[coreboot] Patch set updated for coreboot: 8a796b4 Hudson: Legacy free question is hudson only

[Martin Roth (martin.roth@se-eng.com)]

Martin Roth (martin.roth at se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2179

-gerrit

commit 8a796b494c49ebc167eba901102e8534ab87ea74
Author: Martin Roth <martin.roth at se-eng.com>
Date:   Mon Jan 21 19:33:22 2013 -0700

    Hudson: Legacy free question is hudson only
    
    The "system is legacy free" question accidentally escaped
    from the hudson Kconfig where it was intended to stay and
    went coreboot-wide.  This puts it back inside the boundries
    of the hudson southbridge where it belongs.
    
    I also commented the endif statements to make it easier to
    tell where things belong.
    
    Change-Id: I49f7a5eadb96d40c6101a93bc390e644617a5654
    Signed-off-by: Martin Roth <martin.roth at se-eng.com>
---
 src/southbridge/amd/agesa/hudson/Kconfig | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/src/southbridge/amd/agesa/hudson/Kconfig b/src/southbridge/amd/agesa/hudson/Kconfig
index 3a97e60..92e5960 100644
--- a/src/southbridge/amd/agesa/hudson/Kconfig
+++ b/src/southbridge/amd/agesa/hudson/Kconfig
@@ -105,7 +105,7 @@ config HUDSON_FWM_POSITION
 	  0xFFC20000 if flash chip size is 4M
 	  0xFF820000 if flash chip size is 8M
 	  0xFF020000 if flash chip size is 16M
-endif
+endif # HUDSON_FWM
 
 choice
 	prompt "SATA Mode"
@@ -175,7 +175,7 @@ config AHCI_ROM_FILE
 	string "AHCI ROM path and filename"
 	depends on HUDSON_AHCI_ROM
 	default "src/southbridge/amd/agesa/hudson/ahci.bin"
-endif
+endif # HUDSON_SATA_AHCI || HUDSON_SATA_AHCI7804
 
 if HUDSON_SATA_RAID
 config RAID_ROM_ID
@@ -202,7 +202,7 @@ config RAID_MISC_ROM_POSITION
 	  The RAID ROM requires that the MISC ROM is located between the range
 	  0xFFF0_0000 to 0xFFF0_FFFF. Also, it must 1K bytes aligned.
 	  The CONFIG_ROM_SIZE must larger than 0x100000.
-endif
+endif # HUDSON_SATA_RAID
 
 config S3_VOLATILE_POS
 	hex "S3 volatile storage position"
@@ -212,10 +212,10 @@ config S3_VOLATILE_POS
 	  For a system with S3 feature, the BIOS needs to save some data to
 	  non-volitile storage at cold boot stage.
 
-endif
-
 config HUDSON_LEGACY_FREE
 	bool "System is legacy free"
 	help
 	  Select y if there is no keyboard controller in the system.
 	  This sets variables in AGESA and ACPI.
+
+endif # SOUTHBRIDGE_AMD_AGESA_HUDSON