<DIV>
<DIV> </DIV>
<DIV> Sorry. <FONT color=#40a0ff>I donot know whats the problem. I can get mails properly sent through this id.</FONT></DIV>
<DIV>Hi,</DIV>
<DIV> I have the custom board (geode sc1200) with peripherals like ethernet, PCI audio video decoder, Tuner, hard disk, SDRAM, Flash memory. I will have to have my BIOS program, linux kernel and specific application program in my Flash memory. I have hard disk only for storing files.</DIV>
<DIV> </DIV>
<DIV> My Flash memory is of 32 Mbits and SDRAM 32MBytes. </DIV>
<DIV> </DIV>
<DIV> I want to use LinuxBios. I build it for nano mainboard. But still I have many doubts. In normal BIOS, we will say the bios program to load the bootloader from hard disk into location 0000:7C00. </DIV>
<DIV> </DIV>
<DIV> What part of the program in Linuxbios will bring my linux kernel image from Flash into SDRAM?</DIV>
<DIV> </DIV>
<DIV> Is any options or something to be included in the configuration file to say to boot from Flash memory.</DIV>
<DIV> </DIV>
<DIV> In my embedded device the Flash memory is mapped to physical address 00000h to 3FFFFFh. So at what location should i place the linuxbios romimage and linux kernel image in my Flash memory? </DIV>
<DIV> </DIV>
<DIV> Where shall my application program be placed in Flash? I hope I should have a filesystem. Is the MTD meant for the filesystem?</DIV>
<DIV> </DIV>
<DIV> What part of the program in Linuxbios will bring my linux kernel image from Flash into SDRAM?</DIV>
<DIV> </DIV>
<DIV>Thanks in advance.</DIV>
<DIV> </DIV>
<DIV>Regards,</DIV>
<DIV>John.</DIV>
<DIV> </DIV></DIV><p><hr SIZE=1>
Do you Yahoo!?<br>
<a href="http://us.rd.yahoo.com/evt=10469/*http://sitebuilder.yahoo.com">Yahoo! SiteBuilder</a> - Free, easy-to-use web site design software