Dear all :<br>
<br>
My linuxbios can jump to kernel now ,but it hang then ,and can't enter in OS.<br>
<br>
Use phoenix bios <br>

==============================
<div>=====<br>
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx<br>
PCI_IDE: unknown IDE controller on PCI bus 00 device 11, VID=1166, DID=0214<br>
PCI_IDE: chipset revision 0<br>
PCI_IDE: not 100% native mode: will probe irqs later<br>
    ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio<br>
PCI_IDE: simplex device:  DMA disabled<br>
ide1: PCI_IDE Bus-Master DMA disabled (BIOS)<br>
PCI_IDE: unknown IDE controller on PCI bus 01 device 70, VID=1166, DID=024b<br>
PCI_IDE: chipset revision 0<br>
PCI_IDE: 100% native mode on irq 5<br>
    ide2: BM-DMA at 0x3000-0x3007, BIOS settings: hde:pio, hdf:pio<br>
    ide3: BM-DMA at 0x3008-0x300f, BIOS settings: hdg:pio, hdh:pio<br>
PCI_IDE: unknown IDE controller on PCI bus 01 device 71, VID=1166, DID=024b<br>
PCI_IDE: chipset revision 0<br>
PCI_IDE: 100% native mode on irq 5<br>
    ide4: BM-DMA at 0x3020-0x3027, BIOS settings: hdi:pio, hdj:pio<br>
    ide5: BM-DMA at 0x3028-0x302f, BIOS settings: hdk:pio, hdl:pio<br>
hda: WDC WD400BB-00FJA0, ATA DISK drive<br>
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14<br>
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63<br>
ide-floppy driver 0.99.newide<br>
Partition check:<br>
 hda: hda1 hda2 hda3<br>
Floppy drive(s): fd0 is 1.44M          <br>
...................................<br>
<br>
Use linuxbios<br>
======================================================<br>
PCI_IDE: unknown IDE controller on PCI bus 00 device 11, VID=1166, DID=0214<br>
PCI_IDE: chipset revision 0<br>
PCI_IDE: not 100% native mode: will probe irqs later<br>
    ide0: BM-DMA at 0x4010-0x4017, BIOS settings: hda:pio, hdb:pio<br>
PCI_IDE: simplex device:  DMA disabled<br>
ide1: PCI_IDE Bus-Master DMA disabled (BIOS)<br>
hda: C/H/S=0/0/0 from BIOS ignored<br>
hda: WDC WD400BB-00FJA0, ATA DISK drive<br>
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14     <br>
<br>
Then it hang here . could anyone tell me whant is the problem ?<br>
<br>
Thank you .<br>
Neil <br>
</div>