<DIV>Hi <IMG src="http://mimg.163.com/js31style/HtmlEditor/face/preview/face0.gif"> </DIV>
<DIV> My MB is dbe61,It can boot from IDE normally.But when I try to get it boot from usb disk,I got the serial output as below.</DIV>
<DIV>How can I fix it?Any suggestions?</DIV>
<DIV> thanks :)</DIV>
<DIV> </DIV>
<DIV>FILO version 0.5 (<A href="mailto:root@localhost.localdomain">root@localhost.localdomain</A>) Tue Feb 27 10:48:56 CST 2007<BR>collect_sys_info: boot eax = 0xe1fb007<BR>collect_sys_info: boot ebx = 0x77b65e0<BR>collect_sys_info: boot arg = 0x77b65e0<BR>malloc_diag: alloc: 0 bytes (0 blocks), free: 65528 bytes (1 blocks)<BR>malloc_diag: alloc: 24 bytes (1 blocks), free: 65504 bytes (1 blocks)<BR>malloc_diag: alloc: 40 bytes (2 blocks), free: 65488 bytes (1 blocks)<BR>collect_linuxbios_info: Searching for LinuxBIOS tables...<BR>find_lb_table: Found canidate at: 00000530<BR>find_lb_table: header checksum o.k.<BR>find_lb_table: table checksum o.k.<BR>find_lb_table: record count o.k.<BR>collect_linuxbios_info: Found LinuxBIOS table at: 00000530<BR>malloc_diag: alloc: 112 bytes (3 blocks), free: 65416 bytes (1 blocks)<BR>convert_memmap: 0x00000000000000 0x00000000000728 16<BR>convert_memmap: 0x00000000000728 0x0000000009f8d8 1<BR>convert_memmap: 0x000000000f0000 0x00000000010000 16<BR>convert_memmap: 0x00000000100000 0x000000076c0000 1<BR>collect_sys_info: 0000000000000728-00000000000a0000<BR>collect_sys_info: 0000000000100000-00000000077c0000<BR>collect_sys_info: RAM 119 MB<BR>pci_init: Scanning PCI: found 14 devices<BR>malloc_diag: alloc: 288 bytes (4 blocks), free: 65240 bytes (1 blocks)<BR>pci_init: 00:01.0 1022:2080 0600 00<BR>pci_init: 00:01.1 1022:2081 0300 00<BR>pci_init: 00:01.2 1022:2082 1010 00<BR>pci_init: 00:0b.0 1106:3044 0c00 10<BR>pci_init: 00:0c.0 1106:3106 0200 00<BR>pci_init: 00:0d.0 1106:3106 0200 00<BR>pci_init: 00:0e.0 168c:0013 0200 00<BR>pci_init: 00:0f.0 1022:2090 0601 00<BR>pci_init: 00:0f.2 1022:209a 0101 80<BR>pci_init: 00:0f.3 1022:2093 0401 00<BR>pci_init: 00:0f.4 1022:2094 0c03 10<BR>pci_init: 00:0f.5 1022:2095 0c03 20<BR>pci_init: 00:0f.6 1022:2096 0c03 fe<BR>pci_init: 00:0f.7 1022:2097 0c03 80<BR>Press <Enter> for default boot, or <Esc> for boot prompt... 2 1 timed out<BR>boot: uda1:/boot/vmlinuz-2.6.15-1.2054_FC5 initrd=uda1:/boot/initrd-2.6.15-1.2054_FC5.img root=/dev/sda1 console=tty0 console=ttyS0,115200<BR>malloc_diag: alloc: 432 bytes (5 blocks), free: 65096 bytes (1 blocks)<BR>malloc_diag: alloc: 448 bytes (6 blocks), free: 65080 bytes (1 blocks)<BR>LinuxLabs USB bootloader<BR>ohc_init: ohc_init num_controllers=0 ohci=121300<BR>malloc_diag: alloc: 968 bytes (7 blocks), free: 64560 bytes (1 blocks)<BR>malloc_diag: alloc: 4048 bytes (8 blocks), free: 61480 bytes (1 blocks)<BR>malloc_diag: alloc: 4208 bytes (9 blocks), free: 61320 bytes (1 blocks)<BR>malloc_diag: alloc: 4272 bytes (10 blocks), free: 61256 bytes (1 blocks)<BR>ohc_init: Found OHCI at f69a3670<BR>ohc_reset: Resetting OHCI<BR>ohc_reset: USB HC reset_hc usb-f69a3670: ctrl = 0x0 <BR>ohc_start: Starting OHCI <BR>malloc_diag: alloc: 7352 bytes (11 blocks), free: 58176 bytes (1 blocks)<BR>poll_usb: poll_usb1 i=0 poll_o_root_hub1 v=00010101 port = f69a36c4, controller = 0<BR>poll_o_root_hub: poll_o_root_hub2 v=00010101 poll_o_root_hub21 v=00010101 Connection on port f69a36c4<BR>New USB device, setting address 2<BR>dma_to_td: can not find td<BR>dma_to_td: can not find td<BR>.RET URB:[ 0] dev: 0,ep: 0-O,type:CTRL,flags: 0,len:0/0,stat:-115(ffffff8d)<BR>ohci.c: cmd(8): 00 00 00 f2 90 e9 67 07<BR>configure_device: Fetching device descriptor length<BR>dma_to_td: can not find td<BR>.RET URB:[ 0] dev: 2,ep: 0-I,type:CTRL,flags: 0,len:0/8,stat:-115(ffffff8d)<BR>ohci.c: cmd(8): 80 06 00 01 00 00 08 00<BR>ohci.c: data(0/8): stat:-115<BR>configure_device: Fetching device descriptor<BR>dma_to_td: can not find td<BR>.RET URB:[ 0] dev: 2,ep: 0-I,type:CTRL,flags: 0,len:0/0,stat:-115(ffffff8d)<BR>ohci.c: cmd(8): 80 06 00 01 00 00 00 00<BR>configure_device: Fetching config descriptor length<BR>dma_to_td: can not find td<BR>.RET URB:[ 0] dev: 2,ep: 0-I,type:CTRL,flags: 0,len:0/8,stat:-115(ffffff8d)<BR>ohci.c: cmd(8): 80 06 00 02 00 00 08 00<BR>ohci.c: data(0/8): stat:-115<BR>configure_device: Fetching config descriptor<BR>dma_to_td: can not find td<BR>.RET URB:[ 0] dev: 2,ep: 0-I,type:CTRL,flags: 0,len:0/0,stat:-115(ffffff8d)<BR>ohci.c: cmd(8): 80 06 00 02 00 00 00 00<BR>configure_device: device:<BR>dump_device_descriptor: bLength: 00<BR>dump_device_descriptor: type: 00<BR>dump_device_descriptor: bcdVersion: 00<BR>dump_device_descriptor: Class: 00<BR>dump_device_descriptor: SubClass: 00<BR>dump_device_descriptor: protocol: 00<BR>dump_device_descriptor: max_packet: 0<BR>dump_device_descriptor: idVendor: 0000<BR>dump_device_descriptor: idProduct: 0000<BR>dump_device_descriptor: bcdDeviceVersion: 00<BR>dump_device_descriptor: iManufacturor: 00<BR>dump_device_descriptor: iProduct: 00<BR>dump_device_descriptor: iSerial: 00<BR>dump_device_descriptor: bNumConfig: 00<BR>configure_device: config:<BR>dump_config_descriptor: bLength: 00<BR>dump_config_descriptor: type: 00<BR>dump_config_descriptor: wTotalLength: 0000<BR>dump_config_descriptor: bNumInterfaces: 00<BR>dump_config_descriptor: bConfigurationValue: 00<BR>dump_config_descriptor: iConfiguration: 00<BR>dump_config_descriptor: bmAttributes: 00<BR>dump_config_descriptor: bMaxPower: 00<BR>dump_config_descriptor: <BR>Interface(140ee7):<BR>dump_interface_descriptor: bLength: 00<BR>dump_interface_descriptor: type: 00<BR>dump_interface_descriptor: bInterfaceNumber: 00<BR>dump_interface_descriptor: bAlternateSetting: 00<BR>dump_interface_descriptor: bNumEndpoints: 00<BR>dump_interface_descriptor: bInterfaceClass: 00<BR>dump_interface_descriptor: bInterfaceSubClass: 00<BR>dump_interface_descriptor: bInterfaceProtocol: 00<BR>dump_interface_descriptor: iInterface: 00<BR>configure_device: Selecting Configuration number 0:<BR>dma_to_td: can not find td<BR>.RET URB:[ 0] dev: 2,ep: 0-O,type:CTRL,flags: 0,len:0/0,stat:-115(ffffff8d)<BR>ohci.c: cmd(8): 00 09 00 00 00 00 00 00<BR>00:00:00<BR>dma_to_td: can not find td<BR>.RET URB:[ 0] dev: 2,ep: 0-I,type:CTRL,flags: 0,len:0/4,stat:-115(ffffff8d)<BR>ohci.c: cmd(8): 80 06 00 03 00 00 04 00<BR>ohci.c: data(0/4): stat:-115<BR>dma_to_td: can not find td<BR>.RET URB:[ 0] dev: 2,ep: 0-I,type:CTRL,flags: 0,len:0/255,stat:-115(ffffff8d)<BR>ohci.c: cmd(8): 80 06 00 03 00 0f ff 00<BR>ohci.c: data(0/255): stat:-115<BR>Manufacturor: USB<BR>dma_to_td: can not find td<BR>.RET URB:[ 0] dev: 2,ep: 0-I,type:CTRL,flags: 0,len:0/255,stat:-115(ffffff8d)<BR>ohci.c: cmd(8): 80 06 00 03 00 0f ff 00<BR>ohci.c: data(0/255): stat:-115<BR>Product: B<BR>dma_to_td: can not find td<BR>.RET URB:[ 0] dev: 2,ep: 0-I,type:CTRL,flags: 0,len:0/255,stat:-115(ffffff8d)<BR>ohci.c: cmd(8): 80 06 00 03 00 0f ff 00<BR>ohci.c: data(0/255): stat:-115<BR>Serial: <BR>configure_device: DEVICE CONFIGURED<BR>OHCI controller usb-f69a3670 state<BR>control: 0x00000093 HCFS=operational CLE CBSR=3<BR>cmdstatus: 0x00000000 SOC=0<BR>intrstatus: 0x00000044 RHSC SF<BR>intrenable: 0x80000013 MIE UE WDH SO<BR>ed_controlhead 077ac390<BR>hcca frame #0000<BR>roothub.a: 10000a04 POTPGT=16 OCPM NPS NDP=4<BR>roothub.b: 00000000 PPCM=0000 DR=0000<BR>roothub.status: 00000000<BR>roothub.portstatus [0] = 0x00000103 PPS PES CCS<BR>roothub.portstatus [1] = 0x00000100 PPS<BR>roothub.portstatus [2] = 0x00000100 PPS<BR>roothub.portstatus [3] = 0x00000100 PPS<BR>dma_to_td: can not find td<BR>.RET URB:[ 0] dev: 2,ep: 0-I,type:CTRL,flags: 0,len:0/1,stat:-115(ffffff8d)<BR>ohci.c: cmd(8): a1 fe 00 00 00 00 01 00<BR>ohci.c: data(0/1): stat:-115<BR>poll_o_root_hub: poll_o_root_hub1 v=00000100 port = f69a36c8, controller = 0<BR>poll_o_root_hub: poll_o_root_hub1 v=00000100 port = f69a36cc, controller = 0<BR>poll_o_root_hub: poll_o_root_hub1 v=00000100 port = f69a36d0, controller = 0<BR>poll_usb: poll_usb1 i=0 poll_o_root_hub1 v=00000103 port = f69a36c4, controller = 0<BR>poll_o_root_hub: poll_o_root_hub1 v=00000100 port = f69a36c8, controller = 0<BR>poll_o_root_hub: poll_o_root_hub1 v=00000100 port = f69a36cc, controller = 0<BR>poll_o_root_hub: poll_o_root_hub1 v=00000100 port = f69a36d0, controller = 0<BR>malloc_diag: alloc: 7336 bytes (10 blocks), free: 58192 bytes (2 blocks)<BR>malloc_diag: alloc: 7192 bytes (9 blocks), free: 58336 bytes (2 blocks)<BR>boot: uda1:/boot/vmlinuz-2.6.15-1.2054_FC5 initrd=uda1:/boot/initrd-2.6.15-1.2054_FC5.img root=/dev/sda1 console=tty0 console=ttyS0,115200</DIV>
<DIV> </DIV><br><!-- footer --><br><hr>
<a style="font-size:12px;line-height:15px; color:#000; text-decoration:none" href="http://www.126.com/" target="_blank">想加入吗？1.9亿用户正在使用网易邮箱 <span style="font-family:Tahoma; text-decoration:underline; color:blue">www.126.com</span> </a>