Thanks Marc,<br><br>   I will try buildrom.<br><br>Regards,<br><br>Otavio<br><br><div><span class="gmail_quote">On 5/23/07, <b class="gmail_sendername">Marc Jones</b> <<a href="mailto:marc.jones@amd.com">marc.jones@amd.com
</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><br><br>Otávio Alcântara wrote:<br>> I used a dissambly and there is no jump in the reset vector. I've tried
<br>> other board (amd  rumba, using the same tools JTAG and memory<br>> programmer) and it starts normaly the boot process, just don't finish it<br>> because the processor is a Geode GX and my board is a LX one. I'll try
<br>> the norwich board that is similar to mine.<br>> The problem I saw with msm800 is that linuxbios.rom is not on a valid<br>> format, the file doesn't size like the ROM_SIZE option of<br>> targets/../../Config.lb.
<br>><br>> Thanks,<br>><br>> Otávio<br>><br><br><br>Are you using buildrom?<br><br><a href="http://linuxbios.org/Buildrom">http://linuxbios.org/Buildrom</a><br><br>It is recommended to use it for LX systems. It should handle putting the
<br>VSA image with the LB binary to make the complete image.<br>Marc<br><br><br><br><br>> On 5/23/07, *ron minnich* <<a href="mailto:rminnich@gmail.com">rminnich@gmail.com</a><br>> <mailto:<a href="mailto:rminnich@gmail.com">
rminnich@gmail.com</a>>> wrote:<br>><br>>     The first thing I ever do with problems of this type is simple:<br>>     hexdump romimage<br>><br>>     and see if I see a jump at end.<br>><br>>     ron
<br>><br>><br>><br>><br>> --<br>> Otávio Alcântara<br>> "I'll never cross to the Dark Side."<br>><br><br>--<br>Marc Jones<br>Senior Software Engineer<br>(970) 226-9684 Office<br>mailto:
<a href="mailto:Marc.Jones@amd.com">Marc.Jones@amd.com</a><br><a href="http://www.amd.com/embeddedprocessors">http://www.amd.com/embeddedprocessors</a><br><br><br></blockquote></div><br><br clear="all"><br>-- <br>Otávio Alcântara
<br>"I'll never cross to the Dark Side."