LinuxBIOS-1.1.52.0_Fallback Mon Oct 13 22:11:33 EDT 2003 starting... setting up resource map.... done. Enabling routing table for node 00000000 done. Enabling SMP settings setup_remote_node setup_remote_done Renaming current temp node to 00000001 done. Enabling routing table for node 00000001 done. 00000002 nodes initialized. detect_mp_capabilities: 00000002 coherent_ht_finalize done setting up ht links.... done SMBus controller enabled Ram1.00 setting up CPU00 northbridge registers done. Ram1.01 setting up CPU01 northbridge registers done. Ram2.00 Enabling dual channel memory 166Mhz Interleaved RAM: 0x00400000 KB Ram2.01 Enabling dual channel memory disabling dimm01 disabling dimm01 166Mhz disabling dimm01 Interleaved RAM: 0x00600000 KB Ram3 ECC enabled ECC enabled Initializing memory: done Clearing memory: addr 00000000-000000ff ---------------------------------------------------------------done Initializing memory: done Clearing memory: addr 00000100-0000017f ++++++++++++++++++++++++++++++++done Ram4 Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.1.52.0_Fallback Mon Oct 13 22:11:33 EDT 2003 booting... Finding PCI configuration type. PCI: Using configuration type 1 Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Enumerating: AMD K8 Enumerating: AMD 8111 Enumerating buses...PCI: pci_scan_bus for bus 0 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] ops PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] ops PCI: 00:19.3 [1022/1103] enabled amdk8_scan_chains max: 0 starting... Hyper transport scan link: 0 max: 1 Missing static device: PCI: 01:00.0 PCI: pci_scan_bus for bus 1 PCI: 01:00.0 [ffff/ffff/00ffff] has unknown header type ff, ignoring. PCI: 01:00.0 No device operations PCI: 01:01.0 [ffff/ffff/00ffff] has unknown header type ff, ignoring. PCI: 01:01.0 No device operations PCI: pci_scan_bus returning with max=01 Hyper transport scan link: 0 new max: 1 Hypertransport scan link done Hyper transport scan link: 2 max: 2 PCI: 02:01.0 [1022/7450] enabled next_unitid: 0003 PCI: 02:03.0 [1022/7460] enabled next_unitid: 0007 PCI: pci_scan_bus for bus 2 PCI: 02:01.0 [1022/7450] bus ops PCI: 02:01.0 [1022/7450] enabled PCI: 02:01.1 [1022/7451] ops PCI: 02:01.1 [1022/7451] enabled PCI: 02:02.0 [1022/7450] bus ops PCI: 02:02.0 [1022/7450] enabled PCI: 02:02.1 [1022/7451] ops PCI: 02:02.1 [1022/7451] enabled PCI: 02:03.0 [1022/7460] enabled PCI: 02:04.0 [1022/7468] bus ops PCI: 02:04.0 [1022/7468] enabled PCI: 02:04.1 [1022/7469] ops PCI: 02:04.1 [1022/7469] enabled PCI: 02:04.2 [1022/746a] enabled PCI: 02:04.3 [1022/746b] ops PCI: 02:04.3 [1022/746b] enabled PCI: 02:04.5 [1022/746d] enabled amd8111_enable dev: PCI: 02:04.6 lpc_dev: PCI: 02:04.0 index: 6 reg: ffff -> ffbf done PCI: 02:04.6 [ffff/ffff] disabled PCI: pci_scan_bus for bus 3 PCI: 03:09.0 [14e4/16a7] ops PCI: 03:09.0 [14e4/16a7] enabled PCI: pci_scan_bus returning with max=03 PCI: pci_scan_bus for bus 4 PCI: pci_scan_bus returning with max=04 PCI: pci_scan_bus for bus 5 PCI: 05:00.0 [1022/7464] ops PCI: 05:00.0 [1022/7464] enabled PCI: 05:00.1 [1022/7464] ops PCI: 05:00.1 [1022/7464] enabled PCI: 05:00.2 [1022/7463] ops PCI: 05:00.2 [1022/7463] enabled amd8111_enable dev: PCI: 05:01.0 lpc_dev: PCI: 02:04.0 index: 9 reg: ffbf -> fdbf done PCI: 05:01.0 [ffff/ffff] disabled PCI: 05:0b.0 [1095/3114] ops PCI: 05:0b.0 [1095/3114] enabled PCI: 05:0c.0 [104c/8023] ops PCI: 05:0c.0 [104c/8023] enabled PCI: pci_scan_bus returning with max=05 PCI: pci_scan_bus returning with max=05 Hyper transport scan link: 2 new max: 5 Hypertransport scan link done amdk8_scan_chains max: 5 done amdk8_scan_chains max: 5 starting... amdk8_scan_chains max: 5 done PCI: pci_scan_bus returning with max=05 done Allocating resources... PCI: 01:00.0 missing read_resources PCI: 01:01.0 missing read_resources PCI: 01:00.0 missing read_resources PCI: 01:01.0 missing read_resources PCI: 05:01.0 missing read_resources PCI: 05:01.0 missing read_resources PCI: 05:01.0 missing read_resources PCI: 02:04.6 missing read_resources PCI: 02:04.6 missing read_resources ASSIGN RESOURCES, bus 0 PCI: 01:00.0 missing read_resources PCI: 01:01.0 missing read_resources PCI: 00:18.0 c8 <- [0x00003000 - 0x00002fff] node 0 link 0 io PCI: 01:00.0 missing read_resources PCI: 01:01.0 missing read_resources PCI: 00:18.0 80 <- [0xfec00000 - 0xfebfffff] node 0 link 0 mem PCI: 02:04.6 missing read_resources PCI: 00:18.0 c0 <- [0x00001000 - 0x00002fff] node 0 link 2 io PCI: 02:04.6 missing read_resources PCI: 00:18.0 b8 <- [0xfe900000 - 0xfebfffff] node 0 link 2 mem ASSIGN RESOURCES, bus 1 PCI: 01:00.0 missing set_resources PCI: 01:01.0 missing set_resources ASSIGNED RESOURCES, bus 1 ASSIGN RESOURCES, bus 2 PCI: 02:01.0 1c <- [0x00002000 - 0x00001fff] bus 3 io PCI: 02:01.0 24 <- [0xfeb00000 - 0xfeafffff] bus 3 prefmem PCI: 02:01.0 20 <- [0xfe900000 - 0xfe9fffff] bus 3 mem ASSIGN RESOURCES, bus 3 PCI: 03:09.0 10 <- [0xfe900000 - 0xfe90ffff] mem ASSIGNED RESOURCES, bus 3 PCI: 02:01.1 10 <- [0xfeb00000 - 0xfeb00fff] mem PCI: 02:02.0 1c <- [0x00002000 - 0x00001fff] bus 4 io PCI: 02:02.0 24 <- [0xfeb00000 - 0xfeafffff] bus 4 prefmem PCI: 02:02.0 20 <- [0xfeb00000 - 0xfeafffff] bus 4 mem PCI: 02:02.1 10 <- [0xfeb01000 - 0xfeb01fff] mem PCI: 05:01.0 missing read_resources PCI: 02:03.0 1c <- [0x00001000 - 0x00001fff] bus 5 io PCI: 05:01.0 missing read_resources PCI: 02:03.0 24 <- [0xfeb00000 - 0xfeafffff] bus 5 prefmem PCI: 05:01.0 missing read_resources PCI: 02:03.0 20 <- [0xfea00000 - 0xfeafffff] bus 5 mem ASSIGN RESOURCES, bus 5 PCI: 05:00.0 10 <- [0xfea04000 - 0xfea04fff] mem PCI: 05:00.1 10 <- [0xfea05000 - 0xfea05fff] mem PCI: 05:00.2 10 <- [0xfea08000 - 0xfea080ff] mem PCI: 05:00.2 14 <- [0xfea09000 - 0xfea0901f] mem PCI: 05:01.0 missing set_resources PCI: 05:0b.0 10 <- [0x00001010 - 0x00001017] io PCI: 05:0b.0 14 <- [0x00001030 - 0x00001033] io PCI: 05:0b.0 18 <- [0x00001020 - 0x00001027] io PCI: 05:0b.0 1c <- [0x00001040 - 0x00001043] io PCI: 05:0b.0 20 <- [0x00001000 - 0x0000100f] io PCI: 05:0b.0 24 <- [0xfea07000 - 0xfea073ff] mem PCI: 05:0c.0 10 <- [0xfea06000 - 0xfea067ff] mem PCI: 05:0c.0 14 <- [0xfea00000 - 0xfea03fff] mem ASSIGNED RESOURCES, bus 5 PCI: 02:04.0 00 <- [0x00000000 - 0xffffffff] io PCI: 02:04.0 00 <- [0x00000000 - 0xffffffff] mem PCI: 02:04.1 20 <- [0x00002460 - 0x0000246f] io PCI: 02:04.2 10 <- [0x00002440 - 0x0000245f] io PCI: 02:04.5 10 <- [0x00002000 - 0x000020ff] io PCI: 02:04.5 14 <- [0x00002400 - 0x0000243f] io PCI: 02:04.6 missing set_resources ASSIGNED RESOURCES, bus 2 ASSIGNED RESOURCES, bus 0 done. Enabling resourcess... PCI: 00:18.0 cmd <- 00 PCI: 01:00.0 missing enable_resources PCI: 01:01.0 missing enable_resources PCI: 02:01.0 bridge ctrl <- 0000 PCI: 02:01.0 cmd <- 07 PCI: 03:09.0 cmd <- 02 PCI: 02:01.1 cmd <- 02 PCI: 02:02.0 bridge ctrl <- 0000 PCI: 02:02.0 cmd <- 07 PCI: 02:02.1 cmd <- 02 PCI: 02:03.0 bridge ctrl <- 0000 PCI: 02:03.0 cmd <- 07 PCI: 05:00.0 cmd <- 02 PCI: 05:00.1 cmd <- 02 PCI: 05:00.2 cmd <- 02 PCI: 05:01.0 missing enable_resources PCI: 05:0b.0 cmd <- 03 PCI: 05:0c.0 cmd <- 02 PCI: 02:04.0 cmd <- 0f PCI: 02:04.1 cmd <- 01 PCI: 02:04.2 cmd <- 01 PCI: 02:04.3 cmd <- 00 PCI: 02:04.5 cmd <- 01 PCI: 02:04.6 missing enable_resources PCI: 00:18.1 cmd <- 00 PCI: 00:18.2 cmd <- 00 PCI: 00:18.3 cmd <- 00 PCI: 00:19.0 cmd <- 00 PCI: 00:19.1 cmd <- 00 PCI: 00:19.2 cmd <- 00 PCI: 00:19.3 cmd <- 00 done. Initializing devices... PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:19.3 init NB: Function 3 Misc Control.. done. PCI: 02:01.0 init PCI: 02:02.0 init PCI: 02:04.0 init lpc_init PCI: 02:04.1 init ide_init IDE1 IDE0 PCI: 02:04.3 init set power on after power fail PCI: 05:00.0 init USB: Setting up controller.. done. PCI: 05:00.1 init USB: Setting up controller.. done. PCI: 05:00.2 init USB: Setting up controller.. done. PCI: 03:09.0 init BROADCOM_NIC_FIXUP: done PCI: 05:0b.0 init SI_SATA_FIXUP: done PCI: 05:0c.0 init TI_FIREWIRE_FIXUP: done Devices initialized mmio_base: 3932160KB totalram: 5888M Initializing CPU #0 Enabling cache... Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-88) type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 512MB, type WB Setting variable MTRR 3, base: 3584MB, range: 256MB, type WB Setting variable MTRR 4, base: 4096MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's call intel_enable_fixed_mtrr() call intel_enable_var_mtrr() Leave setup_mtrrs done. Max cpuid index : 1 Vendor ID : AuthenticAMD Processor Type : 0x00 Processor Family : 0x0f Processor Model : 0x05 Processor Mask : 0x00 Processor Stepping : 0x08 Feature flags : 0x078bfbff MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled Setting up local apic... apic_id: 0 done. CPU #0 Initialized secondary_cpu_init Waiting for 2 CPUS to stop mmio_base: 3932160KB Initializing CPU #1 Enabling cache... Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-88) type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 2, base: 3072MB, range: 512MB, type WB Setting variable MTRR 3, base: 3584MB, range: 256MB, type WB Setting variable MTRR 4, base: 4096MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's call intel_enable_fixed_mtrr() call intel_enable_var_mtrr() Leave setup_mtrrs done. Max cpuid index : 1 Vendor ID : AuthenticAMD Processor Type : 0x00 Processor Family : 0x0f Processor Model : 0x05 Processor Mask : 0x00 Processor Stepping : 0x08 Feature flags : 0x078bfbff MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled Setting up local apic... apic_id: 16777216 done. CPU #1 Initialized secondary_cpu_init 1/1 All AP CPUs stopped Checking IRQ routing tables... /home/yhlu/xx/xx/freebios2/src/arch/i386/boot/pirq_routing.c: 29:check_pirq_routing_table() - irq_routing_table located at: 0x0000c400 /home/yhlu/xx/xx/freebios2/src/arch/i386/boot/pirq_routing.c: 37:check_pirq_routing_table() - checksum is: 0x35 but should be: 0x1e /home/yhlu/xx/xx/freebios2/src/arch/i386/boot/pirq_routing.c: 55:check_pirq_routing_table() - checksum error in irq routing table done. Copying IRQ routing tables to 0xf0000...done. Verifing priq routing tables copy at 0xf0000...succeed Wrote the mp table end at: 00000020 - 0000020c Wrote linuxbios table at: 00000500 - 00000afc checksum aa54 mainboard fixup pass 7 done Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 Found ELF candiate at offset 0 Loading Etherboot version: 5.2.0 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x44d27 offset 0xb0 filesize 0x6010 (cleaned up) New segment addr 0x20000 size 0x44d27 offset 0xb0 filesize 0x6010 Loading Segment: addr: 0x00000000effd7cf8 memsz: 0x0000000000006184 filesz: 0x0000000000006010 Clearing Segment: addr: 0x00000000effddd08 memsz: 0x0000000000000174 Loading Segment: addr: 0x0000000000026184 memsz: 0x000000000003eba3 filesz: 0x0000000000000000 Clearing Segment: addr: 0x0000000000026184 memsz: 0x000000000003eba3 Jumping to boot code at 0x20000 ROM segment 0x0000 length 0x0000 reloc 0x00020000 CPU 1868 Mhz Etherboot 5.2.0 (GPL) http://etherboot.org Tagged ELF for [TG3][IDE] Relocating _text from: [00026010,00066440) to [efebfbd0,eff00000) Probing pci nic... [tg3-5703X]Ethernet addr: 00:E0:81:F0:19:63 Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) Link is up at 100 Mbps, half duplex. Searching for server (DHCP)... ..Me: 192.168.1.187, Server: 192.168.1.1, Gateway 192.168.1.1 Loading 192.168.1.1:ram0_2.5_2.4.22_k8_mydisk4.elf ...(ELF)... ......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................done Firmware type: LinuxBIOS ok old bootloader convention, maybe loadlin? Bootdata ok (command line is root=/dev/ram0 rw console=ttyS0,115200n8 ) Linux version 2.4.22 (root@tst-rhamd64) (gcc version 3.2.2 20030313 (Red Hat Linux 3.2.2-10)) #4 SMP Mon Aug 25 00:17:47 PDT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000000b5c (reserved) BIOS-e820: 0000000000000b5c - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 00000000f0000000 (usable) BIOS-e820: 0000000100000000 - 0000000180000000 (usable) kernel direct mapping tables upto 10180000000 @ 8000-f000 Scanning NUMA topology in Northbridge 24 Node 0 MemBase 0000000000000000 Limit 00000000ffffffff Node 1 MemBase 0000000100000000 Limit 000000017fffffff Node map not sorted 100000000,0 No NUMA configuration found Faking a node at 0000000000000000-0000000180000000 Bootmem setup node 0 0000000000000000-0000000180000000 hm, page 00000000 reserved twice. Scan SMP from 0000010000000000 for 1024 bytes. found SMP MP-table at 0000000000000010 hm, page 00000000 reserved twice. hm, page 00001000 reserved twice. hm, page 00000000 reserved twice. hm, page 00001000 reserved twice. setting up node 0 0-180000 On node 0 totalpages: 1572864 zone(0): 4096 pages. zone(1): 1568768 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: TYAN Product ID: S2885 APIC at: 0xFEE00000 Processor #0 15:5 APIC version 16 Processor #1 15:5 APIC version 16 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 Checking aperture... CPU 0: aperture @ 1ee0000000 size 64 MB Aperture from northbridge cpu 0 beyond 4GB. Ignoring. AGP bridge at 01:00:00 Aperture from AGP @ 0 size 4096 MB (APSIZE 0) Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ c000000 Kernel command line: root=/dev/ram0 rw console=ttyS0,115200n8 Initializing CPU#0 time.c: Detected 1.193182 MHz PIT timer. time.c: Detected 1793.258 MHz TSC timer. Console: colour VGA+ 80x25 Calibrating delay loop... 3578.26 BogoMIPS Memory: 5820116k/6291456k available (1954k kernel code, 0k reserved, 649k data, 376k init) Dentry cache hash table entries: 131072 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 9, 2097152 bytes) Mount cache hash table entries: 256 (order: 0, 4096 bytes) Buffer cache hash table entries: 262144 (order: 9, 2097152 bytes) Page-cache hash table entries: 262144 (order: 9, 2097152 bytes) CPU: L1 I Cache: 64K (64 bytes/line/2 way), D cache 64K (64 bytes/line/2 way) CPU: L2 Cache: 1024K (64 bytes/line/8 way) Machine Check Reporting enabled for CPU#0 POSIX conformance testing by UNIFIX mtrr: v2.02 (20020716)) CPU: L1 I Cache: 64K (64 bytes/line/2 way), D cache 64K (64 bytes/line/2 way) CPU: L2 Cache: 1024K (64 bytes/line/8 way) CPU0: stepping 08 per-CPU timeslice cutoff: 5120.06 usecs. Booting processor 1/1 rip 6000 page 00000100094f2000 Initializing CPU#1 Calibrating delay loop... 3578.26 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line/2 way), D cache 64K (64 bytes/line/2 way) CPU: L2 Cache: 1024K (64 bytes/line/8 way) Machine Check Reporting enabled for CPU#1 CPU1: stepping 08 Total of 2 processors activated (7156.53 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. ..TIMER: vector=0x31 pin1=2 pin2=0 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. Detected 12.453 MHz APIC timer. cpu: 0, clocks: 1992509, slice: 664169 CPU0 cpu: 1, clocks: 1992509, slice: 664169 CPU1 checking TSC synchronization across CPUs: passed. time.c: Using PIT/TSC based timekeeping. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle PCI: Using configuration type 1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Scanning bus 01 from mptable PCI: Scanning bus 06 from mptable PCI: Cannot allocate resource region 8 of bridge 02:01.0 PCI: Cannot allocate resource region 7 of bridge 02:03.0 PCI: Cannot allocate resource region 8 of bridge 02:03.0 PCI: Cannot allocate resource region 0 of device 02:01.1 PCI: Cannot allocate resource region 0 of device 02:02.1 PCI: Cannot allocate resource region 4 of device 02:04.1 PCI: Cannot allocate resource region 0 of device 02:04.2 PCI: Cannot allocate resource region 0 of device 02:04.5 PCI: Cannot allocate resource region 1 of device 02:04.5 PCI: Failed to allocate resource 0(0-fff) for 02:01.1 PCI: Failed to allocate resource 0(0-fff) for 02:02.1 PCI: Failed to allocate resource 4(0-f) for 02:04.1 PCI: Failed to allocate resource 0(0-1f) for 02:04.2 PCI: Failed to allocate resource 0(0-ff) for 02:04.5 PCI: Failed to allocate resource 1(0-3f) for 02:04.5 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ c000000 size 65536 KB PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). IA32 emulation $Id: sys_ia32.c,v 1.58 2003/05/09 17:21:17 ak Exp $ Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Non-volatile memory driver v1.2 amd768_rng: AMD768 system management I/O registers at 0xF00. amd768_rng hardware driver 0.1.0 loaded Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 11 (usb?) FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.1.13-k1 Copyright (c) 1999-2003 Intel Corporation. tg3.c:v1.6 (June 11, 2003) PCI: No IRQ known for interrupt pin A of device 03:09.0. Probably buggy MP table. eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:f0:19:63 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 02:04.1 PCI: Device 02:04.1 not available because of resource collisions PCI: Device 02:04.1 not available because of resource collisions AMD8111: (ide_setup_pci_device:) Could not enable device. AMD8111: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD_IDE: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) UDMA100 controller on pci02:04.1 AMD8111: dma_base is invalid (0x0000) ide0: AMD8111 Bus-Master DMA disabled (BIOS) AMD8111: dma_base is invalid (0x0000) ide1: AMD8111 Bus-Master DMA disabled (BIOS) SiI3114 Serial ATA: IDE controller at PCI slot 05:0b.0 PCI: No IRQ known for interrupt pin A of device 05:0b.0. Probably buggy MP table. SiI3114 Serial ATA: chipset revision 1 SiI3114 Serial ATA: not 100% native mode: will probe irqs later ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio hde: WDC WD360GD-00FNA0, ATA DISK drive hdg: IRQ probe failed (0xfffffffffffffff8) hdg: IRQ probe failed (0xfffffffffffffff8) hdg: IRQ probe failed (0xfffffffffffffff8) hdg: IRQ probe failed (0xfffffffffffffff8) ide2 at 0xffffff0000011080-0xffffff0000011087,0xffffff000001108a on irq 17 hde: attached ide-disk driver. hde: host protected area => 1 hde: 72303840 sectors (37020 MB) w/8192KiB Cache, CHS=4500/255/63, UDMA(133) Partition check: hde: hde1 hde2 hde3 SCSI subsystem driver Revision: 1.00 Fusion MPT base driver 2.05.05+ Copyright (c) 1999-2002 LSI Logic Corporation mptbase: 0 MPT adapters found, 0 installed. Fusion MPT SCSI Host driver 2.05.05+ ohci1394: $Rev: 1010 $ Ben Collins PCI: No IRQ known for interrupt pin A of device 05:0c.0. Probably buggy MP table. ohci1394: Failed to allocate shared interrupt 0 video1394: Installed video1394 module raw1394: /dev/raw1394 device initialized sbp2: $Rev: 1010 $ Ben Collins ieee1394: Loaded AMDTP driver ieee1394: Loaded CMP driver usb.c: registered new driver hub host/usb-uhci.c: $Revision: 1.275 $ time 00:19:41 Aug 25 2003 host/usb-uhci.c: High bandwidth mode enabled host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 32768 buckets, 512Kbytes TCP: Hash tables configured (established 131072 bind 65536) RAMDISK: Compressed image found at block 0 EXT2-fs warning: maximal mount count reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 376k freed INIT: version 2.84 boo Welcome to Liuzhi Linux Release Mounting proc file system SUCCESS Writing mtab Can't find / in /etc/fstab Clear temp folder SUCCESS Setting hostname SUCCESS INIT: Entering runlevel: 3 cmos_util start Set loop back interface SUCCESS syslogd: Couldn't get file descriptor for socket /dev/log: Address family not supported by protocol Start syslog daemon SUCCESS Start klog daemon SUCCESS Start port mapper SUCCESS Liuzhi Linux release Kernel 2.4.22 on an x86_64 lzlinux login: root Password: login[50]: root login on `ttyS0' BusyBox v0.60.5 (2003.03.24-05:47+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. ~ # IA32 syscall 134 from update not implemented update: This kernel does not need update(8). Exiting. ~ # cat /proc/pci PCI devices found: Bus 0, device 24, function 0: Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge (rev 0). Bus 0, device 24, function 1: Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge (rev 0). Bus 0, device 24, function 2: Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge (rev 0). Bus 0, device 24, function 3: Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge (rev 0). Bus 0, device 25, function 0: Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge (#2) (rev 0). Bus 0, device 25, function 1: Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge (#2) (rev 0). Bus 0, device 25, function 2: Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge (#2) (rev 0). Bus 0, device 25, function 3: Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge (#2) (rev 0). Bus 1, device 0, function 0: Host bridge: Advanced Micro Devices [AMD] AMD-8151 System Controller (rev 19). Prefetchable 32 bit memory at 0x0 [0xfffffff]. Bus 1, device 1, function 0: PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge (rev 19). Bus 2, device 1, function 0: PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 18). Master Capable. Latency=64. Bus 2, device 1, function 1: PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 1). Non-prefetchable 64 bit memory at 0x0 [0xfff]. Bus 2, device 2, function 0: PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (#2) (rev 18). Master Capable. Latency=64. Bus 2, device 2, function 1: PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (#2) (rev 1). Non-prefetchable 64 bit memory at 0x0 [0xfff]. Bus 2, device 3, function 0: PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 7). Master Capable. Latency=64. Bus 2, device 4, function 0: ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 5). Bus 2, device 4, function 1: IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 3). Master Capable. Latency=64. I/O at 0x0 [0xf]. Bus 2, device 4, function 2: SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 2). Master Capable. Latency=64. I/O at 0x0 [0x1f]. Bus 2, device 4, function 3: Non-VGA unclassified device: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 5). Master Capable. Latency=64. Bus 2, device 4, function 5: Multimedia audio controller: Advanced Micro Devices [AMD] AMD-8111 AC97 Audio (rev 3). Master Capable. Latency=64. I/O at 0x0 [0xff]. I/O at 0x0 [0x3f]. Bus 3, device 9, function 0: Ethernet controller: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet (rev 2). Master Capable. Latency=64. Min Gnt=64. Non-prefetchable 64 bit memory at 0xfe900000 [0xfe90ffff]. Bus 5, device 0, function 0: USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 11). Master Capable. Latency=64. Max Lat=80. Non-prefetchable 32 bit memory at 0xfea04000 [0xfea04fff]. Bus 5, device 0, function 1: USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (#2) (rev 11). Master Capable. Latency=64. Max Lat=80. Non-prefetchable 32 bit memory at 0xfea05000 [0xfea05fff]. Bus 5, device 0, function 2: USB Controller: PCI device 1022:7463 (Advanced Micro Devices [AMD]) (rev 2). Master Capable. Latency=64. Non-prefetchable 32 bit memory at 0xfea08000 [0xfea080ff]. Non-prefetchable 32 bit memory at 0xfea09000 [0xfea0901f]. Bus 5, device 11, function 0: Unknown mass storage controller: PCI device 1095:3114 (CMD Technology Inc) (rev 1). Master Capable. Latency=64. I/O at 0x1010 [0x1017]. I/O at 0x1030 [0x1033]. I/O at 0x1020 [0x1027]. I/O at 0x1040 [0x1043]. I/O at 0x1000 [0x100f]. Non-prefetchable 32 bit memory at 0xfea07000 [0xfea073ff]. Bus 5, device 12, function 0: FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (rev 0). Master Capable. Latency=64. Min Gnt=2.Max Lat=4. Non-prefetchable 32 bit memory at 0xfea06000 [0xfea067ff]. Non-prefetchable 32 bit memory at 0xfea00000 [0xfea03fff]. ~ #