[coreboot] Freescale i.MX6
christian.gmeiner at gmail.com
Fri Sep 20 15:16:18 CEST 2013
2013/9/20 <default at rlf.de>:
> On Fri, 20 Sep 2013 12:53:07 +0200
> Christian Gmeiner <christian.gmeiner at gmail.com> wrote:
> Hi Guys.
>> > thank you for your quick response.
>> > If there is actually no active effort to support i.MX6, I’m
> interested in
>> > leading that project.
>> > But I cannot start before the end of the year because I have to wait
> for our
>> > hardware and to bring-up the board first with u-boot.
>> I think that I could spend 2-3 days to look into initial support for
>> the I.MX6 during the
>> next 2-3 weeks.
> well I can give you a git-link for an U-Boot already running and
> kicking on i.MX6 (D&Q), it's DT/FDT capable.
> If you want to cut this short.
u-boot... I am using mainline u-boot.git for a custom I.MX6D board..
>> > Another point is to think about hardware donation.
>> I have access to some I.MX6D and one I.MX6Q boards.. also I own a ARM
>> jtag. So I have
>> all I need :)
> I also have access to i.MX6D/Q boards, no JTAG/OLIMEX though.
Christian Gmeiner, MSc
More information about the coreboot