<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-2022-kr">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2653.12">
<TITLE>RE: ADLO for EPIA </TITLE>
</HEAD>
<BODY>

<P><FONT SIZE=2>I tested ADLO on EPIA but it failed on the first try. </FONT>
</P>

<P><FONT SIZE=2>I grapped vgabios using your Makefile target and  modified loader.s to enable </FONT>
<BR><FONT SIZE=2>shadow ram control registers of EPIA. </FONT>
<BR><FONT SIZE=2>However,  it hang around post code 0x96 and nothing is shown on the CRT. </FONT>
</P>

<P><FONT SIZE=2>Do you have any idea what 0x96 post code means. </FONT>
<BR><FONT SIZE=2>Is it a bochs post code or vgabios postcode? </FONT>
</P>
<BR>

<P><FONT SIZE=2>> -----Original Message-----</FONT>
<BR><FONT SIZE=2>> From: Adam Sulmicki [<A HREF="mailto:adam@cfar.umd.edu">mailto:adam@cfar.umd.edu</A>]</FONT>
<BR><FONT SIZE=2>> Sent: Tuesday, March 11, 2003 4:13 AM</FONT>
<BR><FONT SIZE=2>> To: hcyun@etri.re.kr</FONT>
<BR><FONT SIZE=2>> Cc: linuxbios@clustermatic.org</FONT>
<BR><FONT SIZE=2>> Subject: Re: ADLO for EPIA </FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> > I'm trying to bring up VGA on EPIA board.</FONT>
<BR><FONT SIZE=2>> > >From the list, EPIA board is supported and I've tested </FONT>
<BR><FONT SIZE=2>> with Angrew's image.</FONT>
<BR><FONT SIZE=2>> > However, due to full support of VGA is necessary, I'm </FONT>
<BR><FONT SIZE=2>> trying to figure out</FONT>
<BR><FONT SIZE=2>> > ADLO to run binary only</FONT>
<BR><FONT SIZE=2>> > VGABIOS rom image.</FONT>
<BR><FONT SIZE=2>> > Can I acomplish this with ADLO?. If yes, how much extra </FONT>
<BR><FONT SIZE=2>> work will be needed</FONT>
<BR><FONT SIZE=2>> > you think?</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> I'm not familar with EPIA. Wasn't that the motherboard that </FONT>
<BR><FONT SIZE=2>> had all this</FONT>
<BR><FONT SIZE=2>> video emulation code (whatever you would call it). what's the gfx card</FONT>
<BR><FONT SIZE=2>> anyway?</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> anyway. if you can separate out the vga bios from rest of the </FONT>
<BR><FONT SIZE=2>> bios (and it</FONT>
<BR><FONT SIZE=2>> can function standalone), then there's no reason why it would </FONT>
<BR><FONT SIZE=2>> not work.</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> as for "how much extra work" depends on what you want to use </FONT>
<BR><FONT SIZE=2>> it for. for</FONT>
<BR><FONT SIZE=2>> example IDE code in bochs-bios could use some more work (last time I</FONT>
<BR><FONT SIZE=2>> looked at it).</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> -- </FONT>
<BR><FONT SIZE=2>> Adam Sulmicki</FONT>
<BR><FONT SIZE=2>> <A HREF="http://www.eax.com" TARGET="_blank">http://www.eax.com</A>    The Supreme Headquarters of the 32 bit registers</FONT>
<BR><FONT SIZE=2>> </FONT>
</P>

</BODY>