# !!! NOTE !!!
# Do NOT add spaces or comments at the end of option lines.
# It confuses some versions of make.

# Use grub instead of autoboot?
USE_GRUB = 1

# Grub menu.lst path
MENULST_FILE = "hda3:/boot/filo/menu.lst"
# Via Epia-MII CF boot:
#MENULST_FILE = "hde1:/boot/filo/menu.lst"

# time before default menu.lst is chosen. Set to 0 to ignore
MENULST_TIMEOUT = 5

###Default parameters for Autoboot (if USE_GRUB is set to 0)
# Image filename for automatic boot and optional command line parameter
AUTOBOOT_FILE = "hda3:/vmlinuz root=/dev/hda3 console=tty0 console=ttyS0,115200"
#AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda3"
#AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda3 console=tty0 console=ttyS0,115200"
#AUTOBOOT_FILE = "mem@0xfff80000"
#AUTOBOOT_FILE = "hde1@0"
#AUTOBOOT_FILE = "uda1:/vmlinuz.elf"
#AUTOBOOT_FILE = "flashb@0x00400000,0x154a00 console=tty0 console=ttyS0,115200"

# Time in second before booting AUTOBOOT_FILE
AUTOBOOT_DELAY = 2

# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
IDE_DISK = 1

# Add a short delay when polling status registers 
# (required on some broken SATA controllers)
# NOTE: Slows down access significantly, so disable 
# whenever possible.
#IDE_DISK_POLL_DELAY = 1

# SATA drives seem to have problems reporting their spinup.
# This will delay FILO start by 5s so the disks have some time to settle.
# (required on some broken SATA controllers)
# NOTE: Slows down access significantly, so disable 
# whenever possible.
#SLOW_SATA = 1

# Use PCMCIA compact flash on Via Epia MII10000 and MII6000E
# This device is referred to as hde.
PCMCIA_CF = 0

# Driver for USB Storage
USB_DISK = 0

# Driver for NAND flash storage
FLASH_DISK = 0

# VGA text console
VGA_CONSOLE = 1
PC_KEYBOARD = 1

# Serial console 
SERIAL_CONSOLE = 1
SERIAL_IOBASE = 0x3f8
# if SERIAL_SPEED is commented out, the speed will not be changed.
SERIAL_SPEED = 115200

# Filesystems
FSYS_EXT2FS = 1
FSYS_FAT = 1
FSYS_JFS = 0
FSYS_MINIX = 0
FSYS_REISERFS = 1
FSYS_XFS = 0
FSYS_ISO9660 = 1
FSYS_CRAMFS = 0
FSYS_SQUASHFS = 0

# Support for boot disk image in bootable CD-ROM (El Torito)
ELTORITO = 1

# PCI support
SUPPORT_PCI = 1

# Enable this to scan PCI busses above bus 0
# AMD64 based boards do need this.
PCI_BRUTE_SCAN = 1

# Sound support (needs SUPPORT_PCI)
SUPPORT_SOUND = 0

# Sound drivers
VIA_SOUND = 0

# Debugging
DEBUG_ALL = 0
DEBUG_ELFBOOT = 0
DEBUG_ELFNOTE = 0
DEBUG_LINUXBIOS = 0
DEBUG_MALLOC = 0
DEBUG_MULTIBOOT = 0
DEBUG_SEGMENT = 0
DEBUG_SYS_INFO = 0
DEBUG_TIMER = 0
DEBUG_BLOCKDEV = 0
DEBUG_PCI = 0
DEBUG_VIA_SOUND = 0
DEBUG_LINUXLOAD = 0
DEBUG_IDE = 0
DEBUG_USB = 0
DEBUG_ELTORITO = 0
DEBUG_FLASH = 0
DEBUG_ARTECBOOT = 0


# i386 options

# Loader for standard Linux kernel image, a.k.a. /vmlinuz
LINUX_LOADER = 1

# Loader for Windows CE image
# Leave disabled for now. Not supported.
WINCE_LOADER = 0

# Artecboot loader support
ARTEC_BOOT = 0

# Boot FILO from Multiboot loader (eg. GRUB)
MULTIBOOT_IMAGE = 0

