I wonder if linuxbios can be made to work on my motherboard. Even without the datasheet.<br><br>lspci -vvv:<br><pre>00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)<br> Subsystem: Elitegroup Computer Systems Unknown device 1884
<br> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-<br> Latency: 8
<br> Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]<br> Capabilities: [80] AGP version 3.5<br> Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2<br> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
<br> Capabilities: [c0] Power Management version 2<br> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-<br><br>00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-<br> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 0
<br> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0<br> I/O behind bridge: 0000f000-00000fff<br> Memory behind bridge: da000000-dcffffff<br> Prefetchable memory behind bridge: d8000000-d9ffffff<br> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
<br> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-<br> Capabilities: [80] Power Management version 2<br> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
<br><br>00:0a.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)<br> Subsystem: Adaptec AHA-2940AU Single<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
<br> Latency: 32 (1000ns min, 1000ns max), Cache Line Size 08<br> Interrupt: pin A routed to IRQ 17<br> Region 0: I/O ports at 9000 [size=256]<br> Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=4K]<br> [virtual] Expansion ROM at 20020000 [disabled] [size=64K]
<br> Capabilities: [dc] Power Management version 1<br> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-<br><br>00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
<br> Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
<br> Latency: 32 (2500ns min, 2500ns max), Cache Line Size 08<br> Interrupt: pin A routed to IRQ 20<br> Region 0: I/O ports at 9400 [size=128]<br> Region 1: Memory at de001000 (32-bit, non-prefetchable) [size=128]<br> [virtual] Expansion ROM at 20000000 [disabled] [size=128K]
<br> Capabilities: [dc] Power Management version 2<br> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)<br> Status: D0 PME-Enable- DSel=0 DScale=2 PME-<br><br>00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
<br> Subsystem: Elitegroup Computer Systems Unknown device 1884<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
<br> Latency: 32<br> Interrupt: pin B routed to IRQ 16<br> Region 0: I/O ports at 9800 [size=8]<br> Region 1: I/O ports at 9c00 [size=4]<br> Region 2: I/O ports at a000 [size=8]<br> Region 3: I/O ports at a400 [size=4]<br>
Region 4: I/O ports at a800 [size=16]<br> Region 5: I/O ports at ac00 [size=256]<br> Capabilities: [c0] Power Management version 2<br> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
<br><br>00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])<br> Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 32
<br> Interrupt: pin A routed to IRQ 16<br> Region 4: I/O ports at b000 [size=16]<br> Capabilities: [c0] Power Management version 2<br> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
<br><br>00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])<br> Subsystem: Elitegroup Computer Systems Unknown device 1884<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
<br> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 32, Cache Line Size 08<br> Interrupt: pin A routed to IRQ 18<br> Region 4: I/O ports at b400 [size=32]
<br> Capabilities: [80] Power Management version 2<br> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-<br><br>00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81) (prog-if 00 [UHCI])<br> Subsystem: Elitegroup Computer Systems Unknown device 1884<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
<br> Latency: 32, Cache Line Size 08<br> Interrupt: pin A routed to IRQ 18<br> Region 4: I/O ports at b800 [size=32]<br> Capabilities: [80] Power Management version 2<br> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-<br><br>00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])<br> Subsystem: Elitegroup Computer Systems Unknown device 1884
<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 32, Cache Line Size 08
<br> Interrupt: pin B routed to IRQ 18<br> Region 4: I/O ports at bc00 [size=32]<br> Capabilities: [80] Power Management version 2<br> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
<br><br>00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])<br> Subsystem: Elitegroup Computer Systems Unknown device 1884<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
<br> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 32, Cache Line Size 08<br> Interrupt: pin B routed to IRQ 18<br> Region 4: I/O ports at c000 [size=32]
<br> Capabilities: [80] Power Management version 2<br> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-<br><br>00:10.4 USB Controller: VIA Technologies, Inc. USB
2.0 (rev 86) (prog-if 20 [EHCI])<br> Subsystem: Elitegroup Computer Systems Unknown device 1884<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
<br> Latency: 32, Cache Line Size 10<br> Interrupt: pin C routed to IRQ 18<br> Region 0: Memory at de002000 (32-bit, non-prefetchable) [size=256]<br> Capabilities: [80] Power Management version 2<br> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-<br><br>00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]<br> Subsystem: Elitegroup Computer Systems Unknown device 1884<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
<br> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 0<br> Capabilities: [c0] Power Management version 2<br> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-<br><br>00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)<br> Subsystem: Elitegroup Computer Systems Unknown device 1884
<br> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Interrupt: pin C routed to IRQ 11
<br> Region 0: I/O ports at c400 [size=256]<br> Capabilities: [c0] Power Management version 2<br> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
<br><br>01:00.0 VGA compatible controller: Matrox Graphics, Inc. G400/G450 (rev 82) (prog-if 00 [VGA])<br> Subsystem: Matrox Graphics, Inc. Millennium G450 Dual Head<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
<br> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 32 (4000ns min, 8000ns max), Cache Line Size 08<br> Interrupt: pin A routed to IRQ 19<br> Region 0: Memory at d8000000 (32-bit, prefetchable) [size=32M]
<br> Region 1: Memory at da000000 (32-bit, non-prefetchable) [size=16K]<br> Region 2: Memory at db000000 (32-bit, non-prefetchable) [size=8M]<br> [virtual] Expansion ROM at da020000 [disabled] [size=128K]<br> Capabilities: [dc] Power Management version 2
<br> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-<br> Capabilities: [f0] AGP version 2.0<br> Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
<br> Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1<br><br></pre><br clear="all"><br>-- <br>SMS Global Ltd Short Message Service For Seafarers