[coreboot] Change in coreboot[master]: dmp/vortex86ex: Initialize I2C controller base address/IRQ

[Rudolf Marek]

Hi,

If Andrew wants to use the fixed address it is better to marked the fixed IO 
address in the I/O allocator as used. Like in VIA vt8237 for ACPI IO base:

static void vt8237r_read_resources(device_t dev)
{
         struct resource *res;

         pci_dev_read_resources(dev);

         /* Fixed ACPI Base IO Base*/
         res = new_resource(dev, 0x88);
         res->base = VT8237R_ACPI_IO_BASE;
         res->size = 128;
         res->limit = 0xffffUL;
         res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_RESERVE |
                      IORESOURCE_STORED | IORESOURCE_ASSIGNED;
}

But I see this dmp southbrige bypassed the I/O allocator by reserving it whole 
for southbridge.

If no PCI or I/O devices will ever connect this is probably OK, although I would 
prefer to use above construct to add "fixed" I/O resources.

I did not have time to study the code/chipset in the detail, if someone can 
check that it would be great.

Thanks
Rudolf