Hi,<br><br>I'm new to Coreboot, but I've been able to get a BIOS burned and sort of working. I'm working with a Capio II 320 (see specs below) and I've tried using the "Axus TC320" and "ASI MB-5BLMP" build tutorials since the CPU and chipsets are so similar. I've also tried using Etherboot and FILO as the payloads with the same results. The ASI tutorial starts up and initializes the network interface, but I never get any video. With the Axus TC320 tutorial, I get video, the network interface is initialized, and I get a splash screen, but that's where it stops. When using Etherboot I can see that the Capio starts to boot from my network boot server and then stops. Is there a way I can get console output with the Axus TC320 setup? If I could see what's going on I might be able to fix it.<br>
<br>Any help will be greatly appreciated.<br><br>Boundless (Neoware) Capio II 320<br>Cyrix MediaGXm 233MHz<br>Geode CS5530 companion device<br>Intel 82559ER Network Interface<br>48MB DiskOnChip<br>32MB SDRAM DIMM<br><br>Thanks,<br>
<br>Jeremy<br>