[coreboot] Patch set updated for coreboot: a2b39a5 AMD SouthStation: Use SPD read code from F14 wrapper

Kimarie Hoot (kimarie.hoot@se-eng.com) gerrit at coreboot.org
Thu Mar 7 22:15:40 CET 2013


Kimarie Hoot (kimarie.hoot at se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2608

-gerrit

commit a2b39a5fcc33fbf9ba9e2373f465e1028767155a
Author: Kimarie Hoot <kimarie.hoot at se-eng.com>
Date:   Thu Mar 7 08:54:36 2013 -0700

    AMD SouthStation: Use SPD read code from F14 wrapper
    
    Changes:
     - Get rid of the south_station mainboard specific code and
       uses the platform generic function wrapper that was added
       in change http://review.coreboot.org/#/c/2497/
       AMD f14: Add SPD read functions to wrapper code
    
     - Move DIMM addresses into devicetree.cb
    
     - Add the ASF init that used to be in the SPD read code into
       mainboard_enable()
    
    Notes:
     - The DIMM reads only happen in romstage, so the function is not
       available in ramstage.  Point the read-SPD callback to a generic
       function in ramstage.
    
    Change-Id: If4291d25ea81bf375f55b64c07c223a847a211d0
    Signed-off-by: Kimarie Hoot <kimarie.hoot at se-eng.com>
---
 src/mainboard/amd/south_station/BiosCallOuts.c |   8 +-
 src/mainboard/amd/south_station/Makefile.inc   |   2 -
 src/mainboard/amd/south_station/devicetree.cb  |   7 ++
 src/mainboard/amd/south_station/dimmSpd.c      | 167 -------------------------
 src/mainboard/amd/south_station/dimmSpd.h      |  63 ----------
 src/mainboard/amd/south_station/mainboard.c    |  10 ++
 6 files changed, 23 insertions(+), 234 deletions(-)

diff --git a/src/mainboard/amd/south_station/BiosCallOuts.c b/src/mainboard/amd/south_station/BiosCallOuts.c
index 6059549..2aca184 100644
--- a/src/mainboard/amd/south_station/BiosCallOuts.c
+++ b/src/mainboard/amd/south_station/BiosCallOuts.c
@@ -19,10 +19,10 @@
 
 #include "agesawrapper.h"
 #include "amdlib.h"
-#include "dimmSpd.h"
 #include "BiosCallOuts.h"
 #include "heapManager.h"
 #include "SB800.h"
+#include <northbridge/amd/agesa/family14/dimmSpd.h>
 
 STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] =
 {
@@ -424,7 +424,11 @@ AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
 AGESA_STATUS BiosReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
 {
   AGESA_STATUS Status;
-  Status = AmdMemoryReadSPD (Func, Data, (AGESA_READ_SPD_PARAMS *)ConfigPtr);
+#ifdef __PRE_RAM__
+  Status = agesa_ReadSPD (Func, Data, ConfigPtr);
+#else
+  Status = AGESA_UNSUPPORTED;
+#endif
 
   return Status;
 }
diff --git a/src/mainboard/amd/south_station/Makefile.inc b/src/mainboard/amd/south_station/Makefile.inc
index 50f9447..59c6cd0 100644
--- a/src/mainboard/amd/south_station/Makefile.inc
+++ b/src/mainboard/amd/south_station/Makefile.inc
@@ -19,13 +19,11 @@
 
 romstage-y += buildOpts.c
 romstage-y += agesawrapper.c
-romstage-y += dimmSpd.c
 romstage-y += BiosCallOuts.c
 romstage-y += PlatformGnbPcie.c
 
 ramstage-y += buildOpts.c
 ramstage-y += agesawrapper.c
-ramstage-y += dimmSpd.c
 ramstage-y += BiosCallOuts.c
 ramstage-y += PlatformGnbPcie.c
 
diff --git a/src/mainboard/amd/south_station/devicetree.cb b/src/mainboard/amd/south_station/devicetree.cb
index 883166c..60335d7 100644
--- a/src/mainboard/amd/south_station/devicetree.cb
+++ b/src/mainboard/amd/south_station/devicetree.cb
@@ -99,6 +99,13 @@ chip northbridge/amd/agesa/family14/root_complex
                         device pci 18.3 on end
                         device pci 18.4 on end
                         device pci 18.5 on end
+
+                        register "spdAddrLookup" = "
+                        {
+                            { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
+                            { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
+                        }"
+
                 end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex
         end #domain
 end #northbridge/amd/agesa/family14/root_complex
diff --git a/src/mainboard/amd/south_station/dimmSpd.c b/src/mainboard/amd/south_station/dimmSpd.c
deleted file mode 100644
index e1586b0..0000000
--- a/src/mainboard/amd/south_station/dimmSpd.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "Porting.h"
-#include "AGESA.h"
-#include "amdlib.h"
-#include "OEM.h" /* SMBUS0_BASE_ADDRESS */
-
-AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info);
-#define DIMENSION(array)(sizeof (array)/ sizeof (array [0]))
-
-/*#pragma optimize ("", off) // for source level debug
-*---------------------------------------------------------------------------
-*
-* SPD address table - porting required
-*/
-
-static const UINT8 spdAddressLookup [2] [2] [4] =  // socket, channel, dimm
-   {
-   // socket 0
-      {
-         {0xA0, 0xA2},  // channel 0 dimms
-         {0x00, 0x00},  // channel 1 dimms
-      },
-   // socket 1
-      {
-         {0x00, 0x00},  // channel 0 dimms
-         {0x00, 0x00},  // channel 1 dimms
-      },
-   };
-
-/*-----------------------------------------------------------------------------
- *
- * readSmbusByteData - read a single SPD byte from any offset
- */
-
-static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
-   {
-   unsigned int status;
-   UINT64 limit;
-
-   address |= 1; // set read bit
-
-   __outbyte (iobase + 0, 0xFF);                // clear error status
-   __outbyte (iobase + 1, 0x1F);                // clear error status
-   __outbyte (iobase + 3, offset);              // offset in eeprom
-   __outbyte (iobase + 4, address);             // slave address and read bit
-   __outbyte (iobase + 2, 0x48);                // read byte command
-
-   // time limit to avoid hanging for unexpected error status (should never happen)
-   limit = __rdtsc () + 2000000000 / 10;
-   for (;;)
-      {
-      status = __inbyte (iobase);
-      if (__rdtsc () > limit) break;
-      if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
-      if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
-      break;
-      }
-
-   buffer [0] = __inbyte (iobase + 5);
-   if (status == 2) status = 0;                      // check for done with no errors
-   return status;
-   }
-
-/*-----------------------------------------------------------------------------
- *
- * readSmbusByte - read a single SPD byte from the default offset
- *                 this function is faster function readSmbusByteData
- */
-
-static int readSmbusByte (int iobase, int address, char *buffer)
-   {
-   unsigned int status;
-   UINT64 limit;
-
-   __outbyte (iobase + 0, 0xFF);                // clear error status
-   __outbyte (iobase + 2, 0x44);                // read command
-
-   // time limit to avoid hanging for unexpected error status
-   limit = __rdtsc () + 2000000000 / 10;
-   for (;;)
-      {
-      status = __inbyte (iobase);
-      if (__rdtsc () > limit) break;
-      if ((status & 2) == 0) continue;               // SMBusInterrupt not set, keep waiting
-      if ((status & 1) == 1) continue;               // HostBusy set, keep waiting
-      break;
-      }
-
-   buffer [0] = __inbyte (iobase + 5);
-   if (status == 2) status = 0;                      // check for done with no errors
-   return status;
-   }
-
-/*---------------------------------------------------------------------------
- *
- * readspd - Read one or more SPD bytes from a DIMM.
- *           Start with offset zero and read sequentially.
- *           Optimization relies on autoincrement to avoid
- *           sending offset for every byte.
- *          Reads 128 bytes in 7-8 ms at 400 KHz.
- */
-
-static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
-   {
-   int index, error;
-
-   /* read the first byte using offset zero */
-   error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
-   if (error) return error;
-
-   /* read the remaining bytes using auto-increment for speed */
-   for (index = 1; index < count; index++)
-      {
-      error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]);
-      if (error) return error;
-      }
-
-   return 0;
-   }
-
-static void writePmReg (int reg, int data)
-   {
-   __outbyte (0xCD6, reg);
-   __outbyte (0xCD7, data);
-   }
-
-static void setupFch (int ioBase)
-   {
-   writePmReg (0x2D, ioBase >> 8);
-   writePmReg (0x2C, ioBase | 1);
-   writePmReg (0x29, 0x80);
-   writePmReg (0x28, 0x61);
-   __outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
-   }
-
-AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info)
-   {
-   int spdAddress, ioBase;
-
-   if (info->SocketId     >= DIMENSION (spdAddressLookup      )) return AGESA_ERROR;
-   if (info->MemChannelId >= DIMENSION (spdAddressLookup[0]   )) return AGESA_ERROR;
-   if (info->DimmId       >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR;
-
-   spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId];
-   if (spdAddress == 0) return AGESA_ERROR;
-   ioBase = SMBUS0_BASE_ADDRESS;
-   setupFch (ioBase);
-   return readspd (ioBase, spdAddress, (void *) info->Buffer, 128);
-   }
diff --git a/src/mainboard/amd/south_station/dimmSpd.h b/src/mainboard/amd/south_station/dimmSpd.h
deleted file mode 100644
index 81ab02e..0000000
--- a/src/mainboard/amd/south_station/dimmSpd.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/*----------------------------------------------------------------------------------------
- *                             M O D U L E S    U S E D
- *----------------------------------------------------------------------------------------
- */
-
-#ifndef _DIMMSPD_H_
-#define _DIMMSPD_H_
-
-#include "Porting.h"
-#include "AGESA.h"
-
-/*----------------------------------------------------------------------------------------
- *                   D E F I N I T I O N S    A N D    M A C R O S
- *----------------------------------------------------------------------------------------
- */
-
-/*----------------------------------------------------------------------------------------
- *                  T Y P E D E F S     A N D     S T R U C T U  R E S
- *----------------------------------------------------------------------------------------
- */
-
-/*----------------------------------------------------------------------------------------
- *           P R O T O T Y P E S     O F     L O C A L     F U  N C T I O N S
- *----------------------------------------------------------------------------------------
- */
-
-/*----------------------------------------------------------------------------------------
- *                          E X P O R T E D    F U N C T I O N S
- *----------------------------------------------------------------------------------------
- */
-
-AGESA_STATUS
-AmdMemoryReadSPD (
-  IN UINT32 Func,
-  IN UINT32 Data,
-  IN OUT AGESA_READ_SPD_PARAMS *SpdData
-  );
-
-/*---------------------------------------------------------------------------------------
- *                          L O C A L    F U N C T I O N S
- *---------------------------------------------------------------------------------------
- */
-
-#endif
diff --git a/src/mainboard/amd/south_station/mainboard.c b/src/mainboard/amd/south_station/mainboard.c
index 83b4b38..104492e 100644
--- a/src/mainboard/amd/south_station/mainboard.c
+++ b/src/mainboard/amd/south_station/mainboard.c
@@ -22,6 +22,7 @@
 #include <device/pci.h>
 #include <arch/io.h>
 #include <cpu/x86/msr.h>
+#include <southbridge/amd/sb800/sb800.h>
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
 #include <delay.h>
@@ -80,6 +81,15 @@ static void mainboard_enable(device_t dev)
 {
 	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
 	southstation_led_init();
+
+	/*
+	 * Initialize ASF registers to an arbitrary address because someone
+	 * long ago set things up this way inside the SPD read code.  The
+	 * SPD read code has been made generic and moved out of the persimmon
+	 * directory, so the ASF init is being done here.
+	 */
+	pm_iowrite(0x29, 0x80);
+	pm_iowrite(0x28, 0x61);
 }
 
 struct chip_operations mainboard_ops = {



More information about the coreboot mailing list