LinuxBIOS-1.1.8.0Fallback Sun Dec 18 12:01:05 CET 2005 starting...
 Enabling mainboard devices
 Enabling shadow ram
vt8623 init starting
Detecting Memory
Number of Banks 04
Number of Rows 0d
Priamry DRAM width08
No Columns 0a
MA type e0
Bank 0 (*16 Mb) 10
No Physical Banks 01
Total Memory (*16 Mb) 10
CAS Supported 2 2.5 
Cycle time at CL X     (nS)60
Cycle time at CL X-0.5 (nS)75
Cycle time at CL X-1   (nS)00
Starting at CAS 2.5
We can do CAS 2
tRP 48
tRCD 48
tRAS 2a
Low Bond 00  High Bondce  Setting DQS delay89vt8623 done
00:06 11 23 31 06 00 30 22 00 00 00 06 00 00 00 00 
10:08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 
20:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
30:00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 
40:00 18 88 80 82 44 00 00 18 99 88 80 82 44 00 00 
50:c8 de cf 88 e0 07 00 00 e0 00 10 10 10 10 00 00 
60:02 ff 00 30 d6 32 01 20 42 2d 43 58 00 44 00 00 
70:82 48 00 01 01 08 50 00 01 00 00 00 00 00 10 00 
80:0f 64 00 00 80 00 00 00 02 00 00 00 00 00 00 00 
90:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
a0:02 c0 20 00 07 02 00 1f 04 00 00 00 2f 02 04 00 
b0:00 00 00 00 80 00 00 00 88 00 00 04 00 00 00 00 
c0:01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 
d0:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
e0:00 dd 00 00 00 00 01 00 40 00 00 00 00 00 00 00 
f0:00 00 00 00 00 00 12 13 00 00 00 00 00 00 00 00 
AGP
 Doing MTRR init.
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8.0Fallback Sun Dec 18 12:01:05 CET 2005 booting...
clocks_per_usec: 1548
Enumerating buses...
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
APIC_CLUSTER: 0 enabled
PCI: pci_scan_bus for bus 0
PCI: 00:00.0 [1106/3123] enabled
PCI: 00:01.0 [1106/b091] enabled
Disabling static device: PCI: 00:0a.0
Disabling static device: PCI: 00:0a.1
In vt8235_enable 1106 3038.
PCI: 00:10.0 [1106/3038] enabled
In vt8235_enable 1106 3038.
PCI: 00:10.1 [1106/3038] enabled
In vt8235_enable 1106 3038.
PCI: 00:10.2 [1106/3038] enabled
In vt8235_enable 1106 3104.
PCI: 00:10.3 [1106/3104] enabled
In vt8235_enable 1106 3177.
Initialising Devices
PCI: 00:11.0 [1106/3177] enabled
In vt8235_enable 1106 0571.
PCI: 00:11.1 [1106/0571] enabled
In vt8235_enable 1106 3059.
PCI: 00:11.5 [1106/3059] enabled
In vt8235_enable ffff ffff.
In vt8235_enable 1106 3065.
PCI: 00:12.0 [1106/3065] enabled
PCI: pci_scan_bus for bus 1
PCI: 01:00.0 [1106/3122] enabled
PCI: pci_scan_bus returning with max=01
vt1211 enabling PNP devices.
PNP: 002e.0 enabled
vt1211 enabling PNP devices.
PNP: 002e.1 enabled
vt1211 enabling PNP devices.
PNP: 002e.2 enabled
vt1211 enabling PNP devices.
PNP: 002e.3 enabled
vt1211 enabling PNP devices.
PNP: 002e.b enabled
PCI: pci_scan_bus returning with max=01
done
Allocating resources...
Reading resources...
Done reading resources.
Setting resources...
I would set ram size to 0x40000 Kbytes
PCI: 00:10.0 20 <- [0x0000001800 - 0x000000181f] io
PCI: 00:10.1 20 <- [0x0000001820 - 0x000000183f] io
PCI: 00:10.2 20 <- [0x0000001840 - 0x000000185f] io
PCI: 00:10.3 10 <- [0x00febff000 - 0x00febff0ff] mem
PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] io
PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] irq
PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] drq
PNP: 002e.1 60 <- [0x0000000378 - 0x000000037f] io
PNP: 002e.1 70 <- [0x0000000007 - 0x0000000007] irq
PNP: 002e.1 74 <- [0x0000000003 - 0x0000000003] drq
PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.3 60 <- [0x00000002f8 - 0x00000002ff] io
PNP: 002e.3 70 <- [0x0000000003 - 0x0000000003] irq
PNP: 002e.b 60 <- [0x000000ec00 - 0x000000ecff] io
PCI: 00:11.1 20 <- [0x0000001860 - 0x000000186f] io
PCI: 00:11.5 10 <- [0x0000001000 - 0x00000010ff] io
PCI: 00:12.0 10 <- [0x0000001400 - 0x00000014ff] io
PCI: 00:12.0 14 <- [0x00fec00000 - 0x00fec000ff] mem
Done setting resources.
Done allocating resources.
Enabling resourcess...
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 bridge ctrl <- 000f
PCI: 00:01.0 cmd <- 147
PCI: 01:00.0 cmd <- 140
PCI: 00:10.0 subsystem <- 00/00
PCI: 00:10.0 cmd <- 141
PCI: 00:10.1 subsystem <- 00/00
PCI: 00:10.1 cmd <- 141
PCI: 00:10.2 subsystem <- 00/00
PCI: 00:10.2 cmd <- 141
PCI: 00:10.3 subsystem <- 00/00
PCI: 00:10.3 cmd <- 142
PCI: 00:11.0 cmd <- 147
PNP: 002e.0 - enabling
PNP: 002e.1 - enabling
PNP: 002e.2 - enabling
PNP: 002e.3 - enabling
PNP: 002e.b - enabling
PCI: 00:11.1 cmd <- 147
PCI: 00:11.5 subsystem <- 00/00
PCI: 00:11.5 cmd <- 141
PCI: 00:12.0 cmd <- 1c3
done.
Initializing devices...
Root Device init
PCI: 00:10.0 init
PCI: 00:10.1 init
PCI: 00:10.2 init
PCI: 00:10.3 init
PCI: 00:11.0 init
vt8235 init
RTC Init
Invalid CMOS LB checksum
pci_routing_fixup: dev is 00010e40
setting firewire
setting usb
Assigning IRQ 5 to 0:10.0
  Readback = 5
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 9 to 0:10.1
  Readback = 9
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 9 to 0:10.2
  Readback = 9
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 5 to 0:10.3
  Readback = 5
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
setting vt8235
Assigning IRQ 5 to 0:11.1
  Readback = 5
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 9 to 0:11.5
  Readback = 9
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
setting ethernet
Assigning IRQ 5 to 0:12.0
  Readback = 5
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
setting vga
Assigning IRQ 5 to 1:0.0
  Readback = 5
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
setting pci slot
setting cardbus slot
setting riser slot
PNP: 002e.0 init
PNP: 002e.1 init
PNP: 002e.2 init
PNP: 002e.3 init
PNP: 002e.b init
PCI: 00:11.1 init
Enabling VIA IDE.
ide_init: enabling compatibility IDE addresses
enables in reg 0x42 0x0
enables in reg 0x42 read back as 0x0
enables in reg 0x40 0x13
enables in reg 0x40 read back as 0x13
enables in reg 0x9 0x8a
enables in reg 0x9 read back as 0x8a
command in reg 0x4 0x7
command in reg 0x4 reads back as 0x7
PCI: 00:11.5 init
PCI: 00:12.0 init
Configuring VIA Rhine LAN
APIC_CLUSTER: 0 init
Initializing CPU #0
CPU: vendor Centaur device 698
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB
Setting fixed MTRRs(24-88) Type: WB
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range:  128MB, type WB
Setting variable MTRR 1, base:  128MB, range:   64MB, type WB
Setting variable MTRR 2, base:  192MB, range:   32MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Disabling local apic...done.
CPU #0 Initialized
PCI: 00:00.0 init
VT8623 random fixup ...
Frame buffer at d0000000
PCI: 00:01.0 init
VT8623 AGP random fixup ...
PCI: 01:00.0 init
VGA random fixup ...
INSTALL REAL-MODE IDT
DO THE VGA BIOS
found VGA: vid=1106, did=3122
rom base, size: fffc0000
BAD SIGNATURE 0x8 0x1e
biosint: # 0x10, eax 0x4f14 ebx 0x18003 ecx 0x1 edx 0x0
biosint: ebp 0x17fa8 esp 0xffa edi 0x0 esi 0xffff70b6
biosint: ip 0x8e22 cs 0x0 flags 0x46
BIOSINT: Unsupport int #0x10
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...done
Checking IRQ routing table consistency...
check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
done.
ACPI: Writing ACPI tables at f0400...
ACPI:     * FACS
ACPI:     * DSDT @ 000f049e Length 3f0
ACPI:     * FADT
ACPI: added table 1/5 Length now 40
ACPI: done.
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 00000b74  checksum 363f

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3

    33:stream_init() - rom_stream: 0xfffd0000 - 0xfffeffff
Found ELF candiate at offset 0
New segment addr 0x100000 size 0x26240 offset 0xa0 filesize 0xc1a8
(cleaned up) New segment addr 0x100000 size 0x26240 offset 0xa0 filesize 0xc1a8
New segment addr 0x126240 size 0x48 offset 0xc260 filesize 0x48
(cleaned up) New segment addr 0x126240 size 0x48 offset 0xc260 filesize 0x48
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000026240 filesz: 0x000000000000c1a8
Clearing Segment: addr: 0x000000000010c1a8 memsz: 0x000000000001a098
Loading Segment: addr: 0x0000000000126240 memsz: 0x0000000000000048 filesz: 0x0000000000000048
Jumping to boot code at 0x1089d0
FILO version 0.4.2 (root@linux) Sun Dec 18 11:59:15 CET 2005
collect_sys_info: boot eax = 0xe1fb007
collect_sys_info: boot ebx = 0xdff7500
collect_sys_info: boot arg = 0xdff7500
malloc_diag: alloc: 0 bytes (0 blocks), free: 16376 bytes (1 blocks)
malloc_diag: alloc: 24 bytes (1 blocks), free: 16352 bytes (1 blocks)
collect_elfboot_info: Bootloader: elfboot
collect_elfboot_info: Version: 1.3
malloc_diag: alloc: 40 bytes (2 blocks), free: 16336 bytes (1 blocks)
collect_linuxbios_info: Searching for LinuxBIOS tables...
find_lb_table: Found canidate at: 00000530
find_lb_table: header checksum o.k.
find_lb_table: table checksum o.k.
find_lb_table: record count o.k.
collect_linuxbios_info: Found LinuxBIOS table at: 00000530
malloc_diag: alloc: 128 bytes (3 blocks), free: 16248 bytes (1 blocks)
convert_memmap: 0x00000000000000 0x00000000000be8 16
convert_memmap: 0x00000000000be8 0x0000000009f418 1
convert_memmap: 0x000000000c0000 0x00000000030000 1
convert_memmap: 0x000000000f0000 0x00000000000c00 16
convert_memmap: 0x000000000f0c00 0x0000000df0f400 1
collect_sys_info: 0000000000000be8-00000000000a0000
collect_sys_info: 00000000000c0000-00000000000f0000
collect_sys_info: 00000000000f0c00-000000000e000000
collect_sys_info: RAM 224 MB
relocate: Current location: 0x100000-0x126287
relocate: Relocating to 0xdfd9d70-0xdfffff7... ok
setup_timers: CPU 666 MHz
pci_init: Scanning PCI: found 11 devices
malloc_diag: alloc: 272 bytes (4 blocks), free: 16104 bytes (1 blocks)
pci_init: 00:00.0 1106:3123 0600 00
pci_init: 00:01.0 1106:b091 0604 00
pci_init: 01:00.0 1106:3122 0300 00
pci_init: 00:10.0 1106:3038 0c03 00
pci_init: 00:10.1 1106:3038 0c03 00
pci_init: 00:10.2 1106:3038 0c03 00
pci_init: 00:10.3 1106:3104 0c03 20
pci_init: 00:11.0 1106:3177 0601 00
pci_init: 00:11.1 1106:0571 0101 8a
pci_init: 00:11.5 1106:3059 0401 00
pci_init: 00:12.0 1106:3065 0200 00
Press <Enter> for default boot, or <Esc> for boot prompt... 2 1 timed out
boot: hda1:/vmlinuz initrd=/initrd.gz ramdisk_size=13000 rw root=/dev/ram0 max_loop=16 LABEL=FB video=vesa:ywrap,mtrr vga=0x314 splash=silent MEDIA=hd console=tty0 console=ttyS0,115200
malloc_diag: alloc: 464 bytes (5 blocks), free: 15912 bytes (1 blocks)
malloc_diag: alloc: 480 bytes (6 blocks), free: 15896 bytes (1 blocks)
file_open: dev=hda1, path=/vmlinuz
find_ide_controller: found PCI IDE controller 1106:0571 prog_if=0x8a
find_ide_controller: primary channel: compatibility mode
find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4
ide_software_reset: Waiting for ide0 to become ready for reset... ok
init_drive: Testing for hda
init_drive: Probing for hda
init_drive: LBA mode, sectors=250880
init_drive: Init device params... ok
hda: LBA 128MB: TRANSCEND                               
init_drive: Testing for hdb
init_drive: Probing for hdb
print_status: IDE: status=0x0, err=0x0
init_drive: Testing for hdb
init_drive: Probing for hdb
print_status: IDE: status=0x0, err=0x0
devopen: Partition 1 start 32 length 127968
Mounted fat
malloc_diag: alloc: 464 bytes (5 blocks), free: 15912 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 480 bytes (6 blocks), free: 15896 bytes (1 blocks)
file_open: dev=hda1, path=/vmlinuz
devopen: already open
malloc_diag: alloc: 464 bytes (5 blocks), free: 15912 bytes (1 blocks)
Found Linux version 2.4.22 (root@linux) #4 Sun Dec 18 12:25:32 CET 2005 (protocol 0x203) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000000be8 - 00000000000a0000
set_memory_size: 00000000000c0000 - 00000000000f0000
set_memory_size: 00000000000f0c00 - 000000000e000000
set_memory_size: ramtop=0xe000000
set_memory_size: ext_mem_k=64512, alt_mem_k=228352
parse_command_line: original command line: "initrd=/initrd.gz ramdisk_size=13000 rw root=/dev/ram0 max_loop=16 LABEL=FB video=vesa:ywrap,mtrr vga=0x314 splash=silent MEDIA=hd console=tty0 console=ttyS0,115200"
parse_command_line: kernel command line at 0x91000
malloc_diag: alloc: 488 bytes (6 blocks), free: 15888 bytes (1 blocks)
parse_command_line: initrd=/initrd.gz
parse_command_line: kernel command line (146 bytes): "ramdisk_size=13000 rw root=/dev/ram0 max_loop=16 LABEL=FB video=vesa:ywrap,mtrr vga=0x314 splash=silent MEDIA=hd console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1600 addr=0x100000 size=0xb8038
Loading kernel... ok
file_open: dev=<NULL>, path=/initrd.gz
load_initrd: start=0xdc18000 end=0xdfd96d4
Loading initrd... ok
malloc_diag: alloc: 464 bytes (5 blocks), free: 15912 bytes (1 blocks)
start_linux: eip=0x100000
Jumping to entry point...
Linux version 2.4.22 (root@linux) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #4 Sun Dec 18 12:25:32 CET 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000be8 - 00000000000a0000 (usable)
 BIOS-e820: 0000000000100000 - 000000000e000000 (usable)
224MB LOWMEM available.
hm, page 00000000 reserved twice.
On node 0 totalpages: 57344
zone(0): 4096 pages.
zone(1): 53248 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: ramdisk_size=13000 rw root=/dev/ram0 max_loop=16 LABEL=FB video=vesa:ywrap,mtrr vga=0x314 splash=silent MEDIA=hd console=tty0 console=ttyS0,115200
bootsplash: silent mode.
Initializing CPU#0
Detected 666.364 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1330.38 BogoMIPS
Memory: 220908k/229376k available (977k kernel code, 8080k reserved, 271k data, 268k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 64K (32 bytes/line)
CPU: Centaur VIA Nehemiah stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3123] at 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
RAMDISK driver initialized: 16 RAM disks of 13000K size 1024 blocksize
loop: loaded (max 16 devices)
via-rhine.c:v1.10-LK1.1.19  July-12-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0x1400, 00:40:63:e1:85:a8, IRQ 5.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio
hda: C/H/S=0/0/0 from BIOS ignored
hda: TRANSCEND, CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 250880 sectors (128 MB) w/2KiB Cache, CHS=980/8/32
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 3845k freed
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 268k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
init started:  BusyBox v0.60.5 (2005.09.18-12:18+0000) multi-call binary
/sbin/klogd: invalid option -- c
BusyBox v0.60.5 (2005.09.18-12:18+0000) multi-call binary

Usage: klogd -n

Kernel logger.
Options:
	-n	Run as a foreground process.

/dev/shm on /tmp type tmpfs (rw)
none on /proc type proc (rw)
Starting devfs daemon: /sbin/devfsd /dev
Started device management daemon v1.3.25 for /dev
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
open /dev/fb0: No such file or directory
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
open /dev/fb0: No such file or directory
ln: /usr/lib//libexpat.so: File exists
ln: /usr/lib//libexpat.so.0: File exists
ln: /usr/lib//libexpat.so.0.4.0: File exists
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
VFS: busy inodes on changed media.
mount: /dev/discs/disc0/part1 already mounted or /mnt busy
mount: according to mtab, /dev/ide/host0/bus0/target0/lun0/part1 is already mounted on /mnt
[: True: unknown operand
[: False: unknown operand
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
umount: /cdrom: 
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/(none):0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

XFree86 Version 4.5.0
Release Date: 16 March 2005
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.4.24 i686 [ELF] 
Current Operating System: Linux (none) 2.4.22 #4 Sun Dec 18 12:25:32 CET 2005 i686
Build Date: 16 March 2005
Changelog Date: 16 March 2005
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
Command line: X :0
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (EE) error, (WW) warning,
	(II) informational, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Dec 18 12:45:26 2005
(==) Using config file: "/etc/X11/XF86Config".
(EE) open /dev/fb0: No such file or directory
(EE) No devices detected.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

