LinuxBIOS-2.0.0_Fallback Tue Nov 30 00:17:20 EST 1999 starting... *sysinfo range: [000cf000,000cf730) bsp_apicid=00 01 nodes initialized. core0 started: SBLink=00 NC node|link=00 begin msr fid, vid 310a12120a0e0202 set vid failed for apicid =00 end msr fid, vid 310a120a0a0e020e ht reset - LinuxBIOS-2.0.0_Fallback Tue Nov 30 00:17:20 EST 1999 starting... *sysinfo range: [000cf000,000cf730) bsp_apicid=00 01 nodes initialized. core0 started: SBLink=00 NC node|link=00 begin msr fid, vid 310a120a0a0e020e end msr fid, vid 310a120a0a0e020e SMBus controller enabled Ram1.00 Ram2.00 device=00000650 SPD_MEM_TYPE=00000008 device=00000651 SPD_MEM_TYPE=fffffffd device=00000652 SPD_MEM_TYPE=fffffffd device=00000653 SPD_MEM_TYPE=fffffffd device=00000654 SPD_MEM_TYPE=fffffffd device=00000655 SPD_MEM_TYPE=fffffffd device=00000656 SPD_MEM_TYPE=fffffffd device=00000657 SPD_MEM_TYPE=fffffffd Registered 266Mhz Interleaved RAM: 0x00100000 KB Ram3 Initializing memory: done Setting variable MTRR 02, base: 0000MB, range: 0400MB, type WB DQS Training:RcvrEn:Pass1: 00 train_DqsRcvrEn: begin ctrl 00000000 TrainRcvEn: 0 ctrl00000000 CTLRMaxDelay=05 train_DqsRcvrEn: end ctrl 00000000 done DQS Training:DQSPos: 00 train_DqsPos: begin ctrl 00000000 TrainDQSRdWrPos: 0 ctrl 00000000 TrainDQSRdWrPos: 00000005 train_DqsPos: end ctrl 00000000 done DQS Training:RcvrEn:Pass2: 00 train_DqsRcvrEn: begin ctrl 00000000 TrainRcvEn: 0 ctrl00000000 CTLRMaxDelay=2d train_DqsRcvrEn: end ctrl 00000000 done DQS Training:tsc[00]=0000000060031c12 DQS Training:tsc[01]=0000000062f6361b DQS Training:tsc[02]=00000000acd1f640 DQS Training:tsc[03]=00000001a12f631d DQS Training:tsc[04]=00000001a61f8162 Ram4 v_esp=000cefc8 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying LinuxBIOS to RAM. src=fffe0000 dst=00100000 linxbios_ram.nrv2b length = 0000cdee linxbios_ram.bin length = 00020b30 Jumping to LinuxBIOS. LinuxBIOS-2.0.0_Fallback Tue Nov 30 00:17:20 EST 1999 booting... Enumerating buses... APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 00:00.0 [1166/0130] enabled PCI: 00:06.0 [1166/0130] enabled next_unitid: 000c PCI: 00:00.0 subbordinate bus PCI-X PCI: 00:00.0 [1166/0036] enabled PCI: 00:0c.0 [1166/0036] enabled next_unitid: 000f PCI: pci_scan_bus for bus 00 PCI: 00:01.0 [1166/0036] enabled PCI: 00:02.0 [1166/0205] enabled PCI: 00:02.1 [1166/0214] enabled PCI: 00:02.2 [1166/0234] enabled PCI: 00:02.3 [1166/0238] enabled PCI: 00:02.4 [1166/0235] enabled PCI: 00:02.5 [1166/0235] enabled PCI: 00:02.6 [1166/0235] enabled PCI: 00:03.0 [1166/0223] enabled PCI: 00:03.1 [1166/0223] enabled PCI: 00:03.2 [1166/0223] enabled PCI: 00:04.0 [8086/1229] enabled PCI: 00:06.0 [1166/0130] enabled PCI: 00:07.0 [1166/0130] enabled PCI: 00:08.0 [1166/0132] enabled PCI: 00:09.0 [1166/0132] enabled PCI: 00:0a.0 [1166/0132] enabled PCI: 00:0b.0 [1166/0132] enabled PCI: 00:0c.0 [1002/515e] enabled PCI: pci_scan_bus for bus 01 PCI: 01:0d.0 subbordinate bus PCI-X PCI: 01:0d.0 [1166/0104] enabled PCI: 01:0e.0 [1166/024a] enabled PCI: 01:0e.1 [1166/024a] enabled PCI: pci_scan_bus for bus 02 PCI: pci_scan_bus returning with max=002 PCI: 02: Conventional PCI PCI: pci_scan_bus returning with max=002 PCI: 01: 133MHz PCI-X PCI: pci_scan_bus for bus 03 PCI: pci_scan_bus returning with max=003 PCI: pci_scan_bus for bus 04 PCI: 04:04.0 [14e4/166a] enabled PCI: 04:04.1 [14e4/166a] enabled PCI: pci_scan_bus returning with max=004 PCI: pci_scan_bus for bus 05 PCI: pci_scan_bus returning with max=005 PCI: pci_scan_bus for bus 06 PCI: pci_scan_bus returning with max=006 PCI: pci_scan_bus for bus 07 PCI: pci_scan_bus returning with max=007 PCI: pci_scan_bus for bus 08 PCI: pci_scan_bus returning with max=008 PCI: pci_scan_bus returning with max=008 PCI: pci_scan_bus returning with max=008 done Allocating resources... Reading resources... PCI: 01:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io PCI: 01:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem PCI: 01:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem PCI: 00:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 01 prefmem PCI: 00:06.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io PCI: 00:06.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem PCI: 00:07.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io PCI: 00:07.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem PCI: 00:08.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io PCI: 00:08.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem PCI: 00:08.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem PCI: 00:09.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io PCI: 00:09.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem PCI: 00:09.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 08 io PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 08 prefmem PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 08 mem PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:01.4 missing read_resources PCI: 00:01.5 missing read_resources PCI: 00:01.6 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:02.1 missing read_resources PCI: 00:02.2 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:01.4 missing read_resources PCI: 00:01.5 missing read_resources PCI: 00:01.6 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:02.1 missing read_resources PCI: 00:02.2 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:01.4 missing read_resources PCI: 00:01.5 missing read_resources PCI: 00:01.6 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:02.1 missing read_resources PCI: 00:02.2 missing read_resources PCI: 00:03.0 missing read_resources Done reading resources. Allocating VGA resource PCI: 00:0c.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device PCI: 00:18.0 1b8 <- [0x00f0000000 - 0x00f7ffffff] prefmem PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io PCI: 00:18.0 1b0 <- [0x00fc000000 - 0x00fc2fffff] mem PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:01.4 missing read_resources PCI: 00:01.5 missing read_resources PCI: 00:01.6 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:02.1 missing read_resources PCI: 00:02.2 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:18.0 1da <- [0x0000004000 - 0x0000003fff] io PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:01.4 missing read_resources PCI: 00:01.5 missing read_resources PCI: 00:01.6 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:02.1 missing read_resources PCI: 00:02.2 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:18.0 1aa <- [0x00fc300000 - 0x00fc2fffff] prefmem PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:04.0 missing read_resources PCI: 00:05.0 missing read_resources PCI: 00:00.0 missing read_resources PCI: 00:01.0 missing read_resources PCI: 00:01.1 missing read_resources PCI: 00:01.2 missing read_resources PCI: 00:01.3 missing read_resources PCI: 00:01.4 missing read_resources PCI: 00:01.5 missing read_resources PCI: 00:01.6 missing read_resources PCI: 00:02.0 missing read_resources PCI: 00:02.1 missing read_resources PCI: 00:02.2 missing read_resources PCI: 00:03.0 missing read_resources PCI: 00:18.0 1a2 <- [0x00fc300000 - 0x00fc2fffff] mem PCI: 00:01.0 1c <- [0x0000001000 - 0x0000001fff] bus 01 io PCI: 00:01.0 20 <- [0x00fc000000 - 0x00fc0fffff] bus 01 mem PCI: 01:0e.0 10 <- [0x0000001030 - 0x0000001037] io PCI: 01:0e.0 14 <- [0x0000001070 - 0x0000001073] io PCI: 01:0e.0 18 <- [0x0000001040 - 0x0000001047] io PCI: 01:0e.0 1c <- [0x0000001080 - 0x0000001083] io PCI: 01:0e.0 20 <- [0x0000001000 - 0x000000101f] io PCI: 01:0e.0 24 <- [0x00fc020000 - 0x00fc021fff] mem PCI: 01:0e.0 30 <- [0x00fc000000 - 0x00fc01ffff] romem PCI: 01:0e.1 10 <- [0x0000001050 - 0x0000001057] io PCI: 01:0e.1 14 <- [0x0000001090 - 0x0000001093] io PCI: 01:0e.1 18 <- [0x0000001060 - 0x0000001067] io PCI: 01:0e.1 1c <- [0x00000010a0 - 0x00000010a3] io PCI: 01:0e.1 20 <- [0x0000001020 - 0x000000102f] io PCI: 00:02.0 90 <- [0x0000003040 - 0x000000304f] io PCI: 00:02.1 10 <- [0x0000003060 - 0x0000003067] io PCI: 00:02.1 14 <- [0x0000003080 - 0x0000003083] io PCI: 00:02.1 18 <- [0x0000003070 - 0x0000003077] io PCI: 00:02.1 1c <- [0x0000003090 - 0x0000003093] io PCI: 00:02.1 20 <- [0x0000003050 - 0x000000305f] io PCI: 00:02.1 64 <- [0x00000030a0 - 0x00000030a3] io PCI: 00:02.3 10 <- [0x00fc250000 - 0x00fc250fff] mem PCI: 00:02.4 10 <- [0x00fc251000 - 0x00fc251fff] mem PCI: 00:02.5 10 <- [0x00fc252000 - 0x00fc252fff] mem PCI: 00:02.6 10 <- [0x00fc253000 - 0x00fc253fff] mem PCI: 00:03.0 10 <- [0x00fc254000 - 0x00fc254fff] mem PCI: 00:03.0 14 <- [0x0000002000 - 0x00000020ff] io PCI: 00:03.1 10 <- [0x00fc255000 - 0x00fc255fff] mem PCI: 00:03.1 14 <- [0x0000002400 - 0x00000024ff] io PCI: 00:03.2 10 <- [0x00fc256000 - 0x00fc256fff] mem PCI: 00:03.2 14 <- [0x0000002800 - 0x00000028ff] io PCI: 00:04.0 10 <- [0x00fc257000 - 0x00fc257fff] mem PCI: 00:04.0 14 <- [0x0000003000 - 0x000000303f] io PCI: 00:04.0 18 <- [0x00fc200000 - 0x00fc21ffff] mem PCI: 00:07.0 20 <- [0x00fc100000 - 0x00fc1fffff] bus 04 mem PCI: 04:04.0 10 <- [0x00fc100000 - 0x00fc10ffff] mem64 PCI: 04:04.0 18 <- [0x00fc110000 - 0x00fc11ffff] mem64 PCI: 04:04.1 10 <- [0x00fc120000 - 0x00fc12ffff] mem64 PCI: 04:04.1 18 <- [0x00fc130000 - 0x00fc13ffff] mem64 PCI: 00:0c.0 10 <- [0x00f0000000 - 0x00f7ffffff] prefmem PCI: 00:0c.0 14 <- [0x0000002c00 - 0x0000002cff] io PCI: 00:0c.0 18 <- [0x00fc240000 - 0x00fc24ffff] mem PCI: 00:0c.0 30 <- [0x00fc220000 - 0x00fc23ffff] romem PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem Done setting resources. Done allocating resources. Enabling resources... PCI: 00:18.0 cmd <- 140 PCI: 00:01.0 bridge ctrl <- 0003 PCI: 00:01.0 cmd <- 147 PCI: 01:0d.0 bridge ctrl <- 0003 PCI: 01:0d.0 cmd <- 140 PCI: 01:0e.0 cmd <- 143 PCI: 01:0e.1 cmd <- 141 PCI: 00:02.0 cmd <- 147 PCI: 00:02.1 cmd <- 141 PCI: 00:02.2 cmd <- 144 PCI: 00:02.3 cmd <- 146 PCI: 00:02.4 cmd <- 146 PCI: 00:02.5 cmd <- 146 PCI: 00:02.6 cmd <- 146 PCI: 00:03.0 cmd <- 143 PCI: 00:03.1 cmd <- 143 PCI: 00:03.2 cmd <- 143 PCI: 00:04.0 cmd <- 143 PCI: 00:06.0 bridge ctrl <- 0003 PCI: 00:06.0 cmd <- 140 PCI: 00:07.0 bridge ctrl <- 0003 PCI: 00:07.0 cmd <- 146 PCI: 04:04.0 cmd <- 142 PCI: 04:04.1 cmd <- 142 PCI: 00:08.0 bridge ctrl <- 0003 PCI: 00:08.0 cmd <- 140 PCI: 00:09.0 bridge ctrl <- 0003 PCI: 00:09.0 cmd <- 140 PCI: 00:0a.0 bridge ctrl <- 0003 PCI: 00:0a.0 cmd <- 140 PCI: 00:0b.0 bridge ctrl <- 0003 PCI: 00:0b.0 cmd <- 140 PCI: 00:0c.0 cmd <- 1c3 PCI: 00:00.0 missing enable_resources PCI: 00:01.0 missing enable_resources PCI: 00:02.0 missing enable_resources PCI: 00:03.0 missing enable_resources PCI: 00:04.0 missing enable_resources PCI: 00:05.0 missing enable_resources PCI: 00:00.0 missing enable_resources PCI: 00:01.0 missing enable_resources PCI: 00:01.1 missing enable_resources PCI: 00:01.2 missing enable_resources PCI: 00:01.3 missing enable_resources PCI: 00:01.4 missing enable_resources PCI: 00:01.5 missing enable_resources PCI: 00:01.6 missing enable_resources PCI: 00:02.0 missing enable_resources PCI: 00:02.1 missing enable_resources PCI: 00:02.2 missing enable_resources PCI: 00:03.0 missing enable_resources PCI: 00:18.1 subsystem <- 1022/2b80 PCI: 00:18.1 cmd <- 140 PCI: 00:18.2 subsystem <- 1022/2b80 PCI: 00:18.2 cmd <- 140 PCI: 00:18.3 cmd <- 140 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init start_eip=0x00005000, offset=0x00110000, code_size=0x0000005b Initializing CPU #1 Initializing CPU #0 CPU: vendor AMD device 40f11 CPU: vendor AMD device 40f11 CPU: family 0f, model 41, stepping 01 CPU: family 0f, model 41, stepping 01 brandId=02c0 brandId=02c0 Enabling cache Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB Setting variable MTRR 0, base: 0MB, range: 1024MB, type WB DONE variable MTRRs Clear out the extra MTRR's DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled CPU model AMD Turion(tm) 64 Mobile Technology MT-22 CPU model AMD Turion(tm) 64 Mobile Technology MT-22 Setting up local apic...Setting up local apic... apic_id: 0x00 done. apic_id: 0x01 done. Clearing memory 2048K - 1048576K: CPU #1 Initialized --------------- done CPU #0 Initialized All AP CPUs stopped PCI: 00:18.0 init PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:02.0 init PCI: 00:02.1 init PCI: 00:02.2 init RTC Init Invalid CMOS LB checksum PCI: 00:02.3 init PCI: 00:02.4 init PCI: 00:02.5 init PCI: 00:02.6 init PCI: 00:03.0 init PCI: 00:03.1 init PCI: 00:03.2 init PCI: 00:04.0 init PCI: 00:08.0 init PCI: 00:09.0 init PCI: 00:0a.0 init PCI: 00:0b.0 init PCI: 00:0c.0 init rom address for PCI: 00:0c.0 = fc220000 BTDC: device class = 0 BTDC: device class = 3 BTDC: set rom_address manually copying VGA ROM Image from 0xfff80000 to 0xc0000, 0x9000 bytes entering emulator un-inited int vector halt_sys: file /home/fengl/LinuxBIOSv2-2584/src/devices/emulator/x86emu/ops.c, l ine 4387 PCI: 01:0e.0 init init PHY... port 0 PHY status = 04 after reset port 0 PHY status = 04 port 1 PHY status = 04 after reset port 1 PHY status = 04 port 2 PHY status = 04 after reset port 2 PHY status = 04 port 3 PHY status = 04 after reset port 3 PHY status = 04 PCI: 01:0e.1 init PCI: 04:04.0 init PCI: 04:04.1 init Devices initialized bus_isa=4 bus_isa=5 bus_isa=6 bus_isa=7 bus_isa=8 bus_isa=9 Writing IRQ routing tables to 0xf0000...done. Wrote the mp table end at: 00000020 - 0000024c Moving GDT to 0x500...ok Wrote linuxbios table at: 00000530 - 00000ddc checksum 6176 Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfffc0000 - 0xfffdffff Found ELF candidate at offset 0 New segment addr 0x100000 size 0x3c320 offset 0xc0 filesize 0x12368 (cleaned up) New segment addr 0x100000 size 0x3c320 offset 0xc0 filesize 0x12368 New segment addr 0x13c320 size 0x48 offset 0x12440 filesize 0x48 (cleaned up) New segment addr 0x13c320 size 0x48 offset 0x12440 filesize 0x48 Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x000000003ff6c000 memsz: 0x000000000003c320 filesz: 0x00 00000000012368 Clearing Segment: addr: 0x000000003ff7e368 memsz: 0x0000000000029fb8 Loading Segment: addr: 0x000000003ffa8320 memsz: 0x0000000000000048 filesz: 0x00 00000000000048 Jumping to boot code at 0x10dab4 FILO version 0.5 (fengl@localhost.localdomain) Sat Jul 7 02:41:14 CST 2007 menu: hda1:/grub/grub.conf hda: LBA 20GB: IC35L020AVVA07-0 hdb: ATAPI: ASUS DVD-E616A2 Mounted ext2fs Found Linux version 2.6.9-22.ELsmp (bhcompile@crowe.devel.redhat.com) #1 SMP Mon Sep 19 18:00:54 EDT 2005 bzImage. Loading kernel... ok Loading initrd... ok Jumping to entry point... Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 console=tty0 conso le=ttyS0,115200n8) Linux version 2.6.9-22.ELsmp (bhcompile@crowe.devel.redhat.com) (gcc version 3.4 .4 20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 18:00:54 EDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000e44 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 0000000040000000 (usable) ACPI: Unable to locate RSDP Enabling SRAT NUMA discovery Warning: acpi_table_parse(ACPI_SRAT) returned 0! Warning: acpi_table_parse(ACPI_SLIT) returned 0! acpi_numa_init() failed, disabling ACPI NUMA config Scanning NUMA topology in Northbridge 24 Number of nodes 1 (10000) Node 0 MemBase 0000000000000000 Limit 000000003fffffff Using node hash shift of 23 Bootmem setup node 0 0000000000000000-000000003fffffff DMI not present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: MSI <6>Product ID: MS9185 <6>APIC at: 0xFEE00000 Processor #0 15:1 APIC version 16 Processor #1 15:1 APIC version 16 I/O APIC #2 Version 17 at 0xFC251000. I/O APIC #3 Version 17 at 0xFC252000. I/O APIC #4 Version 17 at 0xFC253000. Processors: 2 Checking aperture... CPU 0: aperture @ f8000000 size 64 MB Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS0 ,115200n8 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2194.613 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1024292k/1048576k available (2077k kernel code, 0k reserved, 1276k data, 188k init) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Node 0 CPU0: Physical Processor ID: 0 CPU0: Processor Core ID: 0 CPU0: Initial APIC ID: 0 Using local APIC NMI watchdog using perfctr0 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Node 0 CPU0: Physical Processor ID: 0 CPU0: Processor Core ID: 0 CPU0: Initial APIC ID: 0 CPU0: AMD Turion(tm) 64 Mobile Technology MT-22 stepping 01 per-CPU timeslice cutoff: 1024.20 usecs. task migration cache decay timeout: 2 msecs. Booting processor 1/1 rip 6000 rsp 10002195f58 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(2) -> Node 0 CPU1: Physical Processor ID: 0 CPU1: Processor Core ID: 1 CPU1: Initial APIC ID: 1 AMD Turion(tm) 64 Mobile Technology MT-22 stepping 01 Total of 2 processors activated (8699.90 BogoMIPS). Using IO-APIC 2 Using IO-APIC 3 Using IO-APIC 4 Using local APIC timer interrupts. Detected 12.469 MHz APIC timer. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs time.c: Using PIT/TSC based timekeeping. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter disabled. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.1 PCI: Using IRQ router default [1166/0036] at 0000:00:01.0 PCI->APIC IRQ transform: (B0,I3,P0) -> 10 PCI->APIC IRQ transform: (B0,I3,P0) -> 10 PCI->APIC IRQ transform: (B0,I3,P0) -> 10 PCI->APIC IRQ transform: (B0,I4,P0) -> 161 PCI->APIC IRQ transform: (B1,I14,P0) -> 15 PCI->APIC IRQ transform: (B1,I14,P0) -> 15 PCI->APIC IRQ transform: (B4,I4,P0) -> 217 PCI->APIC IRQ transform: (B4,I4,P1) -> 225 PCI-DMA: Disabling IOMMU. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1009844191.675:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key BFA28740EEFE8097 - key was been created 117322263 seconds in future - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones i8042.c: No controller found. Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ?ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: IC35L020AVVA07-0, ATA DISK drive hdb: ASUS DVD-E616A2, ATAPI CD/DVD-ROM drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 39874367 sectors (20415 MB) native capacity is 39876480 sectors (20416 MB) hda: 39874367 sectors (20415 MB) w/1863KiB Cache, CHS=39557/16/63 hda: hda1 hda2 hdb: ATAPI 48X DVD-ROM drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 64Kbytes TCP: Hash tables configured (established 131072 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Processor cpuid 40f11 not supported powernow-k8: Processor cpuid 40f11 not supported Freeing unused kernel memory: 188k freed Red Hat nash version 4.2.1.6 starting Mounted /proc filesystem Mounting sysfs Creating /dev Starting udev Loading dm-mod.ko module device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com Loading jbd.ko module Loading ext3.ko module Loading dm-mirror.ko module Loading dm-zero.ko module Loading dm-snapshot.ko module Making device-mapper control node Scanning logical volumes Reading all physical volumes. This may take a while... cdrom: open failed. Found volume group "VolGroup00" using metadata type lvm2 Activating logical volumes 2 logical volume(s) in volume group "VolGroup00" now active Creating root device Mounting root filesystem kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Switching to new root security: 3 users, 4 roles, 349 types, 25 bools security: 55 classes, 18746 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labelin g SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts INIT: version 2.85 booting SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts Welcome to Red Hat Enterprise Linux ES Press 'I' to enter interactive startup. Hardware Discovery Utility 1.1.95.15 (C) 2003 Red Hat, Inc. €aĦħĦè Welc ome to Ku aĦħ? aĦħ? aĦħ? aĦħ? aĦħ? aĦħ? aĦħ? aĦħ? aĦħ? aĦħ? aĦħ? aĦħ? aĦħ€aĦħ€aĦħ €aĦħ€aĦħ€aĦħ€ €aĦħ€aĦħ€a Ħħ€aĦħ€aĦħ€aĦħ€aĦħ€aĦħ€aĦħ€aĦħ€aĦħ€aĦħ€aĦħ€aĦħ? [FAILED] Hardware configuration timed out.Run '/usr/sbin/kudzu' from the command line to re-detect.Applying iptables firewall rules: [ OK ] Starting pcmcia: [ OK ] Setting network parameters: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed; no link present. Check cable? [FAILED] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting irqbalance: [ OK ] Starting portmap: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: [ OK ] Mounting other filesystems: [ OK ] Starting automount: No Mountpoints Defined[ OK ] Starting smartd: [ OK ] Starting cups: [ OK ] Starting sshd:[ OK ] Starting xinetd: [ OK ] Starting sendmail: make: Warning: File `Makefile' has modification time 8.4e+07 s in the future make: warning: Clock skew detected. Your build may be incomplete. [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] Starting system message bus: [ OK ] Starting HAL daemon: [ OK ] Red Hat Enterprise Linux ES release 4 (Nahant Update 2) Kernel 2.6.9-22.ELsmp on an x86_64 localhost.localdomain login: root Password: Last login: Tue Jan 1 00:13:10 on ttyS0 [root@localhost ~]# ls anaconda-ks.cfg install.log install.log.syslog LinuxBIOSv2 [root@localhost ~]#