Primary PIO slave Mode */
+	OFFSET(0x14), PDCR, 2,	/* Primary UDMA Control */
+	OFFSET(0x16), PDMM, 4,	/* Primary UltraDMA Mode */
+	PDSM, 4,	/* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1) /* get total time*/
+{
+	Store(And(Arg0, 0x0F), Local0)	/* Recovery Width */
+	Increment(Local0)
+	Store(ShiftRight(Arg0, 4), Local1)	/* Command Width */
+	Increment(Local1)
+	Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+	Name (_ADR, Zero)
+	Method(_GTM, 0)
+	{
+		NAME(OTBF, Buffer(20) { /* out buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(OTBF, 0, PSD0)   /* PIO spd0 */
+		CreateDwordField(OTBF, 4, DSD0)   /* DMA spd0 */
+		CreateDwordField(OTBF, 8, PSD1)   /* PIO spd1 */
+		CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+		/* Just return if the channel is disabled */
+		If(And(PPCR, 0x01)) { /* primary PIO control */
+			Return(OTBF)
+		}
+
+		/* Always tell them independent timing available and IOChannelReady used on both drives */
+		Or(BFFG, 0x1A, BFFG)
+
+		Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming  to PIO spd0 */
+		Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing  to PIO spd1 */
+
+		If(And(PDCR, 0x01)) {	/* It's under UDMA mode */
+			Or(BFFG, 0x01, BFFG)
+			Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+		}
+		Else {
+			Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing,  DmaSpd0 */
+		}
+
+		If(And(PDCR, 0x02)) {	/* It's under UDMA mode */
+			Or(BFFG, 0x04, BFFG)
+			Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+		}
+		Else {
+			Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing,  DmaSpd0 */
+		}
+
+		Return(OTBF) /* out buffer */
+	}				/* End Method(_GTM) */
+
+	Method(_STM, 3, NotSerialized)
+	{
+		NAME(INBF, Buffer(20) { /* in buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(INBF, 0, PSD0)    /* PIO spd0 */
+		CreateDwordField(INBF, 4, DSD0)   /* PIO spd0 */
+		CreateDwordField(INBF, 8, PSD1)   /* PIO spd1 */
+		CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+		Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+		Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
+		Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+		Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
+
+		Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+		Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+		If(And(BFFG, 0x01)) {	/* Drive 0 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDMM,)
+			Or(PDCR, 0x01, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTM)
+			}
+		}
+
+		If(And(BFFG, 0x04)) {	/* Drive 1 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDSM,)
+			Or(PDCR, 0x02, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTS)
+			}
+		}
+		/* Return(INBF) */
+	}		/*End Method(_STM) */
+	Device(MST)
+	{
+		Name(_ADR, 0)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xA0, CMDA)
+			Store(0xA0, CMDB)
+			Store(0xA0, CMDC)
+
+			Or(PPMM, 0x08, POMD)
+
+			If(And(PDCR, 0x01)) {
+				Or(PDMM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTM),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}		/* End Device(MST) */
+
+	Device(SLAV)
+	{
+		Name(_ADR, 1)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xB0, CMDA)
+			Store(0xB0, CMDB)
+			Store(0xB0, CMDC)
+
+			Or(PPSM, 0x08, POMD)
+
+			If(And(PDCR, 0x02)) {
+				Or(PDSM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTS),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}			/* End Device(SLAV) */
+}
diff --git a/src/mainboard/tyan/s8226/acpi/routing.asl b/src/mainboard/tyan/s8226/acpi/routing.asl
new file mode 100644
index 0000000..8bc06f6
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/routing.asl
@@ -0,0 +1,222 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "routing.asl"
+	}
+*/
+
+/* Routing is in System Bus scope */
+Scope(\_SB) {
+	Name(PR0, Package(){
+		/* NB devices */
+		/* Bus 0, Dev 0 - SR5650 HT */
+		Package() { 0xFFFF, Zero, INTA, Zero },
+
+		/* Bus 0, Dev 1 - CLKCONFIG */
+
+		/* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot */
+		Package() {0x0002FFFF, 0, INTE, 0 },
+
+		/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+
+		/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+		Package() {0x0004FFFF, 0, INTE, 0 },
+
+		/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+
+		/* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
+
+		/* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
+
+		/* Bus 0, Dev 8 - Southbridge port (normally hidden) */
+
+		/* Bus 0, Dev 9 - PCIe Bridge */
+
+		/* Bus 0, Dev a - PCIe Bridge */
+
+		/* Bus 0, Dev b - PCIe Bridge */
+		Package() {0x000BFFFF, 0, INTG, 0 },
+
+		/* Bus 0, Dev c - PCIe Bridge */
+		Package() {0x000CFFFF, 0, INTG, 0 },
+
+		/* Bus 0, Dev d - PCIe Bridge for Intel 82576 Giga NIC*/
+		Package() {0x000DFFFF, 0, INTG, 0 },
+
+		/* SB devices */
+		/* Bus 0, Dev 17 - SATA controller */
+		Package() {0x0011FFFF, 0, INTG, 0 },
+
+		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+		 * EHCI, dev 18, 19 func 2 */
+		Package() {0x0012FFFF, 0, INTA, 0 },
+		Package() {0x0012FFFF, 1, INTB, 0 },
+		Package() {0x0012FFFF, 2, INTC, 0 },
+		Package() {0x0012FFFF, 3, INTD, 0 },
+
+		Package() {0x0013FFFF, 0, INTC, 0 },
+		Package() {0x0013FFFF, 1, INTD, 0 },
+		Package() {0x0013FFFF, 2, INTA, 0 },
+		Package() {0x0013FFFF, 2, INTB, 0 },
+
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
+		Package(){0x0014FFFF, 0, INTA, 0 },
+		Package(){0x0014FFFF, 1, INTB, 0 },
+		Package(){0x0014FFFF, 2, INTC, 0 },
+		Package(){0x0014FFFF, 3, INTD, 0 },
+	})
+
+	Name(APR0, Package(){
+		/* NB devices in APIC mode */
+		/* Bus 0, Dev 0 - SR5650 HT */
+		Package() { 0xFFFF, Zero, Zero, 16 },
+
+		/* Bus 0, Dev 1 - CLKCONFIG */
+
+		/* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot (GFX0) */
+		Package() {0x0002FFFF, 0, 0, 0x34 },
+
+		/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+
+		/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+		Package() {0x0004FFFF, 0, 0, 0x34 },
+
+		/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+
+		/* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
+
+		/* Bus 0, Dev 7 - PCIe Bridge */
+
+		/* Bus 0, Dev 8 - Southbridge port (normally hidden) */
+
+		/* Bus 0, Dev 9 - PCIe Bridge */
+
+		/* Bus 0, Dev A - PCIe Bridge */
+
+		/* Bus 0, Dev B - PCIe Bridge */
+		Package() {0x000BFFFF, 0, 0, 0x36 },
+
+		/* Bus 0, Dev C - PCIe Bridge */
+		Package() {0x000CFFFF, 0, 0, 0x36 },
+
+		/* Bus 0, Dev D - PCIe Bridge For Intel 82576 Giga NIC*/
+		Package() {0x000DFFFF, 0, 0, 0x36 },
+
+		/* SB devices in APIC mode */
+		/* Bus 0, Dev 17 - SATA controller */
+		Package() {0x0011FFFF, 0, 0, 0x16 },
+
+		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+		 * EHCI, dev 18, 19 func 2 */
+		Package( ){0x0012FFFF, 0, 0, 16 },
+		Package() {0x0012FFFF, 1, 0, 17 },
+		Package() {0x0012FFFF, 2, 0, 18 },
+		Package() {0x0012FFFF, 3, 0, 19 },
+
+		Package() {0x0013FFFF, 0, 0, 18 },
+		Package() {0x0013FFFF, 1, 0, 19 },
+		Package() {0x0013FFFF, 2, 0, 16 },
+		Package() {0x0013FFFF, 3, 0, 17 },
+
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+		Package() {0x0014FFFF, 0, 0, 16 },
+		Package() {0x0014FFFF, 1, 0, 17 },
+		Package() {0x0014FFFF, 2, 0, 18 },
+		Package() {0x0014FFFF, 3, 0, 19 },
+	})
+
+	Name(PS2, Package(){
+		/* The external GFX - Hooked to PCIe slot 4 */
+		Package() {0x0000FFFF, 0, INTC, 0 },
+		Package() {0x0000FFFF, 1, INTD, 0 },
+		Package() {0x0000FFFF, 2, INTA, 0 },
+		Package() {0x0000FFFF, 3, INTB, 0 },
+	})
+	Name(APS2, Package(){
+		/* The external GFX - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, 0, 0x18 },
+		Package(){0x0000FFFF, 1, 0, 0x19 },
+		Package(){0x0000FFFF, 2, 0, 0x1A },
+		Package(){0x0000FFFF, 3, 0, 0x1B },
+	})
+
+	Name(PS4, Package(){
+		/* PCIe slot - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, INTA, 0 },
+		Package(){0x0000FFFF, 1, INTB, 0 },
+		Package(){0x0000FFFF, 2, INTC, 0 },
+		Package(){0x0000FFFF, 3, INTD, 0 },
+	})
+	Name(APS4, Package(){
+		/* PCIe slot - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, 0, 0x2C },
+		Package(){0x0000FFFF, 1, 0, 0x2D },
+		Package(){0x0000FFFF, 2, 0, 0x2E },
+		Package(){0x0000FFFF, 3, 0, 0x2F },
+	})
+
+	Name(PSb, Package(){
+		/* PCIe slot - Hooked to PCIe slot 11 */
+		Package(){0x0000FFFF, 0, INTD, 0 },
+		Package(){0x0000FFFF, 1, INTA, 0 },
+		Package(){0x0000FFFF, 2, INTB, 0 },
+		Package(){0x0000FFFF, 3, INTC, 0 },
+	})
+	Name(APSb, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 0x20 },
+		Package(){0x0000FFFF, 1, 0, 0x21 },
+		Package(){0x0000FFFF, 2, 0, 0x22 },
+		Package(){0x0000FFFF, 3, 0, 0x23 },
+	})
+
+	Name(PSc, Package(){
+		/* PCIe slot - Hooked to PCIe slot 12 */
+		Package(){0x0000FFFF, 0, INTA, 0 },
+		Package(){0x0000FFFF, 1, INTB, 0 },
+		Package(){0x0000FFFF, 2, INTC, 0 },
+		Package(){0x0000FFFF, 3, INTD, 0 },
+	})
+	Name(APSc, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 0x24 },
+		Package(){0x0000FFFF, 1, 0, 0x25 },
+		Package(){0x0000FFFF, 2, 0, 0x26 },
+		Package(){0x0000FFFF, 3, 0, 0x27 },
+	})
+
+	Name(PSd, Package(){
+		/* PCIe slot - Hooked to PCIe slot 13 */
+		Package(){0x0000FFFF, 0, INTB, 0 },
+		Package(){0x0000FFFF, 1, INTC, 0 },
+		Package(){0x0000FFFF, 2, INTD, 0 },
+		Package(){0x0000FFFF, 3, INTA, 0 },
+	})
+	Name(APSd, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 0x28 },
+		Package(){0x0000FFFF, 1, 0, 0x29 },
+		Package(){0x0000FFFF, 2, 0, 0x2A },
+		Package(){0x0000FFFF, 3, 0, 0x2B },
+	})
+}
diff --git a/src/mainboard/tyan/s8226/acpi/sata.asl b/src/mainboard/tyan/s8226/acpi/sata.asl
new file mode 100644
index 0000000..bd4acf0
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/sata.asl
@@ -0,0 +1,149 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(SATA) {
+			Name(_ADR, 0x00110000)
+			#include "sata.asl"
+		}
+	}
+}
+*/
+
+Name(STTM, Buffer(20) {
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+	\_GPE._L1F()
+}
+
+Device(PMRY)
+{
+	Name(_ADR, 0)
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(PMST) {
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P0IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return  (0x00) /* sata is missing */
+			}
+		}
+	}/* end of PMST */
+
+	Device(PSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P1IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	}	/* end of PSLA */
+}   /* end of PMRY */
+
+
+Device(SEDY)
+{
+	Name(_ADR, 1)		/* IDE Scondary Channel */
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(SMST)
+	{
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P2IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SMST */
+
+	Device(SSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P3IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SSLA */
+}   /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+	Method(_L1F,0x0,NotSerialized) {
+		if (\_SB.P0PR) {
+			if (LGreater(\_SB.P0IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P0PR)
+		}
+
+		if (\_SB.P1PR) {
+			if (LGreater(\_SB.P1IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P1PR)
+		}
+
+		if (\_SB.P2PR) {
+			if (LGreater(\_SB.P2IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P2PR)
+		}
+
+		if (\_SB.P3PR) {
+			if (LGreater(\_SB.P3IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P3PR)
+		}
+	}
+}
diff --git a/src/mainboard/tyan/s8226/acpi/usb.asl b/src/mainboard/tyan/s8226/acpi/usb.asl
new file mode 100644
index 0000000..81ea9a2
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi/usb.asl
@@ -0,0 +1,161 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "usb.asl"
+	}
+*/
+Method(UCOC, 0) {
+	Sleep(20)
+	Store(0x13,CMTI)
+	Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+	Scope (\_GPE) {
+		Method (_L13) {
+			UCOC()
+			if(LEqual(GPB0,PLC0)) {
+				Not(PLC0,PLC0)
+				Store(PLC0, \_SB.PT0D)
+			}
+		}
+	}
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+	Scope (\_GPE) {
+		Method (_L14) {
+			UCOC()
+			if (LEqual(GPB1,PLC1)) {
+				Not(PLC1,PLC1)
+				Store(PLC1, \_SB.PT1D)
+			}
+		}
+	}
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+	Scope (\_GPE) {
+		Method (_L15) {
+			UCOC()
+			if (LEqual(GPB2,PLC2)) {
+				Not(PLC2,PLC2)
+				Store(PLC2, \_SB.PT2D)
+			}
+		}
+	}
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+	Scope (\_GPE) {
+		Method (_L16) {
+			UCOC()
+			if (LEqual(GPB3,PLC3)) {
+				Not(PLC3,PLC3)
+				Store(PLC3, \_SB.PT3D)
+			}
+		}
+	}
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+	Scope (\_GPE) {
+		Method (_L19) {
+			UCOC()
+			if (LEqual(GPB4,PLC4)) {
+				Not(PLC4,PLC4)
+				Store(PLC4, \_SB.PT4D)
+			}
+		}
+	}
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+	Scope (\_GPE) {
+		Method (_L1A) {
+			UCOC()
+			if (LEqual(GPB5,PLC5)) {
+				Not(PLC5,PLC5)
+				Store(PLC5, \_SB.PT5D)
+			}
+		}
+	}
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1C) { */
+		Method (_L06) {
+			UCOC()
+			if (LEqual(GPB6,PLC6)) {
+				Not(PLC6,PLC6)
+				Store(PLC6, \_SB.PT6D)
+			}
+		}
+	}
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1D) { */
+		Method (_L07) {
+			UCOC()
+			if (LEqual(GPB7,PLC7)) {
+				Not(PLC7,PLC7)
+				Store(PLC7, \_SB.PT7D)
+			}
+		}
+	}
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+	Scope (\_GPE) {
+		Method (_L17) {
+			if (LEqual(G8IS,PLC8)) {
+				Not(PLC8,PLC8)
+				Store(PLC8, \_SB.PT8D)
+			}
+		}
+	}
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+	Scope (\_GPE) {
+		Method (_L0E) {
+			if (LEqual(G9IS,0)) {
+			Store(1,\_SB.PT9D)
+			}
+		}
+	}
+}
diff --git a/src/mainboard/tyan/s8226/acpi_tables.c b/src/mainboard/tyan/s8226/acpi_tables.c
new file mode 100644
index 0000000..3e8f014
--- /dev/null
+++ b/src/mainboard/tyan/s8226/acpi_tables.c
@@ -0,0 +1,319 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <arch/io.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+#include "agesawrapper.h"
+
+#define DUMP_ACPI_TABLES 0
+
+#if DUMP_ACPI_TABLES == 1
+static void dump_mem(u32 start, u32 end)
+{
+
+	u32 i;
+	print_debug("dump_mem:");
+	for (i = start; i < end; i++) {
+		if ((i & 0xf) == 0) {
+			printk(BIOS_DEBUG, "\n%08x:", i);
+		}
+		printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
+	}
+	print_debug("\n");
+}
+#endif
+
+extern const unsigned char AmlCode[];
+
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+	/* Just a dummy */
+	return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+	device_t dev;
+	u32 dword;
+	u32 gsi_base = 0;
+	u32 apicid_sp5100;
+	u32 apicid_sr5650;
+
+	/*
+	 * AGESA v5 Apply apic enumeration rules
+	 * For systems with >= 16 APICs, put the IO-APICs at 0..n and
+	 * put the local-APICs at m..z
+	 * For systems with < 16 APICs, put the Local-APICs at 0..n and
+	 * put the IO-APICs at (n + 1)..z
+	 */
+#if CONFIG_MAX_CPUS >= 16
+	apicid_sp5100 = 0x0;
+#else
+	apicid_sp5100 = CONFIG_MAX_CPUS + 1
+#endif
+		apicid_sr5650 = apicid_sp5100 + 1;
+
+	/* create all subtables for processors */
+	current = acpi_create_madt_lapics(current);
+
+	/* Write sp5100 IOAPIC, only one */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+			apicid_sp5100,
+			IO_APIC_ADDR,
+			0
+			);
+
+	/* IOAPIC on rs5690 */
+	gsi_base += IO_APIC_INTERRUPTS;  /* SP5100 has 24 IOAPIC entries. */
+	dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+	if (dev) {
+		pci_write_config32(dev, 0xF8, 0x1);
+		dword = pci_read_config32(dev, 0xFC) & 0xfffffff0;
+		current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+				apicid_sr5650,
+				dword,
+				gsi_base
+				);
+	}
+
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current,
+			0, //BUS
+			0, //SOURCE
+			2, //gsirq
+			0  //flags
+			);
+
+	/* 0: mean bus 0--->ISA */
+	/* 0: PIC 0 */
+	/* 2: APIC 2 */
+	/* 5 mean: 0101 --> Edige-triggered, Active high */
+
+	/* create all subtables for processors */
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0, 5, 1);
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 1, 5, 1);
+	/* 1: LINT1 connect to NMI */
+
+	return current;
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+	// Not implemented
+	return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+	/* No NUMA, no SRAT */
+	return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id)
+{
+	int lens;
+	msr_t msr;
+	char pscope[] = "\\_SB.PCI0";
+
+	lens = acpigen_write_scope(pscope);
+	msr = rdmsr(TOP_MEM);
+	lens += acpigen_write_name_dword("TOM1", msr.lo);
+	msr = rdmsr(TOP_MEM2);
+	/*
+	 * Since XP only implements parts of ACPI 2.0, we can't use a qword
+	 * here.
+	 * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt
+	 * slide 22ff.
+	 * Shift value right by 20 bit to make it fit into 32bit,
+	 * giving us 1MB granularity and a limit of almost 4Exabyte of memory.
+	 */
+	lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20);
+	acpigen_patch_len(lens - 1);
+	return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+	unsigned long current;
+	acpi_rsdp_t *rsdp;
+	acpi_rsdt_t *rsdt;
+	//acpi_hpet_t *hpet;
+	acpi_madt_t *madt;
+	acpi_srat_t *srat;
+	acpi_slit_t *slit;
+	acpi_fadt_t *fadt;
+	acpi_facs_t *facs;
+	acpi_header_t *dsdt;
+	acpi_header_t *ssdt;
+	acpi_header_t *ssdt2;
+	acpi_header_t *alib;
+
+	get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
+
+	/* Align ACPI tables to 16 bytes */
+	start = (start + 0x0f) & -0x10;
+	current = start;
+
+	printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
+
+	/* We need at least an RSDP and an RSDT Table */
+	rsdp = (acpi_rsdp_t *) current;
+	current += sizeof(acpi_rsdp_t);
+	rsdt = (acpi_rsdt_t *) current;
+	current += sizeof(acpi_rsdt_t);
+
+	/* clear all table memory */
+	memset((void *)start, 0, current - start);
+
+	acpi_write_rsdp(rsdp, rsdt, NULL);
+	acpi_write_rsdt(rsdt);
+
+	/* FACS */
+	printk(BIOS_DEBUG, "ACPI:    * FACS\n");
+	facs = (acpi_facs_t *) current;
+	current += sizeof(acpi_facs_t);
+	acpi_create_facs(facs);
+
+	/* DSDT */
+	printk(BIOS_DEBUG, "ACPI:    * DSDT\n");
+	dsdt = (acpi_header_t *)current;
+	memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
+	current += dsdt->length;
+	memcpy(dsdt, &AmlCode, dsdt->length);
+	printk(BIOS_DEBUG, "ACPI:    * DSDT @ %p Length %x\n", dsdt, dsdt->length);
+	/* FADT */
+	printk(BIOS_DEBUG, "ACPI:    * FADT\n");
+	fadt = (acpi_fadt_t *) current;
+	current += sizeof(acpi_fadt_t);
+
+	acpi_create_fadt(fadt, facs, dsdt);
+	acpi_add_table(rsdp, fadt);
+
+	/*
+	 * We explicitly add these tables later on:
+	 */
+#ifdef UNUSED_CODE // Don't need HPET table. we have one in dsdt
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * HPET at %lx\n", current);
+	hpet = (acpi_hpet_t *) current;
+	current += sizeof(acpi_hpet_t);
+	acpi_create_hpet(hpet);
+	acpi_add_table(rsdp, hpet);
+#endif
+
+	/* If we want to use HPET Timers Linux wants an MADT */
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * MADT at %lx\n",current);
+	madt = (acpi_madt_t *) current;
+	acpi_create_madt(madt);
+	current += madt->header.length;
+	acpi_add_table(rsdp, madt);
+
+	/* SRAT */
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * SRAT at %lx\n", current);
+	srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT);
+	if (srat != NULL) {
+		memcpy((void *)current, srat, srat->header.length);
+		srat = (acpi_srat_t *) current;
+		//acpi_create_srat(srat);
+		current += srat->header.length;
+		acpi_add_table(rsdp, srat);
+	}
+
+	/* SLIT */
+	current   = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:   * SLIT at %lx\n", current);
+	slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT);
+	if (slit != NULL) {
+		memcpy((void *)current, slit, slit->header.length);
+		slit = (acpi_slit_t *) current;
+		//acpi_create_slit(slit);
+		current += slit->header.length;
+		acpi_add_table(rsdp, slit);
+	}
+
+	/* SSDT */
+	current	 = (current + 0x0f) & -0x10;
+	printk(BIOS_DEBUG, "ACPI:  * AGESA ALIB SSDT at %lx\n", current);
+	alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB);
+	if (alib != NULL) {
+		memcpy((void *)current, alib, alib->length);
+		ssdt = (acpi_header_t *) current;
+		current += alib->length;
+		acpi_add_table(rsdp,alib);
+	} else {
+		printk(BIOS_DEBUG, "	AGESA ALIB SSDT table NULL. Skipping.\n");
+	}
+
+	/* The DSDT needs additional work for the AGESA SSDT Pstate table */
+	current	 = ( current + 0x0f) & -0x10;
+	printk(BIOS_DEBUG, "ACPI:  * AGESA SSDT Pstate at %lx\n", current);
+	ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE);
+	if (ssdt != NULL) {
+		memcpy((void *)current, ssdt, ssdt->length);
+		ssdt = (acpi_header_t *) current;
+		current += ssdt->length;
+		acpi_add_table(rsdp,ssdt);
+	} else {
+		printk(BIOS_DEBUG, "  AGESA SSDT table NULL. Skipping.\n");
+	}
+
+	current	 = ( current + 0x0f) & -0x10;
+	printk(BIOS_DEBUG, "ACPI:  * coreboot TOM SSDT2 at %lx\n", current);
+	ssdt2 = (acpi_header_t *) current;
+	acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR);
+	current += ssdt2->length;
+	acpi_add_table(rsdp,ssdt2);
+
+#if DUMP_ACPI_TABLES == 1
+	printk(BIOS_DEBUG, "rsdp\n");
+	dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+
+	printk(BIOS_DEBUG, "rsdt\n");
+	dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+
+	printk(BIOS_DEBUG, "madt\n");
+	dump_mem(madt, ((void *)madt) + madt->header.length);
+
+	printk(BIOS_DEBUG, "srat\n");
+	dump_mem(srat, ((void *)srat) + srat->header.length);
+
+	printk(BIOS_DEBUG, "slit\n");
+	dump_mem(slit, ((void *)slit) + slit->header.length);
+
+	printk(BIOS_DEBUG, "ssdt\n");
+	dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+
+	printk(BIOS_DEBUG, "fadt\n");
+	dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+#endif
+
+	printk(BIOS_INFO, "ACPI: done.\n");
+	return current;
+}
diff --git a/src/mainboard/tyan/s8226/agesawrapper.c b/src/mainboard/tyan/s8226/agesawrapper.c
new file mode 100644
index 0000000..1485354
--- /dev/null
+++ b/src/mainboard/tyan/s8226/agesawrapper.c
@@ -0,0 +1,1204 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include "agesawrapper.h"
+#include "BiosCallOuts.h"
+#include "cpuRegisters.h"
+#include "cpuCacheInit.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "Dispatcher.h"
+#include "cpuCacheInit.h"
+#include "amdlib.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include <cpuFamilyTranslation.h> /* CPU_SPECIFIC_SERVICES */
+
+#define FILECODE UNASSIGNED_FILE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* ACPI table pointers returned by AmdInitLate */
+VOID *DmiTable    = NULL;
+VOID *AcpiPstate  = NULL;
+VOID *AcpiSrat    = NULL;
+VOID *AcpiSlit    = NULL;
+
+VOID *AcpiWheaMce = NULL;
+VOID *AcpiWheaCmc = NULL;
+VOID *AcpiAlib    = NULL;
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+extern VOID OemCustomizeInitEarly(IN  OUT AMD_EARLY_PARAMS *InitEarly);
+
+static UINT32 agesawrapper_amdinitcpuio(VOID)
+{
+	AGESA_STATUS		Status;
+	UINT32			PciData;
+	PCI_ADDR		PciAddress;
+	AMD_CONFIG_PARAMS	StdHeader;
+	UINT32			nodes;
+	UINT32			node;
+	UINT32			sblink;
+	UINT32			i;
+	UINT32			TOM;
+
+	/* get the number of coherent nodes in the system */
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x60);
+	LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	nodes = ((PciData >> 4) & 7) + 1; //NodeCnt[2:0]
+
+	/* Find out the Link ID of Node0 that connects to the
+	 * Southbridge (system IO hub). e.g. family10 MCM Processor,
+	 * sbLink is Processor0 Link2, internal Node0 Link3
+	 */
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x64);
+	LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	sblink = (PciData >> 8) & 3; //assume ganged
+
+	/* Enable MMIO on AMD CPU Address Map Controller for all nodes */
+	for (node = 0; node < nodes; node++) {
+		/* clear all MMIO Mapped Base/Limit Registers */
+		for (i = 0; i < 8; i++) {
+			PciData = 0x00000000;
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x80 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x84 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		}
+
+		/* clear all IO Space Base/Limit Registers */
+		for (i = 0; i < 4; i++) {
+			PciData = 0x00000000;
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC4 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC0 + i*8);
+			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		}
+
+		/* Set VGA Ram MMIO 0000A0000-0000BFFFF to Node0 sbLink */
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x84);
+		PciData = 0x00000B00;
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x80);
+		PciData = 0x00000A03;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+		/* Set TOM1-FFFFFFFF to Node0 sbLink. */
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x8C);
+		PciData = 0x00FFFF00;
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		TOM = (UINT32)MsrRead(TOP_MEM);
+		PciData = (TOM >> 8) | 0x03;
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x88);
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+		/* Set MMCONF space to Node0 sbLink with NP set.
+		 * default E0000000-EFFFFFFF
+		 * Just have all mmio set to non-posted,
+		 * coreboot not implemente the range by range setting yet.
+		 */
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xBC);
+		PciData = CONFIG_MMCONF_BASE_ADDRESS + (CONFIG_MMCONF_BUS_NUMBER * 0x100000);//1MB each bus
+		PciData = (PciData >> 8) & 0xFFFFFF00;
+		PciData |= 0x80; //NP
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xB8);
+		PciData = (PCIE_BASE_ADDRESS >> 8) | 0x03;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+
+		/* Set PCIO: 0x0 - 0xFFF000 to Node0 sbLink  and enabled VGA IO*/
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC4);
+		PciData = 0x00FFF000;
+		PciData |= sblink << 4;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC0);
+		PciData = 0x00000033;
+		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	}
+
+	Status = AGESA_SUCCESS;
+	return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdinitmmio (
+	VOID
+	)
+{
+	AGESA_STATUS                  Status;
+	UINT64                        MsrReg;
+	UINT32                        PciData;
+	PCI_ADDR                      PciAddress;
+	AMD_CONFIG_PARAMS             StdHeader;
+
+	/*
+	  Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
+	  Address MSR register.
+	*/
+	MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
+	LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader);
+
+	/*
+	  Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
+	*/
+	LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader);
+	MsrReg = MsrReg | 0x0000400000000000;
+	LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
+
+	/* For serial port */
+	PciData = 0xFF03FFD5;
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44);
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* Set ROM cache onto WP to decrease post time */
+	MsrReg = (0x0100000000ull - CONFIG_ROM_SIZE) | 5ull;
+	LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader);
+	MsrReg = (0x1000000000000ull - CONFIG_ROM_SIZE) | 0x800ull;
+	LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader);
+
+	Status = AGESA_SUCCESS;
+	return (UINT32)Status;
+}
+
+UINT32 agesawrapper_amdinitreset(VOID)
+{
+	AGESA_STATUS status = AGESA_SUCCESS;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_RESET_PARAMS AmdResetParams;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	LibAmdMemFill(&AmdResetParams,
+			0,
+			sizeof(AMD_RESET_PARAMS),
+			&(AmdResetParams.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
+	AmdParamStruct.AllocationMethod = ByHost;
+	AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS);
+	AmdParamStruct.NewStructPtr = &AmdResetParams;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = NULL;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	AmdResetParams.HtConfig.Depth = 0;
+
+	//MARG34PI disabled AGESA_ENTRY_INIT_RESET by default
+	//but we need to call AmdCreateStruct to call HeapManagerInit, or the event log not work
+#if (defined AGESA_ENTRY_INIT_RESET) && (AGESA_ENTRY_INIT_RESET == TRUE)
+	status = AmdInitReset((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr);
+#endif
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct(&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitearly(VOID)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_EARLY_PARAMS     *AmdEarlyParamsPtr;
+	UINT32 TscRateInMhz;
+	CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+
+	AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr;
+	OemCustomizeInitEarly(AmdEarlyParamsPtr);
+
+	status = AmdInitEarly(AmdEarlyParamsPtr);
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+
+	GetCpuServicesOfCurrentCore((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &AmdParamStruct.StdHeader);
+	FamilySpecificServices->GetTscRate(FamilySpecificServices, &TscRateInMhz, &AmdParamStruct.StdHeader);
+	printk(BIOS_DEBUG, "BSP Frequency: %luMHz\n", TscRateInMhz);
+
+	AmdReleaseStruct(&AmdParamStruct);
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitpost(VOID)
+{
+	AGESA_STATUS status;
+	UINT16 i;
+	UINT32 *HeadPtr;
+	AMD_INTERFACE_PARAMS  AmdParamStruct;
+	AMD_POST_PARAMS *PostParams;
+	BIOS_HEAP_MANAGER    *BiosManagerPtr;
+	UINT32 TscRateInMhz;
+	CPU_SPECIFIC_SERVICES *FamilySpecificServices;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr;
+	status = AmdInitPost(PostParams);
+	if (status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus);
+	}
+	AmdReleaseStruct(&AmdParamStruct);
+
+	/* Initialize heap space */
+	BiosManagerPtr = (BIOS_HEAP_MANAGER *)BIOS_HEAP_START_ADDRESS;
+
+	HeadPtr = (UINT32 *) ((UINT8 *) BiosManagerPtr + sizeof(BIOS_HEAP_MANAGER));
+	for (i = 0; i < ((BIOS_HEAP_SIZE/4) - (sizeof(BIOS_HEAP_MANAGER)/4)); i++) {
+		*HeadPtr = 0x00000000;
+		HeadPtr++;
+	}
+	BiosManagerPtr->StartOfAllocatedNodes = 0;
+	BiosManagerPtr->StartOfFreedNodes = 0;
+
+	GetCpuServicesOfCurrentCore ((CONST CPU_SPECIFIC_SERVICES **)&FamilySpecificServices, &AmdParamStruct.StdHeader);
+	FamilySpecificServices->GetTscRate (FamilySpecificServices, &TscRateInMhz, &AmdParamStruct.StdHeader);
+	printk(BIOS_DEBUG, "BSP Frequency: %luMHz\n", TscRateInMhz);
+
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitenv(VOID)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_ENV_PARAMS *EnvParams;
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	EnvParams = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr;
+	status = AmdInitEnv(EnvParams);
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(EnvParams->StdHeader.HeapStatus);
+
+	AmdReleaseStruct(&AmdParamStruct);
+	return (UINT32)status;
+}
+
+VOID * agesawrapper_getlateinitptr(int pick)
+{
+	switch (pick) {
+		case PICK_DMI:
+			return DmiTable;
+
+		case PICK_PSTATE:
+			return AcpiPstate;
+
+		case PICK_SRAT:
+			return AcpiSrat;
+
+		case PICK_SLIT:
+			return AcpiSlit;
+		case PICK_WHEA_MCE:
+			return AcpiWheaMce;
+		case PICK_WHEA_CMC:
+			return AcpiWheaCmc;
+		case PICK_ALIB:
+			return AcpiAlib;
+		default:
+			return NULL;
+	}
+
+	return NULL;
+}
+
+UINT32 agesawrapper_amdinitmid(VOID)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+
+	/* Enable MMIO on AMD CPU Address Map Controller */
+	agesawrapper_amdinitcpuio();
+
+	LibAmdMemFill(&AmdParamStruct,
+			0,
+			sizeof(AMD_INTERFACE_PARAMS),
+			&(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	status = AmdCreateStruct(&AmdParamStruct);
+	if (status != AGESA_SUCCESS) {
+		return (UINT32)status;
+	}
+	status = AmdInitMid((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr);
+	if (status != AGESA_SUCCESS)
+		agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct(&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+UINT32 agesawrapper_amdinitlate(VOID)
+{
+	AGESA_STATUS		Status;
+	AMD_INTERFACE_PARAMS	AmdParamStruct;
+	AMD_LATE_PARAMS		*AmdLateParamsPtr;
+
+	LibAmdMemFill(&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	AmdCreateStruct (&AmdParamStruct);
+	AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr;
+
+	printk(BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr);
+
+	Status = AmdInitLate(AmdLateParamsPtr);
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdLateParamsPtr->StdHeader.HeapStatus);
+		ASSERT(Status == AGESA_SUCCESS);
+	}
+	DmiTable    = AmdLateParamsPtr->DmiTable;
+	AcpiPstate  = AmdLateParamsPtr->AcpiPState;
+	AcpiSrat    = AmdLateParamsPtr->AcpiSrat;
+	AcpiSlit    = AmdLateParamsPtr->AcpiSlit;
+	AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce;
+	AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc;
+	AcpiAlib    = AmdLateParamsPtr->AcpiAlib;
+
+	printk(BIOS_DEBUG, "In %s, AGESA generated ACPI tables:\n"
+		"   DmiTable:%p\n   AcpiPstate: %p\n   AcpiSrat:%p\n   AcpiSlit:%p\n"
+		"   Mce:%p\n   Cmc:%p\n   Alib:%p\n",
+		 __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit,
+		 AcpiWheaMce, AcpiWheaCmc, AcpiAlib);
+
+	/* Don't release the structure until coreboot has copied the ACPI tables.
+	 * AmdReleaseStruct (&AmdLateParams);
+	 */
+
+	return (UINT32)Status;
+}
+
+/**
+ * @param[in] UINTN ApicIdOfCore,
+ * @param[in] AP_EXE_PARAMS *LaunchApParams
+ */
+UINT32 agesawrapper_amdlaterunaptask(UINT32 Data, VOID *ConfigPtr)
+{
+	AGESA_STATUS Status;
+	AMD_LATE_PARAMS AmdLateParams;
+
+	LibAmdMemFill(&AmdLateParams,
+			0,
+			sizeof(AMD_LATE_PARAMS),
+			&(AmdLateParams.StdHeader));
+
+	AmdLateParams.StdHeader.AltImageBasePtr = 0;
+	AmdLateParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdLateParams.StdHeader.Func = 0;
+	AmdLateParams.StdHeader.ImageBasePtr = 0;
+	AmdLateParams.StdHeader.HeapStatus = HEAP_TEMP_MEM;
+
+	printk(BIOS_DEBUG, "AmdLateRunApTask on Core: %x\n", (uint32_t)Data);
+	Status = AmdLateRunApTask((AP_EXE_PARAMS *)ConfigPtr);
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdLateParams.StdHeader.HeapStatus);
+		ASSERT(Status <= AGESA_UNSUPPORTED);
+	}
+
+	return (UINT32)Status;
+}
+
+/**
+ *
+ */
+static void agesa_bound_check(EVENT_PARAMS *event)
+{
+	switch (event->EventInfo) {
+		case CPU_ERROR_HEAP_IS_FULL:
+			printk(BIOS_DEBUG, "Heap allocation for specified buffer handle failed as heap is full\n");
+			break;
+
+		case CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED:
+			printk(BIOS_DEBUG, "Allocation incomplete as buffer has previously been allocated\n");
+			break;
+
+		case CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT:
+			printk(BIOS_DEBUG, "Unable to locate buffer handle or deallocate heap as buffer handle cannot be located\n");
+			break;
+
+		case CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT:
+			printk(BIOS_DEBUG, "Unable to locate pointer to the heap buffer\n");
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_alert(EVENT_PARAMS *event)
+{
+	switch (event->EventInfo) {
+		case MEM_ALERT_USER_TMG_MODE_OVERRULED:
+			printk(BIOS_DEBUG, "Socket %lx Dct %lx Channel %lx "
+					"TIMING_MODE_SPECIFIC is requested but can not be applied to current configurations.\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case MEM_ALERT_ORG_MISMATCH_DIMM:
+			printk(BIOS_DEBUG, "Socket %lx Dct %lx Channel %lx "
+					"DIMM organization miss-match\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case MEM_ALERT_BK_INT_DIS:
+			printk(BIOS_DEBUG, "Socket %lx Dct %lx Channel %lx "
+					"Bank interleaving disable for internal issue\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case CPU_EVENT_BIST_ERROR:
+			printk(BIOS_DEBUG, "BIST error: %lx reported on Socket %lx Core %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_HW_SYNCFLOOD:
+			printk(BIOS_DEBUG, "HT_EVENT_DATA_HW_SYNCFLOOD error on Socket %lx Link %lx\n",
+					event->DataParam1,
+					event->DataParam2);
+			break;
+
+		case HT_EVENT_HW_HTCRC:
+			printk(BIOS_DEBUG, "HT_EVENT_HW_HTCRC error on Socket %lx Link %lx Lanemask:%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_warning(EVENT_PARAMS *event)
+{
+/*
+	if (event->EventInfo == CPU_EVENT_STACK_REENTRY) {
+		printk(BIOS_DEBUG,
+				"The stack has already been enabled and this is a
+				redundant invocation of AMD_ENABLE_STACK. There is no event logged and
+				no data values. The event sub-class is returned along with the status code\n");
+		return;
+	}
+*/
+
+	switch (event->EventInfo >> 24) {
+		case 0x04:
+			printk(BIOS_DEBUG, "Memory: Socket %lx Dct %lx Channel%lx ",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case 0x08:
+			printk(BIOS_DEBUG, "Processor: ");
+			break;
+
+		case 0x10:
+			printk(BIOS_DEBUG, "Hyper Transport: ");
+			break;
+
+		default:
+			break;
+	}
+
+	switch (event->EventInfo) {
+		case MEM_WARNING_UNSUPPORTED_QRDIMM:
+			printk(BIOS_DEBUG, "QR DIMMs detected but not supported\n");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_UDIMM:
+			printk(BIOS_DEBUG, "Unbuffered DIMMs detected but not supported\n");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_SODIMM:
+			printk(BIOS_DEBUG, "SO-DIMMs detected but not supported");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_X4DIMM:
+			printk(BIOS_DEBUG, "x4 DIMMs detected but not supported");
+			break;
+
+		case MEM_WARNING_UNSUPPORTED_RDIMM:
+			printk(BIOS_DEBUG, "Registered DIMMs detected but not supported");
+			break;
+
+/*
+		case MEM_WARNING_UNSUPPORTED_LRDIMM:
+			printk(BIOS_DEBUG, "Load Reduced DIMMs detected but not supported");
+			break;
+*/
+
+		case MEM_WARNING_NO_SPDTRC_FOUND:
+			printk(BIOS_DEBUG, "NO_SPDTRC_FOUND");
+			break;
+
+		case MEM_WARNING_EMP_NOT_SUPPORTED:
+			printk(BIOS_DEBUG, "Processor is not capable for EMP");//
+			break;
+
+		case MEM_WARNING_EMP_CONFLICT:
+			printk(BIOS_DEBUG, "EMP cannot be enabled if channel interleaving bank interleaving, or bank swizzle is enabled\n");//
+			break;
+
+		case MEM_WARNING_EMP_NOT_ENABLED:
+			printk(BIOS_DEBUG, "Memory size is not power of two\n");//
+			break;
+
+		case MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED:
+			printk(BIOS_DEBUG, "MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED\n");
+			break;
+
+		case MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED\n");
+			break;
+
+		case MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED\n");
+			break;
+
+		case MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED\n");
+			break;
+
+		case MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED:
+			printk(BIOS_DEBUG, "MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED\n");
+			break;
+
+/*
+		case MEM_WARNING_INITIAL_DDR3VOLT_NONZERO:
+			printk(BIOS_DEBUG, "MEM_WARNING_INITIAL_DDR3VOLT_NONZERO\n");
+			break;
+
+		case MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO:
+			printk(BIOS_DEBUG, "MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO\n");
+			break;
+*/
+
+		case CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR:
+			printk(BIOS_DEBUG, "Allocation rule number that has been violated:");
+			if ((event->EventInfo & 0x000000FF) == 0x01) {
+				printk(BIOS_DEBUG, "AGESA_CACHE_SIZE_REDUCED\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x02) {
+				printk(BIOS_DEBUG, "AGESA_CACHE_REGIONS_ACROSS_1MB\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x03) {
+				printk(BIOS_DEBUG, "AGESA_CACHE_REGIONS_ACROSS_4GB\n");
+			}
+			printk(BIOS_DEBUG, "cache region index:%lx, start:%lx size:%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case CPU_WARNING_ADJUSTED_LEVELING_MODE:
+			printk(BIOS_DEBUG, "CPU_WARNING_ADJUSTED_LEVELING_MODE "
+					"requested: %lx, actual level:%lx\n",
+					event->DataParam1,
+					event->DataParam2);
+			break;
+
+		case CPU_EVENT_PM_PSTATE_OVERCURRENT:
+			printk(BIOS_DEBUG, "CPU_EVENT_PM_PSTATE_OVERCURRENT "
+						"Socket: %lx, Pstate:%lx\n",
+						event->DataParam1,
+						event->DataParam2);
+			break;
+
+		case CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG:
+			printk(BIOS_DEBUG, "CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG\n");
+			break;
+
+/*
+		case CPU_EVENT_UNKNOWN_PROCESSOR_REVISION:
+			printk(BIOS_DEBUG, "CPU_EVENT_UNKNOWN_PROCESSOR_REVISION, socket: %lx, cpuid:%lx\n",
+				event->DataParam1,
+				event->DataParam2);
+			break;
+*/
+
+		case HT_EVENT_OPT_REQUIRED_CAP_RETRY:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_REQUIRED_CAP_RETRY, Socket %lx Link %lx Depth %lx\n",
+				event->DataParam1,
+				event->DataParam2,
+				event->DataParam3);
+			break;
+
+		case HT_EVENT_OPT_REQUIRED_CAP_GEN3:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_REQUIRED_CAP_GEN3, Socket %lx Link %lx Depth %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_OPT_UNUSED_LINKS:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_UNUSED_LINKS, SocketA%lx LinkA%lx SocketB%lx LinkB%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+			break;
+
+		case HT_EVENT_OPT_LINK_PAIR_EXCEED:
+			printk(BIOS_DEBUG, "HT_EVENT_OPT_LINK_PAIR_EXCEED, SocketA%lx MasterLink%lx SocketB%lx AltLink%lx\n",
+
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_error(EVENT_PARAMS *event)
+{
+
+	switch (event->EventInfo >> 24) {
+		case 0x04:
+			printk(BIOS_DEBUG, "Memory: Socket %lx Dct %lx Channel%lx ",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case 0x08:
+			printk(BIOS_DEBUG, "Processor: ");
+			break;
+
+		case 0x10:
+			printk(BIOS_DEBUG, "Hyper Transport: ");
+			break;
+
+		default:
+			break;
+	}
+
+	switch (event->EventInfo) {
+		case MEM_ERROR_NO_DQS_POS_RD_WINDOW:
+			printk(BIOS_DEBUG, "No DQS Position window for RD DQS\n");
+			break;
+
+		case MEM_ERROR_SMALL_DQS_POS_RD_WINDOW:
+			printk(BIOS_DEBUG, "Small DQS Position window for RD DQS\n");
+			break;
+
+		case MEM_ERROR_NO_DQS_POS_WR_WINDOW:
+			printk(BIOS_DEBUG, "No DQS Position window for WR DQS\n");
+			break;
+
+		case MEM_ERROR_SMALL_DQS_POS_WR_WINDOW:
+			printk(BIOS_DEBUG, "Small DQS Position window for WR DQS\n");
+			break;
+
+		case MEM_ERROR_DIMM_SPARING_NOT_ENABLED:
+			printk(BIOS_DEBUG, "DIMM sparing has not been enabled for an internal issues\n");
+			break;
+
+		case MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE:
+			printk(BIOS_DEBUG, "Receive Enable value is too large\n");
+			break;
+		case MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW:
+			printk(BIOS_DEBUG, "There is no DQS receiver enable window\n");
+			break;
+
+		case MEM_ERROR_DRAM_ENABLED_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling DramEnabled bit\n");
+			break;
+
+		case MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling DctAccessDone bit\n");
+			break;
+
+		case MEM_ERROR_SEND_CTRL_WORD_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling SendCtrlWord bit\n");
+			break;
+
+		case MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling PrefDramTrainMode bit\n");
+			break;
+
+		case MEM_ERROR_ENTER_SELF_REF_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling EnterSelfRef bit\n");
+			break;
+
+		case MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling FreqChgInProg bit\n");
+			break;
+
+		case MEM_ERROR_EXIT_SELF_REF_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling ExitSelfRef bit\n");
+			break;
+
+		case MEM_ERROR_SEND_MRS_CMD_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling SendMrsCmd bit\n");
+			break;
+
+		case MEM_ERROR_SEND_ZQ_CMD_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling SendZQCmd bit\n");
+			break;
+
+		case MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling DctExtraAccessDone bit\n");
+			break;
+
+		case MEM_ERROR_MEM_CLR_BUSY_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling MemClrBusy bit\n");
+			break;
+
+		case MEM_ERROR_MEM_CLEARED_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling MemCleared bit\n");
+			break;
+
+		case MEM_ERROR_FLUSH_WR_TIME_OUT:
+			printk(BIOS_DEBUG, "Time out when polling FlushWr bit\n");
+			break;
+
+		case MEM_ERROR_MAX_LAT_NO_WINDOW:
+			printk(BIOS_DEBUG, "Fail to find pass during Max Rd Latency training\n");
+			break;
+
+		case MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL:
+			printk(BIOS_DEBUG, "Fail to launch training code on an AP\n");
+			break;
+
+		case MEM_ERROR_PARALLEL_TRAINING_TIME_OUT:
+			printk(BIOS_DEBUG, "Fail to finish parallel training\n");
+			break;
+
+		case MEM_ERROR_NO_ADDRESS_MAPPING:
+			printk(BIOS_DEBUG, "No address mapping found for a dimm\n");
+			break;
+
+		case MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT:
+			printk(BIOS_DEBUG, "There is no DQS receiver enable window and the value is equal to the largest value\n");
+			break;
+
+		case MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE:
+			printk(BIOS_DEBUG, "Receive Enable value is too large and is 1 less than limit\n");
+			break;
+
+		case MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR:
+			printk(BIOS_DEBUG, "SPD Checksum error for NV_SPDCHK_RESTRT\n");
+			break;
+
+		case MEM_ERROR_NO_CHIPSELECT:
+			printk(BIOS_DEBUG, "No chipselects found\n");
+			break;
+
+		case MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM:
+			printk(BIOS_DEBUG, "Unbuffered dimm is not supported at 333MHz\n");
+			break;
+
+		case MEM_ERROR_WL_PRE_OUT_OF_RANGE:
+			printk(BIOS_DEBUG, "Returned PRE value during write levelizzation was out of range\n");
+			break;
+
+		case CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE:
+			printk(BIOS_DEBUG, "No heap is allocated for BrandId structure\n");
+			break;
+
+		case CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED:
+			printk(BIOS_DEBUG, "Unable to load micro code patch\n");
+			break;
+
+		case CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE:
+			printk(BIOS_DEBUG, "No heap is allocated for the Pstate structure\n");
+			break;
+
+/*
+		case CPU_ERROR_PM_NB_PSTATE_MISMATCH:
+			printk(BIOS_DEBUG, "NB P-state indicated by Index was disabled due to mismatch between processors\n");
+			break;
+*/
+
+		case CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR:
+			printk(BIOS_DEBUG, "Allocation rule number that has been violated:");
+			if ((event->EventInfo & 0x000000FF) == 0x04) {
+				printk(BIOS_DEBUG, "AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x05) {
+				printk(BIOS_DEBUG, "AGESA_START_ADDRESS_LESS_D0000\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x06) {
+				printk(BIOS_DEBUG, "AGESA_THREE_CACHE_REGIONS_ABOVE_1MB\n");
+			} else if ((event->EventInfo & 0x000000FF) == 0x07) {
+				printk(BIOS_DEBUG, "AGESA_DEALLOCATE_CACHE_REGIONS\n");
+			}
+			printk(BIOS_DEBUG, "cache region index:%lx, start:%lx size:%lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_COH_NO_TOPOLOGY:
+			printk(BIOS_DEBUG, "no Matching Topology was found during coherent initializatio TotalHtNodes: %lx\n",
+					event->DataParam1);
+			break;
+
+		case HT_EVENT_NCOH_BUID_EXCEED:
+			printk(BIOS_DEBUG, "there is a limit of 32 unit IDs per chain Socket%lx Link%lx Depth%lx"
+					"Current BUID: %lx, Unit Count: %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4 >> 16,
+					event->DataParam4 & 0x0000FFFF);
+			break;
+
+		 case HT_EVENT_NCOH_BUS_MAX_EXCEED:
+			printk(BIOS_DEBUG, "maximum auto bus limit exceeded, Socket %lx Link %lx Bus %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_NCOH_CFG_MAP_EXCEED:
+			printk(BIOS_DEBUG, "there is a limit of four non-coherent chains, Socket %lx Link %lx\n",
+					event->DataParam1,
+					event->DataParam2);
+			break;
+
+		case HT_EVENT_NCOH_DEVICE_FAILED:
+			printk(BIOS_DEBUG, "after assigning an IO Device an ID, it does not respond at the new ID"
+					"Socket %lx Link %lx Depth %lx DeviceID %lx\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+		default:
+			break;
+	}
+}
+/**
+ *
+ */
+static void agesa_critical(EVENT_PARAMS *event)
+{
+	switch (event->EventInfo) {
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3:
+			printk(BIOS_DEBUG, "Socket: %lx, Heap allocation error for DMI table for DDR3\n",
+					event->DataParam1);
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2:
+			printk(BIOS_DEBUG, "Socket: %lx, Heap allocation error for DMI table for DDR2\n",
+					event->DataParam1);
+			break;
+
+		case MEM_ERROR_UNSUPPORTED_DIMM_CONFIG:
+			printk(BIOS_DEBUG, "Socket: %lx, Dimm population is not supported\n",
+					event->DataParam1);
+			break;
+
+		case HT_EVENT_COH_PROCESSOR_TYPE_MIX:
+			printk(BIOS_DEBUG, "Socket %lx Link %lx TotalSockets %lx, HT_EVENT_COH_PROCESSOR_TYPE_MIX \n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case HT_EVENT_COH_MPCAP_MISMATCH:
+			printk(BIOS_DEBUG, "Socket %lx Link %lx MpCap %lx TotalSockets %lx, HT_EVENT_COH_MPCAP_MISMATCH\n",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3,
+					event->DataParam4);
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ */
+static void agesa_fatal(EVENT_PARAMS *event)
+{
+
+	switch (event->EventInfo >> 24) {
+		case 0x04:
+			printk(BIOS_DEBUG, "Memory: Socket %lx Dct %lx Channel%lx ",
+					event->DataParam1,
+					event->DataParam2,
+					event->DataParam3);
+			break;
+
+		case 0x08:
+			printk(BIOS_DEBUG, "Processor: ");
+			break;
+
+		case 0x10:
+			printk(BIOS_DEBUG, "Hyper Transport: ");
+			break;
+
+		default:
+			break;
+	}
+
+	switch (event->EventInfo) {
+		case MEM_ERROR_MINIMUM_MODE:
+			printk(BIOS_DEBUG, "Running in minimum mode\n");
+			break;
+
+		case MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM:
+			printk(BIOS_DEBUG, "DIMM modules are missmatched\n");
+			break;
+
+		case MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM:
+			printk(BIOS_DEBUG, "No DIMMs have been foun\n");
+			break;
+
+		case MEM_ERROR_MISMATCH_DIMM_CLOCKS:
+			printk(BIOS_DEBUG, "DIMM clocks miss-matched\n");
+			break;
+
+		case MEM_ERROR_NO_CYC_TIME:
+			printk(BIOS_DEBUG, "No cycle time found\n");
+			break;
+		case MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS:
+			printk(BIOS_DEBUG, "Heap allocation error with dynamic storing of trained timings\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs:
+			printk(BIOS_DEBUG, "Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV:
+			printk(BIOS_DEBUG, "Heap allocation error with REMOTE_TRAINING_ENV\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_SPD:
+			printk(BIOS_DEBUG, "Heap allocation error for SPD data\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA:
+			printk(BIOS_DEBUG, "Heap allocation error for RECEIVED_DATA during parallel training\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS:
+			printk(BIOS_DEBUG, "Heap allocation error for S3 \"SPECIAL_CASE_REGISTER\"\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA:
+			printk(BIOS_DEBUG, "Heap allocation error for Training Data\n");
+			break;
+
+		case MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK:
+			printk(BIOS_DEBUG, "Heap allocation error for  DIMM Identify \"MEM_NB_BLOCK\"\n");
+			break;
+
+		case MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM:
+			printk(BIOS_DEBUG, "No Constructor for DIMM Identify\n");
+			break;
+
+		case MEM_ERROR_VDDIO_UNSUPPORTED:
+			printk(BIOS_DEBUG, "VDDIO of the dimms on the board is not supported\n");
+			break;
+
+		case CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT:
+			printk(BIOS_DEBUG, "Socket: %lx, All PStates exceeded the motherboard current limit on specified socket\n",
+				event->DataParam1);
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ *
+ * Interprte the agesa event log to an user readable string
+ */
+static void interpret_agesa_eventlog(EVENT_PARAMS *event)
+{
+	switch (event->EventClass) {
+		case AGESA_BOUNDS_CHK:
+			agesa_bound_check(event);
+			break;
+
+		case AGESA_ALERT:
+			agesa_alert(event);
+			break;
+
+		case AGESA_WARNING:
+			agesa_warning(event);
+			break;
+
+		case AGESA_ERROR:
+			agesa_error(event);
+			break;
+
+		case AGESA_CRITICAL:
+			agesa_critical(event);
+			break;
+
+		case AGESA_FATAL:
+			agesa_fatal(event);
+			break;
+
+		default:
+			break;
+	}
+}
+
+/**
+ * @param  HeapStatus -the current HeapStatus
+ */
+UINT32 agesawrapper_amdreadeventlog(UINT8 HeapStatus)
+{
+	printk(BIOS_DEBUG, "enter in %s\n", __func__);
+	AGESA_STATUS Status;
+	EVENT_PARAMS AmdEventParams;
+
+	LibAmdMemFill(&AmdEventParams,
+			0,
+			sizeof(EVENT_PARAMS),
+			&(AmdEventParams.StdHeader));
+
+	AmdEventParams.StdHeader.AltImageBasePtr = 0;
+	AmdEventParams.StdHeader.CalloutPtr = NULL;
+	AmdEventParams.StdHeader.Func = 0;
+	AmdEventParams.StdHeader.ImageBasePtr = 0;
+	/* I have to know the current HeapStatus to Locate the EventLogHeapPointer */
+	AmdEventParams.StdHeader.HeapStatus = HeapStatus;
+	Status = AmdReadEventLog(&AmdEventParams);
+	while (AmdEventParams.EventClass != 0) {
+		printk(BIOS_DEBUG,"\nEventLog:  EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo);
+		printk(BIOS_DEBUG,"  Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2);
+		printk(BIOS_DEBUG,"  Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4);
+		interpret_agesa_eventlog(&AmdEventParams);
+		Status = AmdReadEventLog(&AmdEventParams);
+	}
+
+	printk(BIOS_DEBUG, "exit %s \n", __func__);
+	return (UINT32)Status;
+}
+
diff --git a/src/mainboard/tyan/s8226/agesawrapper.h b/src/mainboard/tyan/s8226/agesawrapper.h
new file mode 100644
index 0000000..43c7d10
--- /dev/null
+++ b/src/mainboard/tyan/s8226/agesawrapper.h
@@ -0,0 +1,87 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+
+#ifndef _AGESAWRAPPER_H_
+#define _AGESAWRAPPER_H_
+
+#include <stdint.h>
+#include "Porting.h"
+#include "AGESA.h"
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+#define PCIE_BASE_ADDRESS   CONFIG_MMCONF_BASE_ADDRESS
+
+enum {
+	PICK_DMI,       /* DMI Interface */
+	PICK_PSTATE,    /* Acpi Pstate SSDT Table */
+	PICK_SRAT,      /* SRAT Table */
+	PICK_SLIT,      /* SLIT Table */
+	PICK_WHEA_MCE,  /* WHEA MCE table */
+	PICK_WHEA_CMC,  /* WHEA CMV table */
+	PICK_ALIB,      /* SACPI SSDT table with ALIB implementation */
+};
+
+
+
+/*----------------------------------------------------------------------------------------
+ *                  T Y P E D E F S     A N D     S T R U C T U  R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef struct {
+	UINT32 CalloutName;
+	AGESA_STATUS (*CalloutPtr)(UINT32 Func, UINT32 Data, VOID* ConfigPtr);
+} BIOS_CALLOUT_STRUCT;
+
+/*----------------------------------------------------------------------------------------
+ *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                          E X P O R T E D    F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+UINT32 agesawrapper_amdinitreset (void);
+UINT32 agesawrapper_amdinitearly (void);
+UINT32 agesawrapper_amdinitenv (void);
+UINT32 agesawrapper_amdinitlate (void);
+UINT32 agesawrapper_amdinitpost (void);
+UINT32 agesawrapper_amdinitmid (void);
+UINT32 agesawrapper_amdreadeventlog (UINT8 HeapStatus);
+UINT32 agesawrapper_amdinitmmio (void);
+void *agesawrapper_getlateinitptr (int pick);
+UINT32 agesawrapper_amdlaterunaptask(UINT32 Data, VOID *ConfigPtr);
+
+#endif
diff --git a/src/mainboard/tyan/s8226/buildOpts.c b/src/mainboard/tyan/s8226/buildOpts.c
new file mode 100644
index 0000000..0f618ec
--- /dev/null
+++ b/src/mainboard/tyan/s8226/buildOpts.c
@@ -0,0 +1,616 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "CommonReturns.h"
+#include "AdvancedApi.h"
+#include <PlatformMemoryConfiguration.h>
+#include "Filecode.h"
+#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
+
+/* AGESA will check the OEM configuration during preprocessing stage,
+ * coreboot enable -Wundef option, so we should make sure we have all contanstand defined
+ */
+/* MEMORY_BUS_SPEED */
+#define  DDR400_FREQUENCY		200	///< DDR 400
+#define  DDR533_FREQUENCY		266	///< DDR 533
+#define  DDR667_FREQUENCY		333	///< DDR 667
+#define  DDR800_FREQUENCY		400	///< DDR 800
+#define  DDR1066_FREQUENCY		533	///< DDR 1066
+#define  DDR1333_FREQUENCY		667	///< DDR 1333
+#define  DDR1600_FREQUENCY		800	///< DDR 1600
+#define  DDR1866_FREQUENCY		933	///< DDR 1866
+#define  UNSUPPORTED_DDR_FREQUENCY	934	///< Highest limit of DDR frequency
+
+/* QUANDRANK_TYPE*/
+#define QUADRANK_REGISTERED		0	///< Quadrank registered DIMM
+#define QUADRANK_UNBUFFERED		1	///< Quadrank unbuffered DIMM
+
+/* USER_MEMORY_TIMING_MODE */
+#define TIMING_MODE_AUTO		0	///< Use best rate possible
+#define TIMING_MODE_LIMITED		1	///< Set user top limit
+#define TIMING_MODE_SPECIFIC		2	///< Set user specified speed
+
+/* POWER_DOWN_MODE */
+#define POWER_DOWN_BY_CHANNEL		0	///< Channel power down mode
+#define POWER_DOWN_BY_CHIP_SELECT	1	///< Chip select power down mode
+
+/* User makes option selections here
+ * Comment out the items wanted to be included in the build.
+ * Uncomment those items you with to REMOVE from the build.
+ */
+//#define BLDOPT_REMOVE_UDIMMS_SUPPORT           TRUE
+//#define BLDOPT_REMOVE_RDIMMS_SUPPORT           TRUE
+//#define BLDOPT_REMOVE_ECC_SUPPORT              TRUE
+//#define BLDOPT_REMOVE_BANK_INTERLEAVE          TRUE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE           TRUE
+//#define BLDOPT_REMOVE_NODE_INTERLEAVE          TRUE
+//#define BLDOPT_REMOVE_PARALLEL_TRAINING        TRUE
+//#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT     TRUE
+#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT      TRUE
+//#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT      TRUE
+////#define BLDOPT_REMOVE_ACPI_PSTATES             TRUE
+////#define BLDOPT_REMOVE_SRAT                     TRUE
+////#define BLDOPT_REMOVE_SLIT                     TRUE
+//#define BLDOPT_REMOVE_WHEA                     TRUE
+//#define BLDOPT_REMOVE_DMI                      TRUE
+
+/*f15 Rev A1 ucode patch CpuF15OrMicrocodePatch0600011F */
+#define BLDOPT_REMOVE_EARLY_SAMPLES		FALSE
+
+//#define BLDOPT_REMOVE_HT_ASSIST                TRUE
+//#define BLDOPT_REMOVE_MSG_BASED_C1E            TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS              TRUE
+
+/* Build configuration values here.
+ */
+#define BLDCFG_VRM_CURRENT_LIMIT                 120000
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD           0
+#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT          0
+#define BLDCFG_PLAT_NUM_IO_APICS                 3
+#define BLDCFG_CORE_LEVELING_MODE                CORE_LEVEL_LOWEST
+#define BLDCFG_MEM_INIT_PSTATE                   0
+#define BLDCFG_AMD_PSTATE_CAP_VALUE              0
+
+#define BLDCFG_AMD_PLATFORM_TYPE                  AMD_PLATFORM_SERVER
+
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT         DDR1333_FREQUENCY//1600
+#define BLDCFG_MEMORY_MODE_UNGANGED               TRUE
+#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE           TRUE
+#define BLDCFG_MEMORY_QUADRANK_TYPE               QUADRANK_REGISTERED
+#define BLDCFG_MEMORY_RDIMM_CAPABLE               TRUE
+#define BLDCFG_MEMORY_UDIMM_CAPABLE               TRUE
+#define BLDCFG_MEMORY_SODIMM_CAPABLE              FALSE
+#define BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB          TRUE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING    FALSE//TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING    FALSE//TRUE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING        FALSE//TRUE
+#define BLDCFG_MEMORY_POWER_DOWN                  FALSE
+#define BLDCFG_POWER_DOWN_MODE                    POWER_DOWN_BY_CHANNEL
+#define BLDCFG_ONLINE_SPARE                       FALSE
+#define BLDCFG_BANK_SWIZZLE                       TRUE
+#define BLDCFG_TIMING_MODE_SELECT                 TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT                DDR1333_FREQUENCY //DDR800_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL               TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM                FALSE
+#define BLDCFG_USE_BURST_MODE                     FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON               FALSE
+#define BLDCFG_ENABLE_ECC_FEATURE                 TRUE
+#define BLDCFG_ECC_REDIRECTION                    FALSE
+#define BLDCFG_SCRUB_IC_RATE                      0
+#define BLDCFG_ECC_SYNC_FLOOD                     TRUE
+#define BLDCFG_ECC_SYMBOL_SIZE                    4
+
+#define BLDCFG_PCI_MMIO_BASE                    CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE                    CONFIG_MMCONF_BUS_NUMBER
+
+/**
+ * Enable Message Based C1e CPU feature in multi-socket systems.
+ * BLDCFG_PLATFORM_C1E_OPDATA element be defined with a valid IO port value,
+ * else the feature cannot be enabled.
+ */
+#define BLDCFG_PLATFORM_C1E_MODE                  C1eModeMsgBased
+#define BLDCFG_PLATFORM_C1E_OPDATA                0x80//TODO
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1        0
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2        0
+
+#define BLDCFG_HEAP_DRAM_ADDRESS                  0xB0000
+#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS    0xD0000000
+#define BLDCFG_1GB_ALIGN                          FALSE
+//#define BLDCFG_PROCESSOR_SCOPE_NAME0              'C'
+//#define BLDCFG_PROCESSOR_SCOPE_NAME1              '0'
+//
+
+// Select the platform control flow mode for performance tuning.
+#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm
+
+/**
+ * Enable the probe filtering performance tuning feature.
+ * The probe filter provides filtering of broadcast probes to
+ * improve link bandwidth and performance for multi- node systems.
+ *
+ * This feature may interact with other performance features.
+ *  TRUE  -Enable the feature (default) if supported by all processors,
+ *         based on revision and presence of L3 cache.
+ *         The feature is not enabled if there are no coherent HT links.
+ *  FALSE -Do not enable the feature regardless of the configuration.
+ */
+//TODO enable it,
+//but AGESA set PFMode = 0; //PF Disable, HW never set PFInitDone
+//hang in F10HtAssistInit() do{...} while(PFInitDone != 1)
+#define BLDCFG_USE_HT_ASSIST	FALSE
+
+/**
+ * The socket and link match values are platform specific
+ */
+CONST MANUAL_BUID_SWAP_LIST ROMDATA s8226_manual_swaplist[2] =
+{
+	{
+		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		{ //BUID Swap List
+			{ //BUID Swaps
+				/* Each Non-coherent chain may have a list of device swaps,
+				 * Each item specify a device will be swap from its current id to a new one
+				 */
+				/* FromID 0x00 is the chain with the southbridge */
+				/* 'Move' device zero to device zero, All others are non applicable */
+				{0x00, 0x00}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
+			},
+
+			{ //The ordered final BUIDs
+				/* Specify the final BUID to be zero, All others are non applicable */
+				0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+			}
+		}
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+
+#if CONFIG_HT3_SUPPORT == 1
+/**
+ * The socket and link match values are platform specific
+ *
+ */
+CONST CPU_TO_CPU_PCB_LIMITS ROMDATA s8226_cpu2cpu_limit_list[2] =
+{
+	{
+		/* On the reference platform, these settings apply to all coherent links */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set incoming and outgoing links to 16 bit widths, and 3.2GHz frequencies */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M,
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+
+CONST IO_PCB_LIMITS ROMDATA s8226_io_limit_list[2] =
+{
+	{
+		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set upstream and downstream links to 16 bit widths, and limit frequencies to 3.2GHz */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M, //Actually IO hub only support 2600M MAX
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+#else //CONFIG_HT3_SUPPORT == 0
+CONST CPU_TO_CPU_PCB_LIMITS ROMDATA s8226_cpu2cpu_limit_list[2] =
+{
+	{
+		/* On the reference platform, these settings apply to all coherent links */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY,
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL,
+	}
+};
+
+CONST IO_PCB_LIMITS ROMDATA s8226_io_limit_list[2] =
+{
+	{
+		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
+		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,
+
+		/* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */
+		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY,
+	},
+
+	/* The 2nd element in the array merely terminates the list */
+	{
+		HT_LIST_TERMINAL
+	}
+};
+#endif //CONFIG_HT3_SUPPORT == 0
+
+/**
+ * HyperTransport links will typically require an equalization at high frequencies.
+ * This is called deemphasis.
+ *
+ * Deemphasis is specified as levels, for example, -3 db.
+ * There are two levels for each link, its receiver deemphasis level and its DCV level,
+ * which is based on the far side transmitter's deemphasis.
+ * For each link, different levels may be required at each link frequency.
+ *
+ * Coherent connections between processors should have an entry for the port on each processor.
+ * There should be one entry for the host root port of each non-coherent chain.
+ *
+ * AGESA initialization code does not set deemphasis on IO Devices.
+ * A default is provided for internal links of MCM processors, and
+ * those links will generally not need deemphasis structures.
+ */
+CONST CPU_HT_DEEMPHASIS_LEVEL ROMDATA s8226_deemphasis_list[] =
+{
+	/* Socket, Link, LowFreq, HighFreq, Receiver Deemphasis, Dcv Deemphasis */
+
+	/* Non-coherent link deemphasis. */
+	{0, 2, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{0, 2, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{0, 2, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{0, 2, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{0, 2, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{0, 2, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	{1, 2, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{1, 2, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{1, 2, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{1, 2, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{1, 2, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{1, 2, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	{2, 0, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{2, 0, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{2, 0, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{2, 0, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{2, 0, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{2, 0, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	{3, 0, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{3, 0, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
+	{3, 0, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
+	{3, 0, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
+	{3, 0, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
+	{3, 0, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},
+
+	/* Coherent link deemphasis. */
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus3},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus6},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus6},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus8},
+	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2600M, HT_FREQUENCY_MAX, DeemphasisLevelMinus11pre8, DcvLevelMinus11},
+
+	/* End of the list */
+	{
+		HT_LIST_TERMINAL
+	}
+};
+
+/**
+ * For systems using socket infrastructure that permits strapping the SBI
+ * address for each socket, this should be used to provide a socket ID value.
+ * This is referred to as the hardware method for socket naming, and is the
+ * preferred solution.
+ */
+/*
+ * I do NOT know howto config socket id in simnow,
+ * so use this software way to make HT works in simnow,
+ * real hardware do not need this Socket Map.
+ *
+ * A physical socket map for a 4 G34 Sockets MCM processors topology,
+ * reference the mainboard schemantic in detail.
+ *
+ */
+CONST SYSTEM_PHYSICAL_SOCKET_MAP ROMDATA s8226_socket_map[] =
+{
+#define HT_SOCKET0	0
+#define HT_SOCKET1	1
+#define HT_SOCKET2	2
+#define HT_SOCKET3	3
+
+/**
+ * 0-3 are sublink 0, 4-7 are sublink 1
+ */
+#define HT_LINK0A	0
+#define HT_LINK1A	1
+#define HT_LINK2A	2
+#define HT_LINK3A	3
+#define HT_LINK0B	4
+#define HT_LINK1B	5
+#define HT_LINK2B	6
+#define HT_LINK3B	7
+
+	/* Source Socket, Link, Target Socket */
+/*	{HT_SOCKET0, HT_LINK0A, HT_SOCKET1},
+	{HT_SOCKET0, HT_LINK0B, HT_SOCKET3},
+	{HT_SOCKET0, HT_LINK1A, HT_SOCKET1},
+	{HT_SOCKET0, HT_LINK1B, HT_SOCKET3},
+	{HT_SOCKET0, HT_LINK3A, HT_SOCKET2},
+	{HT_SOCKET0, HT_LINK3B, HT_SOCKET2},
+
+	{HT_SOCKET1, HT_LINK0A, HT_SOCKET2},
+	{HT_SOCKET1, HT_LINK0B, HT_SOCKET3},
+	{HT_SOCKET1, HT_LINK1A, HT_SOCKET0},
+	{HT_SOCKET1, HT_LINK1B, HT_SOCKET2},
+	{HT_SOCKET1, HT_LINK3A, HT_SOCKET0},
+	{HT_SOCKET1, HT_LINK3B, HT_SOCKET3},
+
+	{HT_SOCKET2, HT_LINK0A, HT_SOCKET3},
+	{HT_SOCKET2, HT_LINK0B, HT_SOCKET0},
+	{HT_SOCKET2, HT_LINK1A, HT_SOCKET3},
+	{HT_SOCKET2, HT_LINK1B, HT_SOCKET1},
+	{HT_SOCKET2, HT_LINK3A, HT_SOCKET1},
+	{HT_SOCKET2, HT_LINK3B, HT_SOCKET0},
+
+	{HT_SOCKET3, HT_LINK0A, HT_SOCKET2},
+	{HT_SOCKET3, HT_LINK0B, HT_SOCKET1},
+	{HT_SOCKET3, HT_LINK1A, HT_SOCKET1},
+	{HT_SOCKET3, HT_LINK1B, HT_SOCKET0},
+	{HT_SOCKET3, HT_LINK3A, HT_SOCKET0},
+	{HT_SOCKET3, HT_LINK3B, HT_SOCKET2}, */
+};
+
+CONST AP_MTRR_SETTINGS ROMDATA s8226_ap_mtrr_list[] =
+{
+	{AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E},
+	{AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E},
+	{AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_C0000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_C8000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_D0000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_D8000,  0x0000000000000000},
+	{AMD_AP_MTRR_FIX4k_E0000,  0x1818181818181818},
+	{AMD_AP_MTRR_FIX4k_E8000,  0x1818181818181818},
+	{AMD_AP_MTRR_FIX4k_F0000,  0x1818181818181818},
+	{AMD_AP_MTRR_FIX4k_F8000,  0x1818181818181818},
+	{CPU_LIST_TERMINAL}
+};
+
+#define BLDCFG_BUID_SWAP_LIST			&s8226_manual_swaplist
+#define BLDCFG_HTFABRIC_LIMITS_LIST		&s8226_cpu2cpu_limit_list
+#define BLDCFG_HTCHAIN_LIMITS_LIST		&s8226_io_limit_list
+#define BLDCFG_PLATFORM_DEEMPHASIS_LIST		&s8226_deemphasis_list
+#define BLDCFG_AP_MTRR_SETTINGS_LIST		&s8226_ap_mtrr_list
+//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP	&s8226_socket_map
+
+
+/*  Process the options...
+ * This file include MUST occur AFTER the user option selection settings
+ */
+#define AGESA_ENTRY_INIT_RESET                    TRUE//FALSE
+#define AGESA_ENTRY_INIT_RECOVERY                 FALSE
+#define AGESA_ENTRY_INIT_EARLY                    TRUE
+#define AGESA_ENTRY_INIT_POST                     TRUE
+#define AGESA_ENTRY_INIT_ENV                      TRUE
+#define AGESA_ENTRY_INIT_MID                      TRUE
+#define AGESA_ENTRY_INIT_LATE                     TRUE
+#define AGESA_ENTRY_INIT_S3SAVE                   TRUE
+#define AGESA_ENTRY_INIT_RESUME                   TRUE
+#define AGESA_ENTRY_INIT_LATE_RESTORE             TRUE
+#define AGESA_ENTRY_INIT_GENERAL_SERVICES         TRUE
+
+/*
+#if (CONFIG_CPU_AMD_AGESA_FAMILY15 == 1)
+  #define BLDOPT_REMOVE_FAMILY_10_SUPPORT         TRUE
+#endif
+#if (CONFIG_CPU_AMD_AGESA_FAMILY10 == 1)
+  #define BLDOPT_REMOVE_FAMILY_15_SUPPORT         TRUE
+#endif
+*/
+
+//#include "GnbInterface.h"     /*prototype for GnbInterfaceStub*/
+#include "SanMarinoInstall.h"
+
+/*----------------------------------------------------------------------------------------
+ *                        CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+//reference BKDG Table87: works
+#define F15_WL_SEED 0x3B //family15 BKDG recommand 3B RDIMM, 1A UDIMM.
+#define SEED_A 0x54
+#define SEED_B 0x4D
+#define SEED_C 0x45
+#define SEED_D 0x40
+
+#define F10_WL_SEED 0x3B //family10 BKDG recommand 3B RDIMM, 1A UDIMM.
+//4B 41 51
+
+/*
+ *  Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ *  (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ *  is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ *  use its default conservative settings.
+ */
+CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+	//
+	// The following macros are supported (use comma to separate macros):
+	//
+	// MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
+	//      The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
+	//      AGESA will base on this value to disable unused MemClk to save power.
+	//      Example:
+	//      BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
+	//           Bit AM3/S1g3 pin name
+	//           0   M[B,A]_CLK_H/L[0]
+	//           1   M[B,A]_CLK_H/L[1]
+	//           2   M[B,A]_CLK_H/L[2]
+	//           3   M[B,A]_CLK_H/L[3]
+	//           4   M[B,A]_CLK_H/L[4]
+	//           5   M[B,A]_CLK_H/L[5]
+	//           6   M[B,A]_CLK_H/L[6]
+	//           7   M[B,A]_CLK_H/L[7]
+	//      And platform has the following routing:
+	//           CS0   M[B,A]_CLK_H/L[4]
+	//           CS1   M[B,A]_CLK_H/L[2]
+	//           CS2   M[B,A]_CLK_H/L[3]
+	//           CS3   M[B,A]_CLK_H/L[5]
+	//      Then platform can specify the following macro:
+	//      MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
+	//
+	// CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
+	//      The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
+	//      AGESA will base on this value to tristate unused CKE to save power.
+	//
+	// ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
+	//      The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
+	//      AGESA will base on this value to tristate unused ODT pins to save power.
+	//
+	// CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
+	//      The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
+	//      AGESA will base on this value to tristate unused Chip select to save power.
+	//
+	// NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
+	//      Specifies the number of DIMM slots per channel.
+	//
+	// NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
+	//      Specifies the number of Chip selects per channel.
+	//
+	// NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
+	//      Specifies the number of channels per socket.
+	//
+	// OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
+	//      Specifies DDR bus speed of channel ChannelID on socket SocketID.
+	//
+	// DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
+	//      Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
+	//
+	// WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+	//      Byte6Seed, Byte7Seed, ByteEccSeed)
+	//      Specifies the write leveling seed for a channel of a socket.
+	//
+
+	/* Specifies the write leveling seed for a channel of a socket.
+	 * WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID,
+	 *                     Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed,
+	 *                     Byte4Seed, Byte5Seed, Byte6Seed, Byte7Seed,
+	 *                     ByteEccSeed)
+	 */
+	WRITE_LEVELING_SEED(
+			ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS,
+			F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED,
+			F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED,
+			F15_WL_SEED),
+
+	/* HW_RXEN_SEED(SocketID, ChannelID, DimmID,
+	 *              Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed,
+	 *              Byte4Seed, Byte5Seed, Byte6Seed, Byte7Seed, ByteEccSeed)
+	 */
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
+		SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A,
+		SEED_A),
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_B, ALL_DIMMS,
+		SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B,
+		SEED_B),
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_C, ALL_DIMMS,
+		SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C,
+		SEED_C),
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_D, ALL_DIMMS,
+		SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D,
+		SEED_D),
+
+	NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 3), //max 3
+	PSO_END
+};
+
+/*
+ * These tables are optional and may be used to adjust memory timing settings
+ */
+//HY Customer table
+UINT8 AGESA_MEM_TABLE_HY[][sizeof (MEM_TABLE_ALIAS)] =
+{
+	// Hardcoded Memory Training Values
+
+	// The following macro should be used to override training values for your platform
+	//
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
+	//
+	//   NOTE:
+	//   The following training hardcode values are example values that were taken from a tilapia motherboard
+	//   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
+	//   the table and replace the byte lane values with your own.
+	//
+	//                                                                               ------------------ BYTE LANES ----------------------
+	//                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
+	// Write Data Timing
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
+	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
+
+	// DQS Receiver Enable
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
+	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
+
+	// Write DQS Delays
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
+
+	// Read DQS Delays
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
+	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
+	//--------------------------------------------------------------------------------------------------------------------------------------------------
+	// TABLE END
+	NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
+};
+UINT8 SizeOfTableHy = sizeof (AGESA_MEM_TABLE_HY) / sizeof (AGESA_MEM_TABLE_HY[0]);
+
diff --git a/src/mainboard/tyan/s8226/cmos.layout b/src/mainboard/tyan/s8226/cmos.layout
new file mode 100644
index 0000000..3b98cbb
--- /dev/null
+++ b/src/mainboard/tyan/s8226/cmos.layout
@@ -0,0 +1,118 @@
+#*****************************************************************************
+#
+#  This file is part of the coreboot project.
+#
+#  Copyright (C) 2011 Advanced Micro Devices, Inc.
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; version 2 of the License.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#*****************************************************************************
+
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399          1       e       2        multi_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432          8       h       0        boot_countdown
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        amd_reserved
+
+
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+8     0     400Mhz
+8     1     333Mhz
+8     2     266Mhz
+8     3     200Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/tyan/s8226/devicetree.cb b/src/mainboard/tyan/s8226/devicetree.cb
new file mode 100644
index 0000000..4459019
--- /dev/null
+++ b/src/mainboard/tyan/s8226/devicetree.cb
@@ -0,0 +1,128 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+chip northbridge/amd/agesa/family15/root_complex
+	device lapic_cluster 0 on
+		chip cpu/amd/agesa/family15
+			device lapic 0x20 on end #f15
+			#device lapic 0x10 on end #f10
+		end
+	end
+	device pci_domain 0 on
+		subsystemid 0x15d9 0xab11 inherit #Tyan
+		chip northbridge/amd/agesa/family15 # CPU side of HT root complex
+			device pci 18.0 on     # Put IO-HUB at link_num 0, Instead of HT Link topology
+				chip northbridge/amd/cimx/rd890 # Southbridge PCI side of HT Root complex
+					device pci 0.0 on  end # HT Root Complex 0x9600
+					device pci 0.1 off end # CLKCONFIG
+					device pci 2.0 on  end # GPP1 Port0  x16 SLOT4, 0x5A16
+					device pci 3.0 off end # GPP1 Port1
+					device pci 4.0 on end # GPP3a Port0  x4 SAS
+					device pci 5.0 on end # GPP3a Port1
+					device pci 6.0 on end # GPP3a Port2
+					device pci 7.0 on end # GPP3a Port3
+					device pci 8.0 off end # NB/SB Link P2P bridge, should be hidden at boot time
+					device pci 9.0 on end # GPP3a Port4  x1 NC
+					device pci a.0 on end # GPP3a Port5  x1 NC
+					device pci b.0 on end # GPP2 Port0 (Not for sr5650)
+					device pci c.0 off end # GPP2 Port1 (Not for sr5650/sr5670)
+					device pci d.0 on  end # GPP3b Port0 (Not for sr5650/sr5670) 0x5A1E, Intel 82576
+					register "gpp1_configuration" = "0"   # Configuration 16:0 default
+					register "gpp2_configuration" = "0"   # Configuration 8:8
+					register "gpp3a_configuration" = "2"   # 2 Configuration 4:1:1:0:0:0, 11 Configuration 1:1:1:1:1:1
+					register "port_enable" = "0x3ef6"
+				end #northbridge/amd/cimx/rd890
+				chip southbridge/amd/cimx/sb700 # it is under NB/SB Link, but on the same pci bus
+					device pci 11.0 on end # SATA
+					device pci 12.0 on end # USB1
+					device pci 12.1 on end # USB1
+					device pci 12.2 on end # USB1
+					device pci 13.0 on end # USB2
+					device pci 13.1 on end # USB2
+					device pci 13.2 on end # USB2
+					device pci 14.0 on end # SM
+					device pci 14.1 off end # IDE  0x439c
+					device pci 14.2 off end # HDA  0x4383, s8226 not have codec.
+					device pci 14.3 on # LPC  0x439d
+						chip superio/winbond/w83627dhg
+							device pnp 2e.0 off #  Floppy
+								io 0x60 = 0x3f0
+								irq 0x70 = 6
+								drq 0x74 = 2
+							end
+							device pnp 2e.1 off #  Parallel Port
+								io 0x60 = 0x378
+								irq 0x70 = 7
+							end
+							device pnp 2e.2 on  #  Com1
+								io 0x60 = 0x3f8
+								irq 0x70 = 4
+							end
+							device pnp 2e.3 on  #  Com2
+								io 0x60 = 0x2f8
+								irq 0x70 = 3
+							end
+							## though UARTs are on the NUVOTON BMC, superio only used to support PS2 KB/MS##
+							device pnp 2e.5 on #  PS/2 keyboard & mouse
+								io 0x60 = 0x60
+								io 0x62 = 0x64
+								irq 0x70 = 0x01 #keyboard
+								irq 0x72 = 0x0C #mouse
+							end
+							device pnp 2e.6 off #  SPI
+							end
+							device pnp 2e.307 off #  GPIO6
+							end
+							device pnp 2e.8 off #  WDTO#, PLED
+							end
+							device pnp 2e.009 off #  GPIO2
+							end
+							device pnp 2e.109 off #  GPIO3
+							end
+							device pnp 2e.209 off #  GPIO4
+							end
+							device pnp 2e.309 off #  GPIO5
+							end
+							device pnp 2e.a off #  ACPI
+							end
+							device pnp 2e.b off # HWM
+								io 0x60 = 0x290
+							end
+							device pnp 2e.c off # PECI, SST
+							end
+						end #superio/winbond/w83627dhg
+						chip drivers/i2c/w83795
+							device pnp 5e on #hwm
+							end
+						end #drivers/i2c/w83795
+					end # LPC
+					device pci 14.4 on end # PCI 0x4384
+					device pci 14.5 on end # USB 3
+					register "boot_switch_sata_ide" = "0"   # 0: boot from SATA. 1: IDE
+				end # southbridge/amd/cimx/sb700
+			end # device pci 18.0
+
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+			device pci 18.4 on end
+			device pci 18.5 on end #f15
+		end #chip northbridge/amd/agesa/family15 # CPU side of HT root complex
+	end #pci_domain
+end #northbridge/amd/agesa/family15/root_complex
+
diff --git a/src/mainboard/tyan/s8226/dimmSpd.c b/src/mainboard/tyan/s8226/dimmSpd.c
new file mode 100644
index 0000000..df33088
--- /dev/null
+++ b/src/mainboard/tyan/s8226/dimmSpd.c
@@ -0,0 +1,222 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_ids.h>
+
+AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info);
+#define DIMENSION(array)(sizeof (array)/ sizeof (array [0]))
+
+/* SP5100 GPIO 49-52 contoled by SMBUS PCI_Reg 0x52 */
+#define SP5100_GPIO37_46_47_48	0xA6
+#define SP5100_GPIO49_52	0x50
+
+/**
+ * TODO not support all GPIO yet
+ * @param reg -GPIO Cntrl Register
+ * @param out -GPIO bitmap
+ * @param out -GPIO enable bitmap
+ * @return  old setting
+ */
+static u8 sp5100_set_gpio(u8 reg, u8 out, u8 enable)
+{
+	u8 value, ret;
+	device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBUS
+
+	value = pci_read_config8(sm_dev, reg);
+	ret = value;
+	value &= ~(enable);
+	value |= out;
+	value &= ~(enable << 4);
+	pci_write_config8(sm_dev, reg, value);
+
+	return ret;
+}
+
+static void sp5100_restore_gpio(u8 reg, u8 value)
+{
+	device_t sm_dev = PCI_DEV(0, 0x14, 0);
+	pci_write_config8(sm_dev, reg, value);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * SPD address table - porting required
+ */
+static const UINT8 spdAddressLookup [2] [2] [3] = { // socket, channel, dimm
+	/* socket 0 */
+	{
+		{0xA0, 0xA4, 0xA8},
+		{0xA2, 0xA6, 0xAA},
+	},
+	/* socket 1 */
+	{
+		{0xA0, 0xA4, 0xA8},
+		{0xA2, 0xA6, 0xAA},
+	},
+};
+
+/*-----------------------------------------------------------------------------
+ *
+ * readSmbusByteData - read a single SPD byte from any offset
+ */
+
+static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
+{
+	unsigned int status;
+	UINT64 limit;
+
+	address |= 1; // set read bit
+
+	outb(0xFF, iobase + 0);                // clear error status
+	outb(0x1F, iobase + 1);                // clear error status
+	outb(offset, iobase + 3);              // offset in eeprom
+	outb(address, iobase + 4);             // slave address and read bit
+	outb(0x48, iobase + 2);                // read byte command
+
+	// time limit to avoid hanging for unexpected error status (should never happen)
+	limit = __rdtsc () + 2000000000 / 10;
+	for (;;)
+	{
+		status = inb(iobase);
+		if (__rdtsc () > limit) break;
+		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
+		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
+		break;
+	}
+
+	buffer [0] = inb(iobase + 5);
+	if (status == 2) status = 0;                      // check for done with no errors
+	return status;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * readSmbusByte - read a single SPD byte from the default offset
+ *                 this function is faster function readSmbusByteData
+ */
+
+static int readSmbusByte (int iobase, int address, char *buffer)
+{
+	unsigned int status;
+	UINT64 limit;
+
+	outb(0xFF, iobase + 0);                // clear error status
+	outb(0x44, iobase + 2);                // read command
+
+	// time limit to avoid hanging for unexpected error status
+	limit = __rdtsc () + 2000000000 / 10;
+	for (;;)
+	{
+		status = inb(iobase);
+		if (__rdtsc () > limit) break;
+		if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
+		if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
+		break;
+	}
+
+	buffer [0] = inb(iobase + 5);
+	if (status == 2) status = 0;                      // check for done with no errors
+	return status;
+}
+
+/*---------------------------------------------------------------------------
+ *
+ * readspd - Read one or more SPD bytes from a DIMM.
+ *           Start with offset zero and read sequentially.
+ *           Optimization relies on autoincrement to avoid
+ *           sending offset for every byte.
+ *          Reads 128 bytes in 7-8 ms at 400 KHz.
+ */
+
+static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
+{
+	int index, error;
+
+	/* read the first byte using offset zero */
+	error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
+	if (error) {
+		return error;
+	}
+
+	/* read the remaining bytes using auto-increment for speed */
+	for (index = 1; index < count; index++)
+	{
+		error = readSmbusByte (iobase, SmbusSlaveAddress, buffer + index);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
+static void setupFch (int ioBase)
+{
+	outb(66000000 / 400000 / 4, ioBase + 0x0E); /* set SMBus clock to 400 KHz */
+}
+
+AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info)
+{
+	AGESA_STATUS status;
+	int spdAddress, ioBase;
+	u8 i2c_channel;
+	u8 backup;
+	device_t sm_dev;
+
+	if (info->SocketId     >= DIMENSION (spdAddressLookup      )) return AGESA_ERROR;
+	if (info->MemChannelId >= DIMENSION (spdAddressLookup[0]   )) return AGESA_ERROR;
+	if (info->DimmId       >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR;
+	i2c_channel = (UINT8) info->SocketId;
+
+	/* set IDTQS3253 i2c channel
+	 * GPIO49,48 control the S1,S0
+	 *  S1 S0 true table
+	 *   0  0   channel 0
+	 *   0  1   channel 1
+	 *   1  0   channel 2   -  Socket 0
+	 *   1  1   channel 3   -  Socket 1
+	 * Note: Above is abstracted from Schemetic. But actually it seems to be other way.
+	 *   1  0   channel 2   -  Socket 1
+	 *   1  1   channel 3   -  Socket 0
+	 * Note: The DIMMs need to be plugged in from the farthest slot for each channel.
+	 */
+	backup = sp5100_set_gpio(SP5100_GPIO49_52, 0x1, 0x1);
+	sp5100_set_gpio(SP5100_GPIO37_46_47_48, (~i2c_channel & 1) << 3, 0x1 << 3);
+
+	spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId];
+	if (spdAddress == 0)
+		return AGESA_ERROR;
+
+	/*
+	 * SMBus Base Address was set during southbridge early setup.
+	 * e.g. sb700 IO mapped SMBUS_IO_BASE 0x6000, CIMX using 0xB00 as default
+	 */
+	sm_dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB700_SM), 0);
+	ioBase = pci_read_config32(sm_dev, 0x90) & (0xFFFFFFF0);
+	setupFch(ioBase);
+
+	status = readspd(ioBase, spdAddress, (void *)info->Buffer, 256);
+	sp5100_restore_gpio(SP5100_GPIO49_52, backup);
+
+	return status;
+}
diff --git a/src/mainboard/tyan/s8226/dsdt.asl b/src/mainboard/tyan/s8226/dsdt.asl
new file mode 100644
index 0000000..f26359f
--- /dev/null
+++ b/src/mainboard/tyan/s8226/dsdt.asl
@@ -0,0 +1,1794 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+	"DSDT.AML",	/* Output filename */
+	"DSDT",		/* Signature */
+	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
+	"AMD   ",	/* OEMID */
+	"S8226   ",	/* TABLE ID */
+	0x00010001	/* OEM Revision */
+	)
+{	/* Start of ASL file */
+	/* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
+
+	/* Data to be patched by the BIOS during POST */
+	/* FIXME the patching is not done yet! */
+	/* Memory related values */
+	Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
+	Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+	Name(PBLN, 0x0)	/* Length of BIOS area */
+
+	Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS)	/* Base address of PCIe config space */
+	Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+
+	Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+	Name(SSFG, 0x0D)	/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+	/* USB overcurrent mapping pins.   */
+	Name(UOM0, 0)
+	Name(UOM1, 2)
+	Name(UOM2, 0)
+	Name(UOM3, 7)
+	Name(UOM4, 2)
+	Name(UOM5, 2)
+	Name(UOM6, 6)
+	Name(UOM7, 2)
+	Name(UOM8, 6)
+	Name(UOM9, 6)
+
+	/* Some global data */
+	Name(OSTP, 3)		/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+	Name(OSV, Ones)	/* Assume nothing */
+	Name(PMOD, One)	/* Assume APIC */
+
+	/*
+	 * Processor Object
+	 *
+	 */
+	Scope (\_PR) {		/* define processor scope */
+		Processor(
+			C000,		/* name space name */
+			0x00,		/* Unique number for this processor */
+			0x810,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+			//#include "acpi/cpstate.asl"
+		}
+		Processor(C001, 0x01, 0x00000000, 0x00) {}
+		Processor(C002, 0x02, 0x00000000, 0x00) {}
+		Processor(C003, 0x03, 0x00000000, 0x00) {}
+		Processor(C004, 0x04, 0x00000000, 0x00) {}
+		Processor(C005, 0x05, 0x00000000, 0x00) {}
+		Processor(C006, 0x06, 0x00000000, 0x00) {}
+		Processor(C007, 0x07, 0x00000000, 0x00) {}
+		Processor(C008, 0x08, 0x00000000, 0x00) {}
+		Processor(C009, 0x09, 0x00000000, 0x00) {}
+		Processor(C00A, 0x0A, 0x00000000, 0x00) {}
+		Processor(C00B, 0x0B, 0x00000000, 0x00) {}
+		Processor(C00C, 0x0C, 0x00000000, 0x00) {}
+		Processor(C00D, 0x0D, 0x00000000, 0x00) {}
+		Processor(C00E, 0x0E, 0x00000000, 0x00) {}
+		Processor(C00F, 0x0F, 0x00000000, 0x00) {}
+		Processor(C010, 0x10, 0x00000000, 0x00) {}
+		Processor(C011, 0x11, 0x00000000, 0x00) {}
+		Processor(C012, 0x12, 0x00000000, 0x00) {}
+		Processor(C013, 0x13, 0x00000000, 0x00) {}
+		Processor(C014, 0x14, 0x00000000, 0x00) {}
+		Processor(C015, 0x15, 0x00000000, 0x00) {}
+		Processor(C016, 0x16, 0x00000000, 0x00) {}
+		Processor(C017, 0x17, 0x00000000, 0x00) {}
+		Processor(C018, 0x18, 0x00000000, 0x00) {}
+		Processor(C019, 0x19, 0x00000000, 0x00) {}
+		Processor(C01A, 0x1A, 0x00000000, 0x00) {}
+		Processor(C01B, 0x1B, 0x00000000, 0x00) {}
+		Processor(C01C, 0x1C, 0x00000000, 0x00) {}
+		Processor(C01D, 0x1D, 0x00000000, 0x00) {}
+		Processor(C01E, 0x1E, 0x00000000, 0x00) {}
+		Processor(C01F, 0x1F, 0x00000000, 0x00) {}
+		Processor(C020, 0x20, 0x00000000, 0x00) {}
+		Processor(C021, 0x21, 0x00000000, 0x00) {}
+		Processor(C022, 0x22, 0x00000000, 0x00) {}
+		Processor(C023, 0x23, 0x00000000, 0x00) {}
+		Processor(C024, 0x24, 0x00000000, 0x00) {}
+		Processor(C025, 0x25, 0x00000000, 0x00) {}
+		Processor(C026, 0x26, 0x00000000, 0x00) {}
+		Processor(C027, 0x27, 0x00000000, 0x00) {}
+		Processor(C028, 0x28, 0x00000000, 0x00) {}
+		Processor(C029, 0x29, 0x00000000, 0x00) {}
+		Processor(C02A, 0x2A, 0x00000000, 0x00) {}
+		Processor(C02B, 0x2B, 0x00000000, 0x00) {}
+		Processor(C02C, 0x2C, 0x00000000, 0x00) {}
+		Processor(C02D, 0x2D, 0x00000000, 0x00) {}
+		Processor(C02E, 0x2E, 0x00000000, 0x00) {}
+		Processor(C02F, 0x2F, 0x00000000, 0x00) {}
+		Alias (C000, CPU0)
+		Alias (C001, CPU1)
+		Alias (C002, CPU2)
+		Alias (C003, CPU3)
+		Alias (C004, CPU4)
+		Alias (C005, CPU5)
+		Alias (C006, CPU6)
+		Alias (C007, CPU7)
+		Alias (C008, CPU8)
+	} /* End _PR scope */
+
+	/* PIC IRQ mapping registers, C00h-C01h */
+	OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+		Field(PRQM, ByteAcc, NoLock, Preserve) {
+		PRQI, 0x00000008,
+		PRQD, 0x00000008,  /* Offset: 1h */
+	}
+	IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+		PINA, 0x00000008,	/* Index 0 */
+		PINB, 0x00000008,	/* Index 1 */
+		PINC, 0x00000008,	/* Index 2 */
+		PIND, 0x00000008,	/* Index 3 */
+		AINT, 0x00000008,	/* Index 4 */
+		SINT, 0x00000008,	/* Index 5 */
+		    , 0x00000008,	/* Index 6 */
+		AAUD, 0x00000008,	/* Index 7 */
+		AMOD, 0x00000008,	/* Index 8 */
+		PINE, 0x00000008,	/* Index 9 */
+		PINF, 0x00000008,	/* Index A */
+		PING, 0x00000008,	/* Index B */
+		PINH, 0x00000008,	/* Index C */
+	}
+
+	/* PCI Error control register */
+	OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
+		Field(PERC, ByteAcc, NoLock, Preserve) {
+		SENS, 0x00000001,
+		PENS, 0x00000001,
+		SENE, 0x00000001,
+		PENE, 0x00000001,
+	}
+
+	/* Client Management index/data registers */
+	OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
+		Field(CMT, ByteAcc, NoLock, Preserve) {
+		CMTI, 8,
+		/* Client Management Data register */
+		G64E, 1,
+		G64O, 1,
+		G32O, 2,
+		    , 2,
+		GPSL, 2,
+	}
+
+	/* GPM Port register */
+	OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
+		Field(GPT, ByteAcc, NoLock, Preserve) {
+		GPB0,1,
+		GPB1,1,
+		GPB2,1,
+		GPB3,1,
+		GPB4,1,
+		GPB5,1,
+		GPB6,1,
+		GPB7,1,
+	}
+
+	/* Flash ROM program enable register */
+	OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
+		Field(FRE, ByteAcc, NoLock, Preserve) {
+		    , 0x00000006,
+		FLRE, 0x00000001,
+	}
+
+	/* PM2 index/data registers */
+	OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
+		Field(PM2R, ByteAcc, NoLock, Preserve) {
+		PM2I, 0x00000008,
+		PM2D, 0x00000008,
+	}
+
+	/* Power Management I/O registers */
+	OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+		Field(PIOR, ByteAcc, NoLock, Preserve) {
+		PIOI, 0x00000008,
+		PIOD, 0x00000008,
+	}
+	IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+		Offset(0x00),	/* MiscControl */
+		, 1,
+		T1EE, 1,
+		T2EE, 1,
+		Offset(0x01),	/* MiscStatus */
+		, 1,
+		T1E, 1,
+		T2E, 1,
+		Offset(0x04),	/* SmiWakeUpEventEnable3 */
+		, 7,
+		SSEN, 1,
+		Offset(0x07),	/* SmiWakeUpEventStatus3 */
+		, 7,
+		CSSM, 1,
+		Offset(0x10),	/* AcpiEnable */
+		, 6,
+		PWDE, 1,
+		Offset(0x1C),	/* ProgramIoEnable */
+		, 3,
+		MKME, 1,
+		IO3E, 1,
+		IO2E, 1,
+		IO1E, 1,
+		IO0E, 1,
+		Offset(0x1D),	/* IOMonitorStatus */
+		, 3,
+		MKMS, 1,
+		IO3S, 1,
+		IO2S, 1,
+		IO1S, 1,
+		IO0S,1,
+		Offset(0x20),	/* AcpiPmEvtBlk */
+		APEB, 16,
+		Offset(0x36),	/* GEvtLevelConfig */
+		, 6,
+		ELC6, 1,
+		ELC7, 1,
+		Offset(0x37),	/* GPMLevelConfig0 */
+		, 3,
+		PLC0, 1,
+		PLC1, 1,
+		PLC2, 1,
+		PLC3, 1,
+		PLC8, 1,
+		Offset(0x38),	/* GPMLevelConfig1 */
+		, 1,
+		 PLC4, 1,
+		 PLC5, 1,
+		, 1,
+		 PLC6, 1,
+		 PLC7, 1,
+		Offset(0x3B),	/* PMEStatus1 */
+		GP0S, 1,
+		GM4S, 1,
+		GM5S, 1,
+		APS, 1,
+		GM6S, 1,
+		GM7S, 1,
+		GP2S, 1,
+		STSS, 1,
+		Offset(0x55),	/* SoftPciRst */
+		SPRE, 1,
+		, 1,
+		, 1,
+		PNAT, 1,
+		PWMK, 1,
+		PWNS, 1,
+
+		/* 	Offset(0x61), */	/*  Options_1 */
+		/* 		,7,  */
+		/* 		R617,1, */
+
+		Offset(0x65),	/* UsbPMControl */
+		, 4,
+		URRE, 1,
+		Offset(0x68),	/* MiscEnable68 */
+		, 3,
+		TMTE, 1,
+		, 1,
+		Offset(0x92),	/* GEVENTIN */
+		, 7,
+		E7IS, 1,
+		Offset(0x96),	/* GPM98IN */
+		G8IS, 1,
+		G9IS, 1,
+		Offset(0x9A),	/* EnhanceControl */
+		,7,
+		HPDE, 1,
+		Offset(0xA8),	/* PIO7654Enable */
+		IO4E, 1,
+		IO5E, 1,
+		IO6E, 1,
+		IO7E, 1,
+		Offset(0xA9),	/* PIO7654Status */
+		IO4S, 1,
+		IO5S, 1,
+		IO6S, 1,
+		IO7S, 1,
+	}
+
+	/* PM1 Event Block
+	* First word is PM1_Status, Second word is PM1_Enable
+	*/
+	OperationRegion(P1EB, SystemIO, APEB, 0x04)
+		Field(P1EB, ByteAcc, NoLock, Preserve) {
+		TMST, 1,
+		,    3,
+		BMST,    1,
+		GBST,   1,
+		Offset(0x01),
+		PBST, 1,
+		, 1,
+		RTST, 1,
+		, 3,
+		PWST, 1,
+		SPWS, 1,
+		Offset(0x02),
+		TMEN, 1,
+		, 4,
+		GBEN, 1,
+		Offset(0x03),
+		PBEN, 1,
+		, 1,
+		RTEN, 1,
+		, 3,
+		PWDA, 1,
+	}
+
+	OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100)
+		Field (GRAM, ByteAcc, Lock, Preserve)
+		{
+			Offset (0x10),
+			FLG0,   8
+		}
+
+	Scope(\_SB) {
+		/* PCIe Configuration Space for CONFIG_MMCONF_BUS_NUMBER busses */
+		OperationRegion(PCFG, SystemMemory, PCBA, PCLN)
+			Field(PCFG, ByteAcc, NoLock, Preserve) {
+			/* Byte offsets are computed using the following technique:
+			 * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
+			 * The 8 comes from 8 functions per device, and 4096 bytes per function config space
+			*/
+			Offset(0x00088024),	/* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
+			STB5, 32,
+			Offset(0x00098042),	/* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
+			PT0D, 1,
+			PT1D, 1,
+			PT2D, 1,
+			PT3D, 1,
+			PT4D, 1,
+			PT5D, 1,
+			PT6D, 1,
+			PT7D, 1,
+			PT8D, 1,
+			PT9D, 1,
+			Offset(0x000A0004),	/* Byte offset to SMBUS	register 4h - Bus 0, Device 20, Function 0 */
+			SBIE, 1,
+			SBME, 1,
+			Offset(0x000A0008),	/* Byte offset to SMBUS	register 8h - Bus 0, Device 20, Function 0 */
+			SBRI, 8,
+			Offset(0x000A0014),	/* Byte offset to SMBUS	register 14h - Bus 0, Device 20, Function 0 */
+			SBB1, 32,
+			Offset(0x000A0078),	/* Byte offset to SMBUS	register 78h - Bus 0, Device 20, Function 0 */
+			,14,
+			P92E, 1,		/* Port92 decode enable */
+		}
+
+		OperationRegion(SB5, SystemMemory, STB5, 0x1000)
+			Field(SB5, AnyAcc, NoLock, Preserve){
+			/* Port 0 */
+			Offset(0x120),		/* Port 0 Task file status */
+			P0ER, 1,
+			, 2,
+			P0DQ, 1,
+			, 3,
+			P0BY, 1,
+			Offset(0x128),		/* Port 0 Serial ATA status */
+			P0DD, 4,
+			, 4,
+			P0IS, 4,
+			Offset(0x12C),		/* Port 0 Serial ATA control */
+			P0DI, 4,
+			Offset(0x130),		/* Port 0 Serial ATA error */
+			, 16,
+			P0PR, 1,
+
+			/* Port 1 */
+			offset(0x1A0),		/* Port 1 Task file status */
+			P1ER, 1,
+			, 2,
+			P1DQ, 1,
+			, 3,
+			P1BY, 1,
+			Offset(0x1A8),		/* Port 1 Serial ATA status */
+			P1DD, 4,
+			, 4,
+			P1IS, 4,
+			Offset(0x1AC),		/* Port 1 Serial ATA control */
+			P1DI, 4,
+			Offset(0x1B0),		/* Port 1 Serial ATA error */
+			, 16,
+			P1PR, 1,
+
+			/* Port 2 */
+			Offset(0x220),		/* Port 2 Task file status */
+			P2ER, 1,
+			, 2,
+			P2DQ, 1,
+			, 3,
+			P2BY, 1,
+			Offset(0x228),		/* Port 2 Serial ATA status */
+			P2DD, 4,
+			, 4,
+			P2IS, 4,
+			Offset(0x22C),		/* Port 2 Serial ATA control */
+			P2DI, 4,
+			Offset(0x230),		/* Port 2 Serial ATA error */
+			, 16,
+			P2PR, 1,
+
+			/* Port 3 */
+			Offset(0x2A0),		/* Port 3 Task file status */
+			P3ER, 1,
+			, 2,
+			P3DQ, 1,
+			, 3,
+			P3BY, 1,
+			Offset(0x2A8),		/* Port 3 Serial ATA status */
+			P3DD, 4,
+			, 4,
+			P3IS, 4,
+			Offset(0x2AC),		/* Port 3 Serial ATA control */
+			P3DI, 4,
+			Offset(0x2B0),		/* Port 3 Serial ATA error */
+			, 16,
+			P3PR, 1,
+		}
+	}
+
+	#include "acpi/routing.asl"
+
+	Scope(\_SB) {
+		Method(CkOT, 0){
+			if(LNotEqual(OSTP, Ones)) {Return(OSTP)}	/* OS version was already detected */
+			if(CondRefOf(\_OSI,Local1))
+			{
+				Store(1, OSTP)			/* Assume some form of XP */
+				if (\_OSI("Windows 2006"))      /* Vista */
+				{
+					Store(2, OSTP)
+				}
+			} else {
+				If(WCMP(\_OS,"Linux")) {
+					Store(3, OSTP)		/* Linux */
+				} Else {
+					Store(4, OSTP)		/* Gotta be WinCE */
+				}
+			}
+			Return(OSTP)
+		}
+
+		Method(_PIC, 0x01, NotSerialized)
+		{
+			If (Arg0)
+			{
+				\_SB.CIRQ()
+			}
+			Store(Arg0, PMOD)
+		}
+		Method(CIRQ, 0x00, NotSerialized){
+			Store(0, PINA)
+			Store(0, PINB)
+			Store(0, PINC)
+			Store(0, PIND)
+			Store(0, PINE)
+			Store(0, PINF)
+			Store(0, PING)
+			Store(0, PINH)
+		}
+
+		Name(IRQB, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Shared){15}
+		})
+
+		Name(IRQP, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
+		})
+
+		Name(PITF, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){9}
+		})
+
+		Device(INTA) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 1)
+
+			Method(_STA, 0) {
+				if (PINA) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTA._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_DIS\n") */
+				Store(0, PINA)
+			} /* End Method(_SB.INTA._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTA._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINA, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTA._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINA)
+			} /* End Method(_SB.INTA._SRS) */
+		} /* End Device(INTA) */
+
+		Device(INTB) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 2)
+
+			Method(_STA, 0) {
+				if (PINB) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTB._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_DIS\n") */
+				Store(0, PINB)
+			} /* End Method(_SB.INTB._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTB._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINB, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTB._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINB)
+			} /* End Method(_SB.INTB._SRS) */
+		} /* End Device(INTB)  */
+
+		Device(INTC) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 3)
+
+			Method(_STA, 0) {
+				if (PINC) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTC._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_DIS\n") */
+				Store(0, PINC)
+			} /* End Method(_SB.INTC._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTC._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINC, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTC._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINC)
+			} /* End Method(_SB.INTC._SRS) */
+		} /* End Device(INTC)  */
+
+		Device(INTD) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 4)
+
+			Method(_STA, 0) {
+				if (PIND) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTD._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_DIS\n") */
+				Store(0, PIND)
+			} /* End Method(_SB.INTD._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTD._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIND, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTD._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIND)
+			} /* End Method(_SB.INTD._SRS) */
+		} /* End Device(INTD)  */
+
+		Device(INTE) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 5)
+
+			Method(_STA, 0) {
+				if (PINE) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTE._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_DIS\n") */
+				Store(0, PINE)
+			} /* End Method(_SB.INTE._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTE._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINE, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTE._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINE)
+			} /* End Method(_SB.INTE._SRS) */
+		} /* End Device(INTE)  */
+
+		Device(INTF) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 6)
+
+			Method(_STA, 0) {
+				if (PINF) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTF._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_DIS\n") */
+				Store(0, PINF)
+			} /* End Method(_SB.INTF._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_PRS\n") */
+				Return(PITF)
+			} /* Method(_SB.INTF._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINF, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTF._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINF)
+			} /*  End Method(_SB.INTF._SRS) */
+		} /* End Device(INTF)  */
+
+		Device(INTG) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 7)
+
+			Method(_STA, 0) {
+				if (PING) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTG._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_DIS\n") */
+				Store(0, PING)
+			} /* End Method(_SB.INTG._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PING, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PING)
+			} /* End Method(_SB.INTG._SRS)  */
+		} /* End Device(INTG)  */
+
+		Device(INTH) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 8)
+
+			Method(_STA, 0) {
+				if (PINH) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTH._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_DIS\n") */
+				Store(0, PINH)
+			} /* End Method(_SB.INTH._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINH, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINH)
+			} /* End Method(_SB.INTH._SRS)  */
+		} /* End Device(INTH)   */
+
+	}   /* End Scope(_SB)  */
+
+
+	/* Supported sleep states: */
+	Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} )	/* (S0) - working state */
+
+	If (LAnd(SSFG, 0x01)) {
+		Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} )	/* (S1) - sleeping w/CPU context */
+	}
+	If (LAnd(SSFG, 0x02)) {
+		Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} )	/* (S2) - "light" Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x04)) {
+		Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} )	/* (S3) - Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x08)) {
+		Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} )	/* (S4) - Suspend to Disk */
+	}
+
+	Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} )	/* (S5) - Soft Off */
+
+	Name(\_SB.CSPS ,0)				/* Current Sleep State (S0, S1, S2, S3, S4, S5) */
+	Name(CSMS, 0)			/* Current System State */
+
+	/* Wake status package */
+	Name(WKST,Package(){Zero, Zero})
+
+	/*
+	* \_PTS - Prepare to Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+	*
+	* Exit:
+	*		-none-
+	*
+	* The _PTS control method is executed at the beginning of the sleep process
+	* for S1-S5. The sleeping value is passed to the _PTS control method.	This
+	* control method may be executed a relatively long time before entering the
+	* sleep state and the OS may abort	the operation without notification to
+	* the ACPI driver.  This method cannot modify the configuration or power
+	* state of any device in the system.
+	*/
+	Method(\_PTS, 1) {
+		/* DBGO("\\_PTS\n") */
+		/* DBGO("From S0 to S") */
+		/* DBGO(Arg0) */
+		/* DBGO("\n") */
+
+		/* Don't allow PCIRST# to reset USB */
+		if (LEqual(Arg0,3)){
+			Store(0,URRE)
+		}
+
+		/* Clear sleep SMI status flag and enable sleep SMI trap. */
+		/*Store(One, CSSM)
+		Store(One, SSEN)*/
+
+		/* On older chips, clear PciExpWakeDisEn */
+		/*if (LLessEqual(\_SB.SBRI, 0x13)) {
+		*    	Store(0,\_SB.PWDE)
+		*}
+		*/
+
+		/* Clear wake status structure. */
+		Store(0, Index(WKST,0))
+		Store(0, Index(WKST,1))
+		\_SB.PCI0.SIOS (Arg0)
+	} /* End Method(\_PTS) */
+
+	/*
+	*  The following method results in a "not a valid reserved NameSeg"
+	*  warning so I have commented it out for the duration.  It isn't
+	*  used, so it could be removed.
+	*
+	*
+	*  	\_GTS OEM Going To Sleep method
+	*
+	*  	Entry:
+	*  		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*  	Exit:
+	*  		-none-
+	*
+	*  Method(\_GTS, 1) {
+	*  DBGO("\\_GTS\n")
+	*  DBGO("From S0 to S")
+	*  DBGO(Arg0)
+	*  DBGO("\n")
+	*  }
+	*/
+
+	/*
+	*	\_BFS OEM Back From Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		-none-
+	*/
+	Method(\_BFS, 1) {
+		/* DBGO("\\_BFS\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+	}
+
+	/*
+	*  \_WAK System Wake method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		Return package of 2 DWords
+	*		Dword 1 - Status
+	*			0x00000000	wake succeeded
+	*			0x00000001	Wake was signaled but failed due to lack of power
+	*			0x00000002	Wake was signaled but failed due to thermal condition
+	*		Dword 2 - Power Supply state
+	*			if non-zero the effective S-state the power supply entered
+	*/
+	Method(\_WAK, 1) {
+		/* DBGO("\\_WAK\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+
+		/* Re-enable HPET */
+		Store(1,HPDE)
+
+		/* Restore PCIRST# so it resets USB */
+		if (LEqual(Arg0,3)){
+			Store(1,URRE)
+		}
+
+		/* Arbitrarily clear PciExpWakeStatus */
+		Store(PWST, PWST)
+
+		/* if(DeRefOf(Index(WKST,0))) {
+		*	Store(0, Index(WKST,1))
+		* } else {
+		*	Store(Arg0, Index(WKST,1))
+		* }
+		*/
+		\_SB.PCI0.SIOW (Arg0)
+		Return(WKST)
+	} /* End Method(\_WAK) */
+
+	Scope(\_GPE) {	/* Start Scope GPE */
+		/*  General event 0  */
+		Method(_L00) {
+		      //DBGO("\\_GPE\\_L00\n")
+		}
+
+		/*  General event 1  */
+		Method(_L01) {
+		      //DBGO("\\_GPE\\_L01\n")
+		}
+
+		/*  General event 2  */
+		Method(_L02) {
+		      //DBGO("\\_GPE\\_L02\n")
+		}
+
+		/*  General event 3  */
+		Method(_L03) {
+			//DBGO("\\_GPE\\_L00\n")
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  General event 4  */
+		Method(_L04) {
+		      //DBGO("\\_GPE\\_L04\n")
+		}
+
+		/*  General event 5  */
+		Method(_L05) {
+		      //DBGO("\\_GPE\\_L05\n")
+		}
+
+		/* _L06 General event 6 - Used for GPM6, moved to USB.asl */
+		/* _L07 General event 7 - Used for GPM7, moved to USB.asl */
+
+		/*  Legacy PM event  */
+		Method(_L08) {
+			//DBGO("\\_GPE\\_L08\n")
+		}
+
+		/*  Temp warning (TWarn) event  */
+		Method(_L09) {
+			//DBGO("\\_GPE\\_L09\n")
+			Notify (\_TZ.TZ00, 0x80)
+		}
+
+		/*  Reserved  */
+		Method(_L0A) {
+		      //DBGO("\\_GPE\\_L0A\n")
+		}
+
+		/*  USB controller PME#  */
+		Method(_L0B) {
+			//DBGO("\\_GPE\\_L0B\n")
+			Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  AC97 controller PME#  */
+		Method(_L0C) {
+		      //DBGO("\\_GPE\\_L0C\n")
+		}
+
+		/*  OtherTherm PME#  */
+		Method(_L0D) {
+		      //DBGO("\\_GPE\\_L0D\n")
+		}
+
+		/* _L0E GPM9 SCI event - Moved to USB.asl */
+
+		/*  PCIe HotPlug event  */
+		Method(_L0F) {
+			//DBGO("\\_GPE\\_L0F\n")
+		}
+
+		/*  ExtEvent0 SCI event  */
+		Method(_L10) {
+			//DBGO("\\_GPE\\_L10\n")
+		}
+
+
+		/*  ExtEvent1 SCI event  */
+		Method(_L11) {
+			//DBGO("\\_GPE\\_L11\n")
+		}
+
+		/*  PCIe PME# event  */
+		Method(_L12) {
+		      //DBGO("\\_GPE\\_L12\n")
+		}
+
+		/* _L13 GPM0 SCI event - Moved to USB.asl */
+		/* _L14 GPM1 SCI event - Moved to USB.asl */
+		/* _L15 GPM2 SCI event - Moved to USB.asl */
+		/* _L16 GPM3 SCI event - Moved to USB.asl */
+		/* _L17 GPM8 SCI event - Moved to USB.asl */
+
+		/*  GPIO0 or GEvent8 event  */
+		Method(_L18) {
+			//DBGO("\\_GPE\\_L18\n")
+			Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBRb, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBRc, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBRd, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/* _L19 GPM4 SCI event - Moved to USB.asl */
+		/* _L1A GPM5 SCI event - Moved to USB.asl */
+
+		/*  Azalia SCI event  */
+		Method(_L1B) {
+			//DBGO("\\_GPE\\_L1B\n")
+			Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  GPM6 SCI event - Reassigned to _L06 */
+		Method(_L1C) {
+		      //DBGO("\\_GPE\\_L1C\n")
+		}
+
+		/*  GPM7 SCI event - Reassigned to _L07 */
+		Method(_L1D) {
+		      //DBGO("\\_GPE\\_L1D\n")
+		}
+
+		/*  GPIO2 or GPIO66 SCI event  */
+		Method(_L1E) {
+			//DBGO("\\_GPE\\_L1E\n")
+		}
+
+		/* _L1F SATA SCI event - Moved to sata.asl */
+
+	} 	/* End Scope GPE */
+
+	#include "acpi/usb.asl"
+
+	/* System Bus */
+	Scope(\_SB) { /* Start \_SB scope */
+		#include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */
+
+		/*  _SB.PCI0 */
+		/* Note: Only need HID on Primary Bus */
+		Device(PCI0) {
+			External (TOM1) //assigned when update_ssdt()
+			External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */
+
+			Name(_HID, EISAID("PNP0A03"))
+			Name(_ADR, 0x00180000)	/* Dev# = BSP Dev#, Func# = 0 */
+			Method(_BBN, 0) { /* Bus number = 0 */
+				Return(0)
+			}
+			Method(_STA, 0) {
+				/* DBGO("\\_SB\\PCI0\\_STA\n") */
+				Return(0x0B)     /* Status is visible */
+			}
+
+			Method(_PRT,0) {
+				If(PMOD){ Return(APR0) }	/* APIC mode */
+				Return (PR0)			/* PIC Mode */
+			} /* end _PRT */
+
+			/* Describe the Northbridge devices */
+			Device(AMRT) {
+				Name(_ADR, 0x00000000)
+			} /* end AMRT */
+
+			/* The external GFX bridge */
+			Device(PBR2) {
+				Name(_ADR, 0x00020000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS2) }	/* APIC mode */
+					Return (PS2)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR2 */
+
+			/* Dev3 is also an external GFX bridge */
+
+			Device(PBR4) {
+				Name(_ADR, 0x00040000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS4) }	/* APIC mode */
+					Return (PS4)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR4 */
+
+			Device(PBRb) {
+				Name(_ADR, 0x000b0000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APSb) }	/* APIC mode */
+					Return (PSb)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBRb */
+
+			Device(PBRc) {
+				Name(_ADR, 0x000c0000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APSc) }	/* APIC mode */
+					Return (PSc)			/* PIC Mode */
+				} /* end _PRT */
+			} /* end PBRc */
+
+			Device(PBRd) {
+				Name(_ADR, 0x000d0000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APSd) }	/* APIC mode */
+					Return (PSd)			/*  PIC Mode */
+				} /* end _PRT */
+			} /* end PBRd */
+
+			/* Describe the Southbridge devices */
+			Device(STCR) {
+				Name(_ADR, 0x00110000)
+				#include "acpi/sata.asl"
+			} /* end STCR */
+
+			Device(UOH1) {
+				Name(_ADR, 0x00130000)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH1 */
+
+			Device(UOH2) {
+				Name(_ADR, 0x00130001)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH2 */
+
+			Device(UOH3) {
+				Name(_ADR, 0x00130002)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH3 */
+
+			Device(UOH4) {
+				Name(_ADR, 0x00130003)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH4 */
+
+			Device(UOH5) {
+				Name(_ADR, 0x00130004)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH5 */
+
+			Device(UEH1) {
+				Name(_ADR, 0x00130005)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UEH1 */
+
+			Device(SBUS) {
+				Name(_ADR, 0x00140000)
+			} /* end SBUS */
+
+			/* Primary (and only) IDE channel */
+			Device(IDEC) {
+				Name(_ADR, 0x00140001)
+				#include "acpi/ide.asl"
+			} /* end IDEC */
+
+			Device(AZHD) {
+				Name(_ADR, 0x00140002)
+				OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
+					Field(AZPD, AnyAcc, NoLock, Preserve) {
+					offset (0x42),
+					NSDI, 1,
+					NSDO, 1,
+					NSEN, 1,
+					offset (0x44),
+					IPCR, 4,
+					offset (0x54),
+					PWST, 2,
+					, 6,
+					PMEB, 1,
+					, 6,
+					PMST, 1,
+					offset (0x62),
+					MMCR, 1,
+					offset (0x64),
+					MMLA, 32,
+					offset (0x68),
+					MMHA, 32,
+					offset (0x6C),
+					MMDT, 16,
+				}
+
+				Method(_INI) {
+					If(LEqual(OSTP,3)){   /* If we are running Linux */
+						Store(zero, NSEN)
+						Store(one, NSDO)
+						Store(one, NSDI)
+					}
+				}
+			} /* end AZHD */
+
+			Device(LIBR) {
+				Name(_ADR, 0x00140003)
+				/* Method(_INI) {
+				*	DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
+				} */ /* End Method(_SB.SBRDG._INI) */
+
+				/* Real Time Clock Device */
+				Device(RTC0) {
+					Name(_HID, EISAID("PNP0B00"))	/* AT Real Time Clock (not PIIX4 compatible) */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){8}
+						IO(Decode16,0x0070, 0x0070, 0, 2)
+						/* IO(Decode16,0x0070, 0x0070, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
+
+				Device(TMR) {	/* Timer */
+					Name(_HID,EISAID("PNP0100"))	/* System Timer */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){0}
+						IO(Decode16, 0x0040, 0x0040, 0, 4)
+						/* IO(Decode16, 0x0048, 0x0048, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
+
+				Device(SPKR) {	/* Speaker */
+					Name(_HID,EISAID("PNP0800"))	/* AT style speaker */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x0061, 0x0061, 0, 1)
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
+
+				Device(PIC) {
+					Name(_HID,EISAID("PNP0000"))	/* AT Interrupt Controller */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){2}
+						IO(Decode16,0x0020, 0x0020, 0, 2)
+						IO(Decode16,0x00A0, 0x00A0, 0, 2)
+						/* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
+						/* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
+
+				Device(MAD) { /* 8257 DMA */
+					Name(_HID,EISAID("PNP0200"))	/* Hardware Device ID */
+					Name(_CRS, ResourceTemplate() {
+						DMA(Compatibility,BusMaster,Transfer8){4}
+						IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
+						IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
+						IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
+						IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
+						IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
+						IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
+					}) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
+				} /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
+
+				Device(COPR) {
+					Name(_HID,EISAID("PNP0C04"))	/* Math Coprocessor */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
+						IRQNoFlags(){13}
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+
+				Device (PS2M) {
+					Name (_HID, EisaId ("PNP0F13"))
+					Name (_CRS, ResourceTemplate () {
+						IO (Decode16, 0x0060, 0x0060, 0x00, 0x01)
+						IO (Decode16, 0x0064, 0x0064, 0x00, 0x01)
+						IRQNoFlags () {12}
+					})
+					Method (_STA, 0, NotSerialized) {
+						And (FLG0, 0x04, Local0)
+						If (LEqual (Local0, 0x04)) {
+							Return (0x0F)
+						} Else {
+							Return (0x00)
+						}
+					}
+				}
+
+				Device (PS2K) {
+					Name (_HID, EisaId ("PNP0303"))
+					Method (_STA, 0, NotSerialized) {
+						And (FLG0, 0x04, Local0)
+						If (LEqual (Local0, 0x04)) {
+							Return (0x0F)
+						} Else {
+							Return (0x00)
+						}
+					}
+					Name (_CRS, ResourceTemplate () {
+						IO (Decode16, 0x0060, 0x0060, 0x00, 0x01)
+						IO (Decode16, 0x0064, 0x0064, 0x00, 0x01)
+						IRQNoFlags () {1}
+					})
+				}
+
+#if 0 //acpi_create_hpet
+				Device(HPET) {
+					Name(_HID,EISAID("PNP0103"))
+					Name(CRS, ResourceTemplate() {
+		    				IRQNoFlags () {0}
+		    				IRQNoFlags () {2}
+		   			 	IRQNoFlags () {8}
+						Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, MNT)	/* 1kb reserved space */
+					})
+					Method(_STA, 0, NotSerialized) {
+						Return(0x0F) /* sata is visible */
+					}
+					Method(_CRS, 0, NotSerialized) {
+						CreateDwordField(CRS, ^MNT._BAS, HPT)
+						Store(HPBA, HPT)
+						Return(CRS)
+					}
+				} /* End Device(_SB.PCI0.LIBR.HPET) */
+#endif
+			} /* end LIBR */
+
+			Device(HPBR) {
+				Name(_ADR, 0x00140004)
+			} /* end HostPciBr */
+
+			Device(ACAD) {
+				Name(_ADR, 0x00140005)
+			} /* end Ac97audio */
+
+			Device(ACMD) {
+				Name(_ADR, 0x00140006)
+			} /* end Ac97modem */
+
+			/* ITE8718 Support */
+			OperationRegion (IOID, SystemIO, 0x2E, 0x02)	/* sometimes it is 0x4E */
+				Field (IOID, ByteAcc, NoLock, Preserve)
+				{
+					SIOI,   8,    SIOD,   8		/* 0x2E and 0x2F */
+				}
+
+			IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve)
+			{
+					Offset (0x07),
+				LDN,	8,	/* Logical Device Number */
+					Offset (0x20),
+				CID1,	8,	/* Chip ID Byte 1, 0x87 */
+				CID2,	8,	/* Chip ID Byte 2, 0x12 */
+					Offset (0x30),
+				ACTR,	8,	/* Function activate */
+					Offset (0xF0),
+				APC0,	8,	/* APC/PME Event Enable Register */
+				APC1,	8,	/* APC/PME Status Register */
+				APC2,	8,	/* APC/PME Control Register 1 */
+				APC3,	8,	/* Environment Controller Special Configuration Register */
+				APC4,	8	/* APC/PME Control Register 2 */
+			}
+
+			/* Enter the 8718 MB PnP Mode */
+			Method (EPNP)
+			{
+				Store(0x87, SIOI)
+				Store(0x01, SIOI)
+				Store(0x55, SIOI)
+				Store(0x55, SIOI) /* 8718 magic number */
+			}
+			/* Exit the 8718 MB PnP Mode */
+			Method (XPNP)
+			{
+				Store (0x02, SIOI)
+				Store (0x02, SIOD)
+			}
+			/*
+			 * Keyboard PME is routed to SB700 Gevent3. We can wake
+			 * up the system by pressing the key.
+			 */
+			Method (SIOS, 1)
+			{
+				/* We only enable KBD PME for S5. */
+				If (LLess (Arg0, 0x05))
+				{
+					EPNP()
+					/* DBGO("8718F\n") */
+
+					Store (0x4, LDN)
+					Store (One, ACTR)  /* Enable EC */
+					/*
+					Store (0x4, LDN)
+					Store (0x04, APC4)
+					*/  /* falling edge. which mode? Not sure. */
+
+					Store (0x4, LDN)
+					Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */
+					Store (0x4, LDN)
+					Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */
+
+					XPNP()
+				}
+			}
+			Method (SIOW, 1)
+			{
+				EPNP()
+				Store (0x4, LDN)
+				Store (Zero, APC0) /* disable keyboard PME */
+				Store (0x4, LDN)
+				Store (0xFF, APC1) /* clear keyboard PME status */
+				XPNP()
+			}
+
+			Name (CRS, ResourceTemplate ()
+			{
+				WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+					0x0000,             // Granularity
+					0x0000,             // Range Minimum
+					0x00FF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x0100,             // Length
+					,,)
+				IO (Decode16,
+					0x0CF8,             // Range Minimum
+					0x0CF8,             // Range Maximum
+					0x01,               // Alignment
+					0x08,               // Length
+					)
+
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x0000,             // Range Minimum
+					0x03AF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x03B0,             // Length
+					,, , TypeStatic)
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x03E0,             // Range Minimum
+					0x0CF7,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x0918,             // Length
+					,, , TypeStatic)
+
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x03B0,             // Range Minimum
+					0x03BB,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x000C,             // Length
+					,, , TypeStatic)
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x03C0,             // Range Minimum
+					0x03DF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0x0020,             // Length
+					,, , TypeStatic)
+				WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,             // Granularity
+					0x0D00,             // Range Minimum
+					0xFFFF,             // Range Maximum
+					0x0000,             // Translation Offset
+					0xF300,             // Length
+					,, , TypeStatic)
+				Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) 	// VGA memory space
+
+				Memory32Fixed (ReadOnly,
+						0xE0000000,         // Address Base
+						0x10000000,         // Address Length, (1MB each Bus, 256 Buses by default)
+						MMIO)
+			})
+
+			Method (_CRS, 0, NotSerialized)
+			{
+				CreateDWordField (CRS, \_SB.PCI0.MMIO._BAS, BAS1)
+				CreateDWordField (CRS, \_SB.PCI0.MMIO._LEN, LEN1)
+
+                                /*
+                                 * Declare memory between TOM1 and 4GB as available
+                                 * for PCI MMIO.
+                                 * Use ShiftLeft to avoid 64bit constant (for XP).
+                                 * This will work even if the OS does 32bit arithmetic, as
+                                 * 32bit (0x00000000 - TOM1) will wrap and give the same
+                                 * result as 64bit (0x100000000 - TOM1).
+                                 */
+				Store(TOM1, BAS1)
+                                ShiftLeft(0x10000000, 4, Local0)
+                                Subtract(Local0, TOM1, Local0)
+                                Store(Local0, LEN1)
+				//DBGO(TOM1)
+
+				Return (CRS)
+			}
+
+			/*
+			 *
+			 *               FIRST METHOD CALLED UPON BOOT
+			 *
+			 *  1. If debugging, print current OS and ACPI interpreter.
+			 *  2. Get PCI Interrupt routing from ACPI VSM, this
+			 *     value is based on user choice in BIOS setup.
+			 */
+			Method(_INI, 0) {
+				/* DBGO("\\_SB\\_INI\n") */
+				/* DBGO("   DSDT.ASL code from ") */
+				/* DBGO(__DATE__) */
+				/* DBGO(" ") */
+				/* DBGO(__TIME__) */
+				/* DBGO("\n   Sleep states supported: ") */
+				/* DBGO("\n") */
+				/* DBGO("   \\_OS=") */
+				/* DBGO(\_OS) */
+				/* DBGO("\n   \\_REV=") */
+				/* DBGO(\_REV) */
+				/* DBGO("\n") */
+
+				/* Determine the OS we're running on */
+				CkOT()
+				/* On older chips, clear PciExpWakeDisEn */
+				/*if (LLessEqual(\SBRI, 0x13)) {
+				 *    	Store(0,\PWDE)
+				 *}
+				 */
+			} /* End Method(_SB._INI) */
+		} /* End Device(PCI0)  */
+
+		Device(PWRB) {	/* Start Power button device */
+			Name(_HID, EISAID("PNP0C0C"))
+			Name(_UID, 0xAA)
+			Name(_PRW, Package () {3, 0x04})	/* wake from S1-S4 */
+			Name(_STA, 0x0B) /* sata is invisible */
+		}
+	} /* End \_SB scope */
+
+	Scope(\_SI) {
+		Method(_SST, 1) {
+			/* DBGO("\\_SI\\_SST\n") */
+			/* DBGO("   New Indicator state: ") */
+			/* DBGO(Arg0) */
+			/* DBGO("\n") */
+		}
+	} /* End Scope SI */
+
+	/* SMBUS Support */
+	Mutex (SBX0, 0x00)
+	OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
+		Field (SMB0, ByteAcc, NoLock, Preserve) {
+			HSTS,   8, /* SMBUS status */
+			SSTS,   8,  /* SMBUS slave status */
+			HCNT,   8,  /* SMBUS control */
+			HCMD,   8,  /* SMBUS host cmd */
+			HADD,   8,  /* SMBUS address */
+			DAT0,   8,  /* SMBUS data0 */
+			DAT1,   8,  /* SMBUS data1 */
+			BLKD,   8,  /* SMBUS block data */
+			SCNT,   8,  /* SMBUS slave control */
+			SCMD,   8,  /* SMBUS shaow cmd */
+			SEVT,   8,  /* SMBUS slave event */
+			SDAT,   8  /* SMBUS slave data */
+	}
+
+	Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
+		Store (0x1E, HSTS)
+		Store (0xFA, Local0)
+		While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
+			Stall (0x64)
+			Decrement (Local0)
+		}
+
+		Return (Local0)
+	}
+
+	Method (SWTC, 1, NotSerialized) {
+		Store (Arg0, Local0)
+		Store (0x07, Local2)
+		Store (One, Local1)
+		While (LEqual (Local1, One)) {
+			Store (And (HSTS, 0x1E), Local3)
+			If (LNotEqual (Local3, Zero)) { /* read sucess */
+				If (LEqual (Local3, 0x02)) {
+					Store (Zero, Local2)
+				}
+
+				Store (Zero, Local1)
+			}
+			Else {
+				If (LLess (Local0, 0x0A)) { /* read failure */
+					Store (0x10, Local2)
+					Store (Zero, Local1)
+				}
+				Else {
+					Sleep (0x0A) /* 10 ms, try again */
+					Subtract (Local0, 0x0A, Local0)
+				}
+			}
+		}
+
+		Return (Local2)
+	}
+
+	Method (SMBR, 3, NotSerialized) {
+		Store (0x07, Local0)
+		If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
+			Store (WCLR (), Local0) /* clear SMBUS status register before read data */
+			If (LEqual (Local0, Zero)) {
+				Release (SBX0)
+				Return (0x0)
+			}
+
+			Store (0x1F, HSTS)
+			Store (Or (ShiftLeft (Arg1, One), One), HADD)
+			Store (Arg2, HCMD)
+			If (LEqual (Arg0, 0x07)) {
+				Store (0x48, HCNT) /* read byte */
+			}
+
+			Store (SWTC (0x03E8), Local1) /* 1000 ms */
+			If (LEqual (Local1, Zero)) {
+				If (LEqual (Arg0, 0x07)) {
+					Store (DAT0, Local0)
+				}
+			}
+			Else {
+				Store (Local1, Local0)
+			}
+
+			Release (SBX0)
+		}
+
+		/* DBGO("the value of SMBusData0 register ") */
+		/* DBGO(Arg2) */
+		/* DBGO(" is ") */
+		/* DBGO(Local0) */
+		/* DBGO("\n") */
+
+		Return (Local0)
+	}
+
+	/* THERMAL */
+	Scope(\_TZ) {
+		Name (KELV, 2732)
+		Name (THOT, 800)
+		Name (TCRT, 850)
+
+		ThermalZone(TZ00) {
+			Method(_AC0,0) {	/* Active Cooling 0 (0=highest fan speed) */
+				/* DBGO("\\_TZ\\TZ00\\_AC0\n") */
+				Return(Add(0, 2730))
+			}
+			Method(_AL0,0) {	/* Returns package of cooling device to turn on */
+				/* DBGO("\\_TZ\\TZ00\\_AL0\n") */
+				Return(Package() {\_TZ.TZ00.FAN0})
+			}
+			Device (FAN0) {
+				Name(_HID, EISAID("PNP0C0B"))
+				Name(_PR0, Package() {PFN0})
+			}
+
+			PowerResource(PFN0,0,0) {
+				Method(_STA) {
+					Store(0xF,Local0)
+					Return(Local0)
+				}
+				Method(_ON) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
+				}
+				Method(_OFF) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
+				}
+			}
+
+			Method(_HOT,0) {	/* return hot temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_HOT\n") */
+				Return (Add (THOT, KELV))
+			}
+			Method(_CRT,0) {	/* return critical temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_CRT\n") */
+				Return (Add (TCRT, KELV))
+			}
+			Method(_TMP,0) {	/* return current temp of this zone */
+				Store (SMBR (0x07, 0x4C,, 0x00), Local0)
+				If (LGreater (Local0, 0x10)) {
+					Store (Local0, Local1)
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400, KELV))
+				}
+
+				Store (SMBR (0x07, 0x4C, 0x01), Local0)
+				/* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
+				/* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
+				If (LGreater (Local0, 0x10)) {
+					If (LGreater (Local0, Local1)) {
+						Store (Local0, Local1)
+					}
+
+					Multiply (Local1, 10, Local1)
+					Return (Add (Local1, KELV))
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400 , KELV))
+				}
+			} /* end of _TMP */
+		} /* end of TZ00 */
+	}
+}
+/* End of ASL file */
diff --git a/src/mainboard/tyan/s8226/fadt.c b/src/mainboard/tyan/s8226/fadt.c
new file mode 100644
index 0000000..0c63162
--- /dev/null
+++ b/src/mainboard/tyan/s8226/fadt.c
@@ -0,0 +1,174 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ */
+
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include "Platform.h" /*sb700 platform header*/
+
+#ifndef ACPI_BLK_BASE
+  #define ACPI_BLK_BASE	PM1_EVT_BLK_ADDRESS
+#endif
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+	acpi_header_t *header = &(fadt->header);
+
+	printk(BIOS_DEBUG, "ACPI_BLK_BASE: 0x%04x\n", ACPI_BLK_BASE);
+	/* Prepare the header */
+	memset((void *)fadt, 0, sizeof(acpi_fadt_t));
+	memcpy(header->signature, "FACP", 4);
+	header->length = 244;
+	header->revision = 3;
+	memcpy(header->oem_id, OEM_ID, 6);
+	memcpy(header->oem_table_id, "AMD     ", 8);
+	memcpy(header->asl_compiler_id, ASLC, 4);
+	header->asl_compiler_revision = 0;
+
+	fadt->firmware_ctrl = (u32) facs;
+	fadt->dsdt = (u32) dsdt;
+	/* 3=Workstation,4=Enterprise Server, 7=Performance Server */
+	fadt->preferred_pm_profile = 0x03;
+	fadt->sci_int = 9;
+	/* disable system management mode by setting to 0: */
+	fadt->smi_cmd = 0;
+	fadt->acpi_enable = 0xf0;
+	fadt->acpi_disable = 0xf1;
+	fadt->s4bios_req = 0x0;
+	fadt->pstate_cnt = 0xe2;
+
+	/* RTC_En_En, TMR_En_En, GBL_EN_EN */
+	outl(0x1, PM1_CNT_BLK_ADDRESS);           /* set SCI_EN */
+	fadt->pm1a_evt_blk = PM1_EVT_BLK_ADDRESS;
+	fadt->pm1b_evt_blk = 0x0000;
+	fadt->pm1a_cnt_blk = PM1_CNT_BLK_ADDRESS;
+	fadt->pm1b_cnt_blk = 0x0000;
+	fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK_ADDRESS;
+	fadt->pm_tmr_blk = PM1_TMR_BLK_ADDRESS;
+	fadt->gpe0_blk = GPE0_BLK_ADDRESS;
+	fadt->gpe1_blk = 0x0000;	/* we dont have gpe1 block, do we? */
+
+	fadt->pm1_evt_len = 4;
+	fadt->pm1_cnt_len = 2;
+	fadt->pm2_cnt_len = 1;
+	fadt->pm_tmr_len = 4;
+	fadt->gpe0_blk_len = 8;
+	fadt->gpe1_blk_len = 0;
+	fadt->gpe1_base = 0;
+
+	fadt->cst_cnt = 0xe3;
+	fadt->p_lvl2_lat = 101;
+	fadt->p_lvl3_lat = 1001;
+	fadt->flush_size = 0;
+	fadt->flush_stride = 0;
+	fadt->duty_offset = 1;
+	fadt->duty_width = 3;
+	fadt->day_alrm = 0;	/* 0x7d these have to be */
+	fadt->mon_alrm = 0;	/* 0x7e added to cmos.layout */
+	fadt->century = 0;	/* 0x7f to make rtc alrm work */
+	fadt->iapc_boot_arch = 0x3;	/* See table 5-11 */
+	fadt->flags = 0x0001c1a5;/* 0x25; */
+
+	fadt->res2 = 0;
+
+	fadt->reset_reg.space_id = 1;
+	fadt->reset_reg.bit_width = 8;
+	fadt->reset_reg.bit_offset = 0;
+	fadt->reset_reg.resv = 0;
+	fadt->reset_reg.addrl = 0xcf9;
+	fadt->reset_reg.addrh = 0x0;
+
+	fadt->reset_value = 6;
+	fadt->x_firmware_ctl_l = (u32) facs;
+	fadt->x_firmware_ctl_h = 0;
+	fadt->x_dsdt_l = (u32) dsdt;
+	fadt->x_dsdt_h = 0;
+
+	fadt->x_pm1a_evt_blk.space_id = 1;
+	fadt->x_pm1a_evt_blk.bit_width = 32;
+	fadt->x_pm1a_evt_blk.bit_offset = 0;
+	fadt->x_pm1a_evt_blk.resv = 0;
+	fadt->x_pm1a_evt_blk.addrl = PM1_EVT_BLK_ADDRESS;
+	fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_evt_blk.space_id = 1;
+	fadt->x_pm1b_evt_blk.bit_width = 4;
+	fadt->x_pm1b_evt_blk.bit_offset = 0;
+	fadt->x_pm1b_evt_blk.resv = 0;
+	fadt->x_pm1b_evt_blk.addrl = 0x0;
+	fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+
+	fadt->x_pm1a_cnt_blk.space_id = 1;
+	fadt->x_pm1a_cnt_blk.bit_width = 16;
+	fadt->x_pm1a_cnt_blk.bit_offset = 0;
+	fadt->x_pm1a_cnt_blk.resv = 0;
+	fadt->x_pm1a_cnt_blk.addrl = PM1_CNT_BLK_ADDRESS;
+	fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_cnt_blk.space_id = 1;
+	fadt->x_pm1b_cnt_blk.bit_width = 2;
+	fadt->x_pm1b_cnt_blk.bit_offset = 0;
+	fadt->x_pm1b_cnt_blk.resv = 0;
+	fadt->x_pm1b_cnt_blk.addrl = 0x0;
+	fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+
+	fadt->x_pm2_cnt_blk.space_id = 1;
+	fadt->x_pm2_cnt_blk.bit_width = 0;
+	fadt->x_pm2_cnt_blk.bit_offset = 0;
+	fadt->x_pm2_cnt_blk.resv = 0;
+	fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK_ADDRESS;
+	fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+
+	fadt->x_pm_tmr_blk.space_id = 1;
+	fadt->x_pm_tmr_blk.bit_width = 32;
+	fadt->x_pm_tmr_blk.bit_offset = 0;
+	fadt->x_pm_tmr_blk.resv = 0;
+	fadt->x_pm_tmr_blk.addrl = PM1_TMR_BLK_ADDRESS;
+	fadt->x_pm_tmr_blk.addrh = 0x0;
+
+
+	fadt->x_gpe0_blk.space_id = 1;
+	fadt->x_gpe0_blk.bit_width = 32;
+	fadt->x_gpe0_blk.bit_offset = 0;
+	fadt->x_gpe0_blk.resv = 0;
+	fadt->x_gpe0_blk.addrl = GPE0_BLK_ADDRESS;
+	fadt->x_gpe0_blk.addrh = 0x0;
+
+
+	fadt->x_gpe1_blk.space_id = 1;
+	fadt->x_gpe1_blk.bit_width = 0;
+	fadt->x_gpe1_blk.bit_offset = 0;
+	fadt->x_gpe1_blk.resv = 0;
+	fadt->x_gpe1_blk.addrl = 0;
+	fadt->x_gpe1_blk.addrh = 0x0;
+
+	header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+}
+
diff --git a/src/mainboard/tyan/s8226/get_bus_conf.c b/src/mainboard/tyan/s8226/get_bus_conf.c
new file mode 100644
index 0000000..5171c45
--- /dev/null
+++ b/src/mainboard/tyan/s8226/get_bus_conf.c
@@ -0,0 +1,144 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include "agesawrapper.h"
+#if CONFIG_AMD_SB_CIMX
+#include <sb_cimx.h>
+#endif
+
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+ * and acpi_tables busnum is default.
+ */
+u8 bus_isa;
+u8 bus_sp5100[2];
+u8 bus_sr5650[14];
+
+
+u32 bus_type[256];
+
+u32 sbdn_sr5650;
+u32 sbdn_sp5100;
+
+void get_bus_conf(void);
+static u32 get_bus_conf_done = 0;
+
+void get_bus_conf(void)
+{
+	u32 status;
+
+	device_t dev;
+	int i, j;
+
+	if (get_bus_conf_done == 1)
+		return;   /* do it only once */
+
+	get_bus_conf_done = 1;
+
+	/*
+	 * This is the call to AmdInitLate.  It is really in the wrong place, conceptually,
+	 * but functionally within the coreboot model, this is the best place to make the
+	 * call.  The logically correct place to call AmdInitLate is after PCI scan is done,
+	 * after the decision about S3 resume is made, and before the system tables are
+	 * written into RAM.  The routine that is responsible for writing the tables is
+	 * "write_tables", called near the end of "hardwaremain".  There is no platform
+	 * specific entry point between the S3 resume decision point and the call to
+	 * "write_tables", and the next platform specific entry points are the calls to
+	 * the ACPI table write functions.  The first of ose would seem to be the right
+	 * place, but other table write functions, e.g. the PIRQ table write function, are
+	 * called before the ACPI tables are written.  This routine is called at the beginning
+	 * of each of the write functions called prior to the ACPI write functions, so this
+	 * becomes the best place for this call.
+	 */
+	status = agesawrapper_amdinitlate();
+	if(status) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+	}
+
+	sbdn_sp5100 = 0;
+
+	for (i = 0; i < 0; i++) {
+		bus_sp5100[i] = 0;
+	}
+	for (i = 0; i < ARRAY_SIZE(bus_sr5650); i++) {
+		bus_sr5650[i] = 0;
+	}
+
+	for (i = 0; i < 256; i++) {
+		bus_type[i] = 0; /* default ISA bus. */
+	}
+
+	bus_type[0] = 1;  /* pci */
+
+	bus_sr5650[0] = 0;
+	bus_sp5100[0] = bus_sr5650[0];
+
+	/* sp5100 */
+	dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4));
+
+	if (dev) {
+		bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+		bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+		bus_isa++;
+		for (j = bus_sp5100[1]; j < bus_isa; j++)
+			bus_type[j] = 1;
+	}
+
+	/* sr5650 */
+	for (i = 1; i < ARRAY_SIZE(bus_sr5650); i++) {
+		dev = dev_find_slot(bus_sr5650[0], PCI_DEVFN(sbdn_sr5650 + i, 0));
+		if (dev) {
+			bus_sr5650[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			if(255 != bus_sr5650[i]) {
+				bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+				bus_isa++;
+				bus_type[bus_sr5650[i]] = 1; /* PCI bus. */
+			}
+		}
+	}
+
+/*
+	for (i = 0; i < 4; i++) {
+		dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, i));
+		if (dev) {
+			bus_sp5100[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+			bus_isa++;
+		}
+	}
+	for (j = bus_sp5100[2]; j < bus_isa; j++)
+		bus_type[j] = 1;
+*/
+
+
+	/* I/O APICs:   APIC ID Version State   Address */
+	bus_isa = 10;
+
+#if CONFIG_AMD_SB_CIMX
+	sb_After_Pci_Init();
+	sb_Late_Post();
+#endif
+}
diff --git a/src/mainboard/tyan/s8226/irq_tables.c b/src/mainboard/tyan/s8226/irq_tables.c
new file mode 100644
index 0000000..11e5256
--- /dev/null
+++ b/src/mainboard/tyan/s8226/irq_tables.c
@@ -0,0 +1,122 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+		u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+		u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+		u8 slot, u8 rfu)
+{
+	pirq_info->bus = bus;
+	pirq_info->devfn = devfn;
+	pirq_info->irq[0].link = link0;
+	pirq_info->irq[0].bitmap = bitmap0;
+	pirq_info->irq[1].link = link1;
+	pirq_info->irq[1].bitmap = bitmap1;
+	pirq_info->irq[2].link = link2;
+	pirq_info->irq[2].bitmap = bitmap2;
+	pirq_info->irq[3].link = link3;
+	pirq_info->irq[3].bitmap = bitmap3;
+	pirq_info->slot = slot;
+	pirq_info->rfu = rfu;
+}
+extern u8 bus_isa;
+extern u8 bus_sp5100[2];
+extern unsigned long sbdn_sp5100;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+
+	struct irq_routing_table *pirq;
+	struct irq_info *pirq_info;
+	u32 slot_num;
+	u8 *v;
+
+	u8 sum = 0;
+	int i;
+
+
+	get_bus_conf();		/* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+
+	/* Align the table to be 16 byte aligned. */
+	addr += 15;
+	addr &= ~15;
+
+	/* This table must be betweeen 0xf0000 & 0x100000 */
+	printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+	pirq = (void *)(addr);
+	v = (u8 *) (addr);
+
+	pirq->signature = PIRQ_SIGNATURE;
+	pirq->version = PIRQ_VERSION;
+
+	pirq->rtr_bus = bus_sp5100[0];
+	pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4;
+
+	pirq->exclusive_irqs = 0;
+
+	pirq->rtr_vendor = 0x1002;
+	pirq->rtr_device = 0x4384;
+
+	pirq->miniport_data = 0;
+
+	memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+	pirq_info = (void *)(&pirq->checksum + 1);
+	slot_num = 0;
+
+
+	/* pci bridge */
+	write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4,
+			0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+			0);
+	pirq_info++;
+
+
+
+	slot_num++;
+
+
+
+	pirq->size = 32 + 16 * slot_num;
+
+	for (i = 0; i < pirq->size; i++)
+		sum += v[i];
+
+	sum = pirq->checksum - sum;
+
+	if (sum != pirq->checksum) {
+		pirq->checksum = sum;
+	}
+
+	printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+	return (unsigned long)pirq_info;
+
+}
diff --git a/src/mainboard/tyan/s8226/mainboard.c b/src/mainboard/tyan/s8226/mainboard.c
new file mode 100644
index 0000000..9190feb
--- /dev/null
+++ b/src/mainboard/tyan/s8226/mainboard.c
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <boot/tables.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <NbPlatform.h>
+#include "chip.h"
+
+void set_pcie_dereset(void *nbconfig);
+void set_pcie_reset(void *nbconfig);
+
+/**
+ *
+ */
+void set_pcie_reset(void *nbconfig)
+{
+}
+
+/**
+ * Mainboard specific RD890 CIMx callback
+ * Release Resets to PCIe Links
+ * For Both SR56X0 chips, PCIE_RESET_GPIO1 to reset pcie
+ */
+void set_pcie_dereset(void *nbconfig)
+{
+	//u32 nb_dev = MAKE_SBDFO(0, 0x0, 0x0, 0x0, 0x0);
+	u32 i;
+	u32 val;
+	u32 nb_addr;
+
+	val = 0x00000007UL;
+	AMD_NB_CONFIG_BLOCK *pConfig = (AMD_NB_CONFIG_BLOCK*)nbconfig;
+	for (i = 0; i < MAX_NB_COUNT; i ++) {
+		nb_addr = pConfig->Northbridges[i].NbPciAddress.AddressValue | NB_HTIU_INDEX;
+		LibNbPciIndexRMW(nb_addr,
+				NB_HTIU_REGA8,
+				AccessS3SaveWidth32,
+				~val,
+				val,
+				 &(pConfig->Northbridges[i]));
+	}
+}
+
+
+/*************************************************
+ * enable the dedicated function in s8226 board.
+ *************************************************/
+static void s8226_enable(device_t dev)
+{
+	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+}
+
+struct chip_operations mainboard_ops = {
+	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
+		.enable_dev = s8226_enable,
+};
diff --git a/src/mainboard/tyan/s8226/mptable.c b/src/mainboard/tyan/s8226/mptable.c
new file mode 100644
index 0000000..61a7bd4
--- /dev/null
+++ b/src/mainboard/tyan/s8226/mptable.c
@@ -0,0 +1,196 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+extern u8 bus_sr5650[14];
+extern u8 bus_sp5100[2];
+extern u32 bus_type[256];
+extern u32 sbdn_sr5650;
+extern u32 sbdn_sp5100;
+extern u8 bus_isa;
+
+
+static void *smp_write_config_table(void *v)
+{
+	struct mp_config_table *mc;
+	u32 apicid_sp5100;
+	u32 apicid_sr5650;
+	device_t dev;
+	u32 dword;
+
+	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+	mptable_init(mc, LOCAL_APIC_ADDR);
+
+	smp_write_processors(mc);
+	get_bus_conf();
+	mptable_write_buses(mc, NULL, &bus_isa);
+
+	/*
+	 * AGESA v5 Apply apic enumeration rules
+	 * For systems with >= 16 APICs, put the IO-APICs at 0..n and
+	 * put the local-APICs at m..z
+	 * For systems with < 16 APICs, put the Local-APICs at 0..n and
+	 * put the IO-APICs at (n + 1)..z
+	 */
+#if CONFIG_MAX_CPUS >= 16
+	apicid_sp5100 = 0x0;
+#else
+	apicid_sp5100 = CONFIG_MAX_CPUS + 1
+#endif
+	apicid_sr5650 = apicid_sp5100 + 1;
+
+	dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0));
+	if (dev) {
+		/* Set SP5100 IOAPIC ID */
+		dword = pci_read_config32(dev, 0x74) & 0xfffffff0;
+		smp_write_ioapic(mc, apicid_sp5100, 0x20, dword);
+
+#ifdef UNUSED_CODE
+		u8 byte;
+		/* Initialize interrupt mapping */
+		/* aza */
+		byte = pci_read_config8(dev, 0x63);
+		byte &= 0xf8;
+		byte |= 0; /* 0: INTA, ...., 7: INTH */
+		pci_write_config8(dev, 0x63, byte);
+		/* SATA */
+		dword = pci_read_config32(dev, 0xAC);
+		dword &= ~(7 << 26);
+		dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */
+		/* dword |= 1<<22; PIC and APIC co exists */
+		pci_write_config32(dev, 0xAC, dword);
+#endif
+
+		/*
+		 * 00:12.0: PROG SATA : INT F
+		 * 00:13.0: INTA USB_0
+		 * 00:13.1: INTB USB_1
+		 * 00:13.2: INTC USB_2
+		 * 00:13.3: INTD USB_3
+		 * 00:13.4: INTC USB_4
+		 * 00:13.5: INTD USB2
+		 * 00:14.1: INTA IDE
+		 * 00:14.2: Prog HDA : INT E
+		 * 00:14.5: INTB ACI
+		 * 00:14.6: INTB MCI
+		 */
+
+		/* Set RS5650 IOAPIC ID */
+		dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+		if (dev) {
+			pci_write_config32(dev, 0xF8, 0x1);
+			dword = pci_read_config32(dev, 0xFC) & 0xfffffff0;
+			smp_write_ioapic(mc, apicid_sr5650, 0x20, dword);
+		}
+
+	}
+
+	/* I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+	smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+	mptable_add_isa_interrupts(mc, bus_isa, apicid_sp5100, 0);
+
+	/* PCI interrupts are level triggered, and are
+	 * associated with a specific bus/device/function tuple.
+	 */
+#define PCI_INT(bus, dev, int_sign, pin) \
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_sp5100, (pin))
+
+	/* SMBUS */
+	//PCI_INT(0x0, 0x14, 0x0, 0x10); //not generate interrupt, 3Ch hardcoded to 0
+
+	/* HD Audio */
+	PCI_INT(0x0, 0x14, 0x2, 0x10);
+
+	/* USB */
+	/* OHCI0, OHCI1 hard-wired to 01h, corresponding to using INTA# */
+	/* EHCI hard-wired to 02h, corresponding to using INTB# */
+	/* USB1 */
+	PCI_INT(0x0, 0x12, 0x0, 0x10); /* OHCI0 Port 0~2 */
+	PCI_INT(0x0, 0x12, 0x1, 0x10); /* OHCI1 Port 3~5 */
+	PCI_INT(0x0, 0x12, 0x2, 0x11); /* EHCI Port 0~5 */
+
+	/* USB2 */
+	PCI_INT(0x0, 0x13, 0x0, 0x10); /* OHCI0 Port 6~8 */
+	PCI_INT(0x0, 0x13, 0x1, 0x10); /* OHCI1 Port 9~11 */
+	PCI_INT(0x0, 0x13, 0x2, 0x11); /* EHCI Port 6~11 */
+
+	/* USB3 EHCI hard-wired to 03h, corresponding to using INTC# */
+	PCI_INT(0x0, 0x14, 0x5, 0x12); /* OHCI0 Port 12~13 */
+
+	/* SATA */
+	PCI_INT(0x0, 0x11, 0x0, 0x16); //6, INTG
+
+	/* on board NIC & Slot PCIE.  */
+	/* configuration B doesnt need dev 5,6,7 */
+	/*
+	 * PCI_INT(bus_sr5650[0x5], 0x0, 0x0, 0x11);
+	 * PCI_INT(bus_sr5650[0x6], 0x0, 0x0, 0x12);
+	 * PCI_INT(bus_sr5650[0x7], 0x0, 0x0, 0x13);
+	 */
+
+	//smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0, (((13)<<2)|(0)), apicid_sr5650, 28); /* dev d */
+	//smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_sr5650[13], (((0)<<2)|(1)), apicid_sr5650, 0); /* card behind dev13 */
+
+	/* PCI slots */
+	/* PCI_SLOT 0. */
+	PCI_INT(bus_sp5100[1], 0x5, 0x0, 0x14);
+	PCI_INT(bus_sp5100[1], 0x5, 0x1, 0x15);
+	PCI_INT(bus_sp5100[1], 0x5, 0x2, 0x16);
+	PCI_INT(bus_sp5100[1], 0x5, 0x3, 0x17);
+
+	/* PCI_SLOT 1. */
+	PCI_INT(bus_sp5100[1], 0x6, 0x0, 0x15);
+	PCI_INT(bus_sp5100[1], 0x6, 0x1, 0x16);
+	PCI_INT(bus_sp5100[1], 0x6, 0x2, 0x17);
+	PCI_INT(bus_sp5100[1], 0x6, 0x3, 0x14);
+
+	/* PCI_SLOT 2. */
+	PCI_INT(bus_sp5100[1], 0x7, 0x0, 0x16);
+	PCI_INT(bus_sp5100[1], 0x7, 0x1, 0x17);
+	PCI_INT(bus_sp5100[1], 0x7, 0x2, 0x14);
+	PCI_INT(bus_sp5100[1], 0x7, 0x3, 0x15);
+
+
+	/*Local Ints:   Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+	IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0);
+	IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1);
+	/* There is no extension information... */
+
+	/* Compute the checksums */
+	return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr, 0);
+	return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/tyan/s8226/platform_cfg.h b/src/mainboard/tyan/s8226/platform_cfg.h
new file mode 100644
index 0000000..bbc4ad7
--- /dev/null
+++ b/src/mainboard/tyan/s8226/platform_cfg.h
@@ -0,0 +1,54 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef _PLATFORM_CFG_H_
+#define _PLATFORM_CFG_H_
+
+
+/* northbridge customize options */
+/**
+ * Max number of northbridges in the system
+ */
+#define MAX_NB_COUNT		1 //TODO: only 1 NB tested
+
+/**
+ *  Enable check for PCIe endpoint to be ready for PCI enumeration.
+ *
+ */
+//#define  EPREADY_WORKAROUND_DISABLED
+
+/**
+ *  Enable IOMMU support. Initialize IOMMU subsystem, generate IVRS ACPI table.
+ *
+ */
+#define  IOMMU_SUPPORT_DISABLE //TODO: enable it
+
+/**
+ *  Disable server PCIe hotplug support.
+ */
+
+//#define HOTPLUG_SUPPORT_DISABLED
+
+/**
+ *  Disable support for device number remapping for PCIe portsserver PCIe hotplug support.
+ */
+
+//#define DEVICE_REMAP_DISABLE
+
+#endif //_PLATFORM_CFG_H_
diff --git a/src/mainboard/tyan/s8226/platform_oem.c b/src/mainboard/tyan/s8226/platform_oem.c
new file mode 100644
index 0000000..883cad1
--- /dev/null
+++ b/src/mainboard/tyan/s8226/platform_oem.c
@@ -0,0 +1,50 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE
+
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  OemCustomizeInitEarly
+ *
+ *  Description:
+ *    This is the stub function will call the host environment through the binary block
+ *    interface (call-out port) to provide a user hook opportunity
+ *
+ *  Parameters:
+ *    @param[in]      **PeiServices
+ *    @param[in]      *InitEarly
+ *
+ *    @retval         VOID
+ *
+ **/
+/*---------------------------------------------------------------------------------------*/
+VOID OemCustomizeInitEarly(IN OUT AMD_EARLY_PARAMS *InitEarly);
+VOID OemCustomizeInitEarly(IN OUT AMD_EARLY_PARAMS *InitEarly)
+{
+	//InitEarly->PlatformConfig.CoreLevelingMode = CORE_LEVEL_TWO;
+}
+
diff --git a/src/mainboard/tyan/s8226/rd890_cfg.c b/src/mainboard/tyan/s8226/rd890_cfg.c
new file mode 100644
index 0000000..7a947b3
--- /dev/null
+++ b/src/mainboard/tyan/s8226/rd890_cfg.c
@@ -0,0 +1,274 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include "NbPlatform.h"
+#include "rd890_cfg.h"
+#include "northbridge/amd/cimx/rd890/chip.h"
+#include "nbInitializer.h"
+#include <string.h>
+#include <arch/ioapic.h>
+
+#ifndef __PRE_RAM__
+#include <device/device.h>
+extern void set_pcie_reset(void *config);
+extern void set_pcie_dereset(void *config);
+
+/**
+ * Platform dependent configuration at ramstage
+ */
+static void nb_platform_config(device_t nb_dev, AMD_NB_CONFIG *NbConfigPtr)
+{
+	u16 i;
+	PCIE_CONFIG *pPcieConfig = NbConfigPtr->pPcieConfig;
+	//AMD_NB_CONFIG_BLOCK *ConfigPtr = GET_BLOCK_CONFIG_PTR(NbConfigPtr);
+	struct northbridge_amd_cimx_rd890_config *rd890_info = NULL;
+	DEFAULT_PLATFORM_CONFIG(platform_config);
+
+	/* update the platform depentent configuration by devicetree */
+	rd890_info  = nb_dev->chip_info;
+	platform_config.PortEnableMap = rd890_info->port_enable;
+	if (rd890_info->gpp1_configuration == 0) {
+		platform_config.Gpp1Config = GFX_CONFIG_AAAA;
+	} else if (rd890_info->gpp1_configuration == 1) {
+		platform_config.Gpp1Config = GFX_CONFIG_AABB;
+	}
+	if (rd890_info->gpp2_configuration == 0) {
+		platform_config.Gpp2Config = GFX_CONFIG_AAAA;
+	} else if (rd890_info->gpp2_configuration == 1) {
+		platform_config.Gpp2Config = GFX_CONFIG_AABB;
+	}
+	platform_config.Gpp3aConfig = rd890_info->gpp3a_configuration;
+
+	if (platform_config.Gpp1Config != 0) {
+		pPcieConfig->CoreConfiguration[0] = platform_config.Gpp1Config;
+	}
+	if (platform_config.Gpp2Config != 0) {
+		pPcieConfig->CoreConfiguration[1] = platform_config.Gpp2Config;
+	}
+	if (platform_config.Gpp3aConfig != 0) {
+		pPcieConfig->CoreConfiguration[2] = platform_config.Gpp3aConfig;
+	}
+
+	pPcieConfig->TempMmioBaseAddress = (UINT16)(platform_config.TemporaryMmio >> 20);
+	for (i = 0; i <= MAX_CORE_ID; i++) {
+		NbConfigPtr->pPcieConfig->CoreSetting[i].SkipConfiguration = OFF;
+		NbConfigPtr->pPcieConfig->CoreSetting[i].PerformanceMode = OFF;
+	}
+	for (i = MIN_PORT_ID; i <= MAX_PORT_ID; i++) {
+		NbConfigPtr->pPcieConfig->PortConfiguration[i].PortLinkMode = PcieLinkModeGen2;
+	}
+
+	for (i = MIN_PORT_ID; i <= MAX_PORT_ID; i++) {
+		if ((platform_config.PortEnableMap & (1 << i)) != 0) {
+			pPcieConfig->PortConfiguration[i].PortPresent = ON;
+			if ((platform_config.PortGen1Map & (1 << i)) != 0) {
+				pPcieConfig->PortConfiguration[i].PortLinkMode = PcieLinkModeGen1;
+			}
+			if ((platform_config.PortHotplugMap & (1 << i)) != 0) {
+				u16 j;
+				pPcieConfig->PortConfiguration[j].PortHotplug = ON; /* Enable Hotplug */
+				/* Set Hotplug descriptor info */
+				for (j = 0; j < 8; j++) {
+					u32 PortDescriptor;
+					PortDescriptor = platform_config.PortHotplugDescriptors[j];
+					if ((PortDescriptor & 0xF) == j) {
+						pPcieConfig->ExtPortConfiguration[j].PortHotplugDevMap  = (PortDescriptor >> 4)  & 3;
+						pPcieConfig->ExtPortConfiguration[j].PortHotplugByteMap = (PortDescriptor >> 6)  & 1;
+						break;
+					}
+				}
+			}
+		}
+	}
+}
+#endif // __PRE_RAM__
+
+/**
+ * @brief Entry point of Northbridge CIMx callout/CallBack
+ *
+ * prototype AGESA_STATUS (*CALLOUT_ENTRY) (UINT32 Param1, UINTN Param2, VOID* ConfigPtr);
+ *
+ * @param[in] u32 func               Northbridge CIMx CallBackId
+ * @param[in] u32 data               Northbridge Input Data.
+ * @param[in] AMD_NB_CONFIG *config  Northbridge configuration structure pointer.
+ *
+ */
+static u32 rd890_callout_entry(u32 func, u32 data, void *config)
+{
+	u32 ret = 0;
+#ifndef __PRE_RAM__
+	device_t nb_dev = (device_t)data;
+#endif
+	AMD_NB_CONFIG *nbConfigPtr = (AMD_NB_CONFIG*)config;
+
+	switch (func) {
+		case PHCB_AmdPortTrainingCompleted:
+			break;
+
+		case PHCB_AmdPortResetDeassert:
+#ifndef __PRE_RAM__
+			set_pcie_dereset(config);
+#endif
+			break;
+
+		case PHCB_AmdPortResetAssert:
+#ifndef __PRE_RAM__
+			set_pcie_reset(config);
+#endif
+			break;
+
+		case PHCB_AmdPortResetSupported:
+			break;
+		case PHCB_AmdGeneratePciReset:
+			break;
+		case PHCB_AmdGetExclusionTable:
+			break;
+		case PHCB_AmdAllocateBuffer:
+			break;
+		case PHCB_AmdUpdateApicInterruptMapping:
+			break;
+		case PHCB_AmdFreeBuffer:
+			break;
+		case PHCB_AmdLocateBuffer:
+			break;
+		case PHCB_AmdReportEvent:
+			break;
+		case PHCB_AmdPcieAsmpInfo:
+			break;
+
+		case CB_AmdSetNbPorConfig:
+			break;
+		case CB_AmdSetHtConfig:
+			/*TODO: different HT path and deempasis for each NB */
+			nbConfigPtr->pHtConfig->NbTransmitterDeemphasis = DEFAULT_HT_DEEMPASIES;
+
+			break;
+		case CB_AmdSetPcieEarlyConfig:
+#ifndef __PRE_RAM__
+			nb_platform_config(nb_dev, nbConfigPtr);
+#endif
+			break;
+
+		case CB_AmdSetEarlyPostConfig:
+			break;
+
+		case CB_AmdSetMidPostConfig:
+			nbConfigPtr->pNbConfig->IoApicBaseAddress = IO_APIC_ADDR;
+#ifndef IOMMU_SUPPORT_DISABLE //TODO enable iommu
+			/* SBIOS must alloc 16K memory for IOMMU MMIO */
+			UINT32  MmcfgBarAddress; //using default IOmmuBaseAddress
+			LibNbPciRead(nbConfigPtr->NbPciAddress.AddressValue | 0x1C,
+					AccessWidth32,
+					&MmcfgBarAddress,
+					nbConfigPtr);
+			MmcfgBarAddress &= ~0xf;
+			if (MmcfgBarAddress != 0) {
+				nbConfigPtr->IommuBaseAddress = MmcfgBarAddress;
+			}
+			nbConfigPtr->IommuBaseAddress = 0; //disable iommu
+#endif
+			break;
+
+		case CB_AmdSetLatePostConfig:
+			break;
+
+		case CB_AmdSetRecoveryConfig:
+			break;
+	}
+
+	return ret;
+}
+
+
+/**
+ * @brief North Bridge CIMx configuration
+ *
+ * should be called before exeucte CIMx function.
+ * this function will be called in romstage and ramstage.
+ */
+void rd890_cimx_config(AMD_NB_CONFIG_BLOCK *pConfig, NB_CONFIG *nbConfig, HT_CONFIG *htConfig, PCIE_CONFIG *pcieConfig)
+{
+	u16 i = 0;
+	PCI_ADDR PciAddress;
+	u32 val, sbNode, sbLink;
+
+	if (!pConfig) {
+		return;
+	}
+
+	memset(pConfig, 0, sizeof(AMD_NB_CONFIG_BLOCK));
+	for (i = 0; i < MAX_NB_COUNT; i++) {
+		pConfig->Northbridges[i].pNbConfig	= &nbConfig[i];
+		pConfig->Northbridges[i].pHtConfig	= &htConfig[i];
+		pConfig->Northbridges[i].pPcieConfig	= &pcieConfig[i];
+		pConfig->Northbridges[i].ConfigPtr	= &pConfig;
+	}
+
+	/* Initialize all NB structures */
+	AmdInitializer(pConfig);
+
+	pConfig->NumberOfNorthbridges = MAX_NB_COUNT - 1; /* Support limited to primary NB only located at 0:0:0 */
+	//pConfig->StandardHeader.ImageBasePtr = CIMX_B2_IMAGE_BASE_ADDRESS;
+	pConfig->StandardHeader.PcieBasePtr = (VOID *)PCIEX_BASE_ADDRESS;
+	pConfig->StandardHeader.CalloutPtr = &rd890_callout_entry;
+
+	/*
+	 * PCI Address to Access NB. Depends on HT topology and configuration for multi NB platform.
+	 * Always 0:0:0 on single NB platform.
+	 */
+	pConfig->Northbridges[0].NbPciAddress.AddressValue = MAKE_SBDFO(0, 0x0, 0x0, 0x0, 0x0);
+
+	/* Set HT path to NB by SbNode and SbLink */
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x60);
+	LibNbPciRead(PciAddress.AddressValue, AccessWidth32, &val, &(pConfig->Northbridges[0]));
+	sbNode = (val >> 8) & 0x07;
+	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x64);
+	LibNbPciRead(PciAddress.AddressValue, AccessWidth32, &val, &(pConfig->Northbridges[0]));
+	sbLink = (val >> 8) & 0x07; //assum ganged
+	pConfig->Northbridges[0].NbHtPath.NodeID = sbNode;
+	pConfig->Northbridges[0].NbHtPath.LinkID = sbLink;
+	//TODO: other NBs
+
+#ifndef __PRE_RAM__
+	/* If temporrary MMIO enable set up CPU MMIO */
+	for (i = 0; i <= pConfig->NumberOfNorthbridges; i++) {
+		UINT32  MmioBase;
+		UINT32  LinkId;
+		UINT32  SubLinkId;
+		MmioBase = pConfig->Northbridges[i].pPcieConfig->TempMmioBaseAddress;
+		if (MmioBase != 0) {
+			LinkId = pConfig->Northbridges[i].NbHtPath.LinkID & 0xf;
+			SubLinkId = ((pConfig->Northbridges[i].NbHtPath.LinkID & 0xF0) == 0x20) ? 1 : 0;
+			/* Set Limit */
+			LibNbPciRMW(MAKE_SBDFO (0, 0, 0x18, 0x1, (i * 4) + 0x84),
+					AccessWidth32,
+					0x0,
+					((MmioBase << 12) + 0xF00) | (LinkId << 4) | (SubLinkId << 6),
+					&(pConfig->Northbridges[i]));
+			/* Set Base */
+			LibNbPciRMW(MAKE_SBDFO (0, 0, 0x18, 0x1, (i * 4) + 0x80),
+					AccessWidth32,
+					0x0,
+					(MmioBase << 12) | 0x3,
+					&(pConfig->Northbridges[i]));
+		}
+	}
+#endif
+}
+
diff --git a/src/mainboard/tyan/s8226/rd890_cfg.h b/src/mainboard/tyan/s8226/rd890_cfg.h
new file mode 100644
index 0000000..8f45019
--- /dev/null
+++ b/src/mainboard/tyan/s8226/rd890_cfg.h
@@ -0,0 +1,174 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef  _RD890_CFG_H_
+#define _RD890_CFG_H_
+
+#include "NbPlatform.h"
+
+/* platform dependent configuration default value */
+
+/**
+ * Path from CPU to NB
+ * [0..7]   - Node  (0..8)
+ * [8..11]  - Link  (0..3)
+ * [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0.
+ */
+#ifndef DEFAULT_HT_PATH
+#if CONFIG_CPU_AMD_AGESA_FAMILY10 == 1
+#define DEFAULT_HT_PATH		{0x0, 0x3}
+#endif
+#if CONFIG_CPU_AMD_AGESA_FAMILY15 == 1
+#define DEFAULT_HT_PATH		{0x0, 0x1}
+#endif
+#endif
+
+/**
+ * Bitmap of enabled ports on NB #0/1/2/3
+ * Bit[0] - Reserved
+ * Bit[1] - Reserved
+ * Bit[2] - Enable PCIe port 2
+ * Bit[3] - Enable PCIe port 3
+ * Bit[4] - Enable PCIe port 4
+ * Bit[5] - Enable PCIe port 5
+ * Bit[6] - Enable PCIe port 2
+ * Bit[7] - Enable PCIe port 7
+ * Bit[8] - Reserved
+ * Bit[9] - Enable PCIe port 9
+ * Bit[10]- Enable PCIe port 10
+ * Bit[11]- Enable PCIe port 11
+ * Bit[12]- Enable PCIe port 12
+ * Bit[13]- Enable PCIe port 13
+ * Example:
+ *  port_enable = 0x14
+ *  Port 2 and 4 enabled for training/initialization
+ */
+#ifndef DEFAULT_PORT_ENABLE_MAP
+#define DEFAULT_PORT_ENABLE_MAP		0x0014
+#endif
+
+/**
+ * Bitmap of ports that have slot or onboard device connected.
+ * Example force PCIe Gen1 supporton port 2 and 4  (DEFAULT_PORT_ENABLE_MAP = BIT2 | BIT4)
+ * #define DEFAULT_PORT_FORCE_GEN1        0x604
+ */
+#ifndef DEFAULT_PORT_FORCE_GEN1
+#define DEFAULT_PORT_FORCE_GEN1		0x0
+#endif
+
+/**
+ * Bitmap of ports that have server hotplug support
+ */
+#ifndef DEFAULT_HOTPLUG_SUPPORT
+#define DEFAULT_HOTPLUG_SUPPORT		0x0
+#endif
+
+#ifndef DEFAULT_HOTPLUG_DESCRIPTOR
+#define DEFAULT_HOTPLUG_DESCRIPTOR		{0, 0, 0, 0, 0, 0, 0, 0}
+#endif
+
+#ifndef DEFAULT_TEMPMMIO_BASE_ADDRESS
+#define DEFAULT_TEMPMMIO_BASE_ADDRESS		0xD0000000
+#endif
+
+/**
+ * Default GPP1 core configuraton on NB #0/1/2/3.
+ *  2  x8 slot, GFX_CONFIG_AABB
+ *  1 x16 slot, GFX_CONFIG_AAAA
+ */
+#ifndef DEFAULT_GPP1_CONFIG
+#define DEFAULT_GPP1_CONFIG		GFX_CONFIG_AABB
+#endif
+
+/**
+ * Default GPP2 core configuraton on NB #0/1/2/3.
+ *  2  x8 slot, GFX_CONFIG_AABB
+ *  1 x16 slot, GFX_CONFIG_AAAA
+ */
+#ifndef DEFAULT_GPP2_CONFIG
+#define DEFAULT_GPP2_CONFIG		GFX_CONFIG_AABB
+#endif
+
+/**
+ * Default GPP3a core configuraton on NB #0/1/2/3.
+ * 4:2:0:0:0:0   - GPP_CONFIG_GPP420000, 0x1
+ * 4:1:1:0:0:0   - GPP_CONFIG_GPP411000, 0x2
+ * 2:2:2:0:0:0   - GPP_CONFIG_GPP222000, 0x3
+ * 2:2:1:1:0:0   - GPP_CONFIG_GPP221100, 0x4
+ * 2:1:1:1:1:0   - GPP_CONFIG_GPP211110, 0x5
+ * 1:1:1:1:1:1   - GPP_CONFIG_GPP111111, 0x6
+ */
+#ifndef DEFAULT_GPP3A_CONFIG
+#define DEFAULT_GPP3A_CONFIG		GPP_CONFIG_GPP111111
+#endif
+
+
+/**
+ * Default HT Transmitter de-emphasis setting
+ */
+#ifndef DEFAULT_HT_DEEMPASIES
+#define DEFAULT_HT_DEEMPASIES		0x3
+#endif
+
+/**
+ * Default APIC nterrupt base for IOAPIC
+ */
+#ifndef DEFAULT_APIC_INTERRUPT_BASE
+#define DEFAULT_APIC_INTERRUPT_BASE	24
+#endif
+
+
+#define DEFAULT_PLATFORM_CONFIG(name) \
+	NB_PLATFORM_CONFIG name = { \
+		DEFAULT_PORT_ENABLE_MAP, \
+		DEFAULT_PORT_FORCE_GEN1, \
+		DEFAULT_HOTPLUG_SUPPORT, \
+		DEFAULT_HOTPLUG_DESCRIPTOR, \
+		DEFAULT_TEMPMMIO_BASE_ADDRESS, \
+		DEFAULT_GPP1_CONFIG, \
+		DEFAULT_GPP2_CONFIG, \
+		DEFAULT_GPP3A_CONFIG, \
+		DEFAULT_HT_DEEMPASIES, \
+		/*DEFAULT_HT_PATH,*/ \
+		DEFAULT_APIC_INTERRUPT_BASE, \
+	}
+
+/**
+ * Platform configuration
+ */
+typedef struct {
+	UINT16  PortEnableMap;            ///< Bitmap of enabled ports
+	UINT16  PortGen1Map;              ///< Bitmap of ports to disable Gen2
+	UINT16  PortHotplugMap;           ///< Bitmap of ports support hotplug
+	UINT8   PortHotplugDescriptors[8];///< Ports Hotplug descriptors
+	UINT32  TemporaryMmio;            ///< Temporary MMIO
+	UINT32  Gpp1Config;               ///< Default PCIe GFX core configuration
+	UINT32  Gpp2Config;               ///< Default PCIe GPP2 core configuration
+	UINT32  Gpp3aConfig;              ///< Default PCIe GPP3a core configuration
+	UINT8   NbTransmitterDeemphasis;  ///< HT transmitter de-emphasis level
+	//	HT_PATH NbHtPath;                 ///< HT path to NB
+	UINT8   GlobalApicInterruptBase;  ///< Global APIC interrupt base that is used in MADT table for IO APIC.
+} NB_PLATFORM_CONFIG;
+
+/**
+ * Bridge CIMx configuration
+ */
+void rd890_cimx_config(AMD_NB_CONFIG_BLOCK *pConfig, NB_CONFIG *nbConfig, HT_CONFIG *htConfig, PCIE_CONFIG *pcieConfig);
+
+#endif //_RD890_CFG_H_
diff --git a/src/mainboard/tyan/s8226/reset.c b/src/mainboard/tyan/s8226/reset.c
new file mode 100644
index 0000000..68a39f2
--- /dev/null
+++ b/src/mainboard/tyan/s8226/reset.c
@@ -0,0 +1,66 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <reset.h>
+#include <arch/io.h>		/*inb, outb*/
+#include <arch/romcc_io.h>	/*pci_read_config32, device_t, PCI_DEV*/
+
+#define HT_INIT_CONTROL		0x6C
+#define HTIC_BIOSR_Detect	(1<<5)
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 32
+#define NODE_PCI(x, fn)	((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
+#else
+#define NODE_PCI(x, fn)	PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
+#endif
+
+static inline void set_bios_reset(void)
+{
+	u32 nodes;
+	u32 htic;
+	device_t dev;
+	int i;
+
+	nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
+	for(i = 0; i < nodes; i++) {
+		dev = NODE_PCI(i, 0);
+		htic = pci_read_config32(dev, HT_INIT_CONTROL);
+		htic &= ~HTIC_BIOSR_Detect;
+		pci_write_config32(dev, HT_INIT_CONTROL, htic);
+	}
+}
+
+void hard_reset(void)
+{
+	set_bios_reset();
+	/* Try rebooting through port 0xcf9 */
+	/* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
+	outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
+	outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
+}
+
+//SbReset();
+void soft_reset(void)
+{
+	set_bios_reset();
+	/* link reset */
+	outb(0x06, 0x0cf9);
+}
+
diff --git a/src/mainboard/tyan/s8226/romstage.c b/src/mainboard/tyan/s8226/romstage.c
new file mode 100644
index 0000000..9ebafc7
--- /dev/null
+++ b/src/mainboard/tyan/s8226/romstage.c
@@ -0,0 +1,148 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <lib.h>
+#include <reset.h>
+#include <stdint.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <arch/cpu.h>
+#include <console/console.h>
+#include <arch/stages.h>
+#include "cpu/x86/bist.h"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "agesawrapper.h"
+#include "northbridge/amd/agesa/family10/reset_test.h"
+#include <nb_cimx.h>
+#include <sb_cimx.h>
+#include "superio/nuvoton/wpcm450/wpcm450.h"
+#include "superio/winbond/w83627dhg/w83627dhg.h"
+#include "src/drivers/pc80/i8254.c"
+#include "src/drivers/pc80/i8259.c"
+#include <cpu/x86/cache.h>
+
+extern void disable_cache_as_ram(void); /* cache_as_ram.inc */
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
+#define DUMMY_DEV PNP_DEV(0x2e, 0)
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	u32 val;
+
+	post_code(0x30);
+	agesawrapper_amdinitmmio();
+	post_code(0x31);
+
+	/* Halt if there was a built in self test failure */
+	post_code(0x33);
+	report_bist_failure(bist);
+
+	sb7xx_51xx_enable_wideio(0, 0x1600); /* though UARTs are on the NUVOTON BMC */
+ 	w83627dhg_set_clksel_48(DUMMY_DEV);
+ 	w83627dhg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+	sb7xx_51xx_disable_wideio(0);
+	post_code(0x34);
+
+	uart_init();
+	post_code(0x35);
+	console_init();
+
+	val = cpuid_eax(1);
+	printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+	post_code(0x37);
+	val = agesawrapper_amdinitreset();
+	if (val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val);
+	} else {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitreset passed\n");
+	}
+
+	if (!cpu_init_detectedx && boot_cpu()) {
+		post_code(0x38);
+		/*
+		 * SR5650/5670/5690 RD890 chipset, read pci config space hang at POR,
+		 * Disable all Pcie Bridges to work around It.
+		 */
+		sr56x0_rd890_disable_pcie_bridge();
+		post_code(0x39);
+		nb_Poweron_Init();
+		post_code(0x3A);
+		sb_Poweron_Init();
+	}
+	post_code(0x3B);
+	val = agesawrapper_amdinitearly();
+	if(val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val);
+	} else {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitearly passed\n");
+	}
+
+	post_code(0x3C);
+	/* W83627DHG pin89,90 function select is RSTOUT3#, RSTOUT2# by default.
+	 * In order to access W83795G/ADG HWM using I2C protocol,
+	 * we select function to SDA, SCL function (or GP33, GP32 function).
+	 */
+	w83627dhg_enable_i2c(PNP_DEV(0x2E, W83627DHG_SPI));
+
+	nb_Ht_Init();
+	post_code(0x3D);
+	/* Reset for HT, FIDVID, PLL and ucode patch(errata) changes to take affect. */
+	if (!warm_reset_detect(0)) {
+		print_info("...WARM RESET...\n\n\n");
+		distinguish_cpu_resets(0);
+		soft_reset();
+		die("After soft_reset_x - shouldn't see this message!!!\n");
+	}
+
+	post_code(0x40);
+	val = agesawrapper_amdinitpost();
+	if (val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val);
+	} else {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitpost passed\n");
+	}
+
+	post_code(0x41);
+	val = agesawrapper_amdinitenv();
+	if(val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val);
+	}
+	printk(BIOS_DEBUG, "agesawrapper_amdinitenv passed\n");
+
+	post_code(0x42);
+
+	post_code(0x50);
+	print_debug("Disabling cache as ram ");
+	disable_cache_as_ram();
+	enable_cache();
+	print_debug("done\n");
+
+	post_code(0x51);
+	setup_i8259 ();
+	setup_i8254 ();
+	copy_and_run(0);
+
+	/* We will not return,  Should never see this message and post code. */
+	print_debug("should not be here -\n");
+	post_code(0x54);
+}
+
diff --git a/src/mainboard/tyan/s8226/sb700_cfg.c b/src/mainboard/tyan/s8226/sb700_cfg.c
new file mode 100644
index 0000000..4cbb8ca
--- /dev/null
+++ b/src/mainboard/tyan/s8226/sb700_cfg.c
@@ -0,0 +1,142 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <string.h>
+#include <console/console.h>    /* printk */
+#include "Platform.h"
+#include "sb700_cfg.h"
+
+
+/**
+ * @brief South Bridge CIMx configuration
+ *
+ * should be called before exeucte CIMx function.
+ * this function will be called in romstage and ramstage.
+ */
+void sb700_cimx_config(AMDSBCFG *sb_config)
+{
+	if (!sb_config) {
+		printk(BIOS_DEBUG, "SB700 - Cfg.c - sb700_cimx_config - No sb_config.\n");
+		return;
+	}
+	printk(BIOS_DEBUG, "SB700 - Cfg.c - sb700_cimx_config - Start.\n");
+	memset(sb_config, 0, sizeof(AMDSBCFG));
+
+	/* SB_POWERON_INIT */
+	sb_config->StdHeader.Func = SB_POWERON_INIT;
+
+	/* header */
+	sb_config->StdHeader.pPcieBase = PCIEX_BASE_ADDRESS;
+
+	/* static Build Parameters */
+	sb_config->BuildParameters.BiosSize = BIOS_SIZE;
+	sb_config->BuildParameters.LegacyFree = LEGACY_FREE;
+	sb_config->BuildParameters.EcKbd = 0;
+	sb_config->BuildParameters.EcChannel0 = 0;
+	sb_config->BuildParameters.Smbus0BaseAddress = SMBUS0_BASE_ADDRESS;
+	sb_config->BuildParameters.Smbus1BaseAddress = SMBUS1_BASE_ADDRESS;
+	sb_config->BuildParameters.SioPmeBaseAddress = SIO_PME_BASE_ADDRESS;
+	sb_config->BuildParameters.WatchDogTimerBase = WATCHDOG_TIMER_BASE_ADDRESS;
+	sb_config->BuildParameters.SpiRomBaseAddress = SPI_BASE_ADDRESS;
+
+	sb_config->BuildParameters.AcpiPm1EvtBlkAddr = PM1_EVT_BLK_ADDRESS;
+	sb_config->BuildParameters.AcpiPm1CntBlkAddr = PM1_CNT_BLK_ADDRESS;
+	sb_config->BuildParameters.AcpiPmTmrBlkAddr = PM1_TMR_BLK_ADDRESS;
+	sb_config->BuildParameters.CpuControlBlkAddr = CPU_CNT_BLK_ADDRESS;
+	sb_config->BuildParameters.AcpiGpe0BlkAddr = GPE0_BLK_ADDRESS;
+	sb_config->BuildParameters.SmiCmdPortAddr =