<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=US-ASCII">
<META content="MSHTML 6.00.2900.2180" name=GENERATOR></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial"
bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=role_document
face=Arial color=#000000 size=2>
<DIV>It's obvious that something strange is happening with AGP and XFree86
4.4. The latest patched driver for the epia M crashes in backend.c,
function agp_backend_initialize() of the agpgart driver, at
bridge->driver->configure(). Commenting out that line will enable
the driver to be installed but Xwindows will crash hard while attempting to play
mpeg videos. I was able to use AGP stuff posted by Dave Ashley in
"Question about AGP (epia-m)" post but my system will not crash everytime will
attempting to set the graphics aperture size. Since this is getting into
kernel issues, I'll simply post the log that I have, grab V2 and start from
there. Thanks.</DIV>
<DIV> </DIV>
<DIV>LinuxBIOS-1.0.0 Thu Sep 9 10:03:48 EDT 2004 starting...<BR>80 08 07 0d 0a
01 40 00 04 75 75 00 82 08 00 01<BR>0e 04 0c 01 02 20 c0 a0 75 00 00 50 3c 50 2d
40<BR>a0 a0 50 50 00 00 00 00 00 41 4b 34 32 75 00 00<BR>00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 06<BR>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<BR>00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<BR>00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00<BR>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00<BR>Copying
LinuxBIOS to ram.<BR>Jumping to LinuxBIOS.<BR>LinuxBIOS-1.0.0 Thu Sep 9 10:03:48
EDT 2004 booting...<BR>Finding PCI configuration type.<BR>PCI: Using
configuration type 1<BR>Scanning PCI bus...PCI: pci_scan_bus for bus 0<BR>PCI:
00:00.0 [1106/3123]<BR>PCI: 00:01.0 [1106/b091]<BR>PCI: 00:0d.0
[1106/3044]<BR>PCI: 00:10.0 [1106/3038]<BR>PCI: 00:10.1 [1106/3038]<BR>PCI:
00:10.2 [1106/3038]<BR>PCI: 00:10.3 [1106/3104]<BR>PCI: 00:11.0
[1106/3177]<BR>PCI: 00:11.1 [1106/0571]<BR>PCI: 00:11.5 [1106/3059]<BR>PCI:
00:12.0 [1106/3065]<BR>PCI: pci_scan_bus for bus 1<BR>PCI: 01:00.0
[1106/3122]<BR>PCI: pci_scan_bus returning with max=01<BR>PCI: pci_scan_bus
returning with max=01<BR>done<BR>turning framebuffer on<BR>Allocating PCI
resources...<BR>ASSIGN RESOURCES, bus 0<BR>PCI: 00:00.0 10 <- [0x00000000 -
0xf7ffffff] prefmem<BR>PCI: 00:01.0 1c <- [0x00001000 - 0x00000fff] bus 1
io<BR>PCI: 00:01.0 24 <- [0xf8000000 - 0xfbffffff] bus 1 prefmem<BR>PCI:
00:01.0 20 <- [0xfc000000 - 0xfcffffff] bus 1 mem<BR>ASSIGN RESOURCES, bus
1<BR>PCI: 01:00.0 10 <- [0xf8000000 - 0xfbffffff] prefmem<BR>PCI: 01:00.0 14
<- [0xfc000000 - 0xfcffffff] mem<BR>ASSIGNED RESOURCES, bus 1<BR>PCI: 00:0d.0
10 <- [0xfd000000 - 0xfd0007ff] mem<BR>PCI: 00:0d.0 14 <- [0x00001800 -
0x0000187f] io<BR>PCI: 00:10.0 20 <- [0x00001880 - 0x0000189f] io<BR>PCI:
00:10.1 20 <- [0x000018a0 - 0x000018bf] io<BR>PCI: 00:10.2 20 <-
[0x000018c0 - 0x000018df] io<BR>PCI: 00:10.3 10 <- [0xfd001000 - 0xfd0010ff]
mem<BR>PCI: 00:11.1 20 <- [0x000018e0 - 0x000018ef] io<BR>PCI: 00:11.5 10
<- [0x00001000 - 0x000010ff] io<BR>PCI: 00:12.0 10 <- [0x00001400 -
0x000014ff] io<BR>PCI: 00:12.0 14 <- [0xfd002000 - 0xfd0020ff]
mem<BR>ASSIGNED RESOURCES, bus 0<BR>Allocating VGA resource<BR>done.<BR>Enabling
PCI resourcess...PCI: 00:00.0 cmd <- 06<BR>PCI: 00:01.0 cmd <- 07<BR>PCI:
00:0d.0 cmd <- 83<BR>PCI: 00:10.0 cmd <- 01<BR>PCI: 00:10.1 cmd <-
01<BR>PCI: 00:10.2 cmd <- 01<BR>PCI: 00:10.3 cmd <- 02<BR>PCI: 00:11.0 cmd
<- 07<BR>PCI: 00:11.1 cmd <- 07<BR>PCI: 00:11.5 cmd <- 01<BR>PCI:
00:12.0 cmd <- 83<BR>PCI: 01:00.0 cmd <- 03<BR>done.<BR>Initializing PCI
devices...<BR>PCI devices initialized<BR>totalram: 96M<BR>Initializing CPU
#0<BR>Enabling cache...<BR>Setting fixed MTRRs(0-88) type: UC<BR>Setting fixed
MTRRs(0-16) type: WB<BR>DONE fixed MTRRs<BR>Setting variable MTRR 0,
base: 0MB, range: 64MB, type WB<BR>Setting
variable MTRR 1, base: 64MB, range: 32MB, type
WB<BR>DONE variable MTRRs<BR>Clear out the extra MTRR's<BR>call
intel_enable_fixed_mtrr()<BR>call intel_enable_var_mtrr()<BR>Leave
setup_mtrrs<BR>done.</DIV>
<DIV> </DIV>
<DIV>Max cpuid index : 1<BR>Vendor
ID :
CentaurHauls<BR>Processor Type : 0x00<BR>Processor
Family : 0x06<BR>Processor Model :
0x09<BR>Processor Mask : 0x00<BR>Processor Stepping :
0x01<BR>Feature flags : 0x0380b135</DIV>
<DIV> </DIV>
<DIV><BR>MTRR check<BR>Fixed MTRRs : Enabled<BR>Variable MTRRs:
Enabled</DIV>
<DIV> </DIV>
<DIV>Disabling local apic...done.<BR>CPU #0 Initialized<BR>mainboard
fixup<BR>northbridge_fixup<BR>southbridge_fixup<BR>final mainboard
fixup<BR>final Southbridge fixup<BR>enabling video shadow RAM<BR>setting
firewire<BR>Assigning IRQ 10 to 0:d.0<BR> Readback = 10<BR>setting
usb<BR>Assigning IRQ 11 to 0:10.0<BR> Readback = 11<BR>Assigning IRQ 10 to
0:10.1<BR> Readback = 10<BR>Assigning IRQ 12 to 0:10.2<BR> Readback
= 12<BR>Assigning IRQ 5 to 0:10.3<BR> Readback = 5<BR>setting
vt8235<BR>Assigning IRQ 5 to 0:11.1<BR> Readback = 5<BR>Assigning IRQ 12
to 0:11.5<BR> Readback = 12<BR>setting ethernet<BR>Assigning IRQ 11 to
0:12.0<BR> Readback = 11<BR>setting vga<BR>Assigning IRQ 11 to
1:0.0<BR> Readback = 11<BR>setting pci slot<BR>setting vt8235
slot<BR>Assigning IRQ 5 to 0:11.1<BR> Readback = 5<BR>Assigning IRQ 12 to
0:11.5<BR> Readback = 12<BR>INSTALL REAL-MODE IDT<BR>DO THE VGA
BIOS<BR>found VGA: vid=1106, did=3122<BR>Setting up VGA, VGABIOS_START:
0xfffc0000<BR>Looks like VGA_ROM is good: 0x55 0xaa<BR>VGA copy looks
good<BR>write_protect_vgabios<BR>bus/devfn = 0x100<BR>biosint: # 0x15, eax
0x5f00 ebx 0x100 ecx 0x100 edx 0x12<BR>biosint: ebp 0x11af4 esp 0xff2 edi 0xdb4c
esi 0x12410<BR>biosint: ip 0x637f cs 0xc000 flags 0x46<BR>biosint: # 0x1a, eax
0xb108 ebx 0x0 ecx 0x0 edx 0x3d5<BR>biosint: ebp 0x11af4 esp 0xfcc edi 0xf6 esi
0x155eb<BR>biosint: ip 0x40da cs 0xc000 flags 0x46<BR>0xb108: bus 0 devfn 0x0
reg 0xf6 val 0x3<BR>biosint: # 0x15, eax 0x5f02 ebx 0x100 ecx 0x101 edx
0x3d5<BR>biosint: ebp 0x11af4 esp 0xfb8 edi 0x44 esi 0x155eb<BR>biosint: ip
0x63cb cs 0xc000 flags 0x46<BR>biosint: # 0x15, eax 0x5f02 ebx 0x100 ecx 0x101
edx 0x3d5<BR>biosint: ebp 0x11af4 esp 0xfb8 edi 0x44 esi 0x155eb<BR>biosint: ip
0x63cb cs 0xc000 flags 0x46<BR>biosint: # 0x15, eax 0x5f02 ebx 0x100 ecx 0x101
edx 0x3d5<BR>biosint: ebp 0x11af4 esp 0xfb8 edi 0x44 esi 0x155eb<BR>biosint: ip
0x63cb cs 0xc000 flags 0x46<BR>biosint: # 0x15, eax 0x5f0f ebx 0x100 ecx 0x100
edx 0x3d5<BR>biosint: ebp 0x11af4 esp 0xfee edi 0x44 esi 0x12410<BR>biosint: ip
0x647e cs 0xc000 flags 0x2<BR>biosint: # 0x15, eax 0x5f02 ebx 0x0 ecx 0x1 edx
0x0<BR>biosint: ebp 0x11af4 esp 0xfdc edi 0x44 esi 0x12410<BR>biosint: ip 0x63cb
cs 0xc000 flags 0x46<BR>biosint: # 0x15, eax 0x5f18 ebx 0x1 ecx 0x0 edx
0x0<BR>biosint: ebp 0x11af4 esp 0xfde edi 0x44 esi 0x12410<BR>biosint: ip 0x6496
cs 0xc000 flags 0x46<BR>Checking IRQ routing tables...<BR>Copying IRQ routing
tables to 0xf0000...done.<BR>Verifing priq routing tables copy at
0xf0000...failed<BR>Wrote linuxbios table at: 00000500 - 0000066c checksum
c8a8</DIV>
<DIV> </DIV>
<DIV>Welcome to elfboot, the open sourced starter.<BR>January 2002, Eric
Biederman.<BR>Version 1.2</DIV>
<DIV> </DIV>
<DIV> 37:init_bytes() - zkernel_start:0xfffd0000
zkernel_mask:0x0000ffff<BR>Found ELF candiate at offset 0<BR>New segment addr
0x94000 size 0x71e8 offset 0x80 filesize 0x3650<BR>(cleaned up) New segment addr
0x94000 size 0x71e8 offset 0x80 filesize 0x3650<BR>Dropping non PT_LOAD
segment<BR>Loading Segment: addr: 0x0000000000094000 memsz: 0x00000000000071e8
filesz: 0x0000000000003650<BR>Clearing Segment: addr: 0x0000000000097650 memsz:
0x0000000000003b98<BR>Jumping to boot code at 0x94000<BR>ROM segment 0x9bb4
length 0x36f0 reloc 0x9400<BR>Etherboot 5.0.8 (GPL) Tagged ELF for [VIA
86C100]<BR>Boot from (N)etwork or from (L)ocal? clocks_per_tick =
630286<BR>N<BR>Probing...[VIA 86C100]Found VIA 6102 ROM address
0x0000<BR>rhine.c v1.0.0 2000-01-07<BR>IO address 1400 Ethernet Address:
00:40:63:CC:22:C3<BR>Analyzing Media type,this will take several
seconds........OK<BR>Linespeed=100Mbs Fullduplex<BR>The PCI BIOS has not enabled
this device!<BR>Updating PCI command 0083->0087. pci_bus 00 pci_device_fn
90<BR>Searching for server (DHCP)...<BR>..Me: 192.168.1.116, Server:
192.168.1.100, Gateway 192.168.1.1<BR>Loading 192.168.1.100:etherboot/bzImage
...(ELF)...
.........................................................................................................................................................................................................................................................................................................................done<BR>rhine
disable<BR>Unknown bootloader
class!<BR>type=0x00000000<BR>data=0x000986AE<BR>Firmware type:
LinuxBIOS<BR>Linux version 2.6.6-epia (<A
href="mailto:root@dhlinux1">root@dhlinux1</A>) (gcc version 3.3.1 (SuSE Linux))
#12 Wed Sep 8 23:13:05 EDT 2004<BR>BIOS-provided physical RAM
map:<BR> BIOS-e820: 0000000000000000 - 00000000000006d8
(reserved)<BR> BIOS-e820: 00000000000006d8 - 00000000000a0000
(usable)<BR> BIOS-e820: 0000000000100000 - 0000000006000000 (usable)<BR>0MB
HIGHMEM available.<BR>96MB LOWMEM available.<BR>On node 0 totalpages:
24576<BR> DMA zone: 4096 pages, LIFO batch:1<BR> Normal zone: 20480
pages, LIFO batch:5<BR> HighMem zone: 0 pages, LIFO batch:1<BR>DMI not
present.<BR>ACPI: Unable to locate RSDP<BR>Built 1 zonelists<BR>Kernel command
line: root=0100 rw console=ttyS0,115200n8 console=tty0<BR>Initializing
CPU#0</DIV>
<DIV> </DIV>
<DIV>:<BR>:<BR>:</DIV>
<DIV> </DIV>
<DIV>EXT3 FS on hda1, internal journal<BR>EXT3-fs: recovery
complete.<BR>EXT3-fs: mounted filesystem with ordered data mode.</DIV>
<DIV> </DIV>
<DIV>BusyBox v1.00-rc2 (2004.08.11-20:42+0000) Built-in shell (ash)<BR>Enter
'help' for a list of built-in commands.</DIV>
<DIV> </DIV>
<DIV>$ <BR>$ insmod agpgart.ko<BR> <BR>Linux agpgart interface v0.100 (c)
Dave Jones</DIV>
<DIV> </DIV>
<DIV>$ insmod via-agp.ko </DIV>
<DIV> </DIV>
<DIV>agpgart: Detected VIA CLE266 chipset<BR>agpgart: Maximum main memory to use
for agp memory: 62M<BR>agpgart: ok, memset(bridge->key_list, 0, PAGE_SIZE *
4)<BR>agpgart: disabling bridge->driver->configure() call for now (epia M
AGP is spawn of the Devil)<BR>agpgart: AGP aperture is 128M @ 0x0</DIV>
<DIV> </DIV>
<DIV>$ /usr/X11R6/bin/xinit /etc/site.xinitrc -- /usr/X11R6/bin/XFree86
tty0</DIV>
<DIV> </DIV>
<DIV>_XSERVTransSocketOpenCOTSServer: Unable to open socket for
inet6<BR>_XSERVTransOpen: transport open failed for
inet6/(none):0<BR>_XSERVTransMakeAllCOTSServerListeners: failed to open listener
for inet6</DIV>
<DIV> </DIV>
<DIV>XFree86 Version 4.4.0<BR>Release Date: 29 February 2004<BR>X Protocol
Version 11, Revision 0, Release 6.6<BR>Build Operating System: Linux
2.4.21-99-smp4G i686 [ELF] <BR>Current Operating System: Linux (none) 2.6.6-epia
#12 Wed Sep 8 23:13:05 EDT 2004 i686<BR>Build Date: 16 July 2004<BR>Changelog
Date: 29 February 2004<BR> Before reporting problems, check <A
href="http://www.XFree86.Org/">http://www.XFree86.Org/</A><BR> to make sure
that you have the latest version.<BR>Module Loader present<BR>Markers: (--)
probed, (**) from config file, (==) default setting,<BR> (++) from command
line, (!!) notice, (II) informational,<BR> (WW) warning, (EE) error, (NI)
not implemented, (??) unknown.<BR>(==) Log file: "/var/log/XFree86.0.log", Time:
Thu Jan 2 11:43:29 2003<BR>(==) Using config file:
"/etc/X11/XF86Config-4"<BR>(EE) VIA(0): vm86() syscall generated signal
8.<BR>Linear memory allocation failed<BR>(EE) VIA(0): [XvMC] Cannot use XvMC
without DRI!<BR>(EE) Couldn't load XKB keymap, falling back to pre-XKB
keymap<BR>atkbd.c: Unknown key released (translated set 2, code 0x7a on
isa0060/serio0).<BR>atkbd.c: This is an XFree86 bug. It shouldn't access
hardware directly.<BR>atkbd.c: Unknown key released (translated set 2, code 0x7a
on isa0060/serio0).<BR>atkbd.c: This is an XFree86 bug. It shouldn't access
hardware directly.<BR>Could not init font path element
/usr/X11R6/lib/X11/fonts/local, removing from list!</DIV>
<DIV> </DIV>
<DIV><BR> This should not happen!<BR> An unresolved function was
called!</DIV>
<DIV> </DIV>
<DIV>Fatal server error:</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>When reporting a problem related to a server crash, please send<BR>the full
server output, not just the last messages.<BR>This can be found in the log file
"/var/log/XFree86.0.log".<BR>Please report problems to <A
href="mailto:xfree86@xfree86.org">xfree86@xfree86.org</A>.<BR></DIV></FONT></BODY></HTML>