LinuxBIOS-2.0.0_Fallback Fri Apr 27 19:52:00 CST 2007 starting... *sysinfo range: [000cf000,000cf730) bsp_apicid=00 01 nodes initialized. core0 started: SBLink=00 NC node|link=00 begin msr fid, vid 3106121206100202 set vid failed for apicid =00 end msr fid, vid 3106120606100210 ht reset - LinuxBIOS-2.0.0_Fallback Fri Apr 27 19:52:00 CST 2007 starting... *sysinfo range: [000cf000,000cf730) bsp_apicid=00 01 nodes initialized. core0 started: SBLink=00 NC node|link=00 begin msr fid, vid 3106120606100210 end msr fid, vid 3106120606100210 SMBus controller enabled Ram1.00 Ram2.00 device=00000650 SPD_MEM_TYPE=00000008 device=00000651 SPD_MEM_TYPE=fffffffd device=00000652 SPD_MEM_TYPE=fffffffd device=00000653 SPD_MEM_TYPE=fffffffd device=00000654 SPD_MEM_TYPE=fffffffd device=00000655 SPD_MEM_TYPE=fffffffd device=00000656 SPD_MEM_TYPE=fffffffd device=00000657 SPD_MEM_TYPE=fffffffd Registered 333Mhz Interleaved RAM: 0x00100000 KB Ram3 Initializing memory: done Setting variable MTRR 02, base: 0000MB, range: 0400MB, type WB DQS Training:RcvrEn:Pass1: 00 train_DqsRcvrEn: begin ctrl 00000000 TrainRcvEn: 0 ctrl00000000 CTLRMaxDelay=0a train_DqsRcvrEn: end ctrl 00000000 done DQS Training:DQSPos: 00 train_DqsPos: begin ctrl 00000000 TrainDQSRdWrPos: 0 ctrl 00000000 TrainDQSRdWrPos: 00000005 train_DqsPos: end ctrl 00000000 done DQS Training:RcvrEn:Pass2: 00 train_DqsRcvrEn: begin ctrl 00000000 TrainRcvEn: 0 ctrl00000000 CTLRMaxDelay=27 train_DqsRcvrEn: end ctrl 00000000 done DQS Training:tsc[00]=000000001c832ece DQS Training:tsc[01]=0000000020a63182 DQS Training:tsc[02]=0000000020b1efcc DQS Training:tsc[03]=000000017b8acb51 DQS Training:tsc[04]=0000000180d7ae33 Ram4 v_esp=000cefe4 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying LinuxBIOS to RAM. src=fffe0000 dst=00100000 linxbios_ram.nrv2b length = 0000d3d7 linxbios_ram.bin length = 00022450 Jumping to LinuxBIOS. LinuxBIOS-2.0.0_Fallback Fri Apr 27 19:52:00 CST 2007 booting... Enumerating buses... APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 00:00.0 [1166/0130] enabled PCI: 00:06.0 [1166/0130] enabled next_unitid: 000c PCI: 00:00.0 subbordinate bus PCI-X PCI: 00:00.0 [1166/0036] enabled PCI: 00:0c.0 [1166/0036] enabled next_unitid: 000f PCI: pci_scan_bus for bus 00 PCI: 00:01.0 [1166/0036] enabled PCI: 00:02.0 [1166/0205] enabled PCI: 00:02.1 [1166/0214] enabled PCI: 00:02.2 [1166/0234] enabled PCI: 00:02.3 [1166/0238] enabled PCI: 00:02.4 [1166/0235] enabled PCI: 00:02.5 [1166/0235] enabled PCI: 00:02.6 [1166/0235] enabled PCI: 00:03.0 [1166/0223] enabled PCI: 00:03.1 [1166/0223] enabled PCI: 00:03.2 [1166/0223] enabled PCI: 00:04.0 [8086/1229] enabled PCI: 00:06.0 [1166/0130] enabled PCI: 00:07.0 [1166/0130] enabled PCI: 00:08.0 [1166/0132] enabled PCI: 00:09.0 [1166/0132] enabled PCI: 00:0a.0 [1166/0132] enabled PCI: 00:0b.0 [1166/0132] enabled PCI: 00:0c.0 [1002/515e] enabled PCI: pci_scan_bus for bus 01 PCI: 01:0d.0 subbordinate bus PCI-X PCI: 01:0d.0 [1166/0104] enabled PCI: 01:0e.0 [1166/024a] enabled PCI: 01:0e.1 [1166/024a] enabled PCI: pci_scan_bus for bus 02 PCI: pci_scan_bus returning with max=002 PCI: 02: Conventional PCI PCI: pci_scan_bus returning with max=002 PCI: 01: 133MHz PCI-X PCI: pci_scan_bus for bus 03 PCI: pci_scan_bus returning with max=003 PCI: pci_scan_bus for bus 04 PCI: 04:04.0 [14e4/166a] enabled PCI: 04:04.1 [14e4/166a] enabled PCI: pci_scan_bus returning with max=004 PCI: pci_scan_bus for bus 05 PCI: pci_scan_bus returning with max=005 PCI: pci_scan_bus for bus 06 PCI: pci_scan_bus returning with max=006 PCI: pci_scan_bus for bus 07 PCI: pci_scan_bus returning with max=007 PCI: pci_scan_bus for bus 08 PCI: pci_scan_bus returning with max=008 PCI: pci_scan_bus returning with max=008 PCI: pci_scan_bus returning with max=008 done Allocating resources... Reading resources... PCI: 01:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io PCI: 01:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem PCI: 01:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem PCI: 00:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 01 prefmem PCI: 00:06.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io PCI: 00:06.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem PCI: 00:07.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io PCI: 00:07.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem PCI: 00:08.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io PCI: 00:08.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem PCI: 00:08.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem PCI: 00:09.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io PCI: 00:09.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem PCI: 00:09.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 08 io PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 08 prefmem PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 08 mem PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:06.0 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:06.0 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:06.0 missing read_resources Done reading resources. Allocating VGA resource PCI: 00:0c.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device PCI: 00:18.0 1b8 <- [0x00f0000000 - 0x00f7ffffff] prefmem PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io PCI: 00:18.0 1b0 <- [0x00fc000000 - 0x00fc2fffff] mem PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:06.0 missing read_resources PCI: 00:18.0 1da <- [0x0000004000 - 0x0000003fff] io PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:06.0 missing read_resources PCI: 00:18.0 1aa <- [0x00fc300000 - 0x00fc2fffff] prefmem PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:06.0 missing read_resources PCI: 00:18.0 1a2 <- [0x00fc300000 - 0x00fc2fffff] mem PCI: 00:01.0 1c <- [0x0000001000 - 0x0000001fff] bus 01 io PCI: 00:01.0 20 <- [0x00fc000000 - 0x00fc0fffff] bus 01 mem PCI: 01:0e.0 10 <- [0x0000001030 - 0x0000001037] io PCI: 01:0e.0 14 <- [0x0000001070 - 0x0000001073] io PCI: 01:0e.0 18 <- [0x0000001040 - 0x0000001047] io PCI: 01:0e.0 1c <- [0x0000001080 - 0x0000001083] io PCI: 01:0e.0 20 <- [0x0000001000 - 0x000000101f] io PCI: 01:0e.0 24 <- [0x00fc020000 - 0x00fc021fff] mem PCI: 01:0e.0 30 <- [0x00fc000000 - 0x00fc01ffff] romem PCI: 01:0e.1 10 <- [0x0000001050 - 0x0000001057] io PCI: 01:0e.1 14 <- [0x0000001090 - 0x0000001093] io PCI: 01:0e.1 18 <- [0x0000001060 - 0x0000001067] io PCI: 01:0e.1 1c <- [0x00000010a0 - 0x00000010a3] io PCI: 01:0e.1 20 <- [0x0000001020 - 0x000000102f] io PCI: 00:02.0 90 <- [0x0000003040 - 0x000000304f] io PCI: 00:02.1 10 <- [0x0000003060 - 0x0000003067] io PCI: 00:02.1 14 <- [0x0000003080 - 0x0000003083] io PCI: 00:02.1 18 <- [0x0000003070 - 0x0000003077] io PCI: 00:02.1 1c <- [0x0000003090 - 0x0000003093] io PCI: 00:02.1 20 <- [0x0000003050 - 0x000000305f] io PCI: 00:02.1 64 <- [0x00000030a0 - 0x00000030a3] io PCI: 00:02.3 10 <- [0x00fc250000 - 0x00fc250fff] mem PCI: 00:02.4 10 <- [0x00fc251000 - 0x00fc251fff] mem PCI: 00:02.5 10 <- [0x00fc252000 - 0x00fc252fff] mem PCI: 00:02.6 10 <- [0x00fc253000 - 0x00fc253fff] mem PCI: 00:03.0 10 <- [0x00fc254000 - 0x00fc254fff] mem PCI: 00:03.0 14 <- [0x0000002000 - 0x00000020ff] io PCI: 00:03.1 10 <- [0x00fc255000 - 0x00fc255fff] mem PCI: 00:03.1 14 <- [0x0000002400 - 0x00000024ff] io PCI: 00:03.2 10 <- [0x00fc256000 - 0x00fc256fff] mem PCI: 00:03.2 14 <- [0x0000002800 - 0x00000028ff] io PCI: 00:04.0 10 <- [0x00fc257000 - 0x00fc257fff] mem PCI: 00:04.0 14 <- [0x0000003000 - 0x000000303f] io PCI: 00:04.0 18 <- [0x00fc200000 - 0x00fc21ffff] mem PCI: 00:07.0 20 <- [0x00fc100000 - 0x00fc1fffff] bus 04 mem PCI: 04:04.0 10 <- [0x00fc100000 - 0x00fc10ffff] mem64 PCI: 04:04.0 18 <- [0x00fc110000 - 0x00fc11ffff] mem64 PCI: 04:04.1 10 <- [0x00fc120000 - 0x00fc12ffff] mem64 PCI: 04:04.1 18 <- [0x00fc130000 - 0x00fc13ffff] mem64 PCI: 00:0c.0 10 <- [0x00f0000000 - 0x00f7ffffff] prefmem PCI: 00:0c.0 14 <- [0x0000002c00 - 0x0000002cff] io PCI: 00:0c.0 18 <- [0x00fc240000 - 0x00fc24ffff] mem PCI: 00:0c.0 30 <- [0x00fc220000 - 0x00fc23ffff] romem PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem Done setting resources. Done allocating resources. Enabling resources... PCI: 00:18.0 cmd <- 140 PCI: 00:01.0 bridge ctrl <- 0003 PCI: 00:01.0 cmd <- 147 PCI: 01:0d.0 bridge ctrl <- 0003 PCI: 01:0d.0 cmd <- 140 PCI: 01:0e.0 cmd <- 143 PCI: 01:0e.1 cmd <- 141 PCI: 00:02.0 cmd <- 147 PCI: 00:02.1 cmd <- 141 PCI: 00:02.2 cmd <- 144 PCI: 00:02.3 cmd <- 146 PCI: 00:02.4 cmd <- 146 PCI: 00:02.5 cmd <- 146 PCI: 00:02.6 cmd <- 146 PCI: 00:03.0 cmd <- 143 PCI: 00:03.1 cmd <- 143 PCI: 00:03.2 cmd <- 143 PCI: 00:04.0 cmd <- 143 PCI: 00:06.0 bridge ctrl <- 0003 PCI: 00:06.0 cmd <- 140 PCI: 00:07.0 bridge ctrl <- 0003 PCI: 00:07.0 cmd <- 146 PCI: 04:04.0 cmd <- 142 PCI: 04:04.1 cmd <- 142 PCI: 00:08.0 bridge ctrl <- 0003 PCI: 00:08.0 cmd <- 140 PCI: 00:09.0 bridge ctrl <- 0003 PCI: 00:09.0 cmd <- 140 PCI: 00:0a.0 bridge ctrl <- 0003 PCI: 00:0a.0 cmd <- 140 PCI: 00:0b.0 bridge ctrl <- 0003 PCI: 00:0b.0 cmd <- 140 PCI: 00:0c.0 cmd <- 1c3 PCI: 00:00.0 missing enable_resources PCI: 00:01.0 missing enable_resources PCI: 00:02.0 missing enable_resources PCI: 00:03.0 missing enable_resources PCI: 00:04.0 missing enable_resources PCI: 00:05.0 missing enable_resources PCI: 00:06.0 missing enable_resources PCI: 00:18.1 subsystem <- 1022/2b80 PCI: 00:18.1 cmd <- 140 PCI: 00:18.2 subsystem <- 1022/2b80 PCI: 00:18.2 cmd <- 140 PCI: 00:18.3 cmd <- 140 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init start_eip=0x00006000, offset=0x00110000, code_size=0x0000005b Initializing CPU #1 Initializing CPU #0 CPU: vendor AMD device 40f12 CPU: vendor AMD device 40f12 CPU: family 0f, model 41, stepping 02 CPU: family 0f, model 41, stepping 02 brandId=0351 brandId=0351 Enabling cache Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB DONE variable MTRRs Clear out the extra MTRR's DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled CPU model AMD Opteron(tm) Processor 172 CPU model AMD Opteron(tm) Processor 172 Setting up local apic...Setting up local apic... apic_id: 0x00 done. apic_id: 0x01 done. Clearing memory 2048K - 1048576K: CPU #1 Initialized --------------- done CPU #0 Initialized All AP CPUs stopped PCI: 00:18.0 init PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:02.0 init PCI: 00:02.1 init PCI: 00:02.2 init RTC Init RTC: Checksum invalid zeroing cmos Invalid CMOS LB checksum PCI: 00:02.3 init PCI: 00:02.4 init PCI: 00:02.5 init PCI: 00:02.6 init PCI: 00:03.0 init PCI: 00:03.1 init PCI: 00:03.2 init PCI: 00:04.0 init PCI: 00:08.0 init PCI: 00:09.0 init PCI: 00:0a.0 init PCI: 00:0b.0 init PCI: 00:0c.0 init rom address for PCI: 00:0c.0 = fc220000 Incorrect Expansion ROM Header Signature 7070 PCI: 01:0e.0 init init PHY... port 0 PHY status = 04 after reset port 0 PHY status = 04 port 1 PHY status = 04 after reset port 1 PHY status = 04 port 2 PHY status = 04 after reset port 2 PHY status = 04 port 3 PHY status = 04 after reset port 3 PHY status = 04 PCI: 01:0e.1 init PCI: 04:04.0 init PCI: 04:04.1 init Devices initialized bus_isa=4 bus_isa=5 bus_isa=6 bus_isa=7 bus_isa=8 bus_isa=9 Writing IRQ routing tables to 0xf0000...done. Wrote the mp table end at: 00000020 - 0000024c Moving GDT to 0x500...ok Wrote linuxbios table at: 00000530 - 00000de8 checksum f1b2 Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfffc0000 - 0xfffdffff Found ELF candidate at offset 0 New segment addr 0x100000 size 0x3de70 offset 0xc0 filesize 0x14328 (cleaned up) New segment addr 0x100000 size 0x3de70 offset 0xc0 filesize 0x14328 New segment addr 0x13de80 size 0x48 offset 0x14400 filesize 0x48 (cleaned up) New segment addr 0x13de80 size 0x48 offset 0x14400 filesize 0x48 Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x000000003ff68000 memsz: 0x000000000003de70 filesz: 0x00 00000000014328 Clearing Segment: addr: 0x000000003ff7c328 memsz: 0x0000000000029b48 Loading Segment: addr: 0x000000003ffa5e80 memsz: 0x0000000000000048 filesz: 0x00 00000000000048 FILO 0.5 [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename.] grub>