Linux version 2.6.27-rc5-00100-gec0c15a (vince@quad) (gcc version 4.3.1 (Gentoo 4.3.1-r1 p1.1) ) #19 SMP Wed Sep 3 21:11:57 CEST 2008 Command line: apic=debug debug kgdbwait irqpoll loglevel=8 earlycon=uart8250,io,0x3f8,115200n8 earlyprintk=serial,ttyS0,115200 acpi=off root=/dev/sda3 console=tty0 console=ttyS0,115200 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Early serial console at I/O port 0x3f8 (options '115200n8') console [uart0] enabled last_pfn = 0x7fff0 max_arch_pfn = 0x3ffffffff init_memory_mapping 0000000000 - 007fe00000 page 2M 007fe00000 - 007fff0000 page 4k kernel direct mapping tables up to 7fff0000 @ 8000-c000 last_map_addr: 7fff0000 end: 7fff0000 DMI 2.2 present. (5 early reservations) ==> bootmem [0000000000 - 007fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000740c18] TEXT DATA BSS ==> [0000200000 - 0000740c18] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. found SMP MP-table at [ffff8800000f3930] 000f3930 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007fff0 On node 0 totalpages: 524175 DMA zone: 2495 pages, LIFO batch:0 DMA32 zone: 513064 pages, LIFO batch:31 Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #1 Bus #0 is PCI Bus #1 is PCI Bus #2 is PCI Bus #3 is PCI Bus #4 is PCI Bus #5 is PCI Bus #6 is ISA I/O APIC #2 Version 17 at 0xFEC00000. Int: type 0, pol 3, trig 3, bus 00, IRQ 04, APIC ID 2, APIC INT 0c Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 0a Int: type 0, pol 3, trig 3, bus 00, IRQ 08, APIC ID 2, APIC INT 0b Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0c Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 03 Int: type 0, pol 3, trig 3, bus 05, IRQ 18, APIC ID 2, APIC INT 05 Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05 Int: type 0, pol 3, trig 3, bus 02, IRQ 00, APIC ID 2, APIC INT 0c Int: type 0, pol 3, trig 3, bus 00, IRQ 1c, APIC ID 2, APIC INT 0b Int: type 0, pol 3, trig 3, bus 00, IRQ 20, APIC ID 2, APIC INT 0a Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00 Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01 Setting APIC routing to flat Processors: 2 mapped APIC to ffffffffff5fc000 ( fee00000) mapped IOAPIC to ffffffffff5fb000 (00000000fec00000) Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) PERCPU: Allocating 33056 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 8, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515559 Kernel command line: apic=debug debug kgdbwait irqpoll loglevel=8 earlycon=uart8250,io,0x3f8,115200n8 earlyprintk=serial,ttyS0,115200 acpi=off root=/dev/sda3 console=tty0 console=ttyS0,115200 Misrouted IRQ fixup and polling support enabled This may significantly impact system performance Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: Using PIT calibration value Detected 1809.243 MHz processor. spurious 8259A interrupt: IRQ7.