LinuxBIOS-2.0.0.0-Fallback Thu Jul 26 03:41:44 EDT 2007 starting... Enabling Via V-Link Enabling mainboard devices IDE controller found at 0x00079000 Copying LinuxBIOS to RAM. Jumping to LinuxBIOS. LinuxBIOS-2.0.0.0-Fallback Thu Jul 26 03:53:43 EDT 2007 booting... end 7f51e712, start 0 32-bit delta 1952 calibrate_tsc 32-bit result is 1952 clocks_per_usec: 1952 Enumerating buses... scan_static_bus for Root Device In cn700 enable_dev for device APIC_CLUSTER: 0. APIC_CLUSTER: 0 enabled In cn700 enable_dev for device PCI_DOMAIN: 0000. Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled PCI_DOMAIN: 0000 scanning... Entering cn700 pci_domain_scan_bus. PCI: pci_scan_bus for bus 00 In cn700 enable_dev for device PCI: 00:00.0. PCI: 00:00.0 [1106/0314] ops PCI: 00:00.0 [1106/0314] enabled In cn700 enable_dev for device PCI: 00:00.1. PCI: 00:00.1 [1106/1314] enabled In cn700 enable_dev for device PCI: 00:00.2. PCI: 00:00.2 [1106/2314] enabled In cn700 enable_dev for device PCI: 00:00.3. PCI: 00:00.3 [1106/3208] enabled In cn700 enable_dev for device PCI: 00:00.4. PCI: 00:00.4 [1106/4314] enabled PCI: devfn 0x5, bad id 0xffffffff PCI: devfn 0x6, bad id 0xffffffff In cn700 enable_dev for device PCI: 00:00.7. PCI: 00:00.7 [1106/7314] enabled In cn700 enable_dev for device PCI: 00:01.0. PCI: 00:01.0 [1106/b198] bus ops PCI: 00:01.0 [1106/b198] enabled PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff malloc Enter, size 668, free_mem_ptr 0001e000 malloc 0x0001e000 PCI: 00:0a.0 [1106/3044] enabled PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff In vt8237r_enable 1106 3149. PCI: 00:0f.0 [1106/3149] ops PCI: 00:0f.0 [1106/3149] enabled In vt8237r_enable 1106 0571. PCI: 00:0f.1 [1106/0571] ops PCI: 00:0f.1 [1106/0571] enabled PCI: devfn 0x7a, bad id 0xffffffff PCI: devfn 0x7b, bad id 0xffffffff PCI: devfn 0x7c, bad id 0xffffffff PCI: devfn 0x7d, bad id 0xffffffff PCI: devfn 0x7e, bad id 0xffffffff PCI: devfn 0x7f, bad id 0xffffffff In vt8237r_enable 1106 3038. PCI: 00:10.0 [1106/3038] ops PCI: 00:10.0 [1106/3038] enabled In vt8237r_enable 1106 3038. PCI: 00:10.1 [1106/3038] ops PCI: 00:10.1 [1106/3038] enabled In vt8237r_enable 1106 3038. PCI: 00:10.2 [1106/3038] ops PCI: 00:10.2 [1106/3038] enabled In vt8237r_enable 1106 3038. PCI: 00:10.3 [1106/3038] ops PCI: 00:10.3 [1106/3038] enabled malloc Enter, size 668, free_mem_ptr 0001e29c malloc 0x0001e29c PCI: 00:10.4 [1106/3104] ops PCI: 00:10.4 [1106/3104] enabled malloc Enter, size 668, free_mem_ptr 0001e538 malloc 0x0001e538 PCI: 00:10.5 [1106/d104] enabled PCI: devfn 0x86, bad id 0xffffffff PCI: devfn 0x87, bad id 0xffffffff In vt8237r_enable 1106 3227. Initialising Devices PCI: 00:11.0 [1106/3227] bus ops PCI: 00:11.0 [1106/3227] enabled PCI: devfn 0x89, bad id 0xffffffff PCI: devfn 0x8a, bad id 0xffffffff PCI: devfn 0x8b, bad id 0xffffffff PCI: devfn 0x8c, bad id 0xffffffff In vt8237r_enable 1106 3059. PCI: 00:11.5 [1106/3059] ops PCI: 00:11.5 [1106/3059] enabled In vt8237r_enable ffff ffff. PCI: devfn 0x8f, bad id 0xffffffff In vt8237r_enable 1106 3065. PCI: 00:12.0 [1106/3065] ops PCI: 00:12.0 [1106/3065] enabled PCI: devfn 0x98, bad id 0xffffffff PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff do_pci_scan_bridge for PCI: 00:01.0 PCI: pci_scan_bus for bus 01 PCI: devfn 0x0, bad id 0xffffffff PCI: devfn 0x8, bad id 0xffffffff PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: devfn 0x88, bad id 0xffffffff PCI: devfn 0x90, bad id 0xffffffff PCI: devfn 0x98, bad id 0xffffffff PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff PCI: pci_scan_bus returning with max=001 do_pci_scan_bridge returns max 1 scan_static_bus for PCI: 00:11.0 scan_static_bus for PCI: 00:11.0 done PCI: pci_scan_bus returning with max=001 scan_static_bus for Root Device done done Allocating resources... Reading resources... Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 Entering cn700 pci_domain_read_resources. Leaving cn700 pci_domain_read_resources. PCI_DOMAIN: 0000 read_resources bus 0 link: 0 PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done Root Device read_resources bus 0 link: 0 done PCI: 00:0f.0 24 * [0x00000400 - 0x000004ff] io PCI: 00:11.5 10 * [0x00000800 - 0x000008ff] io PCI: 00:12.0 10 * [0x00000c00 - 0x00000cff] io PCI: 00:0a.0 14 * [0x00001000 - 0x0000107f] io PCI: 00:10.0 20 * [0x00001080 - 0x0000109f] io PCI: 00:10.1 20 * [0x000010a0 - 0x000010bf] io PCI: 00:10.2 20 * [0x000010c0 - 0x000010df] io PCI: 00:10.3 20 * [0x000010e0 - 0x000010ff] io PCI: 00:0f.0 20 * [0x00001400 - 0x0000140f] io PCI: 00:0f.1 20 * [0x00001410 - 0x0000141f] io PCI: 00:0f.0 10 * [0x00001420 - 0x00001427] io PCI: 00:0f.0 18 * [0x00001430 - 0x00001437] io PCI: 00:0f.0 14 * [0x00001440 - 0x00001443] io PCI: 00:0f.0 1c * [0x00001450 - 0x00001453] io Root Device compute_allocate_io: base: 00001454 size: 00001054 align: 8 gran: 0 done Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:0a.0 10 * [0x00000000 - 0x000007ff] mem PCI: 00:10.4 10 * [0x00001000 - 0x000010ff] mem PCI: 00:10.5 10 * [0x00002000 - 0x000020ff] mem PCI: 00:12.0 14 * [0x00003000 - 0x000030ff] mem Root Device compute_allocate_mem: base: 00003100 size: 00003100 align: 11 gran: 0 done Done reading resources. Setting resources... Root Device compute_allocate_io: base: 00001000 size: 00001054 align: 8 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:0f.0 24 * [0x00001000 - 0x000010ff] io PCI: 00:11.5 10 * [0x00001400 - 0x000014ff] io PCI: 00:12.0 10 * [0x00001800 - 0x000018ff] io PCI: 00:0a.0 14 * [0x00001c00 - 0x00001c7f] io PCI: 00:10.0 20 * [0x00001c80 - 0x00001c9f] io PCI: 00:10.1 20 * [0x00001ca0 - 0x00001cbf] io PCI: 00:10.2 20 * [0x00001cc0 - 0x00001cdf] io PCI: 00:10.3 20 * [0x00001ce0 - 0x00001cff] io PCI: 00:0f.0 20 * [0x00002000 - 0x0000200f] io PCI: 00:0f.1 20 * [0x00002010 - 0x0000201f] io PCI: 00:0f.0 10 * [0x00002020 - 0x00002027] io PCI: 00:0f.0 18 * [0x00002030 - 0x00002037] io PCI: 00:0f.0 14 * [0x00002040 - 0x00002043] io PCI: 00:0f.0 1c * [0x00002050 - 0x00002053] io Root Device compute_allocate_io: base: 00002054 size: 00001054 align: 8 gran: 0 done Root Device compute_allocate_mem: base: febfc800 size: 00003100 align: 11 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:0a.0 10 * [0xfebfd000 - 0xfebfd7ff] mem PCI: 00:10.4 10 * [0xfebfe000 - 0xfebfe0ff] mem PCI: 00:10.5 10 * [0xfebff000 - 0xfebff0ff] mem PCI: 00:12.0 14 * [0xfec00000 - 0xfec000ff] mem Root Device compute_allocate_mem: base: fec00100 size: 00003900 align: 11 gran: 0 done Root Device assign_resources, bus 0 link: 0 Entering cn700 pci_domain_set_resources. mc_dev located at 0x11660 ERROR! register 0x5b is not set! ERROR! register 0x5c is not set! ERROR! register 0x5d is not set! I would set ram size to 0x204000 Kbytes PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 PCI: 00:0a.0 10 <- [0x00febfd000 - 0x00febfd7ff] mem PCI: 00:0a.0 14 <- [0x0000001c00 - 0x0000001c7f] io PCI: 00:0f.0 10 <- [0x0000002020 - 0x0000002027] io PCI: 00:0f.0 14 <- [0x0000002040 - 0x0000002043] io PCI: 00:0f.0 18 <- [0x0000002030 - 0x0000002037] io PCI: 00:0f.0 1c <- [0x0000002050 - 0x0000002053] io PCI: 00:0f.0 20 <- [0x0000002000 - 0x000000200f] io PCI: 00:0f.0 24 <- [0x0000001000 - 0x00000010ff] io PCI: 00:0f.1 20 <- [0x0000002010 - 0x000000201f] io PCI: 00:10.0 20 <- [0x0000001c80 - 0x0000001c9f] io PCI: 00:10.1 20 <- [0x0000001ca0 - 0x0000001cbf] io PCI: 00:10.2 20 <- [0x0000001cc0 - 0x0000001cdf] io PCI: 00:10.3 20 <- [0x0000001ce0 - 0x0000001cff] io PCI: 00:10.4 10 <- [0x00febfe000 - 0x00febfe0ff] mem PCI: 00:10.5 10 <- [0x00febff000 - 0x00febff0ff] mem PCI: 00:11.5 10 <- [0x0000001400 - 0x00000014ff] io PCI: 00:12.0 10 <- [0x0000001800 - 0x00000018ff] io PCI: 00:12.0 14 <- [0x00fec00000 - 0x00fec000ff] mem PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 Root Device assign_resources, bus 0 link: 0 Done setting resources. Done allocating resources. Enabling resources... PCI: 00:00.0 cmd <- 146 PCI: 00:00.1 subsystem <- 00/00 PCI: 00:00.1 cmd <- 146 PCI: 00:00.2 subsystem <- 00/00 PCI: 00:00.2 cmd <- 146 PCI: 00:00.3 subsystem <- 00/00 PCI: 00:00.3 cmd <- 146 PCI: 00:00.4 subsystem <- 00/00 PCI: 00:00.4 cmd <- 146 PCI: 00:00.7 subsystem <- 00/00 PCI: 00:00.7 cmd <- 146 PCI: 00:01.0 bridge ctrl <- 0003 PCI: 00:01.0 cmd <- 147 PCI: 00:0a.0 cmd <- 1c3 PCI: 00:0f.0 cmd <- 141 PCI: 00:0f.1 cmd <- 147 PCI: 00:10.0 cmd <- 141 PCI: 00:10.1 cmd <- 141 PCI: 00:10.2 cmd <- 141 PCI: 00:10.3 cmd <- 141 PCI: 00:10.4 cmd <- 142 PCI: 00:10.5 cmd <- 142 PCI: 00:11.0 cmd <- 1c7 PCI: 00:11.5 cmd <- 141 PCI: 00:12.0 cmd <- 1c3 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init malloc Enter, size 668, free_mem_ptr 0001e7d4 malloc 0x0001e7d4 Initializing CPU #0 CPU: vendor Centaur device 6a9 CPU: family 06, model 0a, stepping 09 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB Setting fixed MTRRs(24-88) Type: WB DONE fixed MTRRs call enable_fixed_mtrr() Setting variable MTRR 0, base: 0MB, range: 512MB, type WB ADDRESS_MASK_HIGH=0xf DONE variable MTRRs Clear out the extra MTRR's call enable_var_mtrr() Leave x86_setup_var_mtrrs MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled Disabling local apic...done. CPU #0 Initialized PCI: 00:00.0 init PCI: 00:00.1 init PCI: 00:00.2 init PCI: 00:00.3 init PCI: 00:00.4 init PCI: 00:00.7 init PCI: 00:01.0 init PCI: 00:0f.0 init Configuring VIA SATA Controller PCI: 00:0f.1 init Enabling Via IDE ide_init: enabling compatibility IDE addresses enables in reg 0x42 0x9 enables in reg 0x42 read back as 0x9 enables in reg 0x9 0x8a enables in reg 0x9 read back as 0x8a command in reg 0x4 0x7 command in reg 0x4 reads back as 0x7 PCI: 00:10.0 init base address for this usb controller is 0xFA01 PCI: 00:10.1 init base address for this usb controller is 0xFB01 PCI: 00:10.2 init base address for this usb controller is 0xFC01 PCI: 00:10.3 init base address for this usb controller is 0xFD01 PCI: 00:11.0 init vt8237r init RTC Init Invalid CMOS LB checksum pci_routing_fixup: dev is 0000f440 setting usb1 Assigning IRQ 10 to 0:10.0 Readback = 10 pci_level_irq: current ints are 0x0 pci_level_irq: try to set ints 0x400 Assigning IRQ 10 to 0:10.1 Readback = 10 pci_level_irq: current ints are 0x400 pci_level_irq: try to set ints 0x400 Assigning IRQ 5 to 0:10.2 Readback = 5 pci_level_irq: current ints are 0x400 pci_level_irq: try to set ints 0x420 Assigning IRQ 5 to 0:10.3 Readback = 5 pci_level_irq: current ints are 0x420 pci_level_irq: try to set ints 0x420 Assigning IRQ 11 to 0:10.4 Readback = 11 pci_level_irq: current ints are 0x420 pci_level_irq: try to set ints 0xc20 Assigning IRQ 9 to 0:10.5 Readback = 9 pci_level_irq: current ints are 0xc20 pci_level_irq: try to set ints 0xe20 setting usb2 Assigning IRQ 5 to 0:10.0 Readback = 5 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 Assigning IRQ 5 to 0:10.1 Readback = 5 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 Assigning IRQ 11 to 0:10.2 Readback = 11 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 Assigning IRQ 11 to 0:10.3 Readback = 11 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 Assigning IRQ 9 to 0:10.4 Readback = 9 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 Assigning IRQ 10 to 0:10.5 Readback = 10 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 setting usb3 Assigning IRQ 10 to 0:11.5 Readback = 10 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 setting audio setting nic Assigning IRQ 11 to 0:10.0 Readback = 11 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 Assigning IRQ 11 to 0:10.1 Readback = 11 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 Assigning IRQ 9 to 0:10.2 Readback = 9 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 Assigning IRQ 9 to 0:10.3 Readback = 9 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 Assigning IRQ 10 to 0:10.4 Readback = 10 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 Assigning IRQ 5 to 0:10.5 Readback = 5 pci_level_irq: current ints are 0xe20 pci_level_irq: try to set ints 0xe20 setting vga setting pci slot pci_routing_fixup: DONE PCI: 00:11.5 init Enabling VIA AC'97 Audio. PCI: 00:12.0 init Configuring VIA Rhine LAN PCI: 00:0a.0 init PCI: 00:10.4 init PCI: 00:10.5 init Devices initialized Copying IRQ routing tables to 0xf0000...done. Verifing copy of IRQ routing tables at 0xf0000...done Checking IRQ routing table consistency... check_pirq_routing_table() - irq_routing_table located at: 0x000f0000 /home/amp/linuxbios/LinuxBIOSv2/src/arch/i386/boot/pirq_routing.c: 36:check_pirq_routing_table() - checksum is: 0xb7 but should be: 0x89 done. ACPI: Writing ACPI tables at f0400... ACPI: * FACS ACPI: * DSDT @ 000f04a2 Length 589a ACPI: * FADT ACPI: added table 1/6 Length now 40 ACPI: done. Moving GDT to 0x500...ok Wrote linuxbios table at: 00000530 - 00000b70 checksum 6cdb Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfffc0000 - 0xfffdbfff Found ELF candidate at offset 0 header_offset is 0 Try to load at offset 0x0 malloc Enter, size 32, free_mem_ptr 0001ea70 malloc 0x0001ea70 New segment addr 0x100000 size 0x4d7c0 offset 0xc0 filesize 0x10328 (cleaned up) New segment addr 0x100000 size 0x4d7c0 offset 0xc0 filesize 0x10328 lb: [0x0000000000004000, 0x0000000000022000) malloc Enter, size 32, free_mem_ptr 0001ea90 malloc 0x0001ea90 New segment addr 0x14d7c0 size 0x48 offset 0x10400 filesize 0x48 (cleaned up) New segment addr 0x14d7c0 size 0x48 offset 0x10400 filesize 0x48 lb: [0x0000000000004000, 0x0000000000022000) Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x000000000004d7c0 filesz: 0x0000000000010328 [ 0x0000000000100000, 0000000000110328, 0x000000000014d7c0) <- 00000000000000c0 Clearing Segment: addr: 0x0000000000110328 memsz: 0x000000000003d498 Loading Segment: addr: 0x000000000014d7c0 memsz: 0x0000000000000048 filesz: 0x0000000000000048 [ 0x000000000014d7c0, 000000000014d808, 0x000000000014d808) <- 0000000000010400 Loaded segments verified segments closed down stream Jumping to boot code at 0x10beb0 entry = 0x0010beb0 lb_start = 0x00004000 lb_size = 0x0001e000 adjust = 0x1ffde000 buffer = 0x1ffc4000 elf_boot_notes = 0x00017cc0 adjusted_boot_notes = 0x1fff5cc0 FILO version 0.5 (amp@ampmobile) Thu Jul 26 03:53:27 EDT 2007 collect_sys_info: boot eax = 0xe1fb007 collect_sys_info: boot ebx = 0x1fff5cc0 collect_sys_info: boot arg = 0x1fff5cc0 malloc_diag: alloc: 0 bytes (0 blocks), free: 65528 bytes (1 blocks) malloc_diag: alloc: 24 bytes (1 blocks), free: 65504 bytes (1 blocks) collect_elfboot_info: Bootloader: elfboot collect_elfboot_info: Version: 1.3 malloc_diag: alloc: 40 bytes (2 blocks), free: 65488 bytes (1 blocks) collect_linuxbios_info: Searching for LinuxBIOS tables... find_lb_table: Found canidate at: 00000530 find_lb_table: header checksum o.k. find_lb_table: table checksum o.k. find_lb_table: record count o.k. collect_linuxbios_info: Found LinuxBIOS table at: 00000530 convert_memmap: 0x00000000000000 0x00000000000bd4 16 convert_memmap: 0x00000000000bd4 0x0000000009f42c 1 convert_memmap: 0x000000000c0000 0x00000000030000 1 convert_memmap: 0x000000000f0000 0x00000000010000 16 convert_memmap: 0x00000000100000 0x0000001ff00000 1 collect_sys_info: 0000000000000bd4-00000000000a0000 collect_sys_info: 00000000000c0000-00000000000f0000 collect_sys_info: 0000000000100000-0000000020000000 collect_sys_info: RAM 512 MB relocate: Current location: 0x100000-0x14d807 relocate: Relocating to 0x1ffb27f0-0x1ffffff7... ok setup_timers: CPU 800 MHz pci_init: Scanning PCI: found 19 devices malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) pci_init: 00:00.0 1106:0314 0600 00 pci_init: 00:00.1 1106:1314 0600 00 pci_init: 00:00.2 1106:2314 0600 00 pci_init: 00:00.3 1106:3208 0600 00 pci_init: 00:00.4 1106:4314 0600 00 pci_init: 00:00.7 1106:7314 0600 00 pci_init: 00:01.0 1106:b198 0604 00 pci_init: 00:0a.0 1106:3044 0c00 10 pci_init: 00:0f.0 1106:3149 0101 8f pci_init: 00:0f.1 1106:0571 0101 8a pci_init: 00:10.0 1106:3038 0c03 00 pci_init: 00:10.1 1106:3038 0c03 00 pci_init: 00:10.2 1106:3038 0c03 00 pci_init: 00:10.3 1106:3038 0c03 00 pci_init: 00:10.4 1106:3104 0c03 20 pci_init: 00:10.5 1106:d104 0280 00 pci_init: 00:11.0 1106:3227 0601 00 pci_init: 00:11.5 1106:3059 0401 00 pci_init: 00:12.0 1106:3065 0200 00 No sound device found boot: sda1:/vmlinuz initrd=/initrd.gz root=/dev/sda1 malloc_diag: alloc: 336 bytes (4 blocks), free: 65192 bytes (1 blocks) malloc_diag: alloc: 352 bytes (5 blocks), free: 65176 bytes (1 blocks) file_open: dev=sda1, path=/vmlinuz Unknown device type devopen: failed to parse device name: sda1 malloc_diag: alloc: 336 bytes (4 blocks), free: 65192 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) fallback boot: sda1:/vmlinuz initrd=/initrd.gz root=/dev/sda1 malloc_diag: alloc: 336 bytes (4 blocks), free: 65192 bytes (1 blocks) malloc_diag: alloc: 352 bytes (5 blocks), free: 65176 bytes (1 blocks) file_open: dev=hda1, path=/vmlinuz find_ide_controller: found PCI IDE controller 1106:3149 prog_if=0x8f find_ide_controller: primary channel: native PCI mode find_ide_controller: cmd_base=0x2020 ctrl_base=0x2040 ide_software_reset: Waiting for ide0 to become ready for reset... ok init_drive: Testing for hda init_drive: Probing for hda init_drive: LBA mode, sectors=160836480 init_drive: LBA48 mode, sectors=160836480 init_drive: Init device params... ok hda: LBA48 82GB: HDS728080PLA380 init_drive: Testing for hdb init_drive: Testing for hdb ide_readmany: sector 0 to 001105c0 devopen: Partition 1 start 63 length 156456972 ide_readmany: sector 63 to 001183c0 ide_readmany: sector 65 to 001107c0 ide_readmany: sector 66 to 001109c0 Unknown filesystem type malloc_diag: alloc: 336 bytes (4 blocks), free: 65192 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hda malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hda, path= malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) elf_load: Not a bootable ELF image malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hda, path= devopen: already open malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) ide_readmany: sector 1 to 001107c0 load_linux_header: This looks like a bootdisk image but not like Linux... Unsupported image format malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hdah  b malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hdb, path= Drive 1 does not exist devopen: failed to open ide malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hdb v malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hdv, path= Unsupported drive number devopen: failed to open ide malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hdv c malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hdc, path= find_ide_controller: found PCI IDE controller 1106:3149 prog_if=0x8f find_ide_controller: secodary channel: native PCI mode find_ide_controller: cmd_base=0x2030 ctrl_base=0x2050 ide_software_reset: Waiting for ide1 to become ready for reset... ok IDE time out No drive detected on IDE channel 1 devopen: failed to open ide malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hdc d malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hdd, path= Drive 3 does not exist devopen: failed to open ide malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hdd e malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hde, path= find_ide_controller: found PCI IDE controller 1106:0571 prog_if=0x8a find_ide_controller: primary channel: compatibility mode find_ide_controller: cmd_base=0x1e8 ctrl_base=0x3ec Detected floating bus No drive detected on IDE channel 2 devopen: failed to open ide malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hde f malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hdf, path= Drive 5 does not exist devopen: failed to open ide malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hdf g malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hdg, path= find_ide_controller: found PCI IDE controller 1106:0571 prog_if=0x8a find_ide_controller: secodary channel: compatibility mode find_ide_controller: cmd_base=0x168 ctrl_base=0x36c Detected floating bus No drive detected on IDE channel 3 devopen: failed to open ide malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hdg h malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hdh, path= Drive 7 does not exist devopen: failed to open ide malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hdh i malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hdi, path= Unsupported drive number devopen: failed to open ide malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hdi j malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 312 bytes (5 blocks), free: 65216 bytes (1 blocks) file_open: dev=hdj, path= Unsupported drive number devopen: failed to open ide malloc_diag: alloc: 296 bytes (4 blocks), free: 65232 bytes (1 blocks) malloc_diag: alloc: 280 bytes (3 blocks), free: 65248 bytes (1 blocks) boot: hdj