Fixup the abuild target to make the ROM that same way as the real target.


Signed-off-by: Marc Jones <marc.jones@amd.com>

Index: coreboot-v2/targets/tyan/s2912_fam10/Config-abuild.lb
===================================================================
--- coreboot-v2.orig/targets/tyan/s2912_fam10/Config-abuild.lb	2008-08-20 11:29:46.000000000 -0600
+++ coreboot-v2/targets/tyan/s2912_fam10/Config-abuild.lb	2008-08-20 09:47:19.000000000 -0600
@@ -18,25 +18,30 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##
 
-target tyan_s2912_fam10
-mainboard tyan/s2912_fam10
+target VENDOR_MAINBOARD
+mainboard VENDOR/MAINBOARD
+
+option CC="CROSSCC"
+option CROSS_COMPILE="CROSS_PREFIX"
+option HOSTCC="CROSS_HOSTCC"
 
 __COMPRESSION__
 
-romimage "fallback"
-	option USE_FALLBACK_IMAGE=0
-	option ROM_IMAGE_SIZE=0x3f0000
-	option XIP_ROM_SIZE=0x40000
+option ROM_SIZE=1024*1024
+
+romimage "fallback" 
+	option USE_FALLBACK_IMAGE=1
+	option ROM_IMAGE_SIZE=0x3f000
 	option COREBOOT_EXTRA_VERSION=".0-fallback"
 	payload __PAYLOAD__
 end
 
-romimage "failover" 
-	option USE_FALLBACK_IMAGE=1
-	option ROM_IMAGE_SIZE=0x3f0000
-	option XIP_ROM_SIZE=0x40000
+romimage "failover"
+	option USE_FAILOVER_IMAGE=1
+	option USE_FALLBACK_IMAGE=0
+	option ROM_IMAGE_SIZE=FAILOVER_SIZE
+	option XIP_ROM_SIZE=FAILOVER_SIZE
 	option COREBOOT_EXTRA_VERSION=".0-failover"
-	payload __PAYLOAD__
 end
 
 buildrom ./coreboot.rom ROM_SIZE "fallback" "failover"
