Since i have no idea what are you two talking about, im attaching the link to the current BIOS datasheet (which shows the current BIOS has a 2MB flash size, if i understand this correctly) : http://www.datasheetcatalog.org/datasheet/stmicroelectronics/8499.pdf<br /><br />On Nov 1, 2008 1:53am, Corey Osgood <corey.osgood@gmail.com> wrote:<br />> > cpu:         Socket370 Intel Pentium III Celeron<br />> <br />> > northbridge:    Intel 82810E<br />> <br />> > southbridge:    Intel 8281AA<br />> <br />> > mainboard:    810 R 4.1 with lan<br />> <br />> > super i/o:    Winbond W8362F-AW<br />> <br />> > bios device:    ST M50FW002<br />> <br />> <br />> <br />> Are you sure it's SPI?<br />> <br />> <br />> <br />> -Corey<br />> <br />> <br />> <br />> On 10/31/08, Elia Yehuda  wrote:<br />> <br />> > many thanks. i will try the patch tomorrow night when i'm back at home and<br />> <br />> > report back.<br />> <br />> ><br />> <br />> > On Fri, Oct 31, 2008 at 8:38 PM, Peter Stuge  wrote:<br />> <br />> ><br />> <br />> >> Hi,<br />> <br />> >><br />> <br />> >> z4ziggy@gmail.com wrote:<br />> <br />> >> > No EEPROM/flash device found.<br />> <br />> >> > If you know which flash chip you have, and if this version of flashrom<br />> <br />> >> > supports a similar flash chip, you can try to force read your chip. Run:<br />> <br />> >> > flashrom -f -r -c similar_supported_flash_chip filename<br />> <br />> >> ><br />> <br />> >> > Note: flashrom can never write when the flash chip isn't found<br />> <br />> >> > automatically.<br />> <br />> >><br />> <br />> >> The above note is sadly not a joke.<br />> <br />> >><br />> <br />> >><br />> <br />> >> Corey Osgood wrote:<br />> <br />> >> > AFAIK, flashrom is broken for most ICHx.<br />> <br />> >><br />> <br />> >> Not so, it works very well on a whole bunch of them.<br />> <br />> >><br />> <br />> >><br />> <br />> >> Carl-Daniel Hailfinger wrote:<br />> <br />> >> > On 30.10.2008 16:57, z4ziggy@gmail.com wrote:<br />> <br />> >> > > any plans on fixing the issue or using alternative? is there a<br />> <br />> >> > > way i can assist?<br />> <br />> >> ><br />> <br />> >> > Your flash chip is not supported. I'll add code for it.<br />> <br />> >><br />> <br />> >> Some info Carl-Daniel didn't post, maybe it is informative;<br />> <br />> >><br />> <br />> >> It seems that the system has a Winbond W25B40 or W25B40A flash chip.<br />> <br />> >> This is an SPI flash chip, but it seems to behave just like a FWH<br />> <br />> >> type chip.<br />> <br />> >><br />> <br />> >> While waiting for Carl-Daniel you can try the attached patch. I doubt<br />> <br />> >> it will work but you never know.<br />> <br />> >><br />> <br />> >><br />> <br />> >> //Peter<br />> <br />> >><br />> <br />> >> --<br />> <br />> >> coreboot mailing list: coreboot@coreboot.org<br />> <br />> >> http://www.coreboot.org/mailman/listinfo/coreboot<br />> <br />> >><br />> <br />> ><br />>