Linux version 2.4.18epoll (root@localhost.localdomain) (gcc version 2.95.3 19993
BIOS-provided physical RAM map:
 BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e801: 0000000000100000 - 0000000001e00000 (usable)
On node 0 totalpages: 7680
zone(0): 4096 pages.
zone(1): 3584 pages.
zone(2): 0 pages.
Initializing CPU#0
Detected 233.865 MHz processor.
Calibrating delay loop... 466.94 BogoMIPS
Memory: 23188k/30720k available (841k kernel code, 7144k reserved, 201k data, 1)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: Geode by NSC Geode(TM) Integrated Processor by National Semi stepping 00
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: IDE base address fixup for 00:12.2
PCI: Scanning for ghost devices on bus 0
PCI: IRQ init
PCI: Interrupt Routing Table found at 0xc00f7690
00:10 slot=01 0:01/deb8 1:02/deb8 2:03/deb8 3:04/deb8
00:0f slot=02 0:03/deb8 1:04/deb8 2:01/deb8 3:02/deb8
00:11 slot=03 0:04/deb8 1:01/deb8 2:02/deb8 3:03/deb8
00:13 slot=00 0:01/deb8 1:00/deb8 2:00/deb8 3:00/deb8
PCI: Attempting to find IRQ router for 1078:0002
PCI: Using IRQ router NatSemi [1078/0100] at 00:12.0
PCI: IRQ fixup
IRQ for 00:0f.0:0 -> PIRQ 03, mask deb8, excl 8800 -> newirq=0 ... failed
IRQ for 00:13.0:0 -> PIRQ 01, mask deb8, excl 8800 -> newirq=0 ... failed
PCI: Allocating resources
PCI: Resource 00001000-000010ff (f=101, d=0, p=0)
PCI: Resource febfd000-febfd0ff (f=200, d=0, p=0)
PCI: Resource febfe000-febfe0ff (f=200, d=0, p=0)
PCI: Resource 00001400-0000147f (f=101, d=0, p=0)
PCI: Resource febff000-febff07f (f=200, d=0, p=0)
PCI: Resource febfb000-febfbfff (f=200, d=0, p=0)
PCI: Resource febfc000-febfcfff (f=200, d=0, p=0)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
pty: 256 Unix98 ptys configured
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ed
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsul.
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
PPP BSD Compression module registered
8139too Fast Ethernet driver 0.9.24
IRQ for 00:0f.0:0 -> PIRQ 03, mask deb8, excl 8800 -> newirq=11 -> assigning IRK
PCI: Assigned IRQ 11 for device 00:0f.0
eth0: RealTek RTL8139 Fast Ethernet at 0xc2800000, 00:e0:4c:83:04:e1, IRQ 11
usb.c: registered new driver hub
IRQ for 00:13.0:0 -> PIRQ 01, mask deb8, excl 8800 -> newirq=11 -> assigning IRK
PCI: Assigned IRQ 11 for device 00:13.0
usb-ohci.c: USB OHCI at membase 0xc2802000, IRQ 11
usb-ohci.c: usb-00:13.0, Compaq Computer Corporation USB Open Host Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usbnet
NET4: Linux TCP/IP 1.0 for NET4.0