

LinuxBIOS-2.0.0.0-Fallback Sun Jul 22 16:15:56 EDT 2007 starting...
Enabling mainboard devices
Copying LinuxBIOS to RAM.
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0.0-Fallback Sun Jul 22 16:15:56 EDT 2007 booting...
end 82e81318, start 0
32-bit delta 1952
calibrate_tsc 32-bit result is 1952
clocks_per_usec: 1952
Enumerating buses...
scan_static_bus for Root Device
In cn700 enable_dev for device APIC_CLUSTER: 0.
APIC_CLUSTER: 0 enabled
In cn700 enable_dev for device PCI_DOMAIN: 0000.
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
PCI_DOMAIN: 0000 scanning...
Entering cn700 pci_domain_scan_bus.
PCI: pci_scan_bus for bus 00
In cn700 enable_dev for device PCI: 00:00.0.
PCI: 00:00.0 [1106/0314] ops
PCI: 00:00.0 [1106/0314] enabled
In cn700 enable_dev for device PCI: 00:00.1.
PCI: 00:00.1 [1106/1314] enabled
In cn700 enable_dev for device PCI: 00:00.2.
PCI: 00:00.2 [1106/2314] enabled
In cn700 enable_dev for device PCI: 00:00.3.
PCI: 00:00.3 [1106/3208] enabled
In cn700 enable_dev for device PCI: 00:00.4.
PCI: 00:00.4 [1106/4314] enabled
PCI: devfn 0x5, bad id 0xffffffff
PCI: devfn 0x6, bad id 0xffffffff
In cn700 enable_dev for device PCI: 00:00.7.
PCI: 00:00.7 [1106/7314] enabled
In cn700 enable_dev for device PCI: 00:01.0.
PCI: 00:01.0 [1106/b198] bus ops
PCI: 00:01.0 [1106/b198] enabled
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
malloc Enter, size 668, free_mem_ptr 0001e000
malloc 0x0001e000
PCI: 00:0a.0 [1106/3044] enabled
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
In vt8237r_enable ffff ffff.
Disabling static device: PCI: 00:0f.0
In vt8237r_enable ffff ffff.
Disabling static device: PCI: 00:0f.1
PCI: devfn 0x7a, bad id 0xffffffff
PCI: devfn 0x7b, bad id 0xffffffff
PCI: devfn 0x7c, bad id 0xffffffff
PCI: devfn 0x7d, bad id 0xffffffff
PCI: devfn 0x7e, bad id 0xffffffff
PCI: devfn 0x7f, bad id 0xffffffff
In vt8237r_enable 1106 3038.
PCI: 00:10.0 [1106/3038] ops
PCI: 00:10.0 [1106/3038] enabled
In vt8237r_enable 1106 3038.
PCI: 00:10.1 [1106/3038] ops
PCI: 00:10.1 [1106/3038] enabled
In vt8237r_enable 1106 3038.
PCI: 00:10.2 [1106/3038] ops
PCI: 00:10.2 [1106/3038] enabled
In vt8237r_enable 1106 3038.
PCI: 00:10.3 [1106/3038] ops
PCI: 00:10.3 [1106/3038] enabled
malloc Enter, size 668, free_mem_ptr 0001e29c
malloc 0x0001e29c
PCI: 00:10.4 [1106/3104] ops
PCI: 00:10.4 [1106/3104] enabled
malloc Enter, size 668, free_mem_ptr 0001e538
malloc 0x0001e538
PCI: 00:10.5 [1106/d104] enabled
PCI: devfn 0x86, bad id 0xffffffff
PCI: devfn 0x87, bad id 0xffffffff
In vt8237r_enable 1106 3227.
Initialising Devices
PCI: 00:11.0 [1106/3227] bus ops
PCI: 00:11.0 [1106/3227] enabled
PCI: devfn 0x89, bad id 0xffffffff
PCI: devfn 0x8a, bad id 0xffffffff
PCI: devfn 0x8b, bad id 0xffffffff
PCI: devfn 0x8c, bad id 0xffffffff
In vt8237r_enable 1106 3059.
PCI: 00:11.5 [1106/3059] ops
PCI: 00:11.5 [1106/3059] enabled
In vt8237r_enable ffff ffff.
PCI: devfn 0x8f, bad id 0xffffffff
In vt8237r_enable 1106 3065.
PCI: 00:12.0 [1106/3065] ops
PCI: 00:12.0 [1106/3065] enabled
PCI: devfn 0x98, bad id 0xffffffff
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
do_pci_scan_bridge for PCI: 00:01.0
PCI: pci_scan_bus for bus 01
PCI: devfn 0x0, bad id 0xffffffff
PCI: devfn 0x8, bad id 0xffffffff
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: devfn 0x90, bad id 0xffffffff
PCI: devfn 0x98, bad id 0xffffffff
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
PCI: pci_scan_bus returning with max=001
do_pci_scan_bridge returns max 1
scan_static_bus for PCI: 00:11.0
scan_static_bus for PCI: 00:11.0 done
PCI: pci_scan_bus returning with max=001
scan_static_bus for Root Device done
done
Allocating resources...
Reading resources...
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Entering cn700 pci_domain_read_resources.
Leaving cn700 pci_domain_read_resources.
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.5 10 *  [0x00000400 - 0x000004ff] io
PCI: 00:12.0 10 *  [0x00000800 - 0x000008ff] io
PCI: 00:0a.0 14 *  [0x00000c00 - 0x00000c7f] io
PCI: 00:10.0 20 *  [0x00000c80 - 0x00000c9f] io
PCI: 00:10.1 20 *  [0x00000ca0 - 0x00000cbf] io
PCI: 00:10.2 20 *  [0x00000cc0 - 0x00000cdf] io
PCI: 00:10.3 20 *  [0x00000ce0 - 0x00000cff] io
Root Device compute_allocate_io: base: 00000d00 size: 00000900 align: 8 gran: 0 done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.0 46 *  [0x00000000 - 0x0fffffff] mem
PCI: 00:0a.0 10 *  [0x10000000 - 0x100007ff] mem
PCI: 00:10.4 10 *  [0x10001000 - 0x100010ff] mem
PCI: 00:10.5 10 *  [0x10002000 - 0x100020ff] mem
PCI: 00:12.0 14 *  [0x10003000 - 0x100030ff] mem
Root Device compute_allocate_mem: base: 10003100 size: 10003100 align: 28 gran: 0 done
Done reading resources.
Setting resources...
Root Device compute_allocate_io: base: 00001000 size: 00000900 align: 8 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.5 10 *  [0x00001000 - 0x000010ff] io
PCI: 00:12.0 10 *  [0x00001400 - 0x000014ff] io
PCI: 00:0a.0 14 *  [0x00001800 - 0x0000187f] io
PCI: 00:10.0 20 *  [0x00001880 - 0x0000189f] io
PCI: 00:10.1 20 *  [0x000018a0 - 0x000018bf] io
PCI: 00:10.2 20 *  [0x000018c0 - 0x000018df] io
PCI: 00:10.3 20 *  [0x000018e0 - 0x000018ff] io
Root Device compute_allocate_io: base: 00001900 size: 00000900 align: 8 gran: 0 done
Root Device compute_allocate_mem: base: e0000000 size: 10003100 align: 28 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.0 46 *  [0xe0000000 - 0xefffffff] mem
PCI: 00:0a.0 10 *  [0xf0000000 - 0xf00007ff] mem
PCI: 00:10.4 10 *  [0xf0001000 - 0xf00010ff] mem
PCI: 00:10.5 10 *  [0xf0002000 - 0xf00020ff] mem
PCI: 00:12.0 14 *  [0xf0003000 - 0xf00030ff] mem
Root Devic

LinuxBIOS-2.0.0.0-Fallback Sun Jul 22 16:15:56 EDT 2007 starting...
Enabling mainboard devices
Copying LinuxBIOS to RAM.
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0.0-Fallback Sun Jul 22 16:15:56 EDT 2007 booting...
end 82e81318, start 0
32-bit delta 1952
calibrate_tsc 32-bit result is 1952
clocks_per_usec: 1952
Enumerating buses...
scan_static_bus for Root Device
In cn700 enable_dev for device APIC_CLUSTER: 0.
APIC_CLUSTER: 0 enabled
In cn700 enable_dev for device PCI_DOMAIN: 0000.
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
PCI_DOMAIN: 0000 scanning...
Entering cn700 pci_domain_scan_bus.
PCI: pci_scan_bus for bus 00
In cn700 enable_dev for device PCI: 00:00.0.
PCI: 00:00.0 [1106/0314] ops
PCI: 00:00.0 [1106/0314] enabled
In cn700 enable_dev for device PCI: 00:00.1.
PCI: 00:00.1 [1106/1314] enabled
In cn700 enable_dev for device PCI: 00:00.2.
PCI: 00:00.2 [1106/2314] enabled
In cn700 enable_dev for device PCI: 00:00.3.
PCI: 00:00.3 [1106/3208] enabled
In cn700 enable_dev for device PCI: 00:00.4.
PCI: 00:00.4 [1106/4314] enabled
PCI: devfn 0x5, bad id 0xffffffff
PCI: devfn 0x6, bad id 0xffffffff
In cn700 enable_dev for device PCI: 00:00.7.
PCI: 00:00.7 [1106/7314] enabled
In cn700 enable_dev for device PCI: 00:01.0.
PCI: 00:01.0 [1106/b198] bus ops
PCI: 00:01.0 [1106/b198] enabled
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
malloc Enter, size 668, free_mem_ptr 0001e000
malloc 0x0001e000
PCI: 00:0a.0 [1106/3044] enabled
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
In vt8237r_enable ffff ffff.
Disabling static device: PCI: 00:0f.0
In vt8237r_enable ffff ffff.
Disabling static device: PCI: 00:0f.1
PCI: devfn 0x7a, bad id 0xffffffff
PCI: devfn 0x7b, bad id 0xffffffff
PCI: devfn 0x7c, bad id 0xffffffff
PCI: devfn 0x7d, bad id 0xffffffff
PCI: devfn 0x7e, bad id 0xffffffff
PCI: devfn 0x7f, bad id 0xffffffff
In vt8237r_enable 1106 3038.
PCI: 00:10.0 [1106/3038] ops
PCI: 00:10.0 [1106/3038] enabled
In vt8237r_enable 1106 3038.
PCI: 00:10.1 [1106/3038] ops
PCI: 00:10.1 [1106/3038] enabled
In vt8237r_enable 1106 3038.
PCI: 00:10.2 [1106/3038] ops
PCI: 00:10.2 [1106/3038] enabled
In vt8237r_enable 1106 3038.
PCI: 00:10.3 [1106/3038] ops
PCI: 00:10.3 [1106/3038] enabled
malloc Enter, size 668, free_mem_ptr 0001e29c
malloc 0x0001e29c
PCI: 00:10.4 [1106/3104] ops
PCI: 00:10.4 [1106/3104] enabled
malloc Enter, size 668, free_mem_ptr 0001e538
malloc 0x0001e538
PCI: 00:10.5 [1106/d104] enabled
PCI: devfn 0x86, bad id 0xffffffff
PCI: devfn 0x87, bad id 0xffffffff
In vt8237r_enable 1106 3227.
Initialising Devices
PCI: 00:11.0 [1106/3227] bus ops
PCI: 00:11.0 [1106/3227] enabled
PCI: devfn 0x89, bad id 0xffffffff
PCI: devfn 0x8a, bad id 0xffffffff
PCI: devfn 0x8b, bad id 0xffffffff
PCI: devfn 0x8c, bad id 0xffffffff
In vt8237r_enable 1106 3059.
PCI: 00:11.5 [1106/3059] ops
PCI: 00:11.5 [1106/3059] enabled
In vt8237r_enable ffff ffff.
PCI: devfn 0x8f, bad id 0xffffffff
In vt8237r_enable 1106 3065.
PCI: 00:12.0 [1106/3065] ops
PCI: 00:12.0 [1106/3065] enabled
PCI: devfn 0x98, bad id 0xffffffff
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
do_pci_scan_bridge for PCI: 00:01.0
PCI: pci_scan_bus for bus 01
PCI: devfn 0x0, bad id 0xffffffff
PCI: devfn 0x8, bad id 0xffffffff
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: devfn 0x90, bad id 0xffffffff
PCI: devfn 0x98, bad id 0xffffffff
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
PCI: pci_scan_bus returning with max=001
do_pci_scan_bridge returns max 1
scan_static_bus for PCI: 00:11.0
scan_static_bus for PCI: 00:11.0 done
PCI: pci_scan_bus returning with max=001
scan_static_bus for Root Device done
done
Allocating resources...
Reading resources...
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Entering cn700 pci_domain_read_resources.
Leaving cn700 pci_domain_read_resources.
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.5 10 *  [0x00000400 - 0x000004ff] io
PCI: 00:12.0 10 *  [0x00000800 - 0x000008ff] io
PCI: 00:0a.0 14 *  [0x00000c00 - 0x00000c7f] io
PCI: 00:10.0 20 *  [0x00000c80 - 0x00000c9f] io
PCI: 00:10.1 20 *  [0x00000ca0 - 0x00000cbf] io
PCI: 00:10.2 20 *  [0x00000cc0 - 0x00000cdf] io
PCI: 00:10.3 20 *  [0x00000ce0 - 0x00000cff] io
Root Device compute_allocate_io: base: 00000d00 size: 00000900 align: 8 gran: 0 done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.0 46 *  [0x00000000 - 0x0fffffff] mem
PCI: 00:0a.0 10 *  [0x10000000 - 0x100007ff] mem
PCI: 00:10.4 10 *  [0x10001000 - 0x100010ff] mem
PCI: 00:10.5 10 *  [0x10002000 - 0x100020ff] mem
PCI: 00:12.0 14 *  [0x10003000 - 0x100030ff] mem
Root Device compute_allocate_mem: base: 10003100 size: 10003100 align: 28 gran: 0 done
Done reading resources.
Setting resources...
Root Device compute_allocate_io: base: 00001000 size: 00000900 align: 8 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.5 10 *  [0x00001000 - 0x000010ff] io
PCI: 00:12.0 10 *  [0x00001400 - 0x000014ff] io
PCI: 00:0a.0 14 *  [0x00001800 - 0x0000187f] io
PCI: 00:10.0 20 *  [0x00001880 - 0x0000189f] io
PCI: 00:10.1 20 *  [0x000018a0 - 0x000018bf] io
PCI: 00:10.2 20 *  [0x000018c0 - 0x000018df] io
PCI: 00:10.3 20 *  [0x000018e0 - 0x000018ff] io
Root Device compute_allocate_io: base: 00001900 size: 00000900 align: 8 gran: 0 done
Root Device compute_allocate_mem: base: e0000000 size: 10003100 align: 28 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.0 46 *  [0xe0000000 - 0xefffffff] mem
PCI: 00:0a.0 10 *  [0xf0000000 - 0xf00007ff] mem
PCI: 00:10.4 10 *  [0xf0001000 - 0xf00010ff] mem
PCI: 00:10.5 10 *  [0xf0002000 - 0xf00020ff] mem
PCI: 00:12.0 14 *  [0xf0003000 - 0xf00030ff] mem
Root Device compute_allocate_mem: base: f0003100 size: 10003100 align: 28 gran: 0 done
Root Device assign_resources, bus 0 link: 0
Entering cn700 pci_domain_set_resources.
mc_dev located at 0x11880
ERROR! register 0x5b is not set!
ERROR! register 0x5c is not set!
ERROR! register 0x5d is not set!
I would set ram size to 0x204000 Kbytes
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:0a.0 10 <- [0x00f0000000 - 0x00f00007ff] mem
PCI: 00:0a.0 14 <- [0x0000001800 - 0x000000187f] io
PCI: 00:10.0 20 <- [0x0000001880 - 0x000000189f] io
PCI: 00:10.1 20 <- [0x00000018a0 - 0x00000018bf] io
PCI: 00:10.2 20 <- [0x00000018c0 - 0x00000018df] io
PCI: 00:10.3 20 <- [0x00000018e0 - 0x00000018ff] io
PCI: 00:10.4 10 <- [0x00f0001000 - 0x00f00010ff] mem
PCI: 00:10.5 10 <- [0x00f0002000 - 0x00f00020ff] mem
PCI: 00:11.5 10 <- [0x0000001000 - 0x00000010ff] io
PCI: 00:12.0 10 <- [0x0000001400 - 0x00000014ff] io
PCI: 00:12.0 14 <- [0x00f0003000 - 0x00f00030ff] mem
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:00.0 cmd <- 146
PCI: 00:00.1 subsystem <- 00/00
PCI: 00:00.1 cmd <- 146
PCI: 00:00.2 subsystem <- 00/00
PCI: 00:00.2 cmd <- 146
PCI: 00:00.3 subsystem <- 00/00
PCI: 00:00.3 cmd <- 146
PCI: 00:00.4 subsystem <- 00/00
PCI: 00:00.4 cmd <- 146
PCI: 00:00.7 subsystem <- 00/00
PCI: 00:00.7 cmd <- 146
PCI: 00:01.0 bridge ctrl <- 0003
PCI: 00:01.0 cmd <- 147
PCI: 00:0a.0 cmd <- 1c3
PCI: 00:10.0 cmd <- 141
PCI: 00:10.1 cmd <- 141
PCI: 00:10.2 cmd <- 141
PCI: 00:10.3 cmd <- 141
PCI: 00:10.4 cmd <- 142
PCI: 00:10.5 cmd <- 142
PCI: 00:11.0 cmd <- 1c7
PCI: 00:11.5 cmd <- 141
PCI: 00:12.0 cmd <- 1c3
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
malloc Enter, size 668, free_mem_ptr 0001e7d4
malloc 0x0001e7d4
Initializing CPU #0
CPU: vendor Centaur device 6a9
CPU: family 06, model 0a, stepping 09
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB
Setting fixed MTRRs(24-88) Type: WB
DONE fixed MTRRs
call enable_fixed_mtrr()
Setting variable MTRR 0, base:    0MB, range:  512MB, type WB
ADDRESS_MASK_HIGH=0xf
DONE variable MTRRs
Clear out the extra MTRR's
call enable_var_mtrr()
Leave x86_setup_var_mtrrs

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Disabling local apic...done.
CPU #0 Initialized
PCI: 00:00.0 init
PCI: 00:00.1 init
PCI: 00:00.2 init
PCI: 00:00.3 init
PCI: 00:00.4 init
PCI: 00:00.7 init
PCI: 00:01.0 init
PCI: 00:10.0 init
base address for this usb controller is 0xFA01
PCI: 00:10.1 init
base address for this usb controller is 0xFB01
PCI: 00:10.2 init
base address for this usb controller is 0xFC01
PCI: 00:10.3 init
base address for this usb controller is 0xFD01
PCI: 00:11.0 init
vt8237r init
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
for IRQ, reg 0x00000000 value 0x00000700 0xff000000
for IRQ, reg 0x00000001 value 0x00010000 0x00000000
for IRQ, reg 0x00000002 value 0x00010000 0x00000000
for IRQ, reg 0x00000003 value 0x00010000 0x00000000
for IRQ, reg 0x00000004 value 0x00010000 0x00000000
for IRQ, reg 0x00000005 value 0x00010000 0x00000000
for IRQ, reg 0x00000006 value 0x00010000 0x00000000
for IRQ, reg 0x00000007 value 0x00010000 0x00000000
for IRQ, reg 0x00000008 value 0x00010000 0x00000000
for IRQ, reg 0x00000009 value 0x00010000 0x00000000
for IRQ, reg 0x0000000a value 0x00010000 0x00000000
for IRQ, reg 0x0000000b value 0x00010000 0x00000000
for IRQ, reg 0x0000000c value 0x00010000 0x00000000
for IRQ, reg 0x0000000d value 0x00010000 0x00000000
for IRQ, reg 0x0000000e value 0x00010000 0x00000000
for IRQ, reg 0x0000000f value 0x00010000 0x00000000
for IRQ, reg 0x00000010 value 0x00010000 0x00000000
for IRQ, reg 0x00000011 value 0x00010000 0x00000000
for IRQ, reg 0x00000012 value 0x00010000 0x00000000
for IRQ, reg 0x00000013 value 0x00010000 0x00000000
for IRQ, reg 0x00000014 value 0x00010000 0x00000000
for IRQ, reg 0x00000015 value 0x00010000 0x00000000
for IRQ, reg 0x00000016 value 0x00010000 0x00000000
for IRQ, reg 0x00000017 value 0x00010000 0x00000000
PCI: 00:11.5 init
Enabling VIA AC'97 Audio.
PCI: 00:12.0 init
Configuring VIA Rhine LAN
PCI: 00:0a.0 init
PCI: 00:10.4 init
PCI: 00:10.5 init
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...done
Checking IRQ routing table consistency...
check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
/home/amp/linuxbios/LinuxBIOSv2/src/arch/i386/boot/pirq_routing.c:    36:check_pirq_routing_table() - checksum is: 0xb7 but should be: 0x89
done.
ACPI: Writing ACPI tables at f0400...
ACPI:     * FACS
ACPI:     * DSDT @ 000f04a2 Length 589a
ACPI:     * FADT
ACPI: added table 1/6 Length now 40
ACPI: done.
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 00000b70  checksum 8775

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3

rom_stream: 0xfffc0000 - 0xfffdbfff
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
malloc Enter, size 32, free_mem_ptr 0001ea70
malloc 0x0001ea70
New segment addr 0x100000 size 0x234e0 offset 0xc0 filesize 0x9348
(cleaned up) New segment addr 0x100000 size 0x234e0 offset 0xc0 filesize 0x9348
lb: [0x0000000000004000, 0x0000000000022000)
malloc Enter, size 32, free_mem_ptr 0001ea90
malloc 0x0001ea90
New segment addr 0x1234e0 size 0x48 offset 0x9420 filesize 0x48
(cleaned up) New segment addr 0x1234e0 size 0x48 offset 0x9420 filesize 0x48
lb: [0x0000000000004000, 0x0000000000022000)
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz: 0x00000000000234e0 filesz: 0x0000000000009348
[ 0x0000000000100000, 0000000000109348, 0x00000000001234e0) <- 00000000000000c0
Clearing Segment: addr: 0x0000000000109348 memsz: 0x000000000001a198
Loading Segment: addr: 0x00000000001234e0 memsz: 0x0000000000000048 filesz: 0x0000000000000048
[ 0x00000000001234e0, 0000000000123528, 0x0000000000123528) <- 0000000000009420
Loaded segments
verified segments
closed down stream
Jumping to boot code at 0x106524
entry    = 0x00106524
lb_start = 0x00004000
lb_size  = 0x0001e000
adjust   = 0x1ffde000
buffer   = 0x1ffc4000
     elf_boot_notes = 0x00017ee0
adjusted_boot_notes = 0x1fff5ee0
FILO version 0.5 (amp@ampmobile) Sun Jul 22 00:31:32 EDT 2007
collect_sys_info: boot eax = 0xe1fb007
collect_sys_info: boot ebx = 0x1fff5ee0
collect_sys_info: boot arg = 0x1fff5ee0
malloc_diag: alloc: 0 bytes (0 blocks), free: 16376 bytes (1 blocks)
malloc_diag: alloc: 24 bytes (1 blocks), free: 16352 bytes (1 blocks)
collect_elfboot_info: Bootloader: elfboot
collect_elfboot_info: Version: 1.3
malloc_diag: alloc: 40 bytes (2 blocks), free: 16336 bytes (1 blocks)
collect_linuxbios_info: Searching for LinuxBIOS tables...
find_lb_table: Found canidate at: 00000530
find_lb_table: header checksum o.k.
find_lb_table: table checksum o.k.
find_lb_table: record count o.k.
collect_linuxbios_info: Found LinuxBIOS table at: 00000530
convert_memmap: 0x00000000000000 0x00000000000bd4 16
convert_memmap: 0x00000000000bd4 0x0000000009f42c 1
convert_memmap: 0x000000000c0000 0x00000000030000 1
convert_memmap: 0x000000000f0000 0x00000000010000 16
convert_memmap: 0x00000000100000 0x0000001ff00000 1
collect_sys_info: 0000000000000bd4-00000000000a0000
collect_sys_info: 00000000000c0000-00000000000f0000
collect_sys_info: 0000000000100000-0000000020000000
collect_sys_info: RAM 512 MB
relocate: Current location: 0x100000-0x123527
relocate: Relocating to 0x1ffdcad0-0x1ffffff7... ok
setup_timers: CPU 800 MHz
pci_init: Scanning PCI: found 19 devices
malloc_diag: alloc: 280 bytes (3 blocks), free: 16096 bytes (1 blocks)
pci_init: 00:00.0 1106:0314 0600 00
pci_init: 00:00.1 1106:1314 0600 00
pci_init: 00:00.2 1106:2314 0600 00
pci_init: 00:00.3 1106:3208 0600 00
pci_init: 00:00.4 1106:4314 0600 00
pci_init: 00:00.7 1106:7314 0600 00
pci_init: 00:01.0 1106:b198 0604 00
pci_init: 00:0a.0 1106:3044 0c00 10
pci_init: 00:0f.0 1106:3149 0104 00
pci_init: 00:0f.1 1106:0571 0101 8a
pci_init: 00:10.0 1106:3038 0c03 00
pci_init: 00:10.1 1106:3038 0c03 00
pci_init: 00:10.2 1106:3038 0c03 00
pci_init: 00:10.3 1106:3038 0c03 00
pci_init: 00:10.4 1106:3104 0c03 20
pci_init: 00:10.5 1106:d104 0280 00
pci_init: 00:11.0 1106:3227 0601 00
pci_init: 00:11.5 1106:3059 0401 00
pci_init: 00:12.0 1106:3065 0200 00
boot: hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200
malloc_diag: alloc: 352 bytes (4 blocks), free: 16024 bytes (1 blocks)
malloc_diag: alloc: 368 bytes (5 blocks), free: 16008 bytes (1 blocks)
file_open: dev=hda1, path=/vmlinuz
find_ide_controller: found PCI IDE controller 1106:0571 prog_if=0x8a
find_ide_controller: primary channel: compatibility mode
find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4
Detected floating bus
No drive detected on IDE channel 0
devopen: failed to open ide
malloc_diag: alloc: 352 bytes (4 blocks), free: 16024 bytes (1 blocks)
malloc_diag: alloc: 280 bytes (3 blocks), free: 16096 bytes (1 blocks)
boot: hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200
malloc_diag: alloc: 352 bytes (4 blocks), free: 16024 bytes (1 blocks)
malloc_diag: alloc: 368 bytes (5 blocks), free: 16008 bytes (1 blocks)
file_open: dev=hda1, path=/vmlinuz
Drive 0 does not exist
devopen: failed to open ide
malloc_diag: alloc: 352 bytes (4 blocks), free: 16024 bytes (1 blocks)
malloc_diag: alloc: 280 bytes (3 blocks), free: 16096 bytes (1 blocks)
boot: hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200                                                            c1
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 312 bytes (5 blocks), free: 16064 bytes (1 blocks)
file_open: dev=hdc1, path=<NULL>
find_ide_controller: found PCI IDE controller 1106:0571 prog_if=0x8a
find_ide_controller: secodary channel: compatibility mode
find_ide_controller: cmd_base=0x170 ctrl_base=0x374
Detected floating bus
No drive detected on IDE channel 1
devopen: failed to open ide
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 280 bytes (3 blocks), free: 16096 bytes (1 blocks)
boot: hdc1  b1
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 312 bytes (5 blocks), free: 16064 bytes (1 blocks)
file_open: dev=hdb1, path=<NULL>
Drive 1 does not exist
devopen: failed to open ide
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 280 bytes (3 blocks), free: 16096 bytes (1 blocks)
boot: hdb1  d1
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 312 bytes (5 blocks), free: 16064 bytes (1 blocks)
file_open: dev=hdd1, path=<NULL>
Drive 3 does not exist
devopen: failed to open ide
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 280 bytes (3 blocks), free: 16096 bytes (1 blocks)
boot: hdd1  e1
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 312 bytes (5 blocks), free: 16064 bytes (1 blocks)
file_open: dev=hde1, path=<NULL>
find_ide_controller: PCI IDE #1 not found
IDE channel 2 not found
devopen: failed to open ide
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 280 bytes (3 blocks), free: 16096 bytes (1 blocks)
boot: hde1  f1
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 312 bytes (5 blocks), free: 16064 bytes (1 blocks)
file_open: dev=hdf1, path=<NULL>
find_ide_controller: PCI IDE #1 not found
IDE channel 2 not found
devopen: failed to open ide
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 280 bytes (3 blocks), free: 16096 bytes (1 blocks)
boot: hdf1  a1
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 312 bytes (5 blocks), free: 16064 bytes (1 blocks)
file_open: dev=hda1, path=<NULL>
Drive 0 does not exist
devopen: failed to open ide
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 280 bytes (3 blocks), free: 16096 bytes (1 blocks)
boot: hda1 2
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 312 bytes (5 blocks), free: 16064 bytes (1 blocks)
file_open: dev=hda2, path=<NULL>
Drive 0 does not exist
devopen: failed to open ide
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 280 bytes (3 blocks), free: 16096 bytes (1 blocks)
boot: hda2 3
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 312 bytes (5 blocks), free: 16064 bytes (1 blocks)
file_open: dev=hda3, path=<NULL>
Drive 0 does not exist
devopen: failed to open ide
malloc_diag: alloc: 296 bytes (4 blocks), free: 16080 bytes (1 blocks)
malloc_diag: alloc: 280 bytes (3 blocks), free: 16096 bytes (1 blocks)
boot: hda3
