[coreboot] New patch to review for coreboot: 33723e7 Persimmon: adapt PCIe reset code copied from Inagua to actually match Persimmon
Jens Rottmann (JRottmann@LiPPERTembedded.de)
gerrit at coreboot.org
Mon Feb 18 20:08:45 CET 2013
Jens Rottmann (JRottmann at LiPPERTembedded.de) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2446
-gerrit
commit 33723e752be6e890e3edeb8c24f7d4d251ae90a1
Author: Jens Rottmann <JRottmann at LiPPERTembedded.de>
Date: Mon Feb 18 19:40:33 2013 +0100
Persimmon: adapt PCIe reset code copied from Inagua to actually match Persimmon
Comparing Persimmon and Inagua schematics and Coreboot code show the PCIe reset
code has been blindly copied even though it doesn't suit the Persimmon at all.
The Inagua can employ GPIOs 21, 25, 02 to manually reset devices on APU PCIe
lanes 0/1, 2, 3 respectively. (Appearently the motivation for this is to revive
buggy PCIe gen1 devices which got confused by PCIe gen2 signal training.)
However the Persimmon not only doesn't support this, it even needs these 3 pins
for the PCI interface! Instead it uses GPIO50 to reset devices on lanes 0-2 all
at once. Lane 3 is unconnected anyway.
This patch adapts the Persimmon mainboard code according to the DB-FT1 rev. D
schematics.
Change-Id: I05a657d9bf8cc59acc4f5174eb20375165c860c7
Signed-off-by: Jens Rottmann <JRottmann at LiPPERTembedded.de>
---
src/mainboard/amd/persimmon/BiosCallOuts.c | 42 ++++-----------------------
src/mainboard/amd/persimmon/BiosCallOuts.h | 11 ++-----
src/mainboard/amd/persimmon/PlatformGnbPcie.c | 10 +++----
3 files changed, 12 insertions(+), 51 deletions(-)
diff --git a/src/mainboard/amd/persimmon/BiosCallOuts.c b/src/mainboard/amd/persimmon/BiosCallOuts.c
index 52eb9dd..0711d96 100644
--- a/src/mainboard/amd/persimmon/BiosCallOuts.c
+++ b/src/mainboard/amd/persimmon/BiosCallOuts.c
@@ -562,50 +562,18 @@ AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
switch (ResetInfo->ResetId)
{
- case 4:
+ case 46: // GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot
switch (ResetInfo->ResetControl) {
case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
Data8 &= ~(UINT8)BIT6 ;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG50, Data8);
Status = AGESA_SUCCESS;
break;
case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
Data8 |= BIT6 ;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 6:
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 &= ~(UINT8)BIT6 ;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 |= BIT6 ;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 7:
- switch (ResetInfo->ResetControl) {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
- Data8 &= ~(UINT8)BIT6 ;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 |= BIT6 ;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
+ Write64Mem8 (GpioMmioAddr+SB_GPIO_REG50, Data8);
Status = AGESA_SUCCESS;
break;
}
diff --git a/src/mainboard/amd/persimmon/BiosCallOuts.h b/src/mainboard/amd/persimmon/BiosCallOuts.h
index cd23110..09dc436 100644
--- a/src/mainboard/amd/persimmon/BiosCallOuts.h
+++ b/src/mainboard/amd/persimmon/BiosCallOuts.h
@@ -69,12 +69,7 @@ AGESA_STATUS BiosHookBeforeDramInitRecovery (UINT32 Func, UINT32 Data, VOID *Con
AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
/* PCIE slot reset control */
AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
-#define SB_GPIO_REG02 2
-#define SB_GPIO_REG09 9
-#define SB_GPIO_REG10 10
-#define SB_GPIO_REG15 15
-#define SB_GPIO_REG17 17
-#define SB_GPIO_REG21 21
-#define SB_GPIO_REG25 25
-#define SB_GPIO_REG28 28
+
+#define SB_GPIO_REG50 50
+
#endif //_BIOS_CALLOUT_H_
diff --git a/src/mainboard/amd/persimmon/PlatformGnbPcie.c b/src/mainboard/amd/persimmon/PlatformGnbPcie.c
index a5b075e..f75d258 100644
--- a/src/mainboard/amd/persimmon/PlatformGnbPcie.c
+++ b/src/mainboard/amd/persimmon/PlatformGnbPcie.c
@@ -60,28 +60,26 @@ PCIe_PORT_DESCRIPTOR PortList [] = {
{
0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 4)
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 46)
},
- #if 1
// Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...)
{
0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 5)
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 46)
},
// Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...)
{
0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 6)
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 46)
},
// Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...)
{
0,
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 7)
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 0)
},
- #endif
// Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...)
{
DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
More information about the coreboot
mailing list