<HTML><HEAD><TITLE></TITLE>
<META http-equiv=Content-Type content="text/html; charset=ks_c_5601-1987">
<META content="MSHTML 6.00.2800.1141" name=GENERATOR>
<STYLE title=ezform_style_1>P {
MARGIN-TOP: 0mm; MARGIN-BOTTOM: 0mm
}
</STYLE>
</HEAD>
<BODY style="FONT-SIZE: 10pt">
<DIV>I have epia board. I had followed the HOWTO/EPIA Documentation.<BR>But The debug messages are like this below.<BR>What's wrong? I use a ROM Emulator.<BR>And I use mkelfImage from freebios/util/mkelfImage/.<BR>Please, Help me!!<BR>=====================================================<BR>LinuxBIOS-1.0.0 Tue Mar 18 21:45:13 KST 2003 starting...<BR>Copying LinuxBIOS to ram.<BR>Jumping to LinuxBIOS.<BR>LinuxBIOS-1.0.0 Tue Mar 18 21:45:13 KST 2003 booting...<BR>Finding PCI configuration type.<BR>PCI: Using configuration type 1<BR>Scanning PCI bus...PCI: pci_scan_bus for bus 0<BR>PCI: 00:00.0 [1106/0601]<BR>PCI: 00:01.0 [1106/8601]<BR>PCI: 00:11.0 [1106/8231]<BR>PCI: 00:11.1 [1106/0571]<BR>PCI: 00:11.2 [1106/3038]<BR>PCI: 00:11.3 [1106/3038]<BR>PCI: 00:11.4 [1106/8235]<BR>PCI: 00:11.5 [1106/3058]<BR>PCI: 00:11.6 [1106/3068]<BR>PCI: 00:12.0 [1106/3065]<BR>PCI: pci_scan_bus for bus 1<BR>PCI: pci_scan_bus returning with max=01<BR>PCI: pci_scan_bus returning with max=01<BR>done<BR>Allocating PCI resources...<BR>PCI: 00:00.0 register 10(00000008), read-only ignoring it<BR>PCI: 00:00.0 register 10(00000008), read-only ignoring it<BR>PCI: 00:00.0 register 10(00000008), read-only ignoring it<BR>PCI: 00:00.0 register 10(00000008), read-only ignoring it<BR>ASSIGN RESOURCES, bus 0<BR>PCI: 00:01.0 1c <- [0x00001000 - 0x00000fff] bus 1 io<BR>PCI: 00:01.0 24 <- [0xfeb00000 - 0xfeafffff] bus 1 prefmem<BR>PCI: 00:01.0 20 <- [0xfeb00000 - 0xfeafffff] bus 1 mem<BR>PCI: 00:11.1 20 <- [0x00001c40 - 0x00001c4f] io<BR>PCI: 00:11.2 20 <- [0x00001c00 - 0x00001c1f] io<BR>PCI: 00:11.3 20 <- [0x00001c20 - 0x00001c3f] io<BR>PCI: 00:11.5 10 <- [0x00001000 - 0x000010ff] io<BR>PCI: 00:11.5 14 <- [0x00001c50 - 0x00001c53] io<BR>PCI: 00:11.5 18 <- [0x00001c60 - 0x00001c63] io<BR>PCI: 00:11.6 10 <- [0x00001400 - 0x000014ff] io<BR>PCI: 00:12.0 10 <- [0x00001800 - 0x000018ff] io<BR>PCI: 00:12.0 14 <- [0xfeb00000 - 0xfeb000ff] mem<BR>ASSIGNED RESOURCES, bus 0<BR>done.<BR>Enabling PCI resourcess...PCI: 00:00.0 cmd <- 06<BR>PCI: 00:01.0 cmd <- 07<BR>PCI: 00:11.0 cmd <- 87<BR>PCI: 00:11.1 cmd <- 81<BR>PCI: 00:11.2 cmd <- 01<BR>PCI: 00:11.3 cmd <- 01<BR>PCI: 00:11.4 cmd <- 00<BR>PCI: 00:11.5 cmd <- 01<BR>PCI: 00:11.6 cmd <- 01<BR>PCI: 00:12.0 cmd <- 83<BR>done.<BR>Initializing PCI devices...<BR>PCI devices initialized<BR>sizeram: returning 0x1fc00 KB<BR>sizeram: NOT returning 0x1fc00 KB<BR>sizeram: there are still some SPD problems ...<BR>sizeram: SO we return only 0x10000 KB<BR>totalram: 64M<BR>Initializing CPU #0<BR>Enabling cache...<BR>Setting fixed MTRRs(0-88) type: UC<BR>Setting fixed MTRRs(0-16) type: WB<BR>DONE fixed MTRRs<BR>Setting variable MTRR 0, base: 0MB, range: 64MB, type WB<BR>DONE variable MTRRs<BR>Clear out the extra MTRR's<BR>call intel_enable_fixed_mtrr()<BR>call intel_enable_var_mtrr()<BR>Leave setup_mtrrs<BR>done.</DIV>
<DIV>Max cpuid index : 1<BR>Vendor ID : CentaurHauls<BR>Processor Type : 0x00<BR>Processor Family : 0x06<BR>Processor Model : 0x07<BR>Processor Mask : 0x00<BR>Processor Stepping : 0x08<BR>Feature flags : 0x00803035</DIV>
<DIV><BR>MTRR check<BR>Fixed MTRRs : Enabled<BR>Variable MTRRs: Enabled</DIV>
<DIV>Disabling local apic...done.<BR>CPU #0 Initialized<BR>Mainboard fixup<BR>IDE enable in reg. 50 is 0x7<BR>set IDE reg. 50 to 0x7<BR>IRQs in reg. 4c are 0x4<BR>setting reg. 4c to 0x4<BR>enables in reg 0x40 0x8<BR>enables in reg 0x40 read back as 0xb<BR>enables in reg 0x9 0x8f<BR>enables in reg 0x9 read back as 0x8a<BR>command in reg 0x4 0x81<BR>command in reg 0x4 reads back as 0x7<BR>Ethernet fixup<BR>Configuring VIA LAN<BR>RTC Init<BR>Invalid CMOS LB checksum<BR>Final mainboard fixup<BR>Southbridge fixup<BR>setting southbridge<BR>Assigning IRQ 12 to 0:11.2<BR> Readback = 12<BR>Assigning IRQ 12 to 0:11.3<BR> Readback = 12<BR>Assigning IRQ 10 to 0:11.5<BR> Readback = 10<BR>Assigning IRQ 10 to 0:11.6<BR> Readback = 10<BR>setting ethernet<BR>Assigning IRQ 11 to 0:12.0<BR> Readback = 11<BR>setting pci slot<BR>Checking IRQ routing tables...<BR>/home/newbell/LinuxBios/freebios/src/arch/i386/lib/pirq_routing.c: 24:check_p<BR>irq_routing_table() - irq_routing_table located at: 0x0000a440<BR>done.<BR>Copying IRQ routing tables to 0xf0000...done.<BR>Verifing priq routing tables copy at 0xf0000...failed<BR>Wrote linuxbios table at: 00000500 - 00000664 checksum 48cc</DIV>
<DIV>Welcome to elfboot, the open sourced starter.<BR>January 2002, Eric Biederman.<BR>Version 1.2</DIV>
<DIV> 203:init_bytes() - zkernel_start:0xfff00000 zkernel_mask:0x0000ffff<BR>Searching for 16 byte tags<BR> 64:rom_read_bytes() - overflowed source buffer. max_block = 15<BR>init_bytes found 0 tags<BR>Found ELF candiate at offset 0<BR>New segment addr 0x94000 size 0x74e8 offset 0x60 filesize 0x396c<BR>(cleaned up) New segment addr 0x94000 size 0x74e8 offset 0x60 filesize 0x396c<BR>Loading Segment: addr: 0x0000000000094000 memsz: 0x00000000000074e8 filesz: 0x00<BR>0000000000396c<BR>Clearing Segment: addr: 0x000000000009796c memsz: 0x0000000000003b7c<BR>Jumping to boot code at 0x94000<BR>ROM segment 0x4041 length 0x0006 reloc 0x9400<BR>Etherboot 5.0.8 (GPL) Tagged ELF for [VIA 86C100]<BR>Boot from (N)etwork or from (L)ocal? clocks_per_tick = 420319<BR>N<BR>Probing...[VIA 86C100]Found VIA 6102 ROM address 0x0000<BR>rhine.c v1.0.0 2000-01-07<BR>IO address 1800 Ethernet Address: 00:00:F0:91:58:39<BR>Analyzing Media type,this will take several seconds........OK<BR>Linespeed=10Mbs Fullduplex<BR>The PCI BIOS has not enabled this device!<BR>Updating PCI command 0003->0007. pci_bus 00 pci_device_fn 90<BR>Searching for server (DHCP)...<BR>..Me: 165.213.172.236, Server: 165.213.172.155, Gateway 165.213.172.1<BR>Loading 165.213.172.155:/tftpboot/vmlinuz.xterm ...(ELF)... ....................<BR>................................................................................<BR>................................................................................<BR>................................................................................<BR>................................................................................<BR>................................................................................<BR>................................................................................<BR>................................................................................<BR>.....................................................................done<BR>rhine disable<BR>Unknown bootloader class!<BR>type=0x000101C0<BR>data=0x000989CE<BR>Firmware type: LinuxBIOS </DIV></BODY></HTML>