LinuxBIOS-2.0.0_m57sli_Fallback lundi 10 septembre 2007, 19:14:19 (UTC+0200) starting... *sysinfo range: [000cf000,000cf730) bsp_apicid=00 core0 started: started ap apicid: 01 SBLink=00 NC node|link=00 begin msr fid, vid 31081212080c0202 end msr fid, vid 31081208080c020c mcp55_num:01 ht reset - LinuxBIOS-2.0.0_m57sli_Fallback lundi 10 septembre 2007, 19:14:19 (UTC+0200) starting... *sysinfo range: [000cf000,000cf730) bsp_apicid=00 core0 started: started ap apicid: 01 SBLink=00 NC node|link=00 begin msr fid, vid 31081208080c020c end msr fid, vid 31081208080c020c mcp55_num:01 Ram1.00 Ram2.00 Unbuffered 400Mhz Interleaved RAM: 0x00200000 KB Ram3 dimm_mask = 00000011 x4_mask = 00000000 x16_mask = 00000000 single_rank_mask = 00000000 ODC = 00113222 Addr Timing= 00202520 Initializing memory: done Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=18 done set DQS timing:DQSPos: 00 done set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=2d done Total DQS Training : tsc [00]=00000000324ec478 Total DQS Training : tsc [01]=0000000033a0712d Total DQS Training : tsc [02]=0000000082211e65 Total DQS Training : tsc [03]=00000000833e42f5 Ram4 v_esp=000cee78 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying LinuxBIOS to RAM. src=fffdf000 dst=00100000 linxbios_ram.nrv2b length = 0000d667 linxbios_ram.bin length = 000225d0 Jumping to LinuxBIOS. LinuxBIOS-2.0.0_m57sli_Fallback mardi 11 septembre 2007, 12:45:25 (UTC+0200) booting... Enumerating buses... APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 00:00.0 [10de/0369] enabled PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010 PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [10de/0369] enabled PCI: 00:01.0 [10de/0360] enabled PCI: 00:01.1 [10de/0368] enabled PCI: 00:01.2 [10de/036a] enabled PCI: 00:01.3 [10de/036b] enabled PCI: 00:02.0 [10de/036c] enabled PCI: 00:02.1 [10de/036d] enabled PCI: 00:04.0 [10de/036e] enabled PCI: 00:05.0 [10de/037f] enabled PCI: 00:05.1 [10de/037f] enabled PCI: 00:05.2 [10de/037f] enabled PCI: 00:06.0 [10de/0370] enabled PCI: 00:06.1 [10de/0371] enabled PCI: 00:08.0 [10de/0373] enabled PCI: 00:0a.0 [10de/0376] enabled PCI: 00:0b.0 [10de/0374] enabled PCI: 00:0c.0 [10de/0374] enabled PCI: 00:0d.0 [10de/0378] enabled PCI: 00:0e.0 [10de/0375] enabled PCI: 00:0f.0 [10de/0377] enabled PNP: 002e.0 disabled PNP: 002e.1 enabled PNP: 002e.2 disabled PNP: 002e.3 disabled PNP: 002e.4 enabled PNP: 002e.5 enabled PNP: 002e.6 enabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled PCI: pci_scan_bus for bus 01 PCI: pci_scan_bus returning with max=001 PCI: pci_scan_bus for bus 02 PCI: pci_scan_bus returning with max=002 PCI: pci_scan_bus for bus 03 PCI: pci_scan_bus returning with max=003 PCI: pci_scan_bus for bus 04 PCI: pci_scan_bus returning with max=004 PCI: pci_scan_bus for bus 05 PCI: pci_scan_bus returning with max=005 PCI: pci_scan_bus for bus 06 PCI: pci_scan_bus returning with max=006 PCI: pci_scan_bus for bus 07 PCI: 07:00.0 [1002/71c2] enabled PCI: 07:00.1 [1002/71e2] enabled PCI: pci_scan_bus returning with max=007 PCI: pci_scan_bus returning with max=007 PCI: pci_scan_bus returning with max=007 done Allocating resources... Reading resources... PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem Done reading resources. Allocating VGA resource PCI: 07:00.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0f.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f41fffff] mem PCI: 00:01.0 14 <- [0x00f4144000 - 0x00f4144fff] mem PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq PNP: 002e.4 60 <- [0x0000000290 - 0x0000000297] io PNP: 002e.4 62 <- [0x0000000230 - 0x0000000237] io PNP: 002e.4 70 <- [0x0000000009 - 0x0000000009] irq PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io PCI: 00:01.3 10 <- [0x00f4100000 - 0x00f413ffff] mem PCI: 00:02.0 10 <- [0x00f4145000 - 0x00f4145fff] mem PCI: 00:02.1 10 <- [0x00f414a000 - 0x00f414a0ff] mem PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io PCI: 00:05.0 24 <- [0x00f4146000 - 0x00f4146fff] mem PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io PCI: 00:05.1 24 <- [0x00f4147000 - 0x00f4147fff] mem PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io PCI: 00:05.2 24 <- [0x00f4148000 - 0x00f4148fff] mem PCI: 00:06.1 10 <- [0x00f4140000 - 0x00f4143fff] mem PCI: 00:08.0 10 <- [0x00f4149000 - 0x00f4149fff] mem PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io PCI: 00:08.0 18 <- [0x00f414b000 - 0x00f414b0ff] mem PCI: 00:08.0 1c <- [0x00f414c000 - 0x00f414c00f] mem PCI: 00:0f.0 1c <- [0x0000001000 - 0x0000001fff] bus 07 io PCI: 00:0f.0 24 <- [0x00e0000000 - 0x00efffffff] bus 07 prefmem PCI: 00:0f.0 20 <- [0x00f4000000 - 0x00f40fffff] bus 07 mem PCI: 07:00.0 10 <- [0x00e0000000 - 0x00efffffff] prefmem64 PCI: 07:00.0 18 <- [0x00f4020000 - 0x00f402ffff] mem64 PCI: 07:00.0 20 <- [0x0000001000 - 0x00000010ff] io PCI: 07:00.0 30 <- [0x00f4000000 - 0x00f401ffff] romem PCI: 07:00.1 10 <- [0x00f4030000 - 0x00f403ffff] mem64 PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem Done setting resources. Done allocating resources. Enabling resources... PCI: 00:18.0 cmd <- 140 PCI: 00:00.0 subsystem <- 1022/2b80 PCI: 00:00.0 cmd <- 146 PCI: 00:01.0 subsystem <- 1022/2b80 PCI: 00:01.0 cmd <- 14f mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff mcp55 lpc decode:PNP: 002e.4, base=0x00000290, end=0x00000297 mcp55 lpc decode:PNP: 002e.4, base=0x00000230, end=0x00000237 mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060 mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064 PCI: 00:01.1 subsystem <- 1022/2b80 PCI: 00:01.1 cmd <- 141 PCI: 00:01.2 cmd <- 540 PCI: 00:01.3 cmd <- 142 PCI: 00:02.0 subsystem <- 1022/2b80 PCI: 00:02.0 cmd <- 142 PCI: 00:02.1 subsystem <- 1022/2b80 PCI: 00:02.1 cmd <- 142 PCI: 00:04.0 subsystem <- 1022/2b80 PCI: 00:04.0 cmd <- 141 PCI: 00:05.0 subsystem <- 1022/2b80 PCI: 00:05.0 cmd <- 143 PCI: 00:05.1 subsystem <- 1022/2b80 PCI: 00:05.1 cmd <- 143 PCI: 00:05.2 subsystem <- 1022/2b80 PCI: 00:05.2 cmd <- 143 PCI: 00:06.0 bridge ctrl <- 0a03 PCI: 00:06.0 cmd <- 144 PCI: 00:06.1 subsystem <- 1022/2b80 PCI: 00:06.1 cmd <- 142 PCI: 00:08.0 subsystem <- 1022/2b80 PCI: 00:08.0 cmd <- 143 PCI: 00:0a.0 bridge ctrl <- 0003 PCI: 00:0a.0 cmd <- 140 PCI: 00:0b.0 bridge ctrl <- 0003 PCI: 00:0b.0 cmd <- 140 PCI: 00:0c.0 bridge ctrl <- 0003 PCI: 00:0c.0 cmd <- 140 PCI: 00:0d.0 bridge ctrl <- 0003 PCI: 00:0d.0 cmd <- 140 PCI: 00:0e.0 bridge ctrl <- 0003 PCI: 00:0e.0 cmd <- 140 PCI: 00:0f.0 bridge ctrl <- 000b PCI: 00:0f.0 cmd <- 147 PCI: 07:00.0 cmd <- 143 PCI: 07:00.1 cmd <- 142 PCI: 00:18.1 subsystem <- 1022/2b80 PCI: 00:18.1 cmd <- 140 PCI: 00:18.2 subsystem <- 1022/2b80 PCI: 00:18.2 cmd <- 140 PCI: 00:18.3 cmd <- 140 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init start_eip=0x00006000, offset=0x00110000, code_size=0x0000005b Initializing CPU #0 CPU: vendor AMD device 40fb2 CPU: family 0f, model 4b, stepping 02 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ Setting up local apic... apic_id: 0x00 done. ECC Disabled CPU #0 Initialized Initializing CPU #1 Waiting for 1 CPUS to stop CPU: vendor AMD device 40fb2 CPU: family 0f, model 4b, stepping 02 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ Setting up local apic... apic_id: 0x01 done. CPU #1 Initialized All AP CPUs stopped PCI: 00:18.0 init PCI: 00:01.0 init set power on after power fail RTC Init Invalid CMOS LB checksum PNP: 002e.1 init PNP: 002e.4 init FAN_CTL: reg = 0x02a9, read value = 0x50 FAN_CTL: reg = 0x02a9, writing value = 0xd7 PNP: 002e.5 init Keyboard selftest failed PNP: 002e.6 init PCI: 00:01.1 init PCI: 00:02.1 init PCI: 00:04.0 init IDE0 PCI: 00:05.0 init SATA S SATA P PCI: 00:05.1 init SATA S SATA P PCI: 00:05.2 init SATA S SATA P PCI: 00:06.0 init dev_root mem base = 0x00e0000000 [0x50] <-- 0xe0000000 PCI: 00:06.1 init base = f4140000 codec_mask = 01 codec viddid: 10ec0888 No verb! PCI: 00:08.0 init MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1 PCI: 00:0a.0 init PCI: 00:0b.0 init PCI: 00:0c.0 init PCI: 00:0d.0 init PCI: 00:0e.0 init PCI: 00:0f.0 init PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:01.2 init PCI: 00:01.3 init PCI: 07:00.0 init rom address for PCI: 07:00.0 = f4000000 copying VGA ROM Image from 0xf4000000 to 0xc0000, 0x10000 bytes entering emulator halt_sys: file /home/goldorak/src/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4387 PCI: 07:00.1 init Devices initialized Writing IRQ routing tables to 0xf0000...done. Wrote the mp table end at: 00000020 - 00000274 Moving GDT to 0x500...ok Adjust low_table_end from 0x00000530 to 0x00001000 Adjust rom_table_end from 0x000f0400 to 0x00100000 Wrote linuxbios table at: 00000530 - 00000de8 checksum 8b7b Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfffc0000 - 0xfffdefff Found ELF candidate at offset 0 header_offset is 0 Try to load at offset 0x0 New segment addr 0x100000 size 0x3cd20 offset 0xc0 filesize 0x12d08 (cleaned up) New segment addr 0x100000 size 0x3cd20 offset 0xc0 filesize 0x12d08 New segment addr 0x13cd20 size 0x48 offset 0x12de0 filesize 0x48 (cleaned up) New segment addr 0x13cd20 size 0x48 offset 0x12de0 filesize 0x48 Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x000000007ff80000 memsz: 0x000000000003cd20 filesz: 0x0000000000012d08 Clearing Segment: addr: 0x000000007ff92d08 memsz: 0x000000000002a018 Loading Segment: addr: 0x000000007ffbcd20 memsz: 0x0000000000000048 filesz: 0x0000000000000048 Jumping to boot code at 0x10e4fc FILO version 0.5 (goldorak@vega) Mon Jul 30 12:17:14 CEST 2007 menu: hda3:/boot/filo/menu.lst hda: LBA 40GB: ST340016A Mounted ext2fs Mounted ext2fs Found Linux version 2.6.20-15-generic (root@yellow) #2 SMP Sun Apr 15 06:17:24 UTC 2007 bzImage. Loading kernel... ok Loading initrd... ok Jumping to entry point... [ 0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] Command line: acpi=off pci=noacpi,nobios console=tty0 console=ttyS0,115200 root=/dev/hda1 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] PCI: Unknown option `nobios' [ 0.000000] end_pfn_map = 524288 [ 0.000000] DMI not present or invalid. [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000080000000 [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 1 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 1 -> 160 [ 0.000000] 0: 192 -> 240 [ 0.000000] 0: 256 -> 524288 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: GIGABYTE MPTABLE: Product ID: M57SLI MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #2 at 0xF4144000. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Processors: 2 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000c0000 [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:80000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515988 [ 0.000000] Kernel command line: acpi=off pci=noacpi,nobios console=tty0 console=ttyS0,115200 root=/dev/hda1 ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 14.894819] Console: colour VGA+ 80x25 [ 15.113665] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 15.122054] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 15.129573] Checking aperture... [ 15.132845] CPU 0: aperture @ f0000000 size 64 MB [ 15.153081] Memory: 2053392k/2097152k available (2217k kernel code, 43564k reserved, 1162k data, 304k init) [ 15.239298] Calibrating delay using timer specific routine.. 4007.23 BogoMIPS (lpj=8014472) [ 15.247786] Security Framework v1.0.0 initialized [ 15.252531] SELinux: Disabled at boot. [ 15.256425] Mount-cache hash table entries: 256 [ 15.261113] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 15.268272] CPU: L2 Cache: 512K (64 bytes/line) [ 15.272837] CPU 0/0 -> Node 0 [ 15.275848] CPU: Physical Processor ID: 0 [ 15.279895] CPU: Processor Core ID: 0 [ 15.283616] SMP alternatives: switching to UP code [ 15.288656] Early unpacking initramfs... done [ 15.654009] Using local APIC timer interrupts. [ 15.708385] result 12500067 [ 15.711211] Detected 12.500 MHz APIC timer. [ 15.718588] SMP alternatives: switching to SMP code [ 15.723595] Booting processor 1/2 APIC 0x1 [ 15.737985] Initializing CPU#1 [ 15.818192] Calibrating delay using timer specific routine.. 4000.37 BogoMIPS (lpj=8000749) [ 15.818199] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 15.818201] CPU: L2 Cache: 512K (64 bytes/line) [ 15.818203] CPU 1/1 -> Node 0 [ 15.818205] CPU: Physical Processor ID: 0 [ 15.818206] CPU: Processor Core ID: 1 [ 15.818283] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 15.822187] CPU 1: Syncing TSC to CPU 0. [ 15.822283] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 522 cycles) [ 15.822293] Brought up 2 CPUs [ 15.877636] time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer. [ 15.883931] time.c: Detected 2000.008 MHz processor. [ 16.528941] migration_cost=162 [ 16.532453] Time: 7:33:56 Date: 08/18/107 [ 16.536713] NET: Registered protocol family 16 [ 16.541549] PCI: Using configuration type 1 [ 16.546293] ACPI: Interpreter disabled. [ 16.550172] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.555868] pnp: PnP ACPI: disabled [ 16.559442] PCI: Probing PCI hardware [ 16.565011] PCI: Using IRQ router default [10de/0370] at 0000:00:06.0 [ 16.571507] PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10 [ 16.577380] PCI->APIC IRQ transform: 0000:00:01.3[B] -> IRQ 10 [ 16.583246] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 22 [ 16.589109] PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 23 [ 16.594975] PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 20 [ 16.600838] PCI->APIC IRQ transform: 0000:00:05.1[B] -> IRQ 23 [ 16.606703] PCI->APIC IRQ transform: 0000:00:05.2[C] -> IRQ 21 [ 16.612566] PCI->APIC IRQ transform: 0000:00:06.1[B] -> IRQ 23 [ 16.618422] PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22 [ 16.624282] PCI->APIC IRQ transform: 0000:07:00.0[A] -> IRQ 17 [ 16.630208] NET: Registered protocol family 8 [ 16.634597] NET: Registered protocol family 20 [ 16.639446] PCI: Bridge: 0000:00:06.0 [ 16.643145] IO window: disabled. [ 16.646592] MEM window: disabled. [ 16.650114] PREFETCH window: disabled. [ 16.654069] PCI: Bridge: 0000:00:0a.0 [ 16.657770] IO window: disabled. [ 16.661212] MEM window: disabled. [ 16.664731] PREFETCH window: disabled. [ 16.668685] PCI: Bridge: 0000:00:0b.0 [ 16.672370] IO window: disabled. [ 16.675805] MEM window: disabled. [ 16.679334] PREFETCH window: disabled. [ 16.683287] PCI: Bridge: 0000:00:0c.0 [ 16.686978] IO window: disabled. [ 16.690413] MEM window: disabled. [ 16.693934] PREFETCH window: disabled. [ 16.697890] PCI: Bridge: 0000:00:0d.0 [ 16.701588] IO window: disabled. [ 16.705024] MEM window: disabled. [ 16.708543] PREFETCH window: disabled. [ 16.712497] PCI: Bridge: 0000:00:0e.0 [ 16.716189] IO window: disabled. [ 16.719625] MEM window: disabled. [ 16.723154] PREFETCH window: disabled. [ 16.727106] PCI: Bridge: 0000:00:0f.0 [ 16.730800] IO window: 1000-1fff [ 16.734234] MEM window: f4000000-f40fffff [ 16.738447] PREFETCH window: e0000000-efffffff [ 16.743180] NET: Registered protocol family 2 [ 16.784375] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 16.791851] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 16.801105] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 16.808276] TCP: Hash tables configured (established 262144 bind 65536) [ 16.814922] TCP reno registered [ 16.828347] checking if image is initramfs... it is [ 17.436378] Freeing initrd memory: 7303k freed [ 17.444561] audit: initializing netlink socket (disabled) [ 17.449996] audit(1190100836.192:1): initialized [ 17.454781] VFS: Disk quotas dquot_6.5.1 [ 17.458748] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 17.465269] io scheduler noop registered [ 17.469845] io scheduler anticipatory registered [ 17.474538] io scheduler deadline registered [ 17.478891] io scheduler cfq registered (default) [ 17.483984] assign_interrupt_mode Found MSI capability [ 17.489224] assign_interrupt_mode Found MSI capability [ 17.494464] assign_interrupt_mode Found MSI capability [ 17.499698] assign_interrupt_mode Found MSI capability [ 17.504932] assign_interrupt_mode Found MSI capability [ 17.510166] assign_interrupt_mode Found MSI capability [ 17.537225] Real Time Clock Driver v1.12ac [ 17.541423] Linux agpgart interface v0.102 (c) Dave Jones [ 17.546844] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.554716] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.561149] mice: PS/2 mouse device common for all mice [ 17.566909] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.574629] input: Macintosh mouse button emulation as /class/input/input0 [ 17.581552] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 17.587923] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 17.596182] PNP: No PS/2 controller found. Probing ports directly. [ 17.602653] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.607661] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.612828] TCP cubic registered [ 17.616103] NET: Registered protocol family 1 [ 17.620531] Magic number: 7:141:572 [ 17.624291] hash matches device ptyb4 [ 17.628211] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 17.634574] Freeing unused kernel memory: 304k freed Loading, please wait... [ 17.657708] input: AT Translated Set 2 keyboard as /class/input/input1 Begin: Loading essential drivers... ... [ 17.787836] Capability LSM initialized Done. Begin: Running /scripts/init-premount ... [ 17.854745] thermal: Unknown symbol acpi_processor_set_thermal_limit Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Done. Begin: Waiting for root file system... ... [ 18.265139] SCSI subsystem initialized [ 18.285688] ata1: SATA max UDMA/133 cmd 0x0000000000013000 ctl 0x0000000000013072 bmdma 0x0000000000012cd0 irq 20 [ 18.296126] ata2: SATA max UDMA/133 cmd 0x0000000000013010 ctl 0x0000000000013082 bmdma 0x0000000000012cd8 irq 20 [ 18.306495] scsi0 : sata_nv [ 18.309374] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 18.333571] usbcore: registered new interface driver usbfs [ 18.339184] usbcore: registered new interface driver hub [ 18.344603] usbcore: registered new device driver usb [ 18.620719] ata1: SATA link down (SStatus 0 SControl 300) [ 18.636473] ATA: abnormal status 0x7F on port 0x0000000000013007 [ 18.642556] scsi1 : sata_nv [ 18.960055] ata2: SATA link down (SStatus 0 SControl 300) [ 18.975783] ATA: abnormal status 0x7F on port 0x0000000000013017 [ 18.981957] ata3: SATA max UDMA/133 cmd 0x0000000000013020 ctl 0x0000000000013092 bmdma 0x0000000000012ce0 irq 23 [ 18.992347] ata4: SATA max UDMA/133 cmd 0x0000000000013030 ctl 0x00000000000130a2 bmdma 0x0000000000012ce8 irq 23 [ 19.002718] scsi2 : sata_nv [ 19.319348] ata3: SATA link down (SStatus 0 SControl 300) [ 19.335123] ATA: abnormal status 0x7F on port 0x0000000000013027 [ 19.341213] scsi3 : sata_nv [ 19.658684] ata4: SATA link down (SStatus 0 SControl 300) [ 19.674468] ATA: abnormal status 0x7F on port 0x0000000000013037 [ 19.680638] ata5: SATA max UDMA/133 cmd 0x0000000000013040 ctl 0x00000000000130b2 bmdma 0x0000000000012cf0 irq 21 [ 19.691075] ata6: SATA max UDMA/133 cmd 0x0000000000013050 ctl 0x00000000000130c2 bmdma 0x0000000000012cf8 irq 21 [ 19.701443] scsi4 : sata_nv [ 20.017981] ata5: SATA link down (SStatus 0 SControl 300) [ 20.033744] ATA: abnormal status 0x7F on port 0x0000000000013047 [ 20.039853] scsi5 : sata_nv [ 20.357317] ata6: SATA link down (SStatus 0 SControl 300) [ 20.373075] ATA: abnormal status 0x7F on port 0x0000000000013057 [ 20.379209] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 20.384638] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 20.392140] ohci_hcd 0000:00:02.0: irq 22, io mem 0xf4145000 [ 20.459229] usb usb1: configuration #1 chosen from 1 choice [ 20.464913] hub 1-0:1.0: USB hub found [ 20.468729] hub 1-0:1.0: 10 ports detected [ 20.577885] forcedeth: using HIGHDMA [ 20.880295] usb 1-8: new low speed USB device using ohci_hcd and address 2 [ 21.090961] usb 1-8: configuration #1 chosen from 1 choice [ 21.106617] eth0: forcedeth.c: subsystem: 01022:2b80 bound to 0000:00:08.0 [ 21.113641] usbcore: registered new interface driver hiddev [ 21.119381] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 [ 21.124927] input: PS/2+USB Mouse as /class/input/input2 [ 21.124945] input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-8 [ 21.124958] usbcore: registered new interface driver usbhid [ 21.124961] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 21.150047] NFORCE-MCP55: chipset revision 161 [ 21.154545] NFORCE-MCP55: not 100% native mode: will probe irqs later [ 21.161070] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller [ 21.167324] ide0: BM-DMA at 0x2cc0-0x2cc7, BIOS settings: hda:pio, hdb:pio [ 21.463330] hda: ST340016A, ATA DISK drive [ 22.142016] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 22.146930] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 22.152413] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 22.159932] ehci_hcd 0000:00:02.1: debug port 1 [ 22.164559] ehci_hcd 0000:00:02.1: irq 23, io mem 0xf414a000 [ 22.170298] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 22.177900] usb 1-8: USB disconnect, address 2 [ 22.184259] usb usb2: configuration #1 chosen from 1 choice [ 22.191436] hub 2-0:1.0: USB hub found [ 22.195283] hub 2-0:1.0: 10 ports detected [ 22.318744] hda: max request size: 128KiB [ 22.323180] hda: Host Protected Area detected. [ 22.323182] current capacity is 78163247 sectors (40019 MB) [ 22.323183] native capacity is 78165360 sectors (40020 MB) [ 22.339592] hda: Host Protected Area disabled. [ 22.344119] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33) [ 22.352428] hda: cache flushes not supported [ 22.356784] hda: hda1 hda2 hda3 Done.