[coreboot] Tyan S2895 SATA, USB, ethernet not working

Andrew Basterfield abasterfield at gmail.com
Sat Mar 2 23:27:41 CET 2013


On 02/03/13 17:54, Andrew Basterfield wrote:
> Hi
>
> I have put coreboot+seabios on an old Tyan S2895 I have just retired
> when the 2nd CPU socket stopped working probably because some of the
> caps are bulging... it is stable anyways on 1 CPU with Tyan BIOS.
>
> Booting into Linux 3.2 amd64 on SATA - grub works fine and the drives
> are detected by the kernel but then I get lots of SATA errors, the USB
> root hubs are detected but no devices, I get no onboard ethernet...
>
> One potential issue is when I booted the board under systemrescuecd
> flashrom can no longer see the chip... I shelled out $10 for a new chip
> but that may take a couple of weeks to wing it's way here from the USA.
>
> I should put some new caps in but there is a chance I will brick the
> board very permanently doing that so if there is anything I can do to
> help fixup the S2985 port beforehand let me know, as maybe the board
> will end up in the trash if I can't use it for anything interesting.
>
> Maybe I can hotswap and reflash the chip in another Tyan Opteron board
> of a similar vintage (I have a couple); is there a point in time where I
> can roll back to and have a better chance of building a coreboot that
> works better?
>
> thanks
>
> Andrew

I have been able to flash it back using the Tyan tool under FreeDOS, 
this is what the dmesg looks like with the Tyan BIOS

Andrew

-------------- next part --------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel at lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=36866c4a-08a5-4a58-8ba5-a26165406526 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[    0.000000]  BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000c8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
[    0.000000]  BIOS-e820: 000000007ff80000 - 000000007ff91000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ff91000 - 0000000080000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000080000000 - 00000000cff80000 (usable)
[    0.000000]  BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: TYAN Computer Corp. S2895/S2895, BIOS 2004Q3 11/18/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF00000000 write-back
[    0.000000]   1 base 0100000000 mask FFE0000000 write-back
[    0.000000]   2 base 0120000000 mask FFF0000000 write-back
[    0.000000]   3 base 00D0000000 mask FFF0000000 uncachable
[    0.000000]   4 base 00E0000000 mask FFE0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f7830] f7830
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000cff80000
[    0.000000]  0000000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cff80000 page 4k
[    0.000000] kernel direct mapping tables up to cff80000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[    0.000000]  0100000000 - 0130000000 page 2M
[    0.000000] kernel direct mapping tables up to 130000000 @ cff7e000-cff80000
[    0.000000] RAMDISK: 36b82000 - 375b9000
[    0.000000] ACPI: RSDP 00000000000f78c0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 000000007ff8b4a0 0003C (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 000000007ff90d9a 00074 (v01 NVIDIA CK8S     06040000 PTL_ 000F4240)
[    0.000000] ACPI: DSDT 000000007ff8b4dc 058BE (v01 NVIDIA      CK8 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 000000007ff91fc0 00040
[    0.000000] ACPI: SRAT 000000007ff90e0e 000C8 (v01 AMD    HAMMER   06040000 AMD  00000001)
[    0.000000] ACPI: SPCR 000000007ff90ed6 00050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
[    0.000000] ACPI: MCFG 000000007ff90f26 0003C (v01 PTLTD    MCFG   06040000      00000000)
[    0.000000] ACPI: APIC 000000007ff90f62 00076 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 000000007ff90fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[    0.000000] SRAT: Node 0 PXM 0 100000000-130000000
[    0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
[    0.000000] NUMA: Node 0 [0,d0000000) + [100000000,130000000) -> [0,130000000)
[    0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[    0.000000]   NODE_DATA [000000012fffb000 - 000000012fffffff]
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00130000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009b
[    0.000000]     0: 0x00000100 -> 0x0007ff80
[    0.000000]     0: 0x00080000 -> 0x000cff80
[    0.000000]     0: 0x00100000 -> 0x00130000
[    0.000000] On node 0 totalpages: 1048203
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3918 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833336 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xdc000000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xdc000000, GSI 24-27
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xdc001000] gsi_base[28])
[    0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xdc001000, GSI 28-31
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 48
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000c8000
[    0.000000] PM: Registered nosave memory: 00000000000c8000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 000000007ff80000 - 000000007ff91000
[    0.000000] PM: Registered nosave memory: 000000007ff91000 - 0000000080000000
[    0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
[    0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s82880 r8192 d23616 u1048576
[    0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031174
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=36866c4a-08a5-4a58-8ba5-a26165406526 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 0 size 32 MB
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[    0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[    0.000000] Memory: 3982616k/4980736k available (3418k kernel code, 787924k absent, 210196k reserved, 3319k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2612.272 MHz processor.
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.008006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.54 BogoMIPS (lpj=10449088)
[    0.008010] pid_max: default: 32768 minimum: 301
[    0.008058] Security Framework initialized
[    0.008064] AppArmor: AppArmor disabled by boot time parameter
[    0.008383] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010714] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.012890] Mount-cache hash table entries: 256
[    0.013035] Initializing cgroup subsys cpuacct
[    0.013040] Initializing cgroup subsys memory
[    0.013053] Initializing cgroup subsys devices
[    0.013055] Initializing cgroup subsys freezer
[    0.013057] Initializing cgroup subsys net_cls
[    0.013061] Initializing cgroup subsys blkio
[    0.013070] Initializing cgroup subsys perf_event
[    0.013100] tseg: 00cff80000
[    0.013102] CPU: Physical Processor ID: 0
[    0.013103] CPU: Processor Core ID: 0
[    0.013105] mce: CPU supports 5 MCE banks
[    0.013403] ACPI: Core revision 20110623
[    0.016443] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.057924] CPU0: Dual Core AMD Opteron(tm) Processor 285 stepping 02
[    0.060003] Performance Events: AMD PMU driver.
[    0.060003] ... version:                0
[    0.060003] ... bit width:              48
[    0.060003] ... generic registers:      4
[    0.060003] ... value mask:             0000ffffffffffff
[    0.060003] ... max period:             00007fffffffffff
[    0.060003] ... fixed-purpose events:   0
[    0.060003] ... event mask:             000000000000000f
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1 Ok.
[    0.060003] smpboot cpu 1: start_ip = 96000
[    0.144091] NMI watchdog enabled, takes one hw-pmu counter.
[    0.144113] Brought up 2 CPUs
[    0.144116] Total of 2 processors activated (10448.95 BogoMIPS).
[    0.144712] devtmpfs: initialized
[    0.147070] PM: Registering ACPI NVS region at 7ff91000 (454656 bytes)
[    0.148197] print_constraints: dummy: 
[    0.148269] NET: Registered protocol family 16
[    0.148373] node 0 link 0: io port [1000, 1fff]
[    0.148376] TOM: 00000000d0000000 aka 3328M
[    0.148379] node 0 link 0: mmio [d4000000, dbffffff]
[    0.148382] node 0 link 0: mmio [d4000000, d400ffff]
[    0.148384] node 0 link 2: mmio [dc000000, dc3fffff]
[    0.148387] node 0 link 0: mmio [a0000, bffff]
[    0.148389] TOM2: 0000000130000000 aka 4864M
[    0.148392] bus: [00, 0f] on node 0 link 0
[    0.148394] bus: 00 index 0 [io  0x0000-0xffff]
[    0.148396] bus: 00 index 1 [mem 0xd0000000-0xdbffffff]
[    0.148398] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[    0.148400] bus: 00 index 3 [mem 0xdc400000-0xffffffff]
[    0.148402] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[    0.148404] bus: [10, ff] on node 0 link 2
[    0.148406] bus: 10 index 0 [mem 0xdc000000-0xdc3fffff]
[    0.148416] ACPI: bus type pci registered
[    0.148482] PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
[    0.148486] PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
[    0.149274] PCI: Using configuration type 1 for base access
[    0.149974] bio: create slab <bio-0> at 0
[    0.149974] ACPI: Added _OSI(Module Device)
[    0.149974] ACPI: Added _OSI(Processor Device)
[    0.149974] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.149974] ACPI: Added _OSI(Processor Aggregator Device)
[    0.149974] ACPI: EC: Look up EC in DSDT
[    0.153555] ACPI: Interpreter enabled
[    0.153560] ACPI: (supports S0 S1 S4 S5)
[    0.153577] ACPI: Using IOAPIC for interrupt routing
[    0.157660] ACPI: No dock devices found.
[    0.157662] HEST: Table not found.
[    0.157666] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.157841] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-0f])
[    0.158176] pci_root PNP0A03:00: host bridge window [io  0x0000-0x03df]
[    0.158178] pci_root PNP0A03:00: host bridge window [io  0x03e0-0x0cf7]
[    0.158181] pci_root PNP0A03:00: host bridge window [io  0x0d00-0x1fff]
[    0.158183] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000dffff]
[    0.158186] pci_root PNP0A03:00: host bridge window [mem 0xd4000000-0xdbffffff]
[    0.158193] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000a0000-0x000dffff] (conflicts with reserved [mem 0x000c8000-0x000fffff])
[    0.158207] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[    0.158272] pci 0000:00:01.0: [10de:0051] type 0 class 0x000601
[    0.158277] pci 0000:00:01.0: reg 10: [io  0x8c00-0x8fff]
[    0.158292] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.158303] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[    0.158309] pci 0000:00:01.1: reg 10: [io  0x0000-0x001f]
[    0.158320] pci 0000:00:01.1: reg 20: [io  0xa000-0xa03f]
[    0.158324] pci 0000:00:01.1: reg 24: [io  0xa040-0xa07f]
[    0.158336] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.158351] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[    0.158358] pci 0000:00:02.0: reg 10: [mem 0xd4000000-0xd4000fff]
[    0.158380] pci 0000:00:02.0: supports D1 D2
[    0.158382] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.158393] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[    0.158499] pci 0000:00:02.1: reg 10: [mem 0xd4001000-0xd40010ff]
[    0.158526] pci 0000:00:02.1: supports D1 D2
[    0.158528] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.158545] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
[    0.158551] pci 0000:00:04.0: reg 10: [io  0x1800-0x18ff]
[    0.158555] pci 0000:00:04.0: reg 14: [io  0x1400-0x14ff]
[    0.158560] pci 0000:00:04.0: reg 18: [mem 0xd4002000-0xd4002fff]
[    0.158577] pci 0000:00:04.0: supports D1 D2
[    0.158590] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
[    0.158604] pci 0000:00:06.0: reg 20: [io  0x1c00-0x1c0f]
[    0.158626] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
[    0.158632] pci 0000:00:07.0: reg 10: [io  0x1c40-0x1c47]
[    0.158636] pci 0000:00:07.0: reg 14: [io  0x1c34-0x1c37]
[    0.158640] pci 0000:00:07.0: reg 18: [io  0x1c38-0x1c3f]
[    0.158644] pci 0000:00:07.0: reg 1c: [io  0x1c30-0x1c33]
[    0.158648] pci 0000:00:07.0: reg 20: [io  0x1c10-0x1c1f]
[    0.158652] pci 0000:00:07.0: reg 24: [mem 0xd4003000-0xd4003fff]
[    0.158671] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
[    0.158678] pci 0000:00:08.0: reg 10: [io  0x1c58-0x1c5f]
[    0.158682] pci 0000:00:08.0: reg 14: [io  0x1c4c-0x1c4f]
[    0.158686] pci 0000:00:08.0: reg 18: [io  0x1c50-0x1c57]
[    0.158690] pci 0000:00:08.0: reg 1c: [io  0x1c48-0x1c4b]
[    0.158694] pci 0000:00:08.0: reg 20: [io  0x1c20-0x1c2f]
[    0.158698] pci 0000:00:08.0: reg 24: [mem 0xd4004000-0xd4004fff]
[    0.158716] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[    0.158733] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
[    0.158740] pci 0000:00:0a.0: reg 10: [mem 0xd4005000-0xd4005fff]
[    0.158744] pci 0000:00:0a.0: reg 14: [io  0x1c60-0x1c67]
[    0.158764] pci 0000:00:0a.0: supports D1 D2
[    0.158766] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.158780] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[    0.158803] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.158821] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.158843] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.158858] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.158872] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.158902] pci 0000:01:04.0: [5333:8a01] type 0 class 0x000300
[    0.158910] pci 0000:01:04.0: reg 10: [mem 0xd8000000-0xdbffffff]
[    0.158937] pci 0000:01:04.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.158963] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.158966] pci 0000:00:09.0:   bridge window [mem 0xd8000000-0xdbffffff]
[    0.158969] pci 0000:00:09.0:   bridge window [io  0x0000-0x03df] (subtractive decode)
[    0.158972] pci 0000:00:09.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.158975] pci 0000:00:09.0:   bridge window [io  0x0d00-0x1fff] (subtractive decode)
[    0.158977] pci 0000:00:09.0:   bridge window [mem 0xd4000000-0xdbffffff] (subtractive decode)
[    0.158994] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[    0.159003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.159070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[    0.159105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[    0.159138]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.159142]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.159144] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.169277] ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus 10-87])
[    0.169586] pci_root PNP0A03:01: host bridge window [mem 0x000c0000-0x000dffff]
[    0.169588] pci_root PNP0A03:01: host bridge window [mem 0xdc000000-0xdc3fffff]
[    0.169592] pci_root PNP0A03:01: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000c8000-0x000fffff])
[    0.169607] pci 0000:10:0a.0: [1022:7450] type 1 class 0x000604
[    0.169649] pci 0000:10:0a.1: [1022:7451] type 0 class 0x000800
[    0.169657] pci 0000:10:0a.1: reg 10: [mem 0xdc000000-0xdc000fff 64bit]
[    0.169688] pci 0000:10:0b.0: [1022:7450] type 1 class 0x000604
[    0.169725] pci 0000:10:0b.1: [1022:7451] type 0 class 0x000800
[    0.169733] pci 0000:10:0b.1: reg 10: [mem 0xdc001000-0xdc001fff 64bit]
[    0.169793] pci 0000:10:0a.0: PCI bridge to [bus 11-11]
[    0.169828] pci 0000:10:0b.0: PCI bridge to [bus 12-12]
[    0.169843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT]
[    0.169878] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT]
[    0.169933]  pci0000:10: Requesting ACPI _OSC control (0x1d)
[    0.169936]  pci0000:10: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.169937] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.170303] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
[    0.170378] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0, disabled.
[    0.170446] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0, disabled.
[    0.170513] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled.
[    0.170581] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
[    0.170648] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled.
[    0.170716] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
[    0.170783] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0
[    0.170851] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0
[    0.170918] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0
[    0.170985] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
[    0.171053] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
[    0.171125] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
[    0.171198] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0
[    0.171271] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[    0.171375] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    0.171375] vgaarb: loaded
[    0.171375] vgaarb: bridge control possible 0000:01:04.0
[    0.171375] PCI: Using ACPI for IRQ routing
[    0.171375] PCI: pci_cache_line_size set to 64 bytes
[    0.171375] pci 0000:00:01.0: no compatible bridge window for [io  0x8c00-0x8fff]
[    0.171375] pci 0000:00:01.1: no compatible bridge window for [io  0xa000-0xa03f]
[    0.171375] pci 0000:00:01.1: no compatible bridge window for [io  0xa040-0xa07f]
[    0.171375] reserve RAM buffer: 000000000009b400 - 000000000009ffff 
[    0.171375] reserve RAM buffer: 000000007ff80000 - 000000007fffffff 
[    0.171375] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff 
[    0.173615] pnp: PnP ACPI init
[    0.173636] ACPI: bus type pnp registered
[    0.173740] pnp 00:00: [mem 0xffc00000-0xffffffff]
[    0.173743] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[    0.173745] pnp 00:00: [mem 0xfee00000-0xfeefffff]
[    0.173747] pnp 00:00: [mem 0xfefff000-0xfeffffff]
[    0.173815] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
[    0.173818] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.173821] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.173824] system 00:00: [mem 0xfefff000-0xfeffffff] has been reserved
[    0.173827] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.173996] pnp 00:01: [bus 00-0f]
[    0.173998] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.174001] pnp 00:01: [io  0x0000-0x03df window]
[    0.174003] pnp 00:01: [io  0x03e0-0x0cf7 window]
[    0.174005] pnp 00:01: [io  0x0d00-0x1fff window]
[    0.174007] pnp 00:01: [mem 0x000a0000-0x000dffff window]
[    0.174010] pnp 00:01: [mem 0xd4000000-0xdbffffff window]
[    0.174074] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.174270] pnp 00:02: [io  0x8000-0x807f]
[    0.174272] pnp 00:02: [io  0x8080-0x80ff]
[    0.174274] pnp 00:02: [io  0x8400-0x847f]
[    0.174276] pnp 00:02: [io  0x8480-0x84ff]
[    0.174278] pnp 00:02: [io  0x8800-0x887f]
[    0.174280] pnp 00:02: [io  0x8880-0x88ff]
[    0.174282] pnp 00:02: [io  0xa000-0xa03f]
[    0.174284] pnp 00:02: [io  0xa040-0xa07f]
[    0.174332] system 00:02: [io  0x8000-0x807f] has been reserved
[    0.174334] system 00:02: [io  0x8080-0x80ff] has been reserved
[    0.174337] system 00:02: [io  0x8400-0x847f] has been reserved
[    0.174340] system 00:02: [io  0x8480-0x84ff] has been reserved
[    0.174342] system 00:02: [io  0x8800-0x887f] has been reserved
[    0.174345] system 00:02: [io  0x8880-0x88ff] has been reserved
[    0.174348] system 00:02: [io  0xa000-0xa03f] has been reserved
[    0.174350] system 00:02: [io  0xa040-0xa07f] has been reserved
[    0.174353] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174367] pnp 00:03: [io  0x0010-0x001f]
[    0.174369] pnp 00:03: [io  0x0022-0x003f]
[    0.174371] pnp 00:03: [io  0x0044-0x005f]
[    0.174373] pnp 00:03: [io  0x0062-0x0063]
[    0.174375] pnp 00:03: [io  0x0065-0x006f]
[    0.174377] pnp 00:03: [io  0x0072-0x0073]
[    0.174379] pnp 00:03: [io  0x0074-0x007f]
[    0.174381] pnp 00:03: [io  0x0091-0x0093]
[    0.174383] pnp 00:03: [io  0x0097-0x009f]
[    0.174386] pnp 00:03: [io  0x00a2-0x00bf]
[    0.174388] pnp 00:03: [io  0x00e0-0x00ef]
[    0.174390] pnp 00:03: [io  0x04d0-0x04d1]
[    0.174392] pnp 00:03: [io  0x0080]
[    0.174394] pnp 00:03: [io  0x0400-0x045e]
[    0.174397] pnp 00:03: [io  0x9000-0x907f]
[    0.174399] pnp 00:03: [io  0x9080-0x90ff]
[    0.174401] pnp 00:03: [io  0x9200-0x927f]
[    0.174403] pnp 00:03: [io  0x9280-0x92ff]
[    0.174405] pnp 00:03: [io  0x9400-0x947f]
[    0.174407] pnp 00:03: [io  0x9480-0x94ff]
[    0.174412] pnp 00:03: disabling [io  0x0010-0x001f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174415] pnp 00:03: disabling [io  0x0022-0x003f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174419] pnp 00:03: disabling [io  0x0044-0x005f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174422] pnp 00:03: disabling [io  0x0062-0x0063] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174425] pnp 00:03: disabling [io  0x0065-0x006f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174428] pnp 00:03: disabling [io  0x0072-0x0073] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174432] pnp 00:03: disabling [io  0x0074-0x007f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174435] pnp 00:03: disabling [io  0x0091-0x0093] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174438] pnp 00:03: disabling [io  0x0097-0x009f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174441] pnp 00:03: disabling [io  0x00a2-0x00bf] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174445] pnp 00:03: disabling [io  0x00e0-0x00ef] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174448] pnp 00:03: disabling [io  0x0080] because it overlaps 0000:00:01.0 BAR 0 [io  0x0000-0x03ff]
[    0.174452] pnp 00:03: disabling [io  0x0010-0x001f disabled] because it overlaps 0000:00:01.1 BAR 0 [io  0x0000-0x001f]
[    0.174457] pnp 00:03: disabling [io  0x0010-0x001f disabled] because it overlaps 0000:00:01.1 BAR 4 [io  0x0000-0x003f]
[    0.174460] pnp 00:03: disabling [io  0x0022-0x003f disabled] because it overlaps 0000:00:01.1 BAR 4 [io  0x0000-0x003f]
[    0.174464] pnp 00:03: disabling [io  0x0010-0x001f disabled] because it overlaps 0000:00:01.1 BAR 5 [io  0x0000-0x003f]
[    0.174468] pnp 00:03: disabling [io  0x0022-0x003f disabled] because it overlaps 0000:00:01.1 BAR 5 [io  0x0000-0x003f]
[    0.174523] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.174526] system 00:03: [io  0x0400-0x045e] has been reserved
[    0.174529] system 00:03: [io  0x9000-0x907f] has been reserved
[    0.174531] system 00:03: [io  0x9080-0x90ff] has been reserved
[    0.174534] system 00:03: [io  0x9200-0x927f] has been reserved
[    0.174537] system 00:03: [io  0x9280-0x92ff] has been reserved
[    0.174539] system 00:03: [io  0x9400-0x947f] has been reserved
[    0.174542] system 00:03: [io  0x9480-0x94ff] has been reserved
[    0.174545] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174560] pnp 00:04: [io  0x0000-0x0008]
[    0.174562] pnp 00:04: [io  0x000a-0x000f]
[    0.174564] pnp 00:04: [io  0x0081-0x0083]
[    0.174566] pnp 00:04: [io  0x0087]
[    0.174568] pnp 00:04: [io  0x0089-0x008b]
[    0.174570] pnp 00:04: [io  0x008f]
[    0.174572] pnp 00:04: [io  0x00c0-0x00d1]
[    0.174574] pnp 00:04: [io  0x00d4-0x00df]
[    0.174576] pnp 00:04: [dma 4]
[    0.174602] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.174611] pnp 00:05: [io  0x0061]
[    0.174639] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.174649] pnp 00:06: [io  0x0070-0x0071]
[    0.174661] pnp 00:06: [irq 8]
[    0.174688] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.174699] pnp 00:07: [io  0x00f0-0x00f1]
[    0.174705] pnp 00:07: [irq 13]
[    0.174732] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.174880] pnp 00:08: [io  0x03f8-0x03ff]
[    0.174886] pnp 00:08: [irq 4]
[    0.174956] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.175161] pnp 00:09: [io  0x03f0-0x03f5]
[    0.175163] pnp 00:09: [io  0x03f7]
[    0.175168] pnp 00:09: [irq 6]
[    0.175170] pnp 00:09: [dma 2]
[    0.175217] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.175275] pnp 00:0a: [io  0x0060]
[    0.175277] pnp 00:0a: [io  0x0064]
[    0.175283] pnp 00:0a: [irq 1]
[    0.175318] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.175336] pnp 00:0b: [irq 12]
[    0.175371] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.175763] pnp 00:0c: [bus 10-7f]
[    0.175766] pnp 00:0c: [io  0x0cf8-0x0cff]
[    0.175768] pnp 00:0c: [io  0x0000 window]
[    0.175770] pnp 00:0c: [io  0x0000 window]
[    0.175773] pnp 00:0c: [mem 0x000c0000-0x000dffff window]
[    0.175775] pnp 00:0c: [mem 0xdc000000-0xdc3fffff window]
[    0.175817] pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.175846] pnp: PnP ACPI: found 13 devices
[    0.175848] ACPI: ACPI bus type pnp unregistered
[    0.182517] Switching to clocksource acpi_pm
[    0.182542] PCI: max bus depth: 1 pci_try_num: 2
[    0.182563] pci 0000:00:09.0: BAR 15: assigned [mem 0xd4100000-0xd41fffff pref]
[    0.182567] pci 0000:00:01.0: BAR 0: assigned [io  0x0800-0x0bff]
[    0.182570] pci 0000:00:01.0: BAR 0: error updating (0x000801 != 0x008c01)
[    0.182607] pci 0000:00:01.1: BAR 4: assigned [io  0x0480-0x04bf]
[    0.182611] pci 0000:00:01.1: BAR 5: assigned [io  0x0c00-0x0c3f]
[    0.182615] pci 0000:00:01.1: BAR 0: assigned [io  0x0460-0x047f]
[    0.182619] pci 0000:01:04.0: BAR 6: assigned [mem 0xd4100000-0xd410ffff pref]
[    0.182622] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[    0.182625] pci 0000:00:09.0:   bridge window [mem 0xd8000000-0xdbffffff]
[    0.182628] pci 0000:00:09.0:   bridge window [mem 0xd4100000-0xd41fffff pref]
[    0.182631] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[    0.182637] pci 0000:10:0a.0: PCI bridge to [bus 11-11]
[    0.182643] pci 0000:10:0b.0: PCI bridge to [bus 12-12]
[    0.182653] pci 0000:00:09.0: setting latency timer to 64
[    0.182656] pci 0000:00:0e.0: setting latency timer to 64
[    0.182663] pci_bus 0000:00: resource 4 [io  0x0000-0x03df]
[    0.182665] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.182667] pci_bus 0000:00: resource 6 [io  0x0d00-0x1fff]
[    0.182670] pci_bus 0000:00: resource 7 [mem 0xd4000000-0xdbffffff]
[    0.182672] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xdbffffff]
[    0.182675] pci_bus 0000:01: resource 2 [mem 0xd4100000-0xd41fffff pref]
[    0.182677] pci_bus 0000:01: resource 4 [io  0x0000-0x03df]
[    0.182679] pci_bus 0000:01: resource 5 [io  0x03e0-0x0cf7]
[    0.182681] pci_bus 0000:01: resource 6 [io  0x0d00-0x1fff]
[    0.182684] pci_bus 0000:01: resource 7 [mem 0xd4000000-0xdbffffff]
[    0.182686] pci_bus 0000:10: resource 4 [mem 0xdc000000-0xdc3fffff]
[    0.182764] NET: Registered protocol family 2
[    0.182913] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.182913] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.186341] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.186901] TCP: Hash tables configured (established 524288 bind 65536)
[    0.186904] TCP reno registered
[    0.186916] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.186957] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.187111] NET: Registered protocol family 1
[    0.187306] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[    0.444135] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[    0.444203] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.444208] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    0.444215] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.444218] pci 0000:00:0e.0: Linking AER extended capability
[    0.444231] pci 0000:01:04.0: Boot video device
[    0.444234] pci 0000:10:0a.0: MSI quirk detected; subordinate MSI disabled
[    0.444237] pci 0000:10:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[    0.444243] pci 0000:10:0b.0: MSI quirk detected; subordinate MSI disabled
[    0.444245] pci 0000:10:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[    0.444250] PCI: CLS 64 bytes, default 64
[    0.444307] Unpacking initramfs...
[    0.683044] Freeing initrd memory: 10460k freed
[    0.689537] PCI-DMA: Disabling AGP.
[    0.689653] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    0.689655] PCI-DMA: using GART IOMMU.
[    0.689659] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.692939] Simple Boot Flag at 0x36 set to 0x1
[    0.693403] audit: initializing netlink socket (disabled)
[    0.693417] type=2000 audit(1362263047.692:1): initialized
[    0.706485] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.707254] VFS: Disk quotas dquot_6.5.2
[    0.707284] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.707359] msgmni has been set to 7927
[    0.707594] alg: No test for stdrng (krng)
[    0.707630] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.707633] io scheduler noop registered
[    0.707635] io scheduler deadline registered
[    0.707654] io scheduler cfq registered (default)
[    0.707754] pcieport 0000:00:0e.0: setting latency timer to 64
[    0.707778] pcieport 0000:00:0e.0: irq 48 for MSI/MSI-X
[    0.707920] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.707950] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.707952] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.708365] ERST: Table is not found!
[    0.708366] GHES: HEST is not enabled!
[    0.708439] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.728726] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.780452] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.780712] Linux agpgart interface v0.103
[    0.780825] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.032407] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.032508] mousedev: PS/2 mouse device common for all mice
[    1.032556] rtc_cmos 00:06: RTC can wake from S4
[    1.032674] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.032700] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    1.032712] cpuidle: using governor ladder
[    1.032714] cpuidle: using governor menu
[    1.032904] TCP cubic registered
[    1.032961] NET: Registered protocol family 10
[    1.033420] Mobile IPv6
[    1.033423] NET: Registered protocol family 17
[    1.033427] Registering the dns_resolver key type
[    1.033590] PM: Hibernation image not present or could not be loaded.
[    1.033601] registered taskstats version 1
[    1.034018] rtc_cmos 00:06: setting system clock to 2013-03-02 22:24:09 UTC (1362263049)
[    1.034069] Initializing network drop monitor service
[    1.035270] Freeing unused kernel memory: 576k freed
[    1.035528] Write protecting the kernel read-only data: 6144k
[    1.038191] Freeing unused kernel memory: 660k freed
[    1.041176] Freeing unused kernel memory: 680k freed
[    1.052363] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.052941] udevd[49]: starting version 175
[    1.087414] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.087574] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[    1.087592] forcedeth 0000:00:0a.0: setting latency timer to 64
[    1.091072] SCSI subsystem initialized
[    1.099935] usbcore: registered new interface driver usbfs
[    1.099962] usbcore: registered new interface driver hub
[    1.108205] usbcore: registered new device driver usb
[    1.108714] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.113858] libata version 3.00 loaded.
[    1.132508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.137556] Floppy drive(s): fd0 is 1.44M
[    1.155540] FDC 0 is a post-1991 82077
[    1.612613] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:e0:81:57:44:80
[    1.612617] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[    1.612693] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    1.612696] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    1.612721] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.612759] ehci_hcd 0000:00:02.1: debug port 1
[    1.612763] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    1.612784] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd4001000
[    1.624026] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.624048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.624051] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.624053] usb usb1: Product: EHCI Host Controller
[    1.624055] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.624057] usb usb1: SerialNumber: 0000:00:02.1
[    1.624185] hub 1-0:1.0: USB hub found
[    1.624190] hub 1-0:1.0: 10 ports detected
[    1.624289] pata_amd 0000:00:06.0: version 0.4.1
[    1.624334] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.624925] scsi0 : pata_amd
[    1.625249] scsi1 : pata_amd
[    1.625676] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
[    1.625679] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
[    1.625734] sata_nv 0000:00:07.0: version 3.5
[    1.625875] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
[    1.625940] sata_nv 0000:00:07.0: setting latency timer to 64
[    1.626325] scsi2 : sata_nv
[    1.626417] scsi3 : sata_nv
[    1.626521] ata3: SATA max UDMA/133 cmd 0x1c40 ctl 0x1c34 bmdma 0x1c10 irq 20
[    1.626523] ata4: SATA max UDMA/133 cmd 0x1c38 ctl 0x1c30 bmdma 0x1c18 irq 20
[    1.626709] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 23
[    1.626744] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.626992] scsi4 : sata_nv
[    1.627077] scsi5 : sata_nv
[    1.627182] ata5: SATA max UDMA/133 cmd 0x1c58 ctl 0x1c4c bmdma 0x1c20 irq 23
[    1.627185] ata6: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c48 bmdma 0x1c28 irq 23
[    1.627234] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    1.627237] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    1.627252] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.627265] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd4000000
[    1.682021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.682024] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.682026] usb usb2: Product: OHCI Host Controller
[    1.682028] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    1.682030] usb usb2: SerialNumber: 0000:00:02.0
[    1.682172] hub 2-0:1.0: USB hub found
[    1.682177] hub 2-0:1.0: 10 ports detected
[    1.804281] ata1.00: ATAPI: SONY    CD-RW  CRX320EE, RYK4, max UDMA/33
[    1.804289] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[    1.836182] ata1.00: configured for UDMA/33
[    1.838086] scsi 0:0:0:0: CD-ROM            SONY     CD-RW  CRX320EE  RYK4 PQ: 0 ANSI: 5
[    1.936033] ata3: SATA link down (SStatus 0 SControl 310)
[    1.936037] ata5: SATA link down (SStatus 0 SControl 310)
[    1.936053] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[    2.077557] usb 1-2: New USB device found, idVendor=0ace, idProduct=1215
[    2.077560] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=0
[    2.077562] usb 1-2: Product: USB2.0 WLAN
[    2.077564] usb 1-2: Manufacturer: ZyDAS
[    2.468026] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[    2.492140] ata4.00: ATA-7: WDC WD2500YS-01SHB1, 20.06C06, max UDMA/133
[    2.492144] ata4.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.501116] ata4.00: configured for UDMA/133
[    2.501243] scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500YS-01S 20.0 PQ: 0 ANSI: 5
[    2.812029] ata6: SATA link down (SStatus 0 SControl 310)
[    2.820320] sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[    2.820324] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.820558] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.820825] sd 3:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[    2.820871] sd 3:0:0:0: [sda] Write Protect is off
[    2.820873] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.820893] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.822784] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.822847] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    2.844757]  sda: sda1 sda2 < sda5 >
[    2.845158] sd 3:0:0:0: [sda] Attached SCSI disk
[    3.194354] microcode: CPU0: family 15 not supported
[    3.194497] microcode: CPU1: family 15 not supported
[    3.194537] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[    3.254254] PM: Starting manual resume from disk
[    3.254258] PM: Hibernation image partition 8:5 present
[    3.254260] PM: Looking for hibernation image.
[    3.254489] PM: Image not found (code -22)
[    3.254493] PM: Hibernation image not present or could not be loaded.
[    3.346484] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.224108] udevd[354]: starting version 175
[    5.707507] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    5.707515] ACPI: Power Button [PWRB]
[    5.707597] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    5.707600] ACPI: Power Button [PWRF]
[    5.726173] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    5.745052] powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 285 (2 cpu cores) (version 2.20.00)
[    5.745065] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[    5.745066] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[    5.954213] EDAC MC: Ver: 2.1.0
[    5.985781] i2c i2c-0: nForce2 SMBus adapter at 0x480
[    5.985808] i2c i2c-1: nForce2 SMBus adapter at 0xc00
[    5.990898] MCE: In-kernel MCE decoding enabled.
[    6.000226] shpchp 0000:10:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[    6.000230] shpchp 0000:10:0a.0: Cannot reserve MMIO region
[    6.000356] shpchp 0000:10:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[    6.000359] shpchp 0000:10:0b.0: Cannot reserve MMIO region
[    6.000422] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.036782] AMD64 EDAC driver v3.4.0
[    6.036829] EDAC amd64: DRAM ECC enabled.
[    6.036836] EDAC amd64: K8 revE or earlier detected (node 0).
[    6.036880] EDAC amd64: CS0: Registered Double data rate SDRAM
[    6.036882] EDAC amd64: CS2: Registered Double data rate SDRAM
[    6.036911] EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2
[    6.037004] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[    6.177721] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
[    6.177751] snd_intel8x0 0000:00:04.0: setting latency timer to 64
[    6.486092] cfg80211: Calling CRDA to update world regulatory domain
[    6.596024] intel8x0_measure_ac97_clock: measured 54808 usecs (2688 samples)
[    6.596028] intel8x0: clocking to 46979
[    6.668026] usb 1-2: reset high-speed USB device number 2 using ehci_hcd
[    6.823068] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.823540] zd1211rw 1-2:1.0: phy0
[    6.823563] usbcore: registered new interface driver zd1211rw
[    7.381925] cfg80211: World regulatory domain updated:
[    7.381930] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    7.381933] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.381936] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    7.381939] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    7.381941] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.381944] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.462700] Adding 8383484k swap on /dev/sda5.  Priority:-1 extents:1 across:8383484k 
[    8.476267] EXT4-fs (sda1): re-mounted. Opts: (null)
[    8.663421] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.819093] loop: module loaded
[    9.880926] usb 1-2: firmware: agent loaded zd1211/zd1211b_ub into memory
[    9.888977] usb 1-2: firmware: agent loaded zd1211/zd1211b_uphr into memory
[    9.925929] zd1211rw 1-2:1.0: firmware version 4725
[    9.965937] zd1211rw 1-2:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--NS
[    9.968948] cfg80211: Calling CRDA for country: DE
[    9.973045] cfg80211: Regulatory domain changed to country: DE
[    9.973049] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.973052] cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    9.973054] cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    9.973057] cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    9.973059] cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[    9.986567] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.196946] wlan0: authenticate with 00:14:6c:53:54:c8 (try 1)
[   11.199442] wlan0: authenticated
[   11.235939] wlan0: associate with 00:14:6c:53:54:c8 (try 1)
[   11.238935] wlan0: RX AssocResp from 00:14:6c:53:54:c8 (capab=0x411 status=0 aid=1)
[   11.238937] wlan0: associated
[   11.240538] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   14.728178] Bluetooth: Core ver 2.16
[   14.728205] NET: Registered protocol family 31
[   14.728207] Bluetooth: HCI device and connection manager initialized
[   14.728211] Bluetooth: HCI socket layer initialized
[   14.728213] Bluetooth: L2CAP socket layer initialized
[   14.728219] Bluetooth: SCO socket layer initialized
[   14.802075] Bluetooth: RFCOMM TTY layer initialized
[   14.802081] Bluetooth: RFCOMM socket layer initialized
[   14.802083] Bluetooth: RFCOMM ver 1.11
[   15.053369] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.053372] Bluetooth: BNEP filters: protocol multicast
[   17.127151] forcedeth 0000:00:0a.0: eth0: no link during initialization
[   17.128167] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.466931] mtrr: type mismatch for d8000000,200000 old: write-back new: write-combining


More information about the coreboot mailing list