?

LinuxBIOS-2.0.0_Fallback Thu Jul  5 19:54:34 CST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
01 nodes initialized.
core0 started:
SBLink=00
NC node|link=00
begin msr fid, vid 310a12120a0e0202
end   msr fid, vid 310a120a0a0e020e
ht reset -


LinuxBIOS-2.0.0_Fallback Thu Jul  5 19:54:34 CST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
01 nodes initialized.
core0 started:
SBLink=00
NC node|link=00
begin msr fid, vid 310a120a0a0e020e
end   msr fid, vid 310a120a0a0e020e
SMBus controller enabled
Ram1.00
Ram2.00
device=00000650
SPD_MEM_TYPE=00000008
device=00000651
SPD_MEM_TYPE=fffffffd
device=00000652
SPD_MEM_TYPE=fffffffd
device=00000653
SPD_MEM_TYPE=fffffffd
device=00000654
SPD_MEM_TYPE=fffffffd
device=00000655
SPD_MEM_TYPE=fffffffd
device=00000656
SPD_MEM_TYPE=fffffffd
device=00000657
SPD_MEM_TYPE=fffffffd
Registered
333Mhz
Interleaved
RAM: 0x00100000 KB
Ram3
Initializing memory:  done
Setting variable MTRR 02, base: 0000MB, range: 0400MB, type WB
DQS Training:RcvrEn:Pass1: 00
train_DqsRcvrEn: begin ctrl 00000000

TrainRcvEn: 0 ctrl00000000
 CTLRMaxDelay=0a
train_DqsRcvrEn: end ctrl 00000000
 done
DQS Training:DQSPos: 00
train_DqsPos: begin ctrl 00000000

TrainDQSRdWrPos: 0 ctrl 00000000
TrainDQSRdWrPos: 00000005

train_DqsPos: end ctrl 00000000
 done
DQS Training:RcvrEn:Pass2: 00
train_DqsRcvrEn: begin ctrl 00000000

TrainRcvEn: 0 ctrl00000000
 CTLRMaxDelay=26
train_DqsRcvrEn: end ctrl 00000000
 done
DQS Training:tsc[00]=000000004fcd53f6
DQS Training:tsc[01]=000000005303779d
DQS Training:tsc[02]=000000008c7fb34e
DQS Training:tsc[03]=00000006799964d7
DQS Training:tsc[04]=000000067e4d7b60
Ram4
v_esp=000cefc8
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to RAM.
src=fffe0000
dst=00100000
linxbios_ram.nrv2b length = 0000c57e
linxbios_ram.bin   length = 0001fb50
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0_Fallback Thu Jul  5 19:54:34 CST 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
  PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [1166/0130] enabled
PCI: 00:06.0 [1166/0130] enabled next_unitid: 000c
PCI: 00:00.0 subbordinate bus PCI-X
PCI: 00:00.0 [1166/0036] enabled
PCI: 00:0c.0 [1166/0036] enabled next_unitid: 000f
PCI: pci_scan_bus for bus 00
PCI: 00:01.0 [1166/0036] enabled
PCI: 00:02.0 [1166/0205] enabled
PCI: 00:02.1 [1166/0214] enabled
PCI: 00:02.2 [1166/0234] enabled
PCI: 00:02.3 [1166/0238] enabled
PCI: 00:02.4 [1166/0235] enabled
PCI: 00:02.5 [1166/0235] enabled
PCI: 00:02.6 [1166/0235] enabled
PCI: 00:03.0 [1166/0223] enabled
PCI: 00:03.1 [1166/0223] enabled
PCI: 00:03.2 [1166/0223] enabled
PCI: 00:04.0 [8086/1229] enabled
PCI: 00:06.0 [1166/0130] enabled
PCI: 00:07.0 [1166/0130] enabled
PCI: 00:08.0 [1166/0132] enabled
PCI: 00:09.0 [1166/0132] enabled
PCI: 00:0a.0 [1166/0132] enabled
PCI: 00:0b.0 [1166/0132] enabled
PCI: 00:0c.0 [1002/515e] enabled
PCI: pci_scan_bus for bus 01
PCI: 01:0d.0 subbordinate bus PCI-X
PCI: 01:0d.0 [1166/0104] enabled
PCI: 01:0e.0 [1166/024a] enabled
PCI: 01:0e.1 [1166/024a] enabled
PCI: pci_scan_bus for bus 02
PCI: pci_scan_bus returning with max=002
PCI: 02: Conventional PCI
PCI: pci_scan_bus returning with max=002
PCI: 01: 133MHz PCI-X
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: 04:04.0 [14e4/166a] enabled
PCI: 04:04.1 [14e4/166a] enabled
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus for bus 08
PCI: pci_scan_bus returning with max=008
PCI: pci_scan_bus returning with max=008
PCI: pci_scan_bus returning with max=008
done
Allocating resources...
Reading resources...
PCI: 01:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io
PCI: 01:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem
PCI: 01:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem
PCI: 00:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 01 prefmem
PCI: 00:06.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
PCI: 00:06.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
PCI: 00:07.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
PCI: 00:07.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
PCI: 00:08.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
PCI: 00:08.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
PCI: 00:08.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
PCI: 00:09.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
PCI: 00:09.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
PCI: 00:09.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io
PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem
PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 08 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 08 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 08 mem
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
Done reading resources.
Allocating VGA resource PCI: 00:0c.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1b8 <- [0x00f0000000 - 0x00f7ffffff] prefmem <node 0 link 0>
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00fc000000 - 0x00fc2fffff] mem <node 0 link 0>
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:18.0 1da <- [0x0000004000 - 0x0000003fff] io <node 0 link 2>
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:18.0 1aa <- [0x00fc300000 - 0x00fc2fffff] prefmem <node 0 link 2>
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:04.0 missing read_resources
PCI: 00:05.0 missing read_resources
PCI: 00:00.0 missing read_resources
PCI: 00:01.0 missing read_resources
PCI: 00:01.1 missing read_resources
PCI: 00:01.2 missing read_resources
PCI: 00:01.3 missing read_resources
PCI: 00:01.4 missing read_resources
PCI: 00:01.5 missing read_resources
PCI: 00:01.6 missing read_resources
PCI: 00:02.0 missing read_resources
PCI: 00:02.1 missing read_resources
PCI: 00:02.2 missing read_resources
PCI: 00:03.0 missing read_resources
PCI: 00:18.0 1a2 <- [0x00fc300000 - 0x00fc2fffff] mem <node 0 link 2>
PCI: 00:01.0 1c <- [0x0000001000 - 0x0000001fff] bus 01 io
PCI: 00:01.0 20 <- [0x00fc000000 - 0x00fc0fffff] bus 01 mem
PCI: 01:0e.0 10 <- [0x0000001030 - 0x0000001037] io
PCI: 01:0e.0 14 <- [0x0000001070 - 0x0000001073] io
PCI: 01:0e.0 18 <- [0x0000001040 - 0x0000001047] io
PCI: 01:0e.0 1c <- [0x0000001080 - 0x0000001083] io
PCI: 01:0e.0 20 <- [0x0000001000 - 0x000000101f] io
PCI: 01:0e.0 24 <- [0x00fc020000 - 0x00fc021fff] mem
PCI: 01:0e.0 30 <- [0x00fc000000 - 0x00fc01ffff] romem
PCI: 01:0e.1 10 <- [0x0000001050 - 0x0000001057] io
PCI: 01:0e.1 14 <- [0x0000001090 - 0x0000001093] io
PCI: 01:0e.1 18 <- [0x0000001060 - 0x0000001067] io
PCI: 01:0e.1 1c <- [0x00000010a0 - 0x00000010a3] io
PCI: 01:0e.1 20 <- [0x0000001020 - 0x000000102f] io
PCI: 00:02.0 90 <- [0x0000003040 - 0x000000304f] io
PCI: 00:02.1 10 <- [0x0000003060 - 0x0000003067] io
PCI: 00:02.1 14 <- [0x0000003080 - 0x0000003083] io
PCI: 00:02.1 18 <- [0x0000003070 - 0x0000003077] io
PCI: 00:02.1 1c <- [0x0000003090 - 0x0000003093] io
PCI: 00:02.1 20 <- [0x0000003050 - 0x000000305f] io
PCI: 00:02.1 64 <- [0x00000030a0 - 0x00000030a3] io
PCI: 00:02.3 10 <- [0x00fc250000 - 0x00fc250fff] mem
PCI: 00:02.4 10 <- [0x00fc251000 - 0x00fc251fff] mem
PCI: 00:02.5 10 <- [0x00fc252000 - 0x00fc252fff] mem
PCI: 00:02.6 10 <- [0x00fc253000 - 0x00fc253fff] mem
PCI: 00:03.0 10 <- [0x00fc254000 - 0x00fc254fff] mem
PCI: 00:03.0 14 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:03.1 10 <- [0x00fc255000 - 0x00fc255fff] mem
PCI: 00:03.1 14 <- [0x0000002400 - 0x00000024ff] io
PCI: 00:03.2 10 <- [0x00fc256000 - 0x00fc256fff] mem
PCI: 00:03.2 14 <- [0x0000002800 - 0x00000028ff] io
PCI: 00:04.0 10 <- [0x00fc257000 - 0x00fc257fff] mem
PCI: 00:04.0 14 <- [0x0000003000 - 0x000000303f] io
PCI: 00:04.0 18 <- [0x00fc200000 - 0x00fc21ffff] mem
PCI: 00:07.0 20 <- [0x00fc100000 - 0x00fc1fffff] bus 04 mem
PCI: 04:04.0 10 <- [0x00fc100000 - 0x00fc10ffff] mem64
PCI: 04:04.0 18 <- [0x00fc110000 - 0x00fc11ffff] mem64
PCI: 04:04.1 10 <- [0x00fc120000 - 0x00fc12ffff] mem64
PCI: 04:04.1 18 <- [0x00fc130000 - 0x00fc13ffff] mem64
PCI: 00:0c.0 10 <- [0x00f0000000 - 0x00f7ffffff] prefmem
PCI: 00:0c.0 14 <- [0x0000002c00 - 0x0000002cff] io
PCI: 00:0c.0 18 <- [0x00fc240000 - 0x00fc24ffff] mem
PCI: 00:0c.0 30 <- [0x00fc220000 - 0x00fc23ffff] romem
PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 140
PCI: 00:01.0 bridge ctrl <- 0003
PCI: 00:01.0 cmd <- 147
PCI: 01:0d.0 bridge ctrl <- 0003
PCI: 01:0d.0 cmd <- 140
PCI: 01:0e.0 cmd <- 143
PCI: 01:0e.1 cmd <- 141
PCI: 00:02.0 cmd <- 147
PCI: 00:02.1 cmd <- 141
PCI: 00:02.2 cmd <- 144
PCI: 00:02.3 cmd <- 146
PCI: 00:02.4 cmd <- 146
PCI: 00:02.5 cmd <- 146
PCI: 00:02.6 cmd <- 146
PCI: 00:03.0 cmd <- 143
PCI: 00:03.1 cmd <- 143
PCI: 00:03.2 cmd <- 143
PCI: 00:04.0 cmd <- 143
PCI: 00:06.0 bridge ctrl <- 0003
PCI: 00:06.0 cmd <- 140
PCI: 00:07.0 bridge ctrl <- 0003
PCI: 00:07.0 cmd <- 146
PCI: 04:04.0 cmd <- 142
PCI: 04:04.1 cmd <- 142
PCI: 00:08.0 bridge ctrl <- 0003
PCI: 00:08.0 cmd <- 140
PCI: 00:09.0 bridge ctrl <- 0003
PCI: 00:09.0 cmd <- 140
PCI: 00:0a.0 bridge ctrl <- 0003
PCI: 00:0a.0 cmd <- 140
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 140
PCI: 00:0c.0 cmd <- 1c3
PCI: 00:00.0 missing enable_resources
PCI: 00:01.0 missing enable_resources
PCI: 00:02.0 missing enable_resources
PCI: 00:03.0 missing enable_resources
PCI: 00:04.0 missing enable_resources
PCI: 00:05.0 missing enable_resources
PCI: 00:00.0 missing enable_resources
PCI: 00:01.0 missing enable_resources
PCI: 00:01.1 missing enable_resources
PCI: 00:01.2 missing enable_resources
PCI: 00:01.3 missing enable_resources
PCI: 00:01.4 missing enable_resources
PCI: 00:01.5 missing enable_resources
PCI: 00:01.6 missing enable_resources
PCI: 00:02.0 missing enable_resources
PCI: 00:02.1 missing enable_resources
PCI: 00:02.2 missing enable_resources
PCI: 00:03.0 missing enable_resources
PCI: 00:18.1 subsystem <- 1022/2b80
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 1022/2b80
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
start_eip=0x00004000, offset=0x00110000, code_size=0x0000005b
Initializing CPU #1
Initializing CPU #0
CPU: vendor AMD device 40f11
CPU: vendor AMD device 40f11
CPU: family 0f, model 41, stepping 01
CPU: family 0f, model 41, stepping 01
brandId=02c0
brandId=02c0
Enabling cache
Enabling cache

Setting fixed MTRRs(0-88) type: UC

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 1024MB, type WB
Setting variable MTRR 0, base:    0MB, range: 1024MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled


MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

CPU model AMD Turion(tm) 64 Mobile Technology MT-22
CPU model AMD Turion(tm) 64 Mobile Technology MT-22
Setting up local apic...Setting up local apic... apic_id: 0x00 done.
 apic_id: 0x01 done.
Clearing memory 2048K - 1048576K: CPU #1 Initialized
--------------- done
CPU #0 Initialized
All AP CPUs stopped
PCI: 00:18.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:02.0 init
PCI: 00:02.1 init
PCI: 00:02.2 init
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
PCI: 00:02.3 init
PCI: 00:02.4 init
PCI: 00:02.5 init
PCI: 00:02.6 init
PCI: 00:03.0 init
PCI: 00:03.1 init
PCI: 00:03.2 init
PCI: 00:04.0 init
PCI: 00:08.0 init
PCI: 00:09.0 init
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
rom address for PCI: 00:0c.0 = fc220000
BTDC: device class = 0
BTDC: device class = 3
BTDC: set rom_address manually
copying VGA ROM Image from 0xfff80000 to 0xc0000, 0x9000 bytes
entering emulator
un-inited int vector
halt_sys: file /home/fengl/LinuxBIOSv2-2584/src/devices/emulator/x86emu/ops.c, l
ine 4387
PCI: 01:0e.0 init
init PHY...
port 0 PHY status = 04
after reset port 0 PHY status = 04
port 1 PHY status = 04
after reset port 1 PHY status = 04
port 2 PHY status = 04
after reset port 2 PHY status = 04
port 3 PHY status = 04
after reset port 3 PHY status = 04
PCI: 01:0e.1 init
PCI: 04:04.0 init
PCI: 04:04.1 init
Devices initialized
bus_isa=4
bus_isa=5
bus_isa=6
bus_isa=7
bus_isa=8
bus_isa=9
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 0000024c
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 00000de0  checksum 2ef4

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.

Booting 'hda1:/vmlinuz-2.6.9-22.EL ro root=/dev/VolGroup00/LogVol00 rhgb consol
e=tty0 console=ttyS0,115200 initrd=/initrd-2.6.9-22.EL.img'
Found Linux version 2.6.9-22.EL (bhcompile@crowe.devel.redhat.com) #1 Mon Sep 19
 17:49:49 EDT 2005 bzImage.
Loading kernel... ok
Loading initrd... ok
Jumping to entry point...
Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb console=tty0
console=ttyS0,115200)
Linux version 2.6.9-22.EL (bhcompile@crowe.devel.redhat.com) (gcc version 3.4.4
20050721 (Red Hat 3.4.4-2)) #1 Mon Sep 19 17:49:49 EDT 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000e4c - 00000000000a0000 (usable)
 BIOS-e820: 0000000000100000 - 0000000040000000 (usable)
ACPI: Unable to locate RSDP
DMI not present.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: MSI <6>Product ID: MS9185 <6>APIC at: 0xFEE00000
Processor #0 15:1 APIC version 16
Processor #1 15:1 APIC version 16
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
I/O APIC #2 Version 17 at 0xFC251000.
I/O APIC #3 Version 17 at 0xFC252000.
I/O APIC #4 Version 17 at 0xFC253000.
Processors: 1
Checking aperture...
CPU 0: aperture @ f8000000 size 64 MB
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb console=tty0 console=
ttyS0,115200
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 2194.613 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1024076k/1048576k available (2398k kernel code, 23736k reserved, 1303k d
ata, 164k init)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: AMD Turion(tm) 64 Mobile Technology MT-22 stepping 01
Using local APIC NMI watchdog using perfctr0
Using IO-APIC 2
Using IO-APIC 3
Using IO-APIC 4
Using local APIC timer interrupts.
Detected 12.469 MHz APIC timer.
checking if image is initramfs... it is
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.1
PCI: Using IRQ router default [1166/0036] at 0000:00:01.0
PCI->APIC IRQ transform: (B0,I3,P0) -> 10
PCI->APIC IRQ transform: (B0,I3,P0) -> 10
PCI->APIC IRQ transform: (B0,I3,P0) -> 10
PCI->APIC IRQ transform: (B0,I4,P0) -> 161
PCI->APIC IRQ transform: (B1,I14,P0) -> 15
PCI->APIC IRQ transform: (B1,I14,P0) -> 15
PCI->APIC IRQ transform: (B4,I4,P0) -> 217
PCI->APIC IRQ transform: (B4,I4,P1) -> 225
PCI-DMA: Disabling IOMMU.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1009843659.522:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key BFA28740EEFE8097
  - key was been created 117322795 seconds in future
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
i8042.c: No controller found.
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
?ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: IC35L020AVVA07-0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: Host Protected Area detected.
        current capacity is 39874367 sectors (20415 MB)
        native  capacity is 39876480 sectors (20416 MB)
hda: 39874367 sectors (20415 MB) w/1863KiB Cache, CHS=39557/16/63
 hda: hda1 hda2
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 56Kbytes
TCP: Hash tables configured (established 262144 bind 37449)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 40f11 not supported
Freeing unused kernel memory: 164k freed
Red Hat nash version 4.2.1.6 starting
Mounted /proc filesystem
Mounting sysfs
Creating /dev
Starting udev
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loading libata.ko module
Loading sata_svw.ko module
ata1: SATA max UDMA/133 cmd 0xFFFFFF0000010000 ctl 0xFFFFFF0000010020 bmdma 0xFF
FFFF0000010030 irq 15
ata2: SATA max UDMA/133 cmd 0xFFFFFF0000010100 ctl 0xFFFFFF0000010120 bmdma 0xFF
FFFF0000010130 irq 15
ata3: SATA max UDMA/133 cmd 0xFFFFFF0000010200 ctl 0xFFFFFF0000010220 bmdma 0xFF
FFFF0000010230 irq 15
ata4: SATA max UDMA/133 cmd 0xFFFFFF0000010300 ctl 0xFFFFFF0000010320 bmdma 0xFF
FFFF0000010330 irq 15
ata1: no device found (phy stat 00000004)
scsi0 : sata_svw
ata2: no device found (phy stat 00000004)
scsi1 : sata_svw
ata3: no device found (phy stat 00000004)
scsi2 : sata_svw
ata4: no device found (phy stat 00000004)
scsi3 : sata_svw
Loading dm-mod.ko module
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Loading jbd.ko module
Loading ext3.ko module
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loadi
CPU 0: Machine Check Exception:                4 Bank 0: 947a400000000833
TSC 45a20e904a ADDR 3fb07340

CPU 0: Machine Check Exception:                4 Bank 1: b600200000000853
TSC 45a20e957c ADDR 1d3480

CPU 0: Machine Check Exception:                4 Bank 2: d000400000000863
TSC 45a20e970a
Kernel panic - not syncing: Machine check
 ng dm-snapshot.ko module