[coreboot] Tyan S2895 SATA, USB, ethernet not working
Andrew Basterfield
abasterfield at gmail.com
Mon Mar 4 21:46:25 CET 2013
On 03/03/13 16:48, Andrew Goodbody wrote:
> On 03/03/13 14:28, Andrew Basterfield wrote:
>> Hi Andrew
>>
>> The lack of 2nd PCIe and ethernet is expected behavior when the 2nd
>> socket is empty - please see the following
>>
>> ftp://ftp.tyan.com/manuals/m_s2895_101.pdf
>>
>> Please see 2nd 'NOTE' section 2.4 page 18
>>
>> Looking at the system architecture section 2.2, page 9, it becomes clear
>> why this is so.
>
> Ooh, ugly. Sorry, I misunderstood what you were saying was the problem.
>
>> I think I will have to re-cap the board to restore the 2nd CPU socket to
>> eliminate this variable.
>>
>> --Andrew
>
> You say it is stable with one CPU using the Tyan BIOS so it is at least
> possible to use the board as is.
> There is certainly code in the S2895 devtree and mptable to allow for
> the missing devices caused by a missing 2nd CPU but I have no idea how
> well tested that is. How does it behave if you boot with ACPI disabled?
>
> Andrew
Hi
It is much much better with ACPI disabled for the kernel; debian boots,
I get SATA and USB although no onboard ethernet.
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel at lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=36866c4a-08a5-4a58-8ba5-a26165406526 ro vga=normal verbose acpi=off
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Tyan S2895, BIOS 4.0-3575-g27bd64a 02/28/2013
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
[ 0.000000] 1 base 0100000000 mask FF80000000 write-back
[ 0.000000] 2 base 0180000000 mask FFC0000000 write-back
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd970] fd970
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffe0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bffe0000 page 4k
[ 0.000000] kernel direct mapping tables up to bffe0000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001c0000000
[ 0.000000] 0100000000 - 01c0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1c0000000 @ bffdc000-bffe0000
[ 0.000000] RAMDISK: 36b82000 - 375b9000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001c0000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001c0000000
[ 0.000000] NODE_DATA [00000001bfffb000 - 00000001bfffffff]
[ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b9600000-ffff8801be9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001c0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffe0
[ 0.000000] 0: 0x00100000 -> 0x001c0000
[ 0.000000] On node 0 totalpages: 1572719
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 768024 pages, LIFO batch:31
[ 0.000000] Normal zone: 10752 pages used for memmap
[ 0.000000] Normal zone: 775680 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: Tyan
[ 0.000000] MPTABLE: Product ID: S2895
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfc000000, GSI 24-27
[ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfc001000, GSI 28-31
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:40000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801bfc00000 s82880 r8192 d23616 u1048576
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1547626
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=36866c4a-08a5-4a58-8ba5-a26165406526 ro vga=normal verbose acpi=off
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ f8000000 size 64 MB
[ 0.000000] Memory: 6119588k/7340032k available (3418k kernel code, 1049156k absent, 171288k reserved, 3319k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2613.307 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008066] Calibrating delay loop (skipped), value calculated using timer frequency.. 5226.61 BogoMIPS (lpj=10453228)
[ 0.008191] pid_max: default: 32768 minimum: 301
[ 0.008300] Security Framework initialized
[ 0.008358] AppArmor: AppArmor disabled by boot time parameter
[ 0.009043] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.015706] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018246] Mount-cache hash table entries: 256
[ 0.018464] Initializing cgroup subsys cpuacct
[ 0.018527] Initializing cgroup subsys memory
[ 0.018603] Initializing cgroup subsys devices
[ 0.018664] Initializing cgroup subsys freezer
[ 0.018724] Initializing cgroup subsys net_cls
[ 0.018785] Initializing cgroup subsys blkio
[ 0.018852] Initializing cgroup subsys perf_event
[ 0.018942] tseg: 0000000000
[ 0.018962] CPU: Physical Processor ID: 0
[ 0.019016] CPU: Processor Core ID: 0
[ 0.019074] mce: CPU supports 5 MCE banks
[ 0.019497] ExtINT in hardware and MP table differ
[ 0.019911] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[ 0.059661] CPU0: Dual Core AMD Opteron(tm) Processor 285 stepping 02
[ 0.164024] Performance Events: AMD PMU driver.
[ 0.164120] ... version: 0
[ 0.164180] ... bit width: 48
[ 0.164240] ... generic registers: 4
[ 0.164299] ... value mask: 0000ffffffffffff
[ 0.164361] ... max period: 00007fffffffffff
[ 0.164423] ... fixed-purpose events: 0
[ 0.164483] ... event mask: 000000000000000f
[ 0.164731] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.164957] Booting Node 0, Processors #1 Ok.
[ 0.165045] smpboot cpu 1: start_ip = 9a000
[ 0.252071] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.252148] Brought up 2 CPUs
[ 0.252201] Total of 2 processors activated (10453.73 BogoMIPS).
[ 0.252939] devtmpfs: initialized
[ 0.256426] print_constraints: dummy:
[ 0.256426] NET: Registered protocol family 16
[ 0.256486] node 0 link 0: io port [1000, 2fff]
[ 0.256489] node 0 link 2: io port [4000, 7fff]
[ 0.256492] TOM: 00000000c0000000 aka 3072M
[ 0.256553] node 0 link 0: mmio [a0000, bffff]
[ 0.256556] node 0 link 2: mmio [fc000000, fc0fffff]
[ 0.256559] node 0 link 0: mmio [f0000000, f41fffff]
[ 0.256561] TOM2: 00000001c0000000 aka 7168M
[ 0.256622] bus: [00, 02] on node 0 link 0
[ 0.256624] bus: 00 index 0 [io 0x0000-0x3fff]
[ 0.256626] bus: 00 index 1 [io 0x8000-0xffff]
[ 0.256628] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.256630] bus: 00 index 3 [mem 0xc0000000-0xfbffffff]
[ 0.256632] bus: 00 index 4 [mem 0xfc100000-0xffffffff]
[ 0.256634] bus: 00 index 5 [mem 0x1c0000000-0xfcffffffff]
[ 0.256636] bus: [40, 42] on node 0 link 2
[ 0.256638] bus: 40 index 0 [io 0x4000-0x7fff]
[ 0.256640] bus: 40 index 1 [mem 0xfc000000-0xfc0fffff]
[ 0.256712] PCI: Using configuration type 1 for base access
[ 0.257542] bio: create slab <bio-0> at 0
[ 0.257542] ACPI: Interpreter disabled.
[ 0.257542] vgaarb: loaded
[ 0.257542] PCI: Probing PCI hardware
[ 0.257542] PCI: Probing PCI hardware (bus 00)
[ 0.257542] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[ 0.257542] pci 0000:00:01.0: [10de:0051] type 0 class 0x000601
[ 0.257542] pci 0000:00:01.0: reg 10: [io 0x2400-0x247f]
[ 0.257542] pci 0000:00:01.0: reg 14: [mem 0xfec00000-0xfec00fff]
[ 0.257542] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.257542] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[ 0.257542] pci 0000:00:01.1: reg 10: [io 0x2800-0x281f]
[ 0.257542] pci 0000:00:01.1: reg 20: [io 0x2480-0x24bf]
[ 0.257542] pci 0000:00:01.1: reg 24: [io 0x24c0-0x24ff]
[ 0.257542] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.257542] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[ 0.257542] pci 0000:00:02.0: reg 10: [mem 0xf4100000-0xf4100fff]
[ 0.257542] pci 0000:00:02.0: supports D1 D2
[ 0.257542] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.257542] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[ 0.257542] pci 0000:00:02.1: reg 10: [mem 0xf4105000-0xf41050ff]
[ 0.257542] pci 0000:00:02.1: supports D1 D2
[ 0.257542] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.257542] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
[ 0.257542] pci 0000:00:04.0: reg 10: [io 0x1c00-0x1cff]
[ 0.257542] pci 0000:00:04.0: reg 14: [io 0x2000-0x20ff]
[ 0.257542] pci 0000:00:04.0: reg 18: [mem 0xf4101000-0xf4101fff]
[ 0.257542] pci 0000:00:04.0: supports D1 D2
[ 0.257542] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
[ 0.257542] pci 0000:00:06.0: reg 20: [io 0x2820-0x282f]
[ 0.257542] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
[ 0.257542] pci 0000:00:07.0: reg 10: [io 0x2850-0x2857]
[ 0.257542] pci 0000:00:07.0: reg 14: [io 0x2878-0x287b]
[ 0.257542] pci 0000:00:07.0: reg 18: [io 0x2858-0x285f]
[ 0.257542] pci 0000:00:07.0: reg 1c: [io 0x287c-0x287f]
[ 0.257542] pci 0000:00:07.0: reg 20: [io 0x2830-0x283f]
[ 0.257542] pci 0000:00:07.0: reg 24: [mem 0xf4102000-0xf4102fff]
[ 0.257542] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
[ 0.257542] pci 0000:00:08.0: reg 10: [io 0x2860-0x2867]
[ 0.257542] pci 0000:00:08.0: reg 14: [io 0x2880-0x2883]
[ 0.257542] pci 0000:00:08.0: reg 18: [io 0x2868-0x286f]
[ 0.257542] pci 0000:00:08.0: reg 1c: [io 0x2884-0x2887]
[ 0.257542] pci 0000:00:08.0: reg 20: [io 0x2840-0x284f]
[ 0.257542] pci 0000:00:08.0: reg 24: [mem 0xf4103000-0xf4103fff]
[ 0.257542] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[ 0.257542] pci 0000:00:0a.0: [10de:0056] type 0 class 0x000200
[ 0.257542] pci 0000:00:0a.0: reg 10: [mem 0xf4104000-0xf4104fff]
[ 0.257542] pci 0000:00:0a.0: reg 14: [io 0x2870-0x2877]
[ 0.257542] pci 0000:00:0a.0: supports D1 D2
[ 0.257542] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.257542] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[ 0.257542] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.257542] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.257542] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.257542] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.257542] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.257542] PCI: peer root bus 00 res updated from pci conf
[ 0.257542] pci 0000:01:04.0: [5333:8a01] type 0 class 0x000300
[ 0.257542] pci 0000:01:04.0: reg 10: [mem 0xf0000000-0xf3ffffff]
[ 0.257542] pci 0000:01:04.0: reg 30: [mem 0xf4000000-0xf400ffff pref]
[ 0.257542] pci 0000:01:05.0: [104c:8023] type 0 class 0x000c00
[ 0.257542] pci 0000:01:05.0: reg 10: [mem 0xf4014000-0xf40147ff]
[ 0.257542] pci 0000:01:05.0: reg 14: [mem 0xf4010000-0xf4013fff]
[ 0.257542] pci 0000:01:05.0: supports D1 D2
[ 0.257542] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.257542] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf40fffff]
[ 0.257542] pci 0000:00:09.0: bridge window [io 0x0000-0x3fff] (subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [io 0x8000-0xffff] (subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xfbffffff] (subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [mem 0xfc100000-0xffffffff] (subtractive decode)
[ 0.257542] pci 0000:00:09.0: bridge window [mem 0x1c0000000-0xfcffffffff] (subtractive decode)
[ 0.257542] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.260235] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.260459] pci 0000:40:00.0: [1022:7450] type 1 class 0x000604
[ 0.260500] pci 0000:40:00.1: [1022:7451] type 0 class 0x000800
[ 0.260508] pci 0000:40:00.1: reg 10: [mem 0xfc000000-0xfc000fff 64bit]
[ 0.260540] pci 0000:40:01.0: [1022:7450] type 1 class 0x000604
[ 0.260578] pci 0000:40:01.1: [1022:7451] type 0 class 0x000800
[ 0.260586] pci 0000:40:01.1: reg 10: [mem 0xfc001000-0xfc001fff 64bit]
[ 0.260623] PCI: peer root bus 40 res updated from pci conf
[ 0.260655] pci 0000:40:00.0: PCI bridge to [bus 41-41]
[ 0.260749] pci 0000:40:01.0: PCI bridge to [bus 42-42]
[ 0.260974] PCI: Discovered primary peer bus 40 [IRQ]
[ 0.261040] pci 0000:00:09.0: default IRQ router [10de:005c]
[ 0.261111] PCI: pci_cache_line_size set to 64 bytes
[ 0.261159] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.261162] reserve RAM buffer: 00000000bffe0000 - 00000000bfffffff
[ 0.263376] pnp: PnP ACPI: disabled
[ 0.264105] PCI: max bus depth: 1 pci_try_num: 2
[ 0.264132] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.264192] pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf40fffff]
[ 0.264259] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.264322] pci 0000:40:00.0: PCI bridge to [bus 41-41]
[ 0.264385] pci 0000:40:01.0: PCI bridge to [bus 42-42]
[ 0.264453] pci 0000:00:09.0: setting latency timer to 64
[ 0.264457] pci 0000:00:0e.0: setting latency timer to 64
[ 0.264465] pci_bus 0000:00: resource 4 [io 0x0000-0x3fff]
[ 0.264467] pci_bus 0000:00: resource 5 [io 0x8000-0xffff]
[ 0.264470] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.264472] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfbffffff]
[ 0.264474] pci_bus 0000:00: resource 8 [mem 0xfc100000-0xffffffff]
[ 0.264477] pci_bus 0000:00: resource 9 [mem 0x1c0000000-0xfcffffffff]
[ 0.264479] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf40fffff]
[ 0.264482] pci_bus 0000:01: resource 4 [io 0x0000-0x3fff]
[ 0.264484] pci_bus 0000:01: resource 5 [io 0x8000-0xffff]
[ 0.264486] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.264488] pci_bus 0000:01: resource 7 [mem 0xc0000000-0xfbffffff]
[ 0.264490] pci_bus 0000:01: resource 8 [mem 0xfc100000-0xffffffff]
[ 0.264493] pci_bus 0000:01: resource 9 [mem 0x1c0000000-0xfcffffffff]
[ 0.264496] pci_bus 0000:40: resource 4 [io 0x4000-0x7fff]
[ 0.264498] pci_bus 0000:40: resource 5 [mem 0xfc000000-0xfc0fffff]
[ 0.264555] NET: Registered protocol family 2
[ 0.264838] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.269075] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.274089] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.274825] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.274890] TCP reno registered
[ 0.274964] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.275126] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.275393] NET: Registered protocol family 1
[ 0.275523] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 21
[ 0.275616] pci 0000:00:02.1: PCI->APIC IRQ transform: INT B -> IRQ 20
[ 0.275723] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.275782] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.275869] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.275934] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.276054] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.276115] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.276179] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 0.276252] pci 0000:01:04.0: Boot video device
[ 0.276257] pci 0000:40:00.0: MSI quirk detected; subordinate MSI disabled
[ 0.276322] pci 0000:40:00.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.276391] pci 0000:40:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.276457] pci 0000:40:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.276525] PCI: CLS 64 bytes, default 64
[ 0.276589] Unpacking initramfs...
[ 0.520650] Freeing initrd memory: 10460k freed
[ 0.527891] PCI-DMA: Disabling AGP.
[ 0.528092] PCI-DMA: aperture base @ f8000000 size 65536 KB
[ 0.528155] init_memory_mapping: 00000000f8000000-00000000fc000000
[ 0.528220] 00f8000000 - 00fc000000 page 2M
[ 0.528228] PCI-DMA: using GART IOMMU.
[ 0.528285] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.531758] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.532224] audit: initializing netlink socket (disabled)
[ 0.532224] type=2000 audit(1362429406.532:1): initialized
[ 0.544998] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.544998] VFS: Disk quotas dquot_6.5.2
[ 0.544998] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.544998] msgmni has been set to 12101
[ 0.544998] alg: No test for stdrng (krng)
[ 0.544998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.544998] io scheduler noop registered
[ 0.544998] io scheduler deadline registered
[ 0.544998] io scheduler cfq registered (default)
[ 0.544998] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.544998] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.544998] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.544998] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.568037] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.616187] Linux agpgart interface v0.103
[ 0.616198] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.617747] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.617747] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.617747] mousedev: PS/2 mouse device common for all mice
[ 0.617747] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.617747] rtc0: alarms up to one day, 114 bytes nvram
[ 0.617747] cpuidle: using governor ladder
[ 0.617747] cpuidle: using governor menu
[ 0.624227] TCP cubic registered
[ 0.624319] NET: Registered protocol family 10
[ 0.624822] Mobile IPv6
[ 0.624877] NET: Registered protocol family 17
[ 0.624940] Registering the dns_resolver key type
[ 0.625047] PM: Hibernation image not present or could not be loaded.
[ 0.625047] registered taskstats version 1
[ 0.625047] rtc_cmos rtc_cmos: setting system clock to 2013-03-04 20:36:47 UTC (1362429407)
[ 0.625047] Initializing network drop monitor service
[ 0.628350] Freeing unused kernel memory: 576k freed
[ 0.628679] Write protecting the kernel read-only data: 6144k
[ 0.631355] Freeing unused kernel memory: 660k freed
[ 0.634395] Freeing unused kernel memory: 680k freed
[ 0.644581] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.645165] udevd[49]: starting version 175
[ 0.671176] usbcore: registered new interface driver usbfs
[ 0.671265] usbcore: registered new interface driver hub
[ 0.675137] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.675248] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 21
[ 0.675310] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.676719] forcedeth 0000:00:0a.0: open: Could not find a valid PHY
[ 0.676802] forcedeth: probe of 0000:00:0a.0 failed with error -12
[ 0.689086] SCSI subsystem initialized
[ 0.701051] usbcore: registered new device driver usb
[ 0.701610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.701713] ehci_hcd 0000:00:02.1: PCI->APIC IRQ transform: INT B -> IRQ 20
[ 0.701796] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.701799] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.701889] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.702015] ehci_hcd 0000:00:02.1: debug port 1
[ 0.702078] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.702093] ehci_hcd 0000:00:02.1: irq 20, io mem 0xf4105000
[ 0.703982] libata version 3.00 loaded.
[ 0.705773] firewire_ohci 0000:01:05.0: PCI->APIC IRQ transform: INT A -> IRQ 19
[ 0.712078] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.712170] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712235] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.712313] usb usb1: Product: EHCI Host Controller
[ 0.712373] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 0.712436] usb usb1: SerialNumber: 0000:00:02.1
[ 0.712640] hub 1-0:1.0: USB hub found
[ 0.712698] hub 1-0:1.0: 10 ports detected
[ 0.713046] sata_nv 0000:00:07.0: version 3.5
[ 0.713060] sata_nv 0000:00:07.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 0.713184] sata_nv 0000:00:07.0: setting latency timer to 64
[ 0.713461] scsi0 : sata_nv
[ 0.713614] scsi1 : sata_nv
[ 0.713721] ata1: SATA max UDMA/133 cmd 0x2850 ctl 0x2878 bmdma 0x2830 irq 23
[ 0.713789] ata2: SATA max UDMA/133 cmd 0x2858 ctl 0x287c bmdma 0x2838 irq 23
[ 0.713893] sata_nv 0000:00:08.0: PCI->APIC IRQ transform: INT A -> IRQ 22
[ 0.713999] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.714291] scsi2 : sata_nv
[ 0.714411] scsi3 : sata_nv
[ 0.714520] ata3: SATA max UDMA/133 cmd 0x2860 ctl 0x2880 bmdma 0x2840 irq 22
[ 0.714585] ata4: SATA max UDMA/133 cmd 0x2868 ctl 0x2884 bmdma 0x2848 irq 22
[ 0.714699] pata_amd 0000:00:06.0: version 0.4.1
[ 0.714739] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.715198] scsi4 : pata_amd
[ 0.715324] scsi5 : pata_amd
[ 0.715430] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2820 irq 14
[ 0.715495] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2828 irq 15
[ 0.724558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.724716] ohci_hcd 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 21
[ 0.724791] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.724794] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.724862] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.724954] ohci_hcd 0000:00:02.0: irq 21, io mem 0xf4100000
[ 0.760089] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 0.782055] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.782114] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.782187] usb usb2: Product: OHCI Host Controller
[ 0.782243] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 0.782300] usb usb2: SerialNumber: 0000:00:02.0
[ 0.782390] hub 2-0:1.0: USB hub found
[ 0.782390] hub 2-0:1.0: 10 ports detected
[ 0.892269] ata5.00: ATAPI: SONY CD-RW CRX320EE, RYK4, max UDMA/33
[ 0.892269] ata5: nv_mode_filter: 0x739f&0xfffff->0x739f, BIOS=0x0 (0x0) ACPI=0x0
[ 0.924205] ata5.00: configured for UDMA/33
[ 1.024112] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.024124] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.156082] usb 1-1: New USB device found, idVendor=0ace, idProduct=1215
[ 1.156141] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=0
[ 1.156224] usb 1-1: Product: USB2.0 WLAN
[ 1.156278] usb 1-1: Manufacturer: ZyDAS
[ 1.180085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.204093] ata1.00: ATA-7: WDC WD2500YS-01SHB1, 20.06C06, max UDMA/133
[ 1.204163] ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.212149] ata1.00: configured for UDMA/133
[ 1.212998] scsi 0:0:0:0: Direct-Access ATA WDC WD2500YS-01S 20.0 PQ: 0 ANSI: 5
[ 1.260186] firewire_core: created device fw0: GUID 00e08100002418b7, S400
[ 1.524100] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.836119] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.836234] scsi 4:0:0:0: CD-ROM SONY CD-RW CRX320EE RYK4 PQ: 0 ANSI: 5
[ 2.006763] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 2.007002] sd 0:0:0:0: [sda] Write Protect is off
[ 2.007059] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.007079] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.028136] sda: sda1 sda2 < sda5 >
[ 2.029626] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.029877] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.029978] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.033518] sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[ 2.033518] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.033518] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.437364] microcode: CPU0: family 15 not supported
[ 2.437736] microcode: CPU1: family 15 not supported
[ 2.437900] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 2.484875] PM: Starting manual resume from disk
[ 2.484875] PM: Hibernation image partition 8:5 present
[ 2.484875] PM: Looking for hibernation image.
[ 2.484875] PM: Image not found (code -22)
[ 2.484875] PM: Hibernation image not present or could not be loaded.
[ 2.564428] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.392499] udevd[304]: starting version 175
[ 5.034585] shpchp 0000:40:00.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 5.034585] shpchp 0000:40:00.0: Cannot reserve MMIO region
[ 5.034585] shpchp 0000:40:01.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 5.034585] shpchp 0000:40:01.0: Cannot reserve MMIO region
[ 5.034585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.161189] EDAC MC: Ver: 2.1.0
[ 5.172586] MCE: In-kernel MCE decoding enabled.
[ 5.188327] AMD64 EDAC driver v3.4.0
[ 5.188911] EDAC amd64: DRAM ECC enabled.
[ 5.188976] EDAC amd64: K8 revE or earlier detected (node 0).
[ 5.189079] EDAC amd64: CS0: Registered Double data rate SDRAM
[ 5.189142] EDAC amd64: CS2: Registered Double data rate SDRAM
[ 5.189205] EDAC amd64: CS3: Registered Double data rate SDRAM
[ 5.189307] EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2
[ 5.189385] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 5.287036] i2c i2c-0: nForce2 SMBus adapter at 0x2480
[ 5.287036] i2c i2c-1: nForce2 SMBus adapter at 0x24c0
[ 5.318349] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 5.483289] powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 285 (2 cpu cores) (version 2.20.00)
[ 5.483289] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 5.483289] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 5.495398] snd_intel8x0 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 20
[ 5.495398] snd_intel8x0 0000:00:04.0: setting latency timer to 64
[ 5.729301] cfg80211: Calling CRDA to update world regulatory domain
[ 5.884378] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[ 6.041338] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.041338] zd1211rw 1-1:1.0: phy0
[ 6.041338] usbcore: registered new interface driver zd1211rw
[ 6.504410] codec_ready: codec is not ready [0x700000]
[ 6.504502] snd_intel8x0: probe of 0000:00:04.0 failed with error -5
[ 6.608743] cfg80211: World regulatory domain updated:
[ 6.608776] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.608864] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.608944] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.609018] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.609093] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.609167] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.453626] Adding 8383484k swap on /dev/sda5. Priority:-1 extents:1 across:8383484k
[ 7.473691] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.660562] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.844764] loop: module loaded
[ 8.932557] usb 1-1: firmware: agent loaded zd1211/zd1211b_ub into memory
[ 8.940608] usb 1-1: firmware: agent loaded zd1211/zd1211b_uphr into memory
[ 8.972638] zd1211rw 1-1:1.0: firmware version 4725
[ 9.012575] zd1211rw 1-1:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--NS
[ 9.016720] cfg80211: Calling CRDA for country: DE
[ 9.021339] cfg80211: Regulatory domain changed to country: DE
[ 9.021407] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.021487] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9.021565] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9.021644] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9.021724] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 9.029849] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.180713] wlan0: authenticate with 00:14:6c:53:54:c8 (try 1)
[ 10.184650] wlan0: authenticated
[ 10.217437] wlan0: associate with 00:14:6c:53:54:c8 (try 1)
[ 10.220654] wlan0: RX AssocResp from 00:14:6c:53:54:c8 (capab=0x411 status=0 aid=2)
[ 10.220658] wlan0: associated
[ 10.221916] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 13.929978] Bluetooth: Core ver 2.16
[ 13.930071] NET: Registered protocol family 31
[ 13.930131] Bluetooth: HCI device and connection manager initialized
[ 13.930196] Bluetooth: HCI socket layer initialized
[ 13.930258] Bluetooth: L2CAP socket layer initialized
[ 13.930323] Bluetooth: SCO socket layer initialized
[ 13.987040] Bluetooth: RFCOMM TTY layer initialized
[ 13.987040] Bluetooth: RFCOMM socket layer initialized
[ 13.987040] Bluetooth: RFCOMM ver 1.11
[ 14.293242] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.293308] Bluetooth: BNEP filters: protocol multicast
[ 18.781747] mtrr: type mismatch for f0000000,200000 old: write-back new: write-combining
-------------- next part --------------
andrew at debian:~$ sudo lspci -tvnn
-+-[0000:40]-+-00.0-[41]--
| +-00.1 Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451]
| +-01.0-[42]--
| \-01.1 Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451]
\-[0000:00]-+-00.0 NVIDIA Corporation CK804 Memory Controller [10de:005e]
+-01.0 NVIDIA Corporation CK804 ISA Bridge [10de:0051]
+-01.1 NVIDIA Corporation CK804 SMBus [10de:0052]
+-02.0 NVIDIA Corporation CK804 USB Controller [10de:005a]
+-02.1 NVIDIA Corporation CK804 USB Controller [10de:005b]
+-04.0 NVIDIA Corporation CK804 AC'97 Audio Controller [10de:0059]
+-06.0 NVIDIA Corporation CK804 IDE [10de:0053]
+-07.0 NVIDIA Corporation CK804 Serial ATA Controller [10de:0054]
+-08.0 NVIDIA Corporation CK804 Serial ATA Controller [10de:0055]
+-09.0-[01]--+-04.0 S3 Inc. 86c375 [ViRGE/DX] or 86c385 [ViRGE/GX] [5333:8a01]
| \-05.0 Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023]
+-0a.0 NVIDIA Corporation CK804 Ethernet Controller [10de:0056]
+-0e.0-[02]--
+-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
+-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
+-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
\-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
More information about the coreboot
mailing list