[coreboot] New patch to review for coreboot: 3e8a7bb AMD DSDT: Add secondary bus range to PCI0
Mike Loptien (mike.loptien@se-eng.com)
gerrit at coreboot.org
Fri Mar 15 18:08:43 CET 2013
Mike Loptien (mike.loptien at se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2735
-gerrit
commit 3e8a7bb57eb8a3096a35a46dcceded75bb61a853
Author: Mike Loptien <mike.loptien at se-eng.com>
Date: Fri Mar 15 10:53:40 2013 -0600
AMD DSDT: Add secondary bus range to PCI0
Adding the 'WordBusNumber' macro to the PCI0
CRES ResourceTemplate in the Persimmon DSDT.
This sets up the bus number for the PCI0 device
and the secondary bus number in the CRS method.
This change came in response to a 'dmesg' error
which states:
'[FIRMWARE BUG]: ACPI: no secondary bus range in _CRS'
By adding the 'WordBusNumber' macro, ACPI can set
up a valid range for the PCIe downstream busses,
thereby relieving the Linux kernel from "guessing"
the valid range based off _BBN or assuming [0-0xFF].
The Linux kernel code that checks this bus range is
in `drivers/acpi/pci_root.c`. PCI busses can have
up to 256 secondary busses connected to them via
a PCI-PCI bridge. However, these busses do not
have to be sequentially numbered, so leaving out a
section of the range (eg. allowing [0-0x7F]) will
unnecessarily restrict the downstream busses.
This is the same change as made to Persimmon with
change-id I44f22:
http://review.coreboot.org/#/c/2592/
Change-Id: I9017a7619b3b17e0e95ad0fe46d0652499289b00
Signed-off-by: Mike Loptien <mike.loptien at se-eng.com>
---
src/mainboard/amd/inagua/dsdt.asl | 16 ++++++++++++++++
src/mainboard/amd/south_station/dsdt.asl | 16 ++++++++++++++++
src/mainboard/amd/union_station/dsdt.asl | 16 ++++++++++++++++
3 files changed, 48 insertions(+)
diff --git a/src/mainboard/amd/inagua/dsdt.asl b/src/mainboard/amd/inagua/dsdt.asl
index 582ab7f..148d7b0 100644
--- a/src/mainboard/amd/inagua/dsdt.asl
+++ b/src/mainboard/amd/inagua/dsdt.asl
@@ -1477,6 +1477,22 @@ DefinitionBlock (
} /* end Ac97modem */
Name(CRES, ResourceTemplate() {
+ /* Set the Bus number and Secondary Bus number for the PCI0 device
+ * The Secondary bus range for PCI0 lets the system
+ * know what bus values are allowed on the downstream
+ * side of this PCI bus if there is a PCI-PCI bridge.
+ * PCI busses can have 256 secondary busses which
+ * range from [0-0xFF] but they do not need to be
+ * sequential.
+ */
+ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+ 0x0000, /* address granularity */
+ 0x0000, /* range minimum */
+ 0x00FF, /* range maximum */
+ 0x0000, /* translation */
+ 0x0100, /* length */
+ ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */
+
IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
diff --git a/src/mainboard/amd/south_station/dsdt.asl b/src/mainboard/amd/south_station/dsdt.asl
index 582ab7f..148d7b0 100644
--- a/src/mainboard/amd/south_station/dsdt.asl
+++ b/src/mainboard/amd/south_station/dsdt.asl
@@ -1477,6 +1477,22 @@ DefinitionBlock (
} /* end Ac97modem */
Name(CRES, ResourceTemplate() {
+ /* Set the Bus number and Secondary Bus number for the PCI0 device
+ * The Secondary bus range for PCI0 lets the system
+ * know what bus values are allowed on the downstream
+ * side of this PCI bus if there is a PCI-PCI bridge.
+ * PCI busses can have 256 secondary busses which
+ * range from [0-0xFF] but they do not need to be
+ * sequential.
+ */
+ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+ 0x0000, /* address granularity */
+ 0x0000, /* range minimum */
+ 0x00FF, /* range maximum */
+ 0x0000, /* translation */
+ 0x0100, /* length */
+ ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */
+
IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
diff --git a/src/mainboard/amd/union_station/dsdt.asl b/src/mainboard/amd/union_station/dsdt.asl
index da6f266..1d2435c 100644
--- a/src/mainboard/amd/union_station/dsdt.asl
+++ b/src/mainboard/amd/union_station/dsdt.asl
@@ -1478,6 +1478,22 @@ DefinitionBlock (
} /* end Ac97modem */
Name(CRES, ResourceTemplate() {
+ /* Set the Bus number and Secondary Bus number for the PCI0 device
+ * The Secondary bus range for PCI0 lets the system
+ * know what bus values are allowed on the downstream
+ * side of this PCI bus if there is a PCI-PCI bridge.
+ * PCI busses can have 256 secondary busses which
+ * range from [0-0xFF] but they do not need to be
+ * sequential.
+ */
+ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+ 0x0000, /* address granularity */
+ 0x0000, /* range minimum */
+ 0x00FF, /* range maximum */
+ 0x0000, /* translation */
+ 0x0100, /* length */
+ ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */
+
IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
More information about the coreboot
mailing list