#
# LinuxBIOS config file for: PCCHIPS m8310lmr, Socket 7 (K7/Duron)
#

target ./newrom

# pcchips 758lmr
mainboard pcchips/m758lmr+

# Enable MII support (required for new 810/8310 mainboard)
option ENABLE_MII=1

# Enable Serial Console for debugging
option SERIAL_CONSOLE=1

# Use 256KB Standard Flash as Normal BIOS 
option USE_GENERIC_ROM=1
option STD_FLASH=1
option VGABIOS_START=0xfffc0000
option ZKERNEL_START=0xfffd0000

# payload size = 192KB
option PAYLOAD_SIZE=196608
# Rom image size = 63KB
option ROM_IMAGE_SIZE=64512

# We reuse docipl from DoC
docipl northsouthbridge/sis/630/ipl.S

# Use the internal VGA frame buffer device
option HAVE_FRAMEBUFFER=1
option HAVE_FRAMEBUFFER=1
option SMA_SIZE=8
option CONFIG_VGABIOS=1
option CONFIG_REALMODE_IDT=1
option CONFIG_PCIBIOS=1
dir src/bioscall

# use ELF Loader to load Etherboot
option USE_ELF_BOOT=1

# Use Etherboot as our payload 
#payload ~/filo-0.2/filo.elf
payload ../vgaeth.bin

# Add our own special make rules to handle 256KB flash with docipl
makerule romimage: linuxbios.rom payload.block docipl ;
addaction romimage cat payload.block linuxbios.rom docipl.bin > romimage

makerule docipl: ipl.o ;
addaction docipl objcopy -O binary -R .note -R .comment -S ipl.o docipl
addaction docipl dd if=docipl skip=126 of=docipl.bin

makerule linuxbios.rom: linuxbios.strip ;
addaction linuxbios.rom dd if=linuxbios.strip of=linuxbios.rom bs=$(ROM_IMAGE_SIZE) conv=sync

# Kernel command line parameters
# commandline root=/dev/hda1 console=ttyS0,115200 console=tty0 video=sisfb:1024x768-32@85,font:VGA8x16