Initial AMD Serengeti_Cheetah_FAM10 platform for and Barcelona support.

Signed-off-by: Marc Jones <marc.jones@amd.com>
Reviewed-by: Jordan Crouse <jordan.crouse@amd.com>

Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb	2007-12-12 16:21:20.000000000 -0700
@@ -0,0 +1,424 @@
+#
+# This file is part of the LinuxBIOS project.
+#
+# Copyright (C) 2007 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FAILOVER_IMAGE
+	default ROM_SECTION_SIZE   = FAILOVER_SIZE
+	default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE )
+else
+    if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE   = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
+    else
+	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
+	default ROM_SECTION_OFFSET = 0
+    end
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE		 = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+#
+if USE_FAILOVER_IMAGE
+	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
+else
+    if USE_FALLBACK_IMAGE
+	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
+    else
+	default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
+    end
+end
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+
+#needed by irq_tables and mptable and acpi_tables
+object get_bus_conf.o
+
+if HAVE_MP_TABLE
+	object mptable.o
+end
+
+if HAVE_PIRQ_TABLE
+	object irq_tables.o
+end
+
+if HAVE_ACPI_TABLES
+	 object acpi_tables.o
+	 object fadt.o
+	makerule dsdt.c
+		depends "$(MAINBOARD)/dx/dsdt_lb.dsl"
+		action	"iasl -tc $(MAINBOARD)/dx/dsdt_lb.dsl"
+		action	"mv dsdt_lb.hex dsdt.c"
+	end
+	 object ./dsdt.o
+
+	#./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
+
+	if ACPI_SSDTX_NUM
+	makerule ssdt2.c
+		depends "$(MAINBOARD)/dx/pci2.asl"
+		action	"iasl -tc $(MAINBOARD)/dx/pci2.asl"
+		action	"perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
+		action	"mv pci2.hex ssdt2.c"
+	end
+	object ./ssdt2.o
+	makerule ssdt3.c
+		depends "$(MAINBOARD)/dx/pci3.asl"
+		action	"iasl -tc $(MAINBOARD)/dx/pci3.asl"
+		action	"perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex"
+		action	"mv pci3.hex ssdt3.c"
+	end
+	object ./ssdt3.o
+	makerule ssdt4.c
+		depends "$(MAINBOARD)/dx/pci4.asl"
+		action	"iasl -tc $(MAINBOARD)/dx/pci4.asl"
+		action	"perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex"
+		action	"mv pci4.hex ssdt4.c"
+	end
+	object ./ssdt4.o
+	makerule ssdt5.c
+		depends "$(MAINBOARD)/dx/pci5.asl"
+		action	"iasl -tc $(MAINBOARD)/dx/pci5.asl"
+		action	"perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex"
+		action	"mv pci5.hex ssdt5.c"
+	end
+	object ./ssdt5.o
+	 end
+end
+
+if USE_DCACHE_RAM
+	makedefine CACHE_AS_RAM_AUTO_C:=cache_as_ram_auto.c
+
+	if CONFIG_USE_INIT
+		# compile cache_as_ram.c to auto.o
+		makerule ./cache_as_ram_auto.o
+			depends "$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) option_table.h"
+			action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+		end
+
+	else
+		#compile cache_as_ram.c to auto.inc
+		makerule ./cache_as_ram_auto.inc
+			depends "$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) option_table.h"
+			action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+			action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+			action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+		end
+
+	end
+end
+
+if USE_FAILOVER_IMAGE
+else
+    if CONFIG_AP_CODE_IN_CAR
+	 makerule ./apc_auto.o
+		 depends "$(MAINBOARD)/apc_auto.c option_table.h"
+		 action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+	 end
+	 ldscript /arch/i386/init/ldscript_apc.lb
+    end
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+
+if HAVE_FAILOVER_BOOT
+    if USE_FAILOVER_IMAGE
+	mainboardinit cpu/x86/16bit/entry16.inc
+	ldscript /cpu/x86/16bit/entry16.lds
+    end
+else
+    if USE_FALLBACK_IMAGE
+	mainboardinit cpu/x86/16bit/entry16.inc
+	ldscript /cpu/x86/16bit/entry16.lds
+    end
+end
+
+mainboardinit cpu/x86/32bit/entry32.inc
+if USE_DCACHE_RAM
+	 if CONFIG_USE_INIT
+		 ldscript /cpu/x86/32bit/entry32.lds
+	 end
+
+	 if CONFIG_USE_INIT
+		 ldscript /cpu/amd/car/cache_as_ram.lds
+	 end
+end
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if HAVE_FAILOVER_BOOT
+    if USE_FAILOVER_IMAGE
+	mainboardinit cpu/x86/16bit/reset16.inc
+	ldscript /cpu/x86/16bit/reset16.lds
+    else
+	mainboardinit cpu/x86/32bit/reset32.inc
+	ldscript /cpu/x86/32bit/reset32.lds
+    end
+else
+    if USE_FALLBACK_IMAGE
+	mainboardinit cpu/x86/16bit/reset16.inc
+	ldscript /cpu/x86/16bit/reset16.lds
+    else
+	mainboardinit cpu/x86/32bit/reset32.inc
+	ldscript /cpu/x86/32bit/reset32.lds
+    end
+end
+
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+if USE_DCACHE_RAM
+	##
+	## Setup Cache-As-Ram
+	##
+	mainboardinit cpu/amd/car/cache_as_ram.inc
+end
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if HAVE_FAILOVER_BOOT
+    if USE_FAILOVER_IMAGE
+	if USE_DCACHE_RAM
+		ldscript /arch/i386/lib/failover_failover.lds
+	end
+    end
+else
+    if USE_FALLBACK_IMAGE
+	if USE_DCACHE_RAM
+		ldscript /arch/i386/lib/failover.lds
+	end
+    end
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+if USE_DCACHE_RAM
+
+	if CONFIG_USE_INIT
+		initobject cache_as_ram_auto.o
+	else
+		mainboardinit ./cache_as_ram_auto.inc
+	end
+
+end
+
+##
+## Include the secondary Configuration files
+##
+if CONFIG_CHIP_NAME
+	config chip.h
+end
+
+dir /southbridge/amd/amd8151
+
+# sample config for amd/serengeti_cheetah_fam10
+chip northbridge/amd/amdfam10/root_complex
+	device apic_cluster 0 on
+		chip cpu/amd/socket_F_1207  #L1 and DDR2
+			 device apic 0 on end
+		end
+	end
+	device pci_domain 0 on
+		chip northbridge/amd/amdfam10
+			device pci 18.0 on #  northbridge
+				#  devices on link 0, link 0 == LDT 0
+				chip southbridge/amd/amd8132
+					# the on/off keyword is mandatory
+					device pci 0.0 on end
+					device pci 0.1 on end
+					device pci 1.0 on end
+					device pci 1.1 on end
+				end
+				chip southbridge/amd/amd8111
+					# this "device pci 0.0" is the parent the next one
+					# PCI bridge
+					device pci 0.0 on
+						device pci 0.0 on end
+						device pci 0.1 on end
+						device pci 0.2 off end
+						device pci 1.0 off end
+					end
+					device pci 1.0 on
+						chip superio/winbond/w83627hf
+							device pnp 2e.0 off #  Floppy
+								io 0x60 = 0x3f0
+								irq 0x70 = 6
+								drq 0x74 = 2
+							end
+							device pnp 2e.1 off #  Parallel Port
+								io 0x60 = 0x378
+								irq 0x70 = 7
+							end
+							device pnp 2e.2 on #  Com1
+								io 0x60 = 0x3f8
+								irq 0x70 = 4
+							end
+							device pnp 2e.3 off #  Com2
+								io 0x60 = 0x2f8
+								irq 0x70 = 3
+							end
+							device pnp 2e.5 on #  Keyboard
+								io 0x60 = 0x60
+								io 0x62 = 0x64
+								irq 0x70 = 1
+								irq 0x72 = 12
+							end
+							device pnp 2e.6 off #  CIR
+								io 0x60 = 0x100
+							end
+							device pnp 2e.7 off #  GAME_MIDI_GIPO1
+								io 0x60 = 0x220
+								io 0x62 = 0x300
+								irq 0x70 = 9
+							end
+							device pnp 2e.8 off end #  GPIO2
+							device pnp 2e.9 off end #  GPIO3
+							device pnp 2e.a off end #  ACPI
+							device pnp 2e.b on #  HW Monitor
+								io 0x60 = 0x290
+								irq 0x70 = 5
+							end
+						end
+					end
+					device pci 1.1 on end
+					device pci 1.2 on end
+					device pci 1.3 on
+						chip drivers/i2c/i2cmux2 # pca9556 smbus mux
+						chip drivers/i2c/i2cmux2 # pca9556 smbus mux
+							device i2c 18 on #0 pca9516 1
+								chip drivers/generic/generic #dimm 0-0-0
+									device i2c 50 on end
+								end
+								chip drivers/generic/generic #dimm 0-0-1
+									device i2c 51 on end
+								end
+								chip drivers/generic/generic #dimm 0-1-0
+									device i2c 52 on end
+								end
+								chip drivers/generic/generic #dimm 0-1-1
+									device i2c 53 on end
+								end
+							end
+							device i2c 18 on #1 pca9516 2
+								chip drivers/generic/generic #dimm 1-0-0
+									device i2c 50 on end
+								end
+								chip drivers/generic/generic #dimm 1-0-1
+									device i2c 51 on end
+								end
+								chip drivers/generic/generic #dimm 1-1-0
+									device i2c 52 on end
+								end
+								chip drivers/generic/generic #dimm 1-1-1
+									device i2c 53 on end
+								end
+							end
+						end
+						end
+					end # acpi
+					device pci 1.5 off end
+					device pci 1.6 off end
+					register "ide0_enable" = "1"
+					register "ide1_enable" = "1"
+				end
+			end #  device pci 18.0
+
+			device pci 18.0 on end
+			device pci 18.0 on end
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+			device pci 18.4 on end
+#			device pci 00.5 on end
+		end
+	end #pci_domain
+	#for node 32 to node 63
+#	device pci_domain 0 on
+#		chip northbridge/amd/amdfam10
+#			  device pci 00.0 on end#  northbridge
+#			  device pci 00.0 on end
+#			  device pci 00.0 on end
+#			  device pci 00.0 on end
+#			  device pci 00.1 on end
+#			  device pci 00.2 on end
+#			  device pci 00.3 on end
+#			  device pci 00.4 on end
+#			 device pci 00.5 on end
+#		end
+#	end #pci_domain
+
+#	  chip drivers/generic/debug
+#		 device pnp 0.0 off end # chip name
+#		  device pnp 0.1 on end # pci_regs_all
+#		  device pnp 0.2 off end # mem
+#		  device pnp 0.3 off end # cpuid
+#		  device pnp 0.4 off end # smbus_regs_all
+#		  device pnp 0.5 off end # dual core msr
+#		  device pnp 0.6 off end # cache size
+#		  device pnp 0.7 off end # tsc
+#		  device pnp 0.8 off end # hard reset
+#		  device pnp 0.9 off end # mcp55
+#		  device pnp 0.a on end # GH ext table
+#	 end
+
+end
+
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb	2007-12-12 16:20:51.000000000 -0700
@@ -0,0 +1,357 @@
+#
+# This file is part of the LinuxBIOS project.
+#
+# Copyright (C) 2007 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses HAVE_ACPI_TABLES
+uses ACPI_SSDTX_NUM
+uses USE_FALLBACK_IMAGE
+uses USE_FAILOVER_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_FAILOVER_BOOT
+uses HAVE_HARD_RESET
+uses IRQ_SLOT_COUNT
+uses HAVE_OPTION_TABLE
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses FALLBACK_SIZE
+uses FAILOVER_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_ROM_PAYLOAD_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses USE_OPTION_TABLE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses LINUXBIOS_EXTRA_VERSION
+uses _RAMBASE
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CONFIG_GDB_STUB
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses CONFIG_CHIP_NAME
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZE_AUTO_INC
+
+uses HT_CHAIN_UNITID_BASE
+uses HT_CHAIN_END_UNITID_BASE
+uses SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+
+uses USE_DCACHE_RAM
+uses DCACHE_RAM_BASE
+uses DCACHE_RAM_SIZE
+uses DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_USE_INIT
+
+uses SERIAL_CPU_INIT
+
+uses ENABLE_APIC_EXT_ID
+uses APIC_ID_OFFSET
+uses LIFT_BSP_APIC_ID
+
+uses CONFIG_PCI_64BIT_PREF_MEM
+
+uses CONFIG_LB_MEM_TOPK
+
+uses PCI_BUS_SEGN_BITS
+
+uses CONFIG_AP_CODE_IN_CAR
+
+uses MEM_TRAIN_SEQ
+
+uses WAIT_BEFORE_CPUS_INIT
+
+uses CONFIG_AMDMCT
+
+uses CONFIG_USE_PRINTK_IN_CAR
+uses CAR_FAM10
+
+###
+### Build options
+###
+
+##
+## ROM_SIZE is the size of boot ROM that this board will use.
+##
+default ROM_SIZE=524288
+
+##
+##
+#FALLBACK_SIZE_SIZE is the amount of the ROM the complete fallback image will use
+##
+#default FALLBACK_SIZE=131072
+#default FALLBACK_SIZE=0x40000
+
+#FALLBACK: 512K - 4K
+default FALLBACK_SIZE=0x7f000
+#FAILOVER: 4k
+default FAILOVER_SIZE=0x01000
+
+#more 1M for pgtbl
+#if there is RAM on node0, we need to set it to 32M, otherwise can not access CAR on node0, and RAM on node1 at same time.
+default CONFIG_LB_MEM_TOPK=16384
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+default HAVE_FAILOVER_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=11
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=1
+
+## ACPI tables will be included
+default HAVE_ACPI_TABLES=1
+## extra SSDT num
+default ACPI_SSDTX_NUM=31
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=1
+
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_PHYSICAL_CPUS=2
+default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS
+default CONFIG_LOGICAL_CPUS=1
+
+#default SERIAL_CPU_INIT=0
+
+default ENABLE_APIC_EXT_ID=1
+default APIC_ID_OFFSET=0x00
+default LIFT_BSP_APIC_ID=1
+
+#CHIP_NAME ?
+default CONFIG_CHIP_NAME=1
+
+#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
+#2G
+#default HW_MEM_HOLE_SIZEK=0x200000
+#1G
+default HW_MEM_HOLE_SIZEK=0x100000
+#512M
+#default HW_MEM_HOLE_SIZEK=0x80000
+
+#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
+#default HW_MEM_HOLE_SIZE_AUTO_INC=1
+
+#VGA Console
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+
+#HT Unit ID offset, default is 1, the typical one
+default HT_CHAIN_UNITID_BASE=0xa
+
+#real SB Unit ID, default is 0x20, mean dont touch it at last
+default HT_CHAIN_END_UNITID_BASE=0x6
+
+#make the SB HT chain on bus 0, default is not (0)
+default SB_HT_CHAIN_ON_BUS0=2
+
+#only offset for SB chain?, default is yes(1)
+#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+
+#allow capable device use that above 4G
+#default CONFIG_PCI_64BIT_PREF_MEM=1
+
+#it only be 0, 1, 2, 3, 4 and default is 0
+#default PCI_BUS_SEGN_BITS=3
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default USE_DCACHE_RAM=1
+default DCACHE_RAM_BASE=0xc4000
+default DCACHE_RAM_SIZE=0x0c000
+#default DCACHE_RAM_GLOBAL_VAR_SIZE=0x08000
+default DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000
+default CONFIG_USE_INIT=0
+
+#default CONFIG_AP_CODE_IN_CAR=1
+default MEM_TRAIN_SEQ=2
+default WAIT_BEFORE_CPUS_INIT=0
+
+default CONFIG_AMDMCT = 1
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default MAINBOARD_PART_NUMBER="Cheetah Fam10"
+default MAINBOARD_VENDOR="AMD"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
+default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 768k heap
+##
+default HEAP_SIZE=0xc0000
+
+##
+## Only use the option table in a normal image
+##
+default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
+
+##
+## LinuxBIOS C code runs at this location in RAM
+##
+default _RAMBASE=0x00200000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_PAYLOAD = 1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+##
+## The Serial Console
+##
+
+default CONFIG_USE_PRINTK_IN_CAR=1
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG      1   system is unusable
+## ALERT      2   action must be taken immediately
+## CRIT       3   critical conditions
+## ERR        4   error conditions
+## WARNING    5   warning conditions
+## NOTICE     6   normal but significant condition
+## INFO       7   informational
+## DEBUG      8   debug-level messages
+## SPEW       9   Way too many details
+
+## Request this level of debugging output
+default  DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default  MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+### End Options.lb
+end
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,370 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include "mb_sysconf.h"
+
+#define DUMP_ACPI_TABLES 0
+
+#if DUMP_ACPI_TABLES == 1
+static void dump_mem(u32 start, u32 end)
+{
+
+	u32 i;
+	print_debug("dump_mem:");
+	for(i=start;i<end;i++) {
+		if((i & 0xf)==0) {
+			printk_debug("\n%08x:", i);
+		}
+		printk_debug(" %02x", (unsigned char)*((unsigned char *)i));
+	}
+	print_debug("\n");
+ }
+#endif
+
+extern u8 AmlCode[];
+extern u8 AmlCode_ssdt[];
+
+#if ACPI_SSDTX_NUM >= 1
+extern u8 AmlCode_ssdt2[];
+extern u8 AmlCode_ssdt3[];
+extern u8 AmlCode_ssdt4[];
+extern u8 AmlCode_ssdt5[];
+#endif
+
+#define IO_APIC_ADDR	0xfec00000UL
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+	/* Just a dummy */
+	return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+	u32 gsi_base=0x18;
+
+	struct mb_sysconf_t *m;
+
+	m = sysconf.mb;
+
+	/* create all subtables for processors */
+	current = acpi_create_madt_lapics(current);
+
+	/* Write 8111 IOAPIC */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8111,
+			IO_APIC_ADDR, 0);
+
+	/* Write all 8131 IOAPICs */
+	{
+		device_t dev;
+		struct resource *res;
+		dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1));
+		if (dev) {
+			res = find_resource(dev, PCI_BASE_ADDRESS_0);
+			if (res) {
+				current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_1,
+					res->base, gsi_base );
+				gsi_base+=7;
+
+			}
+		}
+		dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1));
+		if (dev) {
+			res = find_resource(dev, PCI_BASE_ADDRESS_0);
+			if (res) {
+				current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_2,
+					res->base, gsi_base );
+				gsi_base+=7;
+			}
+		}
+
+		int i;
+		int j = 0;
+
+		for(i=1; i< sysconf.hc_possible_num; i++) {
+			u32 d = 0;
+
+			if(!(sysconf.pci1234[i] & 0x1) ) continue;
+			// 8131 need to use +4
+			switch (sysconf.hcid[i]) {
+			case 1:
+				d = 7;
+				break;
+			case 3:
+				d = 4;
+				break;
+			}
+			switch (sysconf.hcid[i]) {
+			case 1:
+			case 3:
+				dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1));
+				if (dev) {
+					res = find_resource(dev, PCI_BASE_ADDRESS_0);
+					if (res) {
+						current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][0],
+							res->base, gsi_base );
+						gsi_base+=d;
+					}
+				}
+				dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1));
+				if (dev) {
+					res = find_resource(dev, PCI_BASE_ADDRESS_0);
+					if (res) {
+						current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][1],
+							res->base, gsi_base );
+						gsi_base+=d;
+
+					}
+				}
+				break;
+			}
+			j++;
+		}
+	}
+
+	current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) current, 0, 0, 2, 5 );
+		/* 0: mean bus 0--->ISA */
+		/* 0: PIC 0 */
+		/* 2: APIC 2 */
+		/* 5 mean: 0101 --> Edige-triggered, Active high*/
+
+
+		/* create all subtables for processors */
+	current = acpi_create_madt_lapic_nmis(current, 5, 1);
+		/* 1: LINT1 connect to NMI */
+
+	return current;
+}
+
+extern void get_bus_conf(void);
+extern void update_ssdt(void *ssdt);
+
+
+void update_ssdtx(void *ssdtx, int i)
+{
+	u8 *PCI;
+	u8 *HCIN;
+	u8 *UID;
+
+	PCI = ssdtx + 0x32;
+	HCIN = ssdtx + 0x39;
+	UID = ssdtx + 0x40;
+
+	if(i<7) {
+		*PCI  = (u8) ('4' + i - 1);
+	}
+	else {
+		*PCI  = (u8) ('A' + i - 1 - 6);
+	}
+	*HCIN = (u8) i;
+	*UID  = (u8) (i+3);
+
+	/* FIXME: need to update the GSI id in the ssdtx too */
+
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+	unsigned long current;
+	acpi_rsdp_t *rsdp;
+	acpi_rsdt_t *rsdt;
+	acpi_hpet_t *hpet;
+	acpi_madt_t *madt;
+	acpi_srat_t *srat;
+	acpi_slit_t *slit;
+	acpi_fadt_t *fadt;
+	acpi_facs_t *facs;
+	acpi_header_t *dsdt;
+	acpi_header_t *ssdt;
+	acpi_header_t *ssdtx;
+	u8 *p;
+
+	int i;
+
+	get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn
+
+	/* Align ACPI tables to 16 bytes */
+	start	= ( start + 0x0f) & -0x10;
+	current = start;
+
+	printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
+
+	/* We need at least an RSDP and an RSDT Table */
+	rsdp = (acpi_rsdp_t *) current;
+	current += sizeof(acpi_rsdp_t);
+	rsdt = (acpi_rsdt_t *) current;
+	current += sizeof(acpi_rsdt_t);
+
+	/* clear all table memory */
+	memset((void *)start, 0, current - start);
+
+	acpi_write_rsdp(rsdp, rsdt);
+	acpi_write_rsdt(rsdt);
+
+	/*
+	 * We explicitly add these tables later on:
+	 */
+	current	  = ( current + 0x07) & -0x08;
+	printk_debug("ACPI:    * HPET at %lx\n", current);
+	hpet = (acpi_hpet_t *) current;
+	current += sizeof(acpi_hpet_t);
+	acpi_create_hpet(hpet);
+	acpi_add_table(rsdt,hpet);
+
+	/* If we want to use HPET Timers Linux wants an MADT */
+	current	  = ( current + 0x07) & -0x08;
+	printk_debug("ACPI:    * MADT at %lx\n",current);
+	madt = (acpi_madt_t *) current;
+	acpi_create_madt(madt);
+	current+=madt->header.length;
+	acpi_add_table(rsdt,madt);
+
+	/* SRAT */
+	current	  = ( current + 0x07) & -0x08;
+	printk_debug("ACPI:    * SRAT at %lx\n", current);
+	srat = (acpi_srat_t *) current;
+	acpi_create_srat(srat);
+	current+=srat->header.length;
+	acpi_add_table(rsdt,srat);
+
+	/* SLIT */
+	current	  = ( current + 0x07) & -0x08;
+	printk_debug("ACPI:   * SLIT at %lx\n", current);
+	slit = (acpi_slit_t *) current;
+	acpi_create_slit(slit);
+	current+=slit->header.length;
+	acpi_add_table(rsdt,slit);
+
+	/* SSDT */
+	current	  = ( current + 0x0f) & -0x10;
+	printk_debug("ACPI:    * SSDT at %lx\n", current);
+	ssdt = (acpi_header_t *)current;
+	current += ((acpi_header_t *)AmlCode_ssdt)->length;
+	memcpy((void *)ssdt, (void *)AmlCode_ssdt, ((acpi_header_t *)AmlCode_ssdt)->length);
+	//Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c
+	update_ssdt((void*)ssdt);
+	/* recalculate checksum */
+	ssdt->checksum = 0;
+	ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
+	acpi_add_table(rsdt,ssdt);
+
+	printk_debug("ACPI:    * SSDT for PState at %lx\n", current);
+	current = acpi_add_ssdt_pstates(rsdt, current);
+
+#if ACPI_SSDTX_NUM >= 1
+
+	/* same htio, but different possition? We may have to copy,
+	change HCIN, and recalculate the checknum and add_table */
+
+	for(i=1;i<sysconf.hc_possible_num;i++) {  // 0: is hc sblink
+		if((sysconf.pci1234[i] & 1) != 1 ) continue;
+		u8 c;
+		if(i<7) {
+			c  = (u8) ('4' + i - 1);
+		}
+		else {
+			c  = (u8) ('A' + i - 1 - 6);
+		}
+		current	  = ( current + 0x07) & -0x08;
+		printk_debug("ACPI:    * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt
+		ssdtx = (acpi_header_t *)current;
+		switch(sysconf.hcid[i]) {
+		case 1:
+			p = AmlCode_ssdt2;
+			break;
+		case 2:
+			p = AmlCode_ssdt3;
+			break;
+		case 3: //8131
+			 p = AmlCode_ssdt4;
+			 break;
+		 default:
+			//HTX no io apic
+			 p = AmlCode_ssdt5;
+		}
+		current += ((acpi_header_t *)p)->length;
+		memcpy((void *)ssdtx, (void *)p, ((acpi_header_t *)p)->length);
+		update_ssdtx((void *)ssdtx, i);
+		ssdtx->checksum = 0;
+		ssdtx->checksum = acpi_checksum((unsigned char *)ssdtx,ssdtx->length);
+		acpi_add_table(rsdt,ssdtx);
+	}
+#endif
+
+	/* DSDT */
+	current	  = ( current + 0x07) & -0x08;
+	printk_debug("ACPI:    * DSDT at %lx\n", current);
+	dsdt = (acpi_header_t *)current; // it will used by fadt
+	current += ((acpi_header_t *)AmlCode)->length;
+	memcpy((void *)dsdt,(void *)AmlCode, \
+			((acpi_header_t *)AmlCode)->length);
+	printk_debug("ACPI:    * DSDT @ %08x Length %x\n",dsdt,dsdt->length);
+
+	/* FACS */ // it needs 64 bit alignment
+	current	  = ( current + 0x07) & -0x08;
+	printk_debug("ACPI:	* FACS at %lx\n", current);
+	facs = (acpi_facs_t *) current; // it will be used by fadt
+	current += sizeof(acpi_facs_t);
+	acpi_create_facs(facs);
+
+	/* FDAT */
+	current	  = ( current + 0x07) & -0x08;
+	printk_debug("ACPI:    * FADT at %lx\n", current);
+	fadt = (acpi_fadt_t *) current;
+	current += sizeof(acpi_fadt_t);
+
+	acpi_create_fadt(fadt,facs,dsdt);
+	acpi_add_table(rsdt,fadt);
+
+#if DUMP_ACPI_TABLES == 1
+	printk_debug("rsdp\n");
+	dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+
+	printk_debug("rsdt\n");
+	dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+
+	printk_debug("madt\n");
+	dump_mem(madt, ((void *)madt) + madt->header.length);
+
+	printk_debug("srat\n");
+	dump_mem(srat, ((void *)srat) + srat->header.length);
+
+	printk_debug("slit\n");
+	dump_mem(slit, ((void *)slit) + slit->header.length);
+
+	printk_debug("ssdt\n");
+	dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+
+	printk_debug("fadt\n");
+	dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+#endif
+
+	printk_info("ACPI: done.\n");
+	return current;
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/apc_auto.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/apc_auto.c	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,115 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#define __ROMCC__
+
+#define RAMINIT_SYSINFO 1
+#define CACHE_AS_RAM_ADDRESS_DEBUG 0
+
+#define SET_NB_CFG_54 1
+
+//used by raminit
+#define QRANK_DIMM_SUPPORT 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#if CONFIG_USE_INIT == 0
+	#include "lib/memcpy.c"
+#endif
+#include "arch/i386/lib/console.c"
+
+#include <cpu/amd/model_10xxx_rev.h>
+#include "northbridge/amd/amdfam10/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+
+#include "lib/delay.c"
+
+#if NODE_NUMS == 64
+	 #define NODE_PCI(x,fn) ((x<32)?PCI_DEV(CBB,CDB+x,fn):PCI_DEV(CBB-1, CDB+x-32, fn))
+#else
+	 #define NODE_PCI(x, fn) PCI_DEV(CBB,CDB+x,fn)
+#endif
+
+//#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdfam10/reset_test.c"
+#include "northbridge/amd/amdfam10/debug.c"
+#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
+#include "northbridge/amd/amdfam10/amdfam10.h"
+
+#include "cpu/x86/mtrr.h"
+#include "cpu/amd/mtrr.h"
+#include "cpu/x86/tsc.h"
+
+#include "northbridge/amd/amdfam10/amdfam10_pci.c"
+#include "northbridge/amd/amdfam10/amdfam10_conf.c"
+#include "northbridge/amd/amdfam10/raminit_ddr2_dqs.c"
+
+#include "cpu/amd/quadcore/quadcore.c"
+
+void hardwaremain(int ret_addr)
+{
+	struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
+	struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
+
+	struct node_core_id id;
+
+	id = get_node_core_id_x();
+
+	printk_debug("CODE IN CACHE ON NODE: %02x\n");
+
+	train_ram(id.nodeid, sysinfo, sysinfox);
+
+	/* go back, but can not use stack any more, because we only keep
+	ret_addr and can not restore esp, and ebp */
+
+	__asm__ volatile (
+		"movl	%0, %%edi\n\t"
+		"jmp	  *%%edi\n\t"
+		:: "a"(ret_addr)
+	);
+
+
+
+}
+struct eregs {
+	u32 eax, ecx, edx, ebx, esp, ebp, esi, edi;
+	u32 vector;
+	u32 error_code;
+	u32 eip;
+	u32 cs;
+	u32 eflags;
+};
+
+void x86_exception(struct eregs *info)
+{
+	do {
+		hlt();
+	} while(1);
+}
+
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c	2007-12-12 16:54:54.000000000 -0700
@@ -0,0 +1,412 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#define ASSEMBLY 1
+#define __ROMCC__
+
+#define SYSTEM_TYPE 0	/* SERVER */
+//#define SYSTEM_TYPE 1	/* DESKTOP */
+//#define SYSTEM_TYPE 2	/* MOBILE */
+
+
+#define RAMINIT_SYSINFO 1
+#define CACHE_AS_RAM_ADDRESS_DEBUG 1
+
+#define DEBUG_SMBUS 1
+
+#define SET_NB_CFG_54 1
+
+//used by raminit
+#define QRANK_DIMM_SUPPORT 1
+
+//used by incoherent_ht
+#define FAM10_SCAN_PCI_BUS 0
+#define FAM10_ALLOCATE_IO_RANGE 0
+
+//used by init_cpus and fidvid
+#define FAM10_SET_FIDVID 1
+#define FAM10_SET_FIDVID_CORE_RANGE 0
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+
+/* FIXME: Use console.c post_code function */
+static void post_code(u8 value) {
+	outb(value, 0x80);
+}
+
+#if (USE_FAILOVER_IMAGE == 0)
+#include "arch/i386/lib/console.c"
+#include "pc80/serial.c"
+#include "ram/ramtest.c"
+#include <cpu/amd/model_10xxx_rev.h>
+#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
+#include "northbridge/amd/amdfam10/raminit.h"
+#include "northbridge/amd/amdfam10/amdfam10.h"
+#endif
+
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdfam10/reset_test.c"
+#include "cpu/x86/bist.h"
+
+
+#if (USE_FAILOVER_IMAGE == 0)
+
+ #if CONFIG_USE_INIT == 0
+ #include "lib/memcpy.c"
+ #endif
+
+#include "northbridge/amd/amdfam10/debug.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "northbridge/amd/amdfam10/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
+
+static void memreset_setup(void)
+{
+	//GPIO on amd8111 to enable MEMRST ????
+	outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);	// REVC_MEMRST_EN=1
+	outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+}
+
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+#define SMBUS_HUB 0x18
+	int ret,i;
+	u8 device = ctrl->spd_switch_addr;
+
+	printk_debug("switch i2c to : %02x for node %02x \n", device, ctrl->node_id);
+
+	/* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/
+	i=2;
+	do {
+		ret = smbus_write_byte(SMBUS_HUB, 0x01, (1<<(device & 0x7)));
+	} while ((ret!=0) && (i-->0));
+	smbus_write_byte(SMBUS_HUB, 0x03, 0);
+}
+
+
+static inline int spd_read_byte(u32 device, u32 address)
+{
+	int result;
+	result = smbus_read_byte(device, address);
+	return result;
+}
+
+#include "northbridge/amd/amdfam10/amdfam10.h"
+#include "northbridge/amd/amdht/ht_wrapper.c"
+
+#include "include/cpu/x86/mem.h"
+#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
+#include "northbridge/amd/amdfam10/raminit_amdmct.c"
+#include "northbridge/amd/amdfam10/amdfam10_pci.c"
+
+#include "resourcemap.c"
+#include "cpu/amd/quadcore/quadcore.c"
+#include "cpu/amd/car/copy_and_run.c"
+#include "cpu/amd/car/post_cache_as_ram.c"
+#include "cpu/amd/model_10xxx/init_cpus.c"
+#include "cpu/amd/model_10xxx/fidvid.c"
+
+#endif /* (USE_FAILOVER_IMAGE == 0) */
+
+
+#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1))
+#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
+#include "northbridge/amd/amdfam10/early_ht.c"
+
+void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	int last_boot_normal_flag = last_boot_normal();
+
+	/* Is this a cpu only reset? or Is this a secondary cpu? */
+	if ((cpu_init_detectedx) || (!boot_cpu())) {
+		if (last_boot_normal_flag) {
+			goto normal_image;
+		} else {
+			goto fallback_image;
+		}
+	}
+
+	/* Nothing special needs to be done to find bus 0 */
+	/* Allow the HT devices to be found */
+	/* mov bsp to bus 0xff when > 8 nodes */
+	set_bsp_node_CHtExtNodeCfgEn();
+	enumerate_ht_chain();
+
+	/* Setup the rom access for 4M */
+	amd8111_enable_rom();
+
+	/* Is this a deliberate reset by the bios */
+	if (bios_reset_detected() && last_boot_normal_flag) {
+		goto normal_image;
+	}
+	/* This is the primary cpu how should I boot? */
+	else if (do_normal_boot()) {
+		goto normal_image;
+	}
+	else {
+		goto fallback_image;
+	}
+
+normal_image:
+	__asm__ volatile ("jmp __normal_image"
+		 : /* outputs */
+		 : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+		);
+
+fallback_image:
+ #if HAVE_FAILOVER_BOOT==1
+	__asm__ volatile ("jmp __fallback_image"
+		 : /* outputs */
+		 : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+		)
+ #endif
+	;
+}
+#endif /* ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) */
+
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+//FIXME: I think that there is a hole here with the real_main() logic realmain is inside a USE_FAILOVER_IMAGE=0.
+#if HAVE_FAILOVER_BOOT==1
+ #if USE_FAILOVER_IMAGE==1
+	failover_process(bist, cpu_init_detectedx);
+ #else
+	real_main(bist, cpu_init_detectedx);
+ #endif
+#else
+ #if USE_FALLBACK_IMAGE == 1
+	failover_process(bist, cpu_init_detectedx);
+ #endif
+	real_main(bist, cpu_init_detectedx);
+#endif
+}
+
+
+#if (USE_FAILOVER_IMAGE==0)
+#include "spd_addr.h"
+#include "cpu/amd/microcode/microcode.c"
+#include "cpu/amd/model_10xxx/update_microcode.c"
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+
+	struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+	int needs_reset = 0;
+	u32 bsp_apicid = 0;
+	u32 val;
+	msr_t msr;
+
+	post_code(0x30);
+
+	if (bist == 0) {
+		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); //mmconf is inited in init_cpus
+		/* All cores run this but the BSP(node0,core0) is the only core that returns. */
+	}
+
+	post_code(0x32);
+
+	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+	uart_init();
+	console_init();
+	printk_debug("\n");
+
+//	dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE);
+
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+
+	// Load MPB
+	val = cpuid_eax(1);
+	printk_debug("Family_Model: %08x \n", val);
+
+	/* FIXME: Need to make sure that APs are updated with the microcode and Errata */
+	update_microcode(val);
+	post_code(0x33);
+
+	/* FIXME: This errata code needs to move out of the mainboard but I am not sure where to yet.*/
+	/* FIXME: Check CPU revision to apply correct erratas */
+	/* Rev B errata */
+	/* Errata #169 - supercedes errata #131 */
+	msr = rdmsr(0xC001001F);
+	msr.hi |= 1 << (32 - 32);
+	wrmsr(0xC001101F, msr);
+
+	/* Errata #202 [DIS_PIGGY_BACK_SCRUB]=1 */
+	msr = rdmsr(0xC0011022);
+	msr.hi |= 1 << 24;
+	wrmsr(0xC0010022, msr);
+
+	/* 298 : FIXME: Fixed in B3/C1 */
+/*	msr = rdmsr(0xC0010015);
+	msr.lo |= 1 << 3;
+	wrmsr(0xC0010015, msr);
+
+	msr = rdmsr(0xC0011023);
+	msr.lo |= 1 << 1;
+	wrmsr(0xC0010023, msr);
+*/
+	/* FIXME: Erratum #254 revB1 BU_CFG[21]=1 */
+
+
+	printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n");
+	setup_mb_resource_map();
+	post_code(0x34);
+
+//	dump_pci_device(PCI_DEV(CBB, CDB, 0));
+
+	printk_debug("bsp_apicid = %02x \n", bsp_apicid);
+	printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx);
+
+	/* Setup sysinfo defaults */
+	set_sysinfo_in_ram(0);
+
+	post_code(0x35);
+
+	// FIXME: Add needs_reset check to HT links.
+	amd_ht_init(sysinfo);
+//	print_pci_devices();
+//	dump_pci_devices();
+
+	post_code(0x36);
+
+	finalize_node_setup(sysinfo);
+
+	/* wait for all the APs core0 started by finalize_node_setup. */
+	/* FIXME: A bunch of cores are going to start output to serial at once.
+	   It would be nice to fixup prink spinlocks for ROM XIP mode.
+	   I think it could be done by putting the spinlock flag in the cache
+	   of the BSP located right after sysinfo.
+	 */
+	wait_all_core0_started();
+
+ #if CONFIG_LOGICAL_CPUS==1
+	// Core0 on each node is configured. Now setup any additional cores.
+	printk_debug("start_other_cores()\n");
+	start_other_cores();
+	post_code(0x37);
+	wait_all_other_cores_started(bsp_apicid);
+ #endif
+
+	post_code(0x38);
+
+ #if FAM10_SET_FIDVID == 1
+	msr = rdmsr(0xc0010071);
+	printk_debug("Begin MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+
+	/* FIXME: The sb fid change may survive the warm reset and only
+	   need to be done once.*/
+	enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+
+	post_code(0x39);
+
+	if (warm_reset_detect(0)) {			// BSP is node 0
+		init_fidvid_stage2(bsp_apicid, 0);	// BSP is node 0
+	} else {
+		needs_reset |= (init_fidvid_bsp(bsp_apicid, sysinfo->nodes) << 31);
+	}
+
+	post_code(0x3A);
+
+	set_p0();	// Speed up the BSP!
+
+	// show final fid and vid
+	msr=rdmsr(0xc0010071);
+	printk_debug("End MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+ #endif
+
+	// Reset for HT and FIDVID changes?
+	if (needs_reset) {
+		print_info("\tht reset -\n");
+		soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn);
+		die("After soft_reset_x - shouldn't see this message!!!\n");
+	}
+
+	post_code(0x3B);
+
+	//enable cf9 for hard reset
+	print_debug("enable_cf9_x()\n");
+	enable_cf9_x(sysinfo->sbbusn, sysinfo->sbdn);
+	post_code(0x3C);
+
+	//It's the time to set ctrl in sysinfo now;
+	printk_debug("fill_mem_ctrl()\n");
+	fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+	post_code(0x3D);
+
+
+	printk_debug("enable_smbus()\n");
+	enable_smbus();
+	post_code(0x3E);
+
+
+	memreset_setup();
+
+//	die("Die Before MCT init.");
+
+	post_code(0x40);
+	printk_debug("raminit_amdmct()\n");
+	raminit_amdmct(sysinfo);
+	post_code(0x41);
+
+
+/*
+	dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200);
+	dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200);
+	dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200);
+	dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200);
+*/
+
+//	ram_check(0x00200000, 0x00200000 + (640 * 1024));
+//	ram_check(0x40200000, 0x40200000 + (640 * 1024));
+
+
+//	die("After MCT init before CAR disabled.");
+
+	post_code(0x42);
+	printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
+	post_cache_as_ram();	// BSP switch stack to ram, copy then execute LB.
+	post_code(0x43);	// Should never see this post code.
+
+
+}
+
+
+#endif /* USE_FAILOVER_IMAGE==0 */
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/chip.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/chip.h	2007-12-12 16:37:32.000000000 -0700
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+extern struct chip_operations mainboard_amd_serengeti_cheetah_fam10_ops;
+
+struct mainboard_amd_serengeti_cheetah_fam10_config {
+//	int fixup_scsi;
+//	int fixup_vga;
+};
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/cmos.layout
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/cmos.layout	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,98 @@
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399	     1	     e	     2	      quad_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432	     8       h       0        boot_countdown
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        reserved_memory
+
+
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+8     0     400Mhz
+8     1     333Mhz
+8     2     266Mhz
+8     3     200Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
+
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,180 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+//AMD8111
+	Name (APIC, Package (0x04)
+	{
+		Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present
+		Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11},
+		Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12},
+		Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13}
+	})
+
+	Name (PICM, Package (0x04)
+	{
+		Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00},
+		Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00},
+		Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00},
+		Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00}
+	})
+
+	Name (DNCG, Ones)
+
+	Method (_PRT, 0, NotSerialized)
+	{
+		If (LEqual (^DNCG, Ones)) {
+			Store (DADD(\_SB.PCI0.SBDN, 0x0001ffff), Local0)
+			// Update the Device Number according to SBDN
+			Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0))
+			Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0))
+			Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0))
+			Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0))
+			Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0))
+			Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0))
+			Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0))
+			Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0))
+			Store (0x00, ^DNCG)
+		}
+		If (LNot (PICF)) {Return (PICM)}
+		Else {Return (APIC)}
+	}
+
+	Device (SBC3)
+	{
+		// acpi smbus it should be 0x00040003 if 8131 present
+		Method (_ADR, 0, NotSerialized)
+		{
+			Return (DADD(\_SB.PCI0.SBDN, 0x00010003))
+		}
+		OperationRegion (PIRQ, PCI_Config, 0x56, 0x02)
+		Field (PIRQ, ByteAcc, Lock, Preserve)
+		{
+			PIBA,   8,
+			PIDC,   8
+		}
+//
+//		OperationRegion (TS3_, PCI_Config, 0xC4, 0x02)
+//		Field (TS3_, DWordAcc, NoLock, Preserve)
+//		{
+//			PTS3,   16
+//		}
+//
+	}
+
+	Device (HPET)
+	{
+		Name (HPT, 0x00)
+		Name (_HID, EisaId ("PNP0103"))
+		Name (_UID, 0x00)
+		Method (_STA, 0, NotSerialized)
+		{
+			Return (0x0F)
+		}
+
+		Method (_CRS, 0, NotSerialized)
+		{
+			Name (BUF0, ResourceTemplate ()
+			{
+				Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400)
+			})
+			Return (BUF0)
+		}
+	}
+
+	Include ("amd8111_pic.asl")
+
+	Include ("amd8111_isa.asl")
+
+	Device (TP2P)
+	{
+		// 8111 P2P and it should 0x00030000 when 8131 present
+		Method (_ADR, 0, NotSerialized)
+		{
+			Return (DADD(\_SB.PCI0.SBDN, 0x00000000))
+		}
+
+		Method (_PRW, 0, NotSerialized)
+		{
+			If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x08, 0x03 }) }
+			Else { Return (Package (0x02) { 0x08, 0x01 }) }
+		}
+
+		Device (USB0)
+		{
+			Name (_ADR, 0x00000000)
+			Method (_PRW, 0, NotSerialized)
+			{
+				If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) }
+				Else { Return (Package (0x02) { 0x0F, 0x01 }) }
+			}
+		}
+
+		Device (USB1)
+		{
+			Name (_ADR, 0x00000001)
+			Method (_PRW, 0, NotSerialized)
+			{
+				If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) }
+				Else { Return (Package (0x02) { 0x0F, 0x01 }) }
+			}
+		}
+
+		Name (APIC, Package (0x0C)
+		{
+			Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB
+			Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 },
+			Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 },
+			Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 },
+
+			Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 4
+			Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 },
+			Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 },
+			Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 },
+
+			Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 3
+			Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 },
+			Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 },
+			Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 }
+		})
+
+		Name (PICM, Package (0x0C)
+		{
+			Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //USB
+			Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
+			Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 },
+
+			Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, //Slot 4
+			Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
+			Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 },
+
+			Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, //Slot 3
+			Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 },
+			Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }
+		})
+
+		Method (_PRT, 0, NotSerialized)
+		{
+			If (LNot (PICF)) { Return (PICM) }
+			Else { Return (APIC) }
+		}
+	}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111_isa.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111_isa.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,192 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+//AMD8111 isa
+
+	Device (ISA)
+	{
+		// lpc 0x00040000
+		Method (_ADR, 0, NotSerialized)
+		{
+			Return (DADD(\_SB.PCI0.SBDN, 0x00010000))
+		}
+
+		OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers
+		Field (PIRY, ByteAcc, NoLock, Preserve)
+		{
+			Z000,   2,	 // Parallel Port Range
+			 ,   1,
+			ECP,    1,	 // ECP Enable
+			FDC1,   1,	 // Floppy Drive Controller 1
+			FDC2,   1,	 // Floppy Drive Controller 2
+			Offset (0x01),
+			Z001,   3,	 // Serial Port A Range
+			SAEN,   1,	 // Serial Post A Enabled
+			Z002,   3,	 // Serial Port B Range
+			SBEN,   1	// Serial Post B Enabled
+		}
+
+		Device (PIC)
+		{
+			Name (_HID, EisaId ("PNP0000"))
+			Name (_CRS, ResourceTemplate ()
+			{
+				IO (Decode16, 0x0020, 0x0020, 0x01, 0x02)
+				IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02)
+				IRQ (Edge, ActiveHigh, Exclusive) {2}
+			})
+		}
+
+		Device (DMA1)
+		{
+			Name (_HID, EisaId ("PNP0200"))
+			Name (_CRS, ResourceTemplate ()
+			{
+				IO (Decode16, 0x0000, 0x0000, 0x01, 0x10)
+				IO (Decode16, 0x0080, 0x0080, 0x01, 0x10)
+				IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20)
+				DMA (Compatibility, NotBusMaster, Transfer16) {4}
+			})
+		}
+
+		Device (TMR)
+		{
+			Name (_HID, EisaId ("PNP0100"))
+			Name (_CRS, ResourceTemplate ()
+			{
+				IO (Decode16, 0x0040, 0x0040, 0x01, 0x04)
+				IRQ (Edge, ActiveHigh, Exclusive) {0}
+			})
+		}
+
+		Device (RTC)
+		{
+			Name (_HID, EisaId ("PNP0B00"))
+			Name (_CRS, ResourceTemplate ()
+			{
+				IO (Decode16, 0x0070, 0x0070, 0x01, 0x06)
+				IRQ (Edge, ActiveHigh, Exclusive) {8}
+			})
+		}
+
+		Device (SPKR)
+		{
+			Name (_HID, EisaId ("PNP0800"))
+			Name (_CRS, ResourceTemplate ()
+			{
+				IO (Decode16, 0x0061, 0x0061, 0x01, 0x01)
+			})
+		}
+
+		Device (COPR)
+		{
+			Name (_HID, EisaId ("PNP0C04"))
+			Name (_CRS, ResourceTemplate ()
+			{
+				IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10)
+				IRQ (Edge, ActiveHigh, Exclusive) {13}
+			})
+		}
+
+		Device (SYSR)
+		{
+			Name (_HID, EisaId ("PNP0C02"))
+			Name (_UID, 0x00)
+			Name (SYR1, ResourceTemplate ()
+			{
+				IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) //report Thor NVRAM
+				IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //report Thor NVRAM
+				IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80)
+				IO (Decode16, 0x0010, 0x0010, 0x01, 0x10)
+				IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E)
+				IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C)
+				IO (Decode16, 0x0062, 0x0062, 0x01, 0x02)
+				IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B)
+				IO (Decode16, 0x0076, 0x0076, 0x01, 0x0A)
+				IO (Decode16, 0x0090, 0x0090, 0x01, 0x10)
+				IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E)
+				IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10)
+				IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error
+				IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error
+				})
+			Method (_CRS, 0, NotSerialized)
+			{
+				Return (SYR1)
+			}
+		}
+
+		Device (MEM)
+		{
+			Name (_HID, EisaId ("PNP0C02"))
+			Name (_UID, 0x01)
+			Method (_CRS, 0, NotSerialized)
+			{
+				Name (BUF0, ResourceTemplate ()
+				{
+					Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF
+					Memory32Fixed (ReadWrite, 0x000C0000, 0x00000000) // video BIOS c0000-c8404
+					Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000) // I/O APIC
+					Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM
+					Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000) // Local APIC
+					Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS
+					Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
+					Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
+					Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
+					Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
+				})
+				// Read the Video Memory length
+				CreateDWordField (BUF0, 0x14, CLEN)
+				CreateDWordField (BUF0, 0x10, CBAS)
+
+				ShiftLeft (VGA1, 0x09, Local0)
+				Store (Local0, CLEN)
+
+				Return (BUF0)
+			}
+		}
+
+		Device (PS2M)
+		{
+			Name (_HID, EisaId ("PNP0F13"))
+			Name (_CRS, ResourceTemplate ()
+			{
+				IRQNoFlags () {12}
+			})
+			Method (_STA, 0, NotSerialized)
+			{
+				And (FLG0, 0x04, Local0)
+				If (LEqual (Local0, 0x04)) { Return (0x0F) }
+				Else { Return (0x00) }
+			}
+		}
+
+		Device (PS2K)
+		{
+			Name (_HID, EisaId ("PNP0303"))
+			Name (_CRS, ResourceTemplate ()
+			{
+				IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
+				IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
+				IRQNoFlags () {1}
+			})
+		}
+		Include ("superio.asl")
+
+	}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111_pic.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8111_pic.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,376 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+//AMD8111 pic LNKA B C D
+
+	Device (LNKA)
+	{
+		Name (_HID, EisaId ("PNP0C0F"))
+		Name (_UID, 0x01)
+		Method (_STA, 0, NotSerialized)
+		{
+			And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local0)
+			If (LEqual (Local0, 0x00)) { Return (0x09) } //Disabled
+			Else { Return (0x0B) } //Enabled
+		}
+
+		Method (_PRS, 0, NotSerialized)
+		{
+			 Name (BUFA, ResourceTemplate ()
+			{
+				IRQ (Level, ActiveLow, Shared) {3,5,10,11}
+			})
+			Return (BUFA)
+		}
+
+		Method (_DIS, 0, NotSerialized)
+		{
+			Store (0x01, Local3)
+			And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1)
+			Store (Local1, Local2)
+			If (LGreater (Local1, 0x07))
+			{
+				Subtract (Local1, 0x08, Local1)
+			}
+
+			ShiftLeft (Local3, Local1, Local3)
+			Not (Local3, Local3)
+			And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA)
+		}
+
+		Method (_CRS, 0, NotSerialized)
+		{
+			Name (BUFA, ResourceTemplate ()
+			{
+				IRQ (Level, ActiveLow, Shared) {}
+			})
+			CreateByteField (BUFA, 0x01, IRA1)
+			CreateByteField (BUFA, 0x02, IRA2)
+			Store (0x00, Local3)
+			Store (0x00, Local4)
+			And (\_SB.PCI0.SBC3.PIBA, 0x0F, Local1)
+			If (LNot (LEqual (Local1, 0x00)))
+			{	// Routing enable
+				If (LGreater (Local1, 0x07))
+				{
+					Subtract (Local1, 0x08, Local2)
+					ShiftLeft (One, Local2, Local4)
+				}
+				Else
+				{
+					If (LGreater (Local1, 0x00))
+					{
+						ShiftLeft (One, Local1, Local3)
+					}
+				}
+
+				Store (Local3, IRA1)
+				Store (Local4, IRA2)
+			}
+
+			Return (BUFA)
+		}
+
+		Method (_SRS, 1, NotSerialized)
+		{
+			CreateByteField (Arg0, 0x01, IRA1)
+			CreateByteField (Arg0, 0x02, IRA2)
+			ShiftLeft (IRA2, 0x08, Local0)
+			Or (Local0, IRA1, Local0)
+			Store (0x00, Local1)
+			ShiftRight (Local0, 0x01, Local0)
+			While (LGreater (Local0, 0x00))
+			{
+				Increment (Local1)
+				ShiftRight (Local0, 0x01, Local0)
+			}
+
+			And (\_SB.PCI0.SBC3.PIBA, 0xF0, \_SB.PCI0.SBC3.PIBA)
+			Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA)
+		}
+	}
+
+	Device (LNKB)
+	{
+		Name (_HID, EisaId ("PNP0C0F"))
+		Name (_UID, 0x02)
+		Method (_STA, 0, NotSerialized)
+		{
+			And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local0)
+			If (LEqual (Local0, 0x00)) { Return (0x09) }
+			Else { Return (0x0B) }
+		}
+
+		Method (_PRS, 0, NotSerialized)
+		{
+			Name (BUFB, ResourceTemplate ()
+			{
+				IRQ (Level, ActiveLow, Shared) {3,5,10,11}
+			})
+			Return (BUFB)
+		}
+
+		Method (_DIS, 0, NotSerialized)
+		{
+			Store (0x01, Local3)
+			And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1)
+			ShiftRight (Local1, 0x04, Local1)
+			Store (Local1, Local2)
+			If (LGreater (Local1, 0x07))
+			{
+				Subtract (Local1, 0x08, Local1)
+			}
+
+			ShiftLeft (Local3, Local1, Local3)
+			Not (Local3, Local3)
+			And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA)
+		}
+
+		Method (_CRS, 0, NotSerialized)
+		{
+			Name (BUFB, ResourceTemplate ()
+			{
+				IRQ (Level, ActiveLow, Shared) {}
+			})
+			CreateByteField (BUFB, 0x01, IRB1)
+			CreateByteField (BUFB, 0x02, IRB2)
+			Store (0x00, Local3)
+			Store (0x00, Local4)
+			And (\_SB.PCI0.SBC3.PIBA, 0xF0, Local1)
+			ShiftRight (Local1, 0x04, Local1)
+			If (LNot (LEqual (Local1, 0x00)))
+			{
+				If (LGreater (Local1, 0x07))
+				{
+				Subtract (Local1, 0x08, Local2)
+				ShiftLeft (One, Local2, Local4)
+				}
+				Else
+				{
+					If (LGreater (Local1, 0x00))
+					{
+						ShiftLeft (One, Local1, Local3)
+					}
+				}
+
+				Store (Local3, IRB1)
+				Store (Local4, IRB2)
+			}
+
+			Return (BUFB)
+		}
+
+		Method (_SRS, 1, NotSerialized)
+		{
+			CreateByteField (Arg0, 0x01, IRB1)
+			CreateByteField (Arg0, 0x02, IRB2)
+			ShiftLeft (IRB2, 0x08, Local0)
+			Or (Local0, IRB1, Local0)
+			Store (0x00, Local1)
+			ShiftRight (Local0, 0x01, Local0)
+			While (LGreater (Local0, 0x00))
+			{
+				Increment (Local1)
+				ShiftRight (Local0, 0x01, Local0)
+			}
+
+			And (\_SB.PCI0.SBC3.PIBA, 0x0F, \_SB.PCI0.SBC3.PIBA)
+			ShiftLeft (Local1, 0x04, Local1)
+			Or (\_SB.PCI0.SBC3.PIBA, Local1, \_SB.PCI0.SBC3.PIBA)
+		}
+	}
+
+	Device (LNKC)
+	{
+		Name (_HID, EisaId ("PNP0C0F"))
+		Name (_UID, 0x03)
+		Method (_STA, 0, NotSerialized)
+		{
+			And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local0)
+			If (LEqual (Local0, 0x00)) { Return (0x09) }
+			Else { Return (0x0B) }
+		}
+
+		Method (_PRS, 0, NotSerialized)
+		{
+			Name (BUFA, ResourceTemplate ()
+			{
+				IRQ (Level, ActiveLow, Shared) {3,5,10,11}
+			})
+			Return (BUFA)
+		}
+
+		Method (_DIS, 0, NotSerialized)
+		{
+			Store (0x01, Local3)
+			And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1)
+			Store (Local1, Local2)
+			If (LGreater (Local1, 0x07))
+			{
+				Subtract (Local1, 0x08, Local1)
+			}
+
+			ShiftLeft (Local3, Local1, Local3)
+			Not (Local3, Local3)
+			And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC)
+		}
+
+		Method (_CRS, 0, NotSerialized)
+		{
+			Name (BUFA, ResourceTemplate ()
+			{
+				IRQ (Level, ActiveLow, Shared) {}
+			})
+			CreateByteField (BUFA, 0x01, IRA1)
+			CreateByteField (BUFA, 0x02, IRA2)
+			Store (0x00, Local3)
+			Store (0x00, Local4)
+			And (\_SB.PCI0.SBC3.PIDC, 0x0F, Local1)
+			If (LNot (LEqual (Local1, 0x00)))
+			{
+				If (LGreater (Local1, 0x07))
+				{
+					Subtract (Local1, 0x08, Local2)
+					ShiftLeft (One, Local2, Local4)
+				}
+				Else
+				{
+					If (LGreater (Local1, 0x00))
+					{
+						ShiftLeft (One, Local1, Local3)
+					}
+				}
+
+				Store (Local3, IRA1)
+				Store (Local4, IRA2)
+			}
+
+			Return (BUFA)
+		}
+
+		Method (_SRS, 1, NotSerialized)
+		{
+			CreateByteField (Arg0, 0x01, IRA1)
+			CreateByteField (Arg0, 0x02, IRA2)
+			ShiftLeft (IRA2, 0x08, Local0)
+			Or (Local0, IRA1, Local0)
+			Store (0x00, Local1)
+			ShiftRight (Local0, 0x01, Local0)
+			While (LGreater (Local0, 0x00))
+			{
+				Increment (Local1)
+				ShiftRight (Local0, 0x01, Local0)
+			}
+
+			And (\_SB.PCI0.SBC3.PIDC, 0xF0, \_SB.PCI0.SBC3.PIDC)
+			Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC)
+		}
+	}
+
+	Device (LNKD)
+	{
+		Name (_HID, EisaId ("PNP0C0F"))
+		Name (_UID, 0x04)
+		Method (_STA, 0, NotSerialized)
+		{
+			And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local0)
+			If (LEqual (Local0, 0x00)) { Return (0x09) }
+			Else { Return (0x0B) }
+		}
+
+		Method (_PRS, 0, NotSerialized)
+		{
+			Name (BUFB, ResourceTemplate ()
+			{
+				IRQ (Level, ActiveLow, Shared) {3,5,10,11}
+			})
+			Return (BUFB)
+		}
+
+		Method (_DIS, 0, NotSerialized)
+		{
+			Store (0x01, Local3)
+			And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1)
+			ShiftRight (Local1, 0x04, Local1)
+			Store (Local1, Local2)
+			If (LGreater (Local1, 0x07))
+			{
+				Subtract (Local1, 0x08, Local1)
+			}
+
+			ShiftLeft (Local3, Local1, Local3)
+			Not (Local3, Local3)
+			And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC)
+		}
+
+		Method (_CRS, 0, NotSerialized)
+		{
+			Name (BUFB, ResourceTemplate ()
+			{
+				IRQ (Level, ActiveLow, Shared) {}
+			})
+			CreateByteField (BUFB, 0x01, IRB1)
+			CreateByteField (BUFB, 0x02, IRB2)
+			Store (0x00, Local3)
+			Store (0x00, Local4)
+			And (\_SB.PCI0.SBC3.PIDC, 0xF0, Local1)
+			ShiftRight (Local1, 0x04, Local1)
+			If (LNot (LEqual (Local1, 0x00)))
+			{
+				If (LGreater (Local1, 0x07))
+				{
+					Subtract (Local1, 0x08, Local2)
+					ShiftLeft (One, Local2, Local4)
+				}
+				Else
+				{
+					If (LGreater (Local1, 0x00))
+					{
+						ShiftLeft (One, Local1, Local3)
+					}
+				}
+
+				Store (Local3, IRB1)
+				Store (Local4, IRB2)
+			}
+
+			Return (BUFB)
+		}
+
+		Method (_SRS, 1, NotSerialized)
+		{
+			CreateByteField (Arg0, 0x01, IRB1)
+			CreateByteField (Arg0, 0x02, IRB2)
+			ShiftLeft (IRB2, 0x08, Local0)
+			Or (Local0, IRB1, Local0)
+			Store (0x00, Local1)
+			ShiftRight (Local0, 0x01, Local0)
+			While (LGreater (Local0, 0x00))
+			{
+				Increment (Local1)
+				ShiftRight (Local0, 0x01, Local0)
+			}
+
+			And (\_SB.PCI0.SBC3.PIDC, 0x0F, \_SB.PCI0.SBC3.PIDC)
+			ShiftLeft (Local1, 0x04, Local1)
+			Or (\_SB.PCI0.SBC3.PIDC, Local1, \_SB.PCI0.SBC3.PIDC)
+		}
+	}
+
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8131_2.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8131_2.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,126 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+	Device (PG0A)
+	{
+		// 8132 pcix bridge
+		Method (_ADR, 0, NotSerialized)
+		{
+			Return (DADD(GHCD(HCIN, 0), 0x00000000))
+		}
+
+		Method (_PRW, 0, NotSerialized)
+		{
+			If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) }
+			Else { Return (Package (0x02) { 0x29, 0x01 }) }
+		}
+
+		Name (APIC, Package (0x04)
+		{
+			// Slot A - PIRQ BCDA
+			Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x0018 }, //Slot 2
+			Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0019 },
+			Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x001A },
+			Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x001B },
+		})
+		Name (PICM, Package (0x04)
+		{
+			Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 2
+			Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
+			Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 },
+		})
+
+		Name (DNCG, Ones)
+
+		Method (_PRT, 0, NotSerialized)
+		{
+			If (LEqual (^DNCG, Ones))
+			{
+				Multiply (HCIN, 0x0008, Local2) // GSI for 8132 is 4 so we get 8
+				Store (0x00, Local1)
+				While (LLess (Local1, 0x04))
+				{
+					// Update the GSI according to HCIN
+					Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0)
+					Add(Local2, Local0, Local0)
+					Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3))
+					Increment (Local1)
+				}
+				Store (0x00, ^DNCG)
+			}
+			If (LNot (PICF)) { Return (PICM) }
+			Else { Return (APIC) }
+		}
+	}
+
+	Device (PG0B)
+	{
+		// 8132 pcix bridge 2
+		Method (_ADR, 0, NotSerialized)
+		{
+			Return (DADD(GHCD(HCIN, 0), 0x00010000))
+		}
+
+		Method (_PRW, 0, NotSerialized)
+		{
+			If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) }
+			Else { Return (Package (0x02) { 0x22, 0x01 }) }
+		}
+
+		Name (APIC, Package (0x04)
+		{
+			// Slot A - PIRQ ABCD
+			Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x001F },// Slot 1
+			Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0020 },
+			Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x0021 },
+			Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x0022 }
+		})
+		Name (PICM, Package (0x04)
+		{
+			Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 1
+			Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
+			Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }
+		})
+
+		Name (DNCG, Ones)
+
+		Method (_PRT, 0, NotSerialized)
+		{
+			If (LEqual (^DNCG, Ones))
+			{
+				Multiply (HCIN, 0x0008, Local2) // GSI for 8132 is 4 so we get 8
+				Store (0x00, Local1)
+				While (LLess (Local1, 0x04))
+				{
+					// Update the GSI according to HCIN
+					Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0)
+					Add(Local2, Local0, Local0)
+					Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3))
+					Increment (Local1)
+				}
+
+				Store (0x00, ^DNCG)
+
+			}
+
+			If (LNot (PICF)) { Return (PICM) }
+			Else { Return (APIC) }
+		}
+	}
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8132.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8132.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,134 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+	Device (PG0A)
+	{
+		// 8132 pcix bridge
+		Method (_ADR, 0, NotSerialized)
+		{
+			Return (DADD(GHCD(HCIN, 0), 0x00000000))
+		}
+
+		Method (_PRW, 0, NotSerialized)
+		{
+			If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) }
+			Else { Return (Package (0x02) { 0x29, 0x01 }) }
+		}
+
+		Name (APIC, Package (0x14)
+		{
+			// Slot A - PIRQ BCDA
+			Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 2
+			Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A },
+			Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B },
+			Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 },
+
+			//Cypress Slot A - PIRQ BCDA
+			Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x19 }, //?
+			Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1A },
+			Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x1B },
+			Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x18 },
+
+			//Cypress Slot B - PIRQ CDAB
+			Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x1A }, //?
+			Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x1B },
+			Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x18 },
+			Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x19 },
+
+			//Cypress Slot C - PIRQ DABC
+			Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x1B }, //?
+			Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x18 },
+			Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x19 },
+			Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x1A },
+
+			//Cypress Slot D - PIRQ ABCD
+			Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x18 }, //?
+			Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x19 },
+			Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x1A },
+			Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x1B }
+		})
+		Name (PICM, Package (0x14)
+		{
+			Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },//Slot 2
+			Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 },
+			Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 },
+
+			Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },
+			Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0003FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 },
+			Package (0x04) { 0x0003FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 },
+
+			Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 },
+			Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 },
+			Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 },
+
+			Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 },
+			Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 },
+			Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 },
+			Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 },
+
+			Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },
+			Package (0x04) { 0x0006FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
+			Package (0x04) { 0x0006FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0006FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }
+		})
+		Method (_PRT, 0, NotSerialized)
+		{
+			If (LNot (PICF)) { Return (PICM) }
+			Else { Return (APIC) }
+		}
+	}
+
+	Device (PG0B)
+	{
+		// 8132 pcix bridge 2
+		Method (_ADR, 0, NotSerialized)
+		{
+			Return (DADD(GHCD(HCIN, 0), 0x00010000))
+		}
+
+		Method (_PRW, 0, NotSerialized)
+		{
+			If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) }
+			Else { Return (Package (0x02) { 0x22, 0x01 }) }
+		}
+
+		Name (APIC, Package (0x04)
+		{
+			// Slot A - PIRQ ABCD
+			Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1F },// Slot 1
+			Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x20 },
+			Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x21 },
+			Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x22 }
+		})
+		Name (PICM, Package (0x04)
+		{
+			Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 1
+			Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
+			Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }
+		})
+		Method (_PRT, 0, NotSerialized)
+		{
+			If (LNot (PICF)) { Return (PICM) }
+			Else { Return (APIC) }
+		}
+	}
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8132_2.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8132_2.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,191 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+	Device (PG0A)
+	{
+		// 8132 pcix bridge
+		Method (_ADR, 0, NotSerialized)
+		{
+			Return (DADD(GHCD(HCIN, 0), 0x00000000))
+		}
+
+		Method (_PRW, 0, NotSerialized)
+		{
+			If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) }
+			Else { Return (Package (0x02) { 0x29, 0x01 }) }
+		}
+
+		Name (APIC, Package (0x10)
+		{
+		// Slot 1 - PIRQ ABCD
+			Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x0018 },
+			Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0019 },
+			Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x001A },
+			Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x001B },
+			// Slot 2 - PIRQ BCDA
+			Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x0019 },
+			Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x001A },
+			Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x001B },
+			Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x0018 },
+			// Slot 3 - PIRQ CDAB
+			Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x001A },
+			Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x001B },
+			Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x0018 },
+			Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x0019 },
+			// Slot 4 - PIRQ DABC
+			Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x001B },
+			Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x0018 },
+			Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x0019 },
+			Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x001A },
+
+		})
+		Name (PICM, Package (0x04)
+		{
+			Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 2
+			Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
+			Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 },
+//
+//			Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },//Slot 2
+//			Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 },
+//			Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 },
+//			Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 },
+//
+//			Package (0x04) { 0x0002FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 },//Slot 2
+//			Package (0x04) { 0x0002FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 },
+//			Package (0x04) { 0x0002FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 },
+//			Package (0x04) { 0x0002FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 },
+//
+//			Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 },//Slot 2
+//			Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 },
+//			Package (0x04) { 0x0003FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 },
+//			Package (0x04) { 0x0003FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 },
+//
+		})
+
+		Name (DNCG, Ones)
+
+		Method (_PRT, 0, NotSerialized)
+		{
+			If (LEqual (^DNCG, Ones)) {
+				Multiply (HCIN, 0x000e, Local2) // GSI for 8132 is 7 so we get 14
+				Store (0x00, Local1)
+				While (LLess (Local1, 0x10))
+				{
+					// Update the GSI according to HCIN
+					Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0)
+					Add(Local2, Local0, Local0)
+					Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3))
+					Increment (Local1)
+				}
+
+				Store (0x00, ^DNCG)
+
+			}
+
+			If (LNot (PICF)) { Return (PICM) }
+			Else { Return (APIC) }
+		}
+	}
+
+	Device (PG0B)
+	{
+		// 8132 pcix bridge 2
+		Method (_ADR, 0, NotSerialized)
+		{
+			Return (DADD(GHCD(HCIN, 0), 0x00010000))
+		}
+
+		Method (_PRW, 0, NotSerialized)
+		{
+			If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) }
+			Else { Return (Package (0x02) { 0x22, 0x01 }) }
+		}
+
+		Name (APIC, Package (0x10)
+		{
+			// Slot A - PIRQ ABCD
+			Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x001F },// Slot 1
+			Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x0020 },
+			Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x0021 },
+			Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x0022 },
+			// Slot A - PIRQ BCDA
+			Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x0020 },// Slot 1
+			Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0021 },
+			Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x0022 },
+			Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x001F },
+			// Slot A - PIRQ CDAB
+			Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x0021 },// Slot 1
+			Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x0022 },
+			Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x001F },
+			Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x0020 },
+			// Slot A - PIRQ DABC
+			Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x0022 },// Slot 1
+			Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x001F },
+			Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x0020 },
+			Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x0021 },
+		})
+		Name (PICM, Package (0x04)
+		{
+			Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },//Slot 1
+			Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
+			Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 },
+
+//			Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 },//Slot 1
+//			Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 },
+//			Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 },
+//			Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 },
+//
+//			Package (0x04) { 0x0002FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 },//Slot 1
+//			Package (0x04) { 0x0002FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 },
+//			Package (0x04) { 0x0002FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 },
+//			Package (0x04) { 0x0002FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 },
+//
+//			Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 },//Slot 1
+//			Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 },
+//			Package (0x04) { 0x0003FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 },
+//			Package (0x04) { 0x0003FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 },
+//
+		})
+
+		Name (DNCG, Ones)
+
+		Method (_PRT, 0, NotSerialized)
+		{
+			If (LEqual (^DNCG, Ones)) {
+				Multiply (HCIN, 0x000e, Local2) // GSI for 8132 is 7 so we get 14
+				Store (0x00, Local1)
+				While (LLess (Local1, 0x10))
+				{
+					// Update the GSI according to HCIN
+					Store(DeRefOf(Index (DeRefOf (Index (APIC, Local1)), 3)), Local0)
+					Add(Local2, Local0, Local0)
+					Store(Local0, Index (DeRefOf (Index (APIC, Local1)), 3))
+					Increment (Local1)
+				}
+
+			Store (0x00, ^DNCG)
+
+			}
+
+			If (LNot (PICF)) { Return (PICM) }
+			Else { Return (APIC) }
+		}
+	}
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8151.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amd8151.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,48 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+// AMD8151
+	Device (AGPB)
+	{
+		Method (_ADR, 0, NotSerialized)
+		{
+			Return (DADD(GHCD(HCIN, 0), 0x00010000))
+		}
+
+		Name (APIC, Package (0x04)
+		{
+			Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 },
+			Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 },
+			Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 },
+			Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }
+		})
+		Name (PICM, Package (0x04)
+		{
+			Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 },
+			Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKB, 0x00 },
+			Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKC, 0x00 },
+			Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }
+		})
+		Method (_PRT, 0, NotSerialized)
+		{
+			If (LNot (PICF)) { Return (PICM) }
+			Else { Return (APIC) }
+		}
+	}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/dsdt_lb.dsl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/dsdt_lb.dsl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,242 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+DefinitionBlock ("DSDT.aml", "DSDT", 1, "AMD-FAM10", "AMDACPI", 100925440)
+{
+
+//	Scope (_PR)
+//	{
+//		Processor (CPU0, 0x00, 0x0000C010, 0x06) {}
+//		Processor (CPU1, 0x01, 0x00000000, 0x00) {}
+//		Processor (CPU2, 0x02, 0x00000000, 0x00) {}
+//		Processor (CPU3, 0x03, 0x00000000, 0x00) {}
+//	}
+
+	Method (FWSO, 0, NotSerialized) { }
+
+	Name (_S0, Package (0x04) { 0x00, 0x00, 0x00, 0x00 })
+	Name (_S1, Package (0x04) { 0x01, 0x01, 0x01, 0x01 })
+	Name (_S3, Package (0x04) { 0x05, 0x05, 0x05, 0x05 })
+	Name (_S5, Package (0x04) { 0x07, 0x07, 0x07, 0x07 })
+
+	Scope (_SB)
+	{
+		Device (PCI0)
+		{
+			// BUS0 root bus
+			External (BUSN)
+			External (MMIO)
+			External (PCIO)
+			External (SBLK)
+			External (TOM1)
+			External (HCLK)
+			External (SBDN)
+			External (HCDN)
+			External (CBST)
+			External (CBB)
+			External (CBS2)
+			External (CBB2)
+
+			Name (_HID, EisaId ("PNP0A03"))
+			Name (_ADR, 0x00000000)
+			Name (_UID, 0x01)
+
+			Name (HCIN, 0x00)  // HC1
+
+			Method (_BBN, 0, NotSerialized)
+			{
+				Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
+			}
+
+			Method (_CRS, 0, NotSerialized)
+			{
+				Name (BUF0, ResourceTemplate ()
+				{
+					IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) //CF8-CFFh
+					IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h
+					IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h
+
+					WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+						0x0000, // Address Space Granularity
+						0x8100, // Address Range Minimum
+						0xFFFF, // Address Range Maximum
+						0x0000, // Address Translation Offset
+						0x7F00,,,
+						, TypeStatic)	  //8100h-FFFFh
+
+					DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+						0x00000000, // Address Space Granularity
+						0x000C0000, // Address Range Minimum
+						0x00000000, // Address Range Maximum
+						0x00000000, // Address Translation Offset
+						0x00000000,,,
+						, AddressRangeMemory, TypeStatic)   //Video BIOS A0000h-C7FFFh
+
+					Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF
+
+					WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+						0x0000, // Address Space Granularity
+						0x0000, // Address Range Minimum
+						0x03AF, // Address Range Maximum
+						0x0000, // Address Translation Offset
+						0x03B0,,,
+						, TypeStatic)	//0-CF7h
+
+					WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+						0x0000, // Address Space Granularity
+						0x03E0, // Address Range Minimum
+						0x0CF7, // Address Range Maximum
+						0x0000, // Address Translation Offset
+						0x0918,,,
+						, TypeStatic)	//0-CF7h
+				})
+				\_SB.OSTP ()
+				CreateDWordField (BUF0, 0x3E, VLEN)
+				CreateDWordField (BUF0, 0x36, VMAX)
+				CreateDWordField (BUF0, 0x32, VMIN)
+				ShiftLeft (VGA1, 0x09, Local0)
+				Add (VMIN, Local0, VMAX)
+				Decrement (VMAX)
+				Store (Local0, VLEN)
+				Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1)
+				Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2)
+				Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3)
+				Return (Local3)
+			}
+
+			Include ("pci0_hc.asl")
+
+		}
+		Device (PCI1)
+		{
+			Name (_HID, "PNP0A03")
+			Name (_ADR, 0x00000000)
+			Name (_UID, 0x02)
+			Method (_STA, 0, NotSerialized)
+			{
+				Return (\_SB.PCI0.CBST)
+			}
+			Method (_BBN, 0, NotSerialized)
+			{
+				Return (\_SB.PCI0.CBB) // 0 or 0xff
+			}
+
+		}
+		Device (PCI2)
+		{
+			Name (_HID, "PNP0A03")
+			Name (_ADR, 0x00000000)
+			Name (_UID, 0x02)
+			Method (_STA, 0, NotSerialized)
+			{
+				Return (\_SB.PCI0.CBS2)
+			}
+			Method (_BBN, 0, NotSerialized)
+			{
+				Return (\_SB.PCI0.CBB2)// 0xfe
+			}
+		}
+	}
+
+	Scope (_GPE)
+	{
+		Method (_L08, 0, NotSerialized)
+		{
+			Notify (\_SB.PCI0, 0x02) //PME# Wakeup
+		}
+
+		Method (_L0F, 0, NotSerialized)
+		{
+			Notify (\_SB.PCI0.TP2P.USB0, 0x02)	 //USB Wakeup
+		}
+
+		Method (_L22, 0, NotSerialized) // GPIO18 (LID) - Pogo 0 Bridge B
+		{
+			Notify (\_SB.PCI0.PG0B, 0x02)
+		}
+
+		Method (_L29, 0, NotSerialized) // GPIO25 (Suspend) - Pogo 0 Bridge A
+		{
+			Notify (\_SB.PCI0.PG0A, 0x02)
+		}
+	}
+
+	Method (_PTS, 1, NotSerialized)
+	{
+		Or (Arg0, 0xF0, Local0)
+		Store (Local0, DBG1)
+	}
+//
+//	Method (_WAK, 1, NotSerialized)
+//	{
+//		Or (Arg0, 0xE0, Local0)
+//		Store (Local0, DBG1)
+//	}
+
+	Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode
+	Method (_PIC, 1, NotSerialized) //PIC Flag and Interface Method
+	{
+		Store (Arg0, PICF)
+	}
+
+	OperationRegion (DEBG, SystemIO, 0x80, 0x01)
+	Field (DEBG, ByteAcc, Lock, Preserve)
+	{
+		DBG1, 8
+	}
+
+	OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04)
+	Field (EXTM, WordAcc, Lock, Preserve)
+	{
+		AMEM, 32
+	}
+
+	OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01)
+	Field (VGAM, ByteAcc, Lock, Preserve)
+	{
+		VGA1, 8
+	}
+
+	OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100)
+	Field (GRAM, ByteAcc, Lock, Preserve)
+	{
+		Offset (0x10),
+		FLG0, 8
+	}
+
+	OperationRegion (GSTS, SystemIO, 0xC028, 0x02)
+	Field (GSTS, ByteAcc, NoLock, Preserve)
+	{
+		, 4,
+		IRQR, 1
+	}
+
+	OperationRegion (Z007, SystemIO, 0x21, 0x01)
+	Field (Z007, ByteAcc, NoLock, Preserve)
+	{
+		Z008, 8
+	}
+
+	OperationRegion (Z009, SystemIO, 0xA1, 0x01)
+	Field (Z009, ByteAcc, NoLock, Preserve)
+	{
+		Z00A, 8
+	}
+
+	Include ("amdfam10_util.asl")
+}
\ No newline at end of file
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/htx_no_ioapic.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/htx_no_ioapic.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,35 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+	Device (HTXA)
+	{
+		//  HTX
+		Method (_ADR, 0, NotSerialized)
+		{
+			Return (DADD(GHCD(HCIN, 0), 0x00000000))
+		}
+
+		Method (_PRW, 0, NotSerialized)
+		{
+			If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) }
+			Else { Return (Package (0x02) { 0x29, 0x01 }) }
+		}
+
+	}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci0_hc.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci0_hc.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+	Include ("amd8111.asl") //real SB at first
+	Include ("amd8132.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci2.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci2.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,83 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+DefinitionBlock ("SSDT2.aml", "SSDT", 1, "AMD-FAM10", "AMDACPI", 100925440)
+{
+	Scope (_SB)
+	{
+		External (DADD, MethodObj)
+		External (GHCE, MethodObj)
+		External (GHCN, MethodObj)
+		External (GHCL, MethodObj)
+		External (GHCD, MethodObj)
+		External (GNUS, MethodObj)
+		External (GIOR, MethodObj)
+		External (GMEM, MethodObj)
+		External (GWBN, MethodObj)
+		External (GBUS, MethodObj)
+
+		External (PICF)
+
+		External (\_SB.PCI0.LNKA, DeviceObj)
+		External (\_SB.PCI0.LNKB, DeviceObj)
+		External (\_SB.PCI0.LNKC, DeviceObj)
+		External (\_SB.PCI0.LNKD, DeviceObj)
+
+		Device (PCIX)
+		{
+
+		// BUS ? Second HT Chain
+		Name (HCIN, 0xcc)  // HC2 0x01
+
+		Name (_UID,	 0xdd)	// HC 0x03
+
+		Name (_HID, "PNP0A03")
+
+		Method (_ADR, 0, NotSerialized) //Fake bus should be 0
+		{
+			Return (DADD(GHCN(HCIN), 0x00000000))
+		}
+
+		Method (_BBN, 0, NotSerialized)
+		{
+			 Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
+		}
+
+		Method (_STA, 0, NotSerialized)
+		{
+			Return (\_SB.GHCE(HCIN))
+		}
+
+		Method (_CRS, 0, NotSerialized)
+		{
+			Name (BUF0, ResourceTemplate () { })
+			Store( GHCN(HCIN), Local4)
+			Store( GHCL(HCIN), Local5)
+
+			Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1)
+			Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2)
+			Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3)
+			Return (Local3)
+		}
+
+			Include ("pci2_hc.asl")
+		}
+	}
+
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci2_hc.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci2_hc.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+	Include ("amd8132_2.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci3.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci3.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,83 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+DefinitionBlock ("SSDT3.aml", "SSDT", 1, "AMD-FAM10", "AMDACPI", 100925440)
+{
+	Scope (_SB)
+	{
+		External (DADD, MethodObj)
+		External (GHCE, MethodObj)
+		External (GHCN, MethodObj)
+		External (GHCL, MethodObj)
+		External (GHCD, MethodObj)
+		External (GNUS, MethodObj)
+		External (GIOR, MethodObj)
+		External (GMEM, MethodObj)
+		External (GWBN, MethodObj)
+		External (GBUS, MethodObj)
+
+		External (PICF)
+
+		External (\_SB.PCI0.LNKA, DeviceObj)
+		External (\_SB.PCI0.LNKB, DeviceObj)
+		External (\_SB.PCI0.LNKC, DeviceObj)
+		External (\_SB.PCI0.LNKD, DeviceObj)
+
+		Device (PCIX)
+		{
+
+			// BUS ? Second HT Chain
+			Name (HCIN, 0xcc)  // HC2 0x01
+
+			Name (_UID,	 0xdd)	// HC 0x03
+
+			Name (_HID, "PNP0A03")
+
+			Method (_ADR, 0, NotSerialized) //Fake bus should be 0
+			{
+				Return (DADD(GHCN(HCIN), 0x00000000))
+			}
+
+			Method (_BBN, 0, NotSerialized)
+			{
+				Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
+			}
+
+			Method (_STA, 0, NotSerialized)
+			{
+				Return (\_SB.GHCE(HCIN))
+			}
+
+			Method (_CRS, 0, NotSerialized)
+			{
+				Name (BUF0, ResourceTemplate () { })
+				Store( GHCN(HCIN), Local4)
+				Store( GHCL(HCIN), Local5)
+
+				Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1)
+				Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2)
+				Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3)
+				Return (Local3)
+			}
+
+			Include ("pci3_hc.asl")
+		}
+	}
+
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci3_hc.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci3_hc.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+	Include ("amd8151.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci4.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci4.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,83 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+DefinitionBlock ("SSDT4.aml", "SSDT", 1, "AMD-FAM10", "AMDACPI", 100925440)
+{
+	Scope (_SB)
+	{
+		External (DADD, MethodObj)
+		External (GHCE, MethodObj)
+		External (GHCN, MethodObj)
+		External (GHCL, MethodObj)
+		External (GHCD, MethodObj)
+		External (GNUS, MethodObj)
+		External (GIOR, MethodObj)
+		External (GMEM, MethodObj)
+		External (GWBN, MethodObj)
+		External (GBUS, MethodObj)
+
+		External (PICF)
+
+		External (\_SB.PCI0.LNKA, DeviceObj)
+		External (\_SB.PCI0.LNKB, DeviceObj)
+		External (\_SB.PCI0.LNKC, DeviceObj)
+		External (\_SB.PCI0.LNKD, DeviceObj)
+
+		Device (PCIX)
+		{
+
+			// BUS ? Second HT Chain
+			Name (HCIN, 0xcc)  // HC2 0x01
+
+			Name (_UID,	 0xdd)	// HC 0x03
+
+			Name (_HID, "PNP0A03")
+
+			Method (_ADR, 0, NotSerialized) //Fake bus should be 0
+			{
+				Return (DADD(GHCN(HCIN), 0x00000000))
+			}
+
+			Method (_BBN, 0, NotSerialized)
+			{
+				Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
+			}
+
+			Method (_STA, 0, NotSerialized)
+			{
+				Return (\_SB.GHCE(HCIN))
+			}
+
+			Method (_CRS, 0, NotSerialized)
+			{
+				Name (BUF0, ResourceTemplate () { })
+				Store( GHCN(HCIN), Local4)
+				Store( GHCL(HCIN), Local5)
+
+				Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1)
+				Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2)
+				Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3)
+				Return (Local3)
+			}
+
+			Include ("pci4_hc.asl")
+		}
+	}
+
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci4_hc.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci4_hc.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+	Include ("amd8131_2.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci5.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci5.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,84 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+DefinitionBlock ("SSDT5.aml", "SSDT", 1, "AMD-FAM10", "AMDACPI", 100925440)
+{
+	Scope (_SB)
+	{
+	External (DADD, MethodObj)
+	External (GHCE, MethodObj)
+	External (GHCN, MethodObj)
+	External (GHCL, MethodObj)
+	External (GHCD, MethodObj)
+	External (GNUS, MethodObj)
+	External (GIOR, MethodObj)
+	External (GMEM, MethodObj)
+	External (GWBN, MethodObj)
+	External (GBUS, MethodObj)
+
+	External (PICF)
+
+	External (\_SB.PCI0.LNKA, DeviceObj)
+	External (\_SB.PCI0.LNKB, DeviceObj)
+	External (\_SB.PCI0.LNKC, DeviceObj)
+	External (\_SB.PCI0.LNKD, DeviceObj)
+
+		Device (PCIX)
+		{
+
+			// BUS ? Second HT Chain
+			Name (HCIN, 0xcc)  // HC2 0x01
+
+			Name (_UID,	 0xdd)	// HC 0x03
+
+			Name (_HID, "PNP0A03")
+
+			Method (_ADR, 0, NotSerialized) //Fake bus should be 0
+			{
+				Return (DADD(GHCN(HCIN), 0x00000000))
+			}
+
+			Method (_BBN, 0, NotSerialized)
+			{
+				Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
+			}
+
+			Method (_STA, 0, NotSerialized)
+			{
+				Return (\_SB.GHCE(HCIN))
+			}
+
+			Method (_CRS, 0, NotSerialized)
+			{
+				Name (BUF0, ResourceTemplate () { })
+				Store( GHCN(HCIN), Local4)
+				Store( GHCL(HCIN), Local5)
+
+				Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1)
+				Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2)
+				Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3)
+				Return (Local3)
+			}
+
+			Include ("pci5_hc.asl")
+		}
+	}
+
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci5_hc.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/pci5_hc.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+	Include ("htx_no_ioapic.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/superio.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/superio.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,20 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+//	Include ("w83627hf.asl")
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/fadt.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/fadt.c	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,172 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2005 Stefan Reinauer <stepan@openbios.org>
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ */
+
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+
+extern u32 pm_base; /* pm_base should be set in sb acpi */
+
+void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){
+
+	acpi_header_t *header=&(fadt->header);
+
+	printk_debug("pm_base: 0x%04x\n", pm_base);
+
+	/* Prepare the header */
+	memset((void *)fadt,0,sizeof(acpi_fadt_t));
+	memcpy(header->signature,"FACP",4);
+	header->length = 244;
+	header->revision = 1;
+	memcpy(header->oem_id,OEM_ID,6);
+	memcpy(header->oem_table_id,"LXBACPI ",8);
+	memcpy(header->asl_compiler_id,ASLC,4);
+	header->asl_compiler_revision=0;
+
+	fadt->firmware_ctrl=(u32)facs;
+	fadt->dsdt= (u32)dsdt;
+	fadt->res1=0x0;
+	// 3=Workstation,4=Enterprise Server, 7=Performance Server
+	fadt->preferred_pm_profile=0x03;
+	fadt->sci_int=9;
+	// disable system management mode by setting to 0:
+	fadt->smi_cmd = 0;//pm_base+0x2f;
+	fadt->acpi_enable = 0xf0;
+	fadt->acpi_disable = 0xf1;
+	fadt->s4bios_req = 0x0;
+	fadt->pstate_cnt = 0x00; // SMM is not used for p-state control
+//	fadt->pstate_cnt = 0xe2;
+
+	fadt->pm1a_evt_blk = pm_base;
+	fadt->pm1b_evt_blk = 0x0000;
+	fadt->pm1a_cnt_blk = pm_base+0x04;
+	fadt->pm1b_cnt_blk = 0x0000;
+	fadt->pm2_cnt_blk  = 0x0000;
+	fadt->pm_tmr_blk   = pm_base+0x08;
+	fadt->gpe0_blk     = pm_base+0x20;
+	fadt->gpe1_blk     = pm_base+0xb0;
+
+	fadt->pm1_evt_len  =  4;
+	fadt->pm1_cnt_len  =  2;
+	fadt->pm2_cnt_len  =  0;
+	fadt->pm_tmr_len   =  4;
+	fadt->gpe0_blk_len =  4;
+	fadt->gpe1_blk_len =  8;
+	fadt->gpe1_base    = 16;
+
+	fadt->cst_cnt    = 0x00;// SMM is not used for p-state control
+//	fadt->cst_cnt    = 0xe3;
+	fadt->p_lvl2_lat =  101;
+	fadt->p_lvl3_lat = 1001;
+	fadt->flush_size = 0;
+	fadt->flush_stride = 0;
+	fadt->duty_offset = 1;
+	fadt->duty_width = 3;
+	fadt->day_alrm = 0; // 0x7d these have to be
+	fadt->mon_alrm = 0; // 0x7e added to cmos.layout
+	fadt->century =  0; // 0x7f to make rtc alrm work
+	fadt->iapc_boot_arch = 0x3; // See table 5-11
+	fadt->flags = 0x25;
+
+	fadt->res2 = 0;
+
+	fadt->reset_reg.space_id = 1;
+	fadt->reset_reg.bit_width = 8;
+	fadt->reset_reg.bit_offset = 0;
+	fadt->reset_reg.resv = 0;
+	fadt->reset_reg.addrl = 0xcf9;
+	fadt->reset_reg.addrh = 0x0;
+
+	fadt->reset_value = 6;
+	fadt->x_firmware_ctl_l = (u32)facs;
+	fadt->x_firmware_ctl_h = 0;
+	fadt->x_dsdt_l = (u32)dsdt;
+	fadt->x_dsdt_h = 0;
+
+	fadt->x_pm1a_evt_blk.space_id = 1;
+	fadt->x_pm1a_evt_blk.bit_width = 32;
+	fadt->x_pm1a_evt_blk.bit_offset = 0;
+	fadt->x_pm1a_evt_blk.resv = 0;
+	fadt->x_pm1a_evt_blk.addrl = pm_base;
+	fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_evt_blk.space_id = 1;
+	fadt->x_pm1b_evt_blk.bit_width = 4;
+	fadt->x_pm1b_evt_blk.bit_offset = 0;
+	fadt->x_pm1b_evt_blk.resv = 0;
+	fadt->x_pm1b_evt_blk.addrl = 0x0;
+	fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+
+	fadt->x_pm1a_cnt_blk.space_id = 1;
+	fadt->x_pm1a_cnt_blk.bit_width = 16;
+	fadt->x_pm1a_cnt_blk.bit_offset = 0;
+	fadt->x_pm1a_cnt_blk.resv = 0;
+	fadt->x_pm1a_cnt_blk.addrl = pm_base+4;
+	fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_cnt_blk.space_id = 1;
+	fadt->x_pm1b_cnt_blk.bit_width = 2;
+	fadt->x_pm1b_cnt_blk.bit_offset = 0;
+	fadt->x_pm1b_cnt_blk.resv = 0;
+	fadt->x_pm1b_cnt_blk.addrl = 0x0;
+	fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+
+	fadt->x_pm2_cnt_blk.space_id = 1;
+	fadt->x_pm2_cnt_blk.bit_width = 0;
+	fadt->x_pm2_cnt_blk.bit_offset = 0;
+	fadt->x_pm2_cnt_blk.resv = 0;
+	fadt->x_pm2_cnt_blk.addrl = 0x0;
+	fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+
+	fadt->x_pm_tmr_blk.space_id = 1;
+	fadt->x_pm_tmr_blk.bit_width = 32;
+	fadt->x_pm_tmr_blk.bit_offset = 0;
+	fadt->x_pm_tmr_blk.resv = 0;
+	fadt->x_pm_tmr_blk.addrl = pm_base+0x08;
+	fadt->x_pm_tmr_blk.addrh = 0x0;
+
+
+	fadt->x_gpe0_blk.space_id = 1;
+	fadt->x_gpe0_blk.bit_width = 32;
+	fadt->x_gpe0_blk.bit_offset = 0;
+	fadt->x_gpe0_blk.resv = 0;
+	fadt->x_gpe0_blk.addrl = pm_base+0x20;
+	fadt->x_gpe0_blk.addrh = 0x0;
+
+
+	fadt->x_gpe1_blk.space_id = 1;
+	fadt->x_gpe1_blk.bit_width = 64;
+	fadt->x_gpe1_blk.bit_offset = 16;
+	fadt->x_gpe1_blk.resv = 0;
+	fadt->x_gpe1_blk.addrl = pm_base+0xb0;
+	fadt->x_gpe1_blk.addrh = 0x0;
+
+	header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+
+}
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/get_bus_conf.c	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,229 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/dualcore.h>
+#endif
+
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include "mb_sysconf.h"
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables */
+struct mb_sysconf_t mb_sysconf;
+
+/* Here you only need to set value in pci1234 for HT-IO that could be
+installed or not You may need to preset pci1234 for HTIO board, please
+refer to src/northbridge/amd/amdfam10/get_sblk_pci1234.c for detail */
+static u32 pci1234x[] = {
+	0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+	0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+	0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+	0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+	0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
+	0x0000ffc, 0x0000ffc,
+	};
+
+
+/* HT Chain device num, actually it is unit id base of every ht device
+in chain, assume every chain only have 4 ht device at most */
+
+static unsigned hcdnx[] = {
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
+	0x20202020, 0x20202020,
+};
+
+
+
+extern void get_pci1234(void);
+
+static u32 get_bus_conf_done = 0;
+
+static u32 get_hcid(u32 i)
+{
+	u32 id = 0;
+	u32 busn = (sysconf.pci1234[i] >> 12) & 0xff;
+	u32 devn = sysconf.hcdn[i] & 0xff;
+	device_t dev;
+
+	dev = dev_find_slot(busn, PCI_DEVFN(devn,0));
+
+	switch (dev->device) {
+	case 0x7458: //8132
+		id = 1;
+		break;
+	case 0x7454: //8151
+		id = 2;
+		break;
+	case 0x7450: //8131
+		id = 3;
+		break;
+	}
+	// we may need more way to find out hcid: subsystem id? GPIO read ?
+	// we need use id for 1. bus num, 2. mptable, 3. acpi table
+	return id;
+}
+
+void get_bus_conf(void)
+{
+	u32 apicid_base;
+
+	device_t dev;
+	int i, j;
+	struct mb_sysconf_t *m;
+
+	if(get_bus_conf_done == 1)
+		return; //do it only once
+
+	get_bus_conf_done = 1;
+
+	sysconf.mb = &mb_sysconf;
+
+	m = sysconf.mb;
+
+	for(i=0;i<256; i++) {
+		m->bus_type[i] = 0;
+	}
+
+	sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
+	for(i=0;i<sysconf.hc_possible_num; i++) {
+		sysconf.pci1234[i] = pci1234x[i];
+		sysconf.hcdn[i] = hcdnx[i];
+	}
+
+	get_pci1234();
+
+	m->bus_type[0] = 1; //pci
+
+	sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
+	m->sbdn3 = sysconf.hcdn[0] & 0xff;
+
+	m->bus_8132_0 = (sysconf.pci1234[0] >> 12) & 0xff;
+	m->bus_8111_0 = m->bus_8132_0;
+
+	/* 8111 */
+	dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn,0));
+	if (dev) {
+		m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+	} else {
+		printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn);
+	}
+
+	/* 8132-1 */
+	dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3,0));
+	if (dev) {
+		m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+	} else {
+		printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3);
+	}
+
+	/* 8132-2 */
+	dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1,0));
+	if (dev) {
+		m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+	} else {
+		printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1);
+	}
+
+	for(i=0; i< sysconf.hc_possible_num; i++) {
+		if(!(sysconf.pci1234[i] & 0x1) ) continue;
+
+		u32 busn = (sysconf.pci1234[i] >> 12) & 0xff;
+		u32 busn_max = (sysconf.pci1234[i] >> 20) & 0xff;
+		for (j = busn; j <= busn_max; j++)
+			m->bus_type[j] = 1;
+		if(m->bus_isa <= busn_max)
+			m->bus_isa = busn_max + 1;
+		printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
+	}
+
+	 /* HT chain 1 */
+	j=0;
+	for(i=1; i< sysconf.hc_possible_num; i++) {
+		if(!(sysconf.pci1234[i] & 0x1) ) continue;
+
+		// check hcid type here
+		sysconf.hcid[i] = get_hcid(i);
+
+		switch(sysconf.hcid[i]) {
+
+		case 1:	//8132
+		case 3: //8131
+
+			m->bus_8132a[j][0] = (sysconf.pci1234[i] >> 12) & 0xff;
+
+			m->sbdn3a[j] = sysconf.hcdn[i] & 0xff;
+
+			/* 8132-1 */
+			dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j],0));
+			if (dev) {
+				m->bus_8132a[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			} else {
+				printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]);
+			}
+
+			/* 8132-2 */
+			dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1,0));
+			if (dev) {
+				m->bus_8132a[j][2] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			} else {
+				printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]+1);
+			}
+
+			break;
+
+		case 2: //8151
+
+			m->bus_8151[j][0] = (sysconf.pci1234[i] >> 12) & 0xff;
+			m->sbdn5[j] = sysconf.hcdn[i] & 0xff;
+			/* 8151 */
+			dev = dev_find_slot(m->bus_8151[j][0], PCI_DEVFN(m->sbdn5[j]+1, 0));
+
+			if (dev) {
+				m->bus_8151[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			} else {
+				printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151[j][0], m->sbdn5[j]+1);
+			}
+
+			break;
+		}
+
+		j++;
+	 }
+
+/*I/O APICs:	APIC ID	Version	State		Address*/
+	apicid_base = 0;
+	m->apicid_8111 = apicid_base + 0;
+	m->apicid_8132_1 = apicid_base + 1;
+	m->apicid_8132_2 = apicid_base + 2;
+	for(i=0;i<j;i++) {
+		m->apicid_8132a[i][0] = apicid_base + 3 + i * 2;
+		m->apicid_8132a[i][1] = apicid_base + 3 + i * 2 + 1;
+	}
+}
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/irq_tables.c	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,144 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include "mb_sysconf.h"
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, u8 link0, u16 bitmap0,
+		u8 link1, u16 bitmap1, u8 link2, u16 bitmap2,u8 link3, u16 bitmap3,
+		u8 slot, u8 rfu)
+{
+	pirq_info->bus = bus;
+	pirq_info->devfn = devfn;
+		pirq_info->irq[0].link = link0;
+		pirq_info->irq[0].bitmap = bitmap0;
+		pirq_info->irq[1].link = link1;
+		pirq_info->irq[1].bitmap = bitmap1;
+		pirq_info->irq[2].link = link2;
+		pirq_info->irq[2].bitmap = bitmap2;
+		pirq_info->irq[3].link = link3;
+		pirq_info->irq[3].bitmap = bitmap3;
+	pirq_info->slot = slot;
+	pirq_info->rfu = rfu;
+}
+
+
+extern void get_bus_conf(void);
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+
+	struct irq_routing_table *pirq;
+	struct irq_info *pirq_info;
+	u32 slot_num;
+	u8 *v;
+
+	u8 sum=0;
+	int i;
+
+	struct mb_sysconf_t *m;
+
+	get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+
+	m = sysconf.mb;
+
+	/* Align the table to be 16 byte aligned. */
+	addr += 15;
+	addr &= ~15;
+
+	/* This table must be betweeen 0xf0000 & 0x100000 */
+	printk_info("Writing IRQ routing tables to 0x%x...", addr);
+
+	pirq = (void *)(addr);
+	v = (u8 *)(addr);
+
+	pirq->signature = PIRQ_SIGNATURE;
+	pirq->version  = PIRQ_VERSION;
+
+	pirq->rtr_bus = m->bus_8111_0;
+	pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0;
+
+	pirq->exclusive_irqs = 0;
+
+	pirq->rtr_vendor = 0x1022;
+	pirq->rtr_device = 0x746b;
+
+	pirq->miniport_data = 0;
+
+	memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+	pirq_info = (void *) ( &pirq->checksum + 1);
+	slot_num = 0;
+
+
+	//pci bridge
+	write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+	pirq_info++; slot_num++;
+
+
+	//pcix bridge
+//	write_pirq_info(pirq_info, m->bus_8132_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+//	pirq_info++; slot_num++;
+
+	int j=0;
+
+	for(i=1; i< sysconf.hc_possible_num; i++) {
+		if(!(sysconf.pci1234[i] & 0x1) ) continue;
+		u32 busn = (sysconf.pci1234[i] >> 12) & 0xff;
+		u32 devn = sysconf.hcdn[i] & 0xff;
+
+		write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+			pirq_info++; slot_num++;
+		j++;
+
+	}
+
+#if CBB
+	write_pirq_info(pirq_info, CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+	pirq_info++; slot_num++;
+	if(sysconf.nodes>32) {
+		write_pirq_info(pirq_info, CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+		pirq_info++; slot_num++;
+	}
+#endif
+
+	pirq->size = 32 + 16 * slot_num;
+
+	for (i = 0; i < pirq->size; i++) {
+		sum += v[i];
+	}
+
+	sum = pirq->checksum - sum;
+
+	if (sum != pirq->checksum) {
+		pirq->checksum = sum;
+	}
+
+	printk_info("done.\n");
+
+	return	(unsigned long) pirq_info;
+
+}
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mainboard.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mainboard.c	2007-12-12 16:38:08.000000000 -0700
@@ -0,0 +1,32 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "chip.h"
+
+#if CONFIG_CHIP_NAME == 1
+struct chip_operations mainboard_amd_serengeti_cheetah_fam10_ops = {
+	CHIP_NAME("AMD family 10 Cheetah mainboard")
+};
+#endif
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mb_sysconf.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mb_sysconf.h	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,45 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef MB_SYSCONF_H
+
+#define MB_SYSCONF_H
+
+struct mb_sysconf_t {
+	u8 bus_isa;
+	u8 bus_8132_0;
+	u8 bus_8132_1;
+	u8 bus_8132_2;
+	u8 bus_8111_0;
+	u8 bus_8111_1;
+	u8 bus_8132a[31][3];
+	u8 bus_8151[31][2];
+
+	u32 apicid_8111;
+	u32 apicid_8132_1;
+	u32 apicid_8132_2;
+	u32 apicid_8132a[31][2];
+	u32 sbdn3;
+	u32 sbdn3a[31];
+	u32 sbdn5[31];
+ 	u32 bus_type[256];
+};
+
+#endif
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,237 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/dualcore.h>
+#endif
+
+#include <cpu/amd/amdfam10_sysconf.h>
+#include "mb_sysconf.h"
+
+extern void get_bus_conf(void);
+
+void *smp_write_config_table(void *v)
+{
+	static const char sig[4] = "PCMP";
+	static const char oem[8] = "AMD     ";
+	static const char productid[12] = "SERENGETI	";
+	struct mp_config_table *mc;
+
+	int i;
+	int j;
+	struct mb_sysconf_t *m;
+
+	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+	memset(mc, 0, sizeof(*mc));
+
+	memcpy(mc->mpc_signature, sig, sizeof(sig));
+	mc->mpc_length = sizeof(*mc); /* initially just the header */
+	mc->mpc_spec = 0x04;
+	mc->mpc_checksum = 0; /* not yet computed */
+	memcpy(mc->mpc_oem, oem, sizeof(oem));
+	memcpy(mc->mpc_productid, productid, sizeof(productid));
+	mc->mpc_oemptr = 0;
+	mc->mpc_oemsize = 0;
+	mc->mpc_entry_count = 0; /* No entries yet... */
+	mc->mpc_lapic = LAPIC_ADDR;
+	mc->mpe_length = 0;
+	mc->mpe_checksum = 0;
+	mc->reserved = 0;
+
+	smp_write_processors(mc);
+
+	get_bus_conf();
+
+	m = sysconf.mb;
+
+	/*Bus:	Bus ID	Type*/
+	/* define bus and isa numbers */
+	for(j= 0; j < 256 ; j++) {
+		if(m->bus_type[j])
+			smp_write_bus(mc, j, "PCI   ");
+	}
+	smp_write_bus(mc, m->bus_isa, "ISA   ");
+
+	/*I/O APICs:	APIC ID	Version	State	Address*/
+	smp_write_ioapic(mc, m->apicid_8111, 0x11, 0xfec00000); //8111
+	{
+		device_t dev;
+		struct resource *res;
+		dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3, 1));
+		if (dev) {
+			res = find_resource(dev, PCI_BASE_ADDRESS_0);
+			if (res) {
+				smp_write_ioapic(mc, m->apicid_8132_1, 0x11, res->base);
+			}
+		}
+		dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1, 1));
+		if (dev) {
+			res = find_resource(dev, PCI_BASE_ADDRESS_0);
+			if (res) {
+				smp_write_ioapic(mc, m->apicid_8132_2, 0x11, res->base);
+			}
+		}
+
+		j = 0;
+
+		for(i=1; i< sysconf.hc_possible_num; i++) {
+			if(!(sysconf.pci1234[i] & 0x1) ) continue;
+
+			switch(sysconf.hcid[i]) {
+			case 1:
+			case 3:
+				dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1));
+				if (dev) {
+					res = find_resource(dev, PCI_BASE_ADDRESS_0);
+					if (res) {
+						smp_write_ioapic(mc, m->apicid_8132a[j][0], 0x11, res->base);
+					}
+				}
+				dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1));
+				if (dev) {
+					res = find_resource(dev, PCI_BASE_ADDRESS_0);
+					if (res) {
+						smp_write_ioapic(mc, m->apicid_8132a[j][1], 0x11, res->base);
+					}
+				}
+				break;
+			}
+			j++;
+		}
+
+	}
+
+	/* I/O Ints:	Type	Polarity	Trigger		Bus ID		IRQ	APIC ID	PIN#*/
+	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_8111, 0x0);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0x1, m->apicid_8111, 0x1);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0x0, m->apicid_8111, 0x2);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0x3, m->apicid_8111, 0x3);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0x4, m->apicid_8111, 0x4);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0x5, m->apicid_8111, 0x5);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0x6, m->apicid_8111, 0x6);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0x7, m->apicid_8111, 0x7);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0x8, m->apicid_8111, 0x8);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0x9, m->apicid_8111, 0x9);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0xc, m->apicid_8111, 0xc);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0xd, m->apicid_8111, 0xd);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0xe, m->apicid_8111, 0xe);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,	m->bus_isa, 0xf, m->apicid_8111, 0xf);
+//??? What
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ((sysconf.sbdn+1)<<2)|3, m->apicid_8111, 0x13);
+
+	// Onboard AMD USB
+	 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (0<<2)|3, m->apicid_8111, 0x13);
+
+	//Slot 3  PCI 32
+	for(i=0;i<4;i++) {
+		smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (5<<2)|i, m->apicid_8111, 0x10 + (1+i)%4); //16
+	}
+
+
+	// Slot 4 PCI 32
+	for(i=0;i<4;i++) {
+		smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, (4<<2)|i, m->apicid_8111, 0x10 + (0+i)%4); //16
+	}
+
+
+	// Slot 1 PCI-X 133/100/66
+	for(i=0;i<4;i++) {
+		smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, (1<<2)|i, m->apicid_8132_2, (0+i)%4); //
+	}
+
+
+	//Slot 2 PCI-X 133/100/66
+	for(i=0;i<4;i++) {
+		smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_1, (1<<2)|i, m->apicid_8132_1, (1+i)%4); //25
+	}
+
+	j = 0;
+
+	for(i=1; i< sysconf.hc_possible_num; i++) {
+		if(!(sysconf.pci1234[i] & 0x1) ) continue;
+		int ii;
+		int jj;
+		device_t dev;
+		struct resource *res;
+		switch(sysconf.hcid[i]) {
+		case 1:
+		case 3:
+			dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1));
+			if (dev) {
+				res = find_resource(dev, PCI_BASE_ADDRESS_0);
+				if (res) {
+					for(jj=0; jj<4; jj++) {
+						//Slot 1 PCI-X 133/100/66
+						for(ii=0;ii<4;ii++) {
+							smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132a[j][1], (jj<<2)|ii, m->apicid_8132a[j][0], (jj+ii)%4); //
+						}
+					}
+				}
+			}
+
+			dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1));
+			if (dev) {
+				res = find_resource(dev, PCI_BASE_ADDRESS_0);
+				if (res) {
+					for(jj=0; jj<4; jj++) {
+						//Slot 2 PCI-X 133/100/66
+						for(ii=0;ii<4;ii++) {
+							smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132a[j][2], (jj<<2)|ii, m->apicid_8132a[j][1], (jj+ii)%4); //25
+						}
+					}
+				}
+			}
+
+			break;
+		case 2:
+
+		//  Slot AGP
+			smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8151[j][1], 0x0, m->apicid_8111, 0x11);
+			break;
+		}
+
+		j++;
+	 }
+
+
+
+	/* Local Ints:	Type	Polarity	Trigger		Bus ID		IRQ	APIC ID	PIN#*/
+	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0);
+	smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1);
+	/* There is no extension information... */
+
+	/* Compute the checksums */
+	mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+	mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+	printk_debug("Wrote the mp table end at: %p - %p\n",
+		mc, smp_next_mpe_entry(mc));
+	return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr);
+	return (unsigned long)smp_write_config_table(v);
+}
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/resourcemap.c	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,281 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+
+static void setup_mb_resource_map(void)
+{
+	static const unsigned int register_values[] = {
+		/* Careful set limit registers before base registers which contain the enables */
+		/* DRAM Limit i Registers
+		 * F1:0x44 i = 0
+		 * F1:0x4C i = 1
+		 * F1:0x54 i = 2
+		 * F1:0x5C i = 3
+		 * F1:0x64 i = 4
+		 * F1:0x6C i = 5
+		 * F1:0x74 i = 6
+		 * F1:0x7C i = 7
+		 * [ 2: 0] Destination Node ID
+		 *	   000 = Node 0
+		 *	   001 = Node 1
+		 *	   010 = Node 2
+		 *	   011 = Node 3
+		 *	   100 = Node 4
+		 *	   101 = Node 5
+		 *	   110 = Node 6
+		 *	   111 = Node 7
+		 * [ 7: 3] Reserved
+		 * [10: 8] Interleave select
+		 *	   specifies the values of A[14:12] to use with interleave enable.
+		 * [15:11] Reserved
+		 * [31:16] DRAM Limit Address i Bits 39-24
+		 *	   This field defines the upper address bits of a 40 bit  address
+		 *	   that define the end of the DRAM region.
+		 */
+//		PCI_ADDR(CBB, CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR_FAM10
+		PCI_ADDR(CBB, CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
+		PCI_ADDR(CBB, CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
+		PCI_ADDR(CBB, CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
+		PCI_ADDR(CBB, CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
+		PCI_ADDR(CBB, CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
+		PCI_ADDR(CBB, CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
+		PCI_ADDR(CBB, CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
+		/* DRAM Base i Registers
+		 * F1:0x40 i = 0
+		 * F1:0x48 i = 1
+		 * F1:0x50 i = 2
+		 * F1:0x58 i = 3
+		 * F1:0x60 i = 4
+		 * F1:0x68 i = 5
+		 * F1:0x70 i = 6
+		 * F1:0x78 i = 7
+		 * [ 0: 0] Read Enable
+		 *	   0 = Reads Disabled
+		 *	   1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *	   0 = Writes Disabled
+		 *	   1 = Writes Enabled
+		 * [ 7: 2] Reserved
+		 * [10: 8] Interleave Enable
+		 *	   000 = No interleave
+		 *	   001 = Interleave on A[12] (2 nodes)
+		 *	   010 = reserved
+		 *	   011 = Interleave on A[12] and A[14] (4 nodes)
+		 *	   100 = reserved
+		 *	   101 = reserved
+		 *	   110 = reserved
+		 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+		 * [15:11] Reserved
+		 * [13:16] DRAM Base Address i Bits 39-24
+		 *	   This field defines the upper address bits of a 40-bit address
+		 *	   that define the start of the DRAM region.
+		 */
+//		PCI_ADDR(CBB, CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CAR_FAM10
+		PCI_ADDR(CBB, CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+		/* Memory-Mapped I/O Limit i Registers
+		 * F1:0x84 i = 0
+		 * F1:0x8C i = 1
+		 * F1:0x94 i = 2
+		 * F1:0x9C i = 3
+		 * F1:0xA4 i = 4
+		 * F1:0xAC i = 5
+		 * F1:0xB4 i = 6
+		 * F1:0xBC i = 7
+		 * [ 2: 0] Destination Node ID
+		 *	   000 = Node 0
+		 *	   001 = Node 1
+		 *	   010 = Node 2
+		 *	   011 = Node 3
+		 *	   100 = Node 4
+		 *	   101 = Node 5
+		 *	   110 = Node 6
+		 *	   111 = Node 7
+		 * [ 3: 3] Reserved
+		 * [ 5: 4] Destination Link ID
+		 *	   00 = Link 0
+		 *	   01 = Link 1
+		 *	   10 = Link 2
+		 *	   11 = Reserved
+		 * [ 6: 6] Reserved
+		 * [ 7: 7] Non-Posted
+		 *	   0 = CPU writes may be posted
+		 *	   1 = CPU writes must be non-posted
+		 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+		 *	   This field defines the upp adddress bits of a 40-bit address that
+		 *	   defines the end of a memory-mapped I/O region n
+		 */
+		PCI_ADDR(CBB, CDB, 1, 0x84), 0x00000048, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x8C), 0x00000048, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x94), 0x00000048, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x9C), 0x00000048, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xA4), 0x00000048, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xAC), 0x00000048, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xB4), 0x00000048, 0x00000000,
+//		PCI_ADDR(CBB, CDB, 1, 0xBC), 0x00000048, 0x00ffff00,
+
+		/* Memory-Mapped I/O Base i Registers
+		 * F1:0x80 i = 0
+		 * F1:0x88 i = 1
+		 * F1:0x90 i = 2
+		 * F1:0x98 i = 3
+		 * F1:0xA0 i = 4
+		 * F1:0xA8 i = 5
+		 * F1:0xB0 i = 6
+		 * F1:0xB8 i = 7
+		 * [ 0: 0] Read Enable
+		 *	   0 = Reads disabled
+		 *	   1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *	   0 = Writes disabled
+		 *	   1 = Writes Enabled
+		 * [ 2: 2] Cpu Disable
+		 *	   0 = Cpu can use this I/O range
+		 *	   1 = Cpu requests do not use this I/O range
+		 * [ 3: 3] Lock
+		 *	   0 = base/limit registers i are read/write
+		 *	   1 = base/limit registers i are read-only
+		 * [ 7: 4] Reserved
+		 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+		 *	   This field defines the upper address bits of a 40bit address
+		 *	   that defines the start of memory-mapped I/O region i
+		 */
+		PCI_ADDR(CBB, CDB, 1, 0x80), 0x000000f0, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x88), 0x000000f0, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x90), 0x000000f0, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0x98), 0x000000f0, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xA0), 0x000000f0, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xA8), 0x000000f0, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xB0), 0x000000f0, 0x00000000,
+//		PCI_ADDR(CBB, CDB, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+		/* PCI I/O Limit i Registers
+		 * F1:0xC4 i = 0
+		 * F1:0xCC i = 1
+		 * F1:0xD4 i = 2
+		 * F1:0xDC i = 3
+		 * [ 2: 0] Destination Node ID
+		 *	   000 = Node 0
+		 *	   001 = Node 1
+		 *	   010 = Node 2
+		 *	   011 = Node 3
+		 *	   100 = Node 4
+		 *	   101 = Node 5
+		 *	   110 = Node 6
+		 *	   111 = Node 7
+		 * [ 3: 3] Reserved
+		 * [ 5: 4] Destination Link ID
+		 *	   00 = Link 0
+		 *	   01 = Link 1
+		 *	   10 = Link 2
+		 *	   11 = reserved
+		 * [11: 6] Reserved
+		 * [24:12] PCI I/O Limit Address i
+		 *	   This field defines the end of PCI I/O region n
+		 * [31:25] Reserved
+		 */
+//		PCI_ADDR(CBB, CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+		PCI_ADDR(CBB, CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+		/* PCI I/O Base i Registers
+		 * F1:0xC0 i = 0
+		 * F1:0xC8 i = 1
+		 * F1:0xD0 i = 2
+		 * F1:0xD8 i = 3
+		 * [ 0: 0] Read Enable
+		 *	   0 = Reads Disabled
+		 *	   1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *	   0 = Writes Disabled
+		 *	   1 = Writes Enabled
+		 * [ 3: 2] Reserved
+		 * [ 4: 4] VGA Enable
+		 *	   0 = VGA matches Disabled
+		 *	   1 = matches all address < 64K and where A[9:0] is in the
+		 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+		 * [ 5: 5] ISA Enable
+		 *	   0 = ISA matches Disabled
+		 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+		 *	       from matching agains this base/limit pair
+		 * [11: 6] Reserved
+		 * [24:12] PCI I/O Base i
+		 *	   This field defines the start of PCI I/O region n
+		 * [31:25] Reserved
+		 */
+//		PCI_ADDR(CBB, CDB, 1, 0xC0), 0xFE000FCC, 0x00000003,
+		PCI_ADDR(CBB, CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+		/* Config Base and Limit i Registers
+		 * F1:0xE0 i = 0
+		 * F1:0xE4 i = 1
+		 * F1:0xE8 i = 2
+		 * F1:0xEC i = 3
+		 * [ 0: 0] Read Enable
+		 *	   0 = Reads Disabled
+		 *	   1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *	   0 = Writes Disabled
+		 *	   1 = Writes Enabled
+		 * [ 2: 2] Device Number Compare Enable
+		 *	   0 = The ranges are based on bus number
+		 *	   1 = The ranges are ranges of devices on bus 0
+		 * [ 3: 3] Reserved
+		 * [ 6: 4] Destination Node
+		 *	   000 = Node 0
+		 *	   001 = Node 1
+		 *	   010 = Node 2
+		 *	   011 = Node 3
+		 *	   100 = Node 4
+		 *	   101 = Node 5
+		 *	   110 = Node 6
+		 *	   111 = Node 7
+		 * [ 7: 7] Reserved
+		 * [ 9: 8] Destination Link
+		 *	   00 = Link 0
+		 *	   01 = Link 1
+		 *	   10 = Link 2
+		 *	   11 - Reserved
+		 * [15:10] Reserved
+		 * [23:16] Bus Number Base i
+		 *	   This field defines the lowest bus number in configuration region i
+		 * [31:24] Bus Number Limit i
+		 *	   This field defines the highest bus number in configuration regin i
+		 */
+//		PCI_ADDR(CBB, CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0
+		PCI_ADDR(CBB, CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
+		PCI_ADDR(CBB, CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
+	};
+
+	int max;
+	max = sizeof(register_values)/sizeof(register_values[0]);
+	setup_resource_map(register_values, max);
+}
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/spd_addr.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/spd_addr.h	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,194 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/**
+ * This file defines the SPD addresses for the mainboard. Must be included in
+ * cache_as_ram_auto.c
+ */
+
+#define RC00 0
+#define RC01 1
+#define RC02 2
+#define RC03 3
+#define RC04 4
+#define RC05 5
+#define RC06 6
+#define RC07 7
+#define RC08 8
+#define RC09 9
+#define RC10 10
+#define RC11 11
+#define RC12 12
+#define RC13 13
+#define RC14 14
+#define RC15 15
+#define RC16 16
+#define RC17 17
+#define RC18 18
+#define RC19 19
+#define RC20 20
+#define RC21 21
+#define RC22 22
+#define RC23 23
+#define RC24 24
+#define RC25 25
+#define RC26 26
+#define RC27 27
+#define RC28 28
+#define RC29 29
+#define RC30 30
+#define RC31 31
+
+#define RC32 32
+#define RC33 33
+#define RC34 34
+#define RC35 35
+#define RC36 36
+#define RC37 37
+#define RC38 38
+#define RC39 39
+#define RC40 40
+#define RC41 41
+#define RC42 42
+#define RC43 43
+#define RC44 44
+#define RC45 45
+#define RC46 46
+#define RC47 47
+#define RC48 48
+#define RC49 49
+#define RC50 50
+#define RC51 51
+#define RC52 52
+#define RC53 53
+#define RC54 54
+#define RC55 55
+#define RC56 56
+#define RC57 57
+#define RC58 58
+#define RC59 59
+#define RC60 60
+#define RC61 61
+#define RC62 62
+#define RC63 63
+
+
+#define DIMM0 0x50
+#define DIMM1 0x51
+#define DIMM2 0x52
+#define DIMM3 0x53
+#define DIMM4 0x54
+#define DIMM5 0x55
+#define DIMM6 0x56
+#define DIMM7 0x57
+
+
+static const u8 spd_addr[] = {
+	//first node
+	RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+	//second node
+	RC01, DIMM0, DIMM2, DIMM4, DIMM6, DIMM1, DIMM3, DIMM5, DIMM7,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 2
+	// third node
+	RC02, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	// forth node
+	RC03, DIMM0, DIMM2, DIMM4, DIMM6, DIMM1, DIMM3, DIMM5, DIMM7,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 4
+	RC04, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC05, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 6
+	RC06, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC07, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 8
+	RC08, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC09, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC10, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC11, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 12
+	RC12, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC13, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC14, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC15, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 16
+	RC16, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC17, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC18, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC19, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 20
+	RC20, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC21, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC22, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC23, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 24
+	RC24, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC25, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC26, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC27, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC28, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC29, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC30, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC31, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 32
+	RC32, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC33, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC34, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC35, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC36, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC37, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC38, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC39, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC40, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC41, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC42, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC43, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC44, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC45, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC46, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC47, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+#if CONFIG_MAX_PHYSICAL_CPUS > 48
+	RC48, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC49, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC50, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC51, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC52, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC53, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC54, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC55, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC56, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC57, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC58, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC59, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC60, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC61, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC62, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+	RC63, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
+#endif
+};
+
Index: LinuxBIOSv2/targets/amd/serengeti_cheetah_fam10/Config.lb
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/targets/amd/serengeti_cheetah_fam10/Config.lb	2007-12-12 16:38:38.000000000 -0700
@@ -0,0 +1,67 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+# Sample config file for
+# the amd cheetah_fam10
+# This will make a target directory of ./serengeti_cheetah_fam10
+
+target serengeti_cheetah_fam10
+mainboard amd/serengeti_cheetah_fam10
+# Request this level of debugging output
+	option  DEFAULT_CONSOLE_LOGLEVEL=11
+# At a maximum only compile in this level of debugging
+	option  MAXIMUM_CONSOLE_LOGLEVEL=11
+
+# Cheetah Family 10
+#romimage "normal"
+#	1MB ROM
+#	option ROM_SIZE = 0x100000
+#	option USE_FAILOVER_IMAGE=0
+#	option USE_FALLBACK_IMAGE=0
+#	option ROM_IMAGE_SIZE=0x20000
+#	option ROM_IMAGE_SIZE=0x30000
+#	option XIP_ROM_SIZE=0x40000
+#	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+#	payload ../payload.elf
+#end
+
+romimage "fallback"
+	option USE_FAILOVER_IMAGE=0
+	option USE_FALLBACK_IMAGE=1
+#	option ROM_IMAGE_SIZE=0x13800
+#	option ROM_IMAGE_SIZE=0x19800
+	option ROM_IMAGE_SIZE=0x3f000
+#	option ROM_IMAGE_SIZE=0x15800
+	option XIP_ROM_SIZE=0x40000
+	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+	payload ../payload.elf
+end
+
+romimage "failover"
+	option USE_FAILOVER_IMAGE=1
+	option USE_FALLBACK_IMAGE=0
+	option ROM_IMAGE_SIZE=FAILOVER_SIZE
+	option XIP_ROM_SIZE=FAILOVER_SIZE
+	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover"
+end
+
+#buildrom ./amd-cheetah-fam10.rom ROM_SIZE "normal" "fallback" "failover"
+buildrom ./amd-cheetah-fam10.rom ROM_SIZE "fallback" "failover"
+
Index: LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amdfam10_util.asl
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ LinuxBIOSv2/src/mainboard/amd/serengeti_cheetah_fam10/dx/amdfam10_util.asl	2007-12-12 14:30:02.000000000 -0700
@@ -0,0 +1,329 @@
+//
+// This file is part of the LinuxBIOS project.
+//
+// Copyright (C) 2007 Advanced Micro Devices, Inc.
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; version 2 of the License.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+//
+
+//AMD FAM10 util for BUSB and res range
+
+Scope (\_SB)
+{
+
+	Name (OSTB, Ones)
+	Method (OSTP, 0, NotSerialized)
+	{
+		If (LEqual (^OSTB, Ones))
+		{
+			Store (0x00, ^OSTB)
+		}
+
+		Return (^OSTB)
+	}
+
+	Method (SEQL, 2, Serialized)
+	{
+		Store (SizeOf (Arg0), Local0)
+		Store (SizeOf (Arg1), Local1)
+		If (LNot (LEqual (Local0, Local1))) { Return (Zero) }
+
+		Name (BUF0, Buffer (Local0) {})
+		Store (Arg0, BUF0)
+		Name (BUF1, Buffer (Local0) {})
+		Store (Arg1, BUF1)
+		Store (Zero, Local2)
+		While (LLess (Local2, Local0))
+		{
+			Store (DerefOf (Index (BUF0, Local2)), Local3)
+			Store (DerefOf (Index (BUF1, Local2)), Local4)
+			If (LNot (LEqual (Local3, Local4))) { Return (Zero) }
+
+		Increment (Local2)
+		}
+
+		Return (One)
+	}
+
+
+	Method (DADD, 2, NotSerialized)
+	{
+		Store( Arg1, Local0)
+		Store( Arg0, Local1)
+		Add( ShiftLeft(Local1,16), Local0, Local0)
+		Return (Local0)
+	}
+
+
+	Method (GHCE, 1, NotSerialized) // check if the HC enabled
+	{
+		Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1)
+		if(LEqual ( And(Local1, 0x01), 0x01)) { Return (0x0F) }
+		Else { Return (0x00) }
+	}
+
+	Method (GHCN, 1, NotSerialized) // get the node num for the HC
+	{
+		Store (0x00, Local0)
+		Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1)
+		Store (ShiftRight( And (Local1, 0xfc), 0x02), Local0)
+		Return (Local0)
+	}
+
+	Method (GHCL, 1, NotSerialized) // get the link num on node for the HC
+	{
+		Store (0x00, Local0)
+		Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1)
+		Store (ShiftRight( And (Local1, 0x700), 0x08), Local0)
+		Return (Local0)
+	}
+
+	Method (GHCD, 2, NotSerialized) // get the unit id base for the HT device in HC
+	{
+		Store (0x00, Local0)
+		Store (DerefOf (Index (\_SB.PCI0.HCDN, Arg0)), Local1)
+		Store (Arg1, Local2) // Arg1 could be 3, 2, 1, 0
+		Multiply (Local2, 0x08, Local2) // change to 24, 16, 8, 0
+		Store (And (ShiftRight( Local1, Local2), 0xff), Local0)
+		Return (Local0)
+	}
+
+	Method (GBUS, 2, NotSerialized)
+	{
+		Store (0x00, Local0)
+		While (LLess (Local0, 0x20)) // 32 ht links
+		{
+			Store (DerefOf (Index (\_SB.PCI0.BUSN, Local0)), Local1)
+			If (LEqual (And (Local1, 0x03), 0x03))
+			{
+				If (LEqual (Arg0, ShiftRight (And (Local1, 0xfc), 0x02)))
+				{
+					If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0700), 0x08))))
+					{
+						Return (ShiftRight (And (Local1, 0x000FF000), 0x0c))
+					}
+				}
+			}
+
+			Increment (Local0)
+		}
+
+		Return (0x00)
+	}
+
+	Method (GWBN, 2, NotSerialized)
+	{
+		Name (BUF0, ResourceTemplate ()
+		{
+			WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+				0x0000, // Address Space Granularity
+				0x0000, // Address Range Minimum
+				0x0000, // Address Range Maximum
+				0x0000, // Address Translation Offset
+				0x0000,,,)
+		})
+		CreateWordField (BUF0, 0x08, BMIN)
+		CreateWordField (BUF0, 0x0A, BMAX)
+		CreateWordField (BUF0, 0x0E, BLEN)
+		Store (0x00, Local0)
+		While (LLess (Local0, 0x20))
+		{
+			Store (DerefOf (Index (\_SB.PCI0.BUSN, Local0)), Local1)
+			If (LEqual (And (Local1, 0x03), 0x03))
+			{
+				If (LEqual (Arg0, ShiftRight (And (Local1, 0xfc), 0x02)))
+				{
+					If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0700), 0x08))))
+					{
+						Store (ShiftRight (And (Local1, 0x000FF000), 0x0c), BMIN)
+						Store (ShiftRight (Local1, 0x14), BMAX)
+						Subtract (BMAX, BMIN, BLEN)
+						Increment (BLEN)
+						Return (RTAG (BUF0))
+					}
+				}
+			}
+
+			Increment (Local0)
+		}
+
+		Return (RTAG (BUF0))
+	}
+
+	Method (GMEM, 2, NotSerialized)
+	{
+		Name (BUF0, ResourceTemplate ()
+		{
+			DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
+				0x00000000, // Address Space Granularity
+				0x00000000, // Address Range Minimum
+				0x00000000, // Address Range Maximum
+				0x00000000, // Address Translation Offset
+				0x00000000,,,
+				, AddressRangeMemory, TypeStatic)
+		})
+		CreateDWordField (BUF0, 0x0A, MMIN)
+		CreateDWordField (BUF0, 0x0E, MMAX)
+		CreateDWordField (BUF0, 0x16, MLEN)
+		Store (0x00, Local0)
+		Store (0x00, Local4)
+		Store (0x00, Local3)
+		While (LLess (Local0, 0x80)) // 0x20 links * 2(mem, prefmem ) *2 ( base, limit )
+		{
+			Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local1)
+			Increment (Local0)
+			Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local2)
+			If (LEqual (And (Local1, 0x03), 0x03))
+			{
+				If (LEqual (Arg0, And (Local2, 0x3f)))
+				{
+					If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x70), 0x04))))
+					{
+						Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN)
+						Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX)
+						Or (MMAX, 0xFFFF, MMAX)
+						Subtract (MMAX, MMIN, MLEN)
+
+						If (Local4)
+						{
+							Concatenate (RTAG (BUF0), Local3, Local5)
+							Store (Local5, Local3)
+						}
+						Else
+						{
+							If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, \_SB.PCI0.SBLK)))
+							{
+								Store (\_SB.PCI0.TOM1, MMIN)
+								Subtract (MMAX, MMIN, MLEN)
+								Increment (MLEN)
+							}
+
+							Store (RTAG (BUF0), Local3)
+						}
+
+						Increment (Local4)
+					}
+				}
+			}
+
+			Increment (Local0)
+		}
+
+		If (LNot (Local4))
+		{
+			Store (BUF0, Local3)
+		}
+
+		Return (Local3)
+	}
+
+	Method (GIOR, 2, NotSerialized)
+	{
+		Name (BUF0, ResourceTemplate ()
+		{
+			DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+				0x00000000, // Address Space Granularity
+				0x00000000, // Address Range Minimum
+				0x00000000, // Address Range Maximum
+				0x00000000, // Address Translation Offset
+				0x00000000,,,
+				, TypeStatic)
+		})
+		CreateDWordField (BUF0, 0x0A, PMIN)
+		CreateDWordField (BUF0, 0x0E, PMAX)
+		CreateDWordField (BUF0, 0x16, PLEN)
+		Store (0x00, Local0)
+		Store (0x00, Local4)
+		Store (0x00, Local3)
+		While (LLess (Local0, 0x40)) // 0x20 ht links  * 2 ( base, limit)
+		{
+			Store (DerefOf (Index (\_SB.PCI0.PCIO, Local0)), Local1)
+			Increment (Local0)
+			Store (DerefOf (Index (\_SB.PCI0.PCIO, Local0)), Local2)
+			If (LEqual (And (Local1, 0x03), 0x03))
+			{
+				If (LEqual (Arg0, And (Local2, 0x3f)))
+				{
+					If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x70), 0x04))))
+					{
+						Store (And (Local1, 0x01FFF000), PMIN)
+						Store (And (Local2, 0x01FFF000), PMAX)
+						Or (PMAX, 0x0FFF, PMAX)
+						Subtract (PMAX, PMIN, PLEN)
+						Increment (PLEN)
+
+						If (Local4)
+						{
+							Concatenate (RTAG (BUF0), Local3, Local5)
+							Store (Local5, Local3)
+						}
+						Else
+						{
+							If (LGreater (PMAX, PMIN))
+							{
+								If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, \_SB.PCI0.SBLK)))
+								{
+									Store (0x0D00, PMIN)
+									Subtract (PMAX, PMIN, PLEN)
+									Increment (PLEN)
+								}
+
+								Store (RTAG (BUF0), Local3)
+								Increment (Local4)
+							}
+
+							If (And (Local1, 0x10))
+							{
+								Store (0x03B0, PMIN)
+								Store (0x03DF, PMAX)
+								Store (0x30, PLEN)
+								If (Local4)
+								{
+									Concatenate (RTAG (BUF0), Local3, Local5)
+									Store (Local5, Local3)
+								}
+								Else
+								{
+									Store (RTAG (BUF0), Local3)
+								}
+							}
+						}
+
+						Increment (Local4)
+					}
+				}
+			}
+
+			Increment (Local0)
+		}
+
+		If (LNot (Local4))
+		{
+			Store (RTAG (BUF0), Local3)
+		}
+
+		Return (Local3)
+	}
+
+	Method (RTAG, 1, NotSerialized)
+	{
+		Store (Arg0, Local0)
+		Store (SizeOf (Local0), Local1)
+		Subtract (Local1, 0x02, Local1)
+		Multiply (Local1, 0x08, Local1)
+		CreateField (Local0, 0x00, Local1, RETB)
+		Store (RETB, Local2)
+		Return (Local2)
+	}
+}
\ No newline at end of file
