The current i810 code and asus/mew-am would be a good place to start, but you'll need the datasheets too (available on <a href="http://intel.com">intel.com</a>), because there are some subtle differences between i810 and i810e. You'll also have to switch the super IO. If you have any specific questions, feel free to ping me either on the list or IRC (c_ozzie), I wrote the i810 code but no longer have the board, and an i810e board but the bios is soldered on and in use 24/7. There are some comments in raminit.c that should tell you what values need to be harvested from the factory bios.<br>
<br>-Corey<br><br>On Thu, Mar 6, 2008 at 3:08 PM, giraut benoit <<a href="mailto:bgiraut@gmail.com">bgiraut@gmail.com</a>> wrote:<br><div class="gmail_quote"><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>Here are the results :<br><br>00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)<br>00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03)<br>
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)<br>00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)<br>00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02)<br>
00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02)<br>
00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)<br>00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)<br>01:02.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)<br>
<br>-------------------------------------------------<br><br>00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)<br> Subsystem: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub<br>
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-<br> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-<br> Latency: 0<br>
<br>00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03) (prog-if 00 [VGA])<br> Subsystem: Hewlett-Packard Company Unknown device 1243<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br>
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 0<br> Interrupt: pin A routed to IRQ 10<br> Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]<br>
Region 1: Memory at eff80000 (32-bit, non-prefetchable) [size=512K]<br> Capabilities: [dc] Power Management version 1<br> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)<br> Status: D0 PME-Enable- DSel=0 DScale=0 PME-<br>
<br>00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-<br> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br>
Latency: 0<br> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32<br> I/O behind bridge: 0000b000-0000bfff<br> Memory behind bridge: efd00000-efdfffff<br> Prefetchable memory behind bridge: e7b00000-e7bfffff<br>
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-<br> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-<br><br>00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)<br>
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 0<br>
<br>00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02) (prog-if 80 [Master])<br> Subsystem: Intel Corporation 82801AA IDE Controller<br> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br>
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 0<br> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]<br>
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]<br> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]<br> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]<br>
Region 4: I/O ports at ffa0 [size=16]<br><br>00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02) (prog-if 00 [UHCI])<br> Subsystem: Intel Corporation 82801AA USB Controller<br> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br>
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Latency: 0<br> Interrupt: pin D routed to IRQ 9<br> Region 4: I/O ports at d400 [size=32]<br>
<br>00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)<br> Subsystem: Intel Corporation 82801AA SMBus Controller<br> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br>
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br> Interrupt: pin B routed to IRQ 0<br> Region 4: I/O ports at 0540 [size=16]<br><br>00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)<br>
Subsystem: Hewlett-Packard Company Unknown device 1250<br> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-<br> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br>
Latency: 0<br> Interrupt: pin B routed to IRQ 5<br> Region 0: I/O ports at dc00 [size=256]<br> Region 1: I/O ports at d800 [size=64]<br><br>01:02.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)<br>
Subsystem: Hewlett-Packard Company Unknown device 1247<br> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-<br> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-<br>
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes<br> Interrupt: pin A routed to IRQ 3<br> Region 0: I/O ports at bc00 [size=128]<br> Region 1: Memory at efdfff80 (32-bit, non-prefetchable) [size=128]<br>
Expansion ROM at e7b00000 [disabled] [size=128K]<br> Capabilities: [dc] Power Management version 2<br> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)<br> Status: D0 PME-Enable- DSel=0 DScale=2 PME-<br>
<br>------------------------------------------------------------<br><br>00:00.0 0600: 8086:7124 (rev 03)<br>00:01.0 0300: 8086:7125 (rev 03)<br>00:1e.0 0604: 8086:2418 (rev 02)<br>00:1f.0 0601: 8086:2410 (rev 02)<br>00:1f.1 0101: 8086:2411 (rev 02)<br>
00:1f.2 0c03: 8086:2412 (rev 02)<br>00:1f.3 0c05: 8086:2413 (rev 02)<br>00:1f.5 0401: 8086:2415 (rev 02)<br>01:02.0 0200: 10b7:9200 (rev 78)<br><br><br>The Super IO is a NSC PC87364<br><br>What can i do next because i realy need a linuxbios on the board. The bios chip can be remove from the motherboard.<br>
<br><br>thx benoit<br><br><br><br><div><span class="gmail_quote">2008/3/3, ron minnich <<a href="mailto:rminnich@gmail.com" target="_blank">rminnich@gmail.com</a>>:</span><div class="Ih2E3d"><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
let's start with an lspci , lspci -v -v -v , lspci -n<br> <br><br> ron<br> </blockquote></div></div><br>
<br>--<br>
coreboot mailing list<br>
<a href="mailto:coreboot@coreboot.org">coreboot@coreboot.org</a><br>
<a href="http://www.coreboot.org/mailman/listinfo/coreboot" target="_blank">http://www.coreboot.org/mailman/listinfo/coreboot</a><br></blockquote></div><br>