<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=ks_c_5601-1987">
<META content="MSHTML 6.00.2722.900" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>Dear linuxbios.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Hello.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>I've worked for development of Embedded linux project in my
corp.</FONT></DIV>
<DIV><FONT size=2>Following is decription of my projcet.</FONT></DIV>
<DIV><FONT size=2>CPU : VIA C3 800Mhz (EBGA)</FONT></DIV>
<DIV><FONT size=2>Reference Board : VT6015</FONT></DIV>
<DIV><FONT size=2>Northbridge : VT8606 (include S3 twister video
core)</FONT></DIV>
<DIV><FONT size=2>Southbridge : VT8231 (include VIA rhine II LAN
core)</FONT></DIV>
<DIV><FONT size=2>Bootbios : Linuxbios</FONT></DIV>
<DIV><FONT size=2>OS : linux 2.4.19 (</FONT><FONT size=2> ramdisk include
glibc 2.3.1, busybox 0.60.5 and tinylogin 1.2 )</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Now, It works well except hard disk.</FONT></DIV>
<DIV><FONT size=2>I try to boot the kernel in two way.</FONT></DIV>
<DIV><FONT size=2>First, it loads compressed kernel and ramdisk image via
network using tftp protocol.</FONT></DIV>
<DIV><FONT size=2>Second, it loads elfImage, generated by 'mkelfImage' via
network.</FONT></DIV>
<DIV><FONT size=2>All of them work great. (It means that I can see the prompt '\
'.)</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>But, when I try to make a file system the
harddisk, 'segmentation fault' occurs.</FONT></DIV>
<DIV><FONT size=2>mke2fs and mkreiserfs have same problem.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>For find out the cause, I try to make a file system in
various method.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>1. Buildin Bios + Redhat 8.0 installed harddisk + test
harddisk</FONT></DIV>
<DIV><FONT size=2>2. Linuxbios + Redhat 8.0 installed harddisk + test
harddisk</FONT></DIV>
<DIV><FONT size=2>3. Linuxbios + Kernel(newly compiled), own ramdisk + test
harddisk</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>After boot, I try to make a file system on test
harddisk.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>In case 1, It works well. Of course, it must
be.</FONT></DIV>
<DIV><FONT size=2>In case 2 and 3, I meet the segmentation fault.</FONT></DIV>
<DIV><FONT size=2>So, I think that this problem caused in
Linuxbios.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Maybe, this problem caused by harddisk initialization in
linuxbios.</FONT></DIV>
<DIV><FONT size=2>But, there are no harddisk initialization code in
linuxbios.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Cound you help me?</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Thanks for reading.</FONT></DIV>
<DIV><FONT size=2>Regards,</FONT></DIV>
<DIV><FONT size=2>malas</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>PS. In addition, memtest86 v3.0 works well without
error.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Follwing is boot messages.</FONT></DIV>
<DIV><FONT
size=2>--------------------------------------------------------------------------</FONT></DIV>
<DIV><FONT size=2>PDVR_Hx> tftp 01000000 linux.img ==> my own
boot bios prompt like PPCboot<BR>PCI: Enabling bus mastering for device
00:90<BR>rhine.c v1.0.0 2000-01-07<BR>IO address 1400 Ethernet Address:
00:02:f1:80:21:00<BR>Analyzing Media type,this will take several
seconds........OK<BR>MII Addr. : 0x01<BR>PHYID1 : 0x0101, PHYID2 :
0x8f25<BR>Control : 0x3100, Status : 0x786d<BR>Auto-Nego. Adv. : 0x05e1, Link
Partner Adv. : 0x41e1<BR>Linespeed : 100Mbs, Full-duplex<BR># ServerIP =
192.168.0.41<BR># ServerMAC = 00:50:fc:3a:46:cd<BR># TFTP Ready : blocksize/dot
= 1432 bytes<BR># Loading
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
.....<BR># TFTP Complete : 0x0010e0b0 bytes at address
0x01000000.<BR>PDVR_Hx> tftp 02000000 ramdisk.img<BR># ServerIP =
192.168.0.41<BR># ServerMAC = 00:50:fc:3a:46:cd<BR># TFTP Ready : blocksize/dot
= 1432 bytes<BR># Loading
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
................................................................<BR>
........<BR># TFTP Complete : 0x0010f196 bytes at address
0x02000000.<BR>PDVR_Hx> boot 01000000 02000000<BR># Checking Image at
0x01000000.<BR># Image Name: PDVR-H8 Kernel Image<BR> Image
Type: Intel x86 Linux Kernel Image (gzip compressed)<BR> Data
Size: 1106032 Bytes = 1080 kB = 1 MB<BR> Load Address:
00100000<BR> Entry Point: 00100000<BR># Verifying Checksum ...
OK<BR># Uncompressing kernel image...<BR># Checking Image at 0x02000000.<BR>#
Image Name: PDVR Ramdisk Image<BR> Image Type:
Intel x86 Linux RAMDisk Image (gzip compressed)<BR> Data
Size: 1110358 Bytes = 1084 kB = 1 MB<BR> Load Address:
01000000<BR> Entry Point: 01000000<BR># Verifying Checksum ...
OK<BR># command line - [root=/dev/ram console=ttyS0,115200n8 reboot=b]<BR># boot
kernel<BR>rhine disable ==> turn off the network device to
do not receive packet during boot kernel<BR>Linux version 2.4.19-linuxbios_4 (<A
href="mailto:malas@******">malas@******</A>) (gcc version 3.2) #62 Fri Nov 22
11:34:28 KST 2002</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>BIOS-provided physical RAM map:</FONT></DIV>
<DIV><FONT size=2> BIOS-e820: 0000000000000000 - 00000000000a0000
(usable)</FONT></DIV>
<DIV><FONT size=2> BIOS-e820: 00000000000a0000 - 0000000000100000
(reserved)</FONT></DIV>
<DIV><FONT size=2> BIOS-e820: 0000000000100000 - 0000000007800000
(usable)</FONT></DIV>
<DIV><FONT size=2> BIOS-e820: 00000000fffc0000 - 0000000100000000
(reserved)</FONT></DIV>
<DIV><FONT size=2>120MB LOWMEM available.</FONT></DIV>
<DIV><FONT size=2>On node 0 totalpages: 30720</FONT></DIV>
<DIV><FONT size=2>zone(0): 4096 pages.</FONT></DIV>
<DIV><FONT size=2>zone(1): 26624 pages.</FONT></DIV>
<DIV><FONT size=2>zone(2): 0 pages.</FONT></DIV>
<DIV><FONT size=2>Kernel command line: root=/dev/ram console=ttyS0,115200n8
reboot=b</FONT></DIV>
<DIV><FONT size=2>Initializing CPU#0</FONT></DIV>
<DIV><FONT size=2>Detected 800.047 MHz processor.</FONT></DIV>
<DIV><FONT size=2>Calibrating delay loop... 1595.80 BogoMIPS</FONT></DIV>
<DIV><FONT size=2>Memory: 117456k/122880k available (1244k kernel code, 5040k
reserved, 839k data, 224k init, 0k highmem)</FONT></DIV>
<DIV><FONT size=2>Checking if this processor honours the WP bit even in
supervisor mode... Ok.</FONT></DIV>
<DIV><FONT size=2>kdb version 2.3 by Scott Lurndal, Keith Owens. Copyright SGI,
All Rights Reserved</FONT></DIV>
<DIV><FONT size=2>Dentry cache hash table entries: 16384 (order: 5, 131072
bytes)</FONT></DIV>
<DIV><FONT size=2>Inode cache hash table entries: 8192 (order: 4, 65536
bytes)</FONT></DIV>
<DIV><FONT size=2>Mount-cache hash table entries: 2048 (order: 2, 16384
bytes)</FONT></DIV>
<DIV><FONT size=2>Buffer-cache hash table entries: 4096 (order: 2, 16384
bytes)</FONT></DIV>
<DIV><FONT size=2>Page-cache hash table entries: 32768 (order: 5, 131072
bytes)</FONT></DIV>
<DIV><FONT size=2>CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32
bytes/line)</FONT></DIV>
<DIV><FONT size=2>CPU: L2 Cache: 64K (32 bytes/line)</FONT></DIV>
<DIV><FONT size=2>CPU: Centaur VIA Ezra stepping 08</FONT></DIV>
<DIV><FONT size=2>Checking 'hlt' instruction... OK.</FONT></DIV>
<DIV><FONT size=2>POSIX conformance testing by UNIFIX</FONT></DIV>
<DIV><FONT size=2>mtrr: v1.40 (20010327) Richard Gooch (<A
href="mailto:rgooch@atnf.csiro.au">rgooch@atnf.csiro.au</A>)</FONT></DIV>
<DIV><FONT size=2>mtrr: detected mtrr type: Intel</FONT></DIV>
<DIV><FONT size=2>PCI: Using configuration type 1</FONT></DIV>
<DIV><FONT size=2>PCI: Probing PCI hardware</FONT></DIV>
<DIV><FONT size=2>Unknown bridge resource 0: assuming transparent</FONT></DIV>
<DIV><FONT size=2>PCI: Using IRQ router VIA [1106/8231] at 00:11.0</FONT></DIV>
<DIV><FONT size=2>PCI: Found IRQ 6 for device 00:12.0</FONT></DIV>
<DIV><FONT size=2>PCI: Found IRQ 7 for device 01:00.0</FONT></DIV>
<DIV><FONT size=2>Linux NET4.0 for Linux 2.4</FONT></DIV>
<DIV><FONT size=2>Based upon Swansea University Computer Society
NET3.039</FONT></DIV>
<DIV><FONT size=2>Initializing RT netlink socket</FONT></DIV>
<DIV><FONT size=2>Starting kswapd</FONT></DIV>
<DIV><FONT size=2>Journalled Block Device driver loaded</FONT></DIV>
<DIV><FONT size=2>Serial driver version 5.05c (2001-07-08) with MANY_PORTS
SHARE_IRQ SERIAL_PCI enabled</FONT></DIV>
<DIV><FONT size=2>ttyS00 at 0x03f8 (irq = 4) is a 16550A</FONT></DIV>
<DIV><FONT size=2>Real Time Clock Driver v1.10e</FONT></DIV>
<DIV><FONT size=2>Non-volatile memory driver v1.1</FONT></DIV>
<DIV><FONT size=2>Uniform Multi-Platform E-IDE driver Revision:
6.31</FONT></DIV>
<DIV><FONT size=2>ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx</FONT></DIV>
<DIV><FONT size=2>VP_IDE: IDE controller on PCI bus 00 dev 89</FONT></DIV>
<DIV><FONT size=2>VP_IDE: chipset revision 6</FONT></DIV>
<DIV><FONT size=2>VP_IDE: not 100% native mode: will probe irqs
later</FONT></DIV>
<DIV><FONT size=2>ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx</FONT></DIV>
<DIV><FONT size=2>VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on
pci00:11.1</FONT></DIV>
<DIV><FONT size=2> ide0: BM-DMA at 0x1820-0x1827, BIOS
settings: hda:pio, hdb:pio</FONT></DIV>
<DIV><FONT size=2> ide1: BM-DMA at 0x1828-0x182f, BIOS
settings: hdc:pio, hdd:pio</FONT></DIV>
<DIV><FONT size=2>hda: ST380020A, ATA DISK drive</FONT></DIV>
<DIV><FONT size=2>hdb: IBM-DTLA-305040, ATA DISK drive</FONT></DIV>
<DIV><FONT size=2>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14</FONT></DIV>
<DIV><FONT size=2>hda: 156301488 sectors (80026 MB) w/2048KiB Cache,
CHS=155061/16/63, UDMA(100)</FONT></DIV>
<DIV><FONT size=2>hdb: 80418240 sectors (41174 MB) w/380KiB Cache,
CHS=79780/16/63, UDMA(100)</FONT></DIV>
<DIV><FONT size=2>Partition check:</FONT></DIV>
<DIV><FONT size=2> hda: hda1</FONT></DIV>
<DIV><FONT size=2> hdb: hdb1</FONT></DIV>
<DIV><FONT size=2>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
blocksize</FONT></DIV>
<DIV><FONT size=2>loop: loaded (max 8 devices)</FONT></DIV>
<DIV><FONT size=2>VIA Rhine Farmily Fast Ethernet Adapter Driver Ver.
4.11</FONT></DIV>
<DIV><FONT size=2>Copyright (c) 2002 VIA Technologies, Inc.</FONT></DIV>
<DIV><FONT size=2>PCI: Found IRQ 6 for device 00:12.0</FONT></DIV>
<DIV><FONT size=2>eth0: VIA VT6102 Rhine II Fast Ethernet
Adapter
</FONT></DIV>
<DIV><FONT size=2>eth0: MAC=00:02:F1:80:21:00 IO=0x1400 Mem=0xc8000000
IRQ=6 </FONT></DIV>
<DIV><FONT size=2>NET4: Linux TCP/IP 1.0 for NET4.0</FONT></DIV>
<DIV><FONT size=2>IP Protocols: ICMP, UDP, TCP, IGMP</FONT></DIV>
<DIV><FONT size=2>IP: routing cache hash table of 512 buckets,
4Kbytes</FONT></DIV>
<DIV><FONT size=2>TCP: Hash tables configured (established 8192 bind
16384)</FONT></DIV>
<DIV><FONT size=2>NET4: Unix domain sockets 1.0/SMP for Linux
NET4.0.</FONT></DIV>
<DIV><FONT size=2>RAMDISK: Compressed image found at block 0</FONT></DIV>
<DIV><FONT size=2>Freeing initrd memory: 1084k freed</FONT></DIV>
<DIV><FONT size=2>VFS: Mounted root (ext2 filesystem).</FONT></DIV>
<DIV><FONT size=2>Freeing unused kernel memory: 224k freed</FONT></DIV>
<DIV><FONT size=2>init started: BusyBox v0.60.5 (2002.11.14-08:59+0000)
multi-call
binary<BR>------------------------------------------------------------------------<BR>Mounting
local file systems: ok<BR>Starting system log daemon: ok<BR>setup
network<BR>setting loop back interface<BR>setting network interface<BR>eth0:
Link autonegation speed 100M bps full duplex</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>pdvr_802100 login: root</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV><FONT size=2>
<DIV><BR>BusyBox v0.60.5 (2002.11.21-06:43+0000) Built-in shell (ash)<BR>Enter
'help' for a list of built-in commands.</DIV>
<DIV> </DIV>
<DIV>Welcome to **********<BR>/ # sfdisk -l</DIV>
<DIV> </DIV>
<DIV>Disk /dev/hda: 155061 cylinders, 16 heads, 63 sectors/track<BR>Units =
cylinders of 516096 bytes, blocks of 1024 bytes, counting from 0</DIV>
<DIV> </DIV>
<DIV> Device Boot Start End
#cyls #blocks Id
System<BR>/dev/hda1 0+
155060 155061- 78150743+ 83
Linux<BR>/dev/hda2
0 -
0 0
0 Empty<BR>/dev/hda3
0 -
0 0
0 Empty<BR>/dev/hda4
0 -
0 0
0 Empty</DIV>
<DIV> </DIV>
<DIV>Disk /dev/hdb: 79780 cylinders, 16 heads, 63 sectors/track<BR>Units =
cylinders of 516096 bytes, blocks of 1024 bytes, counting from 0</DIV>
<DIV> </DIV>
<DIV> Device Boot Start End
#cyls #blocks Id
System<BR>/dev/hdb1
0+ 79779 79780- 40209119+ 83
Linux<BR>/dev/hdb2
0 -
0 0
0 Empty<BR>/dev/hdb3
0 -
0 0
0 Empty<BR>/dev/hdb4
0 -
0 0
0 Empty<BR>/ # mkfs.ext3 /dev/hda1<BR>mke2fs 1.32
(09-Nov-2002)<BR>ext2fs_check_if_mount: No such file or directory while
determining whether /dev/hda1 is mounted.<BR>Filesystem label=<BR>OS type:
Linux<BR>Block size=4096 (log=2)<BR>Fragment size=4096 (log=2)<BR>9781248
inodes, 19537685 blocks<BR>976884 blocks (5.00%) reserved for the super
user<BR>First data block=0<BR>597 block groups<BR>32768 blocks per group, 32768
fragments per group<BR>16384 inodes per group<BR>Superblock backups stored on
blocks: <BR>32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632,
2654208, <BR>4096000, 7962624, 11239424</DIV>
<DIV> </DIV>
<DIV>Writing inode tables: 0/597 1/597 2/597
3/597 4/597 5/597 6/597 7/597 8/597Unable to
handle kernel paging request at virtual address c58bc028</DIV>
<DIV> </DIV>
<DIV> printing eip:</DIV>
<DIV>c012c196</DIV>
<DIV>*pde = 00017063</DIV>
<DIV>*pte = 02a08f00</DIV>
<DIV>Oops: 0002</DIV>
<DIV>CPU: 0</DIV>
<DIV>EIP: 0010:[<c012c196>] Not
tainted</DIV>
<DIV>EFLAGS: 00010202</DIV>
<DIV>eax: c58bc0e0 ebx: 000000e0 ecx:
01000000 edx: c58bc020</DIV>
<DIV>esi: 00000020 edi: c125fdd4 ebp:
c58bc000 esp: c6ff1e3c</DIV>
<DIV>ds: 0018 es: 0018 ss: 0018</DIV>
<DIV>Process mkfs.ext3 (pid: 128, stackpage=c6ff1000)</DIV>
<DIV>Stack: 00000001 000000f0 c125fddc c125fdd4 00000246 000000f0 c012c9a2
c125fdd4 </DIV>
<DIV> 000000f0 00000000 00000c00 00000400
00000001 c012c2ff c125fdd4 000000f0 </DIV>
<DIV> c0135f44 c125fdd4 000000f0 c013601d
00000001 00000301 c12040a4 00001000 </DIV>
<DIV>Call Trace: [<c012c9a2>] [<c012c2ff>]
[<c0135f44>] [<c013601d>] [<c0136247>]</DIV>
<DIV> [<c01367da>] [<c0135c3f>] [<c0136ea1>]
[<c0139810>] [<c01398e9>] [<c0139810>]</DIV>
<DIV> [<c012923f>] [<c01295bf>] [<c01340d5>]
[<c0108ce3>]</DIV>
<DIV> </DIV>
<DIV>Code: 89 5a 08 c7 42 10 00 00 00 00 89 42 0c 89 d6 85 f6 0f 84 b0 </DIV>
<DIV> </DIV>
<DIV>Entering kdb (current=0xc6ff0000, pid 128) Oops: Oops</DIV>
<DIV>due to oops @ 0xc012c196</DIV>
<DIV>eax = 0xc58bc0e0 ebx = 0x000000e0 ecx = 0x01000000 edx = 0xc58bc020 </DIV>
<DIV>esi = 0x00000020 edi = 0xc125fdd4 esp = 0xc6ff1e3c eip = 0xc012c196 </DIV>
<DIV>ebp = 0xc58bc000 xss = 0x00000018 xcs = 0x00000010 eflags = 0x00010202
</DIV>
<DIV>xds = 0x00000018 xes = 0x00000018 origeax = 0xffffffff ®s =
0xc6ff1e08</DIV>
<DIV>kdb> go</DIV>
<DIV>Segmentation fault<BR>/ # </DIV>
<DIV>/ # mkreiserfs /dev/hdb1</DIV>
<DIV> </DIV>
<DIV><-------------mkreiserfs, 2002-------------><BR>reiserfsprogs
3.6.4</DIV>
<DIV> </DIV>
<DIV>mkreiserfs: Guessing about desired format.. <BR>mkreiserfs: Kernel
2.4.19-linuxbios_4 is running.<BR>Format 3.6 with standard journal<BR>Count of
blocks on the device: 10052279<BR>Number of blocks consumed by mkreiserfs
formatting process: 8518<BR>Blocksize: 4096<BR>Hash function used to sort names:
"r5"<BR>Journal Size 8193 blocks (first block 18)<BR>Journal Max transaction
length 1024<BR>inode generation number: 0<BR>UUID:
b6da3cd8-4519-46dc-a339-054a10774b88<BR>ATTENTION: YOU SHOULD REBOOT AFTER
FDISK!<BR>ALL DATA WILL BE LOST ON '/dev/hdb1'!<BR>Continue
(y/n):y<BR>Initializing journal - 0%....20%....40%....Unable to handle kernel
paging request at virtual address c58bc000</DIV>
<DIV> printing eip:</DIV>
<DIV>c0234ea4</DIV>
<DIV>*pde = 00017063</DIV>
<DIV>*pte = 02828f00</DIV>
<DIV>Oops: 0002</DIV>
<DIV>CPU: 0</DIV>
<DIV>EIP: 0010:[<c0234ea4>] Not
tainted</DIV>
<DIV>EFLAGS: 00010246</DIV>
<DIV>eax: 00000000 ebx: c58bc000 ecx:
00001000 edx: 00000000</DIV>
<DIV>esi: 0806ed38 edi: c58bc000 ebp:
c10152c8 esp: c6ff1f34</DIV>
<DIV>ds: 0018 es: 0018 ss: 0018</DIV>
<DIV>Process mkreiserfs (pid: 127, stackpage=c6ff1000)</DIV>
<DIV>Stack: 00000000 00001000 00001000 c1204078 00000000 00001000 00000000
00000000 </DIV>
<DIV> 012e4000 00000000 c1015220 00000000
00000001 0806ed38 c101528c c1015220 </DIV>
<DIV> c1285aa0 c01295bf c1285aa0 0806ed38
00001000 c1285ac0 0806ed38 c1285aa0 </DIV>
<DIV>Call Trace: [<c01295bf>] [<c01340d5>]
[<c0108ce3>]</DIV>
<DIV><BR>Code: f3 aa 58 59 e9 c0 43 ef ff b8 f2 ff ff ff 30 d2 e9 c8 78 ef
</DIV>
<DIV> </DIV>
<DIV>Entering kdb (current=0xc6ff0000, pid 127) Oops: Oops</DIV>
<DIV>due to oops @ 0xc0234ea4</DIV>
<DIV>eax = 0x00000000 ebx = 0xc58bc000 ecx = 0x00001000 edx = 0x00000000 </DIV>
<DIV>esi = 0x0806ed38 edi = 0xc58bc000 esp = 0xc6ff1f34 eip = 0xc0234ea4 </DIV>
<DIV>ebp = 0xc10152c8 xss = 0x00000018 xcs = 0x00000010 eflags = 0x00010246
</DIV>
<DIV>xds = 0x00000018 xes = 0x00000018 origeax = 0xffffffff ®s =
0xc6ff1f00</DIV>
<DIV>kdb> go
<DIV>Segmentation fault<BR>/ # </FONT></DIV></DIV>
<DIV><FONT size=2></FONT> </DIV></BODY></HTML>