[coreboot] Can the LiPPERT Cool RoadRunner-LX image be used for Gene 5315 Rev.B?

Christian Gmeiner christian.gmeiner at gmail.com
Thu Mar 28 09:00:57 CET 2013


2013/3/28 sergey <serg99666 at mail.ru>:
>
>     Hello everybody,
>
>     Dear Paul wrote:
>> Could you please provide an URL for this board and the information
>>listed in the FAQ »Will coreboot work on my machine?« [2].
>
> 1.  Board vendor: AAEON
>      Board name: Gene5315 Rev.B
>      CPU: AMD Geode LX 800
>      Northbridge: AMD Geode™ LX
>      Southbridge:  AMD Geode™ CS5536
>      ROM chip package: PLCC
>

looks like a normal LX800 device... should be doable to support without much
time needed.

> 2. Output of "lspci -tvnn":
>
>    k2000 at k2000-desktop:~$ lspci -tvnn
>    -[0000:00]-+-01.0  Advanced Micro Devices [AMD] CS5536 [Geode companion]
> Host Bridge [1022:2080]
>            +-01.1  Advanced Micro Devices [AMD] Geode LX Video [1022:2081]
>            +-01.2  Advanced Micro Devices [AMD] Geode LX AES Security Block
> [1022:2082]
>            +-06.0  Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
> [10ec:8139]
>            +-09.0  Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
> [10ec:8139]
>            +-0f.0  Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA
> [1022:2090]
>            +-0f.2  Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE
> [1022:209a]
>            +-0f.3  Advanced Micro Devices [AMD] CS5536 [Geode companion]
> Audio [1022:2093]
>            +-0f.4  Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC
> [1022:2094]
>            \-0f.5  Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC
> [1022:2095]
>    k2000 at k2000-desktop:~$
>
> 3. Super I/O:   ITE IT8712F
>
> 4. Output of "flashrom -V":
>
>
>     k2000 at k2000-desktop:~$ flashrom -V
>     flashrom v0.9.6.1-r1564 on Linux 2.6.32-38-generic (i586)
>     flashrom is free software, get the source code at
> http://www.flashrom.org
>
>    flashrom was built with libpci 3.0.0, GCC 4.4.3, little endian
>    Command line (1 args): flashrom -V
>    Please select a programmer with the --programmer parameter.
>    Valid choices are:
>    internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii,
> serprog,
>    buspirate_spi, rayer_spi, pony_spi, nicintel, nicintel_spi, ogp_spi,
> satamv,
>    linux_spi
>    k2000 at k2000-desktop:~$
>

try to use this and post the output

flashrom --programmer internal -V


> 5.  URL for board Gene5315 Rev.B [1].
>
>     Dear Paul wrote:
>  >You should try it. Just make sure you have a way to recover from a
>  >failed flash, when it does not work as also documented in the FAQ [4].
>
> I tryed to record coreboot in bios chip.  Coreboot could not to run system.
>

Does this mean you can recover from a bad coreboot rom?

greets
--
Christian Gmeiner, MSc



More information about the coreboot mailing list