<br>Here are the results :<br><br>00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)<br>00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03)<br>
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)<br>00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)<br>00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02)<br>00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02)<br>
00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)<br>00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)<br>01:02.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)<br>
<br>-------------------------------------------------<br><br>00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)<br> Subsystem: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub<br>
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-<br> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-<br> Latency: 0<br>
<br>00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03) (prog-if 00 [VGA])<br> Subsystem: Hewlett-Packard Company Unknown device 1243<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br>
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 0<br> Interrupt: pin A routed to IRQ 10<br> Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]<br>
Region 1: Memory at eff80000 (32-bit, non-prefetchable) [size=512K]<br> Capabilities: [dc] Power Management version 1<br> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-<br>
<br>00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-<br> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br>
Latency: 0<br> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32<br> I/O behind bridge: 0000b000-0000bfff<br> Memory behind bridge: efd00000-efdfffff<br> Prefetchable memory behind bridge: e7b00000-e7bfffff<br>
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-<br> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-<br><br>00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)<br>
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 0<br>
<br>00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02) (prog-if 80 [Master])<br> Subsystem: Intel Corporation 82801AA IDE Controller<br> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br>
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 0<br> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]<br>
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]<br> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]<br> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]<br>
Region 4: I/O ports at ffa0 [size=16]<br><br>00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02) (prog-if 00 [UHCI])<br> Subsystem: Intel Corporation 82801AA USB Controller<br> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br>
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 0<br> Interrupt: pin D routed to IRQ 9<br> Region 4: I/O ports at d400 [size=32]<br>
<br>00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)<br> Subsystem: Intel Corporation 82801AA SMBus Controller<br> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br>
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Interrupt: pin B routed to IRQ 0<br> Region 4: I/O ports at 0540 [size=16]<br><br>00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)<br>
Subsystem: Hewlett-Packard Company Unknown device 1250<br> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br>
Latency: 0<br> Interrupt: pin B routed to IRQ 5<br> Region 0: I/O ports at dc00 [size=256]<br> Region 1: I/O ports at d800 [size=64]<br><br>01:02.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)<br>
Subsystem: Hewlett-Packard Company Unknown device 1247<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-<br> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br>
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes<br> Interrupt: pin A routed to IRQ 3<br> Region 0: I/O ports at bc00 [size=128]<br> Region 1: Memory at efdfff80 (32-bit, non-prefetchable) [size=128]<br>
Expansion ROM at e7b00000 [disabled] [size=128K]<br> Capabilities: [dc] Power Management version 2<br> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)<br> Status: D0 PME-Enable- DSel=0 DScale=2 PME-<br>
<br>------------------------------------------------------------<br><br>00:00.0 0600: 8086:7124 (rev 03)<br>00:01.0 0300: 8086:7125 (rev 03)<br>00:1e.0 0604: 8086:2418 (rev 02)<br>00:1f.0 0601: 8086:2410 (rev 02)<br>00:1f.1 0101: 8086:2411 (rev 02)<br>
00:1f.2 0c03: 8086:2412 (rev 02)<br>00:1f.3 0c05: 8086:2413 (rev 02)<br>00:1f.5 0401: 8086:2415 (rev 02)<br>01:02.0 0200: 10b7:9200 (rev 78)<br><br><br>The Super IO is a NSC PC87364<br><br>What can i do next because i realy need a linuxbios on the board. The bios chip can be remove from the motherboard.<br>
<br><br>thx benoit<br><br><br><br><div><span class="gmail_quote">2008/3/3, ron minnich <<a href="mailto:rminnich@gmail.com">rminnich@gmail.com</a>>:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
let's start with an lspci , lspci -v -v -v , lspci -n<br> <br><br> ron<br> </blockquote></div><br>