[ 0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] Command line: acpi=off pci=noacpi,nobios console=tty0 console=ttyS0,115200 root=UUID=3bd44ac7-3a5b-4d3a-b452-fbbc051c9f8d ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] PCI: Unknown option `nobios' [ 0.000000] Entering add_active_range(0, 1, 160) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 192, 240) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524288) 2 entries of 3200 used [ 0.000000] end_pfn_map = 524288 [ 0.000000] DMI not present or invalid. [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000080000000 [ 0.000000] Entering add_active_range(0, 1, 160) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 192, 240) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524288) 2 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 1 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 1 -> 160 [ 0.000000] 0: 192 -> 240 [ 0.000000] 0: 256 -> 524288 [ 0.000000] On node 0 totalpages: 524239 [ 0.000000] DMA zone: 55 pages used for memmap [ 0.000000] DMA zone: 1084 pages reserved [ 0.000000] DMA zone: 2908 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513080 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: GIGABYTE MPTABLE: Product ID: M57SLI MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #2 at 0xFC044000. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Processors: 2 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000c0000 [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:80000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515988 [ 0.000000] Kernel command line: acpi=off pci=noacpi,nobios console=tty0 console=ttyS0,115200 root=UUID=3bd44ac7-3a5b-4d3a-b452-fbbc051c9f8d ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 14.023692] Console: colour dummy device 80x25 [ 14.245993] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 14.254356] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 14.261844] Checking aperture... [ 14.265089] CPU 0: aperture @ f8000000 size 64 MB [ 14.285280] Memory: 2053392k/2097152k available (2217k kernel code, 43564k reserved, 1162k data, 304k init) [ 14.372691] Calibrating delay using timer specific routine.. 4007.29 BogoMIPS (lpj=8014599) [ 14.381109] Security Framework v1.0.0 initialized [ 14.385820] SELinux: Disabled at boot. [ 14.389678] Mount-cache hash table entries: 256 [ 14.394333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 14.401467] CPU: L2 Cache: 512K (64 bytes/line) [ 14.405998] CPU 0/0 -> Node 0 [ 14.408974] CPU: Physical Processor ID: 0 [ 14.412985] CPU: Processor Core ID: 0 [ 14.416672] SMP alternatives: switching to UP code [ 14.421680] Early unpacking initramfs... done [ 14.787084] Using local APIC timer interrupts. [ 14.841432] result 12500078 [ 14.844223] Detected 12.500 MHz APIC timer. [ 14.851979] SMP alternatives: switching to SMP code [ 14.856953] Booting processor 1/2 APIC 0x1 [ 14.871307] Initializing CPU#1 [ 14.951584] Calibrating delay using timer specific routine.. 4000.37 BogoMIPS (lpj=8000745) [ 14.951591] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 14.951593] CPU: L2 Cache: 512K (64 bytes/line) [ 14.951595] CPU 1/1 -> Node 0 [ 14.951597] CPU: Physical Processor ID: 0 [ 14.951598] CPU: Processor Core ID: 1 [ 14.951675] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 14.955579] CPU 1: Syncing TSC to CPU 0. [ 14.955674] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 522 cycles) [ 14.955684] Brought up 2 CPUs [ 15.010660] time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer. [ 15.016917] time.c: Detected 2000.010 MHz processor. [ 15.661842] migration_cost=163 [ 15.665258] Time: 2:15:49 Date: 08/16/107 [ 15.669481] NET: Registered protocol family 16 [ 15.674295] PCI: Using configuration type 1 [ 15.679010] ACPI: Interpreter disabled. [ 15.682856] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.688516] pnp: PnP ACPI: disabled [ 15.692058] PCI: Probing PCI hardware [ 15.695725] PCI: Probing PCI hardware (bus 00) [ 15.697445] PCI: Using IRQ router default [10de/0370] at 0000:00:06.0 [ 15.703914] PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10 [ 15.709750] PCI->APIC IRQ transform: 0000:00:01.3[B] -> IRQ 10 [ 15.715573] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 22 [ 15.721404] PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 23 [ 15.727234] PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 20 [ 15.733065] PCI->APIC IRQ transform: 0000:00:05.1[B] -> IRQ 23 [ 15.738892] PCI->APIC IRQ transform: 0000:00:05.2[C] -> IRQ 21 [ 15.744723] PCI->APIC IRQ transform: 0000:00:06.1[B] -> IRQ 23 [ 15.750552] PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22 [ 15.756447] NET: Registered protocol family 8 [ 15.760803] NET: Registered protocol family 20 [ 15.765630] PCI: Bridge: 0000:00:06.0 [ 15.769300] IO window: disabled. [ 15.772724] MEM window: disabled. [ 15.776226] PREFETCH window: disabled. [ 15.780152] PCI: Bridge: 0000:00:0a.0 [ 15.783818] IO window: disabled. [ 15.787219] MEM window: disabled. [ 15.790713] PREFETCH window: disabled. [ 15.794641] PCI: Bridge: 0000:00:0b.0 [ 15.798307] IO window: disabled. [ 15.801708] MEM window: disabled. [ 15.805202] PREFETCH window: disabled. [ 15.809128] PCI: Bridge: 0000:00:0c.0 [ 15.812796] IO window: disabled. [ 15.816206] MEM window: disabled. [ 15.819699] PREFETCH window: disabled. [ 15.823625] PCI: Bridge: 0000:00:0d.0 [ 15.827294] IO window: disabled. [ 15.830702] MEM window: disabled. [ 15.834195] PREFETCH window: disabled. [ 15.838124] PCI: Bridge: 0000:00:0e.0 [ 15.841780] IO window: disabled. [ 15.845190] MEM window: disabled. [ 15.848684] PREFETCH window: disabled. [ 15.852612] PCI: Bridge: 0000:00:0f.0 [ 15.856278] IO window: disabled. [ 15.859686] MEM window: disabled. [ 15.863182] PREFETCH window: disabled. [ 15.867113] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 15.867120] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 15.867126] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 15.867132] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 15.867138] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 15.867143] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 15.867149] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 15.867188] NET: Registered protocol family 2 [ 15.909781] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 15.917225] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 15.926441] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 15.933576] TCP: Hash tables configured (established 262144 bind 65536) [ 15.940186] TCP reno registered [ 15.953752] checking if image is initramfs... it is [ 16.562213] Freeing initrd memory: 7303k freed [ 16.570369] audit: initializing netlink socket (disabled) [ 16.575771] audit(1189908949.184:1): initialized [ 16.580530] VFS: Disk quotas dquot_6.5.1 [ 16.584488] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 16.590957] io scheduler noop registered [ 16.594887] io scheduler anticipatory registered [ 16.599514] io scheduler deadline registered [ 16.603799] io scheduler cfq registered (default) [ 16.608759] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 16.608779] assign_interrupt_mode Found MSI capability [ 16.613911] Allocate Port Service[0000:00:0a.0:pcie00] [ 16.613974] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 16.613994] assign_interrupt_mode Found MSI capability [ 16.619118] Allocate Port Service[0000:00:0b.0:pcie00] [ 16.619179] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 16.619198] assign_interrupt_mode Found MSI capability [ 16.624324] Allocate Port Service[0000:00:0c.0:pcie00] [ 16.624381] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 16.624407] assign_interrupt_mode Found MSI capability [ 16.629532] Allocate Port Service[0000:00:0d.0:pcie00] [ 16.629587] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 16.629606] assign_interrupt_mode Found MSI capability [ 16.634731] Allocate Port Service[0000:00:0e.0:pcie00] [ 16.634786] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 16.634805] assign_interrupt_mode Found MSI capability [ 16.639930] Allocate Port Service[0000:00:0f.0:pcie00] [ 16.661977] Real Time Clock Driver v1.12ac [ 16.666137] Linux agpgart interface v0.102 (c) Dave Jones [ 16.671526] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 16.679362] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 16.685769] mice: PS/2 mouse device common for all mice [ 16.691467] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 16.699147] input: Macintosh mouse button emulation as /class/input/input0 [ 16.706034] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 16.712371] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 16.720596] PNP: No PS/2 controller found. Probing ports directly. [ 16.727033] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.732018] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 16.737153] TCP cubic registered [ 16.740395] NET: Registered protocol family 1 [ 16.744791] Magic number: 7:149:258 [ 16.748483] hash matches device ttyx0 [ 16.752406] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 16.758729] Freeing unused kernel memory: 304k freed [ 16.779001] input: AT Translated Set 2 keyboard as /class/input/input1 [ 16.915781] Capability LSM initialized [ 16.972178] thermal: Unknown symbol acpi_processor_set_thermal_limit [ 17.374492] SCSI subsystem initialized [ 17.383327] libata version 2.20 loaded. [ 17.398918] sata_nv 0000:00:05.0: version 3.3 [ 17.398945] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 17.399001] ata1: SATA max UDMA/133 cmd 0x0000000000012000 ctl 0x0000000000012072 bmdma 0x0000000000011cd0 irq 20 [ 17.409347] ata2: SATA max UDMA/133 cmd 0x0000000000012010 ctl 0x0000000000012082 bmdma 0x0000000000011cd8 irq 20 [ 17.422774] scsi0 : sata_nv [ 17.422777] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 17.437421] usbcore: registered new interface driver usbfs [ 17.442963] usbcore: registered new interface driver hub [ 17.448342] usbcore: registered new device driver usb [ 17.454162] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 17.746126] ata1: SATA link down (SStatus 0 SControl 300) [ 17.761815] ATA: abnormal status 0x7F on port 0x0000000000012007 [ 17.767888] scsi1 : sata_nv [ 18.085462] ata2: SATA link down (SStatus 0 SControl 300) [ 18.101142] ATA: abnormal status 0x7F on port 0x0000000000012017 [ 18.107243] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 18.107275] ata3: SATA max UDMA/133 cmd 0x0000000000012020 ctl 0x0000000000012092 bmdma 0x0000000000011ce0 irq 23 [ 18.117620] ata4: SATA max UDMA/133 cmd 0x0000000000012030 ctl 0x00000000000120a2 bmdma 0x0000000000011ce8 irq 23 [ 18.127944] scsi2 : sata_nv [ 18.444759] ata3: SATA link down (SStatus 0 SControl 300) [ 18.460442] ATA: abnormal status 0x7F on port 0x0000000000012027 [ 18.466476] scsi3 : sata_nv [ 18.784095] ata4: SATA link down (SStatus 0 SControl 300) [ 18.799788] ATA: abnormal status 0x7F on port 0x0000000000012037 [ 18.805865] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 18.805894] ata5: SATA max UDMA/133 cmd 0x0000000000012040 ctl 0x00000000000120b2 bmdma 0x0000000000011cf0 irq 21 [ 18.816254] ata6: SATA max UDMA/133 cmd 0x0000000000012050 ctl 0x00000000000120c2 bmdma 0x0000000000011cf8 irq 21 [ 18.826618] scsi4 : sata_nv [ 19.143393] ata5: SATA link down (SStatus 0 SControl 300) [ 19.159079] ATA: abnormal status 0x7F on port 0x0000000000012047 [ 19.165106] scsi5 : sata_nv [ 19.482729] ata6: SATA link down (SStatus 0 SControl 300) [ 19.498429] ATA: abnormal status 0x7F on port 0x0000000000012057 [ 19.504565] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 19.504570] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 19.510101] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 19.517583] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfc045000 [ 19.585594] usb usb1: configuration #1 chosen from 1 choice [ 19.591415] hub 1-0:1.0: USB hub found [ 19.595200] hub 1-0:1.0: 10 ports detected [ 19.707361] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 [ 19.713514] NFORCE-MCP55: chipset revision 161 [ 19.718006] NFORCE-MCP55: not 100% native mode: will probe irqs later [ 19.724488] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller [ 19.730728] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 19.730731] ide0: BM-DMA at 0x1cc0-0x1cc7, BIOS settings: hda:pio, hdb:pio [ 19.738057] Probing IDE interface ide0... [ 20.021679] usb 1-8: new low speed USB device using ohci_hcd and address 2 [ 20.028763] hda: ST340016A, ATA DISK drive [ 20.248304] usb 1-8: configuration #1 chosen from 1 choice [ 20.704580] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 20.709417] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 20.709422] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 20.714848] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 20.722338] ehci_hcd 0000:00:02.1: debug port 1 [ 20.726913] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 20.726921] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfc04a000 [ 20.732642] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 20.740225] usb 1-8: USB disconnect, address 2 [ 20.748108] usb usb2: configuration #1 chosen from 1 choice [ 20.753725] Losing some ticks... checking if CPU frequency changed. [ 20.753899] hub 2-0:1.0: USB hub found [ 20.757791] hub 2-0:1.0: 10 ports detected [ 20.869114] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 20.869123] forcedeth: using HIGHDMA [ 21.363049] usb 1-8: new low speed USB device using ohci_hcd and address 3 [ 21.395435] eth0: forcedeth.c: subsystem: 01022:2b80 bound to 0000:00:08.0 [ 21.413088] hda: max request size: 128KiB [ 21.423460] hda: Host Protected Area detected. [ 21.423463] current capacity is 78163247 sectors (40019 MB) [ 21.423464] native capacity is 78165360 sectors (40020 MB) [ 21.440214] hda: Host Protected Area disabled. [ 21.444685] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33) [ 21.452831] hda: cache flushes not supported [ 21.457171] hda: hda1 hda2 hda3 [ 21.594674] usb 1-8: configuration #1 chosen from 1 choice [ 21.602266] usbcore: registered new interface driver hiddev [ 21.613783] input: PS/2+USB Mouse as /class/input/input2 [ 21.619301] input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-8 [ 21.626561] usbcore: registered new interface driver usbhid [ 21.632193] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 21.706416] Attempting manual resume [ 21.711377] swsusp: Resume From Partition 3:2 [ 21.711379] PM: Checking swsusp image. [ 21.711667] PM: Resume from disk failed. [ 21.738511] kjournald starting. Commit interval 5 seconds [ 21.744082] EXT3-fs: mounted filesystem with ordered data mode. [ 30.692879] eth2: no link during initialization. [ 32.206573] Adding 1951888k swap on /dev/disk/by-uuid/c7601fc0-23eb-4c73-8ab6-9b407bb8b62a. Priority:-1 extents:1 across:1951888k [ 32.378363] EXT3 FS on hda3, internal journal [ 32.651616] kjournald starting. Commit interval 5 seconds [ 32.651838] EXT3 FS on hda1, internal journal [ 32.651843] EXT3-fs: mounted filesystem with ordered data mode.