# !!! NOTE !!!
# Do NOT add spaces or comments at the end of option lines.
# It confuses some versions of make.

# Use grub instead of autoboot?
#USE_GRUB = 1

# Grub menu.lst path
#MENULST_FILE = "hda3:/boot/filo/menu.lst"
# Via Epia-MII CF boot:
#MENULST_FILE = "hde1:/boot/filo/menu.lst"

# time before default menu.lst is chosen. Set to 0 to ignore
#MENULST_TIMEOUT = 0

# Image filename for automatic boot and optional command line parameter
AUTOBOOT_FILE = "hde1:/bzImage console=ttyS0,115200"
#AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200"
#AUTOBOOT_FILE = "mem@0xfff80000"
#AUTOBOOT_FILE = "hde1@0"
#AUTOBOOT_FILE = "uda1:/vmlinuz.elf"

# Time in second before booting AUTOBOOT_FILE
AUTOBOOT_DELAY = 2

# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
IDE_DISK = 1

# Add a short delay when polling status registers 
# (required on some broken SATA controllers)
# NOTE: Slows down access significantly, so disable 
# whenever possible.
#IDE_DISK_POLL_DELAY = 1

# Use PCMCIA compact flash on Via Epia MII10000 and MII6000E
# This device is referred to as hde.
PCMCIA_CF = 1

# Driver for USB Storage
USB_DISK = 1

# VGA text console
#VGA_CONSOLE = 1
#PC_KEYBOARD = 1

# Serial console 
SERIAL_CONSOLE = 1
SERIAL_IOBASE = 0x3f8
# if SERIAL_SPEED is commented out, the speed will not be changed.
#SERIAL_SPEED = 115200

# Filesystems
FSYS_EXT2FS = 1
FSYS_FAT = 1
#FSYS_JFS = 1
#FSYS_MINIX = 1
#FSYS_REISERFS = 1
#FSYS_XFS = 1
FSYS_ISO9660 = 1

# Support for boot disk image in bootable CD-ROM (El Torito)
ELTORITO = 1

# PCI support
SUPPORT_PCI = 1

# Enable this to scan PCI busses above bus 0
# AMD64 based boards do need this.
PCI_BRUTE_SCAN = 1

# Sound support (needs SUPPORT_PCI)
#SUPPORT_SOUND = 1

# Sound drivers
#VIA_SOUND = 1

# Debugging
DEBUG_ALL = 1
#DEBUG_ELFBOOT = 1
#DEBUG_ELFNOTE = 1
#DEBUG_LINUXBIOS = 1
#DEBUG_MALLOC = 1
#DEBUG_MULTIBOOT = 1
#DEBUG_SEGMENT = 1
#DEBUG_SYS_INFO = 1
#DEBUG_TIMER = 1
#DEBUG_BLOCKDEV = 1
#DEBUG_PCI = 1
#DEBUG_VIA_SOUND = 1
#DEBUG_LINUXLOAD = 1
#DEBUG_IDE = 1
#DEBUG_USB = 1
#DEBUG_ELTORITO = 1

# i386 options

# Loader for standard Linux kernel image, a.k.a. /vmlinuz
LINUX_LOADER = 1

# Boot FILO from Multiboot loader (eg. GRUB)
#MULTIBOOT_IMAGE = 1

